Replaces the oversized airlock that comes with our Speidel plastic tanks.
Does Not include the stopper shown in the photo.
Height 5 3/8". Outer diameter 2 7/8". Stem outer diameter 23/32". Stem inner diameter 9/16".
Replacement Ball Valve for the Gen 3 BrewZilla / DigiBoil. Silicone washer and stainless nut included, but not pictured.
Not compatible with BrewZilla Gen 4.
1/2" MPT
13.5 mm barb (apprx. 1/2")
304 stainless steel construction
KegLand Part Number: KL03728
Replacement Base Gasket for Sight Gauge. Compatible with sight gauges MT510, MT520, MT530, and weldless sight gauges WL316, WL321, WL326.
Gasket only. Does not include base cap.
Replacement lever collar for Intertap or NukaTap faucets. This beer faucet part threads onto the lever and sits above the friction bonnet. Used to help adjust your tap handle to face forward if it is oriented at an angle when fully threaded onto the faucet lever.
Replacement roller mount for the Semi-Automatic Label Applicator Machine. This roller mount attaches on the exterior of the labeling machine. For the interior roller mount, see here. KegLand Part Number: KL88925
Replacement roller mount for the Semi-Automatic Label Applicator Machine. This roller mount attaches on the interior of the labeling machine. For the exterior roller mount, see here. KegLand Part Number: KL88925
Replacement bladder for the 300L & 450L Marchisio Bladder Presses (WE170/WE175).
Please note: the color of the bladder may differ from what's pictured.
Replacement bladder for Speidel Bladder Press.
20L -- GER101S
40L -- GER102S
90L -- GER104 / GER104S
180L -- GER106
Please Note: The bladder may arrive covered in white dust from the manufacturing process. This is normal and does not indicate the bladder was used. Simply wash the bladder with water to remove the dust before first use.
This product was specifically developed to be used only as intended by the manufacturer and we cannot advise its use in any other application as it may cause damage or harm.
Replacement Blade for Speidel Motorized Apple & Pear Crusher (WE208) Please note: this is a single blade. Please update your order quantity to the number of replacement blades you require.
Bleeder/Regulator valve from the WE399 kit. Sold individually for those who need a replacement part or are planning to build their own version of our WE399 kit.
Note: The inlet is noted with a molded text "CO2" next to the barb fitting.
Relevant Specifications
Max Inlet Pressure: 10 psi
Inlet/Outlet Size: 3/8 in
Construction Material: Food Grade rubber and plastic.
This false bottom is specifically designed for the Gen 4 35L BrewZilla. On this model the ball valve tap was relocated underneath the unit, allowing for a super low profile false bottom that molds itself to the concave bottom of the BrewZilla. This also allowed for a larger malt pipe for bigger grain bills and provides a filter for protecting the easy access pump.
It is not suitable for DigiBoils or Gen 3.1.1 or older BrewZillas, as those models do not have a concave bottom.
Includes 2x Eye Bolt Assemblies.
KegLand Part Number: KL27304
This false bottom is specifically designed for the Gen 4 65L BrewZilla. On this model the ball valve tap was relocated underneath the unit, allowing for a super low profile false bottom that molds itself to the concave bottom of the BrewZilla. This also allowed for a larger malt pipe for bigger grain bills and provides a filter for protecting the easy access pump.
It is not suitable for DigiBoils or Gen 3.1.1 or older BrewZillas, as those models do not have a concave bottom.
Please Note: These are slightly looser in fit for ease of use. These only come with one eyebolt as the spec change means that the additional eyebolt is no longer required.
KegLand Part Number: KL27311
Replacement false bottom for the 35L Gen 4 BrewZilla. Includes eye bolt pull-ring assembly.
Not compatible with older models of BrewZilla or the DigiBoil.
KegLand Part Number: KL27304
Replaces entire bottom valve assembly on the 180L Speidel bladder presses. Includes connection for hose inlet, drain valve and safety blow-off valve on a brass tree.
Replaces entire bottom valve assembly on the 40L Speidel bladder presses. Includes connection for hose inlet, drain valve and safety blow-off valve on a brass tree.
Replaces entire bottom valve assembly on the 90L Speidel bladder presses. Includes connection for hose inlet, drain valve and safety blow-off valve on a brass tree.
Replacement Cap Gasket for Sight Gauge. Compatible with sight gauges MT510, MT520, MT530, and weldless sight gauges WL316, WL321, WL326.
Gasket only. Does not include end cap.
Replacement carbon filter for the BrewRO System. The carbon filter should be changed every 6 to 12 months.
Only use HbrewO replacement filters on your BrewRO System, failure to do so can damage the system.
Replacement deionization filter for the BrewRO System. The deionization filter should be changed every 6 months.
Only use HbrewO replacement filters on your BrewRO System, failure to do so can damage the system.
Dry airlock with marble for variable capacity tanks. Features a threaded shaft, and a plastic backnut with gasket that screws onto the underside. The outside dimension of the threads is 1-13/16 inch, it will fit a hole from 1-13/16 in to 2-1/4 in wide. The inside measurement of the airlock is 1-1/2 inch.Includes a marble with allows the release of gasses, but will not allow air into the tank. The marble is the sealing device, no water or other valves are used. Features a tab with hole on the top so you can attach a rope for raising or lowering the VC lid.
Double Junction, refillable glass electrode with BNC connector and 1m cable. Replacement for the electrode that is included with the Milwaukee MW151 MAX pH/ORP/Temp Logging Bench Meter. The electrode is the consumable portion of the pH meter which actually makes the measurement. All pH electrodes wear out over time and must be replaced. If your meter is having trouble calibrating or the reading drifts then a bad electrode is the likely culprit.
Milwaukee Part Number: MA917B/1
A replacement electrode for the MT608 & MT609 pH meter. The electrode is the consumable portion of the pH meter which actually makes the measurement. All pH electrodes wear out over time and must be replaced. If your meter is having trouble calibrating or the reading drifts then a bad electrode is the likely culprit. Download the PDF Milwaukee Part Number: SE220
Replacement (wine-in, wine-out) end plate for the Buon Vino Super Jet Filter.
If you love the brilliance you get when you filter with the Buon Vino Super Jet Filter you’ll be thrilled to know that you can get replacements parts for maintenance and repair! This is a replacement end-plate for the Buon Vino Super Jet filter. It features a one-sided filter plate with nozzles for wine in and wine out, and a threaded hole for the pressure gauge.
Replacement (pyramid) end plate for the Buon Vino Super Jet Filter.
If you love the brilliance you get when you filter with the Buon Vino Super Jet Filter you’ll be thrilled to know that you can get replacements parts for maintenance and repair! This is a replacement end-plate for the Buon Vino Super Jet filter. It features a one-sided filter plate with a pyramid shaped back for use with the metal plate on the filter.
The redesigned quick disconnect pre-filter for the H308 Super Transfer pump now features a replaceable filter screen. Pick up a replacement or keep a spare on hand. When your filter mesh screen is past its prime, simply replace the screen rather than replace the whole pre-filter. Please note: this filter screen will only work with the current generation pre-filter. If you purchased the Super Transfer pump before 2020 and have the original pre-filter, you will need to upgrade to the newest version (H308C) to be compatible with this replacement mesh screen.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. This item will automatically ship when the manufacturer has more inventory in late January
The filters on the BrewRO System will be due for a filter change every 6 to 12 months depending on usage. Thanks to the quick connect fittings, swapping out the filters is a painless process. This set comes with the 3 filters (2 carbon, 1 DI) used in the City Water configuration of the BrewRO System.
Carbon Filters: Replace every 6 - 12 months
Deionization Filter Media: Replace every 6 months
Tip: Use the Inline TDS Monitor (FIL102) to measure the total dissolved solids coming out of your BrewRO System and be certain of when it's time to change your filters.
Please note: this filter set is intended for the "City Water Configuration" as it includes two carbon filters and no sediment filter. For the well water filter set, see FIL104A.
Only use HbrewO replacement filters on your BrewRO System, failure to do so can damage the system.
The filters on the BrewRO System will be due for a filter change every 6 to 12 months depending on usage. Thanks to the quick connect fittings, swapping out the filters is a painless process. This set comes with all 3 filters used in the Well Water configuration of the BrewRO System.
Sediment Filter: Replace every 6 - 12 months
Carbon Filter: Replace every 6 - 12 months
Deionization Filter Media: Replace every 6 months
Tip: Use the Inline TDS Monitor (FIL102) to measure the total dissolved solids coming out of your BrewRO System and be certain of when it's time to change your filters.
Please note: this filter set is intended for the "Well Water Configuration" as it includes the sediment filter and one carbon filter. The "City Water Configuration" uses two carbon filters and does not use the sediment filter.
Only use HbrewO replacement filters on your BrewRO System, failure to do so can damage the system.
