UVAFERM 43 Restart™ is the premier solution for winemakers aiming to rescue stuck fermentations without compromising flavor integrity
Its robust performance and clean aromatic profile make it an essential tool for achieving complete, high-quality fermentations
Rescue stuck fermentations with robust restart performance and clean aromatics
UVAFERM 43 Restart™ is a pre-acclimated, fructophilic yeast strain specifically engineered to efficiently restart stuck fermentations. Developed by Lallemand Oenology in collaboration with Inter-Rhône, this Saccharomyces cerevisiae bayanus strain is optimized to thrive under challenging conditions, ensuring complete fermentation while preserving the wine's sensory integrity.
High Alcohol Tolerance: Effective up to 18% ABV, enabling complete fermentation in high-sugar musts.
Temperature Range: Performs optimally between 55°F (13°C) and 95°F (35°C), suitable for various fermentation conditions.
Fructophilic Nature: Efficiently consumes residual fructose and glucose, common in stuck fermentations.
Robust Fermentation Kinetics: Pre-acclimated cells adapt quickly, reducing mortality rates and ensuring reliable fermentation restart.
Low Nutrient Requirements: Thrives in nutrient-deficient musts, minimizing the need for additional supplementation.
Clean Aromatic Profile: Produces minimal volatile acidity and sulfur compounds, maintaining the wine's varietal character.
Applications:
Stuck Fermentation Recovery: Effective in reviving fermentations in red and white wines, including Cabernet Sauvignon, Merlot, Syrah, and Zinfandel.
High-Gravity Fermentations: Suitable for Amarone, Port-style, and late-harvest wines with elevated Brix levels.
Nutrient-Poor Musts: Performs well in musts with limited nutrient availability, ensuring complete fermentation.
Barrel Fermentations: Effective in completing fermentations in barrels where conditions may be less controlled.
Flavor Profile:
Neutral Sensory Impact: Preserves the wine's natural varietal characteristics without introducing off-flavors.
Clean Finish: Ensures a crisp, balanced finish, integrating seamlessly with the existing wine structure.
Usage:
Rehydration: Rehydrate in 10 times its weight of chlorine-free water at 104°F (40°C) for 15–20 minutes. Stir gently to prevent clumping.
Acclimatization: Mix rehydrated yeast with 10% of the stuck wine for 20–30 minutes to allow adaptation.
Pitch Rate: Use 1–1.5 grams per gallon (0.25–0.4 grams per liter) for effective restart.
Nutrient Addition: Supplement with yeast nutrients to optimize yeast health during recovery.
Fermentation Temperature: Maintain between 64°F and 86°F (18°C–30°C) for optimal performance and restart reliability.
Monitoring: Regularly check Brix and temperature to ensure progress and prevent re-stalling.
VEE GEE® X-Series Handheld Refractometers are exceptionally simple to operate and provide quick, accurate measurements. This beer refractometers is an excellent way to measure the sugar content in your wort during the mash, pre-boil, and post-boil steps of the process. The Beer Wort Brix Refractometer features dual scales in Specific Gravity and Brix.
Easy to Use
Operation consists of placing 1 or 2 drops of sample on the prism, closing the daylight plate over the sample, then looking through the focusable, cushioned-rubber eyepiece for the readings.
Tool-Free Calibration
The VEE GEE® exclusive Zero-Ring eliminates the hassle of using a separate tool for calibration. Simply place a few drops of distilled water or liquid standard (R.I. oil or prepared sucrose solution) on the prism, turn the built-in Zero-Ring until the shadow line is at the correct value of the liquid, and secure the set screw that's it.
Accurate
Featuring the largest, easiest-to-read scale available; with clear, sharp figures, screen shading, and incredible contrast. These features significantly enhance overall accuracy even when several different operators use the instrument. Automatic Temperature Compensation frees the user from having to re-calibrate in work environments with large temperature swings. The effective compensation range is 50-86 F(10-30 C). All units feature rubber grips on the body, which block the transmission of hand heat to reduce temperature errors.
Durable
The X-Series models feature rugged construction to provide years of reliable use. The prism is mounted in an all-metal housing which allows the sample and prism to reach temperature equilibrium quickly. Also feature non-roll stands to ensure that once the units are placed on a table or bench top, they won't be prone to roll off the surface.
Compact & Portable
The small size of the X-Series models allows them to be used anywhere the field, plant, or lab.
Scale: SG & Brix
Range: 1.000-1.130 SG or 0-32% Brix
Resolution: 0.2
Accuract: ± 0.2
ATC: 10 to 30 ºC (50 to 86 °F)
Calibration Liquid: Distilled Water
A pickle packer is an ideal tool for making fermented sauerkraut, kimchi, or other vegetables. Works well for tamping down a full jar of veggies, mashing them to release their juices, and to remove any air bubbles that may be present. The slender design allows it to be used for both wide and regular mouth mason jars. Can also be used to muddle mint leaves, citrus and spices when making cocktails.
Made from European Beech Wood
Replacement RO membrane for the BrewRO System. The RO membrane should be changed every 3 years.
Only use HbrewO replacement filters on your BrewRO System, failure to do so can damage the system.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Everything you need to have some fresh beer on the go. This ultimate growler is made from double wall, vacuum insulated stainless steel which makes it impervious to oxygen and sunlight. The included pressure lid allows you to pressurize the growler up to 30 psi with the provided mini CO2 regulator. The regulator uses 16 g threaded CO2 cartridges.
Includes:
2 L stainless steel growler
Pressure lid with plastic tap
Mini CO2 regulator
6 CO2 cartridges
Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.
VL3 is a Bordeaux isolate that was selected following in-depth research identifying the molecules responsible for Sauvignon Blanc aroma. VL3 was found to enhance Sauvignon Blanc varietal characters and aromas (Mercaptopentanone, Mercaptohexanol, etc.) Subsequent experimentation has found this to be true of other white varietals such as Riesling, Pinot Gris, and Pinot Blanc as well. VL3 is well suited to aging on the lees and produces very low levels of VA and SO2. A premier yeast for Sauvignon Blanc fermentation worldwide. It is important to note that many of the sought after compounds that are enhanced by VL3 are actually sulfur based, so the use of oxygen and or Cu (copper) will effectively diminish or even remove them from the final wine if used in excess. Therefore, the use of nutrients is strongly recommended to avoid any H2S problems that would require oxygen or Cu to counteract. Best results from 60 to 68 degrees F, with an alcohol tolerance to 14%. Download the PDF Download the PDF
Precise hydrometer for measuring the sugar content and progress of fermentation in wine ferments. Comes with a thermometer/correction scale built-in. Please Note: Due to the large size of this hydrometer, it does not work with our standard 11" or 14" hydrometer jars. We recommend using our 500mL Graduated Cylinder (MT636D) with this hydrometer.
Our preferred method to cool, and invented by MoreBeer! customer Jamil Zainasheff. How it works: Wort travels from the kettle to a pump and back into the kettle via a short copper arm that aims the hot wort into the wall of cooling coils. This creates a flow of hot wort across the coils of your wort chiller and throughout your kettle. The movement of wort creates a fast heat exchange, and uses far less water than a traditional wort chiller.
Recirculating the wort in the same vessel allows you to continue chilling until your wort gets to the proper pitching temperature before transferring to your fermenter. Add a thermometer into your boil kettle to get consistent results every time! Start recirculation before the end of the boil so everything the wort moves through will be sanitized. Most of the chilling happens on the outside of the coil allowing for a much simpler cleanup. Comes with instructions, 2 zip ties, one hose clamp and copper re-circulation tube 1/2". This system does require the use of a pump, like our H315HF High-Temp pump.
A wort chiller will need to be purchased separately. This option works on our WC30, WC45, WC50, and WC55 only.
1/2"OD, 3/8"ID
25 1/2" Double Bent 1/2" Copper Piece For Recirculation Chilling Bent Perpendicular 90 Degrees at 5" and 5"
Digital model, featuring large easy to read numbers. Complete with magnet and clip for quick mounting. Capable of timing down 19 hrs or up 20 minutes. Includes a single AAA battery.
If you’re a coffee roasting nerd like us, then this is the home roaster for you! The SR540 is the newest addition to the SR family and comes with a ton of upgrades and new features. A whopping 80% of the components have been upgraded, including new control boards and fan. The heat, fan, and time can all be adjusted by simply pushing in and turning the knob. The SR540 features a real-time temperature read out, allowing you to quickly check the current temperature with a quick turn of the knob. Instead of a general Low, Medium, and High temperature setting, this unit features 9 levels of heat adjustment. If you want to take your home roasting to the new heights, don’t sleep on the Fresh Roast SR540!
120 gram / 4.2 ounce roast capacity (apprx. 4 scoops)
9 level heat adjustment
Easily control heat, fan, and time settings
120V power
Please note: overall roasting time may vary depending on your household outlet's voltage rating, as well as the overall size, density and moisture content of the beans.
This shortened malt pipe will enable our 50L Braumeister to brew 25L batches (from 10 gallons to 5 gallons). The way these Braumeisters function during the mashing stage, a smaller batch than 50L is usually not an option. By utilizing this shortened mash pipe, you can now brew either a 5 or 10 gallon batch with your 50L Braumeister!
Lalvin QA23 is the ideal choice for winemakers seeking to craft bright, aromatic white wines and fresh, fruit-driven rosés Its ability to enhance varietal character while maintaining fermentation reliability makes it a valuable tool in producing wines with exceptional clarity and balance Strong fermenter for varietal expression in highly clarified white juice Lalvin QA23 is a premium wine yeast strain, selected in Portugal by the University of Trás-os-Montes and Alto Douro (UTAD) in cooperation with the Viticultural Commission of the Vinhos Verdes region. Renowned for its ability to enhance aromatic intensity, fruit clarity, and mouthfeel in white wines, QA23 is particularly effective in fermenting highly clarified musts at low temperatures, preserving delicate esters and fresh aromatics. Enhanced Aromatic Expression: QA23 exhibits high β-glucosidase activity, facilitating the release of bound terpenes and enhancing varietal aromas, especially in thiol-rich varieties like Sauvignon Blanc. Clean Fermentation Profile: Produces low levels of volatile acidity and sulfur compounds, maintaining pure fruit character and aromatic clarity. Alcohol Tolerance: Effective up to 16% ABV, supporting complete fermentation in high-sugar musts. Temperature Range: Performs optimally between 57°F and 82°F (14°C–28°C), ideal for cool fermentations that preserve fresh aromatics. Low Nutrient and Oxygen Requirements: Thrives in musts with low turbidity and nutrient content, reducing the risk of sluggish fermentations. Applications: Aromatic White Wines: Perfect for Sauvignon Blanc, Chenin Blanc, Colombard, Gewürztraminer, Muscadelle, Pinot Gris, Riesling, Semillon, Viognier, and Roussanne, enhancing bright fruit and crisp acidity. Rosé Wines: Elevates strawberry, peach, and citrus notes, creating a fresh, vibrant profile. Fruit Wines and Ciders: Ideal for apple, pear, and tropical fruit wines, delivering clean, expressive aromatics. Sparkling Wines: Excellent for Charmat and Traditional Method sparkling wines, promoting brightness and clean fermentation. Flavor Profile: Citrus & Tropical Fruits: Vibrant expressions of lemon zest, pineapple, and grapefruit. Floral Aromatics: Subtle notes of orange blossom, honeysuckle, and white flowers add elegance. Fresh, Clean Finish: Maintains a crisp, bright mouthfeel with lingering fruit character. Smooth Mouthfeel: Promotes balanced acidity and smooth texture. Usage: Rehydration: Rehydrate in 10 times its weight of chlorine-free water at 95°F (35°C) for 15–20 minutes. Stir gently to prevent clumping. Pitch Rate: Use 0.2–0.4 grams per liter (1–1.5 grams per gallon) for optimal fermentation and flavor enhancement. Nutrient Addition: Supplement with yeast nutrient to optimize fermentation, especially in low-nitrogen musts. Fermentation Temperature: Maintain between 57°F and 82°F (14°C–28°C) for optimal ester retention and aromatic clarity. Download the PDF Download the PDF
This Duotight 8 mm (5/16") adapter is designed to suit the Nukatap Mini and will allow you to couple the faucet to a wide range of other 8 mm Duotight fittings. This includes attaching it to the Duotight Flow Control Ball Lock Disconnect. This particular type of flow control ball lock disconnect includes a "tang" at the top of the push in fitting that couples with this adapter. The combination of the two fittings prevents the faucet from spinning around while in use. Sold Separately: NukaTap Mini Beer Faucet (D1598) Flow Control Ball Lock Disconnect (DUO159) Mini Self Closing Spring (D1598A) KegLand Part Number: KL32209
Remove a threaded keg spear from your Sanke kegs for cleaning and maintenance Compatible with D-Style and S-Style threaded spears Attaches directly to the 1/2" drive of an impact driver or pneumatic rattle gun This keg opening tool attaches directly to a 1/2" drive so it can be used with an impact driver or pneumatic rattle gun. This makes fitting and removing keg spears really fast and can save a ton of time when working with a high volume of kegs. Compatible with D-Style and S-Style kegs with threaded spears. There are two styles of Sanke kegs, those with a threaded-in spear and those that use a retaining ring, or circlip, to hold in the spear. This tool is designed for use with D- or S-Style Sanke kegs with threaded spears. For the more popular (in the USA) D-Style circlip-style Sanke kegs, use tool KEG860. Please Note: this tool does not remove the retaining ring. Once the keg has been depressurized, you will have to remove the ring by hand. KegLand Part Number: KL14908
Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.
Nothing looks quite as nice as beer pouring out of a shiny stainless steel draft tower. These are the same tower kits included with every KOMOS Kegerator, featuring Intertap stainless steel faucets, EVABarrier draft tubing, and Duotight push-to-connect fittings for easy assembly. The tower is made from 304 brushed stainless steel, making them corrosion resistant while also looking great!
Stainless Intertap Faucets and Towers
These kits come with Intertap faucets mounted on a brushed stainless tower. Intertap faucets are the newest, most advanced, forward sealing, beer faucets on the market today and will work perfectly for years. Forward-sealing means that while in the closed position the faucet will keep beer inside the body instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Intertap faucets feature a modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout.
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our tower kits come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each tower comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
Includes:
Stainless steel draft tower
Intertap faucet(s)
Stainless steel faucet shank(s) with Duotight tailpieces
EVABarrier gas and beverage tubing
Beverage line measures 4mm ID x 8mm OD
Gas line measures 5mm ID x 8mm OD
Draft tower mounting screws
Faucet wrench
1-3 Tap Tower Dimensions:
13.4 in. tall (without faucets)
3 in. tower diameter
4.4 in. base diameter
4 Tap Tower Dimensions:
16 in. tall (without faucets)
4.5 in. tower diameter
Interior mounting holes (does not include bottom collar)
The highest quality plastic ball lock quick disconnect available to homebrewers
Smooth operation—clicks into place on keg posts and is easily removed
1/4" barb for 1/4" or 3/16" ID draft line
CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment
Gray plastic clearly identifies the disconnect as the gas in QD
This is a high quality plastic quick disconnect made by CM Becker for your gas line.
Barb is 1/4". 1/4" or 3/16" beverage tubing is recommended for gas line.
Note: Sometiems ball lock fittings can be difficult to get fully seated on a Cornelius keg. We recommend using a quick spray of sanitizer solution to act as a lubricant and giving it a few twists while applying the ball lock.
750mL spirit bottles with thick glass base and bar top finish
Clear or "flint" glass to proudly display the color of your spirit
Jersey design with sharp, flat shoulders offers a distinguished appearance on the shelf
The Jersey spirit bottle features a thick glass base, flat shoulders, and bar top finish. Perfect for whiskey, gin, vodka, and other spirits. A robust bottle with sharp lines that offers a distinguished appearance on the shelf for any spirit you fill it with.
Volume: 750 mL
Style: Jersey / Round Shape
Use: Distilled Spirits
Color: Flint / Clear
Finish: Bar Top Closure
Neck Opening: 21.5mm
Bottom: Thick Glass Base
Case QTY: 12
Pallet QTY: 90 cases
Our Farro Glass Premium Bottles offers a full lineup of the most essential and commonly used bottles. We scoured the world to find a bottle source that could provide a quality product consistently and at a fair price that we can pass on to our customers. If you've been searching for reasonably priced bottles that are reliably in stock, look no further.
Oak Dominoes (longer contact time than cubes or chips)
Medium Plus toast level
Fire Toasted by hand
Made from winery quality Hungarian/Slavonian Oak
These Balazs Oak dominoes feature Medium Plus level toast. Recommended for use during short term aging for 4-5 months. As a starting point use 1 oz per gallon. Taste after four months and add more if needed.
Balazs segments are made from Slavonian oak. Slavonian oak is grown in the area of Croatia that borders Hungary. While the area of Slavonia has changed hands many times, being under Hungarian control in the past, what has always remained constant is the quality of the oak grown in the region. Slavonian oak is beloved in Italy where it is widely used in the traditional and classic Italian wines of the Veneto, Tuscany and Piedmont. It is known for having the utmost respect for the fruit which is why Italian producers extensively use this oak. This makes this oak extremely useful for home winemakers who, because of the small quantities being made, need to pay special attention to not over oaking their wine.
Use: Short Aging
Form: Dominoes - 2" x 1" x 0.4"
Time of Contact: 4-5 months
Recommended Quantity: 0.8-1.1 oz/gal
Type: Medium Plus Toast
Replacement DPDT Power Relay for the Semi Automatic Cannular Pro. If the motor of your Cannular Pro is not turning off after running through a full rotation then you may need to replace the power relay. This relay distributes power to the motor when the operation button is pressed and also turns the motor off once the microswitch has been activated and hence the Cannular has run through a full seaming rotation.
Specifications:
Model: JQX-13F(D) 8-Pin
Voltage & Current Ratings:
10A 250V AC
10A 24V DC
KegLand Part Number: KL21524
Trubinator is a product for use in your brewing system or boil kettle. During whirlpool, hops and other particles will gather in the middle of the filter, making it possible to pumpe more clean wort to your fermenter. A single wingnut and bolt holds the filter in place, so it's easy to disassemble for cleaning. Diameter: 420mm (16.5") Height: 90mm (3.5") Standard filter: R2x5 For User Manuals and support, please follow this link to Brewtools Docs.
This super handy Solenoid Valve is compatible with 1/4" or 6.35 mm OD PE Water Line or EVABarrier tubing. This size tubing is often used on water filtering systems or reverse osmosis systems, and can be used with an Inline Regulator to drop your mains water pressure if needed. Unlike some other solenoid valves this is a direct acting solenoid valve meaning the solenoid valve can go down to 0 pressure. This makes it quite handy for controlling CO2 flow or other low-pressure gasses. Suitable for pressures up to 115 psi (8 bar) so it will handle water pressure with no problem at all. Made from high-quality metal and POM engineering plastics so it is durable and suitable for contact with a wide range of chemicals and beverages. Specs: Inlet/Outlet: 6.35 mm (1/4") Pressure Rating: 0-115 psi (0-8 Bar) Mode: Normally Closed (NC) Solenoid Coil Voltage: 12V Solenoid Coil Amp Draw: 1.1A KegLand Part Number: KL09478
Replenishes the SO2 Titrant provided with the SC-100 and SC-300. Good for up to 50 tests. Guaranteed for 6 months. To avoid cross-contamination with other reagents, use a dedicated pipette to dispense the acid reagent. Store reagents in a dark, cool place with the bottle tightly sealed to maximize shelf life.
No, you don't need to spend a fortune to start roasting your own coffee. This kit will get you set up with everything you need to start off in style. Although the Whirley-Pop was designed for popcorn, it also does a great job roasting coffee. We have modified the popper so that it holds a thermometer capable of reading up to 550°F degrees, which makes for more consistent roasting results.
This kit also includes a stylish Bodum® 8-cup French Press - a truly gourmet method of brewing specialty coffee. Also included is "Home Coffee Roasting: Romance and Revival" - an excellently written, incredibly informative, and authoritative book written by Kenneth Davids (a big name in the coffee industry). You will be roasting like a pro in no time!
You Get What You Pay For:
When purchasing a Coffee Starter Kit from us, keep in mind that you purchase more than a book and some equipment. Along with every one of our products we provide a wealth of knowledge and advice. Coffee tasting and roasting notes, product reviews, tutorials, experiment summaries, and phone or email customer support. We are serious about quality coffee and products as well as excellent customer service. Your satisfaction is guaranteed.
Kit Includes:
Whirley-Pop Coffee Roaster (w/ Thermometer)
8-cup Bodum® Brazil French Press
Home Coffee Roasting: Romance and Revival
Three pounds of quality green coffee beans!
This is the Cornical Keg only. For the Fermentation Kit check out BL279 or for the complete kit check out BL275. The Cornical™ is a new, unique offering from Blichmann that allows you ferment and keg in the same vessel. Saving you on both time and labor. Built with sanitary stainless steel and rated up to 50 psi you can perform a no chill transfer and ferment under pressure. It is made from two main pieces. The first is a modular keg with a removable base that makes cleaning fast and easy. The second part is a versatile conical bottom that clamps onto the keg and converts it into a pressure capable fermentor. With the upcoming addition of Spunding valve accessory you will be able to control pressure during fermentation. Allowing you to have even greater control over your fermentation profile. This modular design allows you to use the conical bottom to ferment another batch on a different keg while you carbonate and drink your first batch all in same fermentation vessel. Thus eliminating the kegging step and cutting down the risk of possibly introducing your beer to oxygen and bacteria. Features: Ferment, carbonate, and serve all from a single vessel Sanitary sample valve with rotating racking arm Keg can be used as a fermentor or a serving keg Cleaning made easy with a removable bottom 1.5 in. butterfly dump valve Rated up to 50 psi Made from sanitary stainless steel Note: The Cornical can be bought as a complete system (both Keg and Fermentation Kit) or you can buy a Keg or Fermentation Kit on their own.
This is the indicator added to the Hydrogen Peroxide in an Aeration-Oxidation Free SO2 Test. Use 3-6 drops per test, store capped in a cool, dry place. 1 oz container.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid August.
Brand-new stainless steel beer keg with US-standard MicroMatic D System Spear
Sixth Barrel Keg holds 55x 12 oz beers or 41x 16 oz pints
Compact and easy to fit multiple kegs in home kegerators or keezers
Commercial quality construction—produced and tested in an ISO 9001 Certified facility
Supply your brewery with the best kegs on the market with these 5.16 gallon 1/6 Barrel US Sanke Kegs. Our kegs are produced and tested for quality in an ISO 9001 Certified facility, abiding by strict quality control standards. Each keg is constructed entirely of Stainless Steel, ensuring a long serving life for your brewery.
The sixth barrel keg, commonly referred to as a sixtel keg, is a great option for bars and restaurants that want to offer a variety of beers but don't have the space for multiple full size kegs. They're also a great option for kegerators, as two or three sixtels will fit inside depending on the model.
Holds 55 x 12 oz beers (41 x 16 oz pints).
Features:
5.16 gal (1/6 bbl) US Sanke keg
304 Stainless Steel Construction
23" Height, 9.25" Diameter
MicroMatic D System (U.S. Sankey) Spear
Working pressure is 43.51 psi (3.0bar)
Give your beverage the absolute best protection from oxygen staling with KegLand's Low2 O-rings!
Made from a special blend of materials, these gaskets offer vastly improved oxygen barrier properties compared to Silicone or EPDM
The result is your beverage staying fresher for longer!
Compatible with KegLand's 20L Oxebar Mono PET Keg
These seals replace the red O-ring seal inside the 20L Oxebar keg lids.
What is Low2?
Low2 O-rings are the new golden yellow standard of homebrew kegs brought to you by KegLand. Why? Because of their unique composition (Synthetic M-Class and Cross-Linked Elastomers), they have superior oxygen barrier properties than that of the previous silicone O-rings. This results in your beverage staying fresher for longer.
The same Low2 O-ring material was independently tested on 5-gallon stainless steel kegs by GunnLab, an Australia-based plastic packaging testing laboratory. See below for a printout of the test results.
KegLand Part Number: KL38003
These coils offer a sturdy, compact solution for custom jockey box builds The square-shaped coils hug the cooler walls, maximizing internal space for additional beverages Pair with the optional retention brackets to secure the coils in place, even when dumping out ice slurry after use Equipped with 8mm Duotight Adapters for easy connection to EVABarrier tubing The square shaped draft coils offer a unique and useful coil option for those building their own jockey box. These coils will hug the sides of your cooler walls and can be secured in place with optional retention brackets, allowing you to easily dump out your ice slurry after use without the internals of the jockey box spilling out. The square shape also leaves plenty of space within your cooler to pack extra canned and bottled beverages in the ice. Includes 8mm Duotight Adapters on the coil ends for use with 8mm OD EVABarrier tubing. Or the adapters can be removed so you can use the coil with your preferred 1/4" or 5/16" ID tubing. If you're looking for a pre-assembled option, these coils are featured in the KegLand 4-Tap Jockey Box. Specs: 2 Draft Lines Line Length: 45.9 ft. (14m) Coil Dimensions: 11" L x 9" W x 9.5" H KegLand Part Number: KL40087
Take your beer on the go with the help of this handy growler filler attachment for Perlick 630SS and 650SS faucets. Filling growlers straight from the tap is tough task, and you're more than likely to lose most of the beer's carbonation in the process. By running a short line of 3/8" tubing from the growler filler to the bottom of your growler, the beer can flow gently into the vessel and fill from the bottom up. Be sure to use the flow control knob to slow down the flow rate. If you're using the standard faucet, you may want to turn down the PSI on your regulator before filling.
Add the perfect amount of restriction to any beer line to reduce foam. Eliminates the need for flow control in the faucet itself. Great for use in Jockey Boxes or anywhere you are serving beverages with varying levels of carbonation.
If you are currently using a long length of tubing to increase restriction you can now shorten your tubing. A shorter line holds less beer. Beer that is stored in the line tends to warm up quicker, adding to foaming issues, and is more likely to stale from bacteria present in the line.
Features:
Adjust flow with an included Allen wrench (keeps unauthorized people from adjusting the unit)
Eliminate foam from beer or slow down / speed up other beverages
Fix systems with issues without having to replace lines or faucets
Take the guesswork out of line restriction. You can use shorter lines and still have perfect restriction. You can also use larger ID lines and adjust as necessary.
Easy to disassemble for cleaning, clear body for easy monitoring
Made in Germany by CM Becker from Food grade plastic and stainless steel parts!
Comes Equipped with 2 x 3/16" Barbs
Easy to install to any existing beer line (cut line and install two clamps)
Protect your regulator from damage in the event your tank gets knocked over. A Gauge Cage is cheap insurance that can help save you a costly regulator replacement.
Mounting bolt and washer included.
CO2 and Nitrogen tanks, especially the 5lb size most brewers use, are notoriously wobbly and easy to knock over once the regulator is mounted on them. This handy Gauge Cage helps protect the gauges themselves, as well as the fragile points where they thread into the regulator body, from damage in case of a fall.
Specifically sized to fit our D1060 and D1070 Taprite brand ragulators, these cages may not fit some budget regulators manufactured overseas.
Flash Brewing® Kits from MoreBeer!® require only 10 minutes to brew. Just mix and ferment.
A clean, neutral, low-calorie seltzer base designed to finish quickly with minimal fermentation character
Includes True Citrus True Lemon flavoring, made from real citrus juices and oils that are dried and crystallized for easy use and consistent results
Estimated ABV: 5%
Makes 5 gallons of finished seltzer
Hard Seltzer Flash Brewing® Kit
Flash Seltzer is a simplified system for producing clean, low-calorie hard seltzer with a strong focus on clean fermentation and minimal off-flavors. Sugar-based fermentations lack the natural nutrients found in beer and wine. This kit pairs Flash Yeast with CellarScience Dynamo 800, a nutrient formulated specifically for seltzer fermentation.
Dynamo 800 supplies the nitrogen yeast need to ferment efficiently in sugar-only environments, supporting a clean-fermenting process that helps minimize the risk of sulfur, fusel alcohols, and other off-flavors. Fermentation can finish in as few as 5 days.
Flash Brewing® Kits
Introducing MoreBeer!'s Flash Brewing® Kits! Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. This streamlined process not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home.
Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing® eliminates the need to boil. Our Flash Brewing® malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets for flavor. Flash Yeast™ starts quickly and consistently produces clean beer that lets the malt and hops shine. The result is a high-quality beer that will absolutely surprise you.
If you want to read more about the development of Flash Brewing® at MoreBeer! or have more questions please read our Frequently Asked Questions.
Equipment Required for Flash Brewing®
Flash Brews can be fermented in any wide mouth 6 or 7-gallon fermenter you already own. We suggest a wide mouth fermenter so you can easily pour in the ingredients. The 7-gallon Fermonster fermenter is a perfect choice. If you are new to brewing and need a fermentation kit, see below.
Includes:
Dextrose (Corn Sugar): 5 lbs
CellarScience® Dynamo 800 Seltzer Nutrient
Flash Yeast™
True Citrus® True Lemon®
Flash Seltzer Instructions
The perfect match for the Brewtools Troll Brew Table 220 lb lifting capacity Height adjustable (6 levels) Flexible lifting bracket Flexible pulley placement on boom PureBlast™ surface The Brew Crane allows you to easily lift and swing the malt pipe of the Brewtools Brewing System. The Troll Table comes ready for the crane to be installed. The crane can lift 220 lbs. A universal lifting bracket is included. It is possible to use the crane without the Troll Brew Tables at your own risk. The hole needed for the bushings is 64mm. Specifications: Ceiling height requirement: 72.6" to 92.3" Height requirement is based on model of brewing system you have For more detailed specs, please follow this link to Brewtools Docs
Lifting height above table top: 39.75" to 59.5" Weight assembled: 29 lbs Material: AISI 304 In the box: Crane, 3parts Lifting bracket Bottom support Winch bracket Winch Support leg with adjustable foot (2) S-hooks Nylon pulleys and bushings Tools and bolts for assembly Brewtools Troll Table sold separately
Note: The maximum weight must never been exceeded. Crane must only be used with support legs or a low frame bolted to the side you lift towards. For User Manuals and support, please follow this link to Brewtools Docs.
750mL spirit bottles with thick glass base and bar top finish
Clear or "flint" glass to proudly display the color of your spirit
Oregon design with rounded shoulders offers am artisanal appearance and feels great in the hand
The Oregon spirit bottle features a thick glass base, round shoulders, and bar top finish. Perfect for whiskey, rum, tequila and other spirits. A robust bottle with rounded lines that feel great in the hand and gives your spirit a more artisanal appearance.
Volume: 750 mL
Style: Oregon / Rounded Shoulders
Use: Distilled Spirits
Color: Flint / Clear
Finish: Bar Top Closure
Neck Opening: 21.5mm
Bottom: Thick Glass Base
Case QTY: 12
Pallet QTY: 90 cases
Our Farro Glass Premium Bottles offers a full lineup of the most essential and commonly used bottles. We scoured the world to find a bottle source that could provide a quality product consistently and at a fair price that we can pass on to our customers. If you've been searching for reasonably priced bottles that are reliably in stock, look no further.
For use with the 65L BrewZilla Boiler Extension Kit. It does not come with an extra Wire Malt Pipe Support Ring. If you're using the extended malt pipe with the 65L DigiBoil, you will need to purchase the ring separately. If you're using the malt pipe with the 65L BrewZilla you can either move your ring up to the boiler extension, or buy an additional ring so you can remove the malt pipe in two steps.
You will also need the Ricirculation Arm Extension to continue using the BrewZilla's recirculation arm.
Compatible with 65L Gen 3 / Gen 4 BrewZillas.
Example image of the 35L model shown here.
KegLand Part Number: KL32834
Convert 1" BSP fittings to 1.5" tri-clamp. Made from 304 stainless steel.
BSP vs. BSPP
BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT.
Kegland Part Number: KL23443
The Essential Kits are designed to get you up and brewing with one click. It's highly recommended you add this to your cart with the purchase of a Brew Bucket Series.
Hose Barb | ½” 90° for Blow-Off
Tubing | ½” ID Silicone (2ft)
Tubing | ⅜” ID Silicone (5ft)
Hose Clamps (2)
The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects. These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi. All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path. O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel.
This is a Female Socket, which can connect to any H501 Series Male Plug. It has a 3/8" Hose Barb on the other end for attaching any 3/8" ID tubing. This QD is equipped with a shutoff valve. When not connected to another QD, this will not allow any flow.
While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup does offer a few advantages. These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems. The pricing of these products is more economical, yet the plastic is still medical grade. All in all, these are a premium lineup of quick disconnects with great features and lots of options.
Features:
LinkTech brand 60PS Series
Equipped with Shutoff Valve
Connections:
Female Socket Quick Disconnect
3/8" Barb
Medical Grade Materials:
Body: High-Strength Polypropylene
Spring: 316 Stainless Steel
O-Ring: EPDM
Operating Pressure: Vacuum to 60 PSI
Temperature Tolerance: -40 to 280°F (-40 to 138°C)
3/8" Flow Path
Interchangeable with CPC - Colder HFC35 Series
Replacement 6W high temperature magnetic drive pump for 220V Gen 4 BrewZillas. Compatible with 35L & 65L units.
This pump is not backwards compatible with Gen 3 or older units.
KegLand Part Number: KL24341
Originating in the Burgundy region of France, in such famous appellations as Montrachet, Meursault, Poilly-Fuisse and Chablis, Chardonnay is now the most popular white wine style in the world. Chardonnay thrives in a wide range of soils and weather climates from France to Australia. Winemakers love Chardonnay because it produces such a wide range of complex, flavorful wines. From fruit forward and crisp, to lean and minerally, to hedonistic, rich, and oaky, no wine sparks as much stylistic debate as Chardonnay. Chardonnay is the most popular white grape in Australia and third most popular grape overall. Its ability to grow well in both warmer and cooler climates allow Australian Chardonnay to offer a wide range of regional expressions. The cooler climate of Yarra Valley or the Limestone Coast produce reserved, clean white wines while the warmer climate of Barossa Valley or McClaren Vale boast riper fruit that results in more rich, tropical fruit-forward wines. As with many New World examples of Chardonnay, the wine from Australia is generally characterized as being more ripe, round, and fruit forward than those you might find from France. Our Australia Chardonnay is fruit forward and features flavors of tropical fruit, ripe peach, and toasted vanilla. With an alcohol level of 13% this is a Chardonnay with a dry finish and a medium body. Fermented with medium toast oak chips. Medium toast oak is the perfect choice to impart body and mouthfeel along with a hint of oakiness. Easy to drink and appreciated by nearly every wine lover. The VineCo Estate Chardonnay is the perfect everyday wine to unwind with after work. There is something calming about a glass of this shimmering gold liquid resting on your kitchen counter while you make dinner. Or pull a cork at the next weekend BBQ and share with friends. It’s always time for Chardonnay. Chardonnay, Australia Tropical fruit, ripe peach and toasted vanilla Sweetness: Dry Oak: Medium Body: Medium ABV: 13% Kit Volume: 10 L Approximate Yield: 23 L Ready to bottle in 6 weeks Bottle Labels sold separately
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
