This tri-clamp extension tube features 1.5" tri-clamp connections at both ends and is made from high-quality stainless steel. Extension tubes (or spools) are an easy way to extend the length of any T.C. fitting or can be used to hard pipe a brew system for easier cleaning.
1.5" tri-clamp
12" long
Made from 304 stainless steel
ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
Fast, formerly known as Express, is the fastest Turbo on the planet, fermenting out 6kg of sugar in less than 24 hours and producing very good distillate quality. It is important that water start temperature is correct and only 6kg of sugar is used to get maximum speed.
Characteristics: Fastest Performing
Max Sugar Quantity: 13.2 lbs (6 kg)
Ideal Water Start Temp: 104° F (40° C)
Ferment Temp Range: 68 - 86° F (20 - 30° C)
Ideal Ferment Temp: 77° F (25° C)
Approx. Ethanol %: 12.5%
The American Homebrewers Association (AHA) is dedicated to promoting the community of homebrewers and empowering homebrewers to make the best beer in the world. The AHA is a not-for-profit organization with more than 43,000 members. Join or renew with the AHA to be part of the community.
Benefits of membership include Zymurgy magazine, eZymurgy and Zymurgy app, AHA Member Deals discounts on food, beer, merchandise and homebrew supplies across the country, access to the Great American Beer Festival® Members-Only session/ticket sale, access to AHA National Homebrewers Conference registration, free entrance to AHA Rallies, discounts on Brewers Publications new releases and AHA National Homebrew Competition entry fees – and more!
This mini pressure gauge is compatible with the BlowTie 2 spunding valve, Duotight in-line regulator, and KegLand mini regulator. We recommend using the gauge with a range closest to your desired pressure setting. If you'd prefer a digital instant read gauge, check out the Digital Mini Pressure Gauge (for gas applications only). Pressure Range: 0-150 psi (0-10 bar) Body Dimensions: 26mm x 26mm x 15mm Probe Diameter: 8mm WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge. Note: These gauges are accurate to 10% of the whole pressure range. (ie the 0-30psi Gauge is accurate to +/- 3psi). KegLand Part number: KL1501
Our Signature Series kits offer a selection of crazy, unique beers developed by MoreBeer! customers, associates, and homebrewing legends!
A quintessential example of the Pale Ale style, this recipe perfectly balances malt and hop character
Includes Cascade and Northern Brewer hops
Estimated ABV: 5.2%
Estimated IBUs: 29-33
Makes 5 gallons of finished beer
Craig has been perfecting his Travelin Man recipe over the years by brewing for competitions and for his own consumption at home. Travelin Man is at the high end of the pale ale guidelines, with a nice balance between the malt and hops. This is a great beer to let cold condition. Cold conditioning brings forward the malt flavors and makes it even easier drinking. Craig created this beer to take the edge off a long day of driving on the southern California freeway system and as his house ale. So whether you have been to the East or just feel like someone has given you the third degree, this fine ale will deliver what you are looking for. Craig recommends using White Labs California Ale Yeast.
Makes 5 gallons
Estimated Original Gravity: 1.052-56
SRM (Color Range): 11
IBUs: 29-33
Estimated Alcohol Percentage: 5.2%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Medium size plastic funnel. Smooth inner surface for easy cleaning and sanitizing.
Food grade plastic
BPA free
Max Temp Rating: 140°F (60°C)
See below for full funnel specs.
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Ported Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These Fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5 and 6 Gallons Punted bottom for less sediment transfer during racking O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.
Precisely control your fermentation temperature and improve the taste of your finished beer
Independently control up to four Grainfather Conical Fermenters
Compact design takes up little space in your home brewery
Cold crash beer to clarify before kegging or bottling
These systems will ship free to anywhere in the contiguous United States.
Control your fermentation temperature accurately, every time with the Grainfather Glycol Chiller! Temperature control is one of the most crucial elements for producing a good quality beer. Temperature swings can cause yeast to stress out and throw off unwanted flavors that will negatively affect your beer. Keeping the fermentation temp regulated and stable throughout the whole process will ensure you get the right flavor profile. With the ability to individually power and control the temperature of up to four Grainfather Conical Fermenters, each with their own fermenting schedules, the Grainfather Glycol Chiller is the perfect addition to ensure superior fermenting results.
Design
With a sleek and compact design, that still accommodates the full array of features, the Glycol Chiller maintains the Grainfather’s principle of providing quality home brewing equipment, that delivers craft brewery like results, with a small footprint.
With the addition of the Glycol Chiller, your system is operating at the ultimate level and you are even able to cold crash and lager down to 39-43°F (4-6ºC). The Glycol Chiller connects to a hidden cooling sleeve, located in between the two stainless steel walls of the Conical Fermenter. Your desired temperature is dialed into the digital temperature controller on the Conical Fermenter, the liquid then travels through this sleeve, cooling the stainless steel which in turn cools the beer in the fermenter. The cooling sleeve never comes into contact with the beer, is completely concealed and does not need cleaning or sanitizing - a true innovation for a fermenter on this scale.
Features
Allows you to cold crash 23 L (6 US Gal) of wort to as low as 4-6ºC (39-43°F). Minimum temperature will vary based on external factors such as ambient room temperature, the number of fermenters connected and other environmental conditions. Cools and powers up to 4 Conical Fermenters at different temperatures and fermenting schedules.
What's Included?
Glycol Chiller
Wall outlet power cord with plug
2 x cooling connection couplers
2 x 6.5 ft (2 m) insulated hoses
1 x Glycol Funnel
1 x silicon tube for priming pump
Propylene Glycol not included
Specifications:
LED display
1.5 Gal (6 L) glycol tank
300 W
110-120V, 60Hz
15.3" W x 17.7" D x 25.8"H
Weight: 62 lbs
CSA Certified
Note: The instructions for the Glycol Chiller will be attached to the outside of the shipping box. It is important that you retain these, do not throw them away and read them carefully before use to ensure no damage occurs to the unit. If these for any reason are not included with your purchase, we highly recommend you download a new copy via the instructions tab on this page and read them carefully.
This Dank IPA has a high bitterness and is packed with hops that contribute pine, earthy, and resinous notes
Includes Nugget, Columbus, Galena, Amarillo®, Simcoe®, Cascade, Citra®, Motueka, Nelson, Galaxy, and Strata hops
Estimated ABV: 9%
Estimated IBUs: 100+
Makes 5 gallons of finished beer
Do android brewers dream of electric hops? Hopefully we never have to find out, lest some dystopian future forces intrepid homebrewers to rise up against their robo-brewer overlords to spark a new (human) craft beer revolution. Terpene Dream will take you Offworld and back to experience flavors that some people wouldn't believe. Our take on the subgenre of India Pale Ale referred to as Dank IPA, this beer emphasizes the close genetic relation that hops and cannabis share. The hops selected for this beer contribute to an overall "dank" character that is full of pine, earthy, and resinous notes. A delicious bitterness, high alcohol content, and sturdy malt backbone all perfectly balance the assertive hop flavor. Time to brew.
Makes 5 gallons
Estimated Original Gravity: 1.078-83
SRM (Color Range): 5-6
IBUs: 100
Estimated Alcohol Percentage: 9%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Flash Brewing® Kits from MoreBeer!® require only 10 minutes to brew. Just mix and ferment. An explosion of aroma and flavor from a prophetic Cryo Hop® blend of Sabro®, Mosaic®, and Citra® Tropical fruit, coconut, blueberry, mango, and bright citrus burst from every pour Estimated ABV: 8.5% Estimated IBUs: 90 Makes 2 gallons of finished beer The Hop Prophecy IPA Flash Brewing® Kit The Hop Prophecy delivers a revelation in hop intensity—an explosion of aroma and flavor from a prophetic blend of Sabro Cryo, Mosaic Cryo, and Citra Cryo hops. Tropical fruit, coconut, blueberry, mango, and bright citrus burst from every pour, balanced by a smooth malt backbone with subtle notes of honeyed biscuit and light caramel. A clean fermentation with Flash Yeast™ ensures the hops shine brightly while finishing crisp and dry. With massive hop character, bold strength, and a remarkably fast turnaround, the Hop Prophecy proves that great beer doesn’t need to take forever. Flash Brewing® Kits Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. Flash Brewing® offers a streamlined process that not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home. Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing® eliminates the need to boil. Our Flash Brewing® malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets for flavor. Flash Yeast™ starts quickly and consistently produces clean beer that lets the malt and hops shine. The result is a high-quality beer that will absolutely surprise you. If you want to read more about the development of Flash Brewing® at MoreBeer! or have more questions please read our Frequently Asked Questions. Equipment Required for Flash Brewing® Flash Brews can be fermented in any wide mouth 6 or 7-gallon fermenter you already own. We suggest a wide mouth fermenter so you can easily pour in the ingredients. The 7-gallon Fermonster fermenter is a perfect choice. If you are new to brewing and need a fermentation kit, check out the Flash Brewing® Starter Kit for 2-gallon recipes. Includes: Hop Prophecy Flash Malt™: 3.8 lbs Sabro® Cryo Hops®: 0.5 oz Mosaic® Cryo Hops®: 0.5 oz Citra® Cryo Hops®: 0.5 oz HopBite™: 90 IBU Shot Flash Yeast™ Flash Brewing® Instructions Flash Brewing® recipe kits do not include priming sugar. For bottling, we recommend PopTops™ Swing Top Bottles and Pop Shots Carbonation Tablets. Sabro®, Mosaic®, and Citra® are registered trademarks owned by Hop Breeding Company. Cryo Hops® is a registered trademark owned by Yakima Chief Hops, LLC.
The ultimate portable draft faucet! Compact & lightweight with all the advantages of a standard NukaTap forward sealing faucet Pair with a Flow Control Ball Lock QD & Duotight Adapter and the whole assembly fits in your pocket Forward-sealing design prevents beer residue from gumming up the faucet Reduced first pour foam due to low thermal mass and conductivity Perfect for mobile draft, mini kegs, sampling from fermenters, and can even be installed on your kegerator or keezer Mini Design – Ideal Flow Rate for Small Systems Most conventional beer faucets are designed with 3/8" diameter spouts so you can pour a pint in just over 10 seconds. This type of flow rate is great for high turnover bars and commercial venues but isn't necessary or even desirable for all applications. For compact portable systems and home draft systems, a slower flow rate is easier to control and further reduces foaming issues due to the low liquid volume stored in the body of the faucet. The NukaTap Mini is also more ideal for pouring smaller doses. For example, cocktails where 5-8 oz of liquid is dispensed is difficult to control with a high flow rate tap. For portable systems, the NukaTap Mini with the Flow Control Ball Lock QD & Duotight Adapter assembly is small enough to literally put in your pocket, making it ideal for mini keg setups that you want to be portable or that you want to easily fit inside a domestic fridge where space is tight. Forward Sealing Forward sealing faucets are absolutely the way to go when it comes to beer taps. Old legacy taps still exist in the industry that are simply poorly designed. The issue with rear sealing faucets is that beer dries up on the internal piston. Aside from being unsanitary, as more and more beer dries up in these components the faucet can almost glue completely shut causing damaged seals or broken handles (this is particularly the case if it's left for some time to dry out with beer inside). These older legacy designs still exist probably due to poor education. The forward sealing designs do not have this problem and the tap drains out completely with no beer drying up on the mechanical moving parts in the same way. This makes the tap more sanitary and reduces maintenance. In many instances the price is similar so there is no reason to use a poorly designed rear sealing faucet. All NukaTap faucets are forward sealing. Laminar Flow Just like the NukaTap SS and NukaTap FC, the NukaTap Mini has been designed with laminar flow in mind. Laminar flow is critical for a beer tap as it means you will pour the beer with minimal foaming and a substantial reduction in wastage. Think about how many times a beer faucet opens and closes in its lifetime. 1,000 or maybe 10,000 times? Laminar flow saves wasted beer in excessive foam and the better laminar flow easily pays for itself in a reduction in lost beer. To use poorer designed faucets is essentially flushing money down the sink. Extensive modeling has been done on the NukaTap design to improve laminar flow. Integrated Seals That Are Indestructible and More Sanitary Unlike other designs, the NukaTap Mini body is made from Polyketone (POK) making it strong, robust, and able to be autoclaved. The seals are also over-molded from Santoprene® making them hard wearing so they will literally last for the lifetime of the tap without the need for replacement. Santoprene® and POK both have excellent resistance to chemicals such as caustic soda, peroxide, phosphoric acid, lactic acid, citric acid, acetic acid, and all common chemicals sold and used in the beverage industry. The seals internally are over-molded meaning no fissures or cracks exist for bacteria, crud, or yeast to hide. Superior First Pour Foam Due to Low Thermal Mass and Conductivity First pour foam is an issue caused by a warm tap body. For most faucets to pour well it's important to dispense enough beer to cool the tap body down to reach maximum performance. In addition to this the conductivity of the tab body also makes this worse so insulative materials simply work better than conductive materials. The NukaTap mini not only has very low thermal mass but is also highly insulative being made mostly from Santoprene® and POK. The combination of these two factors in conjunction with superior laminar flow makes for the lowest "first pour foam" effect out of any tap ever produced. Long Shank Alternative Most conventional beer faucets require a large 3/4" hole to be drilled through the side of your refrigerator, keezer, or cold box wall. Traditional long shanks also generally have a large volume of liquid that sits inside the wall unrefrigerated which is not ideal. New long shank alternatives developed for the NukaTap Mini are designed to suit any wall thickness and greatly reduces the stagnant beer sitting in the shank itself. For walls up to 2.7" thick, these wall mount shank kits include three screws, however if the wall is thicker, you can also use 6 small wood screws or something similar and attach three screws from the front and 3 from the back allowing you to go into any wall type. Another advantage of this new design is the tap will never accidentally rotate. Typically, other long shank beer taps rely on the hex nut on the shank to be done up tight enough to prevent rotation but if the wall compresses (often the case with foam walls) the tap is allowed to rotate. This new design has three fixing points making it impossible for the tap to rotate accidentally as the interlocking teeth behind the collet allow you to set the angle and then do up the collet to fix the tap permanently in that position. NukaTap Mini Accessories (Sold Separately): Duotight Flow Control Ball Lock QD (DUO159) Mini Self Closing Spring (D1598A) Duotight Adapter - 8mm (D1598B) Long Shank Alternative for Wall Mounting - Duotight 8mm (D1598C) Long Shank Alternative for Wall Mounting - Duotight 6.35mm (D1598D) Stout Spout (D1598E) Vertical Clamp On Assembly (D1598G) Horizontal Clamp On Assembly (D1598H)
With Duotight adapters you can take your draft system into the 21st century with EVABarrier draft line. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing.
4 mm x 8 mm EVABarrier is our recommended size for short beer lines in the 5-6 ft. range. 5 mm x 8 mm EVABarrier is recommended for longer beer lines in the 10-12 ft. range.
D-style sanke coupler
Stainless body
Stainless probe
PRV rated to 4.5 BAR (65 psi)
This stainless steel ball lock cap features soda bottle threads, allowing you to convert a 1 or 2 liter soda bottle into a convenient travel growler. The ball lock is compatible with both gas and beverage disconnects, so you can charge the PET bottle before you leave the house and dispense on the go. Use the Duotight compatible stem to connect a 8mm or 9.5mm reducer, then attach EVABarrier draft line to serve as your dip tube and you're all set! These caps also work great for quickly and conveniently cleaning your draft lines. Mix up a small batch of line cleaning solution in a soda bottle, attach the ball lock cap, and then connect it to your beverage line. Place a bucket below your tap to catch the cleaning solution and open your faucet. Then simply turn the bottle upside down and squeeze it to push solution through your line and out the faucet. You can also choose to pressurize the bottle first, but squeezing the solution through is just as effective. Fermenting with the FermZilla? This is ball lock fitting is also compatible with the FermZilla Collection Container. If you use the collection container to add dry hops, attach one of these caps and you'll be able purge the container of oxygen before opening the dump valve to introduce the hops. Attach some tubing and diffusion stone and you can oxygenate your wort through the collection container as well! Features: 6.5mm Duotight Compatible Liquid and Gas Ball Lock Compatible Disassembles for Easy Cleaning Made from Stainless Steel 28mm PCO 1881 Threads Please note: The threaded section of the bottleneck must be at least 1/2" long to form a seal. These caps are not compatible with the KegLand 500mL PET Bottles. Kegland Part Number: KL20435
These premium Sansone tanks undergo a special pickling and polishing process to enhance their corrosion resistance, making them ideal for continuous use in both home and commercial settings
Crafted from high-quality stainless steel with welded handles for long-lasting performance and easy transport
La Nuova Sansone has been crafting high-quality stainless steel containers in Italy for over 40 years, earning a reputation for exceptional design and quality
NSF certified stainless steel spigot available for purchase separately
The Sansone Europa-AQ model Fusti tank is made from 304 stainless steel with a mirror polish finish and welded handles. Compared to the standard Europa model, the AQ model undergoes an additional pickling and polishing process. This process improves corrosion resistance, which is key for continuous use, especially in commercial settings like wine bars, taprooms, and coffee shops that might use the tank as a self-service water station.
Pickling
Specialized acids are used to remove any surface impurities, scale, rust, and weld heat-tinted layers. This crucial step eliminates potential corrosion initiation points and ensures a uniformly clean and reactive surface. Furthermore, pickling promotes the formation of a passive chromium oxide layer, an invisible shield that protects the stainless steel from oxidation and enhances its inherent corrosion resistance.
Polishing
The pickling process is followed by a thorough polishing treatment. This creates an exceptionally smooth surface finish, minimizing microscopic imperfections where moisture and contaminants could become trapped and initiate corrosion. Polishing also refines the passive layer, making it denser and more uniform for superior protection. Beyond its practical benefits, polishing enhances the aesthetic appeal, making them suitable for even the most visible applications.
Benefits
The combined pickling and polishing treatments Sansone employs offer a multitude of benefits. The Europa-AQ model Fusti tanks exhibit significantly increased durability and longevity, withstanding harsh environments and frequent use. This enhanced corrosion resistance ensures the quality and taste of stored liquids are preserved, eliminating the risk of contamination from corrosion byproducts. The smooth, clean surfaces created by these processes also facilitate easy cleaning and sanitization, maintaining the highest hygiene standards.
Specifications:
Capacity - 15L (3.9 gal)
Diameter - 280mm (11.02")
Height - 310mm (12.20")
Opening - 130mm (5.11")
Empty Weight - 4.85 lbs
Outlet - 1/2" BSP
NSF Certified
Made in Italy
Stainless valve sold separately
Please Note: This fusti model does not include a plug for the outlet hole. Please see below for tank valve options.
Flash Brewing® Kits from MoreBeer!® require only 10 minutes to brew. Just mix and ferment.
An amazing Centennial hop bomb of an IPA modeled after Bell's Brewery Two Hearted® American IPA
Flavored with Centennial Cryo Hops®
Estimated ABV: 7%
Estimated IBUs: 60
Makes 2 gallons of finished beer
I Heart IPA Flash Brewing® KitI Heart IPA is based on the famous Bell’s Two Hearted® IPA. Light in color and overall maltiness but heavy on the Centennial hops that made Two Hearted® IPA famous. Centennial hops are an American classic with their citrus, lemon, and grapefruit flavors.
Flash Brewing® KitsIntroducing MoreBeer!'s Flash Brewing® Kits! Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. This streamlined process not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home.
Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing® eliminates the need to boil. Our Flash Brewing® malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets for flavor. Flash Yeast™ starts quickly and consistently produces clean beer that lets the malt and hops shine. The result is a high-quality beer that will absolutely surprise you.
If you want to read more about the development of Flash Brewing® at MoreBeer! or have more questions please read our Frequently Asked Questions.
Equipment Required for Flash Brewing®Flash Brews can be fermented in any wide mouth 3-gallon fermenter you already own. We suggest a wide mouth fermenter so you can easily pour in the ingredients. The 3-gallon Fermonster fermenter is a perfect choice. If you are new to brewing and need a fermentation kit, See related product.
Includes:
I Heart IPA Flash Malt™: 2.8 lbs
Centennial Cryo Hops®: 1 oz
HopBite™: 60 IBU Shot
Flash Yeast™
Flash Brewing® Instructions
Flash Brewing® recipe kits do not include priming sugar. For bottling, we recommend PopTops™ Swing Top Bottles and Pop Shots Carbonation Tablets.
Cryo Hops® is a registered trademark owned by Yakima Chief Hops, LLC.
An iconic duo of hops, well known for their complementary aroma compounds, combining for an exceptionally smooth drinking Pale Ale
Includes Citra® and Mosaic® pellet and Cryo Hops®
Estimated ABV: 5.6%
Estimated IBUs: 30
Makes 5 gallons of finished beer
Mosaic ® and Citra ® are fantastic hops on their own, but together they create an even more impressive combination. This iconic duo is known for their complementary aroma compounds, making them arguably the most famous hop pairing ever. The tropical hop flavors are enhanced by a light malt profile and smooth bitterness, resulting in a crowd-pleasing, easy-drinking Pale Ale that you’ll always want on tap for your best buds.
Makes 5 gallons
Estimated Original Gravity:1.049-54
SRM (Color Range): 4
IBUs: 30
Estimated Alcohol Percentage: 5.6%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Citra®, Mosaic® and Cryo Hops® are registered trademarks owned by Yakima Chief Hops, LLC.
Circulation manifold for mashing and sparging. Fastened around the sparge pipe and can be adjusted to sit at the top of the grain bed.
Included:
Manifold
Sparge adapter with 1/2" (12 mm) hose barb
Silicone core
Silicone tube 3/8" x 5/8", 3.2' (10mm x 16 mm, 1 meter)
Tri Clamp, 34mm
2" TC Sanitary heating element designed for use in santary applications where ease of cleaning is important. The heating element is designed to get the lowest possible watt density and is very easy to clean. Perfect for use with Brewtools Unitanks with kveik yeast or other high temperature fermentation applications.
Can also be used in cominbation with 2" TC pipes for RIMS applications.
Note that the product comes without any temperature or power control. The manufacturer does not take responsibility for incorrect use or use with too much power output. A PID-regulator may be needed to maintain accurate temperatures.
Diameter: Ø42mm (1.65")
Length: ~300mm (~11.8")
Included:
Heating element
Power cable 2 meter
The Brewtools Steam Condenser fits the Brewtools Steam Hat and uses cold water to cool the steam until it becomes a liquid that runs out of the condenser to a bucket or directly to the drain. The unit is an excellent alternative to a ventilation system.
The unit ships with a nozzle that supplies 1.1 liters of water per minute at 4 bar pressure. We also offer other nozzles that offers higher or lower flow depending on the water pressure where the system is used and other factors (sold separately).
Included:
TC 4" to TC 2" adapter (1 pcs)
20cm straight TC 2" pipe (2 pcs)
TC 2" Tee (1 pcs)
TC 2" Elbow (1 pcs)
TC 2" 1/8" nozzle adapter with TC34mm input (1 pcs)
TC 2" to 19mm hose barb adapter (1 pcs)
TC 2" Clamp (6 pcs)
TC 2" Gasket (6 pcs)
1/8" BSP-T nozzle, 30 degrees, 1.1 liters per minute @ 4 bar (1 pcs)
You Will Also Need:
Steam hat for your system
TC 4" Clamp and gasket
Water inlet adapter (TC34mm to hose or garden connector etc)
Outlet tube (16x25mm)
A TC34mm elbow is recommended for the water inlet
Please take not that you need much less power to keep the boil going with this device, and the risk of the wort boiling over is high when too much power is used, so make sure to take the necessary precautions. To sustain the vacuum, the drain tube from the condenser must not have any counterpressure. We recommend draining to a bucket where the tube is not submerged in the water, or suspend the tube directly over a floor drain.
For User Manuals and support, please follow this link to Brewtools Docs.
This kit includes everything you need to perform a pressurized transfer from your standard Ss Brewtech Chronical Fermenter. Attach the pressurized transfer fitting to the lid of your Chronical using the TC clamp and gasket, then attach the transfer fitting to your CO2 regulator. Finally, install the 1/2 in. barb to your racking valve and run the silicone tubing to your keg. The pressurized transfer fitting includes a PRV that prevents pressure from building to unsafe levels within your Chronical.
This Kit Includes:
1x Pressurized Transfer Fitting
1x TC Clamp
1x TC Gasket
1x 1/2 in. Barb to 1/2 in. NPT
5 ft. 1/2 in. Silicone Tubing
2x Hose Clamps
In case yours got too close to the flame on your brewing system. Probes can also be damaged by kinking which will cause a controller to give an inaccurate, high, reading. This is a replacement wire and thermistor for our line of Ranco controllers. The sensor probe is 1/4 in diameter and works well with the Stopper or Coupler Thermowells. Temperature Range of -30 to 220F. 8 ft. long.
Probes are water-resistant, but not water proof.
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. These Fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 0.6 lbs Temperature Limit: 140° F Height: 9.45 inches Diameter: 6.7 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.
Includes every replacement seal for the NukaTap Flow Control faucet, ensuring you're prepared for any maintenance needs
This kit contains all the seals needed to upgrade a Gen 1 NukaTap Flow Control faucet to the Gen 2 mechanism, improving performance and longevity
Provides a full set of seals to quickly fix leaks, replace lost seals, or maintain taps used in demanding settings
This complete kit provides all the replacement seals you need for the Gen 2 NukaTap Flow Control faucet. If you have the Gen 1 Flow Control model, you can use the improved flow control mechanism in this kit to effectively upgrade your faucet to the Gen 2 Flow Control model.
Most of the seals in this kit are durable and won't require frequent replacement. However, if you experience a leak, accidentally lose a seal, or use the tap in a demanding commercial environment, this kit has you covered.
When replacing seals, we recommend applying a food-grade lubricant to ensure a long-lasting and secure fit. As you take the tap apart, it can also be helpful to take a picture or make a note of where each seal is located to make reassembly easier.
Includes:
The Nuke!
Bonnet Washer
2 x Black POK Cup Seal Washers
Nozzle Washer
Flow Control Arm Seals
Flow Control Arm Thread Seals
Gen 2 Flow Control Mechanism
KegLand Part Number: KL44950
Trubinator is a product for use in your brewing system or boil kettle. During whirlpool, hops and other particles will gather in the middle of the filter, making it possible to pumpe more clean wort to your fermenter. A single wingnut and bolt holds the filter in place, so it's easy to disassemble for cleaning. Diameter: 320mm (12.6") Height: 90mm (3.5") Standard filter: R2x5 For User Manuals and support, please follow this link to Brewtools Docs.
Why buy mustard from the store when you can easily make it at home? The Pop Cultures Mustard Kit gives you everything you need to make incredible mustard that can be customized to your liking!
What’s better than homemade mustard? Homemade mustard made with beer! Bring your favorite beer to the party and follow the easy step-by-step instructions to create a delicious mustard that will elevate your next backyard BBQ.
Gift the Pop Cultures Mustard Kit to the home cook, barbeque enthusiast, or DIY-lover in your life, and join in on the fun experience of making your own homemade mustard with them.
Discover • Create • Share • Enjoy
Includes:
12 oz Jar with lid
Cloth Cover
Pop Cultures Mustard Seed Mix
Sea Salt
Easy to follow step-by-step instructions
Straight-A is an essentially non-foaming and environmentally sound product to remove tough soils yet protect soft metal finishes and minimize residue. It is gentler and safer than caustic-based cleaners, yet very effective at breaking down soils and removing stains. Non-corrosive and compatible with all vessels and equipment surfaces.
What is Straight-A?
Straight-A was developed as an environmentally sound product to remove tough soils yet protect soft metal finishes. Straight-A incorporates active oxygen for de-staining and protein disruption in addition to alkaline salts and chelating agentsto break down and disperse soils. In this way Straight-A helps to quickly and easily rinse soils away while minimizing residue. Furthermore, the oxygen content provides an additional benefit by lowering the oxygen demand of the wastewater.
Straight-A’s components will readily biodegrade or revert to naturally occurring minerals over a short period oftime and the productitselfis non-hazardous and non-corrosive.
Because Straight-A is essentially non-foaming when used at the recommended use concentration, it may be used in clean-in-place (CIP) systems as well as in the soak tank. Straight-A may be used on essentially all surfaces, being safe for brass, copper, aluminum, and stainless, as well as polycarbonate and vinyl.
Soaking and Manual Washing:
Dissolve 0.5 oz per gallon of water. If heavy soils are present, 1–2 oz will boost detergency.
CIP Cleaning:
Use 0.5 oz for daily treatment of minimally soiled vessels and equipment, but for heavily soiled vessels such as fermenters, 3 oz is recommended. Heat the solution to 120–180°F and circulate for 30 minutes. Follow with a clean water rinse.
First produced by Sutter Home winery in California, White Zinfandel was made by quickly removing the zinfandel grape skins from the wine before too much color could be imparted. This resulted in a pink-colored white wine that quickly became more popular than traditional zinfandel wines. The grape itself is one of the oldest known varieties and produces a wide range of wines that can be hearty, rustic, deep reds to the light, sweet rosé style that is White Zinfandel.
The VineCo Original White Zinfandel is perky and light with notes of strawberry and raspberry. This light-medium bodied wine has no oak character. Off-dry and easily enjoyed with an alcohol content of 11.5% by volume.
White Zinfandel, California
Strawberry and raspberry
Sweetness: Off-Dry
Oak: None
Body: Light-Medium
ABV: 11.5%
Kit Volume: 8 L
Approximate Yield: 23 L
Ready to bottle in 4 weeks
This is a direct replacement of the table spacer that comes standard with the Cannular Can Seamer. Sized for 500 ml / 16.9 oz Can Fresh aluminum cans.
Kegland Part number: KL13277
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
304 stainless steel splash resistant construction
Industrial design using commercial quality components for long life and easy serviceability
On/Off thermostat control
Outlet fully disconnected when powered off for added safety, unlike some one-leg designs
Wall mount bracket allows you to get the controller off the table and out of the way
Keep your temps tight with the BrewBuilt™ HLT Controller! Perfect for keeping your sparge water or mash water at your set temperature—it allows you to control a 208-240V heating element up to 30 amps based on temperature. The controller works by turning the burner power on and off at 100% power until it reaches the temperature setpoint. Features industrial-style power switches, and a 1/6 DIN Controller mounted on a splash resistant stainless steel enclosure. Pre-cut mounting holes allow you to hang the controller on your brew stand on the wall at eye-level. We highly recommend mounting the controller so you don't have to worry about keeping an area of your table dry where you might lay it down. L6-30 connections with 4 ft. cords on either end. Compatible with all 208-240V elements 30 amps and lower. While L6-30 are the most common elements available, yours may need an adapter. Uses a 9' stainless braided PT-100 temperature sensor.
The HLT Controller includes a contactor to fully shut off both legs when you throw the power switch, making the free end of the cord safer when the element is not plugged in.
If you'd prefer not to mount the controller to your wall, consider the stainless steel Controller Stand.
**Caution: In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.**
WineStix are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These are Light toast North American Oak staves, and depending on the wine, will impart flavors of light vanillin, almonds, coconut, and fresh oak. This is a two pack of WineStix, sized specifically for a 5-6 gallon carboy of wine. WineStix will easily fit through the mouth of a glass carboy, and can be attached to a string via the drilled hole for easy removal!
One carboy Winestix will treat 5-6 gallons of wine.
These plastic corks are a great looking and economically cheap way to bottle up those sparkling wines you want to put away for the next big event.
Dimensions:
Height: 42 mm
Stem Diameter: 19 mm
Head Diameter: 32.7 mm
The Pop Cultures Kimchi Kit has everything you need to make delicious and flavorful kimchi at home! Homemade kimchi is so good that you will want to put it on everything.
All you need to do is bring the fresh ingredients, and the Pop Cultures Kimchi Kit gives you everything else you need. With easy to follow, step-by-step instructions, you’ll be able to get a batch of kimchi started and fermenting in about 30 minutes. From there, you’ll be able to monitor the entire fermentation process right from your kitchen counter.
The Pop Cultures Kimchi kit, and the entire line of Pop Cultures kits, makes for an excellent gift or fun DIY project that can be enjoyed with friends and family.
Discover • Create • Share • Enjoy
Includes:
1 Gallon Fermentation Jar
Lid with Airlock
Fermentation Weight
Stick-on Thermometer
Sea Salt
Gochugaru (Korean Chili Powder)
Easy to follow step-by-step instructions
This BrewMaster Series kit was developed in collaboration with the brewmasters at E.J. Phair Brewing Company
A clean malt profile with very low bitterness and packed with hop aroma from multiple dry hop additions
Includes Citra®, Multihead, Idaho Gem™, and Cashmere hops
Estimated ABV: 6.6%
Estimated IBUs: 11
Makes 5 gallons of finished beer
Bow down and tremble homebrewer, for you are in the presence of a king! This 30-story tall liquid kaiju will singe your senses with multiple Multihead additions, culminating in a tropical gravity beam blast of guava and melon. Survive this opening assault and you’ll be hit with an Idaho Gem™ thunder spark of pineapple, and then swept away by hurricane winds of Cashmere lemon/lime and stone fruit. Just as King Ghidora is not limited to a single ferocious maw, you’ll be hard-pressed to have but a single pour of this juicy, tropical brew. Without a ragtag ensemble of advorseries spearheaded by Godzilla himself, King G will reign over your beer rotation till he ultimately brings about the Earth’s next extinction-level event and moves on to another planet victim.
King Ghidora was brewed in collaboration with our Pittsburg, CA neighbors, E.J. Phair Brewing Company. It features a clean malt profile of light DME with a touch of white wheat for head retention. With only a quarter ounce of Citra® added late in the boil, this beer shows very little bitterness and lets the flavor and aroma hops do the talking. The first dry hop addition is added to the fermenter before transferring wort from the kettle. Although this isn't a Hazy IPA, the beer will have a slight permanent haze due to biotransformation, which occurs when yeast interact with hop oils during primary fermentation.
Makes 5 gallons
Estimated Original Gravity: 1.061
SRM (Color Range): 4
IBUs: 11
Estimated Alcohol Percentage: 6.6%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Looking to ferment like the Pro’s? The new ANVIL Crucible™ Conical Fermentor is the hands-down best value in a stainless steel conical fermentor on the market. The rotating racking arm and large pro-style tri-clamp bottom dump will have you racking crystal clear beer and harvesting yeast like a pro! Let the Crucible™ be the showpiece of YOUR brewery!
Available in 7 gal and 14 gal sizes, perfect for 5 and 10 gal finished batch sizes
Rotating racking arm is ideal for transferring clear beer, leaving the yeast and sediment behind
Pro-style welded 1.5” tri-clamp bottom dump makes dumping sediment and harvesting yeast a snap
Embossed level markings (gal and L) will never wear off
Sturdy carry handles makes moving your beer safe and easy
Protective caps on the legs protects floors and counters
Includes liquid crystal thermometer, airlock and stopper
Optional cooling systems maintains perfect fermentation temps
Optional yeast harvesting kit is perfect for reusing your yeast and saving money!
Leg extensions lift the unit high enough to gravity drain into kegs
Specs:
Height – 33.8" to top of lid (Add 6.25" for airlock and stopper)
Width - 21" handle to handle
Depth – 16.5” Depth
Note: the Crucible is not pressure capable.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Mini oxygen regulator with integrate gauge for beverage applications. Use with a refillable O2 cylinder to oxgenate wort before pitching yeast.
Features:
CGA-540 connection
0 - 4 LPM flow range with 1/16th increment
Barbed outlet
Dimensions:
Weight: 1.25 lb
Length: 6.75"
Width: 1.75"
Depth: 1.25"
Dry mead is similar to a dry white wine. This kit will make a delicious dry mead that you can age out for years to come. You can also choose to carbonate it and serve at a wedding for a sparkling mead toast! As a slight aside, the term Honeymoon is said to refer to drinking Mead for 1 month after the wedding to help ensure the birth of a boy.
While the kit is great still or carbonated, the adventurous home fermenter could use this kit as a base on which to experiment. Consider fermenting it out and then splitting it off into smaller 1 gallon containers where you can make a sweet mead by adding more honey to one, vanilla bean to another, fruit to another, etc.
When making a Dry Mead we recommend that you have a small amount of Tartaric Acid on hand at the end of fermentation. As with a wine, a final small bump in acidity can bring out the honey flavor and aroma and add a bit of refreshment. We suggest adding 1/4 tsp at a time to your taste.
Features 12 lb of Wildflower honey and all the nutrient packs needed to make premium mead. Tartaric acid, if you wish to try your hand at adjusting acidity is sold separately.
Dry Yeast Recommendation:
DV10: Strong and clean, stays true to original honey's flavours and aromas.
QA23: Aromatic / Floral, great bouquet (a bit more lean and focused than R2)
W15: Great aromatic profile (true to the honey source) and heavy mouthfeel.
Includes our simple, step-by-step two page instructions, which will teach you the basics of making mead.
This kit does not include yeast. Please see our recommendations above.
Bravo™ is an excellent bittering hop that has become popular with American craft brewers. Known for a floral, fruity, and slightly spicy aroma. The high alpha bitterness is balanced by a smooth finish. Try Bravo™ in Pale Ales, IPAs, Stouts or even Barley Wines.
Hop Statistics
Alpha Acids: 14.0 – 17.0%
Beta Acids: 3.0 – 5.0%
Alpha-Beta Ratio: 2.8 - 5.67
Cohumulone: (% of alpha acids): 29 – 34%
Total Oils in mls per 100 grams dried: 1.6 – 2.4
Storage(% alpha acids remaining after 6 months storage at 68° F) 60 – 70%
Similar Hop Varieties: Apollo, Magnum
Bravo™ is a trademark owned by S. S. Steiner, Inc
The Megamouth Torpedo Keg series features an extra-large lid opening for easy cleaning
Brand new, all-stainless construction ball lock keg
Stackable with ball lock quick disconnects in place
Etched In and Out labels near the keg posts for easy identification
Rolled handles for a comfortable grip
Made by an ISO certified commercial keg manufacturer with high-quality laser welded seams
The Megamouth Torpedo Kegs are by far the easiest to clean and maintain out of any ball lock homebrew keg you'll find. With an extra-large lid opening, even the buffest of homebrewer (we hear they do exist!) will have no trouble reaching in for a good scrub when it kicks—no expensive keg washing contraptions needed! The Megamouth makes for an excellent pressurizable fermentation vessel and is the ideal choice for brewers who prefer to add dry hops and other flavoring ingredients directly to the keg.
Quality First
Here at MoreBeer! we love nothing more than quality interior welds. We've spent a decade rejecting kegs made overseas because the interior welds have never met our standards. If a weld is not perfect and shows evident burn marks along with nooks and crannies it cannot be sanitized effectively. Torpedo kegs are machine welded and exceed our standards for quality. This weld quality is possible because these kegs are made by an ISO certified commercial keg manufacturer.
Cool Features
Torpedo Kegs were designed to stack with Ball Lock quick disconnects in place and serving which is a cool feature for some brewers who have vertical space in their refrigerator. We also like the rolled stainless steel handles. They are comfortable to grab and will never come off like some rubber handles can over time. “In” and “Out” is etched near the keg posts for easy identification which is very handy when you are connecting lines in a refrigerator or kegerator and trying not to make a mistake.
Overall for the price and quality, along with free shipping from MoreBeer!, the Torpedo Keg is an amazing value!
Specifications:
Mouth Opening: 5.8" L x 4.8" W.
Max Pressure: 130 psi
PRV Rating: 85 psi
High Quality Laser Welded Seams
ISO9001 Quality Assurance
Made from 304 Stainless Steel
Dimensions:
Height (in.)
Diameter (in.)
3 Gal
13.4
11.4
5 Gal
17.9
11.4
6 Gal
20.5
11.4
10 Gal
30.3
11.4
This simple pump kit is a great way to clean your draft lines when you don't want to waste CO2 or mix up a full batch of line cleaner. The PCO tee piece can be attached to a PET beer bottle or repurposed soda bottle, then pressurized with the hand pump to push cleaner through your ball lock disconnect and draft lines.
You can also use the pump kit to turn just about any PET bottle into a mini party keg; one that's easy to take with you while leaving your gas equipment at home. But since you'll be using air to push the beer out, we recommend consuming the contents of the bottle well within 24 hours.
Kit Contains:
Yellow carbonation cap
Red Tee Piece - 28mm PCO 1881 Threads (Female x Male x Male)
Mini yellow hand pump
11.75" length of EVABarrier tubing (5mm ID x 8mm OD)
PET Bottle not included
KegLand Part Number: KL20220
Specially formulated to passivate and re-passivate stainless steel. Low-foaming designed to attack beer stone and scale. Acid cleaner #5 is specially formulated for cleaning and passivating stainless steel tanks. Acid cleaner #5 is a blend of inorganic acids with a low foam detergent designed to rapidly attack scale and stone to leave metal surfaces sparkling. This special acid blend will help remove the stubborn protein stain (blue rainbow) as well as food deposits like starch. Acid cleaner #5's low foaming characteristic enhances cleaning action when applied by circulation, spray or agitated soak cleaning. It is especially formulated to passivate and repassivate stainless steel. Acid Rinse Make solution of 1 oz. per 10 gallons of water Circulate the solution for 15-20 minutes at a temperature of 50°-140°F Drain, rinse, and sanitize before use Acid Wash Make solution of 1 oz. per 1 gallon of water Circulate the solution for 15-20 minutes at a temperature of 50°-140°F Drain, rinse, and sanitize before use Initial Acid Passivation After cleaning vessel, make a solution of 5 oz. of Acid #5 to 1 gallon of water Circulate for 15-20 minutes at a temperature of 120°F Drain vessel and ALLOW TO AIR DRY Vessel must air dry in order to achieve successful passivation After letting equipment air dry, rinse before sanitizing Sanitize before use Repassivation After cleaning vessel, make a solution of 1 oz. of Acid #5 to 1 gallon of water Circulate for 30 minutes at a temperature of 120°F Drain vessel and ALLOW TO AIR DRY Vessel must air dry in order to achieve successful passivation After letting equipment air dry, rinse before sanitizing Sanitize before use Please note: Intended for commercial use. Due to DOT HAZMAT shipping restrictions, orders for 1-gallon, 15-gallon, 55-gallon, or multiple 5-gallon units will require freight shipping. HAZMAT items are not able to be returned.
Medium Plus toast level oak chips
Fire Toasted
Made from Hungarian/Slovanian Oak
Winery quality Slavonian Oak chips with Medium Plus level toast. Recommended for use during fermentation for 1-2 months. As a starting point use 1.5-3.5 oz per 5 gallons. Taste after two months and add more if needed.
Balazs segments are made from Slavonian oak. Slavonian oak is grown in the area of Croatia that borders Hungary. While the area of Slavonia has changed hands many times, being under Hungarian control in the past, what has always remained constant is the quality of the oak grown in the region. Slavonian oak is beloved in Italy where it is widely used in the traditional and classic Italian wines of the Veneto, Tuscany and Piedmont. It is known for having the utmost respect for the fruit which is why Italian producers extensively use this oak. This makes this oak extremely useful for home winemakers who, because of the small quantities being made, need to pay special attention to not over oaking their wine.
Use: Fermentation
Form: Chips - 4-40 mm
Time of Contact: 1-2 months
Recommended Quantity: 0.3-0.7 oz/gal
Type: Medium+ Toast
Like many thermometers that were built for cooking and food processing, we find this digital oven thermometer to be just as useful for brewing applications. The cable allows you to place the temperature probe where needed and view the temperature reading from a convenient location. Especially helpful if your mash tun or hot liquor tank sit high up on a tiered gravity system. It also has a programmable alarm for when you hit your temp and a timer function you can use to track your mash progress or boil additions.
Please note: the cable attached to the probe is not waterproof so be careful to not let it be fully submerged. If this does occur and your readings are off, you can place the probe in the oven (leaving the plug outside) and bake for 1 hour at 375°F to boil the moisture out of the probe.
Broad temperature operating range 0-250°C (32–482°F)
Temperature display resolution 1 degree C
Timer range 99 min 59 sec
Timer alarm function
High temperature alarm function
Celsius and Fahrenheit display option
Battery operated 1xAAA
Bottle Sealing Wax is a sealing wax for any type of wine, liquor or bottled liquid. In all applications, Bottle Sealing Wax provides a tough, moisture resistant coating, which preserves freshness, flavor and fragrance. Bottle Sealing Wax adheres on both natural and synthetic corks. It provides tamper evident protection for your product. Bottle Sealing Wax can be applied by capping the top of the recessed cork or by dipping the corked bottle into the wax. Wax beads are easier to measure and melt than wax blocks.
Sold in 1 pound bags and 50 pound boxes. 1 pound will cover approximately 30 bottles, depending on usage.
DIPPING INSTRUCTIONS: The wax should be melted in a double boiled or crock pot. Maintain wax temperature at 180°F to 190°F. The ideal temperature may vary, depending on ambient temperature and humidity as well as the temperature of the bottle and cork.
Invert the bottle and carefully lower the cork end into the melted wax to the desired depth. Leave the top immersed for 10 to 15 seconds. Carefully lift bottle straight up and allow the excess wax to run off the inverted bottle top. When excess wax slows or stops, turn bottle upright and allow to cool.
