Made by MoreBeer! from 304 stainless steel.
This quick disconnect seals up very well without a lot of work in connecting them. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2" Barb on the ends for easy connectivity to any 1/2" tubing you may have.
The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 3/8" ID. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off.
We designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why MoreBeer! Stainless QD fittings have a near unanimous 5 star review.
Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.
To upgrade your brew system, and make your life easier, thread these QD’s on your kettle, mash-tun, pump and chiller! When used with the male QD, they seal up very well in either flow direction. They will save you time and prevent messes. Just get several silicone hoses of various lengths and put barbed male fittings on either end. Then use them wherever you need to in your system! They are so much easier to use than pushing and pulling the hoses off of barbs. It makes things interchangeable for cleaning, and provides quick installation and removal.
MoreBeer! designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why MoreBeer! Stainless QD fittings have a near unanimous 5 star review.
Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.
This will work with any of our H503 and H507 series of quick disconnects. These feature a 1/2" Female National Pipe Thread on the end for easy connectivity to almost anything. The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60 psi or less. 1/2" ID. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off.
To upgrade your brew system, and make your life easier, thread these QD’s on your kettle, mash-tun, pump and chiller! When used with the male QD, they seal up very well in either flow direction. They will save you time and prevent messes. Just get several silicone hoses of various lengths and put barbed male fittings on either end. Then use them wherever you need to in your system! They are so much easier to use than pushing and pulling the hoses off of barbs. It makes things interchangeable for cleaning, and provides quick installation and removal.
MoreBeer! designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why MoreBeer! Stainless QD fittings have a near unanimous 5 star review.
Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.
This will work with any of our H503 and H507 series of quick disconnects. These feature a 1/2" Male National Pipe Thread on the end for easy connectivity to almost anything. The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60 psi or less. 1/2" ID. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off.
Made by MoreBeer! from 304 stainless steel.
This quick disconnect seals up very well without a lot of work in connecting them. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2" Barb on the ends for easy connectivity to any 1/2" tubing you may have.
The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 3/8" ID. Open port, does not have shut-off.
We designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why MoreBeer! Stainless QD fittings have a near unanimous 5 star review.
Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.
Made by MoreBeer! from 304 stainless steel.
When used in conjunction with the female QD these quick disconnects seal up completely regardless of the liquids direction of flow, while remaining simple and easy to use. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2" Female National Pipe Thread on the ends for easy connectivity to almost anything.
The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 1/2" ID. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off.
We designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why MoreBeer! Stainless QD fittings have a near unanimous 5 star review.
Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.
Quickly and easily connect and disconnect your brew tubing from kettles, pumps and fermenters without fiddling with hose clamps or trying to muscle the tubing on and off of barbed fittings!
There’s no need to put in a lot of work connecting when using this MPT Stainless Steel Male Quick Disconnect with the female QD, as they seal-up quickly. This part works well with any of our H503 and H507 series of quick disconnects, but should only be used with other 304 stainless steel models. Features a 1/2" Male National Pipe Thread on the outer ends that offers easy connectivity to just about anything.
The quick disconnect will hold pressure for most brewing applications if you plan on moving liquids at 60psi or less. 1/2" ID. Take note this is an open port model with no shut-off.
We designed the original stainless QD's for the brewing industry over a decade ago, and have been using the same reliable manufacturer ever since. Our design has certainly been imitated but has never duplicated at the same quality level. It’s no surprise MoreBeer! Stainless QD fittings have an almost unanimous 5 star customer rating!
Made by MoreBeer! from 304 stainless steel.
Please Note: This product does NOT work with our Brass or Plastic Quick Disconnects.
Stainless scrub pads can be used for cleaning tough burn stains on the bottom of a kettle. We prefer the white pads for everyday type cleaning of stainless steel. Two per pack.
This stainless steel shuttle can be used to replace the TPV rubber NukaShuttle that comes standard in the NukaTap beer faucet. For users that prefer stainless internal mechanisms in their faucet. You will need to remove the bonnet piece at the handle, pull the handle out and then slide the shuttle piece out.
Compatible with all NukaTap faucets, including Gen 2 Flow Control.
KegLand Part Number: KL35958
A stainless steel option for the KegLand 5L and 10L American White Oak barrel. The standard spigot is spring-loaded for easy dispensing, but this stainless tap is preferable to many users.
Suitable only for 5L and 10L KegLand Oak Barrel.
Kegland Part Number: KL14397
Maximize the purity of your distillate with high density spiral prismatic packing Prismatic spiral shape designed to maximize surface area One 500g bag is suitable for filling one 10" long 2" tri-clamp extension tube Take you distillation to the next level with super high density spiral prismatic packing. The packing maximizes the purity of the collected distillate from your reflux still, ensuring the best possible product is collected. The prismatic spiral shape is designed to maximize its surface area helping to separate out fractions in your reflux, resulting in a highly pure and neutral end product. It is not recommended for use with pot stills when producing flavored spirits. Standard spiral prismatic packing is recommended for home-sized columns like the AlcoEngine series. Large size packing is recommended for 4" diameter or larger columns. Note: We recommend soaking and washing the SPP before its first use with a 50:50 mix of vinegar or citric acid and warm to hot water to remove all manufacturing oils. Sizing: The SPP is approximately 3.35mm x 3.45mm. Suitable to fill a 10” x 2” T.C. Extension Tube. One 500g bag of SPP is enough to fill approximately 500 mL (16.9 oz) of volume. The HETP (Height Equivalent to a Theoretical Plate) for this packing is approximately 30mm. That is roughly 33 theoretical plates per meter. KegLand Part Number: KL25706
A convenient bolt-together stand made from Stainless Steel to raise your tank off of the ground, allowing for easier sampling, racking, and cleaning!
Fits tanks with approximate diameter of 50 cm (19.5".)
Will raise your tank approximately 15" off the ground.
A convenient bolt-together stand made from Stainless Steel to raise your tank off of the ground, allowing for easier sampling, racking, and cleaning!
Fits tanks with approximate diameter of 80 cm (31.5".)
Will raise your tank approximately 15" off the ground.
This stainless steel steeping ball is great for making loose leaf tea or adding flavoring ingredients to your kombucha. Measures approximately 2.75" in diameter.
Tailpieces are fittings which connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with collar nut.
Tailpieces are available in a range of barb sizes to fit up to your tubing size.
304 stainless steel construction means these pieces won’t rust or harbor bacteria that can ruin the taste of your beer.
Tailpieces are fittings which connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with collar nut.
Tailpieces are available in a range of barb sizes to fit up to your tubing size.
304 stainless steel construction means these pieces won’t rust or harbor bacteria that can ruin the taste of your beer.
When you need to remove items, such as hop bags, from a pot of boiling wort, you’ll be glad you have these stainless steel tongs around!
It’s a given that when you're brewing, you're going to be surrounded by hot liquids. These extra long 16" Stainless Steel Tongs are perfect for grabbing hot things in a boil or for removing sanitized objects from sanitizing solution. They’re big enough to reach down into your kettle, but still small enough to use easily.
Weldless Thermowell from Ss Brewing Technologies. The universal design allows for easy installation on most vessels (including Speidel!). A must have upgrade for your existing Brew Bucket. It is constructed from 304 stainless steel, and approximately. 6 inches in overall length, with the inner thermowell portion being almost 4 of those inches. The thermowell fits into a 17mm punched/drilled hole.
There's never enough counterspace on brew day. The heavy-duty stainless steel work table is an excellent companion to carry water for you, and with the swivel rolling casters, it will be happy to follow you from station to station around your brewery. With a 400 lb top shelf weight capacity and 300 lb undershelf weight capacity, this humble work table is more than capable of being the Robin to your Batman.
This is the very same table featured in the BrewBuilt X2 Jacketed Conical Ultimate Chilling Package. The top shelf is the perfect size for a 7 or 14 gallon X2 Conical, and the undershelf is the perfect hangout for an IceMaster Max 2 Glycol Chiller.
The work table will not accommodate a 25 or 38 gallon X2 conical.
Specs:
Top Shelf Dimensions: 24" x 24"
Height: 34"
Top shelf Capacity: 400 lb
Undershelf Capacity: 300 lb
Tabletop made from 18-gauge, 304 stainless steel
Undershelf and legs made from galvanized steel
There's never enough counterspace on brew day. The heavy-duty stainless steel work table is an excellent companion to carry water for you, and with the swivel rolling casters, it will be happy to follow you from station to station around your brewery. With a 400 lb top shelf weight capacity and 300 lb undershelf weight capacity, this humble work table is more than capable of being the Robin to your Batman.
This is the very same table featured in the BrewBuilt X2 Jacketed Conical Ultimate Chilling Package. The top shelf is the perfect size for a 7 or 14 gallon X2 Conical, and the undershelf is the perfect hangout for an IceMaster Max 2 Glycol Chiller.
The work table will not accommodate a 25 or 38 gallon X2 conical.
Specs:
Top Shelf Dimensions: 24" x 24"
Height: 34"
Top shelf Capacity: 400 lb
Undershelf Capacity: 300 lb
Tabletop made from 18-gauge, 304 stainless steel
Undershelf and legs made from galvanized steel
Few materials are more durable or more attractive than stainless steel, which is exactly what sets this Stainless Steel Wort Chiller from MoreBeer! apart from similar chillers. This high quality stainless wort chiller includes 8 feet of vinyl tubing attached to both the in and out using a female garden hose fitting on the “in” side, as well as 25 feet of stainless steel tubing measuring 3/8 inch diameter.
Although stainless steel takes a little longer to cool your worth than comparable copper tubing, its advantage is that it won’t tarnish between uses. Stainless steel is also much more affordable than copper, which makes this an economical choice that won’t sacrifice quality or real-world effectiveness. This stainless steel wort chiller also contains a brass hose adapter for an even more attractive, high quality look and feel.
The Stainless Steel Wort Chiller 25’ x 3/8” from MoreBeer! is made entirely in the U.S.
Note: The inner bend on the coils have small indentations that are a natural result of the winding process used during manufacturing. As an upside, these do actually help turbulate the cooling water to eliminate laminar flow (helps increase the cooling capacity).
Product Specifications
25' Stainless tubing
8' Vinyl Tubing
Brass Hose Adaptor
10" diameter
8" to the top coil
15" to the bend to go over the lip of the kettle.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more inventory.
Few materials are more durable or more attractive than stainless steel, which is exactly what sets this Stainless Steel Wort Chiller from MoreBeer! apart from similar chillers. This chiller is made from 50 feet of stainless steel tubing measuring 1/2 inch diameter.
Although stainless steel takes a little longer to cool your worth than comparable copper tubing, its advantage is that it won’t tarnish between uses. Stainless steel is also much more affordable than copper, which makes this an economical choice that won’t sacrifice quality or real-world effectiveness. This stainless steel wort chiller also contains a brass hose adapter for an even more attractive, high quality look and feel.
The Stainless Steel Wort Chiller 50’ x 1/2” from MoreBeer! is made entirely in the U.S.
Note: The inner bend on the coils have small indentations that are a natural result of the winding process used during manufacturing. As an upside, these do actually help turbulate the cooling water to eliminate laminar flow (helps increase the cooling capacity).
Product Specifications
50' Stainless tubing
Brass Hose Adaptor
12.75" diameter
12" to the top coil
23" to the bend to go over the lip of the kettle.
1/2" Female thread on one side and 1/2" male thread on the other. Called a street elbow because of the female threads on one side and the male threads on the other. Made from 304 type Stainless Steel.
Tailpieces are fittings which connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with collar nut. Tailpieces are available in a range of barb sizes to fit up to your tubing size. Stainless steel construction means these pieces won’t rust or harbor bacteria that can ruin the taste of your beer. This elbow shaped tailpiece helps you fit your tubing runs in tight spaces, requiring just 1-5/8" clearance above the tap or behind the shank. Use with hex nut (D1740). ID - 3/16" OD - 1/4"
Angled 1/4" tailpiece that is used with hex nut (D1740). Fits on couplers and shanks. Requires 1-1/16" clearance above the coupler or behind the shank. Made from stianless steel. ID - 3/16" OD - 1/4" Kegland Part number: KL05081
3/8" Tailpiece Elbow that is used with a 1" tailpiece hex nut (D1740 / D1741). Fits on couplers and shanks. Requires 1-5/8" clearance above the coupler or behind the shank. Made from stainless steel. ID - 5/16" OD - 3/8"
5/16" Tailpiece Elbow that is used with a 1" tailpiece hex nut (D1740 / D1741). Fits on couplers and shanks. Requires 1-5/8" clearance above the coupler or behind the shank. Made from stainless steel. ID - 1/4" OD - 5/16"
With three places to attach tubing and accessories, this tee gives you the ability to customise your brewing setup.
1/2" Female BSPP on all three openings. Made from stainless steel.
BSP vs. BSPP
BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT.
KegLand Part Number: KL06606
With three places to attach tubing and accessories, this tee gives you the ability to customise your brewing setup.
304 Stainless, 1/2" Female Pipe Thread on all three openings.
2" length x 1.5" width
With three places to attach tubing and accessories, this tee gives you the ability to customise your brewing setup.
1/4" Female BSPP on all three openings. Made from stainless steel.
BSP vs. BSPP
BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT.
KegLand Part Number: KL06590
If you're a brewer with an eye for detail, you’ll want to own this sight glass. The glass insert allows you to watch the flow of your beer during transfer.
Place this Tri-Clamp Sight Glass in-line when you transfer your wort from kettle to fermenter. It is great for monitoring flow and to see how your in-line oxygenator is flowing.
Made from 304-type stainless steel with Tri-Clamp ends. The maximum pressure is 150 PSI, about 10 bar.
H664 features 1.5" TC connections and a 1" ID flow path.
H664B features 1.5" TC connections and a 1.5" ID flow path
H664C features 2" TC connections and a 2" ID flow path
A set of "elbows" is great for connecting hoses to a pump so they run parallel to each other. With 2" and 3" hose, this dramatically reduces the space needed to allow the pump to pass. In addition, having the lines run parallel makes the pump more agile when moving around the brewery or winery when connected.
304-type polished stainless.
Use this 4" T.C. end cap to attach an airlock to your kegmenter unit. The hole measures 13/16", which is perfect for a #3 stopper (FE410VS). Kegland Part Number: KL06163
Quality Tri-Clover fitting made from food safe stainless steel.
This is a 1.5" Tri-Clamp fitting with a 1" Barb. Use with 1" ID tubing. Made of quality 304-type stainless steel. 1.5" long stem.
If you’re a beermaker who focuses on maintaining a sanitary brewing setup, you will like the advantages of using tri-clover connects any place you need to attach tubing to equipment. They make a sanitary connection that is designed to be cleaned in place.The straightforward design makes them easy to clean because there are no pockets or moving parts for bacteria to get stuck in. They make a very sturdy connection that doesn’t leak. Each connection requires a gasket and a clamp.
Product Specifications
Stainless Steel
1/2 in., 1.5 in.
Tri-Clamp Connection
Converts 1.5" Clover to 1/2" Barb for connecting 1/2" ID Tubing.
If you’re a beermaker who focuses on maintaining a sanitary brewing setup, you will like the advantages of using tri-clover connects any place you need to attach tubing to equipment. They make a sanitary connection that is designed to be cleaned in place.The straightforward design makes them easy to clean because there are no pockets or moving parts for bacteria to get stuck in. They make a very sturdy connection that doesn’t leak. Each connection requires a gasket and a clamp.
Product Specifications
Stainless Steel
3/8 in., 1.5 in.
Tri-Clamp Connection
Converts 1.5" Clover to 3/8" Barb for connecting 3/8" ID Tubing.
This cross fitting features 1.5" T.C. connections at all ends and is made from high-quality stainless steel.
1.5" tri-clamp
5.75" long x 5.75" tall
Made from 304 stainless steel
