Prevents vacuum pump failure when bottling sugary or hot products by effectively filtering impurities.
Comes with pre-assembled tubes and adapters for quick and hassle-free setup; designed for vertical mounting.
Built to withstand prolonged use in dusty environments, with a metal mesh filter element and easy-to-clean components.
When using the Ultrafiller to fill liqueurs, spirits, syrups, or other sugary products—as well as hot products such as juices—it is essential to equip the machine with the oil bath filter. This filter protects the vacuum pump, which could fail over time without proper filtration. Please note that the oil bath filter is not included with the Ultrafiller and must be purchased separately.
Important: Failure to use this filter when bottling the above-mentioned products will void the warranty for the bottling machine.
Mounting Instructions
Before using the filter, fill the cup with food-grade mineral oil up to the indicated level. Medium-density oils are recommended for optimal performance.
Install the filter between the vacuum pump and the recovery tank. The kit includes pre-assembled tubes and hose adapters for your convenience. Always mount the filter vertically:
Connect the OUT port to the pipe leading from the motor.
Connect the IN port to the pipe and quick-release fitting supplied with the tank. (Refer to the detailed instructions for further guidance.)
Maintenance
These filters are designed for prolonged use, even in dusty environments, offering excellent filtration and durability. To maintain optimal performance:
Regularly change the oil, ensuring the level remains at the indicated mark.
Remove impurities that accumulate during operation.
For particularly dusty conditions, disassemble and wash the lower parts of the filter daily.
Materials
Painted sheet metal container
Metal mesh filter element
Operating temperature range: 32°F to 197°F
Lenticular filters employ a filtering process similar to plate filters but are significantly easier to use
A sealed system ensures there is no dripping/leakage, unlike what occurs with plate filters
Filters are stacked within cartridges, making loading and replacement much simpler than a plate filter
Housings can be loaded with as few as one filter cartridge with the use of optional center posts
BevBright Lenticular Filter Housings streamline the filtration process, making it as effective as traditional plate filters but with greater ease of use. Their user-friendly design ensures that anyone, from experienced professionals to beginners, can operate them effortlessly. The setup is straightforward and without the complexities associated with plate filters.
One of the key benefits of lenticular filters is their sealed system. This design prevents dripping and leakage, guaranteeing airtight integrity and ensuring that your liquids remain protected and uncontaminated.
Filters stack neatly within the housing, and loading or replacing them is simple. There are no intricate assemblies required. Whether performing maintenance or adjusting filtration levels, the process is seamless and hassle-free.
Optional center posts allow the housings to accommodate as few as one filter cartridge, providing flexibility for various filtration needs, from large-scale production to small-batch operations.
Choose BevBright stainless steel lenticular filter housings for a filtration solution that is efficient, reliable, and easy to use. Each unit comes complete with hardware and instructions, ready for immediate use.
Made from 304 Stainless Steel
Polish: Ra<0.4um
Hardware Included:
(2) 1.5" T.C. Pressure Gauges
(2) 1.5" T.C. Butterfly Valves
(1) 1.5" T.C. Tee
(1) Top Relief Valve
(1) 1.5" T.C. Drain Valve
Clamps & Gaskets
Premium 316 stainless steel construction ensures durability and corrosion resistance, ideal for demanding beverage production environments
Wide compatibility with a range of filter cartridges offers adaptability and customization for optimal filtration results in beverage making processes
Multiple housings easily work in tandem for sequential filtration with cartridges of different micron ratings, ensuring thorough removal of bacteria for pristine final products
The BevBright 30" Stainless Cartridge Filter Housings are designed to streamline your beverage production with unmatched purity and efficiency.
Made from premium electropolished 316 stainless steel, these filter housings protect against contamination, ensuring your final product meets the highest standards of quality and taste. Engineered to resist corrosion in challenging environments, they offer durability and reliability.
These stainless steel filter housings are essential for precision filtration in beverage production. When used with a sterile filter cartridge, they effectively remove yeast and bacteria, delivering pure, pristine liquid. Tri-clamp ports ensure easy integration into your setup, and the option to daisy-chain filters allows for efficient multi-stage filtration, prolonging the life of your sterile cartridges.
BevBright filter housings are compatible with a wide range of filter cartridges, providing the flexibility to meet your specific filtration needs, from standard to sterile filtration.
Each unit comes complete with hardware and ready for immediate use. Trust BevBright 30" Stainless Cartridge Filter Housings to maintain the purity and excellence of your beverage from start to finish.
Made from 316 Stainless Steel
Polish: Ra<0.4um
Hardware Included:
(2) 1.5" T.C. Pressure Gauges
(2) 1.5" T.C. Butterfly Valves
(1) 1.5" T.C. Tee
(1) Top Relief Valve
(2) 1/2" T.C. Drain Valves
Clamps & Gaskets
Compatible with Scott Labs' ScottCart Code 7: 226 Twist & Lock 30" Cartridges
Example images shown. The Filter Housing also includes a 1.5" T.C. Tee & Pressure Gauge and 1/2" T.C.Drain Valves that are not pictured.
This Pop Cultures refill pack contains all the ingredients needed for a 1-gallon batch of Cider.
64 oz of preservative-free Apple Juice will need to be purchased separately.
Refill Pack Contains:
Apple Cider Concentrate - 0.5L
CellarScience FRESH Dry Wine Yeast - 8 g
One Step Cleanser - 2.5 oz
Lenticular filters employ a filtering process similar to plate filters but are significantly easier to use
A sealed system ensures there is no dripping/leakage, unlike what occurs with plate filters
Filters are stacked within cartridges, making loading and replacement much simpler than a plate filter
Housings can be loaded with as few as one filter cartridge with the use of optional center posts
BevBright Lenticular Filter Housings streamline the filtration process, making it as effective as traditional plate filters but with greater ease of use. Their user-friendly design ensures that anyone, from experienced professionals to beginners, can operate them effortlessly. The setup is straightforward and without the complexities associated with plate filters.
One of the key benefits of lenticular filters is their sealed system. This design prevents dripping and leakage, guaranteeing airtight integrity and ensuring that your liquids remain protected and uncontaminated.
Filters stack neatly within the housing, and loading or replacing them is simple. There are no intricate assemblies required. Whether performing maintenance or adjusting filtration levels, the process is seamless and hassle-free.
Optional center posts allow the housings to accommodate as few as one filter cartridge, providing flexibility for various filtration needs, from large-scale production to small-batch operations.
Choose BevBright stainless steel lenticular filter housings for a filtration solution that is efficient, reliable, and easy to use. Each unit comes complete with hardware and instructions, ready for immediate use.
Made from 304 Stainless Steel
Polish: Ra<0.4um
Hardware Included:
(2) 1.5" T.C. Pressure Gauges
(2) 1.5" T.C. Butterfly Valves
(1) 1.5" T.C. Tee
(1) Top Relief Valve
(1) 1.5" T.C. Drain Valve
Clamps & Gaskets
Low frame with wheels and flat top plate for Brewtools Troll Brew Table System.
Used for placing equipment like glycol chillers or handling malt when using the crane.
Remember M8 bolt kit for connecting to other modules.
Troll Frame With Plate only. Does not include Troll Table pictured in example photo.
Specifications:
Size: 28.75" x 28.75" x 5.9" (assembled)
Weight assembled: 37.5 lbs
Material: AISI 304
In the box:
1 pcs table frame, 28.75" x 28.75"
1 pcs flat top plate with hole
2 pcs wheels with brakes
2 pcs wheels without brakes
4 pcs 20-pack silicone plugs for holes
Tools and bolts for assembly
16" filter module for use with 16" stainless steel lenticular filter housings
Back flushable module
1 Micron for fine filtration of wine, spirits, and beer
Manufactured by Filtrox, the world's leading producer of high-quality filtration media
Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more.
Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.
Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications.
Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations.
Micron Rating: 0.5 - 1.5
Micron Mid Point: 1
Filtration Area: 38.7 ft² (3.6 m²)
Number of Lenses: 16
Back Flushable
Max. Backflow Pressure Differential: 7 psi (0.5 Bar) at 77°F (25°C)
Fibradisc AF 101 Plus2 Filter Module
Wine
Use: Fine filtration
Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr)
Max. Recommended Pressure Differential: 22 - 29 psi (1.5 - 2.0 Bar)
Spirits
Use: Fine filtration of cognac and whiskey chill haze removal
Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr)
Max. Recommended Pressure Differential: 22 psi (1.5 Bar)
Beer
Use: Very fine filtration, for long shelf life
Max. Recommended Flow Rate: 142 gal/hr (540 L/hr)
Max. Recommended Pressure Differential: 17 psi (1.2 Bar)
16" filter module for use with 16" stainless steel lenticular filter housings
Back flushable module
2 Micron rating are for general clarifying of wine and fine filtration of beer, seltzer and cold brew
Manufactured by Filtrox, the world's leading producer of high-quality filtration media
Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more.
Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.
Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications.
Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations.
Micron Rating: 1.5 - 3
Micron Mid Point: 2
Filtration Area: 38.7 ft² (3.6 m²)
Number of Lenses: 16
Back Flushable
Max. Backflow Pressure Differential: 7 psi (0.5 Bar) at 77°F (25°C)
Fibradisc AF 71 Plus2 Filter Module
Wine
Use: Clarifying filtration
Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr)
Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar)
Spirits
Use: Fine filtration of cognac and whiskey chill haze removal
Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr)
Max. Recommended Pressure Differential: 22 psi (1.5 Bar)
Beer
Use: Fine filtration, with fewer yeast cells
Max. Recommended Flow Rate: 142 gal/hr (540 L/hr)
Max. Recommended Pressure Differential: 22 psi (1.5 Bar)
Seltzer
Use: Fine filtration of seltzer base
Max. Recommended Flow Rate: 668 gal/hr (2,520 L/hr)
Max. Recommended Pressure Differential: 36 psi (2.5 Bar)
Cold Brew Coffee
Use: Fine filtration
Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr)
Max. Recommended Pressure Differential: 29 psi (2.0 Bar)
16" filter module for use with 16" stainless steel lenticular filter housings
Back flushable module
6 Micron rating provides a rough filtration that removes large particulates, often followed by finer filtration
Rough filtration is necessary on beverages with heavy sedimentation as the finer modules may clog without prefiltering
Manufactured by Filtrox, the world's leading producer of high-quality filtration media
Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more.
Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.
Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications.
Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations.
Micron Rating: 4 - 9
Micron Mid Point: 6
Filtration Area: 38.7 ft² (3.6 m²)
Number of Lenses: 16
Back Flushable
Max. Backflow Pressure Differential: 7 psi (0.5 Bar) at 77°F (25°C)
Fibradisc AF 41 Plus2 Filter Module
Wine
Use: Clarifying filtration
Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr)
Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar)
Fruit Wine or Fruit Juice
Use: Clarifying filtration
Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr)
Max. Recommended Pressure Differential: 22 - 36 psi (1.5 - 2.5 Bar)
Beer
Use: Middle fine filtration, with only a few yeast
Max. Recommended Flow Rate: 190 gal/hr (720 L/hr)
Max. Recommended Pressure Differential: 22 psi (1.5 Bar)
16" filter module for use with 16" stainless steel lenticular filter housings
Back flushable module
8 Micron rating provides a rough filtration that removes large particulates, often followed by finer filtration
Rough filtration is necessary on beverages with heavy sedimentation as the finer modules may clog without prefiltering
Manufactured by Filtrox, the world's leading producer of high-quality filtration media
Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more.
Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.
Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications.
Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations.
Micron Rating: 5 - 12
Micron Mid Point: 8
Filtration Area: 38.7 ft² (3.6 m²)
Number of Lenses: 16
Back Flushable
Max. Backflow Pressure Differential: 7 psi (0.5 Bar) at 77°F (25°C)
Fibradisc AF 31 Plus2 Filter Module
Wine
Use: Clarifying filtration
Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr)
Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar)
Fruit Wine or Fruit Juice
Use: Clarifying filtration
Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr)
Max. Recommended Pressure Differential: 22 - 36 psi (1.5 - 2.5 Bar)
Beer
Use: Clarifying filtration of beer, visually clear
Max. Recommended Flow Rate: 286 - 334 gal/hr (1,080 - 1,260 L/hr)
Max. Recommended Pressure Differential: 22 psi (1.5 Bar)
Cold Brew Coffee
Use: Clarifying filtration
Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr)
Max. Recommended Pressure Differential: 29 psi (2.0 Bar)
16" filter module for use with 16" stainless steel lenticular filter housings
Back flushable module
10 Micron rating provides a rough filtration that removes large particulates, often followed by finer filtration
Rough filtration is necessary on beverages with heavy sedimentation as the finer modules may clog without prefiltering
Manufactured by Filtrox, the world's leading producer of high-quality filtration media
Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more.
Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.
Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications.
Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations.
Micron Rating: 6 - 15
Micron Mid Point: 10
Filtration Area: 38.7 ft² (3.6 m²)
Number of Lenses: 16
Back Flushable
Max. Backflow Pressure Differential: 7 psi (0.5 Bar) at 77°F (25°C)
Fibradisc AF 21 Plus2 Filter Module
Wine
Use: Prefiltration
Max. Recommended Flow Rate: 668 gal/hr (2,520 L/hr)
Max. Recommended Pressure Differential: 36 psi (2.5 Bar)
Fruit Wine or Fruit Juice
Use: Prefiltration
Max. Recommended Flow Rate: 668 gal/hr (2,520 L/hr)
Max. Recommended Pressure Differential: 36 psi (2.5 Bar)
Spirits
Use: Coarse filtration of liquors, spirits
Max. Recommended Flow Rate: 478 - 668 gal/hr (1,800 - 2,520 L/hr)
Max. Recommended Pressure Differential: 36 psi (2.5 Bar)
16" filter module for use with 16" stainless steel lenticular filter housings
4 Micron rating are for general clarifying of beverages that do not need to be sterile filtered
Manufactured by Filtrox, the world's leading producer of high-quality filtration media
Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more.
Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.
Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications.
Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations.
Micron Rating: 3 - 6
Micron Mid Point: 4
Filtration Area: 38.7 ft² (3.6 m²)
Number of Lenses: 16
Versadisc XE 44 Filter Module
Wine
Use: Clarifying filtration
Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr)
Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar)
Fruit Wine or Fruit Juice
Use: Clarifying filtration
Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr)
Max. Recommended Pressure Differential: 22 - 36 psi (1.5 - 2.5 Bar)
Beer
Use: Middle fine filtration, with only a few yeast
Max. Recommended Flow Rate: 190 gal/hr (720 L/hr)
Max. Recommended Pressure Differential: 22 psi (1.5 Bar)
16" filter module for use with 16" stainless steel lenticular filter housings
10 Micron rating provides a rough filtration that removes large particulates, often followed by finer filtration
Rough filtration is necessary on beverages with heavy sedimentation as the finer modules may clog without prefiltering
Manufactured by Filtrox, the world's leading producer of high-quality filtration media
Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more.
Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.
Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications.
Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations.
Micron Rating: 6 - 15
Micron Mid Point: 10
Filtration Area: 38.7 ft² (3.6 m²)
Number of Lenses: 16
Versadisc XE 24 Filter Module
Wine
Use: Prefiltration
Max. Recommended Flow Rate: 668 gal/hr (2,520 L/hr)
Max. Recommended Pressure Differential: 36 psi (2.5 Bar)
Fruit Wine or Fruit Juice
Use: Prefiltration
Max. Recommended Flow Rate: 668 gal/hr (2,520 L/hr)
Max. Recommended Pressure Differential: 36 psi (2.5 Bar)
Spirits
Use: Coarse filtration of liquors, spirits
Max. Recommended Flow Rate: 478 - 668 gal/hr (1,800 - 2,520 L/hr)
Max. Recommended Pressure Differential: 36 psi (2.5 Bar)
Used – Refurbished
This unit is used. It has been restored to working order. It will have cosmetic defects and show signs of previous use.
It is still covered by our No Hassle Return Policy and 1 Year Warranty Policy.
A 3-Phase Crush Pad Specific must pump that transfers crushed grapes from your Destemmer Crusher to your tank or bin. Entire pump is on wheels and will slide under the Jolly 40 or Jolly 60 Destemmer Crusher. Grapes would fall into the awaiting stainless hopper. Stainless screw moves grapes into the eliptical, paddle style must pump that then moves them through 3" tubing to final destination. Considered more gentle than using a rubber impeller must pump. Only available in 3 phase power.
Details
Power: 2.5 HP Three Phase 220 v draws 4.7 amps
Capacity: 12,000 to 16,000 pounds per hour
Shaft Speed: 47-58RPM
Out Let Barb: 3" Tri-Clamp
Max Discharge Height: 9 feet
Max Discharge Distance: 30 feet
Weight: 220 Pounds
Pump Body: Stainless Steel
Loading Hopper & Screw: Stainless Steel
Refillable automatic lubricator
Hinged discharge cone can be opened for inspection
In Stock and Ready to Ship!
Speidel’s cuboid tanks are the ideal solution for small spaces. They fit perfectly, have curves that are easy to clean and have flawless weld seams. Both tanks have cooling jackets in L51 Layout with C6 Connection. The 1400L tanks has a 0.7 m² jacket and the 1650L has a 1.1 m² jacket.
In a few words: our rectangular models are always first choice! They allow you the perfect utilisation of space and guarantee Speidel’s top quality! Enjoy optimal fit with best hygiene and easy cleaning.
Standard Accessories:
Tank shell and tank bottom made of AISI 304 stainless steel, surface IIId (2R), marbled outside
Tank top made of AISI 316 stainless steel, surface IIId (2R), marbled outside
With lifting lugs
Base tank from 2,000 mm tank height upwards and stacking tank with ladder safety bow
Vaulted, stable tank top with moulded-on forward up-slope for complete filling and ventilation assuring a very small air contact area
Moulded connection neck with filling and vent neck, 2" T.C.
Free-standing base tank on 4 welded-on stacking legs
Sampling
Weld-on thread NW 10 DIN 11851 with sealing cap (for the installation of sample tap).
Manhole
Stable manhole neck seamlessly moulded from the tank shell, 420 x 320 mm, door with butterfly bow and hand wheel.
Racking Outlet
With welded-on reinforcing plate with 2" tri-clamp connection.
Fill Level
Weld-on thread NW 10 DIN 11851 with sealing cap including fastening points at tank shell (for the installation of fill level indicator).
Bottom Outlet
Vaulted, stable tank bottom with integrally moulded forward down-slope for complete draining with moulded connection neck, inhibiting suction effect with bottom 2" T.C. outlet.
The new GOfill bottle filler makes filling inexpensive, easy, prevents oxidation, and has a built-in pump. It is the perfect solution for small volume wineries.
Connect to a vessel containing wine to be bottled. Wine is collected in a single-use liner, automatically kept full by the pump. “A simple solution to minimize cleaning and oxidation as the fill liner is closed with no headspace – a signature of GOfermentor.” says Dr Singh, the inventor of a series of innovative products for the winery.
The liner feeds four bottle filling heads simultaneously using gravity flow. Filling can be paused for hours with no oxidation. Keep filling as long as you want, the pump refills the liner automatically. When bottling is complete – simply discard the fill liner and rinse the heads.
Gravity filling heads provide simple, reliable operation with minimal foaming. The disposable feed liner decouples filtration from the bottling operation, enabling one person operation. The smart pump automatically shuts off if there is no flow of wine, preventing air from contacting wine in the fill liner.
1. FOUR HEADS: Four gravity filling heads. 240 bottles per hour.
2. DISPOSABLE FILL TANK: Single-use liner feed tank – no washing, no oxidation, no contamination.
3. BUILT-IN PUMP: Built-in pump and automatic fill liner volume control.
4. AUTO-SHUTOFF: Liquid-out detector with automatic pump shutdown
Specifications:
Bottle rack is adjustable for different size bottles
Machine fills bottles to user-set level in bottle neck
Counter top unit
Requires 115VAC 10A household power
Dimensions: 18" x 18" x 38"
Weight (empty): 40 lbs
Fill bag capacity: 3 to 20 liters (user-set)
Filter housing and filters are not included
GOpump10 is an intelligent pump for pumping wine or similar fluids. It can be used in "PUMP" mode where the delivery rate is automatically controlled at the user's set flow rate or in "BATCH" mode where the user's preset volume is delivered at the user's set flow rate.
Two versions are available: GOpump10 and the lower cost GOpump10-LC. The GOpump10 features a magnetic induction sensor and is Bluetooth enabled with a free companion app. The GOpump10-LC has mechanical vane sensor and does not have Bluetooth capabilities.
Usage: general purpose winery pump for transferring or filling wine. Built-in accurate totalizer provides accurate estimate of total wine transferred. Controllable flow rate allows gentle or rapid transfer of wine. Automatic shutdown on empty detection.
NOTE: Do not use with fluids containing particles larger than 100 microns. Use inlet strainer. DO NOT use to pump grape must.
Dimensions: 11.5" x 13" x 7"
Weight: 17 lbs
Flow range: 0.26-2.6 GPM
Batch range: 0.1 to 9999 Liters (accuracy +/- 10mL)
Sensor: Mechanical vane
Power: 115/230 VAC 2A with built-in GFI
Interface: Color LCD touch panel
Environmental: IP65 splash-proof
Process connection: 1/2" FNPT inlet and outlet
Remote: N/A
GOpump10 is an intelligent pump for pumping wine or similar fluids. It can be used in "PUMP" mode where the delivery rate is automatically controlled at the user's set flow rate or in "BATCH" mode where the user's preset volume is delivered at the user's set flow rate.
Two versions are available: GOpump10 and the lower cost GOpump10-LC. The GOpump10 features a magnetic induction sensor and is Bluetooth enabled with a free companion app. The GOpump10-LC has mechanical vane sensor and does not have Bluetooth capabilities.
Usage: general purpose winery pump for transferring or filling wine. Built-in accurate totalizer provides accurate estimate of total wine transferred. Controllable flow rate allows gentle or rapid transfer of wine. Automatic shutdown on empty detection.
NOTE: Do not use with fluids containing particles larger than 100 microns. Use inlet strainer. DO NOT use to pump grape must.
Dimensions: 11.5" x 13" x 7"
Weight: 17 lbs
Flow range: 0.26-2.6 GPM
Batch range: 0.1 to 9999 Liters (accuracy +/- 10mL)
Sensor: High accuracy magnetic induction
Power: 115/230 VAC 2A with built-in GFI
Interface: Color LCD touch panel
Environmental: IP65 splash-proof
Process connection: 1/2" FNPT inlet and outlet. Tri-clamp fitting, strainer, sight glass included
Remote: Bluetooth with free mobile App
Copper bubble plate column produces higher proof distillate in a single run Borosilicate glass section can be removed to use the column as a pot still for gin, whiskey, rum, and other flavored spirits Modular, tri-clamp design for easy modification and break down for cleaning Capable of producing up to 96% ABV distillate This professional-level distillation column features a modular borosilicate glass body that allows you to watch the progress of your distilling run. It features a 4" tri-clamp connection point which can be attached to the heavy-duty Pro Sight Glass Distillation Lid. Perfectly suited to making up to 96% ABV distillate with 3000w to 3500w of power, and therefore we recommend pairing this column with the 65L BrewZilla or DigiBoil to complete the still. The modular design allows you to remove the borosilicate glass column and run it as a pot still for gins, whiskeys, grappa, brandy, and rums. This column is recommended for intermediate to advanced hobbyist distillers entering the commercial sector who want to a visual indicator of how the still is performing. New distillers are best suited to learn the basics with the AlcoEngine Reflux and AlcoEngine Pot Still range before venturing up to different types of distillation. This distillation kit is Cooling Management still, whereas the AlcoEngines are Liquid Management stills that restrict the flow of distillate, forcing a desired reflux ratio. With this design you are controlling the input of water to the RC component on the column to knock down vapors to fill the bubbler plates, taking on a small portion of the lightest vapors first and condensing them back into liquid as your final distillate. How The Bubble Plate Column Works: Vapor will come into contact with the plates and caps inside the column, causing the vapor to condense back into a liquid. This will happen at the very top of the still where the RC cooler will knock that vapor back into a liquid, causing a reflux action. As the liquid then falls down from bubbler cap to bubbler cap, the liquid that falls is eventually forced back up through the plates again. This process of being forced to run through the caps and plates multiple times creates an end product that has essentially been distilled multiple times in a single run, meaning you can get higher proof alcohol when compared to an empty column. The bubble plates perform a similar function as the copper packing in a hybrid column, but does so more efficiently. When running a bubble plate column, the first run will start in the range of 72.5%-85%. Depending on the quality of the wash, you can reach up to 95%-96% ABV, the highest-grade ethanol you can distill. Please note: There is no instruction manual. This is deemed a commercial unit for those with a license to produce alcohol. We take no responsibility for your failure to comply with your state/local legislation. Includes: (1) 4" Tri-Clamp Adapted 23.6" (600mm) Tall Borosilicate Glass Column with Threaded Tensions Rods (5) Modular Copper Bubbler Plates with Silicone Seals (1) 4" RC / Dephlegmator with 1/2" BSP Male Threads (1) 4" to 2" Tri-Clamp Reducer with 1/2" BSP Thermowell (1) 1/2" Analog Temperature Dial (1) 2" 180° Elongated Elbow (1) 2" Tri-Clamp 23.6" (600mm) Shotgun Condenser with 1/2" BSP Male Threads (1) 2" x 1.5" Tri-Clamp Reducer Not Pictured: (1) 1.5" Tri-Clover x 1/2" Female Thread Not Pictured: (1) 1/2" Male Thread x 13mm Barb (Suitable for Heavy Duty Silicone Hose) KegLand Part Number: KL25942
This 2" tri-clamp ball valve is full port and completely disassembles for easy sanitation. It is perfect for inserting a mixer into a wine tank or for mixing hops in a beer tank. No tools are required for disassembly. Simply turn the valve to the closed position, remove the 3.5" tri-clamp, remove the bottom thumb screw (drain), and tilt the ball out of the socket by rotating the top towards you. Reassemble in reverse order. Use food safe grease on all surfaces.
Note: Take care to not allow fermentation inside the valve. Do not open the valve during fermentation. The drain screw can be removed while the valve is closed to drain the valve.
2" tri-clamp
3.5" T.C. assembly
Made from 304 stainless steel
ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
Oil-based brewing system that closely mimics a large-scale steam-powered system
Heated oil is circulated around jacketed tanks to heat with a large surface area. All the benefits of steam without the complexity of a steam generator
Lower electrical requirement for installation compared to electric brewhouses with immersion elements
Insulated vessels for high heating efficiency
Compact brewing system with no need for additional electrical controllers, components, or extensive wiring. All pumps, piping, and fittings included
No heating elements in direct contact with wort. Zero risk of scorching and easy to clean
1 bbl to 3.5 bbl systems available with or without mash rake. 5 bbl and above come with mash rake as standard
7 bbl systems and above feature a brew deck and CIP ring below the mash tun to clean the underside of the mash screen
3 Vessel systems are ideal for breweries that intend to use this unit as their primary brewing system
208V, 3-phase power is the standard configuration for all systems. Customized power configurations available upon request (see below)
For detailed power specs, dimensions, and shipping quotes contact our MoreBeer! Pro sales representatives today!
Compared to the traditional steam heating brewhouse, the creative new-tech thermal oil heating avoids the installation of a dangerous and high-maintenance steam boiler. Steam offers more surface area than gas fired, but it requires a generator to create steam, collect it, and reheat it again. Oil heated brewhouses, on the other hand, use a simple oil heater and pump to circulate oil through the tank jackets. Compared to gas fired systems where all heat is directed to the very bottom of the kettle, this system heats from the sides and the bottom rather than the bottom alone. This offers not only greater surface area but faster thermal response. By controlling the oil temperature, you also have more precise boil vigor control and evaporation rate control. For these reasons and more, the Oil Heated Brewhouse makes for an ideal pilot batch system.
Control Panel
Our control panel features 4 PID controllers for precise control of the HLT, Mash, Boil Kettle and Oil temperature. The control panel also features a delayed start timer, allowing you to preheat your HLT overnight so your strike water will be ready when you arrive on brew day.
Hard Piped Distribution Manifold
With the distribution manifold, the entire brewing process can be completed by simply opening and closing valves. There’s no need to lug around brewery hoses and swap connections from vessel to vessel. This hard piped system is completely self contained with dedicated pumps to move wort and hot liquor from tank to tank as needed. Every step of the brew day is a simple valve turn away. The only hose required is from the brewing system to your fermenter. Once the brew is completed this same piping system is used for CIP and rinsing.
Installation
The systems are delivered on a skid. Simply, move the skid into place, hook up power and water and a drain and you are ready to clean and brew.
Our systems also feature rolling casters for easy installation in your brewery, product pump for recirculation and sparging, hard piped manifold, grain out door on the mash tun, and mounted plate chiller.
Optional Upgrade: MB Autopilot Control System
Take your brew day to the next level by upgrading your MB Oil Heated Brewhouse with the new MB Autopilot control system. Featuring a full touchscreen interface, Autopilot transforms our proven oil-heated system into a fully automated brewing powerhouse. Easily program every step of your process—including your mash, sparge, boil, and knockout—and save your favorite recipes to recall them instantly for unparalleled batch-to-batch consistency. With Autopilot handling the heavy lifting, precise timing, and temperature control, you can keep your hands off the panel and your eyes on the beer.
Read more about the Autopilot system on MoreBeerPro.com.
Design Features:
3-Vessel System with dedicated HLT, Mash Tun, and Boil Kettle
Compact design and easy installation
Built-in wort pump
Built-in HLT pump
Built-in 2-stage heat exchanger
Hard piped distribution manifold
Built-in control panel
PID controls for kettle temperatures and oil temperature
Slotted Mash Screen
Tangential kettle return for whirlpool
Built-in CIP
Water inlet & hot water drain in 1.5" T.C.
Insulated tanks for heat retention and heating efficiency
Boil kettle features steam collector which eliminates the need to install a flue in your brewery
Hot oil vessel can operate at higher temperatures, that means 25% higher heating efficiency:
Oil temperature set at 302°F (150℃) [available up to 572°F (300℃)]
from 82°F to 140°F (28°C to 60℃), heat-up time: 20 min
from 140°F to 176°F (60°C to 80℃), heat-up time: 20 min
from 176°F to 212°F (80°C to 100℃), heat-up time: 30 min
Higher heating efficiency compared to steam heating
Simultaneous heating of HLT, mash tun and kettle to save time
100% 304 Stainless Steel
TIG welded tanks
Laser welded dimple jacket and tank bottom
Manufactured in strictly controlled ISO9001 certified facility
208V, 3-phase power*
*MB Stainless offers custom voltage oil systems. 240V single-phase systems available up to 5bbl. MB also produces 480V 3-phase systems in all sizes. Contact our sales representatives for pricing, lead time and delivery information.
Food-grade thermal oil not included. We recommend PARATHERM™ MR HTF or an equivalent low odor, food grade, thermal transfer fluid.
An elegant combination of 304 stainless steel and non-slip silicone come together for the coffee industry's most complete commercial-grade cold brew system.
What's Included:
Cold Brew Bucket Lid
Stainless Cold Brew Basket w/ Silicone Handle
Silicone Lid
Deep Bend Pick-Up Tube
10x - High Strength Filter Bags
Specs:
Designed for 7 gal vessel volume
5 lb. max coffee grounds
3.5 gal max coffee concentrate output
Designed to pair with our iconic series of 7 gal | Brew Buckets.
The system will also work with the 7 gal | Chronical series.
Valve Tree kit designed for Brew Cubes.
Includes:
Valve Tree
(4) Pure Flow Valves (12 PSI Max)
Brew Cube to tree clamp mount
Perforated base plate
(9) 1.5" TC clamps
(1) 1.5" TC gasket
Needed for completion:
Pump
Tubing and hose barbs to connect pump to valve tree, and valve tree to vessels.
Designed to be used to connect two brew cubes of different heights together. For two cubes of equal height simply use the Brew Cube | Connection Bolts.
If you are an experienced single vessel brewer and don't use the overflow pipe. This malt pipe screen is the perfect upgrade for just that! The Gen 4 BrewZilla nixed the overflow pipe, so this is a direct replacement part for that unit.
KegLand Part Number: KL27397
Specifically designed for maximum strength and rigidity. This redesigned top screen features a hole for the probe of the RAPT Bluetooth Thermometer for monitoring and controlling your BrewZilla Gen 4. KegLand Part Number: KL27380
Rolling casters compatible with the Kreyer MiniChilly 05/09/17. Direct replacements to the rolling casters included on the MB MiniChillys (GLY405 / GLY406).
Set of 4 wheels with mounting screws included.
