This stainless steel ball lock cap features soda bottle threads, allowing you to convert a 1 or 2 liter soda bottle into a convenient travel growler. The ball lock is compatible with both gas and beverage disconnects, so you can charge the PET bottle before you leave the house and dispense on the go. Attach 3/16" or 1/4" ID tubing to the barb to serve as your dip tube and you're all set! These caps also work great for quickly and conveniently cleaning your draft lines. Mix up a small batch of line cleaning solution in a soda bottle, attach the ball lock cap, and then connect it to your beverage line. Place a bucket below your tap to catch the cleaning solution and open your faucet. Then simply turn the bottle upside down and squeeze it to push solution through your line and out the faucet. You can also choose to pressurize the bottle first, but squeezing the solution through is just as effective. Fermenting with the FermZilla? This is the same ball lock fitting included with the FermZilla Pressure Kit and it's also compatible with the FermZilla Collection Container. If you use the collection container to add dry hops, attach one of these caps and you'll be able purge the container of oxygen before opening the dump valve to introduce the hops. Attach some tubing and diffusion stone and you can oxygenate your wort through the collection container as well! Features: Liquid and Gas Ball Lock Compatible Disassembles for Easy Cleaning Made from Stainless Steel 28mm PCO 1881 Threads Please note: The threaded section of the bottleneck must be at least 1/2" long to form a seal. These caps are not compatible with the KegLand 500mL PET Bottles. Kegland Part Number: KL00826
Cherry soda extract from Rainbow Flavors. Concentrated flavor extract for making your own sodas. Mix with water and sugar, then either carbonate by bottle conditioning with yeast, or force carbonate in a keg.
One 2 fl oz bottle makes 4 gallons of soda. Recipes and mixing instructions for different size batches are included.
One 1 gallon jug makes up to 256 gallons of soda.
The DigiBoil is a versatile electric kettle that can be used as a standalone unit or integrated into your current brew system to serve a variety of functions. Easily brew 5-gallon extract batches. Use it to preheat your strike water or sparge water to a precise temperature. Pair it with a pump and heat exchanger to use it for HERMS brewing. Or slap on a still top lid and condenser for distilling! With so many ways to use the DigiBoil, and an affordable price tag to boot, it's hard not to get excited about this electric kettle!
The Gen 2 DigiBoil features an upgraded glass lid, allowing you to monitor your heated or boiling liquid.
Interested in using the DigiBoil for all-grain brewing? With the Mash Upgrade Kit, you can easily convert the DigiBoil into an electric mash tun!
This DigiBoil model has two built-in heating elements that run off a 220V plug. One element is 1900w and the other is 500w for a combined 2400 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage both elements to quickly go from steeping temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s).
If you have access to 220V power, this is definitely the unit we recommend. Although 110V power is enough to get up to boil, 220V will get you there faster and provide a much more vigorous boil.
Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach 1/2" FPT fittings if desired.
Features:
304 stainless steel construction
9 gallon total capacity
Digital temperature control
220V / 15A power
NEMA 6-30 plug (5 ft. cord)
Dual heating element control (1900w and 500w)
Heating elements are concealed for easy cleaning
304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2")
Stamped-in volume markers (gallons & liters)
Glass lid
Temperature reads in °F or °C
With elements turned off, hold both +/- buttons to switch between °F or °C
Compatible with reflux and pot still (DS130& DS120)*
External Dimensions: 29" H x 15" W (including handles)
Internal Dimensions: 19.5" H x 11.75" W
ETL Listed
*Distilling: to use the DigiBoil with a distilling condenser, you will need to purchase the Distillation Lid.
Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States. It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA).
KegLand Part Number: KL07252
Replacement PET Tank for the 27L Tri-Conical FermZilla with tri-clamp bottom port. Perhaps your wort was too hot when you transferred from the kettle, or while cleaning you dropped the FermZilla against something sharp that punched a hole, or maybe it's just time to replace the tank after acquiring too many scratches from normal wear-and-tear. Whatever the reason, no need to go buy a whole new FermZilla! Just pick up one of these fresh replacement tanks and your conical fermenter will be good as new! Pressure Stress If you use the FermZilla to ferment under pressure, or you use CO2 to pressure transfer or force carbonate your finished beer, it is very important that you conduct semi-annual inspections of your tank. Even with perfect care, the FermZilla tank may show signs of wear from pressure stress over time. We recommend visually inspecting your tank for stress creases or other signs of wear once or twice a year. A hydro test should be conducted every two years, even if no signs of wear are found. The process is simple: Fill the tank to the brim with water Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher Pressurize the tank to 4 BAR (58 psi) Check for leaks, then replace the Red PRV when finished If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla. General Care Taking good care of your FermZilla begins with cleaning and sanitizing the unit before and after use. The tank is made from food-grade PET, which is beautifully clear, but can be sensitive to long soaks in cleaners and acid-based sanitizers. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank. KegLand Part Number: KL28240 NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.
Replaces the circular top inlet of the MaltZilla to allow for easier adding of grains. This product is still in development. Details will be added as they become available.
Hopper only. MaltZilla and Base Board sold separately.
Reusable T-Cork Plastic Stopper. Fits standard wine bottles. Can be inserted and removed by hand.
Dishwasher safe
Made from Food Grade materials
BPA free
Max temperature rating: 167°F (75°C)
Another great addition to your Ss Brewtech Chronical fermenter. This shelf adds stability to your Chronical, especially when using leg extensions, and gives you a handy place to set things like your blow off vessel.
NOT FOR LEGACY 7 GAL CHRONICAL - There are no threaded inserts in the leg bottoms for this to mount to on the 7 gal Legacy Chronical.
Features:
Made from 304 stainless steel
Great place to put your blow off vessel
Adds stability when using leg extensions
Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
WineStix are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These are Medium Plus toast North American Oak staves, and depending on the wine, will impart flavors of roasted coffee, spice, nutmeg, honey, light chocolate, and hints of leather. This is a two pack of WineStix, sized specifically for a 5-6 gallon carboy of wine. WineStix will easily fit through the mouth of a glass carboy, and can be attached to a string via the drilled hole for easy removal!
1" W x 8.5" Long
One carboy Winestix will treat 5-6 gallons of wine.
PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.
A perfect addition to your pilot distilling T-500 or Grainfather.
Make a London Dry style gin with the Gin Botanicals Kit and Botanical Basket. Simply make your spirit wash as normal, put your Botanicals Kit ingredients into the basket and screw the basket on to the Alembic Pot Still dome and condenser or T500 condenser (by removing the saddles) and run your spirit through.
You can also use the Botanicals Basket to infuse your spirit with other flavors e.g. citrus or elderflower for your own unique brand of spirit.
Anvil Brewing Equipment brew kettles are as durable as they get, with the 5.5 gal version fitting well on a stovetop and the larger versions sitting nicely on the Anvil high performance burner. This rugged kettle is constructed from high quality materials and is designed for a lifetime of demanding use.
Standard Features Include:
-Heavy 18 gauge 304 stainless steel with reinforced lip for durability and easy cleaning.
-Induction capable tri-ply clad bottom.
-Internal etched level graduations in gal and liters for accurate measurements
-A dual scale F/C thermometer – included standard!
-Solid cast stainless steel handles for comfort and durability – no rivets to leak or harbor contaminations!
-Lid conveniently rests on kettle handle
-Ideal 1.2 height to diameter ratio for optimum brewing performance
-Purpose built stainless steel ball valve with integral bulkhead seal is rock solid, easy to install and disassemble, and will never leak.
-Dip tube drains to within 3/8” of the bottom of the kettle.
Anvil Brewing Equipment provides everything you need in a brew kettle! But if you want more, add a boil kettle strainer for the ultimate in hop and trub filtration or convert your Anvil Brew Kettle to a mash tun with our optional perforated false bottom.
SKU
Size
Kettle ID (in.)
Height (in.)
BE340
5.5
12
11.625
BE341
7.5
12.75
14
BE342
10
13.75
16.75
BE343
15
16
19
BE344
20
17.75
21.25
Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.
What makes KOMOS Kegerators better than the rest?
Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits)
Serve ice cold beer even in the warmest environments thanks to highly-efficient refrigeration components
Stainless steel forward-sealing faucets offer a huge upgrade over common chrome plated brass taps
Choose from the classic stainless, stainless with black finish or the upgraded stainless flow control model
Faucets mount to a high-quality stainless steel tower, rather than a cheap chrome plated tower
Interior fan diverts cold air up into the tower to keep your beer lines cold and reduce foaming
EVABarrier double walled draft tubing protects your beer against oxidation
Duotight push-to-connect fittings make assembly a breeze
Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted
The KOMOS Kegerator offers a stunning set of features that clearly separate this unit as the most modern kegerator on the market. With more interior space than other models, the KOMOS Kegerator is designed to fit up to four 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. Whether you choose the single, double, triple, or quad tap configuration, you'll receive stainless steel forward-sealing faucets in either classic or flow control model. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Rather than a chrome plated tower, the NukaTap faucets are mounted to a stainless steel tower that remains cool before, during, and after each pour thanks to a tower fan diverter that recirculates cold air within the kegerator and blows it up into the tower to keep your beer lines cold and reduce foaming. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26–82°F, dual gas inlets at the back, aluminum internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator.
The most eye-catching difference between the KOMOS unit and other kegerators is definitely the capacity. This is the first kegerator we have offered that comes with a quadruple tap tower option, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. KOMOS positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs.
Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines.
Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines.
Extra Wide Temperature Range is Perfect for Homebrewers
The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice.
Forward-sealing Stainless Faucets and Towers
All KOMOS kegerators come with NukaTap stainless steel forward-sealing faucets and a stainless steel draft tower. While other kegerator brands include basic, chrome-plated faucets and ABS plastic draft towers to reduce cost, KOMOS includes these premium upgrades as standard.
Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Most other kegerators on the market will include the cheapest, rear-sealing chrome-plated beer faucets that you'd find at any dive bar. KOMOS kegerators include not only a faucet that features superior pour technology, but made from stainless steel which won't corrode over years of use.
Choose from the classic forward-sealing faucet, matte black finish faucet, or the upgraded flow control model that allows you to dial in the flow rate of the beverage you're dispensing. The flow control faucet is a great option for users that often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Instantly make adjustments as you pour to dial in the flow rate. This is also a super convenient feature for when you want to grab a quick growler on your way out. By dialing back the flow rate, you can gently fill your growler so CO2 stays in solution and your beer doesn't pour flat when it comes time to share.
Click here to learn more about the Classic, Black, and Flow Control faucet models.
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
KOMOS Regulator
The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line.
Added Features
One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China.
The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Best Value & Backed by MoreBeer!
We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus, you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it.
Feature Summary:
Stainless Steel Air Cooled Tower
NukaTap Stainless Steel Forward-Sealing Faucets
Choose faucet model and number of taps above
Duotight Fittings make connecting draft lines a breeze
Digital Thermostat with wide 26 - 82° F temp range.
Robust KOMOS Dual Gauge Regulator included
CO2 Tank holder mounts on back of kegerator (tank not included)
Efficient and powerful compressor
Stainless Steel Door
Countertop Style Drip Tray
Aluminum floor for additional keg support
Includes EVABarrier beer and gas tubing
Beverage line measures 4mm ID x 8mm OD
1 x 1.7m length of line per tap
Gas line measures 5mm ID x 8mm OD
1 x line of varying length depending on number of taps (2, 2.5, or 3m)
4 Tap model includes uncut rolls of bev & gas line
We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.)
Gas lines can be cut to whatever length best suits your needs
Duotight adapters for draft shank and regulator connections
Duotight tee fittings for splitting gas lines (2, 3, 4 tap only)
You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny
For ball lock and pin lock disconnects we recommend DUO106
For commercial sanke keg couplers we recommend DUO104
Available Kegerator covers and "off road" casters for moving over uneven terrain
Detailed instructions on assembly and use
Specifications:
23.75" wide
25" deep
31.5" with CO2 mount
32.5" Tall (fridge only)
35" with Caster wheels
48.75" with tower
51" with Casters and Tower
110 v - 60 hz
0.8 Amp draw
Optimal ambient temperature is 65°F – 80°F
CSA Certified
Internal Dimensions:
19.5" wide
17" deep
16" down the center where compressor sits
28.5" tall
What Fits:
5 Gal. Torpedo Keg - 3
5 Gal. Slimline Torpedo Keg - 4
6 Gal. Torpedo Keg - 3
5 Gal. Megamouth Torpedo Keg - 1
5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4
5.2 Gal. Oxebar PET Keg - 3
5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3
(1) 5.16 Gal. Sixth Barrel Keg + (1) 7.75 Gal. Slim Quarter Keg
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1
7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1
15.5 Gal. Half Barrel Keg (Full Size Keg) - 1
See below for the Kegerator Instruction Manual.
Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
Great for all beer styles but highly recommended for IPAs and other hop forward beers
Aroma Profile: Bubblegum, Citrus, Stone Fruit, Tropical, Woody
Alpha Acids: 18.0 – 25.0%
Cryo Hop® Hop Pellets
Higher AA and nearly twice the resin content of traditional T-90 hop pellets
Increase yield by reducing vegetal matter in your brewhouse and fermenter
Cryo Hops® provide brewers with the ability to get gigantic hop character while reducing astringent and unpleasant vegetal flavors. With a substantially higher oil and resin content, LupuLN2 powder offers up all the flavor and aroma of a heavily hopped beer, but with a significanly reduced grassy character. Additionally, the lower dosage rate of the concentrated powder reduces the volume of trub and therefore, kettle loss. Using Cryo Hops® you will net more beer that is clearer!
Typical usage of Cryo Hops® would be roughly 50% of pellets. LupuLN2 powder can be used in any application where traditional hop products are utilized, including: Bittering, Kettle, Whirlpool and even direct to the fermentor. It is suggested that you use Cryo Hops® as late additions, in the whirlpool or dry hop, as the volatile aromatic compounds will be driven off if added early in the boil.
Cryo Hops® are an innovative hop product that is made by separating the lupulin from the hop flower using cryogenic processing. The result is a product with twice the potency of T90 pellets, with reduced astringency and vegetative material.
Note: These hops come pelletized. The powder is compressed into pellet form to make handling easier.
Typical Hop Statistics:
Alpha Acids: 18.0 – 25.0%
Beta Acids: 5.0 – 8.0%
Total Oil: 3.0 – 6.0%
Ekuanot® is a registered trademark owned by Hop Breeding Company.
Cryo Hops® is a registered trademark owned by Yakima Chief Hops, LLC.
Counterflow design provides rapid, single-pass wort chilling Larger flow area minimizes hop clogs compared to plate chillers 9.5mm Duotight compatible inlet/outlets allow for quick and easy hose connections Durable PEX tubing resists high temperatures and pressures, extending the chiller's lifespan Tired of slow, inefficient wort chilling? Meet the Red Reaper Counterflow Chiller, your ultimate brewing ally. This isn't just another chiller; it's engineered for speed, durability, and hassle-free brewing. Unleash Rapid Cooling with Superior Design: Robust PEX/Copper Construction: Unlike standard clamped connections, the Red Reaper boasts PEX tubing swaged and soldered directly to the copper wort pipe. This innovative design guarantees a leak-proof, high-pressure connection, ensuring your cooling water stays where it belongs. Lightning-Fast Duotight Compatibility: Seamlessly connect your hoses and camlock fittings in seconds with the 9.5mm Duotight compatibility. Brew more, fuss less. Add the Duotight Push-In Thermowell Tee to add a thermometer to your wort out line. High-Efficiency Counterflow Design: Featuring an internal copper tube for wort circulation and an outer chamber for counterflowing cold water, the Red Reaper maximizes heat transfer for rapid chilling. Experience the power of single-pass cooling from boiling to pitching temperatures. Clog-Resistant Flow: Enjoy the benefits of a plate chiller's efficiency with a larger flow area that minimizes hop clogs. Built for Performance and Longevity: The Red Reaper utilizes the same pressure and temperature-resistant PEX hosing trusted in professional plumbing, offering exceptional flexibility and durability. We recommend recirculating your last 15 minutes of boil through the Red Reaper to sanitize it before chilling with cold water. Easy Cleaning and Maintenance: For optimal cleaning, circulate hot PBW for a minimum 5-minute contact time. Alternate flow direction for thorough cleaning, and rinse with water at the same temperature. Important Care Instructions: Avoid Sunlight: Prolonged exposure to sunlight can degrade the PEX tubing. No Acidic Cleaners: Do not store with StarSan or other acidic products, as they can damage the copper. What is PEX? PEX (cross-linked polyethylene) is a flexible, durable plastic tubing used as a reliable alternative to traditional copper or steel plumbing. Choose Your Fittings: The Red Reaper comes with bare, 3/8" barbs that you can simply clamp your tubing onto. However, we recommend using 9.5mm Duotight x 1/2" male thread adapters which will allow you to convert to your preferred fittings for the water and wort lines -- Camlock, Garden Hose, Tri-Clamp, Quick Disconnect (QD), etc. Specifications: 18.3 ft. Length 3/8" barb inlet/outlet 9.5mm Duotight compatible Rubber feet Hinged hanger (for BrewZilla handles) KegLand Part Number: KL3835
In with the good, out with the bad! Abstrax® Tropical Tapestry replicates the terpene profile found in Mosaic® hops while omitting undesirable compounds found in hop vegetal matter
Flavor/Aroma: Citrus, Pine, Floral
The perfect hop: Using hop and botanically-derived terpenes, Abstrax builds exact profiles to match the flavor and aroma of an exemplary lot of Mosaic® hops
Consistent results every time. Eliminates the variance of using hops that may differ by age, crop year, storage conditions, growing region, processing method or farm
Choose your own adventure—add as little or as much as you want. Dial in your hop character post fermentation
Boost your brew by turning it up to 11. IPA not jumping out of the glass? Dose and drop into an incredible olfactory experience instantly!
Tropical Tapestry | Compare to the flavor of Mosaic®
The tapestry of beautiful flavors in this varietal gives new meaning to the word “complex.” Tropical Tapestry displays the contrasting blend of citrus and soft florals with earthy pine for a flavor and aroma you’d recognize anywhere.
Optimized Hop Extracts
When you extract the oil from hops, no matter how good your extraction is, you’ll always wind up with certain undesirable plant compounds. Abstrax Omni Hop Profiles are true-to-type optimized hop extracts without any of the undesirable notes typically found in other dry-hop aroma oils.
The Power of Terpenes
Abstrax Omni Hop Profiles are created by using individual terpene isolates. Think of them like little building blocks. We assemble them together to create an exact profile of the original hop with ZERO undesirable compounds. The result is an extremely potent and accurate profile of the original hop utilizing the power of terpenes.
Extremely Concentrated
A little really goes a long way here. Omni Hop Profiles are made from the essential building blocks of flavor and aroma so they’re naturally potent.
Dosage
Use at a rate of 2.5 mL per 5-gallon batch. Add at any point on the cold side in your fermenter, keg, or bottling bucket. Or even add a drop or two to spike your finished beer in the glass.
Features:
100% efficient flavor/aroma transfer
Consistent from batch to batch
Increase in yield/profit 5-30%
Omni Hop Profiles will not affect IBU test results and they cannot cause lightstruck off-flavors
Zero Undesirable Plant Compounds
No Lipids
No Chlorophyll
Recommended storage: 40-90°F. Do not freeze.
Mosaic® is a registered trademark owned by Hop Breeding Company.
The pressurizable Flex Chamber Collection Jar can be used for removing trub, harvesting yeast, and many other tasks
Ball lock adapters can be attached to the threaded ports on either side, allowing you to connect oxygenation or carbonation stones
Works perfectly as a sight glass for monitoring fermentation activity
Comes standard with all BrewBuilt X3 Uni Conicals
With multiple Flex Chambers on hand, you can use one for harvesting/storing yeast and another for dry hopping
The pressurizable Flex Chamber Collection Jar attaches directly to the 3" butterfly dump valve on the X3 Uni Conical and can be used for removing trub, harvesting yeast, and many other tasks. Designed for the BrewBuilt X3, but compatible with any 3" T.C. dump valve. Since the chamber is made from clear Tritan, it works perfectly as a sight glass for monitoring fermentation activity. Ball lock adapters can be attached to the threaded ports on either side, allowing you to connect oxygenation or carbonation stones, or flush the Flex Chamber with CO2 and use it to inject hops or other ingredients into your conical.
The Flex Chamber is also fully compatible with the Gen 3.2 FermZilla Tri-Conical fermenters.
3" T.C. connection
3" tri-clamp, gasket and end cap included
28 mm PCO 1881 threaded side ports
20 fl oz volume
Chamber made from Tritan
Please note: Never remove the Flex Chamber while your conical is under pressure. Always release pressure before removing the Flex Chamber.
The quintessential wine bottle—Bordeaux bottles are the classic choice for Cabernet Sauvignon and Merlot
Originating from the Bordeaux region of France, this is the most popular wine bottle shape in the world
Champagne green glass color is often preferred for Riesling, Chardonnay, and Cabernet Sauvignon
Farro Glass offers a full lineup of the most essential and commonly used bottles in winemaking
The most popular wine bottle in the world. As the name suggests, the Bordeaux bottle (also known as a Claret bottle) originates from the Bordeaux region of France. Easily identified by its wide shoulders and straight body, this bottle style comes in a variety of colors and is suitable for a myriad of wine styles. Brown and dark green are commonly used for reds to protect them from light during long storage periods, while light green and flint are most often used only for white wines that will be consumed much sooner after bottling.
Volume: 750 mL
Style: Bordeaux / Claret
Use: Riesling, Chardonnay, Cabernet Sauvignon
Color: Champagne Green
Finish: Cork
Bottom: Punted
Case QTY: 12
Pallet QTY: 90 cases
Our Farro Glass Wine Bottles offers a full lineup of the most essential and commonly used bottles in winemaking. We scoured the world to find a bottle source that could provide a quality product consistently and at a fair price that we can pass on to our customers. If you've been searching for reasonably priced bottles that are reliably in stock, look no further.
Heavy-duty stainless steel lid can be used with a still top or steam condenser
Sight glass disc allows you to watch your boil without having to remove your still or condenser
Easily remove the disc during the hot break or to add hops or other boil additions
Molded grips for easier handling with the lid is still hot
Compatible with 65L BrewZillas and DigiBoils
If you're using an AlcoEngine Still Top or Steam Condenser set with your BrewZilla or DigiBoil, this heavy-duty stainless lid with sight glass is virtually a must-have. Whether distilling or brewing, keeping an eye on your boil will help you stop foaming or boil over issues before they happen. With the standard distillation lid, checking on your wash or wort means removing or tipping the apparatus over to get a peek inside the boiler, which can be a cumbersome (if not dangerous) part of your process. The PPSU sight glass disc can also be easily removed to add hops or other boil additions through the large 3" T.C. ferrule. (Use gloves, it will be hot!)
The 65L lid is designed to be extremely sturdy when using heavier stills and is made with a 4" T.C. ferrule top port. To pair the lid with an AlcoEngine Still Top or the BrewZilla Steam Condenser Set, you can use a 2" x 4" T.C. reducer. (The AlcoEngine Still Tops will also need this single sided bead seal for a secure tri-clamp connection.)
The sight glass disc is made from a special PPSU plastic—an excellent choice for components that are exposed to high temperatures (up to 392°F / 200°C) and corrosive media due to its exceptional chemical resistance, as well as being extremely impact resistant. KegLand decided to use this type of plastic because it also has superior thermal and mechanical properties with the added benefit of being transparent. Intricate parts can be injection molded that would have been near impossible to do with stainless steel or lab-grade glass.
Specs:
4" T.C. top ferrule port
3" T.C. sight glass ferrule
Lid handles with molded grips
Thicker silicone lid gasket for a tighter seal
Includes:
3" PPSU sight glass disc
3" tri-clamp
3" silicone tri-clamp gasket
Silicone lid gasket
KegLand Part Number: KL25829
A common ingredient found in the historical brewing herbal mixture called Gruit. Used before hops became the brewing spice of choice. 1/2 to 1 oz per 5 gallons is sufficient for bittering. Imparts a mellow sage-like aroma.
This Italian cork is a high quality colmated cork. These corks have the ageable lifespan of Natural Cork, but are closer to the price of an agglomerated or overrun cork.
Colmated corks are Natural Corks that were not quite flawless enough to make a grade, but are then filled in with agglomerated pieces, resulting in an ageable, but ecoonmical cork.
Please note: the product image is an example photo. The corks you receive may not perfectly match this photo. Updated images coming soon.
Experience the vibrant and fruit-forward profile of our Ethiopia Sidamo, Natural Processed green coffee beans. Grown in the renowned Sidamo region, these beans, naturally processed, offer an intensely sweet and complex cup with lush berry and winey notes.
Cupping Notes:
Flavor: Expect a bold and juicy profile with prominent notes of ripe blueberries, strawberries, and raspberries. A winey sweetness, reminiscent of red grape or plum, is complemented by hints of dark chocolate and a subtle spice.
Body: A medium to full-bodied texture with a syrupy, lingering mouthfeel.
Aroma: Intense aromas of ripe berries, dark chocolate, and a sweet, wine-like fragrance.
Origin: Sidamo, Ethiopia
Altitude: Typically 1500-2200 meters
Varietal: Heirloom Ethiopian varieties
Process: Natural Processed
Relieves pressure while filtering from one keg to another plus allowing reading the pressure in the receiving keg.
Notes: You need to wind/unwind the end of the valve to adjust the pressure. It sometimes comes threaded all the way on from the manufacturer occasionally. Wrap a towel around the end piece(about 1/4 in) and clamp down on it while twisting the wrench fitting on the bottom(closest end to the Gas In QD) to loosen it. Then finger tighten or loosen to desired pressure.
Enjoy a never-ending supply of soda water on tap with the Continuous Soda Carbonator Keg Lid. SodaStream units are great, but filling up those tiny 1L bottles is a pain, they're expensive to swap, and they run out quickly. Hook up your mains water supply to this Carbonator Keg Lid, compatible with any standard ball lock homebrew keg, and you'll never have to think about running out of sparkling water.
Setup:
Position the keg inside your fridge or kegerator (ideally below 40°F).
Attach your beverage draft line to the soda water out post.
Attach your gas line to the gas-in post.
Set your CO2 regulator to 30-50 psi, depending on how highly carbonated you like your soda water. We highly recommend using a check valve on your CO2 line.
On first use, purge the air from the headspace of the keg.
Connect the mains water to the water inlet post on the lid of the keg.
We recommend also using a check valve on your mains water line to prevent soda water from going back into your house mains. Depending on your mains water pressure, you may need to reduce it using the Duotight In-Line Regulator. For the Carbonator Keg Lid to work well, the mains water pressure should be 10-15 psi higher than your regulator set pressure (from Step 4).
That's it. This simple unit will give you continuous soda water connected to your mains water.
Please note: if you are using a CO2 regulator that uses a corny-style PRV, such as the KOMOS® regulator, you will need to swap out the standard Green PRV with the 0-100 psi Gray PRV so you can raise the pressure above 60 psi. Always check the pressure rating of your keg(s) before swapping the PRV.
KegLand Part Number: KL10955
Tired of fishing your picnic faucet out of the dirt or the bottom of your kegerator? This holder from Torpedo fits over most ball lock keg posts and holds your hand faucet in convenient, clean position. Made from stainless steel with the Torpedo Keg logo etched in.
Does not fit pin lock kegs.
Brewtools valves are used to customize the system. All the valves have a T-type ball, which makes it close only the port opposite of the handle direction.
All the ports on the valve are 34mm TC and they are made from high quality stainless steel (SS304).
Twin Disc corks are the "Goldilocks" between whole cork and agglomerated, offering quality at a good price
Whole cork ends ensure your wine and corkscrew are touching natural cork bark, leading to less cork shredding
Microaggolmerated core is TCA free and disc ends go through Genesis® treatment to remove volatile compounds that lead to cork taint
24mm X 44mm, #9 x 1.75" | Fits standard cork finish (neck) bottles
Recommended aging time: Up to 3 years
Molinas Cork has been sustainabily harvesting from the cork forests of Sardinia for over 100 years
Bark is aged an additional year prior to harvest, leading to less porous, higher quality cork
A quality agglomerated cork capped with natural cork on either end. This gives corkscrews a solid piece to grab and the wine is in contact with natural cork. These corks are recommended for wines aged less than 3 years. Not intended for hand corkers that don't compress the cork. 24mm X 44mm, #9 x 1.75". Fits standard cork finish (neck) bottles.
Italy produces more wine than any country in the world and Molinas is the largest Italian cork supplier with over 1 billion corks produced annually. Molinas Cork was started over 100 years ago by Pietro Molinas on the Italian island of Sardinia. Besides its beautiful beaches and designation as one of the world's five Blue Zones, Sardinia is known for its large, government protected Cork tree forests.
Today, the 4th generation of the Molinas family sustainably harvests cork from these protected trees. Compared to most cork available in the market, the bark is allowed to mature an additional year. This leads to a less porous, higher quality cork, and has less impact on the forest. Throughout the entire process from tree to finished cork, quality control is strictly monitored. MoreFlavor! is proud to represent Molinas Cork in the USA.
Sensory
Organoleptic test (Washer): ≤ 2%
2,4,6 – TCA*:< 1,5 ng/L
2,3,4,6 – TeCA*:< LD
PCA*:< LD
TBA*:< LD
(*) LD =Detection limit: 2,4,6 – TCA (0,3 ng/L); 2,3,4,6 – TeCA (1,0 ng/L);\ PCA (1,0 ng/L); TBA (0,3 ng/L)
Tolerances on Normal Dimensions:
Peroxides: <0.2 mg / cap
Resistance to boiling: Absence of disaggregation
Elastic recovery: > 92% (30 sec)
Height: Nom. Value +/- 0,4 mm
Diameter: Nom. Value +/- 0,3 mm
Humidity: Min: 3% Max :8%
Ovalization: ≤ 0,3 mm
Apparent volumetric mass: 275 +/- 35 Kg/m3
Body: Granina Size 0,5-1 mm
Washer: Natural Cork
Characteristics Physical / Chemical:
Resistance to boiling: Absence of disaggregation
Dust transfer: < 0,3 mg/cap
Rondelle removal: Absent
Finishing Treatments:
Agglomeration: Individually Moulded Body.
Steam treatment: microgranulate for the elimination of TCA and other volatile substances.
Washing: different types of washing.
Surface treatment: silicone lubricants.
Marking: in focus or in ink.
Packaging: as requested by the customer.
Silicone lubricant for food contact.
Upgrade your base X1 Uni conical with a neoprene jacket to help insulate your fermentation and maintain stable temperatures. This is the same jacket that is included with the X1 Uni+.
Not compatible with the X1 Uni Pro conical or X2 Uni conicals.
A malty beer with a firm bitterness, this style can be easily enhanced by cold aging for a month or two
Includes Perle and Mt. Hood hops
Estimated ABV: 5%
Estimated IBUs: 28
Makes 5 gallons of finished beer
German for "old ale", Altbiers are a German version of Brown Ale. A malty beer with a firm bitterness. This beer can be further enhanced by cold aging for a month or two. It is rare to find a good commercial example of Altbier in the U.S. The malt extract for this kit is made entirely from Pilsner Malt, giving it that classic European flavor.
Makes 5 gallons
Estimated Original Gravity:1.051-54
SRM (Color Range): 16
IBUs: 28
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Please Note: the recommended yeast found on your kit's included recipe sheet may not match the recommendations on this page. The correct yeast recommendations are found above, as well as the add-on drop down menu.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
This handy adapter fits on standard keg couplers with its Female Beer Thread (5/8" BSP) and allows a ball lock connection on the beer side of the coupler. Made from 304 stainless steel.
Kegland Part number: KL00840
Add a 1.5" TC flange to virtually any vessel! Weldless design Ideal for FTSs and Brew Bucket flat lid pressurized transfers Use with the Pressurized Transfer Fitting FE26 (as shown in pictures) 304 Stainless Construction High heat compatible silicone O-ring Requires TC Clamp and Gasket 42 mm carbide hole saw recommended for installation Please note this product only includes the three pieces displayed in the first photo.
Ss Brewtech took the features of pro brewing equipment and shrunk it down for the homebrewer with their new Brewmaster Edition Kettles. Built from high quality 304 stainless steel this kettle has it all. Rotatable racking arm and sight glass allow complete control of trub pick up. Also, the dish bottom and integrated fire box allow for faster boil times because of the increased surface area. All TC fittings are fully sanitary and the whirlpool coupler has a tangential inlet which provides a more effective whirlpool. The BME Kettle from Ss Brewing Technologies has a feature set unmatched in the homebrewing market.
Features:
Integrated 1/2" ball valve with sight glass
Tangential whirlpool inlet
Fully welded TC ports
Dished bottom for faster boil times
Rotatable racking arm
Etched volume markings
1.2 mm 304 SS Construction w/ 2 mm SS Base
12 Gallon Full Volume
13.8" Ø x 20" Height
Note: Not intended for use with induction burners!
Dry airlock with marble for variable capacity tanks. Features a threaded shaft, and a plastic backnut with gasket that screws onto the underside. The outside dimension of the threads is 1-13/16 inch, it will fit a hole from 1-13/16 in to 2-1/4 in wide. The inside measurement of the airlock is 1-1/2 inch.Includes a marble with allows the release of gasses, but will not allow air into the tank. The marble is the sealing device, no water or other valves are used. Features a tab with hole on the top so you can attach a rope for raising or lowering the VC lid.
Plastic funnel screen for use with 40 cm plastic funnels (BE479). Snaps into the specially designed groove in the base of the funnels to filter out solids and small particles. Fits Ferrari brand funnels. Not compatible with Vintage Shop brand funnels.
WineStix are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These are Light toast French Oak staves, and depending on the wine, will impart flavors of gentle spices, cloves, cinnamon, vanilla, along with some rounding and structuring of the wine. This is a two pack of WineStix, sized specifically for a 5-6 gallon carboy of wine. WineStix will easily fit through the mouth of a glass carboy, and can be attached to a string via the drilled hole for easy removal!
One carboy Winestix will treat 5-6 gallons of wine.
Easily identify gas and beverage lines with color-coded options—LightShield Black for beverages, Transparent Red for gas EVABarrier's double-walled design with a proprietary inner polymer significantly reduces oxidation and CO2 loss, keeping your beer fresher for longer The ultra-smooth, nearly impermeable inner surface of the tubing prevents bacteria and microbes from adhering, ensuring cleaner beer lines The stiff yet pliable EVA outer barrier makes the tubing kink-resistant and ideal for use with push-in fittings like Duotight and John Guest 4mm ID size is optimized for home draft systems with short 5-6 ft. draft lines Easily identify your gas and beverage lines with color-coded draft tubing. LightShield Black EVABarrier is recommended for beverage lines while using Transparent Red for your gas lines, saving you a headache when your draft lines inevitably get tangled up in your draft system. LightShield Black also works perfectly for hydroponic systems as it will block UV and discourage algae growth. If you're looking for a high-quality draft tubing to take your system into the 21st century, EVABarrier is the clear choice. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. The 4 mm (5/32") ID size is perfect for homebrew draft applications where only a short beer line is needed. We recommend using 5-6 ft. per line for adequate flow resistance. Outer Barrier The outer barrier is made from EVA material and provides a decent stiffness to the tubing while still remaining pliable. This not only makes EVABarrier extremely kink resistant, it also makes it the best tubing to be used with Duotight, John Guest, and other push-in fittings. Inner Barrier The inner barrier is made from a proprietary polymer that acts as an excellent gas barrier. You can rest assured that your beer will be better protected from oxygen exposure, as well as CO2 loss. Your beer will stay fresher for longer and not loose carbonation like with other draft line. With other beverage line, you may notice that beer sitting in the line for an extended period will start to taste flat and/or oxidized. EVA Barrier tubing is unquestionably better in this regard and you will notice a significantly improved freshness of your beer, especially if it's been sitting in the lines for a while. Due to the high density and smooth nature of the EVABarrier inner wall, the internal surface of the tubing is remarkably smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing. Just another way EVABarrier is looking out for you and your beer! Direct Connect to Ball Lock Kegs This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 4 mm (5/32") Outer Diameter - 8 mm (5/16") PVC, BPA , and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects. KegLand Part Number: KL42765
Remove the keg spear from your sanke kegs for cleaning and maintenance
For use with US-standard D-Style sanke kegs
Safe and easy hand operation
Easily and safely remove the valve and spear on American Sanke kegs with this Sanke Valve/Spear Removal Tool from MoreBeer!
This economical tool is available for a very competitive price when you order from MoreBeer!, and it is great for anyone who needs to remove their spear on a Sanke keg for cleaning or to repair damage.
Note that this tool only presses the spear down to relieve pressure on the retaining ring, you will have to remove the ring by hand.
High temp silicone grip provides a cool touch even with hot liquids!
Ribbed grips allow quick comfortable tool-free operation
Fits all male 1/2" NPT and BSP fittings
1/2" stainless steel barb tail
The KegLand Stainless Steel Quick Connectors come with a heavy-duty silicone grip guard allowing comfortable and quick tool-free operation.
These are ideal for the BrewZilla & DigiBoil ball valves, 25-Watt MKII Magnetic Drive Pump, or any 1/2" NPT or BSP connection.
Specs:
Stainless steel and silicone construction
Silicone O-ring seal is retained for perfect positioning but is easily cleaned or replaced
1/2" (13mm) stainless steel barb tail with 3/8" (10mm) ID bore
KegLand Part Number: KL31639
Maximize the purity of your distillate with high density spiral prismatic packing Prismatic spiral shape designed to maximize surface area One 500g bag is suitable for filling one 10" long 2" tri-clamp extension tube Take you distillation to the next level with super high density spiral prismatic packing. The packing maximizes the purity of the collected distillate from your reflux still, ensuring the best possible product is collected. The prismatic spiral shape is designed to maximize its surface area helping to separate out fractions in your reflux, resulting in a highly pure and neutral end product. It is not recommended for use with pot stills when producing flavored spirits. Standard spiral prismatic packing is recommended for home-sized columns like the AlcoEngine series. Large size packing is recommended for 4" diameter or larger columns. Note: We recommend soaking and washing the SPP before its first use with a 50:50 mix of vinegar or citric acid and warm to hot water to remove all manufacturing oils. Sizing: The SPP is approximately 3.35mm x 3.45mm. Suitable to fill a 10” x 2” T.C. Extension Tube. One 500g bag of SPP is enough to fill approximately 500 mL (16.9 oz) of volume. The HETP (Height Equivalent to a Theoretical Plate) for this packing is approximately 30mm. That is roughly 33 theoretical plates per meter. KegLand Part Number: KL25706
This 4-position manifold is generally used in professional applications for keg filling and wort distribution. Made from high-quality stainless steel with 1.5" T.C. connections.
1.5" tri-clamp
22" long x 3.75" tall
Made from 304 stainless steel
ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
If you prefer a hoppy beer, you’re likely concerned with keeping the hops in your boil kettle and out of your fermenter during your home brewing. The Blichmann Hop Blocker is a handy brewing accessory that promises to keep those hops out of the fermenter and securely in the boil kettle, all without disrupting the rest of the brewing process.
Through rigorous and repetitive testing, Blichmann Engineering has determined that the 90 percent to 95 percent of the hop material is left behind when using the Blichmann Hop Blocker to transfer your brew to the fermenter. While many traditional screen filters draw from the bottom of the kettle and often plug the screen, the Hop Blocker drains the majority of the wort from the top down, enabling the hops and trub to settle undisturbed at the bottom of the kettle. The filter works on just a small portion of the wort instead of the entire thing, making it much less disruptive.
The Blichmann Hop Blocker is designed for use with pellet hops only, not with whole, loose hops, as those could clog the Hop Blocker.
These PVC heat shrink capsules help to make your home made wine look classy and professional. The look is the closest we have seen to commercially used tin capsules, which must be spun on with a $2,000 machine. Conversely, these PVC capsules can be easily used at home. Features horizontal tear tab.
To use, slide on to top of wine bottle and dip into hot water for a quick and even shrink. Or for faster processing with a more reliable finish try one of our Heat Shrink tools. 2 1/4" Height x 1 1/4" Diameter.
Use this specially made carboy bag to protect yourself and your beer! Carboys can be slippery, especially when wet. Our strong canvas bag allows you to more safely carry a carboy. If it is accidentally dropped the canvas will help contain the broken glass and reduce personal injury. Your beer also benefits as it is protected from light. UV Light interacts with compounds in hops to create skunky off flavor (editor note... I may not be a smart man but I do know skunky flavors in beer aren't good).
These are made in the USA from heavy black canvas with strong nylon webbing that is stitched (very strong) to support the carboy when lifting. In the summer, you can help reduce high fermentation temps by placing frozen ice packs in between the canvas and the carboy.
Want to make the perfect Black and Tan but don't want to bend a spoon? The Lagerhead is your answer. A formed piece of stainless steel shaped like a snapping turtle, the Lagerhead fits over the rim of the glass. Your nitrogenated stout is then poured over the "shell" of the turtle, creating the perfect Black and Tan. The "mouth" of the unit doubles as a bottle opener. You can also create other drinks with different beverages - try a "Snapper", Murphy's Irish Stout and Redhook ESB, or a "Snakebite", Guinness and hard cider. How about a "Bohemian", Pilsner Urquell and Beamish. A portion of the sale of this item goes toward turtle habitat conservation and restoration.
This 50 mL glass graduated cylinder is lab grade, and allows you to measure and dilute liquids with accuracy and ease! These class-A, lab quality graduates are designed to deliver accurate measurements while remaining resistant to breakage and a wide range of chemicals. Includes a plastic volume marker. Suitable for all general lab work.
This cylinder is approximately 8.5" tall.
Optimized Malt Balance: Utilizes a chloride-forward mineral blend to amplify caramel richness and "round" mouthfeel in red and amber ales, paired with a precise sulfate touch for a crisp, clean finish.
Instant Precision: Effortlessly transforms RO or distilled water into a reliable, repeatable brewing base.
Optimized Chemistry: Precisely balances mash pH and mineral content to unlock your beer's full flavor potential.
Expertly Formulated: Developed with brewing authority Colin Kaminski for style-accurate chemistry and optimal mash pH.
All-Grain Optimized: Engineered specifically for all-grain mashing to maximize enzymatic activity and mash efficiency. Instant Water™ is not recommended for extract brewing.
Built for balance, this profile brings out caramel richness and subtle hop interplay in red and amber ales. Its chloride-forward mineral blend enhances mouthfeel and malt roundness, while just enough sulfate keeps the finish clean and dry.
Elevate your home brewing with the CellarScience Instant Water™ Salt Pack — designed in collaboration with Colin Kaminski, co-author of Water: A Comprehensive Guide for Brewers. Each expertly crafted blend of essential salts and minerals transforms reverse osmosis (RO), deionized (DI), or distilled water into an ideal base for brewing.
Every formulation is precisely balanced to optimize water chemistry for its intended beer style, helping your brew reach its full flavor potential with style-accurate mineral content and optimized mash pH. Engineered for precision and ease of use, CellarScience Instant Water™ Salt Packs simplify the complex process of water adjustment, providing a reliable and repeatable solution.
Importance of Mash pH
Proper mash pH is critical to brewing performance and finished beer quality. CellarScience Instant Water™ formulations are designed to place mash pH into the optimal range for each beer style.
Improves brewhouse efficiency by supporting optimal enzyme activity during starch conversion
Shapes hop flavor and balance by influencing bitterness, smoothness, and aroma expression
Enhances clarity and stability through improved protein coagulation and yeast performance
With properly conditioned water, you’ll unlock better fermentation, enhanced enzyme activity, and a cleaner, more expressive finish that allows your beer’s true character to shine.
Designed to work with: Reverse osmosis (RO), deionized (DI), or distilled water
Each pack treats: 6 gallons (23 L) of brewing water
For larger batches, add an additional 2 g per gallon
Instructions
Use only with reverse osmosis (RO), deionized (DI), or distilled water.
Add the full contents of this pack to 6 gallons (23 L) of brewing water before mashing. Stir until dissolved.
Mash in as usual — no additional acid or salt adjustments are typically required.
Proceed with your normal brewing process.
Note: These salts are designed to set mash pH without acid additions. Because malt acidity varies, you may wish to verify your mash pH and make small corrections if needed, though this is rarely necessary. Dextrose is used in trace amounts as a processing aid for blend consistency and flow and does not affect fermentation or flavor.
Clean multiple beverage draft lines in a single loop using this Ball Lock Keg Jumper Post. Makes cleaning your kegerator or keezer a breeze without the need to remove your quick disconnects. This double ended keg post does not have a spring & poppet. It just has a piece of bar that activates the ball lock disconnect wide open.
Please note it is a single piece that cannot be undone from the middle.
KegLand Part Number: KL20152
