Products
-
CMBecker Ball Lock Quick Disconnect (QD) | Gas In | Barbed | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
The highest quality plastic ball lock quick disconnect available to homebrewers Smooth operation—clicks into place on keg posts and is easily removed 1/4" barb for 1/4" or 3/16" ID draft line CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Gray plastic clearly identifies the disconnect as the gas in QD This is a high quality plastic quick disconnect made by CM Becker for your gas line. Barb is 1/4". 1/4" or 3/16" beverage tubing is recommended for gas line. Note: Sometiems ball lock fittings can be difficult to get fully seated on a Cornelius keg. We recommend using a quick spray of sanitizer solution to act as a lubricant and giving it a few twists while applying the ball lock.
$7.29
-
CMBecker Ball Lock Quick Disconnect (QD) | Gas In | Flared | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
The highest quality plastic ball lock quick disconnect available to homebrewers Smooth operation—clicks into place on keg posts and is easily removed Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Gray plastic clearly identifies the disconnect as the gas in QD This white, beverage out quick disconnect comes with a barb for attaching to a gas line, and it's made by CM Becker so you know it is high quality. 1/4" flare connection. Note: Sometiems ball lock fittings can be difficult to get fully seated on a Cornelius keg. We recommend using a quick spray of sanitizer solution to act as a lubricant and giving it a few twists while applying the ball lock.
$7.29
-
CMBecker Draft Shank | Chrome Exterior w/ Food Grade Liner | 2.5"
This is a proprietary draft shank only intended for use with CM Becker X1 and V10 flow control faucets. It will not work with generic or other brands of faucets.
$32.99
-
CMBecker Draft Shank | Stainless Steel | 2.5"
This is a proprietary draft shank only intended for use with CM Becker X1 and V10 flow control faucets. It will not work with generic or other brands of faucets.
$37.99
-
CMBecker Draft Shank | Stainless Steel | 5-3/8"
This is a proprietary draft shank only intended for use with CM Becker X1 and V10 flow control faucets. It will not work with generic or other brands of faucets.
$38.99
-
CMBecker Faucet | V10 | Allen Security Adjustment | Creamer | 304 SS Brushed
The V10 stainless steel flow control faucet is designed and produced in Germany with some assembly completed in the United States. This faucet contains technology such as the "Closed Piston Chamber with Encapsulated Compression Spring" that allows for a perfect forward seal on the faucet, no beer trapped in dead space to cause the lever to stick, and the ability to push the faucet backwards for an extra creamy head. The compensator itself has an extra long cone for a wider range of compensation and designed to eliminate uncontrolled shifting of the compensator cone. This configuration features a black standard faucet knob, a polished stainless steel faucet lever, and a lever flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in “Creamer” function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.
$89.99
-
CMBecker Faucet | V10 | Allen Security Adjustment | Creamer | 304 SS Polished
The V10 stainless steel flow control faucet is designed and produced in Germany with some assembly completed in the United States. This faucet contains technology such as the "Closed Piston Chamber with Encapsulated Compression Spring" that allows for a perfect forward seal on the faucet, no beer trapped in dead space to cause the lever to stick, and the ability to push the faucet backwards for an extra creamy head. The compensator itself has an extra long cone for a wider range of compensation and designed to eliminate uncontrolled shifting of the compensator cone. This configuration features a black standard faucet knob, a polished stainless steel faucet lever, and a lever flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in “Creamer” function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.
$89.99
-
CMBecker Faucet | V10 | Lever Adjustment | Creamer | 304 SS Brushed
The V10 stainless steel flow control faucet is designed and produced in Germany with some assembly completed in the United States. This faucet contains technology such as the "Closed Piston Chamber with Encapsulated Compression Spring" that allows for a perfect forward seal on the faucet, no beer trapped in dead space to cause the lever to stick, and the ability to push the faucet backwards for an extra creamy head. The compensator itself has an extra long cone for a wider range of compensation and designed to eliminate uncontrolled shifting of the compensator cone. This configuration features a black standard faucet knob, a polished stainless steel faucet lever, and a lever flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in “Creamer” function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.
$89.99
-
CMBecker Faucet | V10 | Lever Adjustment | Creamer | 304 SS Polished
The V10 stainless steel flow control faucet is designed and produced in Germany with some assembly completed in the United States. This faucet contains technology such as the "Closed Piston Chamber with Encapsulated Compression Spring" that allows for a perfect forward seal on the faucet, no beer trapped in dead space to cause the lever to stick, and the ability to push the faucet backwards for an extra creamy head. The compensator itself has an extra long cone for a wider range of compensation and designed to eliminate uncontrolled shifting of the compensator cone. This configuration features a black standard faucet knob, a polished stainless steel faucet lever, and a lever flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in “Creamer” function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.
$104.99
-
CMBecker Faucet | V20 Forward Seal | Creamer | 304 SS
An amazing Curved Forward Sealing Creamer Faucet from CMBecker! This heavy duty, yet sophisticated, faucet looks great with its unique stainless steel bent tube spout. Made in Germany and assembled in the United States. Engineered to be full of technological advantages to help you pour the perfect beer using the most sanitary system in the industry. Please note: the faucet handle and draft shank in the example photo are not included. Forward seal for better sanitation and operation 304 Stainless Steel construction for longer life and no “leaching” of materials Features a built in “Creamer” function so you can put a fine cream head on your beer Closed Piston chamber with encapsulated compression sprin
$79.99
-
CMBecker Faucet | V3S Forward Seal | Creamer | 304 SS
It is time to move forward with the technologically advanced, forward seal faucet from CMB, the V3S. This faucet is very compact, beautifully finished and full of technological advantages to help you pour the perfect beer. The sleek European design complements the look of your beer system. Please note: the faucet handle in the example photo is not included. Forward Seal for better sanitation and operation. Made in Germany and assembled in the USA! Features a built in “Creamer” function so you can put a fine cream head on your beer Creamer also works well for coffee beverages where a creamy texture is desired. 304 Stainless Steel construction will not affect the flavor of beer, wine and other beverage Works well for Beer, Wine and other acidic beverages. Vents at the top for better sanitation Closed Piston chamber with encapsulated compression spring, This gives you Consistent pressure between forward seal o-ring and seating area Eliminates dripping and leaking issues found in some forward seal designs Extends the life of the sealing O-ring for years of service between replacements No beer is trapped in system or exposed to air, which provides more sanitary conditions.
$49.99
-
CMBecker Faucet | V3S Forward Seal | Creamer | 304 Stainless Steel | Bowed Nozzle
It is time to move forward with the technologically advanced, forward seal faucet from CMB, the V3S. This faucet is very compact, beautifully finished and full of technological advantages to help you pour the perfect beer. The sleek European design complements the look of your beer system. Please note: the faucet handle in the example photo is not included. Forward Seal for better sanitation and operation. Made in Germany and assembled in the USA! Features a built in “Creamer” function so you can put a fine cream head on your beer Creamer also works well for coffee beverages where a creamy texture is desired. 304 Stainless Steel construction will not affect the flavor of beer, wine and other beverage Works well for Beer, Wine and other acidic beverages. Vents at the top for better sanitation Closed Piston chamber with encapsulated compression spring, This gives you Consistent pressure between forward seal o-ring and seating area Eliminates dripping and leaking issues found in some forward seal designs Extends the life of the sealing O-ring for years of service between replacements No beer is trapped in system or exposed to air, which provides more sanitary conditions.
$85.99
-
CMBecker Faucet | X1 Self Closing | Allen Key Security Adjustment | Creamer | Polished Stainless Steel
The X1 Faucet has been used for many beverage dispense applications over the years including beer, soda, carbonated water and other beverages. This faucet is a great choice when you need to dispense very cold beer that might freeze a metal faucet. This configuration features a self-closing faucet lever, and an Allen Key Security flow control adjustment system. Please note: the faucet handle and draft shank in the example photo are not included. Self-Closing, Allen Key Security Adjustment Food Grade (NSF Approved) plastic and stainless steel Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in "Creamer" function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad
$49.99
-
CMBecker Faucet | X1 Self Closing | Lever Adjusted | Creamer | Black
The X1 Faucet has been used for many beverage dispense applications over the years including beer, soda, carbonated water and other beverages. This faucet is a great choice when you need to dispense very cold beer that might freeze a metal faucet. This configuration features a self-closing faucet lever, and a lever flow control adjustment system. Please note: the faucet handle and draft shank in the example photo are not included. Self-Closing, Lever Adjustment Food Grade (NSF Approved) plastic and stainless steel Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in "Creamer" function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad
$54.99
-
CMBecker Faucet | X1 Standard | Allen Key Security Adjustment | Creamer | Polished Stainless Steel
The X1 Faucet has been used for many beverage dispense applications over the years including beer, soda, carbonated water and other beverages. This faucet is a great choice when you need to dispense very cold beer that might freeze a metal faucet. This configuration features a standard faucet lever, and an Allen Key Security flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Allen Key Security Adjustment Food Grade (NSF Approved) plastic and stainless steel Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in "Creamer" function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.
$49.99
-
CMBecker Faucet | X1 Standard | Lever Adjusted | Creamer | Black
The X1 Faucet has been used for many beverage dispense applications over the years including beer, soda, carbonated water and other beverages. This faucet is a great choice when you need to dispense very cold beer that might freeze a metal faucet. This configuration features a standard faucet lever, and a lever flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Lever Adjustment Food Grade (NSF Approved) plastic and stainless steel Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in "Creamer" function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.
$57.99
-
CMBecker Faucet | X2 Wine | Long Nozzle | Black
This black plastic faucet is made in Germany and assembled in the United States. It is a very durable faucet made of the same food grade plastics as the CMB Disconnects. It features a stainless steel lever that will hold up to commercial handles. Black plastic body features a durable stainless steel lever Plastic spring-loaded shaft and chrome-plated brass bonnet and collar Standard threading is compatible with most branded tap handles Easy to clean design. Disassembles in seconds. Features food grade plastics for sanitary use with all beverages. Spout is removable and can be replaced with shorter spout for beer Used in commercial applications, bars and restaurants all over the world!
$31.99
-
CMBecker Faucet | X2 Wine | Long Nozzle | Burgundy
This plastic faucet with a burgundy finish is made in Germany and assembled in the United States. It is a very durable faucet made of the same food grade plastics as the CMB Disconnects. It features a stainless steel lever that will hold up to commercial handles. Burgundy plastic body features a durable stainless steel lever Plastic spring-loaded shaft and chrome-plated brass bonnet and collar Standard threading is compatible with most branded tap handles Easy to clean design. Disassembles in seconds. Features food grade plastics for sanitary use with all beverages. Spout is removable and can be replaced with shorter spout for beer Used in commercial applications, bars and restaurants all over the world!
$31.99
-
CMBecker Faucet | X2 | Short Nozzle | NSF Rated | with Creamer | Black
This faucet is made in Germany and assembled in the United States. It is a very durable faucet made of the same food grade plastics as the CMB Disconnects. It features a stainless steel lever that will hold up to commercial handles. The creamer faucet lets you top a glass of beer with a perfect head for a great-looking presentation. Simply pull the lever forward to pour; then push it back to finish with a creamy head. Black plastic body features a durable stainless steel lever Plastic spring-loaded shaft and chrome-plated brass bonnet and collar Standard threading is compatible with most branded tap handles Features a "Creamer" action when handled is pushed back. Emulates the fine foam of a stout faucet. Easy to clean design. Disassembles in seconds. Features food grade plastics for sanitary use with all beverages. Spout is removable and can be replaced with longer spout for wine. This faucet can be used interchangeably for beer or wine. Used in commercial applications, bars and restaurants all over the world!
$42.99
-
CMBecker In-Line Flow Control Compensator
Add the perfect amount of restriction to any beer line to reduce foam. Eliminates the need for flow control in the faucet itself. Great for use in Jockey Boxes or anywhere you are serving beverages with varying levels of carbonation. If you are currently using a long length of tubing to increase restriction you can now shorten your tubing. A shorter line holds less beer. Beer that is stored in the line tends to warm up quicker, adding to foaming issues, and is more likely to stale from bacteria present in the line. Features: Adjust flow with an included Allen wrench (keeps unauthorized people from adjusting the unit) Eliminate foam from beer or slow down / speed up other beverages Fix systems with issues without having to replace lines or faucets Take the guesswork out of line restriction. You can use shorter lines and still have perfect restriction. You can also use larger ID lines and adjust as necessary. Easy to disassemble for cleaning, clear body for easy monitoring Made in Germany by CM Becker from Food grade plastic and stainless steel parts! Comes Equipped with 2 x 3/16" Barbs Easy to install to any existing beer line (cut line and install two clamps)
$54.99
-
CMBecker Inline Check Valve | Quick Disconnect (QD) | Flared
1/4" flared inline check valve can be used with any flare threaded ball lock or pin lock quick disconnect Allows gas to flow out, but won't allow backflow of liquid into your gas system Ideal safety measure if you force carbonate your beer using the bev out dip tube Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs (male flare threaded side only) CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Add this inline check valve to any flared gas-in disconnect and protect your draft system! The check valve allows gas to flow out, but won't allow backflow of liquid into your gas system. Many manifolds and regulators already feature check valves, but this disconnect will keep liquid from ever entering your gas lines in the first place. Especially handy if you force carbonate your beer using the bev out dip tube! Why we love it: Because we've had beer shoot back into our gas line and that sucks. At some point you will have a keg that is pressurized more than the pressure in your gas system. This could be caused by different carbonation levels, a keg sitting at room temperature, etc. So for example if the pressure in your keg is at 20 psi and your regulator is set at 12 psi, when you connect your gas in quick-disconnect liquid shoots from the keg into the gas line. Eliminate that possibility with this ingenious fitting. If you're looking for a ball lock disconnect with a built-in check valve, we highly recommend KEG729. However, the beauty of this inline check valve is that it can be used with any flared disconnect, including pin locks. If you don't want to part with your high-quality stainless steel disconnects, this inline check valve is for you!
$9.99
-
CMBecker Pin Lock Quick Disconnect (QD) | Beverage Out | Barbed | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
The highest quality plastic pin lock quick disconnect available to homebrewers Twist-to-connect style pin lock QD for pin lock style corny kegs 1/4" barb for 1/4" or 3/16" ID draft line CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Black plastic clearly identifies the disconnect as the liquid out QD This is a high quality pin lock fitting made by CM Becker in Germany. Pin lock plastic quick disconnects for Cornelius style homebrew kegs. These quick connect fittings will connect to the beverage out body connect on your pin lock kegs. Barbed fittings for are the most popular style, they make it simple to connect keg tubing directly to the barb. Threaded flare fittings are also available.
$7.99
-
CMBecker Pin Lock Quick Disconnect (QD) | Beverage Out | Flared | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
The highest quality plastic ball lock quick disconnect available to homebrewers Twist-to-connect style pin lock QD for pin lock style corny kegs Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Black plastic clearly identifies the disconnect as the liquid out QD Plastic quick disconnects for pin lock Cornelius-type kegs. This is a high quality fitting made by CM Becker in Germany. Red and black quick disconnects are used for the liquid out tank plug. 1/4" male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.
$7.99
-
CMBecker Pin Lock Quick Disconnect (QD) | Gas In | Barbed | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
The highest quality plastic ball lock quick disconnect available to homebrewers Twist-to-connect style pin lock QD for pin lock style corny kegs 1/4" barb for 1/4" or 3/16" ID draft line CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Gray plastic clearly identifies the disconnect as the gas in QD This is a high quality fitting made by CM Becker in Germany. Pin Lock Gas-In quick-disconnect is fitted with a barbed end for easy attachment of your gas line. Gray top and base denote that this unit is used on gas side. 2 pin. 1/4'' barb fitting for easy attachment of gas line.
$7.99
-
CMBecker Pin Lock Quick Disconnect (QD) | Gas In | Flared | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
The highest quality plastic ball lock quick disconnect available to homebrewers Twist-to-connect style pin lock QD for pin lock style corny kegs Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Gray plastic clearly identifies the disconnect as the gas in QD Plastic quick disconnects for pin lock Cornelius-type kegs. This is a high quality fitting made by CM Becker in Germany. Red and grey quick disconnects are used for the gas in tank plug. 1/4" male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.
$7.99
-
CMBecker Poppet | Corny Keg Part
Will fit most Cornelius kegs. This particular unit is made by CM Becker of Germany and is known for being of good quality.
$10.69
-
CMBecker Shank Tailpiece | 10mm (3/8") Barb | Beer Nut Included
The CMBecker International Inline Flow Control 10mm Barb is necessary for those looking to use tubing that has an inner diameter of 3/8". It is slightly smaller than 1/2", but it will fit a 1/2" ID Hose if properly clamped. Use with CMBecker In-Line Flow Control Compensator Stainless steel nipple, only stainless steel touches your beverage Works with CMBecker International shanks. Includes CMBecker beer nut The size is 10mm which is between 1/2" and 3/8". When using with 3/8" hose you may need to slightly heat hose (using hot water) to stretch hose over barb (this is how we do it!) When using with 1/2" it will be loose, but we have used it with syphon hose and thicker high heat (EJ beverage or silicone) hose. Just make sure you clamp it properly to get a good seal. This will not work with a standard shank, it works with CMBecker shanks
$5.49
-
CMBecker Shank Tailpiece | 4mm (5/16") Barb | Beer Nut Included
The CMBecker Inline Flow Control 4mm Barb is necessary for those looking to use tubing that has an inner diameter of 3/16" Use with CMBecker In-Line Flow Control Compensator Stainless steel nipple, only stainless steel touches your beverage Works with CMBecker International shanks. Includes CMBecker beer nut The size is 4mm. When using with 3/16" hose you may need to slightly heat hose (using hot water) to stretch hose over barb (this is how we do it!) Just make sure you clamp it properly to get a good seal This will not work with a standard shank, it works with CMBecker shanks. These seal at two places and do not have a flat end (see photo)
$5.49
-
CMBecker Shank Tailpiece | 7mm (1/4") Barb | Beer Nut Included
The CMBecker Inline Flow Control 7mm Barb is necessary for those looking to use tubing that has an inner diameter of 5/16 or 3/8" Use with CMBecker In-Line Flow Control Compensator Stainless steel nipple, only stainless steel touches your beverage Works with CMBecker International shanks. Includes CMBecker beer nut The size is 7mm which is slightly wider than 1/4" at 0.27" This will not work with a standard shank, it works with CMBecker shanks.
$5.49
-
CO2 Cartridge - 74 g
These cartridges give the oomph to your mini-regulator dispensing unit! Perfect for dispensing your beer on the go. For use with the Torpedo Mini CO2 Regulator (KEG965A). One canister will push between 1-4 Cornelius kegs, depending on how it is used and the CO2 consumption required. 5/8-18 threading. Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.
$18.49
-
CO2 Regulator Stem O-Ring (2 Pack)
Silicone regulator stem o-ring. For regulators such as the D1060 & D1065, which have an o-ring located where the regulator stem mates with the CO2 cylinder. Pack of 2.
$3.99
-
CO2 Tee - Plastic
Domestically produced Plastic Tee for CO2 Gas Line. Made for 5/16" Tubing
$2.49
-
CO2 Tee | Stainless | 5/16 in Barb
An easy and inexpensive way to split your CO2 gas line to multiple taps. Made from stainless steel; the metal preferred by homebrewers. This Stainless Steel CO2 Tee is sized to work best with 5/16" tubing, the standard size used for gas lines. The barbs on this Tee are 0.4" OD. Be sure to order hose clamps to secure your tubing to the tee. Quick Tips: Place the end of the tubing in 100-120F water for a minute or so to soften before pushing onto the ends of the Tee. We suggest wearing work gloves when putting tubing onto this product as the ends can sometimes be sharp.
$5.49
-
Coffee Brewer Bag
Want an easy way to brew coffee on the go? These disposable coffee maker bags make brewing coffee easy, even when on the go! All you need is coffee grounds and water and you can brew about 2 cups of coffee with each bag.
$2.19 - $43.99
-
Coffee Malt - Simpsons Malt
162 - 226 °L - Simpsons Malt - A brown malt with flavors of, you guessed it, Coffee! This malt will contribute to a smooth mouthfeel, and will add rich flavorful coffee notes to your favorite stouts, porters, or browns.
$4.69 - $84.99
-
Coffee Malt | Viking Malt
Adds nutty and roasted flavors with hints of coffee and dark chocolate Contributes a deep red color even in small doses Recommended use is typically less than 5–10% of your grain bill 132-170 °L - Viking Malt - Viking Coffee Malt is produced by roasting from pilsner malt. The amylolytic activity of Coffee Malt is zero. The amount of fermentable extract is rather low. "Coffee" refers primarily to the malt's color, not its flavor. This malt will lend various levels of aroma, a deep red color, and a nutty / roasted taste, depending on the amount used. Aromas and tastes of coffee and chocolate can be found and they are well balancing the overall taste. Coffee Malt is mainly included in Porters and Stouts, but it can also be used for any other dark colored beers like Dark Ales due to its strong coloring value. Coffee Malt contributes roasted flavors and aromas with hints of dark chocolate and coffee in any beer. Already with rather low dosage portions a remarkable increase in color can be found together with changes in flavor and aroma. Typical dosage rate of Coffee Malt is normally under 5–10%. In 2016 Viking Malt and Danish Malting Group joined forces to better serve their customers. Now the new Viking Malt is the leading malting company in Northern Europe and supply raw materials and services to the global brewing, distilling and food industries. Viking Malt has 6 malthouses in areas where our distinctive Nordic barley is sourced: in Halmstad, Sweden; Vordingborg, Denmark; Lahti, Finland; Panevezys, Lithuania and in Sierpc and Strzegom, Poland. The annual malting capacity is close to 600 kilotons. Malt Specification: Moisture % - max. 5.0 Extract fine % dm - min. 68.0 Color °L - 132-170 See the Documents tab below for Product Information and Typical Analysis.
$3.99 - $79.99
-
Cold Brew Bucket Kit | Ss BrewTech
An elegant combination of 304 stainless steel and non-slip silicone come together for the coffee industry's most complete commercial-grade cold brew system. What's Included: Cold Brew Bucket Lid Stainless Cold Brew Basket w/ Silicone Handle Silicone Lid Deep Bend Pick-Up Tube 10x - High Strength Filter Bags Specs: Designed for 7 gal vessel volume 5 lb. max coffee grounds 3.5 gal max coffee concentrate output Designed to pair with our iconic series of 7 gal | Brew Buckets. The system will also work with the 7 gal | Chronical series.
$149.95
-
Collapsible Silicone Funnel
This collapsible silicone funnel is great to have on hand when adding brining liquid to your mason jar for food fermentation. Rest it in the mouth of the jar and cleanly pour pickling brine on top of your veggies. Collapse it flat and store in it in the kitchen drawer for next time. Approximately 3.25" in diameter.
$2.99
-
Colle Perle
Colle Perle is a hydrolyzed gelatin solution. Primary uses are clarification and the removal of bitter tannins and phenolics. Colle Perle flocculates and settles well. Desirable aromas and flavors are retained while harsh characters are removed. It is particularly useful to optimize potential of hard pressed product. In white wines it can be used in conjunction with bentonite to compact lees. Dosage - Applied at a rate of 4 ml / gal. Usage: Juice - Dilute Colle Perle 1:1 in water. Add at the beginning of cold settling and mix evenly and completely throughout the juice. When used in juice Colle Perle should be used in conjunction with bentonite or Gelocolle to improve settling. Racking should be done after 1 week. Wine in Aging - Dilute Colle Perle 1:1 in water. Stir vigorously into the wine to ensure thorough distribution. Racking should be done after 1 week. Filtration is possible 48-72 hours after fining with Colle Perle.
$5.99 - $41.99
-
Colmated Wine Corks | Molinas MP ECO | Imperfection Corrected Natural Cork | #9 x 1.75" | 24mm x 44mm
Colmated corks offer some benefits of using whole cork for a price similar to agglomerated Whole natural cork coated with particles of cork to fill gaps and provide a better seal Remarkable technical and organoleptic performances, with an optimal seal 24mm X 44mm, #9 x 1.75" | Fits standard cork finish (neck) bottles Recommended aging time: Up to 3 years Molinas Cork has been sustainabily harvesting from the cork forests of Sardinia for over 100 years Bark is aged an additional year prior to harvest, leading to less porous, higher quality cork A quality natural cork coated with cork particles to fill gaps and fix imperfections. A proprietary process offering remarkable technical and organoleptic performance, with a guarantee of an optimal bottle seal. MP ECO is the ideal solution if you want to bottle your wines using a traditional closure at an affordable rate. These corks are recommended for wines aged less than 3 years. 24mm X 44mm, #9 x 1.75". Fits standard cork finish (neck) bottles. Italy produces more wine than any country in the world and Molinas is the largest Italian cork supplier with over 1 billion corks produced annually. Molinas Cork was started over 100 years ago by Pietro Molinas on the Italian island of Sardinia. Besides its beautiful beaches and designation as one of the world's five Blue Zones, Sardinia is known for its large, government protected Cork tree forests. Today, the 4th generation of the Molinas family sustainably harvests cork from these protected trees. Compared to most cork available in the market, the bark is allowed to mature an additional year. This leads to a less porous, higher quality cork, and has less impact on the forest. Throughout the entire process from tree to finished cork, quality control is strictly monitored. MoreFlavor! is proud to represent Molinas Cork in the USA. Manufactured thanks to a high technological process, MP ECO is a natural colmated cork stopper, coated with particles of selected cork. An exclusive productive process, in which are used adjuvants with aqueous base, allowing to obtain the manufacturing a cork stoppers offering remarkable technical and organoleptic performances, with a guarantee of an optimal bottle sealing, as there is a total absence of migrations into the wine. Once closed the lenticels with the cork particles, the cork stoppers gain also an esthetical improvement. The MP ECO is the ideal solution for the wineries that want to bottle their wines using a traditional closure looking also at an attractive rate. Manufactured following the strictest production processes implemented at Molinas cork factory, it offers a complete traceability and it is submitted to continuous organoleptic control during its different processing steps, the best guarantee for the wines. Tolerances on Normal Dimensions: Height: Nom. Value +/- 0,4 mm Diameter: Nom. Value +/- 0,3 mm Humidity: Min: 3% Max: 8% Ovalization: < 0,5 mm Characteristics Physical / Mechanical / Sensory: Perossidi: < 0,2 mg/stopper Organoleptic test: < 2% Dust transfer: < 1,5 mg/stopper Finishing Treatments: Genesis steam treatment for the reduction of tar and other volatile substances. Pores and lenticellar canals filled with cork powder and adhesives. Polyurethane adhesives used for agglomeration of the body and gluing of washers with food certification for food contact. Wash: with diluted peracetic acid. Thermal Marking. Silicone lubricant and adhesives with food certification for food contact.
$8.79 - $241.99
-
Colombia Finca Palmichal | Green Coffee Beans
Discover the vibrant and complex profile of our Colombia Finca Palmichal, Wet Processed green coffee beans. Grown at the renowned Finca Palmichal, these wet processed beans offer a lush and sweet cup with tropical fruit and berry notes. Cupping Notes: Flavor: Expect a vibrant and juicy cup with prominent notes of ripe mango, pineapple, and strawberry. A sweet winey note, reminiscent of red grape or plum, is complemented by hints of dark chocolate and a subtle spice. Body: A medium to full-bodied texture with a syrupy, lingering mouthfeel. Aroma: Intense aromas of ripe tropical fruit, sweet wine, and a rich, chocolatey fragrance. Origin: Finca Palmichal, Colombia Altitude: Typically 1600-1800 meters Varietal: Various (Typically Castillo, Caturra) Process: Wet Processed
$9.99 - $203.99
-
Colombia Huila Region | Green Coffee Beans
Discover the classic Colombian profile of our Huila, Wet Processed green coffee beans. Grown in the renowned Huila region, these beans offer a well-balanced cup with distinct sweetness and vibrant acidity. Cupping Notes: Flavor: Expect a balanced sweetness with notes of caramel and milk chocolate, complemented by a bright, citrus-like acidity reminiscent of orange and lime. Subtle notes of green apple and almond add complexity. Body: A medium-bodied texture with a smooth, clean finish. Aroma: Fragrant aromas of caramel, citrus, and a delicate floral undertone. Origin: Huila, Colombia Altitude: Typically 1500-1800 meters Varietal: Castillo, Caturra, Colombia Process: Wet Processed (Washed) Key points about Wet Processing in Huila: Huila is known for producing consistently high-quality Colombian coffees with a classic, balanced flavor profile. The region's diverse microclimates and high altitudes contribute to the complexity of the coffee Wet processing ensures a clean and bright cup, highlighting the inherent sweetness and acidity of the beans.
$9.99 - $204.99
-
Colombia Nariño | Green Coffee Beans
Experience the bright and clean profile of our Colombia Nariño, Wet Processed green coffee beans. Cultivated in the high-altitude region of Nariño, these beans showcase the region's exceptional terroir, resulting in a vibrant and complex cup. Cupping Notes: Flavor: Expect a bright, clean cup with a pronounced citric acidity, reminiscent of lime and mandarin. Sweet notes of ripe stone fruit, such as yellow plum and peach, are complemented by hints of caramel and a delicate floral undertone. Body: A medium-bodied texture with a crisp, refreshing finish. Aroma: Fragrant aromas of citrus blossom, caramel, and sweet stone fruit. Origin: Nariño, Colombia Altitude: Typically 1700-2200 meters Varietal: Castillo, Caturra, Colombia Process: Wet Processed (Washed) Key points about Wet Processing in Nariño: The high altitude of Nariño contributes to slower cherry maturation, resulting in denser beans and more complex flavors. Wet processing removes the fruit pulp before drying, resulting in a cleaner cup profile with brighter acidity. Nariño coffees are known for their vibrant acidity, sweet fruit notes, and clean flavors.
$8.99 - $188.99
-
Colombia Popayan | Green Coffee Beans
Experience the refined and vibrant profile of our Colombia Popayan Cauca, Wet Processed green coffee beans. Grown in the fertile Cauca region, specifically around Popayan, these washed beans offer an elegant cup with floral notes and crisp green apple acidity. Cupping Notes: Flavor: Expect a delicate floral profile, with notes of jasmine and honeysuckle. A crisp, green apple-like acidity is complemented by notes of caramel and a hint of lime zest. The cup exhibits a clean, bright, and nuanced sweetness. Body: A smooth, medium-bodied texture with a crisp, refreshing finish. Aroma: Fragrant aromas of floral blossoms, green apple, and a subtle caramel sweetness. Origin: Popayan, Cauca, Colombia Altitude: Typically 1700-2000 meters Varietal: Castillo, Caturra, Colombia Process: Wet Processed (Washed)
$8.99 - $182.99
-
Colombia Valle del Cauca Sugarcane EA Decaf | Green Coffee Beans
Colombia Valle del Cauca Sugarcane EA Decaf: Sweet Chocolate & Bright Berry Clarity Discover the remarkably clean and sweet profile of our Colombia Valle del Cauca Sugarcane EA Decaf green coffee beans. Processed using a natural ethyl acetate (EA) method derived from local sugarcane, this decaf preserves the vibrant character and high-altitude complexity of the Cauca Valley without the caffeine. Cupping Notes: Flavor: Expect a sweet and balanced cup with dominant notes of milk chocolate and almond. These are beautifully accented by the juicy sweetness of strawberry and vanilla, with a refreshing citrus finish. Body: This coffee has a medium body, offering a smooth and consistent mouthfeel. Acidity: Bright and lively, maintaining the vibrant acidity often lost in traditional decaffeination processes. Aroma: Inviting aromas of chocolate, sweet berries, and toasted nuts. Origin: Valle del Cauca, Colombia Altitude: 1,750 – 2,100 meters above sea level Varietal: Caturra, Castillo Process: Washed & EA (Sugarcane) Decaffeination
$11.99 - $239.99
-
ColorpHast pH Strips - 4.0 to 7.0 (100 Strips)
A simple, reliable way to test the pH of your beer, no meter required! Quickly test the pH of your mash with confidence using our colorpHast pH strips. These strips are high-quality and made not to run, so you are assured an accurate reading each time. Comes in packs of 100 strips.
$49.99
-
Colt Strong Capping Bell - 29 mm
Swap out the 26 mm capping bell with this 29 mm bell to make the Colt Strong bench capper (B506) compatible with European style bottles that require larger caps.
$17.99
-
Colt Strong High Pressure Bench Bottle Capper
This reinforced bench capper is solid, easy to use machine that will last for years of bottling. The base, column, head, and piston are all reinforced to make this capper very sturdy. The Trigger Grip adjustment mechanism makes is easy to change the height to accommodate a variety of bottle sizes. Features: 26 mm steel full cup capping head Weighs 4 lbs 21 1/2" H x 6 7/8" W x 8 5/8" L To use the Colt Strong with European style bottles with 29 mm caps, see B506B.
$56.99
You have seen 1680 out of 6351 products