Stainless Lock Nut. 1/4 in. Female BSPP.
BSP vs. BSPP
BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT.
KegLand Part Number: KL06507
Stainless Lock Nut. 3/4 in. Female BSPP.
BSP vs. BSPP
BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT.
KegLand Part Number: KL06538
Stainless Lock Nut. 3/8 in. Female BSPP.
BSP vs. BSPP
BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT.
KegLand Part Number: KL06514
Stainless Steel Straight External Threaded Pipe Nipple 1/2 in. BSP. This is often used to join two female BSP or NPT fittings. As it has a parallel thread (BSPP) it is perfect for attaching stainless ball valves to pots and stuff like that too. If you want to install this onto a pot you just need to drill a hole that is about 20.5mm diameter.
KegLand Part Number: KL03667
Wall mount 2" OD piping Perfect for hard piped brewing systems Highly recommended for the bulky KegLand Activated Carbon Filter kits Pipe hanger clamps are quite useful if you want to mount 2" tubing to your wall, whether it be tri-clamp extension tubes for hard piped brewing systems or bulky accessories like activated carbon filters for distilled spirits. Made from 304 stainless steel. DN50 suitable for 2" to 2.25" OD tubing. We recommend purchasing at least two hanger clamps for wall mounting. KegLand Part Number: KL13116
1/2" male BSPP stainless steel plug. Hex head design for easy installation or removal with a wrench.
BSP vs. BSPP
BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT.
KegLand Part Number: KL06408
1/4" male BSPP stainless steel plug. Hex head design for easy installation or removal with a wrench.
BSP vs. BSPP
BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT.
KegLand Part Number: KL06392
Ideal for racking in and out of barrels, or any other medium-sized vessels without a bottom valve. The built-in Sediment Pin allows you to set how far from the bottom of the vessel you want the wand to draw from. Side draw ports help pull in beer without drawing sediment. Durble, easy to clean stainless steel construction.
Specifications:
AISI304 Stainless Steel construction
30" Long straight (usable) portion of racking cane
1" Diameter Tubing
1.5" Tri-Clamp Connection
Stainless steel reducing bush. 1/2" BSP x 1/4" BSP. Made from stainless steel.
BSP vs. BSPP
BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT.
KegLand Part Number: KL06569
Stainless steel reducing bush. 1/4" BSP x 1/8" BSP. Made from stainless steel.
BSP vs. BSPP
BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT.
KegLand Part Number: KL06545
Stainless steel reducing bush. 3/8" BSP x 1/4" BSP. Made from stainless steel.
BSP vs. BSPP
BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT.
KegLand Part Number: KL06552
1/2" MNPT Plug. Made from a solid chunk of stainless that has been machined down. Nicer looking finish and hefty feel when compared to most plugs. Uses a 7/8" wrench.
Stainless Spigot for the Speidel plastic fermenter. This is a great upgrade if you are looking to improve your fermenter with a sturdier spigot. Made from 304 stainless steel.
3/8" barb on outlet
This is THE spoon for brew day!
Made of stainless steel, the homebrewer’s favorite. Nice long handle for stirring wort or mash in deep kettles & coolers. Won’t deteriorate over time like plastic. Easy to clean and sanitize.
21" in length.
Type C Camlock Fitting. Female Camlock with 1/2" Barb (13mm).
Camlock fittings are the preferred choice for many home and professional brewers alike. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability.
304 Stainless steel construction. 150 psi working pressure.
Kegland Part Number: KL04497
Type D Camlock Fitting. Female Camlock with 1/2" Female BSP.
Camlock fittings are the preferred choice for many home and professional brewers alike. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability.
304 Stainless steel construction. 150 psi working pressure.
Kegland Part Number: KL04473
Type B Camlock Fitting. Female Camlock with 1/2" Male BSP.
Camlock fittings are the preferred choice for many home and professional brewers alike. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability.
304 Stainless steel construction. 150 psi working pressure.
Kegland Part Number: KL04480
Camlock to tri-clamp adapter. Perfect if you prefer camlock fittings on your tubing lines and own a brewing kettle, pump, or fermenter with tri-clamp fittings.
Male camlock fitting x 1.5" tri-clamp. Made from 304 stainless steel.
KegLand Part Number: KL20237
Type E Camlock Fitting. Male Camlock with 1/2" Barb (13mm).
Camlock fittings are the preferred choice for many home and professional brewers alike. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability.
304 Stainless steel construction. 150 psi working pressure.
Kegland Part Number: KL04527
Type A Camlock Fitting. Male Camlock with 1/2" Female BSP.
Camlock fittings are the preferred choice for many home and professional brewers alike. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability.
304 Stainless steel construction. 150 psi working pressure.
Kegland Part Number: KL04503
Type F Camlock Fitting. Male Camlock with 1/2" Male BSP.
Camlock fittings are the preferred choice for many home and professional brewers alike. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability.
304 Stainless steel construction. 150 psi working pressure.
Kegland Part Number: KL04510
Bottle washers make clean up and bottle maintenance much easier to deal with! Using one of our bottle washers is definitely the fastest way to clean bottles and carboys. Works great on build up!
Our stainless bottle washer creates a jet-style stream that penetrates build-up in bottles or carboys. It is automatically activated when a bottle is pressed down onto the unit. Female hose thread connection.
A distiller's parrot is a piece of equipment that allows you to take alcohol gravity measurements using an Alcometer continuously throughout your pot or reflux run. It should be placed inline of your distillation outlet so that the drops of distillate fall directly into the tallest collection cone. But it should only placed in-line after you collect your foreshots. Your alcometer is then gently placed into the lower cone. Be careful not to drop in the alcometer before there is any liquid/distillate in the cone, as dropping it into an empty cone could break your glass alcohol meter.
Specifications:
Max Capacity: 105 ml (w/o alcometer)
Weight: 1.9 lbs
Made from 304 Stainless Steel
Kegland Part number: KL14823
I.D. of 19mm (0.74")
Does not include alcohol meter.
If you've stuffed your kegerator to max capacity, this simple door latch will give you peace of mind. Keeping the door tightly sealed will make sure you're getting optimal efficiency from the kegerator and guarantee the door won't pop open if you have all of your kegs packed in tight. The Double-Wide kegerator comes with pre-tapped mounting holes to install the optional door latch.
A power drill is recommended for mounting the fridge-side latch piece.
This stainless steel strainer is 10.25" in diameter, and features a double mesh basket with a wooden handle. Great for straining hops, wort, and adjuncts during the brewing process.
This 50' x 3/8" coil, manufactured in the MoreBeer! metal shop, is perfect for the enterprising homebrewer who wants to build or upgrade a jockey box. When compared with 5/16" coils that are usually used to make draft boxes, the 3/8" coil holds more beer and offers more surface area for faster cooling. And, because there is less resistance from the larger diameter tubing, the beer can be pushed through the lines with less CO2 pressure. Lower applied CO2 pressure means your beer will not over carbonate and foam wildly if a keg is left on tap for longer than an afternoon. Over-carbonation is often an issue for homebrewers or beer drinkers who are using a draft box for an overnight party or weekend.
8 1/2" wide x 10" tall.
304 grade stainless steel
This 50' x 3/8" coil, manufactured in the MoreBeer! metal shop, is perfect for the enterprising homebrewer who wants to build or upgrade a jockey box. When compared with 5/16" coils that are usually used to make draft boxes, the 3/8" coil holds more beer and offers more surface area for faster cooling. And, because there is less resistance from the larger diameter tubing, the beer can be pushed through the lines with less CO2 pressure. Lower applied CO2 pressure means your beer will not over carbonate and foam wildly if a keg is left on tap for longer than an afternoon. Over-carbonation is often an issue for homebrewers or beer drinkers who are using a draft box for an overnight party or weekend.
8 1/2" wide x 10" tall.
304 grade stainless steel
For insulated 5 gallon beverage containers, like our Rubbermaid coolers, or any container with at least a 9" opening at the top - such as a bucket. Made from stainless steel with 3/32 perforated holes on 5/32 centers. The barb fitting is 3/8 inch.
This domed false bottom works great with most 10 gallon insulated cooler mash tuns or kettles with a similar diameter. The dome shape design adds strength so it can handle a heavy load of grain. Comes with 13 mm (.51") barb which is perfect for 1/2" ID silicone tubing.
Made from 304 stainless steel. 30 cm (11.8") diameter.
KegLand Part Number: KL01250
The Super Hop Filter is designed to rest inside your kettle and keep hops and other vegetal matter from transferring out with your wort. This is a great alternative to hop bags which have the potential to decrease hop utilization. While using this filter basket you can add hops directly to your kettle for maximum wort exposure.
The 13.75" diameter will fit most 10-gallon or larger kettles. It's also wide enough that most immersion chillers can rest inside the basket during chilling.
Made from 304 stainless steel
300 micron mesh
Lifting handle
Hooked feet to keep it off the kettle floor
13.75" H x 13.75" Ø
This stainless steel funnel is a great option for filling 1-gallon glass jars for food fermentation. Includes a small filter screen to keep out any undesired vegetal matter. The screen also works great for infusing herbs into olive oil. Simply place your herbs and spices onto the strainer and pour your olive oil through the funnel and into the receiving vessel.
Take your beer on the go with the help of this handy growler filler attachment for Perlick 630SS and 650SS faucets. Filling growlers straight from the tap is tough task, and you're more than likely to lose most of the beer's carbonation in the process. By running a short line of 3/8" tubing from the growler filler to the bottom of your growler, the beer can flow gently into the vessel and fill from the bottom up. Be sure to use the flow control knob to slow down the flow rate. If you're using the standard faucet, you may want to turn down the PSI on your regulator before filling.
This is a rather simple, but extremely effective way to fill growlers from your draft system! Going to a party, but don't want to bring a keg of homebrew? Filling straight from the faucet creates a lot of foam, and you lose carbonation. Simply plug this filler into your faucet, attach some 3/8" tubing, and fill! This model is designed to fit Intertap faucets.
Compatible with Intertap and NukaTap faucets.
Kegland Part number: KL01045
These handles are made from 304 stainless steel and held together with stainless steel bolts. Rated up to 220 lbs. Compatible with all sizes of FermZilla Conical, Flat Bottom, and All Rounder fermenters.
Kegland Part number: KL13079
Hoffman Clamps, or screw compressor clamps, are used to control the flow in flexible tubing. The clamp has a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing.
This can be particularly useful when regulating the flow of sparge water, collecting sweet wort from your mash tun, or liquid management applications of a still.
Max Tubing OD: 30mm / 1.18"
KegLand Part Numbers: KL37891
Used to stir up lees in a barrel or to ensure a complete mix of so2 or any other addtives, our stainless steel lees stirrer with 24" solid stainless shaft and fold out stainless paddle will get the job done quickly and efficiently. Connect to drill and use on lowest speed. Included black plastic bung seals barrel while stainless shaft spins freely.
This heavy-duty mash paddle will rip through your mash tun like slicing through butter with a light saber! Drilled holes provide less resistance when breaking up dough balls. Tig welded and made from 304 stainless steel.
The paddle is 76cm (29.9") in total length with a paddle head measurement of 23cm x 14cm (9" x 5.5").
KegLand Part Number: KL03797
The Stainless Pegboard turns the back of your cabinet into an instant, organized hanging storage wall—keeping tools, utensils, brewing hoses, measuring cups, spoons, tongs, or small parts right at your fingertips and off the work surface. Crafted from durable, corrosion-resistant 304 stainless steel to match your cabinet’s premium top, this pegboard is built for outdoor use: weatherproof, easy to clean, and designed to withstand the demands of patio kitchens, brew stations, grill setups, or workshops. It mounts securely to the rear of any Modular Utility Cabinet using the included mounting brackets and hardware—simple bolt-on installation with no drilling or modifications required.
Pegboard hooks are not included.
Features:
Instant accessibility — Hang frequently used items for quick grab-and-go during brew day, grilling, or entertaining.
Customizable layout — Standard pegboard hole spacing lets you arrange hooks exactly how you need them.
Premium match — Brushed stainless finish complements the cabinet’s aesthetic for a cohesive, professional look.
Rugged & hygienic — Stainless construction resists rust, stains, and easy wipe-downs after messy sessions.
With the FermZilla Pressure Kit you can ferment under pressure, carbonate, and serve without ever needing to move your beer out of the fermenter. The kit inlcudes two stainless female threaded ball lock fittings with barbs, which thread onto the existing openings atop the FermZilla's lid. For the beverage out, you'll have a silicone dip tube with stainless steel float, allowing you to always draw from the clearest beer at the top of the tank. Pick up the Pressure Kit and turn your FermZilla into a true unitank! The silicone dip tube is 31" long. It will work perfectly as is for the 55L FermZilla. For the 27L model we recommend cutting the dip tube shorter to remove unwanted slack. With the optional Floating Dip Tube Filter, you can prevent hop material and other solids from ever entering the dip tube. Especially handy when you're pulling samples mid-fermentation! Fermenting Under Pressure:
The pressure kit allows for fermenting under pressure, which will reduce esters and fusel alcohol production. This means you can ferment at warmer temperatures than you normally would, even making lagers at room temperature. Most commerical beer is fermented under pressure simply due to the size of commercial tanks and the pressure that is created by the column of beer. It is one of the distinct differences between homebrewing and brewing on a commercial scale. The FermZilla's lid already comes with a built-in pressure relief valve that will blow at 35 psi; the pressure kit simply allows you to add CO2 through the ball lock fitting. We strongly recommend that you also purchase an adjustable pressure relief valve, or spunding valve, which allows you to set a lower pressure. It's always a good idea to have two relief valves on the FermZilla anytime the unit is under pressure. Carbonating, Transferring, and Serving:
When you are fermenting under pressure the beer is already carbonated when you are done fermenting. You can control the level of carbonation by using a spunding valve. This means you can eliminate kegging and serve directly from the fermenter. We love this idea but there will probably still be times that you want to keg. Attach a beer line from the FermZilla's bev out to your keg and enjoy the easiest kegging experience ever. You can also choose to send carbonated beer through a beer filter on the way to your keg. When applying pressure with a CO2 tank also make sure that you have a functional relief valve on your CO2 regulator. Eliminate Oxidation:
Since the beer always has a CO2 blanket through fermentation and during any transfers out, oxidation is eliminated. When you cold crash you won't be sucking air back in through an airlock. Key Features:
Ferment beer under pressure to reduce ester and fusel alcohol production Always draw clear beer with the floating dip tube Keg beer that has already been carbonated Use CO2 to push beer into a keg or through a filter into a keg Eliminate kegging altogether by carbonating and serving directly from the FermZilla Installation Note: For best performance, ensure there is not an excess amount of slack when the silicone dip tube is installed and shorten it if needed. With the floating dip tube installed on your empty FermZilla, you ideally want the dip tube to hang freely with just enough length for the end of the dup tube to touch the bottom of the tank. Please note: pressure kit does not include the lid pictured in the example photo. The ball locks and floating dip tube are installed on the FermZilla's existing lid.
Upgrade your MKII pump with a 304 stainless steel replacement head. Stainless steel is more durable if you are attaching ball valves. Very occasionally the threads on the plastic head that comes standard on the MKII can break if you are using hard to close ball valves that apply a lot of torque. Stainless steel is very robust and will not break, is food grade, and well... stainless. Before you snag the stainless center-inlet head, also consider the stainless inline tri-clamp head. Kegland Part Number: KL03865
