With this adapter you can use a KOMOS CO2 regulator with a Nitrogen or Argon tank. Not all CO2 Regulators are suitable for use with a Nitrogen tank. Only for use with KOMOS regulator which is a dual gas regulator capable of handling Nitrogen and CO2 gasses. CGA320 male thread by CGA580 male thread. Compatible with KOMOS Dual Gauge and Dual Body regulators.
Faucet shanks allow you to mount a draft faucet just about anywhere. Typically installed in the door or wooden collar of of a converted fridge/freezer, the front of a cooler, or even in your house’s wall when constructing that ultimate home bar!
Once installed your beer line connects to the back of the shank and a faucet attaches to the front. Shanks are available in a range of sizes to accommodate mounting on materials of varying thicknesses.
The shank’s listed size refers to the total length of threaded pipe. Approximately 1 1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project.
Features a welded 3/16” barb and includes a glossy black plastic collar and locknut. Requires a 1” hole for installation.
Dimensions:
6-1/4" - Total Length (Tip to Tip)
5-1/2" - Shank Length (Without Nipple)
4-1/8" - Thread Length
5-1/4" - Pass Through Length
Kegerator draft line kit for a double tap tower.
Kit Includes:
Beverage line
Measures 4mm ID x 8mm OD (5/32" x 5/16")
1 x 5.5' length per tap
Gas line
Measures 5mm ID x 8mm OD (13/64" x 5/16")
1 x 8' length
Barbed tee fitting for splitting gas line
Hose clamps
Great for customizing and expanding your modular gas line manifold!
This Add On Assembly for a gas manifold is easy to add to your existing manifold setup. Gives you the ability to expand your setup without having to buy a new manifold. Includes a shut off check/ball valve, one tee and a connecting nipple.
This 6 in. chrome shank comes with a back nut, plastic collar, and a welded 1/4" nipple. Requires a 1" hole saw for installation.
Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. This is a Chrome Plated Brass unit.
Dimensions:
6-1/4" - Total Length (Tip to Tip)
5-1/2" - Shank Length (Without Nut & Nipple)
4-1/8" - Thread Length
5-1/4" - Pass Through Length
This beverage line jumper connects to the bev output on a standard U.S. D-style sanke keg coupler and to the back of a pass through shank on a jockey box. This is a direct replacement to the beverage jumper that comes with the KOMOS Jockey Box Connection Kits (D1760 & D1762). Specifications: 5 ft of 3/8" ID beverage tubing 3/8" Tailpiece and Tailpiece Elbow
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid September.
Plastic hand pump with sanke tap built in. Also known as a keg coupler, coupling, or adapter.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
1/4" tailpieces are ideally used with 3/16" draft line for a tight fit. If you'd prefer to use a different size tubing, the KOMOS S-style coupler for European kegs can also be purchased bare so you can mix and match your preferred tailpiece sizes.
The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port.
S-style sanke coupler
Stainless body
Stainless probe
PRV rated to 4.5 BAR (65 psi)
Replacement lever collar for Intertap or NukaTap faucets. This beer faucet part threads onto the lever and sits above the friction bonnet. Used to help adjust your tap handle to face forward if it is oriented at an angle when fully threaded onto the faucet lever.
Foam on Beer Detectors, or FOBs, are commonly used in commercial draft systems as a way to eliminate product waste and increase profits. When a keg completely empties and foam passes into the FOB it will shut off flow and in doing so keep the draft line completely full of beer until a new keg is tapped. This means you can hook a fresh keg and continue pouring without foaming issues, preventing you from wasting beer that is otherwise needed to refill the line and purge the system.
The FOB can also be used in homebrewing applications as a convenient way to purge kegs of oxygen. Check out video below where our friend Kee repurposes the FOB to move sanitizer from one keg to another and purge the keg of oxygen in the process.
Comes with 3/8" Duotight compatible barbs at the inlet and outlet, allowing you to easily hook up EVABarrier tubing with either a 9.5 mm joiner or 9.5 mm to 8 mm reducer (DUO113 / DUO105). If not using EVABarrier, simply clamp the line directly onto the barb.
Setup and Use:
Attach beverage line from outlet of keg coupler to straight inlet of FOB.
Attach beverage line from elbow outlet of FOB to faucet shank.
Connect fresh keg and push down purge button until the chamber fills with beer.
Push bottom knob in to lift float then pull out for normal operation.
Kegland Part number: KL00802
The KOMOS Cobra draft tower has a beautiful polished finish and features a built-in glycol loop for chilling. These towers are a gorgeous option for your tap room or home bar. The signature condensation on a glycol chilled draft tower will surely have your patrons thirsting for a pint! Of course, using the glycol loop is optional and isn't required to appreciate the striking design of the Cobra tower.
The towers come with female beer thread sockets and do not include shanks or faucets. We recommend the stainless Cobra Tower Shank and stainless Intertap forward-sealing faucets. When installing the shanks you will also need a tailpiece gasket to create a good seal.
For chilling the tower we highly recommend the KOMOS DraftMaster glycol chiller. This unit features a built-in submersible pump intended for pushing glycol or ice water through the Cobra tower's cooling loop. The pump can be turned on independently to circulate cooling solution constantly while you're serving from the tower, and then turned off when not in use. The DraftMaster also has 4 built-in draft coils that sit in the glycol reservoir, so you can serve from kegs at room temperature by passing the beer through the chiller on its way to your faucet.
Features:
Dual Tap
Glycol Loop
8mm OD stainless steel lines
Female Beer Thread (5/8" BSP) sockets for attaching shanks
Made from cast brass with chrome plating
Faucets and faucet shanks not included
Dimesnions:
Height: 14.16 inches from mounting plate
Width: 4.16 inches
1 inch OD
Please note: the beverage lines and glycol loop do not come marked. To identify them, blow air into the lines. If the air comes out of another line, that's the glycol loop. If the air comes out at the shank socket, it's a beverage line.
Please Note: When installing Cobra Tower Shanks onto the tower, some exposed threading is normal due to the tower's design and does not impact sealing performance. For a cleaner, professional aesthetic, we recommend using a shank spacer to cover the threads and provide a flush finish against the tower surface.
Counter top inline keg dispenser that can serve ice cold beer from unchilled kegs Compact and portable. Use anywhere you have access to 110V power Superior cooling capacity. Chill up to 8 gallons of beer, inline, per hour! Fill the reservoir with tap water, or use a glycol solution for optimal performance NukaTap Flow Control Faucets, tap handles, and drip tray included Great for bars, restaurants that need to add capacity These style chillers are how beer is poured in most European cafes If you're looking for a home draft system, but don't have the space for a kegerator or keezer, we've got the answer! The KOMOS KRYO benchtop keg dispenser can serve ice cold beer from unchilled kegs. It's essentially an electric jockey box that chills beer inline as it passes from the keg through the internal draft coils that sit submerged in the glycol reservoir. Simply place it on your counter or benchtop, fill the reservoir with a 20% glycol solution, and hook up your keg to the draft shank bulkheads. In roughly an hour, the reservoir will have cooled down enough that you'll be ready to pour! And thanks to the compact size, the KRYO can easily be transported from your home to the next backyard BBQ, cabin trip, wedding, or virtually any gathering of thirsty people you can think of. For homebrewers this would allow you to keep your refrigerator at fermenation temperatures while always seving your beer ice cold. Glycol Reservoir Although you can fill the reservoir with water only, for optimal performance we highly recommend using a glycol/water mix so you can lower the chilling solution below freezing. You simply won't be able to get your beer as cold if using water only. The sight gauge at the front will let you know if it's time to top up the reservoir, but also functions as a drain. When it's time to move the KRYO from one location to another, drain out the glycol into a sealable container to avoid spills during transportation. The glycol reservoir provides an exceptional amount of cooling power that makes it perfect for servicing small bars or cafes, as well as home use. If you're deciding between this model and the KRYO Nomad, note that peak chilling capacity for this model is approximately 8 gallons per hour, whereas the Nomad can chill up to roughly 2 gallons per hour. NukaTap Flow Control Faucets These stainless steel forward sealing faucets allow you to make instant adjustments to the beverage flow as you pour. A perfect faucet for those who often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Adjust the flow control level to dial in the flow rate and pour perfect pints every time! They also have the lowest thermal mass and best laminar flow design to further reduce foaming issues. Draft Shank Bulkheads The draft shank bulkheads with beer thread allow you to choose the type of fittings and draft line that best suits your needs. We highly recommend EVABarrier draft line and Duotight fittings—the same lines and fittings that come standard with our KOMOS Kegerators. These Duotight Female Beer Thread Adapters will allow you to hook up 8 mm OD EVABarrier, and also work with sanke keg couplers if you'll be dispensing commercial kegs. For homebrew kegs, we recommend Duotight Flare Adapters for your QDs, or if you're starting from scratch, consider the Duotight Ball Lock Quick Disconnects. Includes: (2) NukaTap Stainless Flow Control Faucets (2) Tap Handles Stainless Countertop Drip Tray w/ Removable Grill Features: Chill 8 gallons of beer per hour (based on 68°F ambient) Draft shank bulkheads compatible with Duotight fittings or nut & tailpiece combos STC-1000 temperature controller (reads in °C) Reservoir volume: 4.2 gal Voltage: 110V-120V Current: 0.9A Frequency: 60Hz Dimensions: 19" x 12" x 17.5" (not including faucets / drip tray) CE Certified Reservoir Temp Controller: Follow these steps to adjust the SET temperature on the controller. If using water only, be sure to keep the reservoir temp set at or above 2°C to avoid freezing. With a 20% glycol solution, you can set the temp as low as -2°C. The reservoir volume is 4.2 gallons, so you will only need to purchase 1 gallon of glycol to make a 20% mix. Hold the 'Up" button for 3 seconds until the number is flashing While the number is flashing, press the 'Down' button to decrease the set temperature or press the 'Up' button to increase the set temperature. Wait 3 seconds and the controller will save the setting and return to normal operation mode. Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer.
The CMBecker Inline Flow Control 7mm Barb is necessary for those looking to use tubing that has an inner diameter of 5/16 or 3/8" Use with CMBecker In-Line Flow Control Compensator Stainless steel nipple, only stainless steel touches your beverage Works with CMBecker International shanks. Includes CMBecker beer nut The size is 7mm which is slightly wider than 1/4" at 0.27" This will not work with a standard shank, it works with CMBecker shanks.
Portable, Inline, Keg Dispensing unit that can be powered via 110V outlet Replaces a traditional Draft Box/Jockey Box with no ice required Differs from the regular Komos Kryo Inline Chiller in that there is no glycol reservoir / The Nomad is liquid-free and easier to transport Can chill up to 2 gallons of room temperature beer, inline, per hour NukaTap Flow Control Faucets, tap handles, and drip tray included Mobile draft dispensing has never been easier with the KRYO Nomad electric keg dispenser. As with a jockey box, beer is chilled inline as it passes from the keg through the internal draft coils which are chilled by the electrically powered solid carbon based heat sink. With a standard 110V outlet, you can serve ice cold beers from an unchilled keg, and unlike the KRYO glycol unit, this model is absolutely liquid-free, making it the ideal choice for mobile draft dispensing. No need to wait an hour for glycol solution to chill, once you power on the Nomad, you'll be ready to go in as little as 15 minutes! Carbon Heat Sink The secret to the KRYO Nomad's incredible chilling capacity and portability is the solid carbon based heat sink. This heat exchange technology requires no liquid whatsoever, so you'll never run into issues with emptying or spilling coolant when you transport this chiller from place to place. It provides roughly 300 watts of cooling power which allows you to chill about 2 gallons of beer per hour. Just be sure to give the unit about 2 minutes to recover for each 16 oz pour. The Nomad is very power efficient, drawing only 60 watts of power when the compressor is running. When idling, the chiller uses only 1.6 watts of power, meaning it it averages only 15 watts of power draw when turned on and periodically cycling the compressor. NukaTap Flow Control Faucets These stainless steel forward sealing faucets allow you to make instant adjustments to the beverage flow as you pour. A perfect faucet for those who often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Adjust the flow control level to dial in the flow rate and pour perfect pints every time! They also have the lowest thermal mass and best laminar flow design to further reduce foaming issues. Duotight Bulkheads Draft lines connect directly to 8 mm Duotight bulkheads located at the rear of the unit. To hook up your kegs to the KRYO Nomad, we highly recommend EVABarrier draft line and Duotight fittings—the same lines and fittings that come standard with our KOMOS Kegerators. 8 mm OD EVABarrier plugs directly into the bulkheads, then depending on what type of kegs you'll be pouring, you can use these Duotight Female Beer Thread Adapters for sanke keg couplers if you'll be dispensing commercial kegs, or for homebrew kegs, we recommend Duotight Flare Adapters for your QDs, or if you're starting from scratch, consider the Duotight Ball Lock Quick Disconnects. Includes: (2) NukaTap Stainless Flow Control Faucets (2) Tap Handles Stainless Countertop Drip Tray w/ Removable Grill Features: Chill 2 gallons of beer per hour (based on 68°F ambient) Duotight bulkheads compatible with 8 mm OD EVABarrier tubing AC Voltage via IEC Plug: 110-120V Max Power Draw: 300W Dimensions: 9.25" x 13.7" x 18.1" (not including faucets / drip tray) CE Certified Temp Controller: Follow these steps to adjust the SET temperature on the controller. Press and release the 'SET' button to enter into the user menu. Press 'SET' will display the value of the target temperature setting. Press the 'Up' or 'Down' button to increase or decrease the set temperature. Press the snowflake icon button or wait 30 seconds and the controller will save the setting and return to normal operation mode. Warning: Do not set the temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.
Add the convenience of quick disconnects to your commercial sanke couplers. The K-Lok QD system will allow you to easily connect and disconnect your draft lines from your keg coupler with no spilling or loss of gas. This K-Lok Male x Male Beer Thread (5/8" BSP) is designed to be attached to your beverage line and then connected to the K-Lok Female fitting attached to your keg coupler's bev out port. The built-in check valve prevents liquid from draining out of your beer line when it's disconnected so it's a dry break. Draft lines can be connected to the Male Beer Thread end using a Duotight Adapter for EVABarrier tubing or Hex Nut & Tailpiece for other draft tubing. KegLand Part Number: KL04930
Keep your draft faucet in perfect working order.
Replace the washer that seals the sliding shaft of your faucet to prevent leaks
With this washer you can renew a worn-out part on your well-used draft faucet. This washer seals the sliding shaft, which often becomes brittle with age causing the faucet to drip.
This is the kit for those who have an extra refrigerator and want draft beer on tap, but either can't drill a hole in the refrigerator or would like to save almost $60 when compared to the deluxe kit. We include a hand held beer line assembly instead of a faucet, shank, and drip tray.
Kit Includes:
New Aluminum CO2 tank
Dual gauge regulator
Hand held beer line assembly
Sanke keg valve tap
All hoses and clamps
The Most Essential Barrel Accessory!
Keep your wine safe and ensure the integrity of your barrel with this top-up system. We're all familiar with the fact that barrels lose volume over time - in fact the evaporation that leads to this is one of the benefits of aging wine in a barrel. However, let it go too far with out topping up and the excess headspace in the barrel will cause your SO2 levels to drop and open the door to oxidative or bacterial spoilage. That is why it is essential to keep your barrel topped up at all times!
Our MoreWine! Topping system is based around the common 5 gallon Cornelius ("Corny") Keg. These kegs are relatively inexpensive, simple to work with and easy to get parts for. 5 gallons of topping wine is about the right amount to work with a new 30 gallon barrel. The best part about topping up your barrel from a keg is that the wine that remains in the keg is always protected by a layer of the inert gas that you used to push the previous wine out, so it doesn't matter how long the wine sits in the keg!
This kit includes the Argon/Nitrogen tank and regulator for you to push the wine out of the keg, and all the tubing and other parts that you need to make it work, as well as comprehensive instructions.
Kit Includes:
New High Quality Italian 5 gallon "Corny" keg
20 cu. ft. Argon/Nitrogen tank
Argon/Nitrogen regulator
Tubing and hardware to connect the gas regulator to the keg
Tubing and hardware to dispense wine from the keg into your barrel
Cleaning brush for your dispense line
Comprehensive instructions for assembly and use
If you're serving beer from a hand held faucet and are looking to upgrade your kegerator system this is your kit. All you need is a 1" hole saw to drill a hole and your ready to assemble. Easy!
Comes with:
D1255 - Faucet,Knob, and Shank Combo
D1480 - Economy Drip Tray
D1700 - 5 feet
H950 - Hose Clamp Qty.2
KEG700- Beverage Out Ball Lock
You save 10% buying this complete kit rather than piecing it all together separately. Cheers!
Please Note: Keg Not Included
This black plastic faucet is made in Germany and assembled in the United States. It is a very durable faucet made of the same food grade plastics as the CMB Disconnects. It features a stainless steel lever that will hold up to commercial handles.
Black plastic body features a durable stainless steel lever
Plastic spring-loaded shaft and chrome-plated brass bonnet and collar
Standard threading is compatible with most branded tap handles
Easy to clean design. Disassembles in seconds. Features food grade plastics for sanitary use with all beverages.
Spout is removable and can be replaced with shorter spout for beer
Used in commercial applications, bars and restaurants all over the world!
This faucet is made in Germany and assembled in the United States. It is a very durable faucet made of the same food grade plastics as the CMB Disconnects. It features a stainless steel lever that will hold up to commercial handles. The creamer faucet lets you top a glass of beer with a perfect head for a great-looking presentation. Simply pull the lever forward to pour; then push it back to finish with a creamy head.
Black plastic body features a durable stainless steel lever
Plastic spring-loaded shaft and chrome-plated brass bonnet and collar
Standard threading is compatible with most branded tap handles
Features a "Creamer" action when handled is pushed back. Emulates the fine foam of a stout faucet.
Easy to clean design. Disassembles in seconds. Features food grade plastics for sanitary use with all beverages.
Spout is removable and can be replaced with longer spout for wine.
This faucet can be used interchangeably for beer or wine.
Used in commercial applications, bars and restaurants all over the world!
The X1 Faucet has been used for many beverage dispense applications over the years including beer, soda, carbonated water and other beverages. This faucet is a great choice when you need to dispense very cold beer that might freeze a metal faucet. This configuration features a standard faucet lever, and an Allen Key Security flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Allen Key Security Adjustment Food Grade (NSF Approved) plastic and stainless steel Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in "Creamer" function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.
Keep your catch of the day fresh with the Igloo® Marine Ultra 54 Quart Cooler. It’s designed with Ultratherm® insulation for optimal cooling performance and has an integrated fish ruler on the lid. The marine-grade design can withstand to the wet conditions and features rust-resistant stainless steel screws, ultraviolet inhibitors, and a stainless steel hinged latch.
Features:
Ultratherm® insulated lid offers cooling performance
Holds 83 cans
Features an integrated fish ruler on lid
Ultraviolet inhibitors protect the cooler against sun damage
Rust-resistant stainless steel screws and lid strap
Stainless steel hinged latch
Recessed triple-snap drain plug makes clean up simple
Marine-grade hinges
Non-slip grip handles provide comfortable carrying
Capacity: 54 Quart
Dimensions: 26.375” x 15.5” x 15.5”
Weight: 8.1 lbs.
Manufacturer’s warranty: 1-year
Country of Origin : United States of America
Style : 44683
DSG Pro Tips
Brand : Igloo
What's cooler than being cool? Ice Cold. And that's just what your beer will be when stored in the KOMOS Rubicon Cooler. With durable rotomolded body, high density polyurethane insulation, and compression seal lid, the Rubicon will hold ice for days on end, even in the hottest of climates. Rotomolding is a procedure that ensures every part of the cooler is made with a continuous thick wall with minimal imperfections. This makes the cooler extremely tough, and is one of the features that have made YETI® coolers such a hit. The Rubicon is the ideal sidekick for camping trips, tailgaters, beach days, or wherever else you want to enjoy a cold beverage that tastes like it came straight out of the fridge. If you're designing your own jockey box, we highly recommend the Rubicon Cooler. High density polyurethane foam walls offer superior insulation compared to cheaper ice chest options, which means ice will hold for far longer and ensure your draft box doesn't warm up before you're done pouring beers. We love this cooler paired with the KOMOS Slimline Cold Plate, which will allow you to chill the beverage you're serving while still having plenty of room to store other food and drinks. Features: Rotomolded body High density polyurethane insulation Lockable compression lid with high quality seal Polyester rope handles with molded grips Side drain outlet Rubber feet Capacity: 44 x 12 oz cans (2 layers standing) 30 x 16 oz cans (1 layer standing, 1 layer laid down) Both configurations will have plenty of room for ice! Specifications: Internal dimensions - 18" long x 11" wide x 12" deep External dimensions - 23.25" long x 16.25" wide x 16.5" tall Empty weight - 22.75 lbs 35 Liters (9.25 Gallons)
Looking for a premium kegerator to install under the counter of your home bar or outdoor kitche? The KOMOS Outdoor Kegerator offers the best value in the USA for an all stainless steel outdoor rated kegerator. With an all stainless interior and exterior, this unit is built to operate at a level other kegerators simply can't reach. Heavy duty casters come standard for maximum mobility, and front facing ventilation makes it ideal for using as a built in kegerator in an outdoor kitchen. Features include tower cooling fan, wide-range digital controller, stainless door and exterior, stainless floor and interior, heavy-duty casters as standard, and a list of options.
Please note the kegerator does not come with a plug for the tower hole. The KOMOS Kegerator is intended to be installed under counter tops or paired with a standard 3" diameter draft tower.If you plan to install the kegerator under a countertop, the top cover will need to be removed and you will need to install the Build-In Door Hinge, as the top door hinge is removed with the cover.
For homebrewers looking for a temperature controlled fermentation chamber, we recommend the KOMOS residential model.
Best Choice for Outdoors
With its stainless steel construction and powerful compressor this Komos Kegerator is the best choice for outdoor kitchens, bbq islands, or poolside placements. The forward-facing vents at the bottom of the kegerator allow this unit to be installed under counter without having to leave 2-3 inches on each side of the kegerators as is required with some other models. The model also features more power than the standard residential version and can stand up to ambient temperatures up to 104°F. You will want to place your kegerator in a position to be protected from rain.
Easy to Clean
The stainless steel countertop drip tray looks great and couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Best Value & Backed by MoreBeer!
We've looked around, and when you factor in fast and free shipping, you are getting the very best value on an all stainless steel kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. In the rare and unfortunate scencario your unit arrives damaged just call us up and we will work with you to take care of it.
Feature Summary:
Digital Thermostat with wide 28 - 76° F temp range.
CO2 Tank strap mounts above a triangular stage inside the kegerator
Tower cooling fan
Efficient and powerful compressor uses R600 refrigerant
Beautiful stainless interior and exterior
Stainless Steel Countertop Style Drip Tray
Stainless Steel Floor for additional keg support
Heavy duty rolling casters come standard
Front-facing ventilation allows it to be built-in to a cabinet, kitchen, or outdoor counter
Lock & key to keep your precious beverages protected
UL & CSA Certified
Detailed instructions on assembly and use
Specifications:
24" Wide
25" Deep
35" Tall (fridge only)
39.25" Tall with Caster Wheels
115V - 60 hz
1.6 Amp draw
Works well in ambient temperatures up to 100°F
Internal Dimensions:
21" Wide
18.25" Max Depth
28.5" Tall
27" clearance under controller
What Fits:
2.6 Gal. BrewKeg - 2
5 Gal. Torpedo Keg - 3
5 Gal. Slimline Torpedo Keg - 3
5 Gal. Megamouth Torpedo Keg - 2
5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 3
5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1
7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 2
15.5 Gal. Half Barrel Keg (Full Size Keg) - 1
See below for the Kegerator Instruction Manual.
Sometimes a single draft tower isn't enough for your dream home bar or kegerator. If you're building out a draft system that will have more than four faucets, we highly recommend the KOMOS Double T Bar Draft Tower. Available in 6-tap and 8-tap models, these towers provide ample room for your faucets and will give your draft setup a much cleaner look than having multiple single-column towers. Perfect for upgrading an existing KOMOS Double-Wide Kegerator with two individual towers or designing your own home bar or kegerator. Mounting hardware, tower collars and gaskets included. The tower does not include faucets, shanks, tap handles, or draft tubing. Assembly To assemble the tower, remove the dust caps on either side and remove the foam insulation. Start with the inner most shank hole on either side and work your way outward. We recommend installing each shank and attaching the draft tubing before moving on to the next shank hole. The top section of the tower is 5" in diameter, so most people should be able to reach inside to install the shanks by hand or with the help of a draft wrench. When all the shanks have been mounted, reinsert the foam insulation. The tower may come with more insulation than needed and may need to be cut thinner before reinserting. We recommend using the Double Offset Shank Wrench to help with assembly. Duotight Compatible Tower Shanks We highly recommend pairing the draft tower with Intertap Tower Shanks with Duotight Compatible Barb. When it comes to assembly, there's nothing easier than Duotight push-to-connect fittings, and the same goes for whenever you might need to disassemble a line for cleaning. Duotight fittings pair perfectly with EVABarrier draft tubing, our preferred beer & gas tubing that offers superior protection from oxidation, CO2 loss, and microbial growth. Tower Dimensions: 29.5" L x 5" D x 16" H. The centers of the columns are approximately 16" apart. Not compatible with the KOMOS Olympus III kegerator.
The X1 Faucet has been used for many beverage dispense applications over the years including beer, soda, carbonated water and other beverages. This faucet is a great choice when you need to dispense very cold beer that might freeze a metal faucet. This configuration features a standard faucet lever, and a lever flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Lever Adjustment Food Grade (NSF Approved) plastic and stainless steel Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in "Creamer" function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.
An adjustable pressure relieve valve with a range from 0 to 30 psi. Made from stainless steel this is non-threaded and designed to be welded in place. For a 1/4" MPT option see D1833L.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
The MoreBeer! kegerator conversion kit ships free to the lower 48 states! Convert any refrigerator large enough to hold a keg into a kegerator with our easy to install kit. We include a simple, but what we think is necessary, upgrade a high quality stainless drip tray to eliminate messy drips from hitting your floor. The whole kit is simple to install with the included instructions.
Kit includes:
New Aluminum 5 lb CO2 tank
High quality dual gauge regulator
Beer faucet, knob and shank
Beer line & connectors
Gas line & connectors
Stainless steel drip tray
Sanke keg valve tap
Instructions.
CO2 tank is required by law to be shipped empty. You will need to find a local source, such as a welding supply, to fill your CO2 tank.
Note About Freezer Installations:
If you plan to mount on a freezer you need to see where the coolant lines are located insite the wall so you don't damage during installation. Plug the unit in with the lid open and you will see the lines form condensation on the inside. (... drill a hold where there are no lines!)
A deluxe quality drip tray gives your setup a professional look and makes cleanup a snap!
The Deluxe Stainless Counter-Top Drip Tray has a louvered splash grate and can be easily cleaned in the dishwasher or sink. The 8" width easily accommodates a double faucet tower. Rubber feet hold the tray securely and protect your counter from scratches.
Deluxe features include a brushed finish 304 stainless steel, which is more expensive and difficult to work with - but looks beautiful. We carefully TIG weld the corners instead of sealing with a bead of silicone, or over-welding and then grinding which destroys the finish.
Designed by MoreBeer! & Made in the USA.
8 1/4" Wide x 5 3/8" Deep x 3/4" Tall
Keep your draft faucet in perfect working order!
Replace your old or broken friction bonnet to keep your fauce lever moving properly
This friction Bonnet is the piece that sits between the Faucet and the Faucet Knob Lever Collar. Tightening it compresses a washer and creates resistance when opening and closing the faucet.
You're in college and you would rather spend your money on more beer than a fancier tap. We get it. The Pony Pump is a compact air pump that fits any American sanke style keg. It is lightweight, has a pressure relief vent, 2' length hose and a plastic faucet.
Also known as a keg coupler, coupling, or adapter.
If you're serving beer from a hand held faucet and are looking to upgrade your kegerator system this is your kit. All you need is a 1" hole saw to drill a hole and your ready to assemble. Easy!
Comes with:
D1255 - Faucet,Knob, and Shank Combo
D1480 - Economy Drip Tray
D1700 - 5 feet
H950 - Hose Clamp Qty.2
KEG740- Beverage Out Pin Lock
You save 10% buying this complete kit rather than piecing it all together separately. Cheers!
Please Note: Keg Not Included
G-Type keg coupler for Anchor Steam and some other European kegs
Pull-to-engage ergo lever handle
Includes 3/8" OD barb for gas inlet
Bass G style keg tap, also known as, keg coupler, coupling, or adapter. Fits Anchor Brewing kegs.
Will also fit:
Abbot Ale
Anchor Liberty Ale
Anchor Porter
Anchor Steam
Bass Pale Ale
Blackthorne Cider
Caffrey's
Fuller's ESB
Fuller's London Pride
Grolsch
Old Speckeled Hen
Rouge
Scottish Tennents
Sir Perry William's
Watney's
Young's
Young's Chocolate Stout
Young's Oatmeal Stout
Young's Ram Rod Bitter
Young's Special London Ale
This plastic faucet with a burgundy finish is made in Germany and assembled in the United States. It is a very durable faucet made of the same food grade plastics as the CMB Disconnects. It features a stainless steel lever that will hold up to commercial handles.
Burgundy plastic body features a durable stainless steel lever
Plastic spring-loaded shaft and chrome-plated brass bonnet and collar
Standard threading is compatible with most branded tap handles
Easy to clean design. Disassembles in seconds. Features food grade plastics for sanitary use with all beverages.
Spout is removable and can be replaced with shorter spout for beer
Used in commercial applications, bars and restaurants all over the world!
The V10 stainless steel flow control faucet is designed and produced in Germany with some assembly completed in the United States. This faucet contains technology such as the "Closed Piston Chamber with Encapsulated Compression Spring" that allows for a perfect forward seal on the faucet, no beer trapped in dead space to cause the lever to stick, and the ability to push the faucet backwards for an extra creamy head. The compensator itself has an extra long cone for a wider range of compensation and designed to eliminate uncontrolled shifting of the compensator cone. This configuration features a black standard faucet knob, a polished stainless steel faucet lever, and a lever flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in “Creamer” function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.
