Homebrew Wort Chillers

In a traditional wort chiller, the coils rest on the bottom of the pot and the hot wort on top takes a very long time to reach them, making the entire process time consuming and inefficient. Our original, simple innovation for the Immersion Wort Chiller from MoreBeer! is to move the coils right to the top where the majority of the heat is. This promises to give you the fastest heat exchange possible, to cool your wort down more efficiently and to get your brew into the fermenter as quickly and cleanly as possible. There is also no need to stir during chilling which reduces contamination and allows your trub and spent hops to settle to the bottom of your kettle. The connection feeds on our chillers our bent out down at an angle so that if there is any dripping at the copper/vinyl connection point it drips out of the kettle and not back into your beer. Also works perfect with a kettle that features a notched lid. Made in the USA in our metal shop.   Specs: 25' of 3/8" copper tubing 8' of vinyl tubing at both the inlet and the outlet Female garden hose adapter fitting for easy use with a garden hose spigot 10" diameter, 8" to the top coil, 15" to the bend to go over the lip of the kettle This chiller also comes in a water efficient version that uses less water.  

Read more less

Few materials are more durable or more attractive than stainless steel, which is exactly what sets this Stainless Steel Wort Chiller from MoreBeer! apart from similar chillers. This high quality stainless wort chiller includes 8 feet of vinyl tubing attached to both the in and out using a female garden hose fitting on the “in” side, as well as 25 feet of stainless steel tubing measuring 3/8 inch diameter. Although stainless steel takes a little longer to cool your worth than comparable copper tubing, its advantage is that it won’t tarnish between uses. Stainless steel is also much more affordable than copper, which makes this an economical choice that won’t sacrifice quality or real-world effectiveness. This stainless steel wort chiller also contains a brass hose adapter for an even more attractive, high quality look and feel. The Stainless Steel Wort Chiller 25’ x 3/8” from MoreBeer! is made entirely in the U.S.  Note: The inner bend on the coils have small indentations that are a natural result of the winding process used during manufacturing. As an upside, these do actually help turbulate the cooling water to eliminate laminar flow (helps increase the cooling capacity).   Product Specifications 25' Stainless tubing 8' Vinyl Tubing Brass Hose Adaptor 10" diameter 8" to the top coil 15" to the bend to go over the lip of the kettle.    

Read more less

This 40 plate chiller is efficient, effective and economical!   This popular addition to your home brewing system promises to cool your wort to the perfect low temperature to get the best cold break possible, and getting your wort to the ideal pitching temperature on the first pass.   Equipped with a 1/2" MPT wort inlet and outlet to match up to the most common size of home brewery hoses, as well as a 3/4" male garden hose thread water inlet and outlet for easy connection to garden hose fittings. It measures approximately 8.25 inches long, 4 inches high and 3 inches wide.   Specifications Wort Inlet/Outlet: 1/2" MPT Water Inlet/Outlet: 3/4" MGHT 8.25" Long x 4" High x 3" Wide

Read more less

You likely want to monitor the temperature of your wort as it moves from the chiller to the fermenter, and now you can do just that with this In-Line Thermometer. This high quality thermometer features stainless steel quick disconnects for easy installation in line with the rest of your brewing system, and many users install it on the “out” side of their convoluted heat exchangers and counterflow chillers. As the wort runs through the body of the in-line thermometer it runs across the 2-inch thermometer probe, giving an instant and incredibly accurate reading of its exact temperature. Ryan Barto, our Fulfillment Operations Manager and also the thermometer’s inventor, says that this handy device will help you to keep better control of your mash temperatures, and makes it easier to transfer your wort to your conical through the counterflow chiller. 

Read more less

The Blichmann Therminator Wort Chiller is one of the most popular tools to use when chilling your wort, as it gets the job done quickly, effectively and without much effort from you. This particular chiller has 40 plates and 316 stainless steel plates and fittings. It features ½ inch MPT for the wort in and out, and a ¾ inch MPT garden hose thread for the water in and out. You’ll be able to chill just like the pros when you use the Blichmann Therminator Wort Chiller, as it is extremely similar to the chillers used in commercial breweries. The Therminator chiller is small but mighty, with the capability to chill 10 gallons of wort down to 68 degrees when using 58 degree water in just five minutes! It measures an ultra compact 7.5 inches wide, 4 inches deep and 3 inches high, which also makes it very easy to clean and sanitize. It is brazed together with pure copper in an oxygen-free furnace so there are no potential leaks, and it even comes with heavy gauge stainless mounting bracket to keep your system looking sturdy and seamless.    All 316 stainless steel plates and fittings. Chill like the pro's - Identical to commercial brewery chillers. Brazed together with pure copper in an oxygen free furnace - no potential leaks like a gasketed unit. Chill 10 gal in 5 min to 68°F using 58°F cooling water at 5 gpm. Ultra compact (7.5" W, 4" D, 3" H) Easy to clean and sanitize - small enough to boil! Garden hose thread connections on water side - no extra adapters to buy. 1/2" male NPT fittings on wort side mates up with virtually all common hose connector types. Much easier to sanitize than female fittings. Comes with heavy gauge stainless mounting bracket

Read more less

25 Feet of 3/8" Copper Coils Raised Up To Where The Heat Is Integrated Turbulator Cools Faster and Uses 40% Less Water 25 Feet of 3/8" Copper Includes Tubing and Standard Garden House / Utility Sink Thread Manufactured in the USA Save water during the cooling process with our Super Efficient Immersion Wort Chiller. During the manufacturing process we build in an inner water turbulator that causes the cold water to spin through the coil. This reduces the laminar flow found in a standard wort chiller where only the outer water is cooled as it travels through the coil. The result is a 40% reduction in water, and faster cooling, when compared with our standard chillers.  But that is when we compare it to OUR standard chillers with the coils at the top. When you compare to other chillers on the market the results are even better. ALL of our chillers feature coils that raised up to where the heat is.  As we learned in school heat rises so when other wort chillers have all the coils on the bottom they actually never cool unless you stir your wort. The problem with stirring is that you mix up all your trub/sediment and you risk airborne contamination... neither of which is good. Our chillers cool fast and allow you to keep your lid on your kettle during the critical cooling period.  Constructed from 25' of 3/8'' copper tubing. 8' of vinyl tubing attached to both the in and the out with a female garden hose fitting on the in side. Use our CE21S hose thread adaptor to attach to your sink. Perfect for a kitchen environment where the sink is close by. This size chiller is ideal for our 8 Gallon Heavy Duty Kettles! The measurements are: Approx. 10" diameter, 8" to the top coil, 15" to the bend to go over the lip of the kettle.

Read more less

Don't fear the Beast, feed the Beast! This heavy duty counterflow wort chiller will gobble up heat from your wort as it passes from kettle to fermenter so you can pitch your yeast as soon as possible. Made from passivated 304 stainless steel, The Beast has a 30 ft. wort line with 1.5" T.C. connections and a 29.5 ft. coolant line with 1/2" male BSPT connections. Tri-clamp connections offer the most sanitary way to pass wort through your heat exchanger and pairs perfectly with BrewBuilt's line of T.C. Kettles and X1 Uni Conical Fermenters. The BSP coolant connections work well with Camlock, Duotight, NPT or other BSP fittings found below. Adding a ball valve to the coolant line inlet is a great way to dial in flow for maximum cooling efficiency! When it comes to counterflow chillers, we love the coil design for its ease-of-use. Plate chillers are great for their high efficiency and compact size, but if there's too much hop matter running through them, they can quickly clog up. Transferring wort from your kettle to your fermenter is one of the critical steps in the brewing process where you don't want any hiccups. The Beast's wort line is 1/2" ID so it can withstand high amounts of hop additions without clogging! A cross bar is welded on one side of the coil with pre-drilled mounting holes allowing it to be easily installed under your work bench or mounted directly to your brewing system. Specs: Beer Line: 30 ft. long Beer Connection: 1.5" tri-clamp Coolant Line: 29.5 ft. long Coolant Connection: 1/2" BSPT Crossbar with pre-drilled mounting holes (4mm) Made from 304 stainless steel  

Read more less

The Anvil stainless steel immersion chiller is ideal for cooling your wort FAST. The 3/8” x 28 ft long cooling coil offers a massive amount of surface area to chill your wort quickly to pitching temperatures. Also included is a 10 ft length of hose and all the fittings and clamps you’ll need to get up and running without trips to the hardware store. The included garden hose adapter fitting makes connecting to your water supply a breeze. Dimensions: Total height: 20 in Coil height: 12 in Coil width: 8.5 in    

Read more less

Say goodbye to chilling with buckets of ice water! This larger version of our MoreBeer! Immersion Chiller is perfect for cutting the chilling time down on your 10 gallon batches of beer. It is made of 50 feet of ½ inch copper tubing with brass fittings for garden hoses on either end for easy access to your water supply. It has a bend at the top to fit over the lip of a kettle, and fits well in a variety of kettle sizes. You can tell that this immersion chiller is truly built to last by looking at its weight and craftsmanship. It is heavy and sturdy with brass--not plastic--fittings. You will be able to rely on this quality, time-saving chiller for years to come.   Measurements: Approx. 10"" diameter, 13"" to the top coil, 24"" to the bend to go over the lip of the kettle.

Read more less

Keep your Blichmann Therminator clean inside and prevent harmful contamination of your wort by using the Blichmann Therminator Chiller Back-Flush Hose Assembly. If you use the Therminator to chill your wort after the boil, the back-flush hose is an essential piece of equipment to help keep the inner plates clean. This sturdy hose is designed especially to attach to your Therminator in order to flush excess liquid and hop material out thoroughly. Instead of trying to assemble your own hose in order to flush your Therminator, make things quicker and easier with this Blichmann Therminator Chiller Back-Flush. Simply attach it to your chiller immediately after you cool the wort and flush it out to help prevent bacteria from forming. 

Read more less

Many home brewing aficionados prefer to cool their wort using a Wort Chiller 5 Gallon Recirculation Package, and we couldn’t agree more. MoreBeer! customer and friend Jamil Zainasheff invented this innovative system in order to create a fast heat exchange that uses far less water than a traditional wort chiller. The wort travels from the kettle to a pump and back into the kettle through a short, copper arm that disperses the hot wort into a wall of cooling coils, cooling the wort effectively and efficiently. Because this cooling system recirculates the wort in the same vessel, you can continue to chill it until it reaches the proper temperature before transferring it into the fermenter. Simply add a thermometer to the boil kettle and you’ll be sure to get consistent results every time you use this recirculation arm. Also available in a 10 gallon size. A chiller will need to be purchased separately. This option works on our WC20, WC20A WC23, and WC23A, only. 1/2"OD, 3/8"ID 23.5" Double Bent 1/2" Copper Piece For Recirculation Chilling Bent Perpendicular 90 Degrees at 5" and 5"

Read more less

Our preferred method to cool, and invented by MoreBeer! customer Jamil Zainasheff. How it works: Wort travels from the kettle to a pump and back into the kettle via a short copper arm that aims the hot wort into the wall of cooling coils. This creates a flow of hot wort across the coils of your wort chiller and throughout your kettle. The movement of wort creates a fast heat exchange, and uses far less water than a traditional wort chiller. Recirculating the wort in the same vessel allows you to continue chilling until your wort gets to the proper pitching temperature before transferring to your fermenter. Add a thermometer into your boil kettle to get consistent results every time! Start recirculation before the end of the boil so everything the wort moves through will be sanitized. Most of the chilling happens on the outside of the coil allowing for a much simpler cleanup. Comes with instructions, 2 zip ties, one hose clamp and copper re-circulation tube 1/2". This system does require the use of a pump, like our H315HF High-Temp pump. A wort chiller will need to be purchased separately. This option works on our WC30, WC45, WC50, and WC55 only. 1/2"OD, 3/8"ID 25 1/2" Double Bent 1/2" Copper Piece For Recirculation Chilling Bent Perpendicular 90 Degrees at 5" and 5"

Read more less

Plate heat exchangers are one of the fastest ways to cool your wort and the Chillout is one of the best. The Chillout MKIV, now with new and improved male 1/2" BSP threaded posts, is the fastest way to chill your wort to yeast pitching temperature to get your fermentation off to a quick healthy start. made from stainless steel and brazed together with pure copper. It also has ripples along each plate that create more surface area to improve heat transfer. A great addition to your brewing setup. Set up one side with Wort in & out, and Water out & in on the other side.  Features: Made from stainless steel and copper Rippled plates for more surface area 1/2" Male BSP connections Dimensions: 12.4" x 2.8" x 2" (not including threads) KegLand Part Number: KL21234    

Read more less

Counterflow design provides rapid, single-pass wort chilling Larger flow area minimizes hop clogs compared to plate chillers 9.5mm Duotight compatible inlet/outlets allow for quick and easy hose connections Durable PEX tubing resists high temperatures and pressures, extending the chiller's lifespan Tired of slow, inefficient wort chilling? Meet the Red Reaper Counterflow Chiller, your ultimate brewing ally. This isn't just another chiller; it's engineered for speed, durability, and hassle-free brewing. Unleash Rapid Cooling with Superior Design: Robust PEX/Copper Construction: Unlike standard clamped connections, the Red Reaper boasts PEX tubing swaged and soldered directly to the copper wort pipe. This innovative design guarantees a leak-proof, high-pressure connection, ensuring your cooling water stays where it belongs. Lightning-Fast Duotight Compatibility: Seamlessly connect your hoses and camlock fittings in seconds with the 9.5mm Duotight compatibility. Brew more, fuss less. Add the Duotight Push-In Thermowell Tee to add a thermometer to your wort out line. High-Efficiency Counterflow Design: Featuring an internal copper tube for wort circulation and an outer chamber for counterflowing cold water, the Red Reaper maximizes heat transfer for rapid chilling. Experience the power of single-pass cooling from boiling to pitching temperatures. Clog-Resistant Flow: Enjoy the benefits of a plate chiller's efficiency with a larger flow area that minimizes hop clogs. Built for Performance and Longevity: The Red Reaper utilizes the same pressure and temperature-resistant PEX hosing trusted in professional plumbing, offering exceptional flexibility and durability. We recommend recirculating your last 15 minutes of boil through the Red Reaper to sanitize it before chilling with cold water. Easy Cleaning and Maintenance: For optimal cleaning, circulate hot PBW for a minimum 5-minute contact time. Alternate flow direction for thorough cleaning, and rinse with water at the same temperature. Important Care Instructions: Avoid Sunlight: Prolonged exposure to sunlight can degrade the PEX tubing. No Acidic Cleaners: Do not store with StarSan or other acidic products, as they can damage the copper. What is PEX? PEX (cross-linked polyethylene) is a flexible, durable plastic tubing used as a reliable alternative to traditional copper or steel plumbing. Choose Your Fittings: The Red Reaper comes with bare, 3/8" barbs that you can simply clamp your tubing onto. However, we recommend using 9.5mm Duotight x 1/2" male thread adapters which will allow you to convert to your preferred fittings for the water and wort lines -- Camlock, Garden Hose, Tri-Clamp, Quick Disconnect (QD), etc. Specifications: 18.3 ft. Length 3/8" barb inlet/outlet 9.5mm Duotight compatible Rubber feet Hinged hanger (for BrewZilla handles) KegLand Part Number: KL38355  

Read more less