Plastic funnel screen for use with 21 cm, 25 cm, and 25 cm Anti-splash plastic funnels. Fits our BE489, BE493, and BE498 Snaps into the specially designed groove in the base of the funnels to filter out solids and small particles.
Fits Ferrari brand funnels. Not compatible with Vintage Shop brand funnels.
Plastic funnel screen for use with 30 cm and 35 cm plastic funnels. Snaps into the specially designed groove in the base of the funnels to filter out solids and small particles.
Fits Ferrari brand funnels. Not compatible with Vintage Shop brand funnels.
Plastic funnel screen for use with 40 cm plastic funnels (BE479). Snaps into the specially designed groove in the base of the funnels to filter out solids and small particles. Fits Ferrari brand funnels. Not compatible with Vintage Shop brand funnels.
There are some tools you simply can't do without. Once you have discovered the “flexibility” of this funnel and all of the places it can be used, you will never go without one again!
This 9 inch Funnel with a flexible output hose can be used when transferring liquid into a carboy, adjusting to where you need it to fit into the carboy neck. The flexible tubing also means you can use it anywhere you need to maneuver tight quarters or strange configurations.
G-Type keg coupler for Anchor Steam and some other European kegs
Pull-to-engage ergo lever handle
Includes 3/8" OD barb for gas inlet
Bass G style keg tap, also known as, keg coupler, coupling, or adapter. Fits Anchor Brewing kegs.
Will also fit:
Abbot Ale
Anchor Liberty Ale
Anchor Porter
Anchor Steam
Bass Pale Ale
Blackthorne Cider
Caffrey's
Fuller's ESB
Fuller's London Pride
Grolsch
Old Speckeled Hen
Rouge
Scottish Tennents
Sir Perry William's
Watney's
Young's
Young's Chocolate Stout
Young's Oatmeal Stout
Young's Ram Rod Bitter
Young's Special London Ale
A classic American Pale Ale recipe featuring Galaxy hops, a beloved Australian hop with aromas of passion fruit and citrus
Includes Magnum and Galaxy hops
Estimated ABV: 6.3%
Estimated IBUs: 55-60
Makes 5 gallons of finished beer
Behold, our extra pale kit featuring hops from the land down under...Australia! This over the top pale is a hop bomb! A classic American Pale Ale with deep aromas of passion fruit and citrus.
Makes 5 gallons
Estimated Original Gravity: 1.065-69
SRM (Color Range): 10-15
IBUs: 55-60
Estimated Alcohol Percentage: 6.0-6.5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
A classic American Pale Ale recipe featuring Galaxy hops, a beloved Australian hop with aromas of passion fruit and citrus
Includes Magnum and Galaxy hops
Estimated ABV: 6.3%
Estimated IBUs: 55-60
Makes 5 gallons of finished beer
Behold, our extra pale kit featuring hops from the land down under...Australia! This over the top pale is a hop bomb! A classic American Pale Ale with deep aromas of passion fruit and citrus.
Makes 5 gallons
Estimated Original Gravity: 1.065-69
SRM (Color Range): 10-15
IBUs: 55-60
Estimated Alcohol Percentage: 6.0-6.5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
One the most popular hops in craft brewing today, Galaxy hops are adored for their huge oil content and pungent citrus and passionfruit flavors. This single hop variety accounts for the majority of hop yield coming from Australia, and is still one of the more difficult hops to get your hands on. It's so popular that we have to contract for it years in advance, so be sure to shore up your supply when it's in stock! This tantalizing dual purpose hop can be used up and down the hopping schedule and is an absolute stunner when used late in the boil, whirlpool, or dry hopping. Expect big aromas of peach with hints of pineapple and tropical fruit. Use liberally in all hop-forward styles, including IPAs, Pale Ales, Hazys, hoppy lagers, or any beer where you want to add a little tropical twist.
Hop Statistics:
Alpha Acids: 13.5 – 14.8%
Beta Acids: 5.8 – 6.0%
Alpha-Beta Ratio: 2.25 – 2.55
Cohumulone: (% of alpha acids): 35%
Total Oils in mls per 100 grams dried: 2.4 – 2.7
Similar Hop Varieties: Citra®
Galaxy® is a registered trademark owned by Hop Products Australia.
Citra® is a registered trademark owned by Yakima Chief Hops, LLC.
Galena is a classic American hop that was been used in many quintessential craft beers. Galena features great bittering with neutral character. Medium, pleasant hoppiness. Strong, somewhat floral, pleasant aroma. We use this hop quite a bit in an assortment of styles.
MoreBeer! & Galena - a little fun history
Galena was the original bittering hop we used in most of our kits thought the 90's. We later switched to using Magnum but many of our original customers still really like this hop. Regan Dillon, MoreBeer!'s second customer and later partner, was a big champion of this variety through the 1980's and 1990's. Regan still loves this hop so if you happen to run into Regan at our Concord store or at a festival you can become instant friends by saying "Man, I don't know why Galena isn't used more!"
Typical usage: High Alpha hop
Aroma: Mild citrus aroma
Alpha acids: 13.0-15.0%
Beta acids: 7.5-8.5%
Cohumulone: 34-39%
Total Oil: 1.3-2.1 ml/100g
Myrcene: 40-50%
Humulene: 11-17%
Country of origin: USA
The Heat Shield is a essential safety and protection accessory for your Modular Utility Cabinet system, specifically designed to safeguard the cabinet’s side panel and finish when using a propane burner or other high-heat source on the Folding Side Stand.This rugged, stainless steel shield mounts directly to the cabinet’s side (adjacent to the Folding Side Stand) and acts as a durable thermal barrier, reflecting and deflecting radiant heat away from the powder-coated body and preventing scorching, discoloration, or damage during intense brewing or outdoor cooking sessions.
Perfect for homebrewers running propane burners on the side stand for step mashing, boiling, or high-heat steps, outdoor cooks using portable burners for large pots, griddles, or direct-flame prep, or anyone prioritizing long-term cabinet durability and a pristine appearance in high-heat scenarios.
Important Note: The Heat Shield is specifically for use with the Folding Side Stand configuration when a burner is involved. It does not provide full enclosure or replace proper burner safety practices (maintain clearance, use on stable surfaces, never leave unattended).
Specifications:
Premium 304 stainless steel construction — Matches your cabinet’s top and other stainless accessories; highly heat-resistant, corrosion-proof, and easy to wipe clean after use.
Targeted heat deflection — Engineered to protect the cabinet side when a burner (such as the Blichmann HellFire™ or similar portable propane unit) is placed on the deployed Folding Side Stand—keeps temperatures safe and preserves the black powder-coat finish.
Simple bolt-on installation — Attaches securely using included hardware and pre-drilled mounting points on the cabinet—no drilling or modifications required. Quick to install or remove as needed.
Compact & unobtrusive — Low-profile design sits flush against the cabinet side, maintaining a clean, professional look even when the Folding Side Stand is folded down.
Recommended pairing — Essential whenever you’re using a burner on the Folding Side Stand (e.g., for direct-heat brewing, chili simmering, or outdoor cooking). Not needed for electric systems like the Anvil Foundry™.
Manifolds are a great way to have one CO2 tank supply multiple kegs. This manifold is made from aluminum, brass, and stainless. It also works up to 100 psi and includes 1/4 in ball valves with built in check valves. Another ball valve can be added to the end of the manifold for an additional gas line. Multiple manifolds can be linked up with a 1/4" nipple (D1820B). Features: 1/4" BSP ball valves 1/4" barbs Rated up to 100 psi Screw holes for easy mounting Optional additional port on the end SKU Overall Length D1802 5-1/2 in. D1807 7-3/8 in. D1811 9-5/8 in. D1813 11-1/2 in. D1816 13-1/2 in. The above measurements are from the tip of the brass barb to the plug on the opposite end. Each manifold measures approximately 3.5" from the mounting holes to the tip of the valve. Kegland Part number: KL02554
Manifolds allow you to have one CO2 tank with multiple lines. Each line can be turned off individually without affecting flow to other kegs. Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs. The barbs are all 5/16", standard for gas line in the beer industry.
Great for customizing and expanding your modular gas line manifold!
This Add On Assembly for a gas manifold is easy to add to your existing manifold setup. Gives you the ability to expand your setup without having to buy a new manifold. Includes a shut off check/ball valve, one tee and a connecting nipple.
Threads into black pipe at the bottom of your gas system, for connecting to the 3/8'' female flare fitting on the end of your propane regulator hose. Look at the regulator picture at left. Made from brass.
Use The Vintage Shop 2-in-1 Bottle Washer as an oxygen purging system with this Gas Purging Adapter Features an in-line check valve to control gas flow without needing the tank nearby Convert your bottle rinsing base (CE970) into an inert gas system for purging your bottles. If you own the bottle rinsing and purging base, this Gas Purging Adaptor is the piece of gear that will take the base from rinse to purge. For use with standard 1/4" or 5/16" gas line. Features an in-line check valve to control gas flow without needing the tank nearby. Includes our H550 Gas Line Quick Disconnect Set for installation into an existing gas system.
You'll love the convenience of using this complete gas tubing assembly for draft beer dispensing.
This Gas Tubing Assembly includes a ball lock gas-in quick disconnect fitting, 5 feet of 5/16" gas tubing, and two hose clamps. It's more convenient than having to hunt down all of the individual parts yourself. You'll find several places you can use this assembly in your homebrewing configuration.
For connecting your Co2 gas tank to your homebrew style Pin Lock Keg. Includes pin lock gas in quick disconnect, 3 feet of gas line and two hose clamps.
Gasket/Seal for the back end of the fill spouts in our WE602 and WE610 3 and 5 Spout Siphon Fillers. This is the gasket which seals the fill spout against the inner wall of the filler's reservoir when a bottle is not on the spout.
A replacement gasket for the lids of Half Barrel Chronicals.
Features:
Brewer's Grade Silicone
Replacement part for Brew Buckets and Chronical Series Fermenters
The gaskets on the body connects that the ball or pin lock fittings slide over. 7/16" ID with a 3/32" cross section. Made of FDA BUNA-N rubber.
We also use this as a replacement for the smaller compression ring in our 1/2" Compression fittings so that you can create a snug fit in a Sanke keg conversion kit without permanently compressing a ring on the pick up tube.
Protects your regulator from damage if the tank is knocked over
Made from durable 304 stainless steel for longevity
Designed to fit KOMOS Premium Regulator (D1077) perfectly
Affordable "cheap insurance" against costly regulator replacement
Includes all necessary mounting hardware
This gauge cage is made specifically for the KOMOS Premium CO2 Regulator (D1077) and will fit like a glove. Protect your regulator at an affordable price and avoid having to purchase a new one if bumped into or knocked over.
Please Note: Regulator not included. Shown for demo only.
Please Note: This gauge cage is only compatible with the D1077 model KOMOS regulator. It is not compatible with models D1170, D1171, D1175.
Protects your regulator from damage if the tank is knocked over
Made from durable 304 stainless steel with black resin coating
Designed to fit KOMOS Premium Regulators (D1077 & D1175) perfectly
Affordable "cheap insurance" against costly regulator replacement
Includes all necessary mounting hardware
This gauge cage is made specifically for the KOMOS Dual Gauge Regulators (D1077 & D1175) and will fit like a glove. Protect your regulator at an affordable price and avoid having to purchase a new one if bumped into or knocked over.
Please Note: Regulator not included. Shown for demo only.
Please Note: This gauge cage is only compatible with the D1077 and D1175 Premium model KOMOS regulators. It is not compatible with Universal model KOMOS regulators D1170 and D1171.
Protect your regulator from damage in the event your tank gets knocked over. A Gauge Cage is cheap insurance that can help save you a costly regulator replacement.
Mounting bolt and washer included.
CO2 and Nitrogen tanks, especially the 5lb size most brewers use, are notoriously wobbly and easy to knock over once the regulator is mounted on them. This handy Gauge Cage helps protect the gauges themselves, as well as the fragile points where they thread into the regulator body, from damage in case of a fall.
Specifically sized to fit our D1060 and D1070 Taprite brand ragulators, these cages may not fit some budget regulators manufactured overseas.
A heat soluble, commercial quallity extra no. 1 grade, powered Gelaitin. This is much higher quality Gelatin than you will find in most beer/winemaking shops. It is composed of high molecular weight mass proteins that carry a big positive charge. Prepare by mixing in warm water and then adding during a transfer or pump-over. The solution must be maintained at 95-104F (35-40C) when used. See below for different dosage rates for beer and wine.
For Beer
Use 1/2 tsp for five gallons of beer. Dissolve gelatin into 1/4-1/2 cup of hot water to dissolve and add to beer. Wait a few days and rack off.
A rough approximate of weight is 1 tsp = 1.2 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.
Often used with isinglass, bentonite, gelatins, and other organically derived fining agents to help compact the lees, Gelocolle is a liquid solution of suspended silica that is used during fining to help improve settling. Gelocolle also helps to limit the risk of over-fining when used in conjuction with other fining agents. Gelocolle can also be used to remove excess protein in both red and white wine, thereby improving their filterability. Gelocolle is completely inert and will not add any flavor or aroma to the wine.
To Use
Add Gelocolle 1 hour after the fining agent. Mix well to ensure homogenization.
Recommended Dosage:
In general, use Gelocolle at a rate of 1 mL Gelocolle per 1 g of the fining agent you are aiding. For protein removal use 5 ml Gelocolle per gallon of wine.
Note: When using Gelocolle with a gelatin fining, use 1.0 mL of Gelocolle to 1.0 mL of gelatin.
Once opened use immediately.
Best stored at 50-68 F (10-20 C). Gelocolle solidifies irreversibly when frozen.
