WineStix Segments are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These WineStix Segments feature a Toast Blend of 40% Medium, 40% Medium Plus and 20% Dark toasted stave. One 1 lb/490 grams treats approximately 100 gallons of wine. Due to careful aging and seasoning of the American Oak and a precise toasting, WineStix offer specific flavors and aromas that add character to your wine!
Please Note: Allow 2 months extraction time to balance the extractions of short and long grain. This is our fastest extraction. Removal of the wood early only allows certain extractions of flavors and primarily from the short grain in the WineStix® milling. The end result is in likeness to a second use Barrel.
Traditional design meets modern technology and materials
Oval design allows for unhindered convection currents during fermenation
Supports constant circulation—eliminating hot spots and leading to faster fermentations
Smooth interior surface makes cleaning quick & easy
Made in Germany by Speidel
The Fermentegg represents a new take on one of the oldest vessel shapes for winemaking. Oval vessels have been used to ferment and store wine for thousands of years, however Speidel's Fermentegg brings this concept to modern times with a lightweight yet heavy duty, food-safe polyethylene construction.
The egg shaped vessel results in convection currents during fermentation, unhindered by corners or edges. This movement results in your beer or wine constantly circulating, with an end result of a more complex, yet unified product. Fermentations will generally complete quicker due to the motion of the product, and hot spots will be eliminated as the product remains at a homogenous temperature. Can be used to ferment wine, beer or even cider!
Speidel has become known as a forward moving company in fermentation equipment and following in the foot steps of the Speidel Plastic Fermenter, the egg is very easy to clean because of it's smooth inside surface.
Specifications:
Height: 120 cm
Width: 76 cm
Lid has a 38 mm hole which can be utilized for use with the Speidel Red Rubber Stopper and Airlock
Includes 2 x 1" Male BSPP stainless steel ball valves (H632B recommended for adapting)
Please Note: these vessels are recommended for primary fermentation and short term aging only. They are not pressurizable and may experience oxygen ingress if used for long term storage or prolonged aging.
Premium quality laser-welded 304 stainless steel closed tank
Made in Germany by Speidel and backed by a 25-year warranty
Ideal for spirits and fermented beverages like wine, beer, cider, and kombucha.
Ultra-smooth 2R interior finish allows for easy cleaning with cold water
Outfitted with a 6-bar max cooling jacket for efficient glycol cooling
1.5” tri-clamp ports with two additional DIN ports for included thermometer/thermowell combo and sample valve
The top lid provides a convenient opening for additions and the legs provide easy access to the bottom ports
Vaulted complete drainage bottom for maximum product yield and easy cleaning
We are proud to present these FD storage tanks made of premium quality 304 stainless steel. Built in Germany by Speidel and sold exclusively in the USA by MoreWine! Pro for over 20 years, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality, and price, these tanks represent the very best value available in stainless steel beer storage.
Safely store small volumes of product in these beautiful tanks. The legs make accessing the ports easy and the convenient top hatch makes cleaning a dream when combined with the 2R interior finish. Heavy-duty sealing mechanism and gasket form a seal on top with a stainless steel lid equipped with a T.C. port for adding accessories or an airlock. The inside is finished to Speidel quality standards with flawless welds and a 2R finish.
The tanks will support a few PSI of pressure, however, they are not pressure-rated or designed to be used under pressure.
Tank Ports
Tanks feature 1.5" T.C. outlets (1 on bottom for complete drainage, one in middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. One DIN port is equipped with an included sample valve and the other has an included thermometer and thermowell combination. The cooling jackets have two 1” NPT ports.
Speidel Quality Features
Full Jacket - These tanks are equipped with a max cooling jacket rated to 6-bar. This will allow you to hook it into a glycol system for complete temperature control.
Interior Finish - Speidel tanks feature an ultra-smooth 2R interior surface which allows you to clean your tanks with cold water, without scrubbing. This saves significant labor costs.
Weld Quality - Speidel's robotic-arm laser welders create flawless stainless-to-stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual products to harbor spoilage organisms.
Warranty - Speidel and MoreWine! Pro back up each and every tank with an industry-leading 25-year warranty against defects in materials or workmanship.
Thickness - Speidel tanks are on average around 25% thicker than Italian-manufactured tanks of the same general capacity and dimensions.
Complete Drainage Bottoms - These tanks are outfitted with vaulted bottoms for total drainage, which maximizes product yield at racking and makes cleaning a snap.
Tank Features:
Full Volume of 625 L (165 gal)
1.5" T.C. Drain, Racking Port, and Lid outlet
8.5" Top hatch for easy cleaning and additions
2 X DIN10 Fittings w/ Sample Valve and Thermowell/Thermometer combo
Tank Dimensions: 820mm D x 1661mm H (32.25" D x 60" H)
A stainless platform designed for the full malt pipe to be lowered onto it and rolled to a point of disposal. Extremely convenient for large batches.
Specifically sized to the 500l Brau, this unit is equipped with sturdy wheels, designed to make mash disposal that much easier!
Insulating Jacket for both the body of your 500l Braumeister, and the lid. Helps to both reach and maintain temperatures, especially in cold environments.
Replace a lost or broken tube for your 200L Braumeister with this 2m transfer tubing with connectors.
6 bar pressure limit
275 degree F temperature limit
25mm inner diameter
38mm outer diameter
G-Type keg coupler for Anchor Steam and some other European kegs
Pull-to-engage ergo lever handle
Includes 3/8" OD barb for gas inlet
Bass G style keg tap, also known as, keg coupler, coupling, or adapter. Fits Anchor Brewing kegs.
Will also fit:
Abbot Ale
Anchor Liberty Ale
Anchor Porter
Anchor Steam
Bass Pale Ale
Blackthorne Cider
Caffrey's
Fuller's ESB
Fuller's London Pride
Grolsch
Old Speckeled Hen
Rouge
Scottish Tennents
Sir Perry William's
Watney's
Young's
Young's Chocolate Stout
Young's Oatmeal Stout
Young's Ram Rod Bitter
Young's Special London Ale
A deluxe quality drip tray gives your setup a professional look and makes cleanup a snap!
The Deluxe Stainless Counter-Top Drip Tray has a louvered splash grate and can be easily cleaned in the dishwasher or sink. The 8" width easily accommodates a double faucet tower. Rubber feet hold the tray securely and protect your counter from scratches.
Deluxe features include a brushed finish 304 stainless steel, which is more expensive and difficult to work with - but looks beautiful. We carefully TIG weld the corners instead of sealing with a bead of silicone, or over-welding and then grinding which destroys the finish.
Designed by MoreBeer! & Made in the USA.
8 1/4" Wide x 5 3/8" Deep x 3/4" Tall
Faucet shanks allow you to mount a draft faucet just about anywhere. Typically installed in the door or wooden collar of of a converted fridge/freezer, the front of a cooler, or even in your house’s wall when constructing that ultimate home bar!
Once installed your beer line connects to the back of the shank and a faucet attaches to the front. Shanks are available in a range of sizes to accommodate mounting on materials of varying thicknesses.
The shank’s listed size refers to the total length of threaded pipe. Approximately 1 1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project.
Features a welded 3/16” barb and includes a glossy black plastic collar and locknut. Requires a 1” hole for installation.
Dimensions:
6-1/4" - Total Length (Tip to Tip)
5-1/2" - Shank Length (Without Nipple)
4-1/8" - Thread Length
5-1/4" - Pass Through Length
Set of Body Seal and Mechanical Seal needed to completely rebuild the pump head. We recommend changing these out at the same time you change your impeller (PMP200A).
Premium quality laser-welded 304 stainless steel closed tank
Made in Germany by Speidel and backed by a 25-year warranty
Ideal for spirits and fermented beverages like wine, beer, cider, and kombucha.
Ultra-smooth 2R interior finish allows for easy cleaning with cold water
Outfitted with a 6-bar max cooling jacket for efficient glycol cooling
1.5” tri-clamp ports with two additional DIN ports for included thermometer/thermowell combo and sample valve
The top lid provides a convenient opening for additions and the legs provide easy access to the bottom ports
Vaulted complete drainage bottom for maximum product yield and easy cleaning
We are proud to present these FD storage tanks made of premium quality 304 stainless steel. Built in Germany by Speidel and sold exclusively in the USA by MoreWine! Pro for over 20 years, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality, and price, these tanks represent the very best value available in stainless steel beer storage.
Safely store small volumes of product in these beautiful tanks. The legs make accessing the ports easy and the convenient top hatch makes cleaning a dream when combined with the 2R interior finish. Heavy-duty sealing mechanism and gasket form a seal on top with a stainless steel lid equipped with a T.C. port for adding accessories or an airlock. The inside is finished to Speidel quality standards with flawless welds and a 2R finish.
The tanks will support a few PSI of pressure, however, they are not pressure-rated or designed to be used under pressure.
Tank Ports
Tanks feature 1.5" T.C. outlets (1 on bottom for complete drainage, one in middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. One DIN port is equipped with an included sample valve and the other has an included thermometer and thermowell combination. The cooling jackets have two 1” NPT ports.
Speidel Quality Features
Full Jacket - These tanks are equipped with a max cooling jacket rated to 6-bar. This will allow you to hook it into a glycol system for complete temperature control.
Interior Finish - Speidel tanks feature an ultra-smooth 2R interior surface which allows you to clean your tanks with cold water, without scrubbing. This saves significant labor costs.
Weld Quality - Speidel's robotic-arm laser welders create flawless stainless-to-stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual products to harbor spoilage organisms.
Warranty - Speidel and MoreWine! Pro back up each and every tank with an industry-leading 25-year warranty against defects in materials or workmanship.
Thickness - Speidel tanks are on average around 25% thicker than Italian-manufactured tanks of the same general capacity and dimensions.
Complete Drainage Bottoms - These tanks are outfitted with vaulted bottoms for total drainage, which maximizes product yield at racking and makes cleaning a snap.
Tank Features:
Full Volume of 525 L (138 gal)
1.5" T.C. Drain, Racking Port, and Lid outlet
8.5" Top hatch for easy cleaning and additions
2 X DIN10 Fittings w/ Sample Valve and Thermowell/ Thermometer combo
Tank Dimensions: 820mm D x 1466mm H (32.25" D x 57.7" H)
Premium quality laser-welded 304 stainless steel closed tank
Made in Germany by Speidel and backed by a 25-year warranty
Ideal for spirits and fermented beverages like wine, beer, cider, and kombucha.
Ultra-smooth 2R interior finish allows for easy cleaning with cold water
Outfitted with a 6-bar max cooling jacket for efficient glycol cooling
1.5” tri-clamp ports with two additional DIN ports for included thermometer/thermowell combo and sample valve
The top lid provides a convenient opening for additions and the legs provide easy access to the bottom ports
Vaulted complete drainage bottom for maximum product yield and easy cleaning
We are proud to present these FD storage tanks made of premium quality 304 stainless steel. Built in Germany by Speidel and sold exclusively in the USA by MoreWine! Pro for over 20 years, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality, and price, these tanks represent the very best value available in stainless steel beer storage.
Safely store small volumes of product in these beautiful tanks. The legs make accessing the ports easy and the convenient top hatch makes cleaning a dream when combined with the 2R interior finish. Heavy-duty sealing mechanism and gasket form a seal on top with a stainless steel lid equipped with a T.C. port for adding accessories or an airlock. The inside is finished to Speidel quality standards with flawless welds and a 2R finish.
The tanks will support a few PSI of pressure, however, they are not pressure-rated or designed to be used under pressure.
Tank Ports
Tanks feature 1.5" T.C. outlets (1 on bottom for complete drainage, one in middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. One DIN port is equipped with an included sample valve and the other has an included thermometer and thermowell combination. The cooling jackets have two 1” NPT ports.
Speidel Quality Features
Full Jacket - These tanks are equipped with a max cooling jacket rated to 6-bar. This will allow you to hook it into a glycol system for complete temperature control.
Interior Finish - Speidel tanks feature an ultra-smooth 2R interior surface which allows you to clean your tanks with cold water, without scrubbing. This saves significant labor costs.
Weld Quality - Speidel's robotic-arm laser welders create flawless stainless-to-stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual products to harbor spoilage organisms.
Warranty - Speidel and MoreWine! Pro back up each and every tank with an industry-leading 25-year warranty against defects in materials or workmanship.
Thickness - Speidel tanks are on average around 25% thicker than Italian-manufactured tanks of the same general capacity and dimensions.
Complete Drainage Bottoms - These tanks are outfitted with vaulted bottoms for total drainage, which maximizes product yield at racking and makes cleaning a snap.
Tank Features:
Full Volume of 240 L (63.4 gal)
Perfect for blending two barrels of wine
1.5" T.C. Drain, Racking Port, and Lid outlet
8.5" Top hatch for easy cleaning and additions
2 X DIN10 Fittings w/ Sample Valve and Thermowell/Thermometer combo
2 x 1" NPT Ports on the jacket
Tank Dimensions: 550mm D x 1524mm H (21.6" D x 60" H)
Installation of Levelling Feet on a Speidel Tank. Levelling Feet can be used to orient a tank into a perfectly vertical position even though it is in place on sloped floors. This option is for round tanks 140cm - 160cm in diameter. Installs two feet per leg of the tank. Feet are adjustable by hand and then set in position with a locking nut and crescent wrench - easy and fast to set up.
Please Note: Purchasing this item installs an optional feature on a Speidel Tank. This item cannot be purchased independently, and must be purchased on the same invoice as the tank it is to be installed on to ensure accurate manufacturing.
Installation of Levelling Feet on a Speidel Tank. Levelling Feet can be used to orient a tank into a perfectly vertical position even though it is in place on sloped floors. This option is for round tanks 100cm - 120cm in diameter. Installs one foot per leg of the tank. Feet are adjustable by hand and then set in position with a locking nut and crescent wrench - easy and fast to set up.
Please Note: Purchasing this item installs an optional feature on a Speidel Tank. This item cannot be purchased independently, and must be purchased on the same invoice as the tank it is to be installed on to ensure accurate manufacturing.
Rolling cart wine plate filter
Plates made from food-grade Noryl
Built-in stainless centrifugal pump
Built-in pressure gauge
1.5" tri-clamp inlet/outlet
1,200L/h wine filtering capacity
Made in Italy by Marchisio
Commercial plate filter featuring 41 20cm x 20cm plates. Included 110v 1/2hp, stainless motor will pump wine from your container and push it through the filter and into your aging tank or bottle filler.
Features:
304 Stainless Steel Construction
Four Casters for easy movement. Two of the casters have locks
Built-in centrifugal stainess steel pump with on/off switch.
41 Food-Grade Noryl plastic plates included.
Double filtration kit available
Built-in pressure gauge
Maximum pump pressure is 2.5 bar (35 p.s.i.)
Up to 1200L (317 gal) Flow rate per hour
940x480x590mm/37x19x23 inches
114 lbs
1.5" Tri-Clamp inlet and outlet
Pads should be placed in the machine rough-smooth-smooth-rough
Minimum number of plates that can be used is 30
This is a dome lid for Ss Brewtech 1/2 bbl Chronicals. It features a 3" tri clamp opening at the top to facilitate dry hopping or cleaning your fermenter in place. Made from 304 stainless steel. Does not include 3" TC gasket and clamp.
The KOMOS Deluxe Kegerator model boasts the same features as the standard model with an eye-catching stainless steel extrerior and upgraded stainless steel drip tray. The interior is designed to fit up to four 5-gallon ball lock kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless door and exterior, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless steel door, top cover, and side panels Stainless Countertop Style Drip Tray Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 See below for the Kegerator Instruction Manual. (The Deluxe Kegerator does not have feauture a Guard Rail as seen in the residental kegerator instructions.) Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
TWO - 240VAC 30AMP GFCI Dedicated Circuits Required
Designing every piece of our electric brewing equipment from scratch has enabled us to introduce a new level of process control, flexibility, and performance. Every detail has been carefully thought through and refined.
Beginning with control, our eControllers include a fully proportional PID output, which doesn't rely on SSR's or high speed switching to modulate heat. Instead, voltage is modulated, this means element wattage is proportional, and can be fine-tuned from 0-100% for holding temps steady during a mash rest, or dialing in a perfect rolling boil. The eController quickly finds equilibrium with environmental heat loss characteristics, and can maintain a high degree of accuracy.
Next, we thought about the best way to maintain a high level of flexibility. One such method was using a common interconnect throughout our line of eControllers and eKettles, in an attempt to minimize proprietary connectors, and leverage trusted UL approved connector types. The modularity of our eBrewing system allows a user to splice an HLT or Boil Kettle into their system for instance, without having to purchase an entirely new 3 vessel brewhouse.
In addition, flexibility is realized through the use of our custom-designed element and eKettle element port, which allows for easy removal of the element for cleaning. In addition, we didn't settle for a common, off the shelf straight or ripple element. Instead, we designed a low watt density halo element, specifically sized to the corresponding kettle volume. This design is better suited to distributing heat evenly throughout the kettle, in addition to fostering an effective whirlpool and trub cone formation. Crafted from Incoloy 800 alloy, our element carries a higher resistance to heat and oxidation than standard stainless.
Lastly, performance is deeply important to everything we design. We sized the element and controller in both 10 and 20 gallon sizes to maximize a standard 240 VAC, 30 amp residential circuit. As a result ramp times are quick, which work to shorten the brew day. We also wanted to blend some of our latest product enhancements alongside some of our classic tech. So we decided on a kettle with fully welded TC fittings, alongside our venerable trub dam, which is now paired with a TC ball valve. Even small aesthetic details were not overlooked, such as a front to back handle orientation for a more compact horizontal brewhouse layout. Or integrating a PT100 temperature probe into the heating element base, which alleviates the need for a dedicated thermowell port.
For the 3V eBrewing system, we are combining an eController 3V along with a pair of eKettles (one as an HLT and one as a Boil Kettle) and an InfuSsion Mashtun paired with our RIMS.
This system includes the following:
eController 3V
(2) eKettles with Elements
InfuSsion Mash Tun
RIMS
All 304 Stainless eKettle with Fully welded TC Fittings
1.5" TC ball valve port with trub dam
1.5" TC accessory port
2" TC element port with proprietary element locknut system
5500 Watt Halo Heating Elements
3500 Watt RIMS Element
Integrated PT100 temperature probe
L6-30 connector molded into element base
Anodized aluminum controller housing
Omron PID controller with Proportional Control
Auto and Manual mode switching
(2) 120 VAC Accessory receptacles
Designing every piece of our electric brewing equipment from scratch has enabled us to introduce a new level of process control, flexibility, and performance. Every detail has been carefully thought through and refined.
Beginning with control, our eControllers include a fully proportional PID output, which doesn't rely on SSR's or high speed switching to modulate heat. Instead, voltage is modulated, this means element wattage is proportional, and can be fine-tuned from 0-100% for holding temps steady during a mash rest, or dialing in a perfect rolling boil. The eController quickly finds equilibrium with environmental heat loss characteristics, and can maintain a high degree of accuracy.
Next, we thought about the best way to maintain a high level of flexibility. One such method was using a common interconnect throughout our line of eControllers and eKettles, in an attempt to minimize proprietary connectors, and leverage trusted UL approved connector types. The modularity of our eBrewing system allows a user to splice an HLT or Boil Kettle into their system for instance, without having to purchase an entirely new 3 vessel brewhouse.
In addition, flexibility is realized through the use of our custom-designed element and eKettle element port, which allows for easy removal of the element for cleaning. In addition, we didn't settle for a common, off the shelf straight or ripple element. Instead, we designed a low watt density halo element, specifically sized to the corresponding kettle volume. This design is better suited to distributing heat evenly throughout the kettle, in addition to fostering an effective whirlpool and trub cone formation. Crafted from Incoloy 800 alloy, our element carries a higher resistance to heat and oxidation than standard stainless.
Lastly, performance is deeply important to everything we design. We sized the element and controller in both 10 and 20 gallon sizes to maximize a standard 240 VAC, 30 amp residential circuit. As a result ramp times are quick, which work to shorten the brew day. We also wanted to blend some of our latest product enhancements alongside some of our classic tech. So we decided on a kettle with fully welded TC fittings, alongside our venerable trub dam, which is now paired with a TC ball valve. Even small aesthetic details were not overlooked, such as a front to back handle orientation for a more compact horizontal brewhouse layout. Or integrating a PT100 temperature probe into the heating element base, which alleviates the need for a dedicated thermowell port.
For the 2V eBrewing system, we are combining an eController 2V along with a pair of eKettles (one as an HLT and one as a Boil Kettle).
This System includes the following:
(1) eController 2V
(2) eKettles with Elements
All 304 Stainless eKettle with Fully welded TC Fittings
1.5" TC ball valve port with trub dam
1.5" TC accessory port
2" TC element port with proprietary element locknut system
5500 Watt Halo Heating Element
Integrated PT100 temperature probe
L6-30 connector molded into element base
Anodized aluminum controller housing
Omron PID controller with Proportional Control
Auto and Manual mode switching
(2) 120 VAC Accessory receptacles
240VAC 30AMP GFCI Dedicated Circuit Required
*Images shown are of 10 gal eKettle
Designing every piece of our electric brewing equipment from scratch has enabled us to introduce a new level of process control, flexibility, and performance. Every detail has been carefully thought through and refined.
Beginning with control, our eControllers include a fully proportional PID output, which doesn't rely on SSR's or high speed switching to modulate heat. Instead, voltage is modulated, this means element wattage is proportional, and can be fine-tuned from 0-100% for holding temps steady during a mash rest, or dialing in a perfect rolling boil. The eController quickly finds equilibrium with environmental heat loss characteristics, and can maintain a high degree of accuracy.
Next, we thought about the best way to maintain a high level of flexibility. One such method was using a common interconnect throughout our line of eControllers and eKettles, in an attempt to minimize proprietary connectors, and leverage trusted UL approved connector types. The modularity of our eBrewing system allows a user to splice an HLT or Boil Kettle into their system for instance, without having to purchase an entirely new 3 vessel brewhouse.
In addition, flexibility is realized through the use of our custom-designed element and eKettle element port, which allows for easy removal of the element for cleaning. In addition, we didn't settle for a common, off the shelf straight or ripple element. Instead, we designed a low watt density halo element, specifically sized to the corresponding kettle volume. This design is better suited to distributing heat evenly throughout the kettle, in addition to fostering an effective whirlpool and trub cone formation. Crafted from Incoloy 800 alloy, our element carries a higher resistance to heat and oxidation than standard stainless.
Lastly, performance is deeply important to everything we design. We sized the element and controller in both 10 and 20 gallon sizes to maximize a standard 240 VAC, 30 amp residential circuit. As a result ramp times are quick, which work to shorten the brew day. We also wanted to blend some of our latest product enhancements alongside some of our classic tech. So we decided on a kettle with fully welded TC fittings, alongside our venerable trub dam, which is now paired with a TC ball valve. Even small aesthetic details were not overlooked, such as a front to back handle orientation for a more compact horizontal brewhouse layout. Or integrating a PT100 temperature probe into the heating element base, which alleviates the need for a dedicated thermowell port.
For the 1V eBrewing system, we are combining an eController 1V along with a 10 gallon eKettle. This bundle is perfect to add on to an existing 3 vessel brewhouse, such as replacing a kettle or HLT. Or it can be used as a standalone brew in a bag (BIAB) system.
This system includes the following:
(1) eController 1V
(1) eKettle with Element
All 304 Stainless eKettle with Fully welded TC Fittings
1.5" TC ball valve port with trub dam
1.5" TC accessory port
2" TC element port with proprietary element locknut system
5500 Watt Halo Heating Element
Integrated PT100 temperature probe
L6-30 connector molded into element base
Anodized aluminum controller housing
Omron PID controller with Proportional Control
Auto and Manual mode switching
(2) 120 VAC Accessory receptacles
240VAC 30AMP GFCI Dedicated Circuit Required
*Images shown are of 10 gal eKettle
Designing every piece of our electric brewing equipment from scratch has enabled us to introduce a new level of process control, flexibility, and performance. Every detail has been carefully thought through and refined.
Every component of our new eControllers were designed in house or selected to enhance the ebrewing experience. Beginning with the custom extruded 6061 aircraft-grade aluminum housing, which is CNC machined, and then coated in a durable black anodized finish. Using this approach allowed us to keep the system compact, portable, and functional. The housing includes an integrated carry handle for easy setup and take down, a tee-slot for alternative mounting options, along with a heatsink to keep the internal electrical components cool.
The boil kettle output on the eController is driven by a fully proportional PID controller, which doesn't rely on high speed switching to modulate heat. Instead, voltage is modulated through an internal SSVR, this means element wattage is proportional. A switch located just above the PID allows the user to operate the controller in manual or automatic modes.
In manual mode, the proportional output can be fine-tuned on a scale of 0-100% of total element output which is ideal for dialing in a perfect rolling boil. Alternatively, in automatic mode, the PID algorithm manages the proportional output relative to process temperature, to hold a steady HLT or mash temp for instance. The eController quickly finds equilibrium with environmental heat loss characteristics, and can maintain a high degree of accuracy during each brewing process.
The heater button allows the user to cycle the element on or off without shutting down the power to the entire unit, or adjusting the PID output setting, which is especially helpful during the occasional boil-over. This feature also allows the controller to be used to monitor a process temperature, such as during runoff or latter stages of the sparge process without the risk of dry firing the element. Lastly, the controller features two accessory outputs, which would commonly be used for pumps, but could also be used for a mill, lighting, or even a phone charger.
Connectivity was an important consideration for our eControllers, we wanted the flexibility and familiarity of a plug that could be adapted to an existing customer supplied kettle or element, and the reliability of a UL approved connector type. For 240VAC main power and element connectors, we settled on the common NEMA L6-30 standard, which is a 3-wire twist-lock plug type, capable of delivering 30 amps of current. For the accessory connections, we settled on using a NEMA 5-15 standard, which is just a standard residential 120 VAC outlet. Finally, for the PT100 temperature probes we opted for the 3.5 mm mini jack connector standard, commonly used for headphones, which is both durable and easy to use.
Extruded Anodized 6061 Aluminum Housing
Omron Proportional PID Controller
Automatic and Manual Modes
On/Off Element control
PT100 temperature probe
240VAC L6-30 Plugs 30A GFCI circuit required
(2) 120 VAC Accessory receptacles
240VAC 30AMP GFCI Dedicated Circuit Required
Designed to be used with Ss Brewtech eKettles and RIMS. Use with other heating elements, especially (but not limited to) those of different wattages, can cause damage to the eController not covered under the warranty policy.
