This Duotight check valve is a great idea for protecting your regulator. It has a low opening pressure of 1 psi. This check valve is suitable for clean liquids such as water or for gas. Since it cannot be disassembled for cleaning, we do not recommend it for beverage applications. The internal components are made from stainless steel. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design:
The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary!
We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Compatible with EVABarrier 9.5 mm OD tubing (D1719). This Duotight check valve is a great idea for protecting your regulator. It has a low opening pressure of 1 psi, and since it cannot be opened or taken apart, it is recommended for gas applications only. The internal components are made from stainless steel. Features:
Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & water applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07498
Mill your own grains on brew day for increased freshness and higher efficiency!
Adjustable gap setting allows you to fine tune your preferred crush level and adapt to the kernel size of different malts
Gap settings are etched into the mill body for easy reference
304 stainless steel knurled rollers efficiently pull grain through while leaving hull intact to form an excellent filter bed for sparging
3 roller mills are more effective at cracking the husk of the grain and offer better crushing performance in a single pass
2 driven rollers further improve performance as both top rollers grab grain and pull it into the gap
Included crank handle can be detached to power the driven roller with an electric drill or motor
Comes with metal base featuring guides on both sides to help secure the mill when placed over a bucket
Milling trouble never hangs around when it hears this Mighty sound! The Mighty Mill will be a superhero in your brewery while still being one of the most affordable full grain mill setups. Featuring 304 stainless steel knurled rollers, 7-pound aluminum hopper, with base board and mounting hardware included. Easily operate via the crank handle, or remove the crank and rotate the driven roller with an electric drill. The adjustable rollers can be set in a gap range from 0.025" to 0.1", allowing you to fine tune your crush based on the grain and personal preference.
7 lb aluminum hopper
Smooth grip crank handle
Adaptable for use with power drill
304 knurled steel rollers
Adjustable gap setting from 0.025" to 0.1"
Metal base board sits comfortably on 5- or 6.5-gallon plastic buckets
Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.
IP55 Water Resistant Rating: Ready to handle the messiest brew days and easy cleanup.
Magnetic Drive: Ensures smooth, efficient, and sanitary wort transfer.
360° Pro DIN Fitting: Allows for secure, sanitary, and easy connection with customizable outlet placement.
1.5" TC Center Inlet Head: Engineered for advanced brewing setups including mash recirculation and transfer.
Inspired by countless brew days in our garages and basements, as well as our experience in professional breweries, Ss Brew Pump is our take on a classic piece of brewing gear that is key to so many homebrew setups around the world.
Featuring an IP55 Water Resistance Rating, an easy-to-use DIN Head, Magnetic Drive, and 1.5” TC Center Inlet Head, Ss Brew Pump is engineered to tackle even the messiest of brew days!
IP55 | Water Resistant
Just like the high-quality pumps found throughout craft breweries, the Ss Brew Pump is IP55 certified and ready to handle the messiest of brew days.
From the Ground Up
Designing our own pump is something we have been eyeing for a while. Pumps are critical to any form of advanced brewing. From mash recirculation to transferring wort to cleanup, a quality pump is a key part of every brewday.
Years of working in professional craft brewing environments, where water-resistant pumps are the norm, made the foundation of our brew pump an easy decision. It had to be IP55 rated to handle the unavoidable messes that happen and the cleanups that follow them.
Once we unlocked the design for waterproofing, we turned to a laundry list of specs and features we wanted. That led to the creation of the Ss Brew Pump; one of our favorite products and now a staple in all of our team’s homebrew setups.
Magnetic Drive
It’s no secret that magnetic drive pumps are perfect for brewing applications. Instead of using a direct drive system where sealing off the wort from the drive shaft and motor is a major concern, Ss Brew Pump uses a high-end magnetic drive that allows for smooth, efficient, and sanitary operation.
360° Pro DIN Fitting
Commonly found on Pro Brewing Tanks, DIN fittings allow for a secure and sanitary connection that is also super easy to use. Unlike a TC connection, the DIN Head on Ss Brew Pump allows for a secure connection that applies even pressure on every bit of the silicone seal and is easier to remove and reinstall without having to fumble with a large clamp.
The DIN Head can also be rotated and secured in a full 360 degrees so that you can place the Pump’s outlet exactly where you need it for your brewing setup.
Note: Ss Brew Pump is currently not compatible with Legacy versions of Brew Cube | Pump Mount Plate Kit, Brew Cube | Valve Tree Manifold, and Portable Valve Tree. Ss Brew Pump uses a larger mounting plate and the bolt holes to secure it are in a different pattern than the Chugger pumps these products were originally designed for. We are working to update these products and plan to have them available soon.
What's Included:
Ss Brew Pump
50-120 DIN Pin Wrench
Specifications:
11 gallons per minute flow rate
18 ft Max Head
IP55 Water Resistant
Sanitary DIN Fitting Stainless Head with 1.5" TC Center Inlet
120 VAC 60hz 0.7 A
Assembled dimensions: 5.5” x 4.5” x 9.75”
Package dimensions: 7.25” x 7.25” x 12” - 11.75 lbs
Oak Chips offer a quick and affordable way to impart complex, barrel-aged flavors
These screened oak chips have been sifted to remove smaller particles, resulting in more uniform pieces
Medium Plus toast imparts flavors of vanilla, mocha, toffee, spice, and butterscotch
Ideal for short-term aging
Crafted from premium American oak, these chips offer a swift and economical path to complex, barrel-aged flavors. With a variety of toast levels, you can achieve your desired depth of character, from delicate vanilla to robust toasted notes. Enjoy significant time and cost savings without compromising on richness.
These screened oak chips have been sifted to remove smaller particles, resulting in more uniform pieces that provide a consistent and controlled release of flavors during aging.
Medium Plus toast imparts flavors of vanilla, mocha, toffee, spice, and butterscotch.
Oak Chips Inc. (OCI) specializes in providing premium oak alternatives, such as chips, cubes, and staves, for enhancing the flavor and aging process of wine, spirits, and beer. They source their oak from sustainable forests and offer various toast levels to help beverage makers achieve desired flavor profiles.
Our Phantasm Powder hazy recipes are bursting with a tropical bouquet complimented by a choice selection of New Zealand and Pacific Northwest hops
Includes Mosaic®, Amarillo®, Cascade, Talus®, Vic Secret, Strata, Idaho 7®, Riwaka™, and Sabro™ hops
Estimated ABV: 8.2%
Estimated IBUs: 42
Makes 5 gallons of finished beer
If you're hearing ghostly tales whispered around your local homebrew shop, there's no need to pile your brew crew into the hippy van—this one is no mystery. Phantasm Powder has been causing quite a stir on the craft beer scene, and the buzz is well deserved. Adding this powder to your wort and fermenting it with a thiolized yeast strain is one of the easiest ways to boost tropical flavor and aroma in your finished beer. Derived from Marlborough Sauvignon Blanc Grapes, this powder will add a concentrated dose of thiol precursors. During fermentation, yeast will go to work on these aroma compounds and "free the thiol", boosting the tropical bouquet of your beer to supernatural levels. We're stoked to get this cutting-edge ingredient into the hands of homebrewers so we designed a series of Phantasm recipe kits that will set you up to take full advantage of brewing with Phantasm Powder.
Our Phantasm Hazy Double IPA includes 10 ounces of aroma hop additions from whirlpool to biotransformation to post fermentation, leaning on some choice New Zealand and American varietals and turns it up a notch with two additions of Cryo Hops® for an extra concentrated kick of hoppy goodness. Since this kit series is all about the thiols, we start with whole cone Mosaic in the mash to further increase the thiol precursors. Add the Phantasm Powder at flameout along with your whirlpool / hop stand additions. For maximum effect, we highly recommend choosing a thiolized yeast strain for fermentation which are specifically designed to boost thiol biotransformation.
Makes 5 gallons
Estimated Original Gravity: 1.075-80
SRM (Color Range): 4-5
IBUs: 42
Estimated Original Gravity: 8.2%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Our Phantasm Powder hazy recipes are bursting with a tropical bouquet complimented by a choice selection of New Zealand and Pacific Northwest hops
Includes Cascade, Citra®, Motueka, Mosaic®, and Nelson hops
Estimated ABV: 5.8%
Estimated IBUs: 22
Makes 5 gallons of finished beer
If you're hearing ghostly tales whispered around your local homebrew shop, there's no need to pile your brew crew into the hippy van—this one is no mystery. Phantasm Powder has been causing quite a stir on the craft beer scene, and the buzz is well deserved. Adding this powder to your wort and fermenting it with a thiolized yeast strain is one of the easiest ways to boost tropical flavor and aroma in your finished beer. Derived from Marlborough Sauvignon Blanc Grapes, this powder will add a concentrated dose of thiol precursors. During fermentation, yeast will go to work on these aroma compounds and "free the thiol", boosting the tropical bouquet of your beer to supernatural levels. We're stoked to get this cutting-edge ingredient into the hands of homebrewers so we designed a series of Phantasm recipe kits that will set you up to take full advantage of brewing with Phantasm Powder.
Our Phantasm Hazy Pale Ale features a 50/50 split of New Zealand and Pacific Northwest aroma hop additions that lean into a tropical, citrusy character that will pair perfectly with Phantasm Powder. Since this kit series is all about the thiols, we start with whole cone Cascade in the mash to further increase the thiol precursors. Add the Phantasm Powder at flameout along with your whirlpool / hop stand additions. For maximum effect, we highly recommend choosing a thiolized yeast strain for fermentation which are specifically designed to boost thiol biotransformation.
Makes 5 gallons
Estimated Original Gravity: 1.054-59
SRM (Color Range): 3-4
IBUs: 22
Estimated Original Gravity: 5.8%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
The Chilling Coil kit can be used to update the 7 gal Brew Buckets for temperature control. Then you can add an FTSs Touch kit for use with the Ss Glycol Chiller.
Features:
Thick 5 mm zippered neoprene jacket
Immersion chiller coil mounted to 6" TC cap
Cap | 3” TC with ½” Blow-Off and 300mm Thermowell
3/8" hose barbs on the chiller coil
17mm Plug for Brew Bucket Brewmaster Edition
Included hose clamps (for chiller coil), TC Clamps, TC Gaskets
Kit not compatible with Brite Tanks, Chronical Series, or Unitanks.
Specs:
Assembled Dimensions: 27.5"H x 13"W x 13"D (on Bucket)
Assembled Weight: 22lbs / 10kgs (on Bucket)
Leak-free quick connectors are well suited for glycol to cool fermenters.
Fits perfectly in combination with 8.5mm x 14mm EVA tubes both insulated and non-insulated.
This flat lid with pre-drilled holes allows you to easily add a Temp Twister Cooling Coil to your 35L Bucket Buddy fermenter. It also has holes for your stopper & airlock (included with the Bucket Buddy) as well as a Thermowell so you can control the circulation of cooling solution with a Temperature Controller. The lid is also compatible with 35L BrewZillas and DigiBoils. If you're fermenting in the Bucket Buddy with built-in heating element, we recommend plugging the unit into the heating outlet of your temperature controller and leaving the power switch turned on. This will allow the temp controller to provide power to the unit only when heating is needed and it will cut the power as soon as you're back to your set temperature. Using the Bucket Buddy's controller to maintain the heating set temp and using a separate controller to maintain the cooling may result in heating and cooling cycling at the same time. NOTE: The pre-drilled holes are meant for specific sizes of Duotight bulkheads and the stopper included with the Bucket Buddy fermenter. All holes need to be occupied in order to protect your fermentation from outside contaminants. Depending on the placement of the Temp Twister, you might need to shorten the inlet/outlet tubes on the outside of the fermenter using a Pipe Cutter. Lid only. Other accessories must be purchased separately. You Will Also Need: Temp Twister Cooling Coil FermZilla Thermowell Temperature Controller KegLand Part Number: KL28103
This 40 Liter Hydropress provides a simple, highly effective method of extracting juice from apples, pears, berries or grapes for juice, wine or cider making. It can also be used as a cheese press or for honeycomb. Primarily targeted at the Apple Mead and Cider makers, as this press is hard to beat on a budget. Make the best possible sparkling cider with the Electric Apple Grinder and 40L Hydropress.
Bladder presses work by expanding a rubber bladder using household water pressure via a garden hose. Since the bladder is situated in the center of the press, the grapes/fruit are squeezed from the inside out in a uniform fashion even if the basket is only partially filled. This is a much more effective way of pressing fruit pulp as it allows a wider surface area for the juice to be extracted. Compared to traditional hydraulic top down presses, large amounts of streaming and blockages would be trapped within the bulk matter. The hydropress is also used on a mammoth scale in wineries as it is by far the most effective means of extraction without electrical power.
When pressing normal mains water pressure of 2.5 to 3 bar it will generate around 20 tonnes of pressing power. The pressure applied and the duration of pressing can be regulated simply by opening or closing the water tap.
High-Quality Material
This water-powered press is made of food-grade stainless steel, resistant to rust and corrosion, easy to wash, and wipe clean after use. With three stable steel legs. Best suited to be used outdoors where you can hose away any accidental spills of fruit and juice.
Electricity-Free:
Bladder presses use water to produce pressure for natural juice making, winemaking and cheese making. It’s energy-saving and space-saving. If the pressure gets too high, it will be released automatically, making this unit safe and easy to operate.
Important:
Keep the gray bladder out of direct sunlight for storage. A black garbage bag makes an excellent cover that will protect your gear for years to come.
Features:
40L capacity
Rubber membrane is made of high-quality natural rubber
Food grade stainless steel perforated basket
Press bag included
Make grapes, apple, pears, cherries, tomatoes, berries, or other soft fruit into juice, cider or wine
Made of food grade 304 Stainless Steel
Easy to dismantle and clean
1/2" BSP Female water inlet
KegLand Part Number: KL23313
Adapt any 3" tri-clamp port or valve to work with an existing 2" tri-clamp fitting. The concentric design limits flow resistance as you step down from 3" T.C. to 2" T.C.
3" x 2" tri-clamp
5" long
Made from 304 stainless steel
ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
Please note: 2" x 1.5" fitting pictured. Updated images coming soon.
The VineCo Niagara Mist lineup offers a crisp, easy-drinking alternative to more traditional winemaking kits. These fruit-forward wine kits are all about capturing the refreshing essence of juicy ripe fruit. Light and crisp and offered in a full assortment of reds, whites, and rosés. Niagara Mist wines are easily enjoyed on their own, but also work well as the base for punches or wine spritzers.
An irresistible flavor tag team of fresh mango and sweet, sun ripened strawberries. Niagara Mist Mango Strawberry is a light-bodied, sweet white wine with an alcohol level of 6% by volume.
Mango Strawberry
Mango, sweet strawberries
Sweetness: Sweet
Oak: None
Body: Light
ABV: 6%
Kit Volume: 6 L
Approximate Yield: 23 L
Ready to bottle in 4 weeks
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. This item will automatically ship when the manufacturer has more inventory in late January
This faucet adapter for the BrewRO System will allow you to filter water from a sink faucet instead of the garden hose spigot. Water collection can take hours, which is why there's a convenient diverter valve that allows you to access the water from your faucet without having to disconnect the entire adapter. Uses a 1/4" compression fitting and comes with a male to male adapter.
Give your Chronical insulation to help with maintaining fermentation temp and assist with cold crashing. Specifically sized for the 10-clamp version of the 1/2 bbl unit.
R-HST was selected for its exceptional oenological properties in Riesling from trials conducted 1991 to 1996 in the Heiligenstein region of Austria. R-HST has a short lag phase and generation time, even at cold temperatures. These features allow it to dominate and persist over spoilage yeast such as Kloeckera apiculata, where other Saccharomyces cerevisiae might have difficulty. A relatively neutral strain, R-HST retains fresh varietal character while contributing body and mouthfeel. R-HST produces crisp, premium white wines intended for aging. R-HST is best used when the most transparency between a fruit and a finished wine is sought. This can be useful for showcasing quality fruit and terroir differences, as well making sure original fruit characters are retained in a final blend. Best results from 50 to 86 degrees F, with an alcohol tolerance to 15%. Download the PDF Download the PDF
This is just the spinning spray head. We use this as part of our complete barrel washer, WE492. Some clever customers have asked for just this head so that they can fabricate their own washer. Features female 3/4" NPT threads for attachment.
Height 3". Diameter 1 3/8"
Measure and dilute liquids with accuracy and ease! These class-A, lab quality, plastic graduates are designed to deliver accurate measurements while remaining resistant to breakage and a wide range of chemicals. Suitable for all general lab work.
Using an electric Recirculation Infusion Mash System heater to heat your mash is one of the safest and most energy-efficient ways to get your brew to the perfect temperature, and the Blichmann RIMS-Rocket is one of the most popular models on the market today. This innovative heater is designed especially for use with the popular Blichmann HopRocket™ canister, and to install it all you have to do is secure it inside of the canister, plug it in, and monitor the temperature. The RIMS-Rocket operates with 2000 W, 120V and ultra low watt density in order to perform optimally in your RIMS system. It features a "plug and play" 12-foot long factory wired cable with a molded twist-lock L6-30P plug on one end and a removable plug on the other end, making it easy to clean because there are no dangling cords attached to the side of your heater. Best of all, the ultra low watt density ensures that you’ll never scorch your mash during the heating process! Features: The RIMS-Rockettm heating element is 2000 W, 120V, ultra low watt density and is engineered to perform optimally in your RIMS system Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your heater and the terminal pins are spray-down capable! The RIMS-Rockettm heater assembly clamps right into our HopRockettm canister for added versatility and lower cost. The RIMS-Rockettm includes a "plug and play" 12ft factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end. Less than Ultra low watt density means NO chance of scorching, and dry-fire capable (although we certainly don't recommend this!) Please note: mounting bracket sold separately.
This Stainless Steel BSPP barb will connect any tubing with a 3/4" ID line to any fitting with a 3/4" Female BSPP connection.
The barb is slightly oversized at 20mm (0.78") compared to 3/4" (0.75") which will give you a tighter connection with your tubing.
BSP vs. BSPP
BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT.
KegLand Part Number: KL06668
A metal shield that protects the thermometer, but still allows for easy reading. Loop on end of shield allows for convenient hanging. Fits both of our 12" glass thermometer (MT360A).
A classic yeast strain for Kölsch & Altbier beer styles. A neutral ester profile allows the beer to better express noble hops & malt character. Finishes dry with low levels of diacetyl.
Every batch is PCR tested to ensure quality.
Dosage:
Use at a rate of 50-95 grams per barrel, depending on wort temperature and gravity.
Direct Pitch or Rehydrate:
KÖLSCH yeast is designed to be sprinkled directly onto the surface of your wort with no oxygenation required in the initial fermentation. Our aerobic growth process makes this possible by creating dry yeast with high viability and high sterol levels. KÖLSCH yeast is pre-loaded with essential nutrients to ensure a successful, complete fermentation. While not required, some brewers prefer to rehydrate yeast. To hydrate yeast, first, sanitize the yeast brick and scissors. Use 10 grams of sterilized tap water between 85-95°F (29-35°C) mixed with 0.25 grams of FermStart per gram of yeast. Sprinkle yeast on the water. Allow the slurry to stand undisturbed for 20 minutes, then swirl. Use small amounts of wort to adjust to within 10°F (6°C) of wort temperature before pitching. Ferment between 60-73°F (16-23°C).
Optimum Fermentation Temp: 60-73°F
Flocculation: Medium
Alcohol Tolerance: 10-11% ABV
Attenuation: 75-80%
Similar Strains: WLP029, WY2565
Gluten-free
1" stainless steel hex nut. Used to attach a tailpiece barb to either a faucet shank or keg coupler. You will also need a tailpiece gasket to form a seal. See below for EPDM, Silicone, and Vinyl options.
Female Beer Thread (5/8" BSP)
5/8" top port opening
Comes in a convenient zip lock bag.
This is our preferred tubing for use in Barrel Topping Systems. Because of its high elasticity this tubing is easy to attach to/detach from barbed fittings without having to cut the tubing to remove it or use hose clamps to install it (in low pressure applications). This feature allows the user to disassemble the tubing set used to deliver the top-up wine for both sanitation as well as cleaning after use. Cleans up easily and does not get stiff at low temperatures. OD is approximately 3/8"
Specs:
Working Pressure - 20 psi
Burst Pressure - 60 psi
Platinum Cured
Great Replacement for a broken gauge.
Replacing a broken gauge on your pressure regulator is a snap with this Left Hand Thread 3000 psi Replacement Pressure Gauge for CO2 or Nitrogen regulator. Installation is simple, and it prevents you from needing to buy a whole new regulator.
Used to determine level of remaining gas in the tank.
1/4” MPT Left-hand thread.
Heavy-duty HDPE plastic fermentation and stoarge tank
Made from food-safe materials with extra thick walls to preserve the aroma of your beverage
Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid
Wide top port opening for easy cleaning
Airlock & stopper included
Made in Germany by Speidel
The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable.
Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you!
These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price.
Key Features:
Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass.
Small footprint makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making.
Built-in handles make these tanks easy to move, even when full.
Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush!
All ports seal with gaskets and the vessel can be fully sealed for long-term storage.
Includes a spigot, airlock and stopper.
Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks
Suggested Applications:
12L: Perfect for storing small lots and experimental batches or taking some of your beer or wine along with you to your next party.
20L: Ideal for secondary fermentation and storage of 5 gallon batches.
30L: The vessel for fermenting wine kits and 5 gallon batches of beer with plenty of headspace and no need for a blowoff tube.
60L: Perfect for fermenting larger batches of wine or 10 gallon batches of beer in a single container! Only 4" larger in diameter than a 6.5 gallon carboy!
120L: Ferment & Store large batches of anything - your creativity is the only limit!
Approximate Dimensions: 10in Diameter x 14in Height (w/out airlock in place). Note - The maximum temperature that these plastic fermenters can handle is 140F.
FAQ:
Can filled containers be carried by the handles?
Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs).
Is there an upper limit on the alcohol content of the stored liquid?
In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out.
Up to what temperature can the containers be used?
For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).
Pack up your HIZO Pizza Oven and feed hungry pizza fanatics wherever you journey
Waterproof. Functions as both a carry bag and a storage cover
The HIZO G14 Portable Gas-Fired Pizza Oven is the perfect no hassle solution to cooking the best homemade pizza outdoors. Fold down the legs of the HIZO G14 and tuck the gas hose underneath. Stretch out the carry bag and catch one end in under the adjustable string piece part and pull over the unit like you would a fitted sheet. There are a total of four clips on the underside. In a cross like pattern put the top left clip into the bottom right. Repeat with the top right to bottom left (refer to product photo if needed).
This carry bag / storage cover has been hot-seamed stitched together for maximum waterproofing.
KegLand Part Number: KL24891
Compatible with the 27L and 55L FermZilla Tri-Conical Series or any 2" or 3" T.C. fittings. This valve comes standard on the Tr-Conical FermZillas where the bottom of the tank attaches to the collection container.
KegLand Part Number: KL26505
Plate heat exchangers are one of the fastest ways to cool your wort and the Chillout is one of the best. The Chillout MKIV, now with new and improved male 1/2" BSP threaded posts, is the fastest way to chill your wort to yeast pitching temperature to get your fermentation off to a quick healthy start. made from stainless steel and brazed together with pure copper. It also has ripples along each plate that create more surface area to improve heat transfer. A great addition to your brewing setup.
Set up one side with Wort in & out, and Water out & in on the other side.
Features:
Made from stainless steel and copper
Rippled plates for more surface area
1/2" Male BSP connections
Dimensions: 12.4" x 2.8" x 2" (not including threads)
KegLand Part Number: KL21234
The great-grandchild of Pinot Noir, Shiraz is a dark-skinned grape that produces some notably striking red wines with a wide ranging flavors of pepper, game, blackberry, spices, chocolate, and more. Also known as Syrah, some of the most exhilarating varietal examples of this wine are made in its native region of France’s northern Rhone Valley. To this day, it is the region’s primary grape and produces classic wines including Hermitage, Cornas, and Côte-Rôtie. Although Syrah or Shiraz are two names for the same grape, which name you see on the label generally indicates what style the winemaker intended to exemplify. Syrah is the classic interpretation of a powerful, complex wine with high tannin levels, whereas Shiraz is more likely to follow the New World translation, which is less assertively tannic and has more fruity, almost jammy flavors. Syrah was first brought to Australia by British immigrant and viticulturist James Busby. After living in Australia for several years, he traveled to Spain and France to continue his studies and brought back vine clippings when he returned. Here is where the grape was first given the name Shiraz and remains the leading grape in the country. Australian Shiraz tends to be less gamey than its Syrah predecessors, and is known to have spirited flavors and aromas of berry and an almost syrupy mouthfeel. Our Australia Shiraz is decadently full-bodied, displaying deep flavors and aromas of black currant and dark chocolate with a distinct meaty element. A moderate oak presence plays well with the wine’s strong, assertive qualities. A dry red wine with a prominent alcohol level of 13.5% by volume. Includes medium toast American oak chips. Medium toast oak is the most popular toast level used in red wines as it imparts a complex balance of vanillin and spice along with a nice mouthfeel. The VineCo Estate Shiraz is a wine lover’s red wine. Not to be poured as an afterthought or used as an alcoholic sidekick to a random activity. Relax with a glass and allow this beverage to be the main attraction. Each sip will command your attention as energetic flavors explode across your palate. If enjoyed with food, be sure to choose fare that can stand up to this dominating varietal. Intensely flavorful barbecued meats or spicy latin dishes are great pairing options. Shiraz, Australia Black currant, dark chocolate, meaty Sweetness: Dry Oak: Medium Body: Full ABV: 13.5% Kit Volume: 10 L Approximate Yield: 23 L Ready to bottle in 6 weeks Bottle Labels sold separately
Californian Chardonnay is a popular choice for everyday enjoyment; light and refreshing Equally enjoyed on a weeknight after a long day of work or on a weekend afternoon next to the grill Flavors of yellow apple, lemon, pineapple, and peach Dry with medium-full body, 13.5% ABV Whip up a batch in 30 mins or less! Yields 6 gallons (2 cases) of finished wine in 6-8 weeks Bottle labels included for a professional finish Originating in the Burgundy region of France, in such famous appellations as Montrachet, Meursault, Poilly-Fuisse and Chablis, Chardonnay is now the most popular white wine style in the world. Chardonnay thrives in a wide range of soils and weather climates from France to Australia. Winemakers love Chardonnay because it produces such a wide range of complex, flavorful wines. From fruit forward and crisp, to lean and minerally, to hedonistic, rich, and oaky, no wine sparks as much stylistic debate as Chardonnay. California Chardonnay offers a full spectrum of expressions, as the grape is widely grown throughout the state from the warmer climate of the Central Valley to the cool, foggy hills near the Pacific coast. Traditionally, California Chardonnay is assumed to be full-bodied with a buttery texture and prominent oak character. But more modern approaches produce examples that have little to no oak character at all and can range from bright and fruity to soft and earthy. Our California Chardonnay is fruit forward, with no oak, and features flavors of apple, pear and apricot. With an alcohol level of 12.5% this is a Chardonnay with a dry finish and a medium body. Easy to drink and appreciated by nearly every wine lover. The VineCo Signature Chardonnay is the perfect everyday wine to unwind with after work. There is something calming about a glass of this shimmering gold liquid resting on your kitchen counter while you make dinner. Or pull a cork at the next weekend bbq and share with friends. It’s always time for Chardonnay. Chardonnay, California Yellow apple, lemon, and pineapple, hints of peach and mineral notes Sweetness: Dry Oak: None Body: Medium-Full ABV: 13.5% Kit Volume: 14 L Approximate Yield: 23 L Ready to bottle in 6-8 weeks Bottle labels included
Replacement gasket for the ForgeFit® 2" butterfly valve. We recommend replacing your butterfly gasket at least every 3 years. If you wait until you have a leak, your valve has already been unsanitary for some time.
Large 24 inch x 24 inch nylon mesh bag. No drawstring. Perfect for large grain additions, fruit wines, and large amounts of hops, oak, etc. for commercial users. Packaged each in a bag with a label.
The beautiful Deconstructing Craft Beer poster is packed with information about the amazing beverage that is craft beer. From perception to ingredients, this poster textually and visually deconstructs craft beer in a way never seen before.
“Craft beer lovers are proud to hold a beer in their hands and admire and discuss the tastes, aromas and colors in their glass,” said Julia Herz, Craft Beer Program Director for the Brewers Association. ”Now those same beer lovers can proudly display their appreciation of craft beer with one of the most informative and beautiful posters on the topic.”
You’ll be seeing this poster in brewery taprooms and better beer bars across the country, and now you can proudly hang it on your wall.
Measures 24"x36"
If you want to add a false bottom to your beloved 20 Gallon Blichmann BoilerMaker™ Brew Kettle in order to use it as a mash tun, this Blichmann 20 Gallon BoilerMaker False Bottom is designed especially to fit seamlessly for that exact purpose. This high quality false bottom is designed specifically for Blichmann kettles, and is necessary to convert one to a mash tun. The Blichmann 20 Gallon BoilerMaker False Bottom is made with a patent pending button louver design that is a hybrid of a perforated false bottom and a slotted manifold, combining the most beneficial qualities of both styles to truly give you the best of both worlds. MoreBeer! also sells the BoilerMaker False Bottom in the following sizes: · Blichmann False Bottom for 7.5 Gallon BoilerMaker Brew Pot · Blichmann False Bottom for 10 Gallon BoilerMaker Brew Pot · Blichmann False Bottom for 15 Gallon BoilerMaker Brew Pot · Blichmann False Bottom for 15 Gallon BoilerMaker G2 Brew Pot · Blichmann False Bottom for 30 Gallon BoilerMaker Brew Pot · Blichmann False Bottom for 55 Gallon BoilerMaker Brew Pot Please Note: This False Bottom is for the BoilerMaker™ G1 & G2 20 gal Brew Pots by Blichmann Engineering™
Male to female elbow. 1/2" BSP. Made from 304 grade stainless steel.
BSP vs. BSPP
BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT.
KegLand Part Number: KL06620
This Brewmaster Series kit was scaled down to a homebrew batch size in collaboration with Firestone Walker Brewing Company
One of the newest takes on the IPA style—Cold IPAs are highly hopped but fermented cold with a lager strain
Includes Simcoe®, Callista, Talus®, Mosaic Cryo®, El Dorado, Idaho #7, Cashmere, Nelson, and Riwaka™ hops
Estimated ABV: 6.7%
Estimated IBUs: 50
Makes 5 gallons of finished beer
A new way to IPA! Firestone Walker's Hopnosis IPA represents one of the tastiest examples of a new beer style that is quickly gaining ground—Cold IPA. These beers feature the massive hopping schedules you'd expect from an IPA but are then fermented cold with a lager strain. This gives the beer a clean, crisp and crushable profile while allowing the hops to be on full display. From the top of the boil to the final post fermentation dry hop, you'll find a long list of delicious hop varieties from the U.S. and New Zealand. One of the standouts is Mosaic® Cryo Hops® which are used as the biotransformation dry hop addition. Prepare to be absolutely mesmerized by Hopnosis IPA's explosion of tropical fruit flavors including mango, passionfruit, white grape, and lychee.
What Firestone Walker Has to Say About Hopnosis:
In early 2022, we launched Hopnosis as our next-generation West Coast-style IPA. Now the time has come to embrace an even more accurate stylistic moniker for Hopnosis: Cold IPA. While IPAs are typically fermented with ale yeasts, cold IPAs like Hopnosis are fermented with lager yeasts. Remember that IPA stands for India Pale Ale, so fermenting an IPA with lager yeasts signifies a break with tradition.
“When you use a lager yeast to ferment an IPA, you get a cleaner and less ester-driven aroma profile,” said Brewmaster Matt Brynildson. “The colder fermentation also creates a lighter backbone that helps accentuate the bright, tropical hops we’re using. So while Hopnosis offers a lot of things you love in a straight-ahead West Coast IPA, the lager yeast is what pushes it toward the Cold IPA style.”
As a result, Hopnosis rings all the bells of a Cold IPA: crisp and crushable, with a clean hop profile.
Makes 5 gallons
Estimated Original Gravity: 1.059-64
SRM (Color Range): 4-5
IBUs: 50
Estimated Original Gravity: 6.7%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Serve beverages at different pressures without the need for multiple CO2 cylinders, dual body regulators, or expensive gas manifolds
Feed a single pressure to the gas board from your regulator and then step down the pressure on each Duotight regulator
Use one line for serving ales, another for soda or seltzer water, and another for carbonating a freshly filled keg
All parts shown are included and snap together quickly thanks to Duotight push-to-connect fittings and rigid plastic joiners
Duotight In-Line Regulators feature built-in pressure gauges that read 0-60 PSI and can be swapped out for different ranges if desired
The Duotight Draft Regulator Board is a simple and cost-effective solution to serving beer and other beverages on draft at different pressures. With a standard CO2 tank and CO2 regulator, you can feed gas at a single pressure into the regulator board and then fine tune individual pressure settings for each gas line via the Duotight In-Line Regulators. These regulators feature built-in pressure gauges that make adjustments super simple and check valves are included as standard so you never have to worry about back flow into the regulator. This kit includes everything you need to assemble your regulator board and can be customized so the gas inlet is on the right or left side—whichever makes the most sense for your home draft setup. Duotight push-to-connect fittings and the precut rigid joiners make assembly a breeze and only takes 10-15 minutes!
The draft board kit comes in two options—with or without shut off valves. These valves offer peace of mind and allow you to shut off gas flow to any line that is not in use. If you ensure that your system has no leaks, they aren't technically needed, and you can always fully tighten your Duotight Regulator adjustment knob for added protection. But that little extra security might help you sleep easier at night! One advantage of choosing no check valves, however, is that it will leave room at the top of the board to label your gas lines.
One of the coolest features of the Duotight In-Line Regulator is that the included pressure gauge can be swapped out for different pressure ranges. The standard gauge reads 0-60 PSI, but if you have one line that will always be used for serving Ales, you can swap to a 0-15 PSI gauge that will be a little easier to read and make precise adjustments. There's also a Digital Pressure Gauge available that provides backlit instant reads and is rated from 0-90 PSI.
Don't need 6 gas lines? Check out the 4-Way Duotight Draft Regulator Board.
Please Note: Full assembly required. The gas board, regulators, and fittings will arrive loose. Please see our instructions and assembly video below.
Stepping Down Pressure
The ideal regulation scenario occurs when the inline regulator steps down the output pressure to at least 10 PSI less than the inlet pressure. For example, if the inlet pressure is 30 PSI, the regulator effectively manages a range from 0–20 PSI on the output side ensuring optimal performance and stability.
Ideal regulation scenario (10 PSI less than inlet pressure)
Example of 30 PSI inlet translating to 0–20 PSI output
Kit Includes:
6-Output Gas Board
(6) Duotight In-Line Regulators
(6) Duotight Check Valves
(6) Duotight Shut Off Valves (if selected above)
(5) Duotight Tees
(1) Duotight Elbow
(23) Rigid Plastic Joiners
NOTE: All Duotight fittings and rigid plastic joiners come as 8mm OD. Mounting hardware is included for the regulators but not for mounting the board itself to a wall or the inside of your kegerator/keezer. If you select the option without shutoff valves, you will be left with some spare joiners after assembly.
These chrome plated tap handles are an excellent upgrade for any kegerator setup. So sleek! So shiny. The perfect mate for any chrome plated or stainless steel draft faucet.
2-5/8" tall. 7/8" wide at the top of the knob.
Kegland Part number: KL01373
Use for long draw systems and as an entry line to a draft box.
Technical Specifications: 3/8" line provides .20 lbs of restriction per foot. Ideally pounds of resistance should equal pounds of applied pressure. 3/8" line holds 3/4 of an ounce per foot. Made from PVC.
Outer diameter of tubing is approximately 5/8"
You'll love the convenience of using this complete gas tubing assembly for draft beer dispensing.
This Gas Tubing Assembly includes a ball lock gas-in quick disconnect fitting, 5 feet of 5/16" gas tubing, and two hose clamps. It's more convenient than having to hunt down all of the individual parts yourself. You'll find several places you can use this assembly in your homebrewing configuration.
High performance primary regulator designed to handle the workload of dispensing from multiple taps without freezing up!
Dual body regulator for setting independent pressure settings—ideal for serving two different beer styles with different optimum carbonation levels
High-pressure and double low-pressure gauges to easily reference CO2 cylinder pressure and the two output pressures
Pressure settings are easily adjusted by hand using the large plastic adjustment knob
CGA320 inlet features a built-in gasket where the unit attaches to the CO2 tank—eliminating the need of replacing fiber washers with each tank swap
Made in the USA. Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment
One-way shutoff valve outlets protect your regulator from backflow and can be turned on/off to stop gas flow without needing to close your tank
When it comes to CO2 regulators, we’ve tried them all. This quality unit by Taprite is our favorite on the market. It’s no wonder this regulator is trusted by so many breweries and beer bars—it represents the best quality at a great price. This dual-body model allows you to send different pressures to two separate kegs from the same CO2 tank!
The things you’ll love about this regulator are:
The large front knobs make pressure adjustment tool-free, easy & fast.
A built-in gasket where the regulator connects to the CO2 tank eliminates the constant replacement of fiber washers every time you change out your tank.
The barbed outlets feature one-way on/off valves which prevent backflow and protect the regulator’s internals.
The gauges are easy to read. The low pressure gauges read from 0 to 60 psi. The optional available gauge cage is the best on the market.
This is the T752HP model, where the HP stands for high performance; it won't freeze up when multiple taps are running at once.
Best of all is the consistent pressure regulation. With many regulators the pressure can 'creep' up over time. This unit holds the pressure rock steady. No drifting.
Built by Taprite, an American company.
