In with the good, out with the bad! Abstrax® Chinook replicates the terpene profile found in Chinook hops while omitting undesirable compounds found in hop vegetal matter
Flavor/Aroma: Woody, Pine, Floral
The perfect hop: Using hop and botanically-derived terpenes, Abstrax builds exact profiles to match the flavor and aroma of an exemplary lot of Chinook hops
Consistent results every time. Eliminates the variance of using hops that may differ by age, crop year, storage conditions, growing region, processing method or farm
Choose your own adventure—add as little or as much as you want. Dial in your hop character post fermentation
Boost your brew by turning it up to 11. IPA not jumping out of the glass? Dose and drop into an incredible olfactory experience instantly!
Chinook
Robust and versatile, the 2021 crop of this varietal was aromatically complex. Chinook captures the spicy pine, resinous wood, floral grapefruit, and tropical notes that make it perfect for everything from IPAs to barley wine and stouts.
Optimized Hop Extracts
When you extract the oil from hops, no matter how good your extraction is, you’ll always wind up with certain undesirable plant compounds. Abstrax Omni Hop Profiles are true-to-type optimized hop extracts without any of the undesirable notes typically found in other dry-hop aroma oils.
The Power of Terpenes
Abstrax Omni Hop Profiles are created by using individual terpene isolates. Think of them like little building blocks. We assemble them together to create an exact profile of the original hop with ZERO undesirable compounds. The result is an extremely potent and accurate profile of the original hop utilizing the power of terpenes.
Extremely Concentrated
A little really goes a long way here. Omni Hop Profiles are made from the essential building blocks of flavor and aroma so they’re naturally potent.
Dosage
Use at a rate of 2.5 mL per 5-gallon batch. Add at any point on the cold side in your fermenter, keg, or bottling bucket. Or even add a drop or two to spike your finished beer in the glass.
Features:
100% efficient flavor/aroma transfer
Consistent from batch to batch
Increase in yield/profit 5-30%
Omni Hop Profiles will not affect IBU test results and they cannot cause lightstruck off-flavors
Zero Undesirable Plant Compounds
No Lipids
No Chlorophyll
Recommended storage: 40-90°F. Do not freeze.
Make that Dank IPA LOUD with a hit of cannabis terpene extracts
Abstrax®, the most reputable terpene brand in the cannabis industry, is now granting brewers access to the amazing aromas found in your favorite strain
The Chronic - Replicates the terpene profile found in Super Sour Diesel cannabis
Super Silver Haze and Sour Diesel come together to provide bursting Citrus and Dank aromas
Feeling Good! Terpenes function as mood enhancers; this Super Sour Diesel will have you feelin Energized and Inspired
420 Friendly - Contains no THC and no CBD. Legal worldwide
Super Sour Diesel
This leg of the Cannabis Hops Reunion Tour is fueled with face-melting gasoline from Super Sour Diesel. Earthy layers of crisp pine and bright, zesty citrus fuse for a dank, shred-worthy solo that deserves an encore.
BrewGas Series
A collection of the world’s gassiest and skunkiest cannabis profiles. If you’re a cutting-edge brewer looking to impart the authentic flavor and aroma of cannabis into your next beer, then look no further. BrewGas is water-soluble, uses only natural ingredients, and it’s TTB-approved. It’s flowable, doesn’t stick to the tank, and contains no THC so it’s legal everywhere.
True-to-Type Botanically Derived Cannabis Profiles
Cannabis and hops are members of the same genetic family but they’ve been historically kept apart by prohibition. With cannabis making its way into the mainstream, Abstrax is able to bring novel ingredients like terpenes to the brewer for the first time. We're here to reunite the family.
Dosage
Add 2.5 mL per 5-gallon batch for a moderate dank impact. Adjust to taste. Add at any point on the cold side in your fermenter, keg, or bottling bucket. Or even add a drop or two to spike your finished beer in the glass.
Features:
Scalable
TTB Aproved
Legal Worldwide
No THC / No CBD
Water Soluble
Powered by Terpenes
Repeatable
Recommended storage: 40-90°F. Do not freeze.
Disclaimer: This product is not intended to be inhaled, vaped, smoked, combusted, or anything similar. This is a food and beverage product. Seriously. Don’t vape these. You’ll have a bad time.
Make that Dank IPA LOUD with a hit of cannabis terpene extracts
Abstrax®, the most reputable terpene brand in the cannabis industry, is now granting brewers access to the amazing aromas found in your favorite strain
The Chronic - Replicates the terpene profile found in Gelato cannabis
Sunset Sherbert and Thin Mint Girl Scout Cookies come together to provide bursting Berry and Earthy aromas
Feeling Good! Terpenes function as mood enhancers; this Gelato will have you feeling Peaceful and Relaxed
420 Friendly - Contains no THC and no CBD. Legal worldwide
Gelato
Brewers be warned. Berry-forward Gelato brings an exotic blast of blueberry, grape, and the perfect touch of earthy spice and citrus. Cannabis and hops were always destined to reunite, but no one expected it would be this dank.
BrewGas Series
A collection of the world’s gassiest and skunkiest cannabis profiles. If you’re a cutting-edge brewer looking to impart the authentic flavor and aroma of cannabis into your next beer, then look no further. BrewGas is water-soluble, uses only natural ingredients, and it’s TTB-approved. It’s flowable, doesn’t stick to the tank, and contains no THC so it’s legal everywhere.
True-to-Type Botanically Derived Cannabis Profiles
Cannabis and hops are members of the same genetic family but they’ve been historically kept apart by prohibition. With cannabis making its way into the mainstream, Abstrax is able to bring novel ingredients like terpenes to the brewer for the first time. We're here to reunite the family.
Dosage
Add 2.5 mL per 5-gallon batch for a moderate dank impact. Adjust to taste. Add at any point on the cold side in your fermenter, keg, or bottling bucket. Or even add a drop or two to spike your finished beer in the glass.
Features:
Scalable
TTB Aproved
Legal Worldwide
No THC / No CBD
Water Soluble
Powered by Terpenes
Repeatable
Recommended storage: 40-90°F. Do not freeze.
Disclaimer: This product is not intended to be inhaled, vaped, smoked, combusted, or anything similar. This is a food and beverage product. Seriously. Don’t vape these. You’ll have a bad time.
Replacement Inner Nylon Sack for Speidel Bladder Press. This nylon sack fits just inside the Stainless pressing screen prior to loading the press and provides a quick and easy way to manage the pressed pommace.
20L -- GER101S
40L -- GER102S
90L -- GER104 / GER104S
180L -- GER106
Dump out the ice slurry from your jockey box without dumping out your draft coils
Designed to pair with KegLand's Square Draft Coils
Use the bracket holes as a guide for where to drill your shank holes
These specially designed shank brackets from KegLand are a great accessory to pair with the Square Draft Coils for your custom jockey box build. The retention brackets will secure the coils in place so they don't come spilling out when you empty the ice slurry from your jockey box after use.
Use the brackets as a guide to mark where to install your draft shanks, then mount them above the square coils and secure in place with the shank hex nuts.
KegLand Part Number: KL40440
ForgeFit's rubber hose bumper is the ideal choice for brewery hose ends. Rather than being made from rigid plastic, the soft silicone is designed to absorb impact and help protect hose end fittings that are being continuously picked up and dropped to the floor. The bumper will also keep the hose ends raised off the floor to keep the fittings sanitized and avoid contamination. The two large handles allow you to pick up a hot hose without grabbing onto it directly.
This bumper requires some forceful stretching to get over the 1.5" TC fitting.
1.49" ID to stretch over most 1" brewery hoses.
The KOMOS Deluxe Kegerator model boasts the same features as the standard model with an eye-catching stainless steel extrerior and upgraded stainless steel drip tray. The interior is designed to fit up to four 5-gallon ball lock kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless door and exterior, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless steel door, top cover, and side panels Stainless Countertop Style Drip Tray Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 See below for the Kegerator Instruction Manual. (The Deluxe Kegerator does not have feauture a Guard Rail as seen in the residental kegerator instructions.) Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
This adapter piece enables legacy Torpedo Mini CO2 Regulators (KEG965A) to be compatible with 74g CO2 cartridges that have a small unthreaded gap at the top of the neck—cartridges similar to KEG969. This piece now comes standard on the updated Torpedo Mini CO2 Regulator and is a direct replacement part for KEG965B.
Premium Counter-Pressure Bottle filler that is designed for the smaller craft brewer or dedicated homebrewer to help make bottling day faster and more efficient
The four separate filling heads have individual Stainless Steel 3-way control valves that allow for quick fill rates
Only requires one person to operate
A single PRV provides equal backpressure on all heads resulting in matching flow rates without adjustment
Individual purge valves on each fill head allow for nearly all oxygen removal in a bottle, ensuring that the beer stays fresh for longer
The removable drip tray is fully draining with a barbed outlet for constant filling and easy cleaning
A purge valve on the reservoir helps make sure that foam never builds up
304 Stainless Steel Construction and easy-to-use functionality, all resulting in a top-of-the-line bottle filler
Introducing the newly redesigned and updated G2 Medusa Multihead Counter Pressure Bottle Filler! This unique unit was designed in-house by the MB Pro Engineering team and purpose built for the smaller craft brewer or dedicated homebrewer. The Medusa will speed up bottling day while also reducing exposure to oxygen during the bottling process, resulting in higher quality beer with a longer shelf life.
The Medusa Multihead Counter Pressure Bottle Filler can be adjusted to cater all bottling needs. All four heads can be operated individually, and the height, back pressure, and fill speeds can be adjusted for various bottle styles. We've done our best to pack this unit with features that will handle all jobs, while keeping costs as low as possible.
Features:
3-way stainless steel valves on both inlet & back pressure sides of all fill heads.
Improved Pressure Relief Valve has higher accuracy over fill rates, and directs foam into the drip tray rather than onto your bottles.
Robust stainless steel frame stands on its own or can be easily bolted or clamped to a work surface
Stainless steel fill reservoir keeps fill rates equal & reduces foaming
Inverted fill tubes & reservoir purge means cleaner filling with even less possibility for foam.
Dual TC Fill reservoir is easier to clean & allows for upgrades down the road (as they become available).
Easily adaptable to fill from nearly any pressurized vessel.
Height is adjustable from shorty bottles to growlers.
Easy disassembly for cleaning, storage & maintenance,
Sanitary 1.5" TC inlet for beer (Clamp and Gasket sold separately)
3/8" tube connection for CO2.
Backpressure Bar allows for a single adjustment point for fill rates. No more adjusting PRVs on each fill head.
Minimum Bottle Height: 6.9"
Maximum Bottle Height: 16.5"
Maximum Working Pressure: 15 PSI
Dimensions:
Footprint: 26-3/8" L x 8" W
Drip Tray: 23-1/2" L x 5-1/2" W
Overall Height: 25-3/8"
Please Note: Filler valves include a Teflon gasket. Do not soak the valves in PBW which can corrode Teflon material after prolonged contact.
Sometimes a single draft tower isn't enough for your dream home bar or kegerator. If you're building out a draft system that will have more than four faucets, we highly recommend the KOMOS Double T Bar Draft Tower. Available in 6-tap and 8-tap models, these towers provide ample room for your faucets and will give your draft setup a much cleaner look than having multiple single-column towers. Perfect for upgrading an existing KOMOS Double-Wide Kegerator with two individual towers or designing your own home bar or kegerator. Mounting hardware, tower collars and gaskets included. The tower does not include faucets, shanks, tap handles, or draft tubing. Assembly To assemble the tower, remove the dust caps on either side and remove the foam insulation. Start with the inner most shank hole on either side and work your way outward. We recommend installing each shank and attaching the draft tubing before moving on to the next shank hole. The top section of the tower is 5" in diameter, so most people should be able to reach inside to install the shanks by hand or with the help of a draft wrench. When all the shanks have been mounted, reinsert the foam insulation. The tower may come with more insulation than needed and may need to be cut thinner before reinserting. We recommend using the Double Offset Shank Wrench to help with assembly. Duotight Compatible Tower Shanks We highly recommend pairing the draft tower with Intertap Tower Shanks with Duotight Compatible Barb. When it comes to assembly, there's nothing easier than Duotight push-to-connect fittings, and the same goes for whenever you might need to disassemble a line for cleaning. Duotight fittings pair perfectly with EVABarrier draft tubing, our preferred beer & gas tubing that offers superior protection from oxidation, CO2 loss, and microbial growth. Tower Dimensions: 29.5" L x 5" D x 16" H. The centers of the columns are approximately 16" apart. Not compatible with the KOMOS Olympus III kegerator.
Jazz up your kegerator, home bar or commercial beverage dispensary with these stylish decal holders. Clamps directly on to the beer shank coupling nut so you don't have to remove the faucet to put on the decal holder or to swap out the decal itself. Made from chrome plated plastic with a soft padding to protect your draft components from scratches. Easily attach or remove the decal holder with a philips head screw dirver. This unit will fit an 82 mm (3.2") diameter decal, sticker or label. Also avaialbe in 73 mm (2.8") diameter. KegLand Part Number: KL0088
This 3-way stainless steel tee is perfect for splitting gas lines to push multiple kegs with one CO2 cylinder. Slightly oversized at 13 mm OD (0.51") for a tighter fit with 1/2" ID tubing.
With the MoreBeer! Jockey Box your beer will pour cold for hours! Take it camping, tailgating, or just pull it out when the gang is over. A Jockey box (or draft box) is a portable dispensing system used to cool beer as it travels inline from the keg to the faucet. The MoreBeer! Jockey Box includes an insulated cooler, a 50' x 3/8" stainless steel coil, shank and beer line clamps.
Our jockey box does not include a faucet or tap handle as standard, allowing you to pair it with the faucet model of your choice. Select your desired faucet from our add-on system above.
A favorite innovation in our draft box design is that we use larger 3/8" OD stainless steel tubing, which has two advantages over designs offered by other companies:
It cools a greater volume of beer, and cools it faster. The coil will hold approximately 33 oz of beer at a time.
The larger diameter line offers less resistance, which lets you push the beer with less CO2 pressure. Our boxes require about 10-15 psi from the CO2 tank to push the beer from the keg to the faucet (same pressure you use to dispense at home). Because the vast majority of beer lovers opt to keep their beer cool at all times to protect flavor (especially a homebrewer who is going to retap the same kegs at home!) and reduce foaming issues, most people opt to also ice the keg. The low applied pressure of 10-15 psi means that if you leave the system hooked up overnight, the beer will not over carbonate. If you do not plan on keeping the keg cold, which is perfectly fine, our system still works great because you can disconnect the line (if left for days) to keep the beer from losing carbonation.
We do not use shanks on the back side of our boxes. We drill holes slightly smaller than the line size so that a tight seal is created but you can still pull the line in when not in use, without having a wrench on hand. This makes storage and transport extremely easy. You will appreciate not having lines flopping everywhere.
You will need to purchase the appropriate keg couper for your commercial keg or quick disconnects for your homebrew keg. You will also need a CO2 system, comprised of a CO2 tank and regulator.
Tips For Best Results:
It is much more likely for a beer left at a high psi to overcarbonate (become foamy) than a beer left at a low psi to lose carbonation. The reason is that gas will always keep coming from the regulator until the gas/beer pressure have reached an equilibrium, so over time the high psi setting becomes the pressure in the beer. However, for a beer to lose carbonation it has to come out of solution into the headspace in the keg. Because the headspace is limited, only so much CO2 can come out, and the keg pressure will not drop all the way down to the lower regulator pressure on its own. This is the reason that if you have overcarbonated a beer you have to repeatedly vent the keg, reducing the pressure in the headspace to 0, and allowing more gas to escape from the beer.
For the best performance when using a draft box, tests have shown that ice water is actually the most effective at cooling the coils. So, as the ice melts, do not open the drain valve on the cooler. Draft boxes with Cooling Plates (stainless coil embedded in aluminum) are designed to work with the valve open, ours is not.
1/4" tailpieces are ideally used with 3/16" draft line for a tight fit. If you'd prefer to use a different size tubing, the KOMOS coupler can also be purchased bare so you can mix and match your preferred tailpiece sizes. The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port. D-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)
Add the convenience of quick disconnects to your commercial sanke couplers. The K-Lok QD system will allow you to easily connect and disconnect your draft lines from your keg coupler with no spilling or loss of gas. This K-Lok Male x Male Beer Thread (5/8" BSP) is designed to be attached to your gas line and then connected to the K-Lok Female fitting attached to your keg coupler's gas in port. The built-in check valve prevents gas from draining out of your line when it's disconnected so it's a dry break. Draft lines can be connected to the Male Beer Thread end using a Duotight Adapter for EVABarrier tubing or Hex Nut & Tailpiece for other draft tubing. KegLand Part Number: KL04923
The KOMOS Stout & Cold Brew Coffee Kegerator comes with NukaTap faucets with Stout Spout attachments to give your beverage an extra creamy pour. Every unit also comes with an adapter to use the included KOMOS CO2 regulator with a Nitrogen gas cylinder. For each faucet, you will also receive the standard faucet spout so you can mix and match your taps and use some for Stout or Cold Brew and some for serving beer, soda, or other beverages. Serving with Nitrogen Nitrogen cylinders can be filled with either pure nitrogen or "Beer Gas", which is a blend of Nitrogen and CO2. Pure nitrogen is recommended for serving cold brew coffee in order to avoid the effects of carbonation. Carbonic acid dissolving into solution will change the mouthfeel of your cold brew and heighten the acidity and bitterness. Stouts, on the other hand, are commonly served with a mix of Nitrogen and CO2, and will give your pours that signature Guinness-like cascade of bubbles as CO2 is knocked out of solution when it passes through the stout spout's aerator disc. Beer gas can also be used to serve other styles of beer, or you can feed a pure CO2 line into the kegerator from a separate CO2 tank. Please note that the kegerator only includes one regulator and does not include a nitrogen cylinder. An empty nitrogen tank can be added to your order above. If you plan to use two different types of gas, you will need to purchase a second regulator and gas cylinder. NukaTap Forward Sealing Faucets NukaTap is the newest brand of forward sealing faucets that boast a lower thermal mass for reduced first pour foam. They feature a "nuke-shaped" internal shuttle that is made from TPV, which provides superior laminar flow to further reduce foaming issues. If you prefer all stainless steel components in your beer faucet, we would suggest the kegerator configuration that comes with Intertap faucets. All faucet spout attachments and accessories are cross compatible between Intertap and NukaTap. KOMOS Kegerator The KOMOS Kegerator offers a stunning set of features that clearly separate this unit as the most modern kegerator on the market. With more interior space than other models, the KOMOS Kegerator is designed to fit up to four 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. Whether you choose the single, double, triple, or quad tap configuration, you'll receive NukaTap stainless steel faucets, the newest in forward-sealing faucet design. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Rather than a chrome plated tower, the NukaTap faucets are mounted to a stainless steel tower that remains cool before, during, and after each pour thanks to a tower fan diverter that recirculates cold air within the kegerator and blows it up into the tower to keep your beer lines cold and reduce foaming. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26–82°F, dual gas inlets at the back, aluminum internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator. The most eye-catching difference between the KOMOS unit and other kegerators is definitely the capacity. This is the first kegerator we have offered that comes with a quadruple tap tower option, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. KOMOS positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers
The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. NukaTap Stainless Faucets and Towers All kegerators come with either NukaTap faucets for mounting on the stainless tower. NukaTap is the newest brand of forward sealing faucets that boast a lower thermal mass for reduced first pour foam. They feature a "nuke-shaped" internal shuttle that is made from TPV, which provides superior laminar flow to further reduce foaming issues. If you prefer all stainless steel components in your beer faucet, we would suggest the kegerator configuration that comes with Intertap faucets. All faucet spout attachments and accessories are cross compatible between Intertap and NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. The modular, threaded spout can fit a variety of attachments including a growler filler or stout spout. This model includes the all stainless faucet which we think is a must have upgrade over chrome plated brass. Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. KOMOS Regulator
The included high quality KOMOS regulator maintains consistent pressure. The regulator includes a blow-off PRV with pull ring for safety and relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Best Value & Backed by MoreBeer!
We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Stainless Steel Forward-Sealing Faucets (choose number of taps above) Stout Spouts and Standard Spouts for each faucet Robust KOMOS Dual Gauge CO2 Regulator with included Nitrogen tank adapter Stainless Steel Air Cooled Tower Duotight Fittings make connecting draft lines a breeze Digital Thermostat with wide 26 - 82° F temp range. CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Countertop Style Drip Tray Aluminum floor for additional keg support Includes EVABarrier beer and gas tubing Beverage line measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line measures 5mm ID x 8mm OD 1 x line of varying length depending on number of taps (2, 2.5, or 3m) 4 Tap model includes uncut rolls of bev & gas line We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.) Gas lines can be cut to whatever length best suits your needs Duotight adapters for draft shank and regulator connections Duotight tee fittings for splitting gas lines (2, 3, 4 tap only) You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny For ball lock and pin lock disconnects we recommend DUO106 For commercial sanke keg couplers we recommend DUO104 Available Kegerator covers and "off road" casters for moving over uneven terrain Detailed instructions on assembly and use Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall (fridge only) 35" with Caster wheels 48.75" with tower 51" with Casters and Tower 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 6 Gal. Torpedo Keg - 3 5 Gal. Megamouth Torpedo Keg - 1 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 See below for the Kegerator Instruction Manual. Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less. Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
With this adapter you can use a KOMOS CO2 regulator with a Nitrogen or Argon tank. Not all CO2 Regulators are suitable for use with a Nitrogen tank. Only for use with KOMOS regulator which is a dual gas regulator capable of handling Nitrogen and CO2 gasses. CGA320 male thread by CGA580 male thread. Compatible with KOMOS Dual Gauge and Dual Body regulators.
Keep your draft system dialed in with this regulator gas board for Duotight In-Line Regulators. The gas board can hold up to six regulators, allowing you to monitor and adjust the pressure going to each keg. In the example photo, the high pressure from the gas cylinder is fed to the regulator on the left, and then stepped down from there with the lowest pressure line in the right-most position. The holes for wall mounting the board and the holes for mounting the regulators are pre-drilled for easy installation. Made from food-grade polypropylene plastic. Regulators, fittings, labels, and mounting hardware are not included. For a fully rigged gas board, we recommend the following parts: 6 x Inline Regulators 12 x Rigid 8mm Joiners 5 x Duotight 8mm Tee Pieces 1 x Duotight 8mm Elbow These items can be found below under You Might Also Need. KegLand Part Number: KL17718
The KOMOS Rubicon Jockey Box is the ideal option for serving beer at your next cookout, tailgater, or camping trip. This dual tap jockey box is built around the ultra-tough, rotomolded Rubicon Cooler and features the aluminum cast cold plate for compact, efficient cooling. Everything you need to rig up the draft box is included and only takes minutes to assemble. Along with the cooler and cold plate, you'll receive stainless steel forward-sealing Intertap faucets, stainless Intertap shanks, self-closing faucet springs, tap handles, EVABarrier draft line, and Duotight fittings for all connections. Rubicon Cooler With durable rotomolded body, high density polyurethane insulation and compression seal lid, the Rubicon will hold ice for days on end, even in the hottest of climates. Rotomolding is a procedure that ensures every part of the cooler is made with a continuous thick wall with minimal imperfections. This makes the cooler extremely tough, and is one of the features that have made YETI® coolers such a hit. High density polyurethane foam walls offer superior insulation compared to cheaper ice chest options, which means ice will hold for far longer and ensure your jockey box doesn't warm up before you're done pouring beers. There are certainly cheaper jockey boxes out there, designed with far cheaper coolers, but none of them will stand up to the Rubicon's long-lasting performance. Cold Plate The Cold Plate is made from rugged aluminum casting with a large thermal mass for excellent heat absorption. High conductivity aluminum alloy aids the heat transfer as your beverage travels through the internal 18 ft. long stainless steel lines. We love cold plates for low volume applications, as they're easy to connect to, easy to store, and leave plenty of room in the cooler for other food or beverages. Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line. We love it in the KOMOS commercial and residential kegerators, and we're excited to see the same ease-of-assembly introduced to jockey boxes. Duotight fittings offer a quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your jockey box will feature the same first-class tubing. We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. Features:
Rubicon Cooler Rotomolded body High density polyurethane insulation Lockable compression lid with high quality seal Polyester rope handles with molded grips Rubber feet Side drain outlet 23.5" x 16.25" x 16.5" Cold Plate Aluminum cast 18 ft. internal lines made from 304 stainless steel 1/4" male flare connections 15" x 10" x 1" 2 x Intertap Stainless Faucets w/ Self-Closing Springs 2 x Intertap Stainless Draft Shanks 2 x Black Plastic Tap Handles 39 ft. roll of EVABarrier tubing (8 mm OD x 5mm ID) Duotight push-in fittings for all connections
To get the best pour possible you want to make sure your glass is free of dust, debris, and dish soap residue. The easiest way to do this is with a quick rinse of cold water right before pouring beer into the glass. This drip tray features a push-activated jet that can be hooked up to a pressurized keg or main water supply. To give your glass a quick spritz, simply press it down on the rinsing platform to activate the jet. The drip tray also has a pre-plumbed drain outlet to run to a nearby bucket or drain. For best results feed the jet clean, cold water at a pressure between 15 to 60 psi. If directly connecting to your main water supply, we recommend using an inline regulator to lower the water pressure as needed.
Specs:
Drain outlet - 1/2" OD
Water inlet - 1/4" OD
Glass Rinser - 4.25" diameter
Drip Tray - 18.1" x 7.1" x 1.2"
Made from 304 stainless steel
Kegland Part number: KL01434
This set of rolling casters is a direct replacement to those included with the KOMOS V2 Kegerator. They can also be used in your own kegerator or keezer build project by simply attaching them directly to the unit. Mounting hardware not included.
Set of 4 caster wheels. 2 locking, 2 non-locking.
Keep the party flowin' with a KOMOS Jockey Box! The eye-catching stainless steel exterior isn't the only thing that distinguishes this beauty from ordinary jockey boxes. With forward-sealing Intertap faucets and all-stainless 50-foot draft coils, the KOMOS Jockey Box was designed from the ground up to keep your beer pouring with less foam for longer.
KOMOS Stainless Steel Jockey Box
Designed and manufactured for the craft beer industry!
100% stainless steel draft coils, shanks and faucets -- beer never touches anything but stainless
Custom designed shanks and coils ensure your beer cools properly and pours flawlessly
The only draft box that uses stainless steel Intertap forward sealing faucets
Push-In coil design applies force toward shank connection to protect against shank and coil separation
Sturdy stainless steel shank plates protect the cooler from being damaged from adjusting and tightening faucets and shanks
Stainless Steel construction on all serving components means this box will serve beer for years
Premium Stainless Steel Cooler provides superior ice retention
Pair this box with a KOMOS Connection Kit for everything you need to easily hook up your commercial or homebrew kegs and get pouring!
Features:
54 Quart Stainless Steel Cooler
2 x 50’ Stainless Steel Coils (5/16” OD)
2 x Stainless Steel Faucet Shanks
2 x Stainless Steel Pass Through Shanks
2 x Stainless Steel Flanges
2 x Stainless Steel Forward Sealing Faucets
2 x Black Tap Handles
4 x Stainless Steel Shank Plates (inner & outer)
Jockey Box Specs:
25" L x 18" W x 17.75" H
32.5 lbs
If you have a SodaStream CO2 cylinder then you can use this adapter to attach a CO2 regulator to it and avoid having to use those large 5 lb. CO2 tanks.
This adapter also has a side adjustment pin valve into the SodaStream bottle that enables the pin valve to be engaged once the cylinder, adaptor, and regulator have all been screwed together. This ensures that the gas supply from the bottle to the regulator can be engaged and disengaged while everything is screwed in place.
The adapter is incompatible with our Taprite brand regulators.
This 6 in. chrome shank comes with a back nut, plastic collar, and a welded 1/4" nipple. Requires a 1" hole saw for installation.
Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. This is a Chrome Plated Brass unit.
Dimensions:
6-1/4" - Total Length (Tip to Tip)
5-1/2" - Shank Length (Without Nut & Nipple)
4-1/8" - Thread Length
5-1/4" - Pass Through Length
For taking body connects off your kegs when cleaning and replacing o-rings on kegs with 11/16" body connects.
There are two sizes of body connects. 11/16" and 7/8". When ordering please order the size that corresponds to body connects that you already have.
A good brewer knows the importance of having the right tool for the job. They also know the importance of being able to disassemble their kegs for cleaning and rebuilding. This handy socket is a must-have if you own pin lock style kegs, so that you can easily remove gas and beverage body connects. 3/8" drive.
Great for customizing and expanding your modular gas line manifold!
This Add On Assembly for a gas manifold is easy to add to your existing manifold setup. Gives you the ability to expand your setup without having to buy a new manifold. Includes a shut off check/ball valve, one tee and a connecting nipple.
Perfect for summertime parties, the low-profile design makes this pump easy to use, store, and transport. At the beach, the park, or in the backyard, the Shorty will provide you with great beer keg after keg. For D style kegs.
Also known as a keg coupler, coupling, or adapter.
Faucet shanks allow you to mount a draft faucet just about anywhere. Typically installed in the door or wooden collar of of a converted fridge/freezer, the front of a cooler, or even in your house’s wall when constructing that ultimate home bar!
Once installed your beer line connects to the back of the shank and a faucet attaches to the front. Shanks are available in a range of sizes to accommodate mounting on materials of varying thicknesses.
The shank’s listed size refers to the total length of threaded pipe. Approximately 1 1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project.
Features a welded 3/16” barb and includes a glossy black plastic collar and locknut. Requires a 1” hole for installation.
Dimensions:
6-1/4" - Total Length (Tip to Tip)
5-1/2" - Shank Length (Without Nipple)
4-1/8" - Thread Length
5-1/4" - Pass Through Length
Expertly crafted stainless steel fruit press made by the original manufacturer of the bladder press Features a slotted screen which mirrors commercial press designs Higher juice yield (65-70%) compared to other press models Can be used with any domestic water supply that provides at least 36 psi of pressure Easy to clean after use—simply spray down with a hose and towel dry Made in Germany by Speidel Speidel was the original manufacturer of the bladder press. While similar to the Italian models in operation, Speidel offers a few quality upgrades. To obtain a better press Speidel uses a slotted screen, similar to what is offered on large commercial presses, instead of a screen with circular perforations. Speidel presses also offer superior hardware and a recessed valve assembly (to reduce accidental breakage). Insert bag and outer splash guard included. Compared to other presses, the Speidel hydro press has a higher juice yield (~65-70%) and works completely without electricity and with minimal effort. This press can be used with any domestic water supply the provides at least 2.5 bar (36 psi) of pressure. Pressing pressure and pressing time is simply regulated by the water flow. These units are extremely easy to care for and can be cleaned quickly by simply spraying it down with a hose after use. You will find the quality you'd expect from a product that is 100% German-made. Speidel has been shifting their bladder presses from painted to all stainless, and we're pretty excited about it. Although the orange painted versions have their own aesthetic appeal, nothing beats the performance and practicality of stainless steel. Stainless is much easier to clean and much more resistant to rust. The painted versions are likely to chip over time through normal wear and tear, creating small crevasses for bacteria to call home. No such worries when working this beautiful, brushed stainless press. Overall height is 35" and basket height is 18.5". A press cycle averages around 40 minutes. Please Note: Due to the size of the carton this wine press is packaged in, it ships as an oversized item, which is why the shipping weight below is listed as 75lb. In reality the press weighs closer to 35lb. Includes: Complete press assembly Inner mesh bag (to keep fruit from getting in the stainless basket and make cleanup easier) Plastic "spray-protection bag" to keep juice from squirting out Fittings to connect garden hose Instruction manual Presses ship in a corrugated box. Minor assembly (attaching legs) is required before use 1 Year Warranty on all parts! Download the PDF FAQ: Can the press be operated with air pressure? No. These are hydraulic presses that may only be operated with water. When operating with compressed air, there is a risk of explosion and a very high risk of injury if the membrane bursts due to excess pressure or damage. Is a minimum water pressure required? In order to ensure the function and the best possible yield, there should be a minimum water pressure of 2-2.5 bar on the press. What if the water supply delivers more than 3 bar? In principle, this is not a problem, as if the water pressure inside the press exceeds 3 bar, the pressure relief valve opens and there is no pressure-related damage. How many apples make how much juice? On average, 50kg (110 lbs) of apples produce around 30-35L (8-9 gal) of juice, depending on the variety and quality of the apples.
Professional-Grade Sealing: Robust design ensure consistent, secure corking of standard wine corks, ideal for home winemakers
Versatile Bottle Compatibility: Accommodates a wide range of bottle sizes, from 9.44" to 15.35" in height and up to 4.72" in diameter, providing flexibility for various wine bottles
Stable and Easy to Use: The floor-standing design provides exceptional stability, simplifying the corking process and ensuring a perfect seal every time
Effortlessly seal your wine bottles with the Grifo Wine Bottle Floor Corker. This robust corker floor corker with brass jaws provides professional-grade sealing for standard corks, accommodating a wide range of bottle sizes. Designed for stability and ease of use, it ensures a perfect, secure cork every time. Ideal for home winemakers and small-scale producers.
Specs:
Bottle Max. Diameter: 4.72" (120mm)
Bottle Min. Height: 9.44" (240mm)
Bottle Max. Height: 15.35" (390mm)
Suitable for Standard Corks
Max. Diameter: 1.18" (30mm)
Max. Height: 1.57" (40mm)
Brass Jaws
Dimensions: 25.6" x 17.7" x 35.4"
Weight: 20.9 lbs
Efficient and Easy Corking: Significantly faster and easier to use than handheld or bench-mounted corkers. Compact Storage: Removable legs and lever allow for easy disassembly and storage. Versatile Cork Compatibility: Works with both natural and synthetic corks, including Belgian corks. Acetal resin jaws ensure smooth operation. Adjustable Cork Height: Customize the cork depth with the adjustable nut on the plunger. This Italian-made floor corker offers efficient and easy corking. It features removable legs and a lever for convenient storage, making it significantly faster and easier to use than handheld or bench-mounted models. The unit ships boxed and requires minimal assembly. The adjustable nut on the plunger allows for customization of the cork height within the bottle. Updated in 2023, the corker now features acetal resin jaws (replacing previous brass jaws) and is compatible with both synthetic and natural corks, including Belgian corks. Also available in a welded model that offers added stability (W544). Min. Bottle Height: 9" (230mm) Max. Bottle Height: 15.3" (390mm) Max. Bottle Diameter: 5.5" (140mm) Max. Cork Diameter: 28mm Max. Cork Height: 40mm Assembled Dimensions: 28.9" L x 17.7" W x 35.8" H Made by Ferrari in Italy
Sansone Fusti tanks are crafted from high-quality stainless steel with welded handles for long-lasting performance and easy transport La Nuova Sansone has been crafting high-quality stainless steel containers in Italy for over 40 years, earning a reputation for exceptional design and quality NSF certified stainless steel spigot available for purchase separately The Sansone Europa model Fusti tank is made from 304 stainless steel with a mirror polish finish and welded handles. La Nuova Sansone has been making high-quality stainless steel containers in Italy for over 40 years, building a reputation for exceptional design and quality. If you intend to use the tank for water dispensing, we highly recommend the Europa-AQ model. This tank undergoes an additional pickling and polishing process that improves corrosion resistance. Specifications: Capacity - 75L (19.8 gal) Diameter - 460mm (18.11") Height - 550mm (21.65") Opening - 230mm (9.05") Empty Weight - 14.3 lbs Outlet - 1/2" BSP NSF Certified Made in Italy Stainless valve sold separately
Sansone Fusti tanks are crafted from high-quality stainless steel with welded handles for long-lasting performance and easy transport
La Nuova Sansone has been crafting high-quality stainless steel containers in Italy for over 40 years, earning a reputation for exceptional design and quality
NSF certified stainless steel spigot available for purchase separately
The Sansone Europa model Fusti tank is made from 304 stainless steel with a mirror polish finish and welded handles. La Nuova Sansone has been making high-quality stainless steel containers in Italy for over 40 years, building a reputation for exceptional design and quality.
If you intend to use the tank for water dispensing, we highly recommend the Europa-AQ model. This tank undergoes an additional pickling and polishing process that improves corrosion resistance.
Specifications:
Capacity - 50L (13.2 gal)
Diameter - 420mm (16.53")
Height - 440mm (17.32")
Opening - 230mm (9.05")
Empty Weight - 11.9 lbs
Outlet - 1/2" BSP
NSF Certified
Made in Italy
Stainless valve sold separately
Made from high-quality Slavonian oak sustainably sourced from Hungarian forests
Superior in long term storage due to the tight grain and slow release of phenolic compounds
Equivalent or superior quality compared to French Oak barrels at a much more affordable cost
Zinc-plated steel barrel hoops for corrosion resistance
Coopered by the world-renowned Balazs Nagy
Balazs barrels is a long-trusted brand of Hungarian oak barrels coopered by the famous Balazs Nagy. These barrels are equal or better in quality to French Oak barrels but available at a fraction of the cost of their more famous counterparts. Renowned for respecting fruit, Hungarian barrels offer winemakers a great option to impact the mouthfeel, structure and flavor of wine without stepping on the terroir of your grapes.
Due to the tight grain and slow release of phenolic compounds, you can feel secure storing your wine in Hungarian barrels longer than you can with other barrels. The slow process of micro oxygenation rounds the wine while various compounds in the wood such hemicellulose, lipids, and lignins are slowly integrated.
As most barrel makers know, the best source of wood for wine barrels is the oak grown in the territory of old-time Hungary, known as Slavonian oak. This rare, high-quality oak can be found in the Zemplén Mountains and in the Tokaj oak woods. The specific type of oak in those territories, and what is used in Balazs barrels, is the Quercus Petrea. This oak is characterised by a dense, hard structure combined with extra flavor. Forestry workers look after these forests with considerable expertise, and the forest density ratio in Hungary is 20–24%, with selective logging taking place between November and April. Once the wood is sourced, it is air dried and aged for 24-28 months before cooperage.
Balázs Barrels is establishing a direct cooperation with the forestry workers, ensuring the continuous supply of the best quality oak, allowing them to source and work with the most excellent oak for wine barrel manufacturing from the foremost Hungarian forests.
56 L (14.8 gal)
Height - 24"
Head Diameter - 14.37"
Abdomen Diameter - 18.3"
Stave Thickness - 7/8 - 1"
Bung Hole - 41 mm
Empty Weight - 51 lbs
Medium Toast
Barrel hoops made from zinc-plated steel for corrosion resistance
Made from high-quality Slavonian oak sustainably sourced from Hungarian forests
Superior in long term storage due to the tight grain and slow release of phenolic compounds
Equivalent or superior quality compared to French Oak barrels at a much more affordable cost
Zinc-plated steel barrel hoops for corrosion resistance
Coopered by the world-renowned Balazs Nagy
Balazs barrels is a long-trusted brand of Hungarian oak barrels coopered by the famous Balazs Nagy. These barrels are equal or better in quality to French Oak barrels but available at a fraction of the cost of their more famous counterparts. Renowned for respecting fruit, Hungarian barrels offer winemakers a great option to impact the mouthfeel, structure and flavor of wine without stepping on the terroir of your grapes.
Due to the tight grain and slow release of phenolic compounds, you can feel secure storing your wine in Hungarian barrels longer than you can with other barrels. The slow process of micro oxygenation rounds the wine while various compounds in the wood such hemicellulose, lipids, and lignins are slowly integrated.
As most barrel makers know, the best source of wood for wine barrels is the oak grown in the territory of old-time Hungary, known as Slavonian oak. This rare, high-quality oak can be found in the Zemplén Mountains and in the Tokaj oak woods. The specific type of oak in those territories, and what is used in Balazs barrels, is the Quercus Petrea. This oak is characterised by a dense, hard structure combined with extra flavor. Forestry workers look after these forests with considerable expertise, and the forest density ratio in Hungary is 20–24%, with selective logging taking place between November and April. Once the wood is sourced, it is air dried and aged for 24-28 months before cooperage.
Balázs Barrels is establishing a direct cooperation with the forestry workers, ensuring the continuous supply of the best quality oak, allowing them to source and work with the most excellent oak for wine barrel manufacturing from the foremost Hungarian forests.
20 L (5.28 gal)
Height - 16.92"
Head Diameter - 10.23"
Abdomen Diameter - 12.79"
Stave Thickness - 0.66 - 0.86"
Bung Hole - 26 mm
Empty Weight - 17.6 lbs
Mild Toast
Barrel hoops made from zinc-plated steel for corrosion resistance
Rack included
Self-priming flexible impeller pump for moving wine or juice
Stainless steel pump head with 1.5" tri-clamp connections
On/off switch for easy operation
19.8 gallons per minute flow rate
Stainless bypass for reducing flow rate
Made in Italy by EnoItalia
The Euro 30 is a great versatile winery pump for all around cellar needs. The sanitary connections are 1.5" TC to allow for easy hook up of hoses, filters, fillers, you name it. With the included SS Bypass, you can reduce flow rates up to 25%. SS head means easy maintenance, and a power switch on the body keeps all necessary controls conveniently accessible.
Features:
Flow rate is 19.8 gpm
Max Pressure: 40 PSI (2.8 BAR)
1.5" Tri-Clover inlet and outlet
220 v single phase Input Voltage Required (6.5 amp draw)
1.5 HP motor
Self-priming
Recommended temperature range: 40 - 150°F (5 - 65°C)
SS Bypass for reducing flow
SS head w/ flexible impeller
220v bare cord - You will need to wire on the appropriate 220v plug
Please Note: This item may come with a bare cord or with a European style plug. You will need a professional electrician to wire the pump with the appropriate plug.
Replacement air tubes for variable capacity tanks. 65 cm tube fits Marchisio 300-400 Liter tanks, and the wide format 200L tank.
Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
Replacement air tubes for variable capacity tanks. 50 cm tube fits Marchisio 100 - 200 Liter tanks.
Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
Easy-to-operate, highly-efficient fruit crusher
Made from high-quality rust-free materials throughout
Optimum milling of apples and pears to provide the highest possible yield when juicing
2,200 lbs per hour processing capacity
Stainless steel, re-grindable, reversible, hardened blades
Made in Germany by Speidel
We have been offering the Speidel Apple & Pear Mill for nearly two decades and it continues to be our most popular crusher year after year. This fruit grinder impresses with its quality, functionality and safety. From the chute to the motor, this unit is made entirely in Germany. The body of the crusher is made from food-safe, high-quality PE plastic that provides extreme durability. The large funnel at the top makes feeding fruit quick and effortless while the integrated roller allows the unit to be moved and transported with ease. Cleanup is as simple as spraying down the funnel and blade assembly with water. The only maintenance the mill needs is occasionally sharpening the grinding blades.
Do you want optimum milling for pressing and fermenting your apples and pears for Cider?
If so, the Speidel Apple and Pear Mill is just right for you. It shreds apples and pears in an optimum manner; not too coarse, not too fine – exactly the right size of cut to guarantee you the highest possible yield when juicing (without fruit pulp in the juice) as well as speedy fermentation!
Simple to Operate
The Speidel Apple and Pear Mill is easy to use. Simply plug it in, switch it on and start feeding your apples or pears! It has a large feed-hopper to make it easy to fill in the fruit directly from the box. It can handle up to 2,200lb of fruit per hour. Cleaning is simple: just remove the feed hopper and spray off the appliance and the hopper with water.
Maintenance-Free
The Speidel Apple and Pear Mill is almost maintenance-free. Only the cutter blades should be sharpened from time to time.
Rust-Free for its Service Life
Hopper, motor block, cutter blades, apron, feet etc. are all made of high-quality rust-free materials requiring neither care nor any special treatment. No rust even after years of use.
Safety is a Top Priority
The Speidel Apple and Pear Mill complies with all applicable European Safety Standards (CE Sign). Additionally, the motor is equipped with a thermal overload switch. The feed hopper has both reach-in and switch-on protection. Polyethylene shield to protect the cutters and the motor against any unauthorized intervention and against splashing water.
Mills Ready for Pressing & Fermentation
No fruit pulp in the pressed fruit juice
Highest possible juice yield when pressing
Optimal conditions for fast, healthy fermentation
Specifications:
Feed hopper
Made of heavy-duty orange PE plastic (recyclable)
Lower part
Made of heavy-duty black PE plastic (recyclable)
Motor
220V 1-Phase, 50Hz, output 2.2 kW (3HP), speed 2,800 r/min
On / Off
Switch with lock-out feature
Connection
220V, 50Hz
Cutting Unit
Made of stainless steel, re-grindable, reversible, hardened blades
Other Info
Up to 2,200lb/hr; Rust-Free; All Parts Food-Safe
Height (in)
Length (in)
Width (in)
Discharge Height (in)
Weight (lb)
49.2
13.8
30.1
15
55lb
Supplied with a 7' power cord. You will need to wire on the correct 220v plug.
CE Certified
FAQ:
How much can be processed with the grinder in what amount of time?
The Speidel Apple & Pear Mill can process roughly 2,200 lbs of fruit per hour.
Why did the grinder suddenly switch off during operation?
Too much fruit has been loaded in, the grinder may be overheating and needs to cool down. Feed fruit more slowly.
The funnel is not seated correctly. The switch-on safety device is no longer actuated. Check the fit of the funnel and the setting of the tension locks.
Overload on the power line. Check the fuse.
What maintenance work must be carried out?
The unit is almost maintenance-free. Only the blades should be sharpened from time to time.
Please Note: This item may come with a bare cord or with a European style plug. You will need a professional electrician to wire the unit with the appropriate plug.
Do you have issues with your heat shrinker? Do you keep burning the top or sides of the heat shrinks with inexpensive shrinkers? Do you have a terrible "bottleneck" in your packaging line where heat shrinks are applied? If so, our Vertical Heat Shrinker is the solution you've been looking for.
Features
Faster throughput keeps your bottling line moving
Temperature Control and precise bottle placement ensure that the heat shrink is not marred or damaged during application.
Stainless Steel Construction
Ceramic stone pushes down top of shrinks and can be replaced with your own custom heat stamp
110V 60Hz Power!
Does not come with plug
Replacement ball valve for Gen 4 BrewZillas. The valve nozzle has a 0.51" (13mm) radial seal barb and nut.
Does not include Rear Nut & Barb. See AG556.
Precision Cone Measurement: High-accuracy radar technology tracks volume all the way down to the tank cone, eliminating guesswork during filling or packaging.
Rapid Calibration: Simplified setup process allows you to configure volume and dimensions quickly using a basic water-fill reference.
Direct-Mount Reliability: Optimized for vertical flange installation to ensure a clear signal path and maximum measurement stability.
Radar based level sensor for FCS
The days of guessing tank the volume during filling or kegging/bottling is over. Radar based level sensor designed to measure the tank volume down to the cone in a fermentation tank.
The sensor is configured by setting the volume, tank diameter and distance to the cone. It's easily done by filling water in the tank to the top of the cone.
The sensor must be installed on a vertical flange on the top of the tank, ideally on a single port welded on the curved top surface. Avoid using tees/pipes between the sensor and the tank.
Specifications:
Measuring distance: 0-3m / 0-9.8 ft (Preliminary)
Flange: TC 1.5". Ø19mm minimum
Connector: LP12 5-pin (CAN bus + 24V)
Note: During fermentation the krausen/foam will give incorrect values. Cooling spirals etc inside the tank may give incorrect readings.
Commercial Quality Base: Crafted from real fruit juice using the same formulations as commercial wineries.
Easy 5-Gallon Batches: One gallon of base yields five gallons of high-quality 10% ABV fruit wine.
No Adjustments Needed: Extremely convenient; no pH or acid adjustments required.
Simple & Convenient: Just add water and yeast to ferment.
All natural and made with real fruit juice, Vintner’s Best® fruit wine bases are crafted from the same formulations used by commercial wineries. One gallon of fruit wine base makes five gallons of high-quality fruit wine at 10% ABV. Extremely easy and convenient to make, requiring no pH adjustments and no acid adjustments. Simply dilute one gallon of Vintner's Best® Fruit Wine Base with four gallons of water, pitch yeast and stir!
The wine base is a blend of juice concentrates, HFCS, citric and malic acids and natural flavor designed to make a fermentable base for a fruit wine blend at 18.9°B. The product is blended, pasteurized. Diammonium phosphate is added as a yeast nutrient.
Benefits of Vintner’s Best® Fruit Bases:
All-natural fruit juice
6-8 weeks to finished product
No PH or acid adjustments
Shelf stable for up to two years
No refrigeration necessary
Scalable to any batch size
Pre-blended - no straining out fruit pieces
Easy and convenient
More inclusive – add only yeast and water
Re-sealable jug with tamper resistant seal
Over 30 flavors to choose from
Concentrate Specs:
°Brix: 73.1 min
Acidity: 2.2–2.8 (as citric acid)
Ingredients: Natural Blood Orange Flavors, Diammonium Phosphate, Water, Vegetable Extract & Beta Carotene (Colors)
Commercial Quality Base: Crafted from real fruit juice using the same formulations as commercial wineries.
Easy 5-Gallon Batches: One gallon of base yields five gallons of high-quality 10% ABV fruit wine.
No Adjustments Needed: Extremely convenient; no pH or acid adjustments required.
Simple & Convenient: Just add water and yeast to ferment.
All natural and made with real fruit juice, Vintner’s Best® fruit wine bases are crafted from the same formulations used by commercial wineries. One gallon of fruit wine base makes five gallons of high-quality fruit wine at 10% ABV. Extremely easy and convenient to make, requiring no pH adjustments and no acid adjustments. Simply dilute one gallon of Vintner's Best® Fruit Wine Base with four gallons of water, pitch yeast and stir!
The wine base is a blend of juice concentrates, HFCS, citric and malic acids and natural flavor designed to make a fermentable base for a fruit wine blend at 18.9°B. The product is blended, pasteurized. Diammonium phosphate is added as a yeast nutrient.
Benefits of Vintner’s Best® Fruit Bases:
All-natural fruit juice
6-8 weeks to finished product
No PH or acid adjustments
Shelf stable for up to two years
No refrigeration necessary
Scalable to any batch size
Pre-blended - no straining out fruit pieces
Easy and convenient
More inclusive – add only yeast and water
Re-sealable jug with tamper resistant seal
Over 30 flavors to choose from
Concentrate Specs:
°Brix: 73.1 min
Acidity: 2.2–2.6 (as citric acid)
Ingredients: High Fructose Corn Syrup, Apple, Pear & Peach Juice Concentrates, Water, Citric Acid, Malic Acid, Natural Flavors
California Moscato woth notes of grape, green apple and pear
Light-medium bodied with a medium-sweet finish, 8.5% ABV
Yields 6 gallons (2 cases) of finished wine in approximately 4 weeks
Looking for a delicious and versatile wine for any occasion? Winexpert Classic™ is the perfect wine to have on hand for life’s big events and everyday moments. Experience the satisfaction of crafting high quality and versatile wines from the world’s best known countries – from the ripe fullness of a lively Shiraz to a crisp Italian Pinot Grigio, delicious wine is yours for the making.
From this box to your bottle in just 4 weeks.
Moscato, California
Grape, green apple and pear.
Sweetness: Medium-Sweet
Oak: None
Body: Light-Medium
ABV: 8.5%
