Counter Pressure Bottle Fillers

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid January.   Have a keg of beer, but want to fill some bottles to take with you to the game, beach, or friend's house? The BeerGun is a great way to fill bottles from a keg. Every part that comes into contact with your beer is stainless steel. This unit features a CO2 purge, which helps to prevent oxidation during filling. Includes tubing and a brush for cleaning. The Version 2 BeerGun will soon become the standard for rapid handheld bottling.  This new model features an ergonomic handle, with valve controls placed conveniently at your fingertips.  This upgrade is easier to clean, and even easier to use.  If you've used other bottlers, but been disappointed by confusing controls or foaming, then this is the Bottle Filler for you. What's New: Ergonomic warm-touch grip with ambidextrous thumb actuated CO2 valve Positively retained beer gun seal tip - no more lost tips! Anti-microbial beer hose keeps contamination at bay! Accessory kit  now included as standard item Tool free super fast disassembly Made in the USA! Note: Regulators and "Y" fittings are not included with the product. You need two gas sources, so a dual output MFL regulator is ideal.  You can add a second output to your regulator by adding a "Y" Fitting and 2 shutoffs.  You can also cut your line and add a barbed "T" or use a manifold.

Read more less

The Tapcooler Counter Pressure Bottle Filler is an all-new, easy-to-use bottling device! Allows you to perfectly bottle beer from a forward-sealing beer faucet without CO2 loss Purge bottles and headspace with CO2 to keep oxygen out, prolonging the life of your beer Perfect for bottling for competitions, sending bottles home with friends, or to take on the go! Easy to setup and super easy clean. For a Duotight-compatible filler, check out the NukaTap Counter Pressure Bottle Filler The Tapcooler Counter Pressure Bottle Filler is the best way to quickly and easily fill bottles of homebrew directly from your draft system. No need to mess with alternate liquid lines or other complex contraptions. Just slide the Tapcooler into any forward sealing faucet (such as a Perlick, Intertap, or Nukatap) hook up a CO2 line, and you're ready to roll. Whether you're filling bottles for a competition or just grabbing a couple to share with your friends, the Tapcooler is quick and easy to use, and will help maintain the flavor, aroma, and carbonation level of your beer so it tastes the same out of the bottle as it would out of the tap. A counter pressure bottle filler is the best tool for bottling, as the bottle is under pressure while the carbonated beer flows in, which results in a minimal loss of the CO2 in solution. The Tapcooler improves upon the standard counter pressure filler, as it plugs directly into your draft faucet. Other counter pressure solutions require you to hook up a separate liquid line, which is not something standard draft systems have setup and requires additional time to prep. With the Tapcooler, you can have it setup and ready to go in less than a minute! The Tapcooler design is also advantageous because after you are done filling the bottle, it stays in place hooked up to your faucet while other fillers require you to set the unit aside and pick it back up again for the next bottle. Connecting your CO2 line is also a snap. You can either hook up directly with a 3/16" push-fit line, or connect your line to the included barb fitting. You can also purchase the gas ball lock adapter (KEG881), which gives you the ability to attach a gas-in disconnect directly to the filler unit. We highly recommend picking up this optional accessory! The Tapcooler is designed to fill beer and CO2 from the bottom of the bottle through the telescoping bottle connection tube. First CO2 flows down into the bottom of the bottle to flush from the bottom up. Next you open the tap and beer flows down the same tube, filling from the bottom up. The result is a more effective purging of oxygen and little to no foam during the filling process. The telescoping bottle connection tube allows you to fill bottles as small as 4.5" tall and up to 12.5" tall. You can fill taller bottles with the Tapcooler, but the tube will not reach the bottom of the bottle, which can lead to some splashing. When filling wide mouth containers, a bottle stopper of suitable size and with a 9 mm hole can be used as an adapter. The filler features a push button CO2 purge valve, which allows you to purge the bottle of oxygen before and after filling. It also includes an adjustable pressure relief valve, giving you the ability to change the filling speed. The pressure relief valve also acts as an overflow port for excess beer or foam to escape when filling. One of the best features of the Tapcooler is that it's super easy to clean. Cleaning other bottle fillers can be a chore and take lots of time. The Tapcooler comes apart easily and allows you to clean all parts effectively and easily after each use. All metal parts that come into contact with your beer are made from 304 stainless steel. The barb and ball lock CO2 adapters are made of aluminum. Finally, the Tapcooler comes chock full of optional accessories that will adapt your filler perfectly to your setup. See the "You Might Also Need" section below for list of accessories! Forward-Sealing Faucet Compatibility Tapcooler fits Intertap, Nukatap, Ultratap, Vent-Matic, and Perlick 600 series faucets. These fillers can be converted to fit Perlick 500 series with the optional tap connector (KEG887). Cannot be used with ventilated beer taps, i.e. non-forward sealing beer taps. Features: Hooks up directly to any forward sealing faucet for quick and easy use. Quick setup and easy maintenance. Perfect for bottling for competitions, sending bottles home with friends, or just to have some bottles on the go! A range of accessories are offered for more range and easier use! Purge bottles with CO2 before and after filling for longer lasting beer! Pressure relief valve allows for control over filling speed and allows excess foam to escape for the perfect pour every time! Made from 304 stainless steel Easy to use and clean!  

Read more less

Unbeatable value for a homebrew counter pressure bottle filler! Fill bottles directly from your keg with virtually no CO2 loss Purge oxygen from bottles before filling to preserve the quality of your beer Accessory set included for multiple connection options — no expensive add-on items needed! Duotight connections offer unparalleled customization and adaptability to your specific needs Compatible with forward-sealing faucets — NukaTap, Intertap, Perlick 600-series and others Running late but don't want to leave home without a couple of bottles of your latest creation? The Nukatap Counter Pressure Bottle Filler will have your precious cargo packed and ready at the drop of a hat! Slip it right into the nozzle of your Nukatap, Intertap, or other forward-sealing faucet to fill bottles right from the tap. Gas can be quickly connected using a bare end of 8 mm OD EVABarrier tubing, or connect the included Ball Lock Adapter to hook up gas using a Ball Lock Quick Disconnect. Not enough room under your draft tower? No problem! Like the gas-in port, you can swap out the push-in spout for the Duotight adapter, allowing you to connect tubing directly to the filler, or connect a Ball Lock Post Adapter and use a Ball Lock jumper line to fill right off your keg. While other fillers on the market force you to purchase upgrade accessories to improve functionality, the Nukatap Filler gives you more options to fill right from the get-go. This unit is designed to fill multiple sizes of beer bottles up to 500 mL thanks to the telescopic filling stem. We recommend starting with it fully extended, then insert the stem till your at the bottom of the bottle, purge the bottle with CO2, then press the stem all the way in to form a seal on your bottle. Counterpressure filling is the absolute best option for packaging beer from your keg without affecting its quality. Filling a growler straight from the tap is always an option, but if you want your beer to be at its best when you share it with the world, this is only way to go. The Nukatap Filler will make sure your brew doesn't pick up oxygen or lose carbonation in the filling process, keeping your creation in tip-top condition Includes: All stainless steel counter pressure filler Push-in spout compatible with forward-sealing faucets (2) 8 mm Duotight adapters for filler and NukaTap spout (2) Ball Lock Post Adapters (Red / Yellow) 19.5" length of 8 mm OD x 5 mm ID EVABarrier tubing KegLand Part Number: KL21760  

Read more less

The counter pressure bottle filler that sets the standard for filling beer bottles at home.  With a unique one way valve and adjustable pressure relief you will be bottling sediment free homebrew with ease.   If you currently carbonate and store your homebrew in kegs, you can use a counter pressure filler to bottle beer directly from your kegs. One huge advantage of this method is that since you are bottling already carbonated, clear beer, there will be no sediment at the bottom of your bottles. Counter pressure bottle filling is how a brewery bottles beer. The bottle is under pressure while the carbonated beer flows in. Because the interior of the bottle is pressurized there is minimal loss of the CO2 in solution. The opposite of filling under pressure is when you pour a beer into a pint glass where CO2 erupts out of solution creating all that foam. Great in your glass but not good when you are trying to bottle carbonated beer. Our counter pressure filler mimics a single filling head on a professional bottling line, a concept that we all know works very, very well. Made by Fermentap, the design has two unique features. Number 1 it is the only model made entirely from stainless steel. Number 2 you flush and fill from the bottom of the bottle. Beer barb is 3/16". Gas barb is 5/16". Features While some models flush the bottle from the top and fill from the bottom, our unit features a special valve that allows CO2 and beer to flow down the same stainless tube, directly to the bottom of the bottle. First CO2 flows down into the bottom of the bottle to flush from the bottom up. Next you switch the valve position and beer flows down the same tube, filling from the bottom up. The result is a more effective purging of oxygen and no foam during the filling process - not to mention that the whole thing takes one-hand to operate! Why hope that you flushed your bottle properly using a type of beer gun, when you can know for sure that you have created the best environment for your beer to be stored at by using a Counter Pressure Bottle Filler? More Details The unit is inserted into the bottle in the off position. The valve is then turned to CO2 to flush the bottle and then to beer for filling. The adjustable pressure relief on the side of the unit allows you control the speed of fill by adjusting the pressure in the bottle. The valve is positioned in such a way that it is easy to use with one hand, while the other holds the bottle. This model is designed for 12oz bottles but can easily be extended to accommodate larger bottles, such as 22oz, with a small piece of 1/4" tubing. Setting Your PSI Pressure Before you counter pressure fill a bottle make sure you are satisfied with the carbonation level and flavor. The goal for counter pressure bottle filling is to store your beer in the most sanitary and clean environment possible so when you get ready to share your homebrew its presentation is perfect when you go to pour. An ideal set point to set your PSI level on your regulator is 10-14 psi. This range is dependent upon the temperature of your beer and the carbonation level. We recommend you start at a lower pressure around 10psi for the first 2-3 bottles to make sure you get everything dialed in before committing to filling a whole case. Make sure your keg is always kept cold. If your keg warms up you will have foaming issues.     

Read more less

We think our Counter Pressure Bottle Filler is the best on the market, and the Deluxe Counter Pressure Filler takes a proven design to the next level by adding a pressure gauge for monitoring bottle pressure and flared connections for easy cleaning. The gauge on this counter pressure bottle filler allows you to know the pressure in your bottle, an incredibly handy feature. The flared connections allow for easy cleaning as you can connect on or disconnect your lines in a matter of seconds. Traditionally these lines can be difficult to sanitize because they were permanently connected with hose clamps. Still has all the great feature of our original All Stainless Construction (except for a brass backing on the pressure gauge) A true Counter Pressure Filler (for less foaming) Easy to use Stainless 3-way ball valve on top Adjustable Stainless pressure release on side Flushes bottle from the bottom not the top What is a Counter Pressure Filler? If you currently carbonate and store your homebrew in kegs, you can use a counter pressure filler to bottle beer directly from your kegs. One huge advantage of this method is that since you are bottling already carbonated, clear beer, there will be no sediment at the bottom of your bottles. Counter pressure filling is how a brewery bottles beer. The bottle is under pressure while the carbonated beer flows in. Because the interior of the bottle is pressurized there is minimal loss of the CO2 in solution. The opposite of filling under pressure is when you pour a beer into a pint glass where CO2 erupts out of solution creating all that foam. Great in your glass but not good when you are trying to bottle carbonated beer. Our counter pressure filler mimics a single filling head on a professional bottling line, a concept that we all know works very, very well. Features While some models flush the bottle from the top and fill from the bottom, our unit features a special valve that allows CO2 and beer to flow down the same stainless tube, directly to the bottom of the bottle. First CO2 flows down into the bottom of the bottle to flush from the bottom up. Next you switch the valve position and beer flows down the same tube, filling from the bottom up. The result is a more effective purging of oxygen and no foam during the filling process - not to mention that the whole thing takes one-hand to operate! Why hope that you flushed your bottle properly using a type of beer gun, when you can know for sure that you have created the best environment for your beer to be stored at by using a Counter Pressure Bottle Filler? More Details The unit is inserted into the bottle in the off position. The valve is then turned to CO2 to flush the bottle and then to beer for filling. The adjustable pressure relief on the side of the unit allows you control the speed of fill by adjusting the pressure in the bottle. The valve is positioned in such a way that it is easy to use with one hand, while the other holds the bottle. This model is designed for 12oz bottles but can easily be extended to accommodate larger bottles, such as 22oz, with a small piece of 1/4" tubing. Setting Your PSI Pressure Before you counter pressure fill a bottle make sure you are satisfied with the carbonation level and flavor. The goal for counter pressure bottle filling is to store your beer in the most sanitary and clean environment possible so when you get ready to share your homebrew its presentation is perfect when you go to pour. An ideal set point to set your PSI level on your regulator is 10-14 psi. This range is dependent upon the temperature of your beer and the carbonation level. We recommend you start at a lower pressure around 10psi for the first 2-3 bottles to make sure you get everything dialed in before committing to filling a whole case. Make sure your keg is always kept cold. If your keg warms up you will have foaming issues. 

Read more less

These quick disconnects feature 1/4" barbed fittings which can be used with either 3/16", 1/4" or 5/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you need not worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade buna-n. For the female side, see our H550B.

Read more less

Savvy homebrewers love quick disconnects on their gas lines! They give you the ability to quickly move hoses from one configuration to another with ease!   These quick disconnects feature 1/4" barbed fittings which can be used with 3/16", 1/4" or 5/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you don’t need to worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade Buna-N.   In short, these QDs are durable, user friendly and versatile. A no-brainer! For the male side, see our H550A, or buy both sides together as a set.

Read more less

This is a replacement stopper for our Counter Pressure Bottle Fillers.  This will work with both KEG801 & KEG804.  Stopper - #2.5 with 3/8" hole.

Read more less

Connects your new Counter-Pressure filler to your existing ball lock kegging system with a convenient, sealing quick-disconnect system. Having everything you need all in this kit makes set-up & use of your counter-pressure filler easier. If you have the Counter-Pressure bottle filler then this set is a must have!   Includes: Hardware to connect filler to gas system: Gas line tee, quick disconnect set, 6' of gas line.   Hardware to connect filler to keg: Threaded, black Beverage-Out Quick Disconnect, related flare fittings, 5' of beer line.   To Install: Shut off your gas. Cut your existing gas line assembly and clamp the Co2 Tee in that place. Clamp the gas line and beverage line to the Bottle Filler. Gas line on the larger barb fitting, beverage on the smaller barb. Make sure the counter pressure filler is closed by placing the valve handle perpendicular to the valve. Attach the beverage ball lock quick disconnect to your keg. Never attach a beverage out fitting to your keg without it being in a closed system. Connect the gas line quick disconnect. Finally turn your gas back on. You're ready to fill.

Read more less

The next generation WilliamsWarn BrewBottler. This counter-pressure bottle filler allows you to bottle from a ball lock homebrew keg without losing any carbonation. The BrewBottler can accommodate bottles up to approximately 330 mm (13") in height and 150 mm (5.9") in diameter. This allows a variety of bottle types to be used, including bottle sizes up to 3L (101 oz.). Filling Once the gas and beverage hoses are connected via the simple push-lock fittings on top of the valve, you just open the gas side for a few seconds to pressurize the bottle and purge air, close that and then open the beverage side to allow beverage to enter. With back-pressure in place, the beverage fills without foaming issues or carbonation loss. Pressure release and therefore fill flow rate are controlled by how open the variable pressure valve is set. A 500ml bottle (1 US pint) can be filled in 40 seconds and a full 5-gallon keg can be bottled in roughly 30 minutes. Since your beer was already carbonated before you bottled it, your bottled beer is ready to consume immediately! And thanks to the purging process, your beer will be exposed to less oxygen and will maintain its original flavor profile for longer. Keep some bottles on hand, send them to your next competition, or take them to a party to impress your buddies. For more details on the filling process, check out the Instructional Video below.    

Read more less

Savvy homebrewers love quick disconnects on their gas lines! They give you the ability to quickly move hoses from one configuration to another with ease!   These quick disconnects feature 3/8" barbed fittings which can be used with 5/16", 3/8" or 7/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you don’t need to worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade Buna-N.   In short, these QDs are durable, user friendly and versatile. A no-brainer!   This is a direct replacement to the Female Quick Disconnect with 3/8" Barbs that is featured on the BrewBuilt CoolStix™.

Read more less

The connectivity package required to connect the Blichmann BeerGun Bottle Filler to your ball lock keg and CO2 setup. You will also need to split your gas tubing using a Stainless Steel Flare Tee.

Read more less

Allows you to mount your Tapcooler bottle filler to any magnetic surface, like the side of your kegerator or keezer Provides effortless handsfree filling, while you get ready to fill the next bottle Works with all versions of the Tapcooler Extra strong dual pot magnets on the back provide a sturdy operating setup Already own a Tapcooler, and want a better and more efficient way to fill your bottles with it? Then look no further than the Magnetic Handsfree Mount for the Tapcooler. This accessory allows you to mount your Tapcooler to the side of any magnetic surface (like your kegerator or keezer) to enable handsfree filling, bottle after bottle. No more having to hold onto the Tapcooler while filling. With this, you can setup the bottle, begin filling, and then use your free hands to get ready for the next bottle. Get the handsfree mount for your Tapcooler today, and make filling your homebrew bottles even MORE fun (if that was possible)! NOTE: You'll need to use the Beer Valve Connector, Intertap Extension Tube, or Faucet Extension Tube to use the handsfree mount. These items are all sold separately, so make sure to grab one if you don't have one already. This item is the handsfree mount only. The Tapcooler bottle filler and extension tubes are all sold separately.

Read more less

The Tapcooler Nanocanner™ magnetic bracket mount allows you to setup the can filler on almost any magnetic surface, like the side of your kegerator! While the magnets are small and compact, they are hella strong! Each bracket has two pot magnets with a weight rating of 60 lbs. each! That's a lot of weight for two small magnets! You can also hook multiple mounts together to create an even bigger can filling setup. Why fill one can at a time, when you can do four!?  

Read more less

Premium Counter-Pressure Bottle filler that is designed for the smaller craft brewer or dedicated homebrewer to help make bottling day faster and more efficient The four separate filling heads have individual Stainless Steel 3-way control valves that allow for quick fill rates Only requires one person to operate A single PRV provides equal backpressure on all heads resulting in matching flow rates without adjustment Individual purge valves on each fill head allow for nearly all oxygen removal in a bottle, ensuring that the beer stays fresh for longer The removable drip tray is fully draining with a barbed outlet for constant filling and easy cleaning A purge valve on the reservoir helps make sure that foam never builds up 304 Stainless Steel Construction and easy-to-use functionality, all resulting in a top-of-the-line bottle filler Introducing the newly redesigned and updated G2 Medusa Multihead Counter Pressure Bottle Filler!  This unique unit was designed in-house by the MB Pro Engineering team and purpose built for the smaller craft brewer or dedicated homebrewer.  The Medusa will speed up bottling day while also reducing exposure to oxygen during the bottling process, resulting in higher quality beer with a longer shelf life.   The Medusa Multihead Counter Pressure Bottle Filler can be adjusted to cater all bottling needs.  All four heads can be operated individually, and the height, back pressure, and fill speeds can be adjusted for various bottle styles.  We've done our best to pack this unit with features that will handle all jobs, while keeping costs as low as possible.  Features: 3-way stainless steel valves on both inlet & back pressure sides of all fill heads. Improved Pressure Relief Valve has higher accuracy over fill rates, and directs foam into the drip tray rather than onto your bottles. Robust stainless steel frame stands on its own or can be easily bolted or clamped to a work surface Stainless steel fill reservoir keeps fill rates equal & reduces foaming Inverted fill tubes & reservoir purge means cleaner filling with even less possibility for foam. Dual TC Fill reservoir is easier to clean & allows for upgrades down the road (as they become available). Easily adaptable to fill from nearly any pressurized vessel. Height is adjustable from shorty bottles to growlers.  Easy disassembly for cleaning, storage & maintenance,  Sanitary 1.5" TC inlet for beer (Clamp and Gasket sold separately)  3/8" tube connection for CO2. Backpressure Bar allows for a single adjustment point for fill rates. No more adjusting PRVs on each fill head. Minimum Bottle Height: 6.9" Maximum Bottle Height: 16.5" Maximum Working Pressure: 15 PSI Dimensions:  Footprint: 26-3/8" L x 8" W Drip Tray: 23-1/2" L x 5-1/2" W Overall Height: 25-3/8"   Please Note: Filler valves include a Teflon gasket. Do not soak the valves in PBW which can corrode Teflon material after prolonged contact.

Read more less

Replacement O-Ring Kit for WilliamsWarn BrewBottler.

Read more less

Counter pressure can filler for carbonated beverages CO2 purge cycle prior to fill reduces head space O2 Flow stops automatically at the desired height Suitable for standard 12 oz and 16 oz cans as well as tall 19.2 oz cans Made to order in the United States The XF4500C counter-pressure can filler is designed for the Artisan Craft Person looking to can carbonated beverages in a simple way. The carbonated beverage filler is a counter pressure can filler that fills cans from a pressurized source, such as a keg, without losing carbonation; using a sensor probe that shuts off the fill at the desired height. This filler was designed to be technically sophisticated, while operationally very simple. Even though this machine is designed for carbonated beverages, such as beer and kombucha, it can also be used for still products, using a pressurized keg or pump. The XF4500C can be used with can sizes that have the standard 12 and 16 oz lid opening, including tall 19.2 oz cans, allowing great flexibility. The XF4500C requires that you also have an air compressor, which is used to hold the can rest in place, a canister of CO2, to pressurize and carbonate your tank or keg, and a pressurized container, to allow your product to flow from high to low pressure, through the machine. Each beverage filler is hand built to order in the California factory. Lead times average about 3 weeks. Features: One-person, ergonomic canning operation Adjustable fill height and level sensor for consistent filling Adaptable to various can sizes Easy to clean CO2 purge cycle prior to fill reduces head space O2 Greatly reduce product waste from overfill Can be used for both nitrogenated and carbonated products Light, stainless steel and anodized aluminum construction All materials in the beverage flow path are FDA certified as food grade for contact with alcohol Specifications: Applications: beer, kombucha, soda, sparkling wine, cider Capacity: 360 cans per hour (12 oz) Weight: 40 lbs Dimensions: 16" wide x 21" high x 15" deep Requires 2.0A of 115V 50/60Hz power  

Read more less

Finally--a multi-head Counter Pressure filler at an affordable price point! The Micro Filling Systems 4 Head Counter Pressure Filler works similarly to any other counter pressure filling device out there, but with greater ease and at a fraction of the cost of a custom built manual system or the semi and fully automated systems. Designed with the single worker in mind, our system requires only the minimum amount of handling per bottle.   Unlike most other manual models where all the bottles are loaded at once and then the filling unit is clamped down on them before the filling process can begin, the Micro Filling Systems 4 Head Counter Pressure Filler allows the worker to load from the bottom and fill each bottle individually and immediately. This allows some bottles to be filling while others are being loaded, thus reducing down time as the worker no longer has to wait for all the bottles to be filled before pulling them off the system to be capped. This workflow dramatically increases the number of bottles you can fill per hour! The height of the filling heads is easily adjusted by loosening a knob on either side of the unit and moving it up or down to fit a variety of bottle sizes and even growlers. Please note that growlers will require a larger diameter bung--please measure your growler's mouth diameter and find the appropriate bung here.   Key Features 4 head manual counter pressure bottle filler with individual actuating stainless steel filler heads. 3 way stainless steel valves with purge, fill and off positions. Stainless steel pressure relief valves to fine tune filling rates. Easily removable stainless drip tray with barbed drain fitting for tube attachment. HDPE mounting points to allow unit to be clamped or bolted to any desired surface. Food grade liquid and gas lines with stainless fittings and tees. Attachable to any carbonated beer, gas and cleaning solution source using many standard fittings. Fully adjustable height control to allow filling of many different bottle sizes (or even growlers!). Units are easily disassembled for servicing or additional cleaning. 1/4" Barbed inlets for both gas and beverage supply.   See the filler in action at Strange Land Brewing Company in Austin, TX!  

Read more less

Counter pressure bottle filler for carbonated beverages Flow stops automatically at the perfect height in the bottle neck every time, regardless of bottle variations Accommodate bottles up to 13.5" tall and up to 4" in diameter Made to order in the United States The Carbonated Beverage Filler is a counter-pressure machine that fills bottles with pre-carbonated beverages without losing carbonation; The XpressFill Carbonated Beverage Filler uses a high-tech sensor probe that shuts off the fill at the perfect height in the bottle neck every time, regardless of bottle variations. Even though this machine is designed for carbonated beverages, it can also be used for still products as long as they are fed to the filler using a lightly pressurized keg or pump. That means that you can use this for your normal bottling as well as for those special bottle-conditioned beers too! The Carbonated Beverage Filler is also suitable for filling Charmat-style sparkling wines, at a maximum operating pressure of 60 psi. The filler will accommodate bottles up to 4 inches in diameter and up to 13.5 inches tall. This covers most standard sized 12 oz, 22 oz and 750 mL bottles. Each bottle filler is hand built to order in the California factory. Lead times average about 3 weeks. Features & Specifications: 200 Bottles per Hour capacity (12 oz) All materials in the beverage flow path are FDA certified as food grade for contact with alcohol Maximum Bottle Dimensions: 4" D x 13.5" H Maximum Operating Pressure: 60 psi Weight: 32 lbs Dimensions: 16 inches wide x 17 inches high x 15.5 inches deep Requires 1.5A of 115V 50/60Hz power  

Read more less

Counter pressure bottle filler for carbonated beverages Flow stops automatically at the perfect height in the bottle neck every time, regardless of bottle variations Accommodate bottles up to 13.5" tall and up to 4" in diameter Made to order in the United States The Carbonated Beverage Filler is a counter-pressure machine that fills bottles with pre-carbonated beverages without losing carbonation; The XpressFill Carbonated Beverage Filler uses a high-tech sensor probe that shuts off the fill at the perfect height in the bottle neck every time, regardless of bottle variations. Even though this machine is designed for carbonated beverages, it can also be used for still products as long as they are fed to the filler using a lightly pressurized keg or pump. That means that you can use this for your normal bottling as well as for those special bottle-conditioned beers too! The Carbonated Beverage Filler is also suitable for filling Charmat-style sparkling wines, at a maximum operating pressure of 60 psi. The XF4500 requires that you also have an air compressor, which is used to hold the bottle rest in place, a canister of CO2, to pressurize and carbonate your tank or keg, and a pressurized container, to allow your product to flow from high to low pressure, through the machine. The filler will accommodate bottles up to 4 inches in diameter and up to 13.5 inches tall. This covers most standard sized 12 oz, 22 oz and 750 mL bottles. Each bottle filler is hand built to order in the California factory. Lead times average about 3 weeks. Features & Specifications: 400 Bottles per Hour capacity (12 oz) All materials in the beverage flow path are FDA certified as food grade for contact with alcohol Maximum Bottle Dimensions: 4" D x 13.5" H Maximum Operating Pressure: 60 psi Weight: 40 lbs Dimensions: 16 inches wide x 21 inches high x 15.5 inches deep Requires 1.5A of 115V 50/60Hz power

Read more less

Connects your new Counter-Pressure filler to your existing ball lock kegging system with a convenient, sealing quick-disconnect system. Having everything you need all in this kit makes set-up & use of your counter-pressure filler easier. If you have the Counter-Pressure bottle filler then this set is a must have!   Includes: Hardware to connect filler to gas system: Gas line tee, quick disconnect set, 6' of gas line.   Hardware to connect filler to keg: Threaded, black Beverage-Out Quick Disconnect, related flare fittings, 5' of beer line.   To Install: Shut off your gas. Cut your existing gas line assembly and clamp the Co2 Tee in that place. Clamp the gas line and beverage line to the Bottle Filler. Gas line on the larger barb fitting, beverage on the smaller barb. Make sure the counter pressure filler is closed by placing the valve handle perpendicular to the valve. Attach the beverage pin lock quick disconnect to your keg. Never attach a beverage out fitting to your keg without it being in a closed system. Connect the gas line quick disconnect. Finally turn your gas back on. You're ready to fill.

Read more less

Replacement Right Valve for WilliamsWarn BrewBottler. Does not come with any additional fittings or seals.

Read more less

This handy kit contains all the seals needed for a NukaTap Counter Tap Bottle Filler. Includes: (1) Bleed Valve Seal (1) 1/4" Male Thread Seal (2) Push-in Barb Seal (3) Gas Purge Valve Seals The majority of these seals in the NukaTap Counter Pressure Bottle Filler would never normally need to be replaced. But in the event of accidental loss or damage, please replace the seals with the addition of food-grade lubricant to ensure their longevity. KegLand Part Number: KL27632

Read more less

Replacement PRV Stem for WilliamsWarn BrewBottler. Does not come with any additional fittings or seals.

Read more less

Replacement Filling Head Body for the WilliamsWarn BrewBottler. Does not come with any additional fittings or seals.

Read more less

Replacement Left Valve for WilliamsWarn BrewBottler. Does not come with any additional fittings or seals.

Read more less

Replacement PRV Knob for WilliamsWarn BrewBottler. Does not come with any additional fittings or seals.

Read more less

Replacement Filling Head Compression Spring for WilliamsWarn BrewBottler.

Read more less

Replacement PRV Spring for WilliamsWarn BrewBottler.

Read more less