New Products Check out what's hot & new
BECOME A VIP Join the VIP text list
20% Off Wine Kits Use code WINEKITS20
Detecting your location...
Best Sellers - Last 30 Days

KegLand Benchy Sparkling | Countertop Water Carbonator & Chiller | Instant Pour Sparkling Water - Used

    Description

    • Instant and infinite sparkling water at your fingertips whenever you want it!
    • Benchy connects to your household's water supply, chills, carbonates, and delivers on demand
    • Serve up to 8 gallons of chilled, carbonated water per hour
    • Pair with draft faucets and place it on your counter, or install it under the counter and plumb it to a mounted water faucet
    • See below for detailed installation video

    Benchy Sparkling is the answer for instant chilled and carbonated water on demand. Simply connect your household water supply and CO2 Cylinder to the unit and receive unlimited sparkling and chilled water from the draft faucets. The chiller is highly efficient with very little power draw while idle and has enough cooling capacity to serve up to 8 gallons of sparkling water per hour. This unit comes without shanks or draft faucets, as it can be used as a countertop unit or installed under your counter and routed to a faucet you install on your counter or kitchen sink. If you plan to use it as a countertop unit, we highly recommend NukaTap Flow Control Faucets.

    Easy Installation:

    • Plug the Benchy into the wall
    • Fill internal water tank
    • Connect household water supply
    • Connect CO2 Cylinder
    • Pour chilled sparking water.

    It's that simple and you can be enjoying chilled sparkling water in under 1 hour with this setup and barely any time at all to cool down.

    Ensure that the unit is installed and operated according to the instruction manual which can be found below.

    Fully Adjustable
    The Benchy Sparkling has an integrated digital temp controller so you can control the temperature from 0.5-10°C (33-50°F). You can also vary the carbonation level from 0.5 volumes to over 5 volumes for super bubbly water.

    Cooling Performance
    The Benchy Sparkling is able to chill about 5 to 8 gallons of sparkling water per hour (based on ambient water and air temperature of 68°F). To further increase the capacity of this unit, you can pre-chill the water from your household supply line either by a holding tank (ball lock keg) in the fridge or a DraftMaster Chiller. If you pre-chill the water you can more than double the output of the Benchy Sparkling. The reservoir temperature on the Benchy should never be set below 2°C (35°F) as you will run the risk of freezing the water inside the carbonation keg.

    Specifications:

    • 110V
    • Refrigerant: r600a (80 grams)
    • Cooling Power: 600 watts
    • Power Consumption: 155 watts (idle power consumption less than 5 watts)
    • Capacity: approximately 6.6 gal/hour (based on 68°F ambient temperature)
    • Input Gas: CO2 @ 29-50 psi (Requires 8mm (5/16") OD tubing)
    • Input Water: Must be 15 psi higher than gas pressure (Requires 6.35mm (1/4") OD tubing)
    • Sparkling/Chilled Water Out: Requires 8mm (5/16") OD tubing
    • Dimensions: 18.3" H x 11.4" W x 20.5" D (Excluding sight glass that can be removed)

    Recommended Accessories:

    • CO2 Gas Cylinder
    • CO2 Regulator
    • EVABarrier 4mm x 8mm Tubing
    • PE Water Line Tubing
    • 6.35mm Duotight In-Line Regulator (0-150 psi)
    • Duotight Reducer - 8mm x 6.35mm
    • 8mm Duotight Check Valve
    • Diverter Valve (check water line connection for the size you'll need)

    Countertop Installation Recommended Accessories:

    • (2) Short Shanks & Hex Nuts
    • (2) Duotight Adapters - Beer Thread x 8mm
    • (2) NukaTap FC Faucets& Self Closing Springs
    • (2) Tap Handles (of your choice)
    • Tube Cutter
    • Faucet & Shank Wrench

    KegLand Part Number: KL2068

    KegLand Benchy Sparkling | Countertop Water Carbonator & Chiller | Instant Pour Sparkling Water - Used

      Product form

      SKU: D1960-UG

      $989.99 $890.10

      Calculating shipping time...
      Shipping
      Free Shipping
      Shipping
      Paid Shipping
      Drop Ship
      Drop Ship
      Discount Exclusion
      Discount Exclusion
      Freight
      Freight Only
      Pre-book
      Pre Order

        Prop 65 Warning WARNING : This product can expose you to chemicals including Lead and lead compounds, which is/are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

        Description

        • Instant and infinite sparkling water at your fingertips whenever you want it!
        • Benchy connects to your household's water supply, chills, carbonates, and delivers on demand
        • Serve up to 8 gallons of chilled, carbonated water per hour
        • Pair with draft faucets and place it on your counter, or install it under the counter and plumb it to a mounted water faucet
        • See below for detailed installation video

        Benchy Sparkling is the answer for instant chilled and carbonated water on demand. Simply connect your household water supply and CO2 Cylinder to the unit and receive unlimited sparkling and chilled water from the draft faucets. The chiller is highly efficient with very little power draw while idle and has enough cooling capacity to serve up to 8 gallons of sparkling water per hour. This unit comes without shanks or draft faucets, as it can be used as a countertop unit or installed under your counter and routed to a faucet you install on your counter or kitchen sink. If you plan to use it as a countertop unit, we highly recommend NukaTap Flow Control Faucets.

        Easy Installation:

        • Plug the Benchy into the wall
        • Fill internal water tank
        • Connect household water supply
        • Connect CO2 Cylinder
        • Pour chilled sparking water.

        It's that simple and you can be enjoying chilled sparkling water in under 1 hour with this setup and barely any time at all to cool down.

        Ensure that the unit is installed and operated according to the instruction manual which can be found below.

        Fully Adjustable
        The Benchy Sparkling has an integrated digital temp controller so you can control the temperature from 0.5-10°C (33-50°F). You can also vary the carbonation level from 0.5 volumes to over 5 volumes for super bubbly water.

        Cooling Performance
        The Benchy Sparkling is able to chill about 5 to 8 gallons of sparkling water per hour (based on ambient water and air temperature of 68°F). To further increase the capacity of this unit, you can pre-chill the water from your household supply line either by a holding tank (ball lock keg) in the fridge or a DraftMaster Chiller. If you pre-chill the water you can more than double the output of the Benchy Sparkling. The reservoir temperature on the Benchy should never be set below 2°C (35°F) as you will run the risk of freezing the water inside the carbonation keg.

        Specifications:

        • 110V
        • Refrigerant: r600a (80 grams)
        • Cooling Power: 600 watts
        • Power Consumption: 155 watts (idle power consumption less than 5 watts)
        • Capacity: approximately 6.6 gal/hour (based on 68°F ambient temperature)
        • Input Gas: CO2 @ 29-50 psi (Requires 8mm (5/16") OD tubing)
        • Input Water: Must be 15 psi higher than gas pressure (Requires 6.35mm (1/4") OD tubing)
        • Sparkling/Chilled Water Out: Requires 8mm (5/16") OD tubing
        • Dimensions: 18.3" H x 11.4" W x 20.5" D (Excluding sight glass that can be removed)

        Recommended Accessories:

        • CO2 Gas Cylinder
        • CO2 Regulator
        • EVABarrier 4mm x 8mm Tubing
        • PE Water Line Tubing
        • 6.35mm Duotight In-Line Regulator (0-150 psi)
        • Duotight Reducer - 8mm x 6.35mm
        • 8mm Duotight Check Valve
        • Diverter Valve (check water line connection for the size you'll need)

        Countertop Installation Recommended Accessories:

        • (2) Short Shanks & Hex Nuts
        • (2) Duotight Adapters - Beer Thread x 8mm
        • (2) NukaTap FC Faucets& Self Closing Springs
        • (2) Tap Handles (of your choice)
        • Tube Cutter
        • Faucet & Shank Wrench

        KegLand Part Number: KL2068

        Documents
        KL20671_-_Benchy_Sparkling_Instruction_Manual
        Important Warnings & Shipping Info +
        Shipping Icon
        Free Shipping: Fast & Free Shipping over $79
        Shipping Icon
        Shipping Rates Apply: Bulk items like grain, bottles, and malt are excluded from our free shipping promotion due to their weight, and often dropship items. Standard shipping rates apply and are calculated at checkout based on your location and order size.
        Drop Ship Icon
        Drop Ship: This product will ship directly from the supplier. Delivery may take 1-4 weeks depending on the vendor.
        Discount Exclusion Icon
        Discount Exclusion: This item is not eligible for sitewide price reductions or percentage discounts. Learn more.
        Freight Icon
        Freight Shipping: This item ships freight only.
        Pre-book Icon
        Pre Order: This item is available for Pre-Order. Full payment is required to reserve stock.

        You Might Also Need

        KOMOS® Premium Dual Gauge CO2 Regulator | 0–60 PSI
        KOMOS® Premium Dual Gauge CO2 Regulator | 0–60 PSI
        $59.99
        Duotight Push-In Fitting - 6.35 mm (1/4 in.) x 8 mm (5/16 in.) Reducer
        Duotight Push-In Fitting - 6.35 mm (1/4 in.) x 8 mm (5/16 in.) Reducer
        $2.79
        Duotight Push-In Fitting - 8 mm (5/16 in.) Check Valve
        Duotight Push-In Fitting - 8 mm (5/16 in.) Check Valve
        $4.99
        KOMOS® Beer Faucet Shank (Stainless) - Cobra Tower Shank
        KOMOS® Beer Faucet Shank (Stainless) - Cobra Tower Shank
        $14.99
        Super Sucker Transfer Pump
        Super Sucker Transfer Pump
        $54.99
        KOMOS® 5 lb CO2 Tank | Premium Aluminum | New | CGA320 Valve | US DOT Approved
        KOMOS® 5 lb CO2 Tank | Premium Aluminum | New | CGA320 Valve | US DOT Approved
        $89.99
        Step Drill Bit | Self-Starting | HSS High Speed Steel | Titanium Nitride Coated | 0.15 – 0.78 in.
        Step Drill Bit | Self-Starting | HSS High Speed Steel | Titanium Nitride Coated | 0.15 – 0.78 in.
        $10.99
        PE Water Line Tubing | Duotight Compatible | 5/32
        PE Water Line Tubing | Duotight Compatible | 5/32" ID x 1/4" OD | 4mm x 6.35mm | 33' Roll
        $18.99
        Duotight In-Line Regulator | Built-In Pressure Gauge | 0-150 PSI | Liquid & Gas Compatible | 6.35 mm Duotight
        Duotight In-Line Regulator | Built-In Pressure Gauge | 0-150 PSI | Liquid & Gas Compatible | 6.35 mm Duotight
        $19.49
        Dual Outlet Water Tap | RO Water | Carbonated Water
        Dual Outlet Water Tap | RO Water | Carbonated Water
        $49.99

        Login

        Forgot your password?

        Don't have an account yet?
        Create account