New Products Check out what's hot & new

BECOME A VIP Join the VIP text list

Detecting your location...

Homebrew Hardware

Stainless Steel Tri-Clamp Fittings

Tri Clamps Stainless Steel Fittings

Stainless steel tri clamp (also referred to as tri clover) fittings are a sanitary, gasketed and clamped connection. Currently used in almost every commercial brewery and winery in the United States, these are becoming increasingly popular in home breweries, too! While there are TC to thread adapter fittings, the main benefit of using this style fitting is because they generally are threadless, making them very easy to keep clean and sanitary. We offer multiple sizes and styles, so are sure to have what you need!

Show previous products

Stainless Tri-Clamp Ferrule | 4" T.C.

4" TC Ferrule is used to weld in a TC connection anywhere you need one! 304 Stainless Steel

Read more less

$15.49
Gasket for 2in Butterfly Valve

Replacement interior gasket for the H661B 2" Butterfly Valve

Read more less

$14.49
Vacuum Breaker with Back Gas Port - 1.5 in. T.C.

This clever device allows you to back fill your tank with an inert gas while cold crashing to avoid the ingress of O2 through the vacuum relief. It is normally used on a tee with a normal PRV/Vacuum Breaker. The NPT port is hooked up to a regulator and set to a low pressure. The exact setting used will depend on the volume of your head space and your regulator. Start at 2 PSI and adjust from there. A pin spanner is required for disassembly. 1.5" tri-clamp 1/2" female NPT port

Read more less

$87.99
ForgeFit Stainless Tri-Clamp Gasket | EPDM | 3.5"

EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals. This gasket is a direct replacement part for the ForgeFit 2" Full Port Ball Valve. For 3.5" tri-clamp fittings Made from EPDM Temperature rated from -30°F to 300°F ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

$1.99
ForgeFit® Stainless Tri-Clamp Hose End | 3" Barb x 3" T.C.

This ForgeFit oversized barb hose end is intended for use with professional beverage tubing. 3" tri-clamp connection with 3" OD barb.

Read more less

$58.49
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 2" T.C. | 24" Long

This tri-clamp extension tube features 2" tri-clamp connections at both ends and is made from high-quality stainless steel. Extension tubes (or spools) are an easy way to extend the length of any T.C. fitting or can be used to hard pipe a brew system for easier cleaning. 2" tri-clamp 24" long Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

$59.49
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 2" T.C. | 12" Long

This tri-clamp extension tube features 2" tri-clamp connections at both ends and is made from high-quality stainless steel. Extension tubes (or spools) are an easy way to extend the length of any T.C. fitting or can be used to hard pipe a brew system for easier cleaning. 2" tri-clamp 12" long Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

$43.99
Stainless Tri-Clamp Barb - 2.5 in. x 2.5 in. T.C.
2 reviews

2.5" Stainless clover clamp x 2.5" Long Barb for hose connection. 304-Type Stainless Steel.

Read more less

$32.99
ForgeFit® Stainless Tri-Clamp Elbow | 90° | 3" T.C.

This elbow fitting features 3" tri-clamp connections at both ends and is made from high-quality stainless steel. Perfect for pairing with the BrewBuilt X3 Conical's 3" bottom port for routing yeast and trub dumps. 3" tri-clamp 90° bend Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

$76.99
ForgeFit® Stainless Tri-Clamp Eccentric Reducer | 3" x 2.5"

Adapt any 3" tri-clamp port or valve to work with an existing 2.5" tri-clamp fitting. The eccentric reducer is typically used when stepping down from one tubing size to another in a horizantal run. The flat side will help to prevent fluid from getting trapped. 3" x 2.5" tri-clamp 3" long Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

$125.99
ForgeFit® Stainless Tri-Clamp Hose End | 1" Barb x 1.5" T.C.

This ForgeFit barb hose end is intended for use with 1" professional beverage tubing. This is the same fitting we use on our pre-fabricated beverage hose assemblies. When designing this fitting, we made sure it has all the features we wanted in a barb intended for professional applications. The hose barb has a shoulder to keep the hose from creeping up towards the fitting end. The long barb promotes solid engagement with the hose and the end has a gentle internal taper to transition the product flow smoothly from the fitting to the tubing. 1.5" tri-clamp connection with 1" OD 2.62" long barb. Overall length 3.25". 3A certified 304 stainless.

Read more less

$32.99
ForgeFit® 3 in. Butterfly Valve Gasket

Replacement gasket for the ForgeFit® 3" butterfly valve. We recommend replacing your butterfly gasket at least every 3 years. If you wait until you have a leak, your valve has already been unsanitary for some time.

Read more less

$42.49
Stainless Tri-Clamp Ferrule | 3" T.C.

3" TC Ferrule is used to weld in a TC connection anywhere you need one! AiSI304 Stainless Steel.

Read more less

$14.49
Stainless Tri-Clamp Ferrule | 2.5" T.C.
1 review

2.5" TC Ferrule is used to weld in a TC connection anywhere you need one! AiSI304 Stainless Steel.

Read more less

$13.49
Anvil Tri-clamp Sidewall Adapter | 1.5" T.C. x 1/2" MPT

The Tri-Clamp Sidewall Adapter is your ultimate solution for versatility. By simply placing the adapter to your sidewall with a 1/2" NPT standard fitting (7/8" hole), you can easily convert it to a Tri-Clamp in seconds, saving you both money and space by eliminating the need to maintain separate lines of NPT and Tri-Clamp equipment. This adapter is designed for seamless compatibility with most brewing kettles and fermenters, including the Anvil Brew Kettle, Bucket Fermenter, Crucible™ Conical Fermenter, Foundry™ Brewing System, and most brewing equipment.

Read more less

$19.99
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 2" T.C. | 18" Long

This tri-clamp extension tube features 2" tri-clamp connections at both ends and is made from high-quality stainless steel. Extension tubes (or spools) are an easy way to extend the length of any T.C. fitting or can be used to hard pipe a brew system for easier cleaning. 2" tri-clamp 18" long Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

$54.99
Stainless Tri-Clamp - 3 in. Elbow

A set of "elbows" is great for connecting hoses to a pump so they run parallel to each other. With 2" and 3" hose, this dramatically reduces the space needed to allow the pump to pass. In addition, having the lines run parallel makes the pump more agile when moving around the brewery or winery when connected. 304-type polished stainless.

Read more less

$60.99
Stainless - 1.5" Tri-Clamp

Used to connect two tri-clamp fittings together to make a sanitary connection. 304 stainless steel. For 1.5" tri-clamp fittings.

Read more less

$7.69
Stainless Tri-Clamp Cross - 1.5 in.

This cross fitting features 1.5" T.C. connections at all ends and is made from high-quality stainless steel. 1.5" tri-clamp 5.75" long x 5.75" tall Made from 304 stainless steel

Read more less

$32.99
Tri-Clamp Gasket | Silicone | 8"

Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets. For 8" tri-clamp fittings Made from Silicone Temperature rated from -58°F to 446°F

Read more less

$4.99
ForgeFit® Stainless Ball Valve | 2" T.C. | Rebuild Kit

This rebuild kit includes a 3.5" T.C. Gasket and 3mm x 77mm O-ring to aid in the repair of the ForgeFit 2" T.C. Ball Valve. The 3.5" T.C. Gasket requires a food grade grease for assembly with the FF190 Ball Valve.

Read more less

$5.49
ForgeFit® Stainless Ball Valve | Full Port | 2" T.C.

This 2" tri-clamp ball valve is full port and completely disassembles for easy sanitation. It is perfect for inserting a mixer into a wine tank or for mixing hops in a beer tank. No tools are required for disassembly. Simply turn the valve to the closed position, remove the 3.5" tri-clamp, remove the bottom thumb screw (drain), and tilt the ball out of the socket by rotating the top towards you. Reassemble in reverse order. Use food safe grease on all surfaces. Note: Take care to not allow fermentation inside the valve. Do not open the valve during fermentation. The drain screw can be removed while the valve is closed to drain the valve. 2" tri-clamp 3.5" T.C. assembly Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

$161.49

You have seen 166 out of 166 products