Our Phantasm Powder hazy recipes are bursting with a tropical bouquet complimented by a choice selection of New Zealand and Pacific Northwest hops
Includes Mosaic®, Amarillo®, Cascade, Talus®, Vic Secret, Strata, Idaho 7®, Riwaka™, and Sabro™ hops
Estimated ABV: 8.2%
Estimated IBUs: 42
Makes 5 gallons of finished beer
If you're hearing ghostly tales whispered around your local homebrew shop, there's no need to pile your brew crew into the hippy van—this one is no mystery. Phantasm Powder has been causing quite a stir on the craft beer scene, and the buzz is well deserved. Adding this powder to your wort and fermenting it with a thiolized yeast strain is one of the easiest ways to boost tropical flavor and aroma in your finished beer. Derived from Marlborough Sauvignon Blanc Grapes, this powder will add a concentrated dose of thiol precursors. During fermentation, yeast will go to work on these aroma compounds and "free the thiol", boosting the tropical bouquet of your beer to supernatural levels. We're stoked to get this cutting-edge ingredient into the hands of homebrewers so we designed a series of Phantasm recipe kits that will set you up to take full advantage of brewing with Phantasm Powder.
Our Phantasm Hazy Double IPA includes 10 ounces of aroma hop additions from whirlpool to biotransformation to post fermentation, leaning on some choice New Zealand and American varietals and turns it up a notch with two additions of Cryo Hops® for an extra concentrated kick of hoppy goodness. Since this kit series is all about the thiols, we start with whole cone Mosaic in the mash to further increase the thiol precursors. Add the Phantasm Powder at flameout along with your whirlpool / hop stand additions. For maximum effect, we highly recommend choosing a thiolized yeast strain for fermentation which are specifically designed to boost thiol biotransformation.
Makes 5 gallons
Estimated Original Gravity: 1.075-80
SRM (Color Range): 4-5
IBUs: 42
Estimated Original Gravity: 8.2%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Our Phantasm Powder hazy recipes are bursting with a tropical bouquet complimented by a choice selection of New Zealand and Pacific Northwest hops
Includes Mosaic®, Amarillo®, Cascade, Talus®, Vic Secret, Strata, Idaho 7®, Riwaka™, and Sabro™ hops
Estimated ABV: 8.2%
Estimated IBUs: 42
Makes 5 gallons of finished beer
If you're hearing ghostly tales whispered around your local homebrew shop, there's no need to pile your brew crew into the hippy van—this one is no mystery. Phantasm Powder has been causing quite a stir on the craft beer scene, and the buzz is well deserved. Adding this powder to your wort and fermenting it with a thiolized yeast strain is one of the easiest ways to boost tropical flavor and aroma in your finished beer. Derived from Marlborough Sauvignon Blanc Grapes, this powder will add a concentrated dose of thiol precursors. During fermentation, yeast will go to work on these aroma compounds and "free the thiol", boosting the tropical bouquet of your beer to supernatural levels. We're stoked to get this cutting-edge ingredient into the hands of homebrewers so we designed a series of Phantasm recipe kits that will set you up to take full advantage of brewing with Phantasm Powder.
Our Phantasm Hazy Double IPA includes 10 ounces of aroma hop additions from whirlpool to biotransformation to post fermentation, leaning on some choice New Zealand and American varietals and turns it up a notch with two additions of Cryo Hops® for an extra concentrated kick of hoppy goodness. Since this kit series is all about the thiols, we start with whole cone Mosaic in the mash to further increase the thiol precursors. Add the Phantasm Powder at flameout along with your whirlpool / hop stand additions. For maximum effect, we highly recommend choosing a thiolized yeast strain for fermentation which are specifically designed to boost thiol biotransformation.
Makes 5 gallons
Estimated Original Gravity: 1.075-80
SRM (Color Range): 4-5
IBUs: 42
Estimated Original Gravity: 8.2%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Our Phantasm Powder hazy recipes are bursting with a tropical bouquet complimented by a choice selection of New Zealand and Pacific Northwest hops
Includes Cascade, Strata, Wai-iti, Nelson, Citra®, Mosaic®, and Motueka hops
Estimated ABV: 7.7%
Estimated IBUs: 28
Makes 5 gallons of finished beer
If you're hearing ghostly tales whispered around your local homebrew shop, there's no need to pile your brew crew into the hippy van—this one is no mystery. Phantasm Powder has been causing quite a stir on the craft beer scene, and the buzz is well deserved. Adding this powder to your wort and fermenting it with a thiolized yeast strain is one of the easiest ways to boost tropical flavor and aroma in your finished beer. Derived from Marlborough Sauvignon Blanc Grapes, this powder will add a concentrated dose of thiol precursors. During fermentation, yeast will go to work on these aroma compounds and "free the thiol", boosting the tropical bouquet of your beer to supernatural levels. We're stoked to get this cutting-edge ingredient into the hands of homebrewers so we designed a series of Phantasm recipe kits that will set you up to take full advantage of brewing with Phantasm Powder.
Our Phantasm Hazy IPA packs a 10-ounce wallop of New Zealand and Pacific Northwest aroma hop additions. We selected some of our favorite varietals that will provide a juicy, citrusy, tropical punch blast—harmonizing perfectly with Phantasm Powder. Since this kit series is all about the thiols, we start with whole cone Cascade in the mash to further increase the thiol precursors. Add the Phantasm Powder at flameout along with your whirlpool / hop stand additions. For maximum effect, we highly recommend choosing a thiolized yeast strain for fermentation which are specifically designed to boost thiol biotransformation.
Makes 5 gallons
Estimated Original Gravity: 1.069-74
SRM (Color Range): 4-5
IBUs: 28
Estimated Original Gravity: 7.7%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Our Phantasm Powder hazy recipes are bursting with a tropical bouquet complimented by a choice selection of New Zealand and Pacific Northwest hops
Includes Cascade, Strata, Wai-iti, Nelson, Citra®, Mosaic®, and Motueka hops
Estimated ABV: 7.7%
Estimated IBUs: 28
Makes 5 gallons of finished beer
If you're hearing ghostly tales whispered around your local homebrew shop, there's no need to pile your brew crew into the hippy van—this one is no mystery. Phantasm Powder has been causing quite a stir on the craft beer scene, and the buzz is well deserved. Adding this powder to your wort and fermenting it with a thiolized yeast strain is one of the easiest ways to boost tropical flavor and aroma in your finished beer. Derived from Marlborough Sauvignon Blanc Grapes, this powder will add a concentrated dose of thiol precursors. During fermentation, yeast will go to work on these aroma compounds and "free the thiol", boosting the tropical bouquet of your beer to supernatural levels. We're stoked to get this cutting-edge ingredient into the hands of homebrewers so we designed a series of Phantasm recipe kits that will set you up to take full advantage of brewing with Phantasm Powder.
Our Phantasm Hazy IPA packs a 10-ounce wallop of New Zealand and Pacific Northwest aroma hop additions. We selected some of our favorite varietals that will provide a juicy, citrusy, tropical punch blast—harmonizing perfectly with Phantasm Powder. Since this kit series is all about the thiols, we start with whole cone Cascade in the mash to further increase the thiol precursors. Add the Phantasm Powder at flameout along with your whirlpool / hop stand additions. For maximum effect, we highly recommend choosing a thiolized yeast strain for fermentation which are specifically designed to boost thiol biotransformation.
Makes 5 gallons
Estimated Original Gravity: 1.069-74
SRM (Color Range): 4-5
IBUs: 28
Estimated Original Gravity: 7.7%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Our Phantasm Powder hazy recipes are bursting with a tropical bouquet complimented by a choice selection of New Zealand and Pacific Northwest hops
Includes Cascade, Citra®, Motueka, Mosaic®, and Nelson hops
Estimated ABV: 5.8%
Estimated IBUs: 22
Makes 5 gallons of finished beer
If you're hearing ghostly tales whispered around your local homebrew shop, there's no need to pile your brew crew into the hippy van—this one is no mystery. Phantasm Powder has been causing quite a stir on the craft beer scene, and the buzz is well deserved. Adding this powder to your wort and fermenting it with a thiolized yeast strain is one of the easiest ways to boost tropical flavor and aroma in your finished beer. Derived from Marlborough Sauvignon Blanc Grapes, this powder will add a concentrated dose of thiol precursors. During fermentation, yeast will go to work on these aroma compounds and "free the thiol", boosting the tropical bouquet of your beer to supernatural levels. We're stoked to get this cutting-edge ingredient into the hands of homebrewers so we designed a series of Phantasm recipe kits that will set you up to take full advantage of brewing with Phantasm Powder.
Our Phantasm Hazy Pale Ale features a 50/50 split of New Zealand and Pacific Northwest aroma hop additions that lean into a tropical, citrusy character that will pair perfectly with Phantasm Powder. Since this kit series is all about the thiols, we start with whole cone Cascade in the mash to further increase the thiol precursors. Add the Phantasm Powder at flameout along with your whirlpool / hop stand additions. For maximum effect, we highly recommend choosing a thiolized yeast strain for fermentation which are specifically designed to boost thiol biotransformation.
Makes 5 gallons
Estimated Original Gravity: 1.054-59
SRM (Color Range): 3-4
IBUs: 22
Estimated Original Gravity: 5.8%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Our Phantasm Powder hazy recipes are bursting with a tropical bouquet complimented by a choice selection of New Zealand and Pacific Northwest hops
Includes Cascade, Citra®, Motueka, Mosaic®, and Nelson hops
Estimated ABV: 5.8%
Estimated IBUs: 22
Makes 5 gallons of finished beer
If you're hearing ghostly tales whispered around your local homebrew shop, there's no need to pile your brew crew into the hippy van—this one is no mystery. Phantasm Powder has been causing quite a stir on the craft beer scene, and the buzz is well deserved. Adding this powder to your wort and fermenting it with a thiolized yeast strain is one of the easiest ways to boost tropical flavor and aroma in your finished beer. Derived from Marlborough Sauvignon Blanc Grapes, this powder will add a concentrated dose of thiol precursors. During fermentation, yeast will go to work on these aroma compounds and "free the thiol", boosting the tropical bouquet of your beer to supernatural levels. We're stoked to get this cutting-edge ingredient into the hands of homebrewers so we designed a series of Phantasm recipe kits that will set you up to take full advantage of brewing with Phantasm Powder.
Our Phantasm Hazy Pale Ale features a 50/50 split of New Zealand and Pacific Northwest aroma hop additions that lean into a tropical, citrusy character that will pair perfectly with Phantasm Powder. Since this kit series is all about the thiols, we start with whole cone Cascade in the mash to further increase the thiol precursors. Add the Phantasm Powder at flameout along with your whirlpool / hop stand additions. For maximum effect, we highly recommend choosing a thiolized yeast strain for fermentation which are specifically designed to boost thiol biotransformation.
Makes 5 gallons
Estimated Original Gravity: 1.054-59
SRM (Color Range): 3-4
IBUs: 22
Estimated Original Gravity: 5.8%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Take Your Beers Tropical Bouquet to The Next Level 50-200x Boost in Thiols When Used with Thiolized Yeast Strain Contains Thiol Precursors Derived From Marlborough Sauvignon Blanc Grapes Maximize Flavor and Aroma with Cutting Edge Brewing Technology Phantasm helps you unlock unreal natural flavors in your fermentation. Derived from the legendary Marlborough Sauvignon Blanc Grapes, Phantasm is a Thiol precursor powder that in the right fermentation conditions will unlock large amounts of free thiols like 3SH bringing tropical, passionfruit aromas to your beer. Thiols pair exceptionally well with Esters and Terpenes and can bring depth and complexity to a range of styles including IPA, Lagers and Mixed Fermentation. For best results, add Phantasm during the whirlpool at rates of 1 – 2 lbs per bbl (1 – 2.5 oz per 5-gallon batch) and ferment with a thiolized yeast strain. Phantasm will bring a touch of fermentables to your beer, around 0.3°P (1.0012 SG) alongside a slight pH drop. In discussion with the creator of Phantasm Jos Ruffell, we talked about the dosage rates varying. The market had a dosage rate recommendation of 2.5oz per 5 gallons. Especially when using the latest thiol boosting yeasts from Omega you don't specifically need 2.5oz as even 1 oz is going to provide a significant thiol boost. So we packaged it down in 1oz increments so that you can decide exactly how much you want to put in. For us here at MoreBeer! 1 oz provides a nice boost and is a reasonable cost per batch. If you want to go extreme feel free to add more. Ingredients: Marlborough Sauvignon Blanc Grapes Country of Origin: New Zealand Recommended Thiolized Yeast Strains: Omega Yeast - Cosmic Punch Ale (OYL402) Omega Yeast - Lunar Crush Lager (OYL403) Omega Yeast - Star Party Ale (OYL404) Omega Yeast - Helio Gazer Ale (OYL405)
Replacement jar of phenolphthalein indicator for the W501 Acid Test Kit. This phenolphthalein is suitable for acid test kits from other suppliers as well. Phenolphthalein will often turn colorless in acidic solutions and red in basic solutions.
10% concentration. Phosphoric acid is said to be tasteless while lactic in large quantities can potentially leave flavor. Being a lower conentration than the Lactic, it is slower to change the pH of your water and therefore more forgiving to use.
Phosphoric Acid 25% - 1 oz. For use with our MT140 Aeration Oxidation test for Free SO2. 11.13 Normal. 1oz size is good for 3 tests. We recommend trying to source this acid locally through a chemical supply company, as we are not able to ship larger quantities due to them being classified as a hazardous materials shipment.
The Pico digital scale is great for measuring out small amounts of hops or chemicals for winemaking, brewing, and other uses. It has the same capacity as the "Primo" scale, but with a smaller footprint.
The Pico measures up to 18 ounces (500 gram) in 0.005 ounce (0.1 gram) increments. It has a "Tare" feature for subtracting the weight of the container from the net weight of the contents. The Pico also has a counting feature to count small items with accuracy. Includes 1 9-volt battery.
1.6-2.3 °L - BestMalz - BestMalz's Pilsen is malted from choice, well modified, low-protein German barley. The resultant beers are light colored, clean, full-bodied and malty. Perfect for Pilsners and Kölsch, Wits, and Tripels. Works well for malt focused beers, as the clean character will allow for the full flavor of specialty malts to shine. Malt Specification: Moisture % - max. 5 Extract fine % dm - min. 76 Color °L - 1.6-2.3 Protein % dm - max. 11.5 If this malt is currently out of stock or you'd like to try out a different maltster, please see the substitution chart below. Viking Malt - Pilsner GR90 Briess Malting - Pilsen GR31 Canada Malting - Superior Pilsen GR671 Great Western Malting - Superior Pils GR309 Weyermann® Specialty Malts - German Pilsner GR310 Weyermann® Specialty Malts - Bohemian Pilsner GR347 Dingemans Malting - Belgian Pilsner GR340 Rahr Malting - North Star Pils™ GR313 Admiral Maltings - Admiral Pils GR710
1.2° L - Briess Malting - Briess Pilsen is their lightest colored base malt available. It will produce a very light colored, clean and crisp wort with a delicate malty flavor. Excellent choice as a 2-row base malt for all beer styles, particularly lagers. Great for malt focused beers, as it's clean character allows for the full flavor of specialty malts to shine through.
See attached Document for Typical Malt Analysis
If this malt is currently out of stock or you'd like to try out a different maltster, please see the substitution chart below.
Viking Malt - Pilsner
GR90
Rahr Malting - North Star Pils™
GR313
Canada Malting - Superior Pilsen
GR671
Great Western Malting - Superior Pils
GR309
Weyermann® Specialty Malts - German Pilsner
GR310
Weyermann® Specialty Malts - Bohemian Pilsner
GR347
Dingemans Malting - Belgian Pilsner
GR340
BestMalz - Pilsen
GR414
Admiral Maltings - Admiral Pils
GR710
1.7-2.0 °L - Viking Malt - Pils is a traditional European Pilsner malt with a delicate malt sweetness that gives your lagers that extra something special. Viking Pils is the perfect base for all lagers and essential for Pilsners, Helles, Marzen, Bock, Vienna Lager, etc. When your making light lagers most brewers want the pils base malt to provide a bit of maltiness. It can be the difference between boring beer and amazing beer. We have gotten great feedback from pro brewers and many have switched to Viking after trying it. We also have several craft breweries using this malt for the commercial production of light colored Pales, IPA's, and Hazys. When compared to our Viking Xtra Pale the flavor of the Pils malt is just a bit lighter. Some brewers love this for their really light colored ales that are bursting with hop flavors. Viking Malt is one of the largest malting companies in the world and the largest roaster of specialty malts. They are the main malt supplier to the famous Carlsberg brewery. Viking is not well known in the USA because they haven't had good US distribution. Because MoreBeer! and MoreBeer! Pro is directly importing thousands of tons of malt we are stoked to offer you Northern European malt quality from one of the best malting companies in the world at lower than domestic malt pricing. Viking Malt has 6 malthouses in areas where distinctive Nordic barley are sourced: in Halmstad, Sweden; Vordingborg, Denmark; Lahti, Finland; Panevezys, Lithuania and in Sierpc and Strzegom, Poland. The advantage of northern European malt is lower protein levels, good kernel size, and less amount of pesticides used due to the cold winters. Malt Specification: Moisture % - max. 5.0 Extract fine % dm - min. 80.0 Color °L - 1.7-2.0 Protein % dm - max. 11.5 Sol. nitrogen mg/100 g - 600–750 Free amino nitrogen mg/l - 130–170 Beta-glucan mg/l - max. 200 Friability % - min. 80 Diastatic power WK dm - min. 250 See the Documents tab below for Product Information and Typical Analysis. If this malt is currently out of stock or you'd like to try out a different maltster, please see the substitution chart below. Briess Malting - Pilsen
GR31 Rahr Malting - North Star Pils™ GR313 Canada Malting - Superior Pilsen GR671 Great Western Malting - Superior Pils GR309 Weyermann® Specialty Malts - German Pilsner GR310 Weyermann® Specialty Malts - Bohemian Pilsner GR347 Dingemans Malting - Belgian Pilsner GR340 BestMalz - Pilsen GR414 Admiral Maltings - Admiral Pils GR710
Pilsner is the lightest LME we sell and our most recommended liquid extract for brewing lagers
A reliable base malt extract for brewing German Lagers, Czech Pilsners, and Belgian style beers
Can be used as 100% of your fermentable sugar in extract brewing
Add for color correction, boost gravity, or improve head retention in all grain brewing
Made from Pilsner style 2-row malt with added Carapils for body this extract is absolutely perfect as the base for any lager, especially German lagers and Czech Pilsners. Our Pilsner Malt Extract is also a our first choice for Belgian style beers. This is the most fermentable malt extract we sell so you if you are looking for dry beer with a crisp finish and less residual maltiness this is your best choice. This also the lightest malt extract we sell as you can see in the photo.
Pilsner malt extract is the most fragile malt extract because aging and exposure to high temperature will darken it and change the flavor. Packaged in oxygen barrier foil bags that keep the extract from oxidizing. Does fresh extract make a difference ...decide for yourself!
We recommend customers to store their extract in the refrigerator if they do not plan on using it within 8 weeks.
Pilsner Zero Malt can be used as up to 100% of your grain bill for any style of beer from traditional pilsners to modern IPAs Made from 2-row null-LOX spring barley with zero Lipoxygenase activity which improves flavor stability and extends shelf life of finished beer Malt flavor is very close to traditional pilsner malt and usually described as malty, slightly nutty and sweet Viking Malt is one of the largest premium malting companies in the world and the main malt supplier to the famous Carlsberg brewery Color Specification: 1.7–2.2°L Viking Pilsner Zero Malt is made from 2-row null-LOX spring barley. As a special feature in null-LOX varieties is that Lipoxygenase activity is zero, affecting positively on flavor stability of beer. Steeping and germination conditions are chosen to promote even germination and homogenous modification. The final air-on temperature in kilning is typically 80–85°C. Pilsner malt flavor is very close to traditional pilsner malt and usually described as malty, slightly nutty and sweet. Great malt for all malt beers but there is enough activity and character for base malt use in many brewing applications. Viking Malt is one of the largest malting companies in the world and the largest roaster of specialty malts. They are the main malt supplier to the famous Carlsberg brewery. Viking is not well known in the USA because they haven't had good US distribution. Because MoreBeer! and MoreBeer! Pro is directly importing thousands of tons of malt we are stoked to offer you Northern European malt quality from one of the best malting companies in the world at lower than domestic malt pricing. Viking Malt has 6 malthouses in areas where distinctive Nordic barley are sourced: in Halmstad, Sweden; Vordingborg, Denmark; Lahti, Finland; Panevezys, Lithuania and in Sierpc and Strzegom, Poland. The advantage of northern European malt is lower protein levels, good kernel size, and less amount of pesticides used due to the cold winters. Malt Specification: Moisture % - max. 5.0 Extract fine % dm - min. 80.0 Color °L - 1.7-2.2 Protein % dm - max. 11.5 Sol. nitrogen mg/100g - max. 750 Free amino nitrogen mg/l - 130–180 Beta-glucan mg/l - max. 200 Friability % - min. 80 Diastatic power WK dm - min. 250 For more information on brewing with null-LOX malts, click here to read BYO's article "LOX-less Malts: Their impact on staling and head retention". See the Documents tab below for Product Information and Typical Analysis.
A crisp, golden pilsner with a light malt flavor and spicy hop flavor
Includes Perle and Czech Saaz hops
Estimated ABV: 4.5%
Estimated IBUs: 25-32
Makes 5 gallons of finished beer
Golden color with a light malt flavor. Bittering hops are Hallertau. The spicy hop flavor comes from the Czech Saaz and Hallertau hops that are added late in the boil. Low in fruity esters as is characteristic of this style. Added body comes from the addition of Dextrin Powder.
Makes 5 gallons
Estimated Original Gravity:1.046-50
SRM (Color Range): 4-5
IBUs: 25-32
Estimated Alcohol Percentage: 4.5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
A crisp, golden pilsner with a light malt flavor and spicy hop flavor
Includes Perle and Czech Saaz hops
Estimated ABV: 4.5%
Estimated IBUs: 25-32
Makes 5 gallons of finished beer
A crisp, golden pilsner with a light malt flavor that comes from MoreBeer! Pilsner malt extract. The spicy hop flavor comes from the Czech Saaz hops that are added late in the boil. Low in fruity esters as is characteristic of this style. Added body comes from the addition of Dextrin Powder.
Makes 5 gallons
Estimated Original Gravity:1.046-50
SRM (Color Range): 4-5
IBUs: 25-32
Estimated Alcohol Percentage:4.5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
A great price on a cleaned, de-labelled and sanitized used pin lock keg. These kegs are pressure tested, so they are guaranteed to hold pressure when they arrive to you. You can purchase the rebuild kit and replace the gaskets yourself (very easy job) and save some money. To totally rebuild the keg you should also consider a new relief valve and poppets (part number listed below). Kegs are sold "as is" and may have cosmetic defects.
The body connnects on a keg are the metal posts where the quick disconnects attach too. They should be removed for cleaning and sanitizing before each use. Kegs can come with either 11/16" body connects or 7/8" body connects. We sell deep sockets for the removal of either one.
Kegs are approximately 9" Diam. x 22.25" Height. 25.25" Height with fittings. Measurements may vary slightly.
A good brewer knows the importance of having the right tool for the job. They also know the importance of being able to disassemble their kegs for cleaning and rebuilding. This handy socket is a must-have if you own pin lock style kegs, so that you can easily remove gas and beverage body connects. 3/8" drive.
Our Ballast Point Sculpin® IPA clone recipe kit with a pineapple twist. Add the flavoring at packaging and enjoy this tropical IPA
Bittered with Warrior® hops and finished with a beautiful blend of Cascade, Simcoe®, and Chinook late additions
Estimated ABV: 7%
Estimated IBUs: 62-69
Makes 5 gallons of finished beer
This is our normal Ugly Fish IPA that you know and love but with pineapple flavoring included. Add the flavoring just prior to bottling or kegging and you'll have a great tropical IPA to enjoy.
Contrary to its name, Ugly Fish IPA is actually one of the most beautiful beers we have to offer! Designed as a clone of the highly sought-after Ballast Point Sculpin® IPA, the Ugly Fish IPA is a hop masterpiece. This beer starts with a very clean bitterness from Warrior® hops, and finishes with a beautiful blend of Cascade, Simcoe®, and Chinook late additions. With almost 10 ounces of hops, the Ugly Fish IPA is definitely a hop forward beer, but does have a solid malt profile that stands up to those hops and helps to keep it reasonably balanced.
If you're looking to treat your taste buds to a beer that we think has been hopped perfectly, we highly recommend the Ugly Fish IPA!
Makes 5 gallons
Estimated Original Gravity: 1.067-72
SRM (Color Range): 6-8
IBUs: 62-69
Estimated Alcohol Percentage: 7%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Simcoe® and Warrior® are registered trademarks owned by Yakima Chief Hops, LLC.
Our Ballast Point Sculpin® IPA clone recipe kit with a pineapple twist. Add the flavoring at packaging and enjoy this tropical IPA
Bittered with Warrior® hops and finished with a beautiful blend of Cascade, Simcoe®, and Chinook late additions
Estimated ABV: 7%
Estimated IBUs: 62-69
Makes 5 gallons of finished beer
This is our normal Ugly Fish IPA that you know and love but with pineapple flavoring included. Add the flavoring just prior to bottling or kegging and you'll have a great tropical IPA to enjoy.
Contrary to its name, Ugly Fish IPA is actually one of the most beautiful beers we have to offer! Designed as a clone of the highly sought-after Ballast Point Sculpin® IPA, the Ugly Fish IPA is a hop masterpiece. This beer starts with a very clean bitterness from Warrior® hops, and finishes with a beautiful blend of Cascade, Simcoe®, and Chinook late additions. With almost 10 ounces of hops, the Ugly Fish IPA is definitely a hop forward beer, but does have a solid malt profile that stands up to those hops and helps to keep it reasonably balanced.
If you're looking to treat your taste buds to a beer that we think has been hopped perfectly, we highly recommend the Ugly Fish IPA!
Makes 5 gallons
Estimated Original Gravity: 1.067-72
SRM (Color Range): 6-8
IBUs: 62-69
Estimated Alcohol Percentage: 7%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Simcoe® and Warrior® are registered trademarks owned by Yakima Chief Hops, LLC.
Centered around the incredibly fruity BRU-1™ hops, a varietal that is absolutely bursting with the sweet, fruity aroma of pineapple
Includes 100% BRU-1™ hops from boil, to whirlpool, to dry hopping
Estimated ABV: 6.4%
Estimated IBUs: 34
Makes 5 gallons of finished beer
A relaxing vacation is only a pint glass away when you have this Tropical IPA on hand. After the SMaSH-ing success of our Mai Tai PA clone kit, Flamingos & Fronds, we decided to keep the island vibes going with a similar recipe featuring a new hop. Pineapples & Palms is centered around the incredibly fruity BRU-1™ hops, a varietal that is absolutely bursting with the sweet, fruity aroma of pineapple. Used for bittering, aroma, and dry hopping, BRU-1™ is an ideal choice for single hop beers. With no specialty malts in the mix, your taste buds will cut right to the headliner hop. In addition to the unmistakable pineapple character, you'll pick up notes of pear, apple, and a hint of fresh cut grass. You've earned a break from life's unrelenting hustle and bustle, if only for as long as there's beer left in your glass.
Makes 5 gallons
Estimated Original Gravity: 1.058-63
SRM (Color Range): 4-5
IBUs: 34
Estimated Alcohol Percentage: 6.4%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
BRU-1™ is a registered trademark owned by Yakima Chief Hops, LLC.
Centered around the incredibly fruity BRU-1™ hops, a varietal that is absolutely bursting with the sweet, fruity aroma of pineapple
Includes 100% BRU-1™ hops from boil, to whirlpool, to dry hopping
Estimated ABV: 6.4%
Estimated IBUs: 34
Makes 5 gallons of finished beer
A relaxing vacation is only a pint glass away when you have this Tropical IPA on hand. After the SMaSH-ing success of our Mai Tai PA clone kit, Flamingos & Fronds, we decided to keep the island vibes going with a similar recipe featuring a new hop. Pineapples & Palms is centered around the incredibly fruity BRU-1™ hops, a varietal that is absolutely bursting with the sweet, fruity aroma of pineapple. Used for bittering, aroma, and dry hopping, BRU-1™ is an ideal choice for single hop beers. With no specialty malts in the mix, your taste buds will cut right to the headliner hop. In addition to the unmistakable pineapple character, you'll pick up notes of pear, apple, and a hint of fresh cut grass. You've earned a break from life's unrelenting hustle and bustle, if only for as long as there's beer left in your glass.
Makes 5 gallons
Estimated Original Gravity: 1.058-63
SRM (Color Range): 4-5
IBUs: 34
Estimated Alcohol Percentage: 6.4%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
BRU-1™ is a registered trademark owned by Yakima Chief Hops, LLC.
G is recommended for neutral alcohol applications
Well-suited for use in simultaneous saccharification fermentations of starch substrates from grain
Performs well when pitched directly in the fermenter
Pinnacle Distillers Yeast (G) is an active dry yeast well-suited for use in simultaneous saccharification fermentations of starch substrates from grain. It has a high tolerance to liberated glucose. A relatively simple, straight-forward strain for neutral spirits. Commonly used for vodka or gin but could be used to bourbon as well.
Has a high cell count (>20 x 10⁹ cells/g)
Rehydrates well in direct pitch applications
Has high ethanol and temperature tolerance
Has organic acid tolerance
Can be used in conjunction with glucoamylase and alpha amylase enzyme systems
Application:
This yeast product has optimal performance within a pH range of 4.0 to 5.0 but can ferment well in the range of 3.5 to 6.0. Optimal fermentation temperature is dependent on other stresses present (i.e. organic acid, ethanol and pH) but generally ferments well in the range of 92-98°F (33-37°C). Under various process conditions, this yeast can produce high ethanol up to and beyond 16% w/v.
Directions for Use:
Yeast can be added directly to a fermenter at a dose rate of between 1.67-4.17 lbs per 1,000 gallons of wort (0.2-0.5 kg per 1,000L of wort).
Storage:
Store in a cool, dry place. Product should be used within two years of its production date for best performance. Packages which have lost their vacuum seal should not be used. Opened packages can be stored cool and used within 3-4 days.
Regulatory:
All yeast conforms to current local regulations.
Pinnacle Distillers Yeast began its life more than 30 years ago within the Scotch whisky sector. Over time, their yeast has become a well-established essential ingredient in the making of some of the finest award-winning malt and grain whiskies we are drinking today – not only in Scotland but around the world. In response to the growth of global spirits using many different substrates and a variety of multiple-sized, challenging processes, the family of Pinnacle Distillers Yeast has grown and is still increasing to meet future market demands.
M is recommended for malt-based fermentations for the production of whisky
Rapidly consumes maltose and produces a flavorful spirit
Performs well when pitched directly in the fermenter
Pinnacle Distillers Yeast (M) is an active dry yeast well-suited for malt-based fermentations. It rapidly consumes maltose and produces a flavorful spirit. This traditional M-type strain has been around for nearly three decades and is typically used for traditional Scotch style spirits.
Has a high cell count (>1 x 10¹⁰ cells/g)
Rehydrates well in direct pitch applications
Is noted for its resulting spirit having high organoleptic qualities
Application:
This yeast product can be applied in a variety of malt mashes. Pinnacle Distillers Yeast (M) can withstand a wide range of starting fermentation temperatures with an optimum range of 82-90°F (28-32°C). Yeast can be either pitched directly to the attemperated mash or rehydrated.
Directions for Use:
Yeast can be added directly to a fermenter at a dose rate of between 4.17-7.5 lbs per 1,000 gallons of wort (0.5-0.9 kg per 1,000L of wort).
Storage:
Store in a cool, dry place. Product should be used within three years of its production date for best performance. Packages which have lost their vacuum seal should not be used. Opened packages can be stored cool and used within 3-4 days.
Regulatory:
All yeast conforms to current local regulations.
Pinnacle Distillers Yeast began its life more than 30 years ago within the Scotch whisky sector. Over time, their yeast has become a well-established essential ingredient in the making of some of the finest award-winning malt and grain whiskies we are drinking today – not only in Scotland but around the world. In response to the growth of global spirits using many different substrates and a variety of multiple-sized, challenging processes, the family of Pinnacle Distillers Yeast has grown and is still increasing to meet future market demands.
S is recommended for neutral alcohol applications
Well-suited for batch and continuous fermentations of molasses and pure sugars
Performs well when pitched directly in the fermenter
Pinnacle Distillers Yeast (S) is an active dry yeast well-suited for use in batch and continuous fermentations of molasses and pure sugars. It has a high tolerance to early residual sugars. This workhorse strain has a neutral profile and ferments very quickly. In addition to rum, it works quite well for hard seltzer.
Has a high cell count (>1 x 10¹⁰ cells/g)
Rehydrates well in direct pitch applications
Has high ethanol and temperature tolerance
Has organic acid tolerance
Can be used in conjunction with nutritional and vitamin supplementations
Application:
This yeast product has optimal performance within a pH range of 4.0 to 5.0 but can ferment well in the range of 3.5 to 6.0. Optimal fermentation temperature is dependent on other stresses present (i.e. organic acid, ethanol and pH) but generally ferments well in the range of 92-98°F (33-37°C). Under various process conditions, this yeast can produce high ethanol titres under a broad range of applications and substrate type.
Directions for Use:
Yeast can be added directly to a fermenter at a dose rate of between 1.67-4.17 lbs per 1,000 gallons of wort (0.2-0.5 kg per 1,000L of wort).
Storage:
Store in a cool, dry place. Product should be used within three years of its production date for best performance. Packages which have lost their vacuum seal should not be used. Opened packages can be stored cool and used within 3-4 days.
Regulatory:
All yeast conforms to current local regulations.
Pinnacle Distillers Yeast began its life more than 30 years ago within the Scotch whisky sector. Over time, their yeast has become a well-established essential ingredient in the making of some of the finest award-winning malt and grain whiskies we are drinking today – not only in Scotland but around the world. In response to the growth of global spirits using many different substrates and a variety of multiple-sized, challenging processes, the family of Pinnacle Distillers Yeast has grown and is still increasing to meet future market demands.
On The House winemaking kits are the perfect introduction to creating your very own wine at home. Each kit contains all the ingredients you’ll need with easy-to-follow instructions that will guide you through the whole process from start to finish. Designed with beginners in mind so that anyone can make something they’ll be proud to share with friends and family. Simple and straightforward, On The House offers a full range of red, white, and blush style wines. You’ll be well on your way to sipping your very own house wine in only 4 weeks!
Pinot Grigio Style is a light-bodied wine with refreshing flavors of green apple and citrus. A dry white wine with no oak character and an alcohol level of 11.5% by volume.
Pinot Grigio Style
Green apple, citrus
Sweetness: Dry
Oak: None
Body: Light
ABV: 11.5%
Kit Volume: 6 L
Approximate Yield: 23 L
Ready to bottle in 4 weeks
Tart green apple with crisp citrus and honey flavors
Light-bodied and dry, 11.2% ABV
Pair with grilled seafood or Asian strir fry
Each kit yields 6 gallons (2 cases) of finished wine in approximately 4 weeks
A typical dry Pinot Grigio style, this wine boasts aromas of tart green apple with crisp citrus and honey flavors.
Food Pairings
Pair with grilled seafood or Asian strir fry.
Pinot Grigio
Sweetness: Dry
Oak: Unoaked
Body: Light
ABV: 11.2%
Kit Volume: 6.3L
Approximate Yield: 23L
Ready to bottle in 4 Weeks
On The House winemaking kits are the perfect introduction to creating your very own wine at home. Each kit contains all the ingredients you’ll need with easy-to-follow instructions that will guide you through the whole process from start to finish. Designed with beginners in mind so that anyone can make something they’ll be proud to share with friends and family. Simple and straightforward, On The House offers a full range of red, white, and blush style wines. You’ll be well on your way to sipping your very own house wine in only 4 weeks!
Pinot Noir Style is a light-medium bodied wine that combines exquisite red fruit flavors and earthy notes. This dry red wine has a subtle oak presence and an alcohol level of 11.5% by volume.
Pinot Noir Style
Red fruit, earthy
Sweetness: Dry
Oak: Light
Body: Light-Medium
ABV: 11.5%
Kit Volume: 6 L
Approximate Yield: 23 L
Ready to bottle in 4 weeks
A dry and light-bodied wine with crisp acidity and very little tannin
Medium-bodied and dry, 11.8% ABV
Serve with pasta and roasted vegetables or grilled eggplant
Each kit yields 6 gallons (2 cases) of finished wine in approximately 4 weeks
A dry and light-bodied wine with crisp acidity and very little tannin; plenty of fruit flavor with some cherry and red berry notes.
Food Pairings
Serve with pasta and roasted vegetables or grilled eggplant.
Pinot Noir
Sweetness: Dry
Oak: Light
Body: Medium
ABV: 11.8%
Kit Volume: 6.3L
Approximate Yield: 23L
Ready to bottle in 4 Weeks
If you're installing a stainless thermowell or Temp Twister Cooling Coil on your FermZilla, this pipe cutter will help make the process painless.
This easy to use pipe cutter makes cutting copper, stainless steel, or aluminum tubing an absolute breeze. Easy to use and compact so it can get into tight corners and gives you a clean pipe cut. Simply hand tighten the pipe cutter onto the mark where you want to cut the pipe. Rotate the cutter around the pipe a couple of times to create a groove all around the pipe, and then each time you rotate the cutter, tighten the blade a little. Each rotation will cut a little deeper into the pipe and the cut will be straight.
Suitable for 1/8"-3/16" pipe (3-22 mm)
Cuts copper, brass, aluminum, steel, and stainless steel
Heavy-duty one-piece slide
Polished roller for easy rotation
Hardened steel cutting blade
Kegland Part Number: KL14557
Used to measure small amounts of fluid. Used in winemaking to measure the correct amount of wine for a residual sugar test using a clinitest tablet.
This glass pipet is designed as To-Deliver, not To-Contain, meaning that you do not want to blow out the last little bit in the tip after the sample drains out or you will deliver more than your measured amount.
Class-A, Reusable Glass Serological Pipet; 5 mL (To Deliver)
This glass pipet is graduated to the tip and features permanent amber-colored markings enameled onto the glass.
Capacity: 5.0 mL
Tolerance: 0.02 mL
Graduation Interval: 0.01 mL
Approximate O.D. X Height: 8 X 365 mm
This 50mL volumetric pipette is the perfect accessory to use with our MT693 Automatic Titrator for Free & Total SO2. The titrator requires a 50mL sample and this Class A glass pipette allows you to deliver consistent, correct samples with precision and confidence. Accurate to within 0.05mL.
Safety Bulb pipette filler for use with solutions that should not be mouth pipetted. In general, it is best to use the filler with anything that is not a wine sample.To Use: Squeeze filler and place on top of the pipette. Place the pipette in the solution, allowing the bulb to re-expand, drawing liquid into the pipette. Draw liquid up past the point in the pipette that you would like it filled to. Now, being careful not to draw up excess liquid or squeeze out what you have in the pipette, quickly remove the squeeze bulb and place your index finger tightly over the top of the pipette. Now by gently lifting your finger, you can allow the liquid to run out to the level that you're looking for.**Tip:** Be careful not to draw your liquid up into the filler. Many chemicals that are used around the lab can degrade the filler and cause poor sealing, making the filler harder to use. A great way to get a feel for the tool is to practice for a little while with some water, until you can easily remove the filler and seal the pipette with your finger.
Dough proofing box perfectly sized to accommodate individual pizza dough portions, making it easy to manage and transfer dough. Box only. See here for the box lid or the complete box & lid. Dimensions: 17.5" Long x 12.5" Wide x 3.25" Deep
Comfortably holds individual dough balls for easy management Tight-fitting lid retains moisture and prevents drying Stackable design maximizes refrigerator space Tired of messy countertops and awkwardly shaped containers when proofing your pizza dough? This durable and thoughtfully designed Pizza Dough Box with Lid is the perfect solution for any home pizza enthusiast. Sized for convenience, this box comfortably holds individual dough balls for your favorite pizza recipes. The generous depth allows for proper rising without the dough overflowing. The box body and box lid are also available for purchase separately. Features: Optimal Size: Perfectly sized to accommodate individual pizza dough portions, making it easy to manage and transfer dough. Secure Lid: The tight-fitting lid creates the ideal environment for proofing, retaining moisture and preventing the dough from drying out or forming an unwanted skin. Stackable Design: Maximize your refrigerator space! Designed to neatly and securely stack multiple boxes, keeping your fridge organized and your dough separated. Versatile Use: Not just for pizza dough! This box is also great for storing other types of dough, like bread rolls or focaccia. Dimensions: 17.5" Long x 12.5" Wide x 3.25" Deep KegLand Part Number: KL41645
A blend of Italian and European wheat varieties hand-selected for their high protein and gluten content to yield pizza crust with a chewy texture and hearty bite. Caputo 00 Americana is recommended for making thin crust New York style pizza. Not recommended for use with the HIZO Pizza Oven which is designed to get very hot (+900°F). We recommend using Caputo 00 Blue which is perfect for making Neapolitan style pizza dough that won't burn as quickly at high heat. Regardless of what style pizza you're making, we recommend using Fine Rice Flour as "pizza slide" to prevent your pizza from sticking to your pizza stone or other baking surface. Example image is of bulk sack. Updated images coming soon.
Made from top-quality soft wheat flour that is additive free and all-natural, Caputo 00 Blue has an extremely fine texture that produces a very soft, flavorful thin crust. Recommended for making traditional Neapolitan style pizza. The HIZO G14 Pizza Oven is perfect for making Neapolitan style pizza due to its high heat capacity. Regardless of what style pizza you're making, we recommend using Fine Rice Flour as "pizza slide" to prevent your pizza from sticking to your pizza stone or other baking surface. Example image is of bulk sack. Updated images coming soon.
High-gluten flour carefully milled from hard red spring wheat and has 14.2% protein. Sir Lancelot flour produces an extra-chewy pizza crust recommended for making the thicker style Detroit style pizzas. The flour can also be used to make more traditional thinner style crusts. When the dough is prepared for making traditional Detroit Pizzas the heat should be turned down when using the HIZO Pizza Oven (which can get up to 900°F). For traditional thinner crust pizzas in the Hizo, we recommend using Caputo 00 Blue which is perfect for making Neapolitan style pizza dough that won't burn as quickly at high heat. Regardless of what style pizza you're making, we recommend using Fine Rice Flour as "pizza slide" to prevent your pizza from sticking to your pizza stone or other baking surface. Example image is of bulk sack. Updated images coming soon.
This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Pizza Port Brewing Company
Malt-forward and hoppy, a delicious example of Brown Ale
Includes Magnum and Cascade hops
Estimated ABV: 6.3%
Estimated IBUs: 25-29
Makes 5 gallons of finished beer
Pizza Port in Solana Beach was the first of three brewpubs to open under the Pizza Port name. Brandon Edwards, who used to be an employee of Morebeer, has been brewing in Solana Beach for a number of months, and with Pizza Port for a few years. Brandon made this recipe to celebrate the one year anniversary of the Toronado beer bar opening in San Diego. This brown ale is pretty malty and hoppy, but we wouldn't expect anything less from Brandon!
Makes 5 gallons
Estimated Original Gravity: 1.062-70
SRM (Color Range): 30
IBUs: 25-29
Estimated Alcohol Percentage: 6.3%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Pizza Port Brewing Company
Malt-forward and hoppy, a delicious example of Brown Ale
Includes Magnum and Cascade hops
Estimated ABV: 6.3%
Estimated IBUs: 25-29
Makes 5 gallons of finished beer
Pizza Port in Solana Beach was the first of three brewpubs to open under the Pizza Port name. Brandon Edwards, who used to be an employee of Morebeer, has been brewing in Solana Beach for a number of months, and with Pizza Port for a few years. Brandon made this recipe to celebrate the one year anniversary of the Toronado beer bar opening in San Diego. This brown ale is pretty malty and hoppy, but we wouldn't expect anything less from Brandon!
Makes 5 gallons
Estimated Original Gravity: 1.062-70
SRM (Color Range): 30
IBUs: 25-29
Estimated Alcohol Percentage: 6.3%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Pizza Port Brewing Company
Great red color with a solid malt sweetness matched with a firm hop backbone
Includes Magnum, Centennial, and Cascade hops
Estimated ABV: 5.8%
Estimated IBUs: 55-60
Makes 5 gallons of finished beer
Shark Bite Red is the flagship beer of Pizza Port, and has been brewed more times than any of their standards. Great red color with a solid malt sweetness matched with a firm hop backbone, all for under 6% ABV. We recommend White Labs California Ale WLP001.
Makes 5 gallons
Estimated Original Gravity: 1.057-61
SRM (Color Range): 21
IBUs: 55-60
Estimated Alcohol Percentage: 5.8%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Pizza Port Brewing Company
Great red color with a solid malt sweetness matched with a firm hop backbone
Includes Magnum, Centennial, and Cascade hops
Estimated ABV: 5.8%
Estimated IBUs: 55-60
Makes 5 gallons of finished beer
Shark Bite Red is the flagship beer of Pizza Port, and has been brewed more times than any of their standards. Great red color with a solid malt sweetness matched with a firm hop backbone, all for under 6% ABV. We recommend White Labs California Ale WLP001.
Makes 5 gallons
Estimated Original Gravity: 1.057-61
SRM (Color Range): 21
IBUs: 55-60
Estimated Alcohol Percentage: 5.8%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
