Beer Bottling & Kegging

No capper required! Make your bottling day easier by skipping the capping step all together The perfect bottle for a wide range of homemade beverages including beer, cider, mead, kombucha, and more! Pressure rated to 100 PSI which means they can easily handle the carbonation of soda pop and hard seltzer E.Z.Cap is the authentic North American swing-top glass bottle manufacturer The included Swing Top closure is reusable and can be replaced as needed A revolution in Beer Bottling!  The convenience of a swing top, hybridized with the storage capabilities of a standard crown cap; Meet the EZ Cap Bottle.  These swing tops are designed to be primarily sealed with a crown cap closure for long term storage.  Once you crack your brew for consumption however, you have the swing top in place to close it back up if need be!  Whether you're too distracted with other fine brews to taste, or just need to wait your turn at the beer pong table, this is a perfect system for you. Bottles rated to 100 PSI. Case of 12 x 32 oz Amber EZ Cap Bottles and 12 Swing Tops.  Crown Caps not included (see recommended items below for options).

Read more less

Starts siphon with a single stroke Made from BPA-free acrylic plastic Includes anti-sediment tip Easy to dissasemble for cleaning and drying 7/8" outer diameter fits glass carboys, 1-gallon jugs or Growlers The name says it all! No more struggling with all the different techniques to get a siphon started. The Easy-Siphon will get your transfer started quickly and with zero fuss. Simply submerge the the siphon, pull the inner tube up about halfway, then pump down to start the siphon. New design features 7/8" OD racking tube to better fit carboys, 1-gallon jugs, or growlers. To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet. Comes with 3/8" cane and 24" racking tube. 5/16" or 3/8" ID tubing must be purchased separately. Also available in 1/2" and 3/8" Mini models. Maximum Temperature: 140°F (60°C) Instructions:  Sanitize and rinse your Easy-Siphon.  Get the inner tube gasket and the outer tube wet.  Attach the curved siphon to a hose.  Submerge the end of Easy-Siphon into your container.  If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to.  Pull the inner tube up about 7" until the liquid fills the tube.  Pump the inner tube down and siphon will begin.  Pull out inner tube and sanitize Easy-Siphon for storage.  This product is not resistant to high levels of alcohol. Do not sanitize with alcohol. Acrylic is safe for long exposure to ABV up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into liquid. If you need to exceed these limits, we recommend using a stainless racking cane.

Read more less

Give your homebrewed Belgians an authentic finishing touch!    You will love the old world look you get when you seal your Belgian beer bottles with corks and a wire hood. These corks are made specifically for use with Belgian beer bottles. Our corks are brewery-grade. They are also very dense and give a great seal. They work well with our Floor Corker (W410). A hand corker will not work with these corks.    A long-time customer - John Francisco - told us a tip that he uses when he corks his Belgian beers - put a #7 stopper (FE440) over the plunger rod of the corker so that only 1 3/4" of the rod is exposed. This will stop the cork from going into the bottle too far. A wire hood can then be fastened over the remaining 6/8" - 7/8" of cork sticking out of the bottle. We have tried this and it works great!    Attention: These corks come sanitary in the bag ready to be corked into a bottle. Do not sanitize or boil these or you will ruin the integrity of the cork.  1 5/8" L x 1" D 

Read more less

Black Screw Cap for 64oz and 32 oz screw top growlers and jugs.  Featuring a specialized liner that reduces oxygen transfer, this cap will keep your beer fresh and carbonated. 38/400 CT - Fits all standard growlers.  

Read more less

Belgian or Sparkling style glass beer bottles High pressure rating to withstand highly carbonated sours, Belgian-style beers, or sparkling wine 750mL capacity makes them ideal of cellaring your most precious creations Two cases of 12 bottles are enough to package just over 4.5 gallons of finished beer 26mm crown cap finish. Can also be corked using a champagne style cork with cage These high-quality Belgian / Champagne style bottles can be capped with standard crown caps (26mm). Bottle Specifications: Capacity: 750 ml  Weight: 1.5 lb Height: 11.9 inches Outside Diameter: 3.3 inches Pressure Rating: Up to 5.5 volumes of carbonation.

Read more less

The first time a brewer tries out the FastRack system they always say the same thing to themselves: “That is a thing of beauty!”   Because it’s made to hold wine bottles, the FastRack Wine Bottle Drying Rack & Storage System is just the right size for your 22oz beer bottles! It is the cleanest way to drain, stack, and store your empties. When bottling, use the FastRack to hold your bottles after sanitizing, and have them ready at hand to fill with your delicious homebrew!  The FastRack Wine takes up far less space than a bottle tree.   We sell the Fast Rack in a handy combo pack, consisting of 1 Tray and 2 Racks, which is perfect for a 5 gallon batch. We also sell the individual components for larger batches and storing more cases!    Each FastRack Wine Rack holds 12 x 22 oz (or 750 ml) bottles.   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

Wire hoods are a key part of any Belgian-style bottling. Not only do they complete the look of the bottle, but they are required to keep the mushroom cork in place once the carbonation builds up. Apply them easily with a Wire Hood Fastener giving the hood 5 1/2 turns.

Read more less

What does this bottle filler have that the rest don't? A removable tip and spring that make this model easily sanitized. Plus, the spring inside can be removed if you prefer the action of a springless bottle filler. The actual "wand" on the filler is 12 inches long.

Read more less

Save time and remove the guesswork on bottling day with Pop Shots Carbonation Tablets! No need to measure out and mix corn sugar to make a priming sugar solution Simply add the recommended number of sugar tablets based on the volume of your bottle One bag is enough to carbonate 5 gallons of bottled beer Make bottling day a breeze and add Pop Shots to your 12 oz, 16 oz, or 22 oz bottles to make carbonation easy! Tested in-house, our Pop Shots are formulated to ensure your beverage achieves carbonation. After adding your Pop Shots, please store your bottle at room temperature for 1-2 weeks to allow carbonation to take place. Dosage: 12 oz Bottles - 3 Pop Shots 16 oz Bottles - 4 Pop Shots 22 oz Bottles - 5 Pop Shots Approximately 175 Pop Shots per bag.

Read more less

Starts siphon with a single stroke Made from BPA-free acrylic plastic Includes anti-sediment tip Easy to dissasemble for cleaning and drying 7/8" outer diameter fits glass carboys, 1-gallon jugs or Growlers The name says it all! No more struggling with all the different techniques to get a siphon started. The Easy-Siphon will get your transfer started quickly and with zero fuss. Simply submerge the the siphon, pull the inner tube up about halfway, then pump down to start the siphon. New design features 7/8" OD racking tube to better fit carboys, 1-gallon jugs, or growlers. To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet. Comes with 1/2" cane and 24" racking tube. 7/16" or 1/2" ID tubing must be purchased separately. Also available in 3/8" and 3/8" Mini models. Maximum Temperature: 140°F (60°C) Instructions:  Sanitize and rinse your Easy-Siphon.  Get the inner tube gasket and the outer tube wet.  Attach the curved siphon to a hose.  Submerge the end of Easy-Siphon into your container.  If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to.  Pull the inner tube up about 7" until the liquid fills the tube.  Pump the inner tube down and siphon will begin.  Pull out inner tube and sanitize Easy-Siphon for storage.  This product is not resistant to high levels of alcohol. Do not sanitize with alcohol. Acrylic is safe for long exposure to ABV up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into liquid. If you need to exceed these limits, we recommend using a stainless racking cane.

Read more less

Bringing a 6-pack to the party is great, but nothing increases your social clout like showing up with a growler freshly filled with your latest creation. Keep a growler or two on hand for the next time you transport your homebrew or slide down to the local brewpub for a refill. Sold individually or in a case of 6. Bottle Specifications: Capacity: 64 fl Oz.  Weight: 2.43 lb Height: 10.94 inches Outside Diameter: 4.97 inches Not for pasteurization. For refill use only. Please Note: Caps are not included. See related products below for options. 

Read more less

No capper required! Make your bottling day easier by skipping the capping step all together The perfect bottle for a wide range of homemade beverages including beer, cider, mead, kombucha, and more! Pressure rated to 100 PSI which means they can easily handle the carbonation of soda pop and hard seltzer E.Z.Cap is the authentic North American swing-top glass bottle manufacturer The included Swing Top closure is reusable and can be replaced as needed These swing top bottles are a revolution in Beer Bottling!  The convenience of a swing top, hybridized with the storage capabilities of a standard crown cap; Meet the EZ Cap Bottle.  These swing tops are designed to be primarily sealed with a crown cap closure for long term storage.  Once you crack your brew for consumption however, you have the swing top in place to close it back up if need be!  Whether you're too distracted with other fine brews to taste, or just need to wait your turn at the beer pong table, this is a perfect system for you. Bottles rated to 100 PSI. Case of 12 x 16 oz Amber EZ Cap swing top bottles and 12 Swing Tops.  Crown Caps not included (see recommended items below for options).

Read more less

Bottle washers make clean up and bottle maintenance much easier to deal with!  Using one of our bottle washers is definitely the fastest way to clean bottles and carboys. Works great on build up!   Our stainless bottle washer creates a jet-style stream that penetrates build-up in bottles or carboys. It is automatically activated when a bottle is pressed down onto the unit. Female hose thread connection.

Read more less

Give yourself peace of mind with this Reinforced Vinyl Brewing Tubing! This 1/2" Reinforced Vinyl Tubing is FDA approved, food grade, rated to 158 degrees F, and 200 PSI. It is the perfect tubing to use in your homebrewery with our pumps, or anywhere you want the extra security that your tubing will not kink or burst. This type of tubing is essential when putting back pressure on a system. Standard vinyl tubing and silicone are great for their own purposes, but are not designed to handle pressure, and can balloon up or explode if too much pressure is used. 1/2" ID and 3/4" OD  

Read more less

The Bottle Tower features a rotating base and convenient drain port. Comes standard with 5 inserts for a total of 45 seats. With added inserts the bottle tree can hold as many as 90 bottles at a time. Easily assembles and breaks down for storage. With a 3/8" OD drain outlet on the base, you can attach tubing so the base automatically drains to a nearby sink. The Monster Cleaner (B526) can be attached to the top insert for a complete cleaning and drying station. Please note the example photos show extra inserts added to the bottle tree. The 45-seat tree comes standard with 5 inserts. We do not recommend using more than 10 inserts (B528) per Bottle Tower. You can install a hose if you wish to drain it directly to a sink (5/16” ID hose) Top of the bottle drainer will take our Monster Cleaner with no adapter required. PET carboys and FerMonsters™ could be placed on top to drain them. Rotational base BPA free. Made with food grade materials    

Read more less

Makes managing sanitized bottles for a whole batch easy, and lets you get the bottling mess out of the kitchen--no more using the dishwasher rack to hold sanitized bottles. The Rotating Bottle Tree holds 45 bottles. It will simplify the bottling process. Just rinse the bottles out well after use and store upside down on the bottle tree where they remain clean. When you want to bottle, use the optional Sanitized Injector (B520) to spray sanitizing solution, such as Star San or SaniClean, into the bottles to sanitize. Wait 1 minute and bottle. You can also do the sanitizing ahead of time and let the bottles air dry upside down. Made by Ferrari Group in Italy.

Read more less

The Monster Cleaner injector easily sanitizes a wide range of bottles and other vessels. Clean beer bottles, wine bottles, and growlers. And with the adapter piece in place, you can use the Monster Cleaner with glass jugs, hydrometer jars, racking canes, siphons, and graduated cylinders. Easy to assemble and a breeze to use and clean. It also acts as a versatile addition to the top of the Bottle Tower (B527) with no adapter required. May also be used independently on any flat surface. Included adapter for use with any container up to 55 mm (2.1") in neck diameter Works with a wide range of bottles including PET beer bottles, wine bottles, and champagne bottles Conveniently fits on top of The Bottle Tower with no adapter required 50% more sanitizer capacity than competing models Size is perfect to sanitize Growlers and Gallon Jugs Flexible base (basin) made with high impact materials to stand drops up to 12 feet in height Made with food grade materials BPA free  

Read more less

Plastic screw caps for growlers and wine jugs. Standard 38 mm size (38/400 thread) for growlers, 1/2 gallon, 1 gallon, and 4 Liter wine jugs. White color with foam liner.

Read more less

Completely impervious to oxygen and sunlight and made from 304 stainless steel, this growler is one of the best storage options for beer. This growler comes with a double wall vacuum insulation keeping your delicious beer cold for hours. The spring wired lid makes this growler capable of holding up to 30 psi. This is a smokin deal when compared to other double wall growlers. Dimensions: 4.75 in. Diameter x 12 in. Height; Holds 2L or 67 oz Draft Kit is out now! Kegland Part number: KL04282

Read more less

Easily connects the Bottle & Carboy Washer (CE10) to most kitchen sink faucets. Stainless steel construction. Comes with two washers. For outside threaded faucets use adapter with only one washer; for inside threaded spout use both washers. Simply unscrew the screen assembly at the end of your faucet and screw the adapter in place. Bottle & Carboy Washer sold separately.

Read more less

For restricting flow on 3/8'' tubing. Color may vary.

Read more less

Replacement gaskets for the EZ Cap bottles. 12 gaskets per order.

Read more less

FDA approved food grade tubing for transferring liquids. Made of Vinyl (PVC). Will not impart flavors or odors into your product. 7/16 inch ID tubing is recomended for use with 1/2 inch Auto Siphons. Thin wall tubing is recomended for siphoning and transferring liquids. For pumping, keg lines, or other pressurized applications, see our thick wall and keg tubing.  

Read more less

This simple drain tube will keep the mess to a minimum when using the Tapcooler Counter Pressure Bottle Filler! Attaches directly to the Tapcooler's PRV so overfill beer and foam can drain out to a bucket or nearby sink. Measuring 39" long, the end of the tube can be placed in a growler or other receptacle so you can keep filling bottles without spillage!  

Read more less

Perfect size for siphoning or bottling from a gallon jug.  Takes 5/16" tubing (see YMAN section below). Instructions: Sanitize and rinse your Auto Siphon. Get the inner tube gasket and the outer tube wet. Attach the curved siphon to a hose. Submerge the end of Auto Siphon into your container. If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to. Pull the inner tube up until the liquid fills the tube. Pump the inner tube down and siphon will begin. Pull out the inner tube and sanitize your Auto Siphon for storage. Our standard 1/2" racking cane tips will work with this product, see our You Might Also Need section below for product information.

Read more less

The newest wing capper on the market is the Kelly, made by the Ferrari Group in Italy.  We love this capper because it is easy to use, has a smooth capping action, a magnet in the capping head to hold crown caps, and solid metal jaws to firmly grasp the bottle. Sized for standard 26 mm crown caps.

Read more less

Keep these replacement rubber washers on hand to ensure you always have a perfect seal.   When you're bottling, you don't want to be caught without spare washers for your swing top bottles. Whether your current washers are old and cracked, or you just can't quite get a perfect seal, these replacement washers will have you covered. 

Read more less

Siphon starter for transferring liquids and bottling. Very easy to use and sanitize. A single stroke starts the siphon without disturbing the sediment. Precision designed for smooth, leak-free operation. The Regular Auto Siphon is recommended for use with standard buckets and carboys. We strongly recommend you use 5/16 in ID tubing (not 3/8 in) to prevent air leaks from stopping the siphon. Outer diameter of the siphon shaft is 7/8 inches.

Read more less

Give your homebrew that final touch: A six pack carrier that you can customize!   With this white 6 Pack Carrier for glass bottles, you can give your homebrew a professional presentation. Simply create your own custom graphics and logo, then present it to your amazed family and friends! A great idea for gifts.    White, for 12 oz bottles.

Read more less

This 11-inch extension tube that hooks directly into an Intertap beer faucet! If you're draft setup features Intertap or Nukatap forward-sealing faucets, this extension tube will offer more flexibility and range when bottling with the Tapcooler Counter Pressure Bottle Filler! This extension tube has an Intertap/Nukatap faucet adapter that screws directly into the faucet on one end, and the other end hooks up to the Tapcooler unit so you can have a range of motion for bottling away from the faucet. A small silicone o-ring is provided to seal the connection between the filler unit and the connection hose. Attachments are made from Stainless Steel and connected by food grade beverage tubing. Tapcooler and faucet not included.  

Read more less

12-seat 2-in-1 Bottle Washer compatible with popular beer, wine, and PET bottles when paired with the appropriate bottle tray Garden hose adapter included to easily rinse bottles or purge them of oxygen with the Gas Purging Adapter Stack up to 4 trays of matching bottles while drying The Vintage Shop has been a pioneer in the manufacturing of products for the home wine and beer industry since 1969 Pair with either the Glass Bottle Tray or PET Bottle Tray (sold separately) Cleans dozens of bottles quickly! Imagine a system that lets you sanitize bottles 12 at a time, temporarily store them while they drain upside down, and then flush them with inert gas prior to filling. This bottle rinsing base and rack system is your dream come true! The base portion of the system connects to a water supply for rinsing or to your inert gas system for purging/flushing. In our ideal plan you have two bases. One is used for rinsing, the other, sitting right next to it, is used for purging. You can put the rinsing base in a tub that is re-circulating with sanitizing solution (such as: CL27) or just drain to the ground if you are working outside. *Note: Bottle Racks are sold separately. You will need to buy as many racks (CE971) as needed. Each rack holds 12 bottles. Comes with a female garden hose fitting attached to a plastic 1/2" barb fitting on the unit. 12.25" L x 10.75" W x 3" H Max Temp: 167° F (75° C)

Read more less

No capper required! Make your bottling day easier by skipping the capping step all together The perfect bottle for a wide range of homemade beverages including beer, cider, mead, kombucha, and more! Pressure rated to 100 PSI which means they can easily handle the carbonation of soda pop and hard seltzer Pop Cultures is helping people experience the joy and satisfaction of making and sharing homemade creations Swing top closures are included, reusable, and can be replaced as needed PopTops™ Swing Top Bottles from Pop Cultures provide the best of both worlds when it comes to bottling! They provide the ease and flexibility of flip top bottles, with the added ability to cap for shelf stability.  These attractive and robust bottles are ideal for whatever beverage tickles your fancy. Whether you got hooch, booch or beer, it's all good in here. No capper or additional equipment required when using the swing tops. Resealable, reusable and recyclable (though you will never want to get rid of these bottles!). Bottles rated to 100 PSI. Case of 12 x 16 oz Amber Pop Tops Bottles with Swing Tops.  Crown Caps not included (see recommended items below for options).

Read more less

Bottle directly from your ball lock or pin lock keg with this optional Tapcooler accessory. Features a 1/4" swivel nut at one end to connect to a flared disconnect (not included) and a ball valve at the other. Simply remove the faucet fitting on the Tapcooler filler, attach the valve end, attach a ball lock or pin lock disconnect into the included swivel nut set on the tubing, and hook up to your keg. The valve acts as the beer faucet normally would, starting and stopping flow directly from the keg. The attached tubing is 6.5 feet long, giving you plenty of versatility in your bottling range. Another great accessory from Tapcooler! Tapcooler and ball lock disconnect not included.  

Read more less

12-seat bottle tray designed for glass beer & wine bottles to be used with The Vintage Shop 2-in-1 Bottle Washer Use with the 2-in-1 Bottle Washer to rinse bottles or purge them of oxygen with the Gas Purging Adapter Stack up to 4 trays of matching bottles while drying Swing top bottles will fit after removing the wire swing top The Vintage Shop has been a pioneer in the manufacturing of products for the home wine and beer industry since 1969 Fits most sink sizes and popular glass bottles Please also read description for CE970 as this is a two part kit. An awesome way to have your bottles ready to go! This rack will have your bottling session running smoothly, with as little handling as necessary. Load up to 12 bottles upside down at one time. These racks then sit down on the base to either rinse or gas flush the bottles, depending on what you have hooked up to the base (water or inert gas.) Will hold a wide variety of bottles. Swing top bottles will fit if wire swing top is removed. 15.25" L x 11" W x 4 5/8" H Max Temp: 167° F (75° C)

Read more less

Ferrari Deluxe bench capper with adjustable spring loaded head. Head can be easily moved by pressing the black button on the side and sliding the capping mechanism up or down. Also referred to as Ferrari Delux or Super Agata.

Read more less

Unlike standard low-end bottle fillers, the Vintage Shop's springless model uses a plastic valve instead of a spring to seal. The springs are not made from a food grade quality metal. Fillers will work with 12 or 22oz bottles. Use with 1/2" tubing. Larger 1/2" diameter and increased flow is good for wine applications.

Read more less