New Products Check out what's hot & new
BECOME A VIP Join the VIP text list
Detecting your location...
$150 OFF your KOMOS build Orders $1,200+ · Code KOMOS150 · Ends in 14 days
Shop the Event
Beer Shanks

Beer Faucet Shank | Pass Through | Stainless | 4"

    Description

    You can use pass through shanks for beer entry through the back side of a cooler. Drill a 1" hole through the cooler, insert the shank, and use the two attached nuts to tighten up on the cooler. You will need nuts and nipples of the size line you are working with as well as hose clamps. We do not use pass through shanks in our boxes because we drill a hole that is same size as the line so we can pull it back in when we are traveling. However there might be instances where they would be appropriate. Pass through shanks can also be used to put through the side of a refrigerator to pass a gas line through

    Installation Note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

    This is a stainless steel shank with chrome plated brass hex nuts.

    Dimensions:

    • 4" - Shank Length
    • 4" - Thread Length
    • 2-3/4" - Pass Through Length
      • Max length with hex nuts at either end
      • Does not account for nuts/nipples you may install
    • Male Beer Thread (5/8" BSP)

     

    Beer Faucet Shank | Pass Through | Stainless | 4"

      Product form

      SKU: D1923

      $29.99

      Calculating shipping time...
      Shipping
      Free Shipping*
      Shipping
      Paid Shipping
      Drop Ship
      Drop Ship
      Discount Exclusion
      Discount Exclusion
      Freight
      Freight Only
      Pre-book
      Pre Order

        Prop 65 Warning WARNING : This product can expose you to chemicals including Lead and lead compounds, which is/are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

        Description

        You can use pass through shanks for beer entry through the back side of a cooler. Drill a 1" hole through the cooler, insert the shank, and use the two attached nuts to tighten up on the cooler. You will need nuts and nipples of the size line you are working with as well as hose clamps. We do not use pass through shanks in our boxes because we drill a hole that is same size as the line so we can pull it back in when we are traveling. However there might be instances where they would be appropriate. Pass through shanks can also be used to put through the side of a refrigerator to pass a gas line through

        Installation Note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

        This is a stainless steel shank with chrome plated brass hex nuts.

        Dimensions:

        • 4" - Shank Length
        • 4" - Thread Length
        • 2-3/4" - Pass Through Length
          • Max length with hex nuts at either end
          • Does not account for nuts/nipples you may install
        • Male Beer Thread (5/8" BSP)

         

        Important Warnings & Shipping Info +
        Shipping Icon
        Free Shipping: Fast & Free Shipping over $79
        Shipping Icon
        Shipping Rates Apply: Bulk items like grain, bottles, and malt are excluded from our free shipping promotion due to their weight, and often dropship items. Standard shipping rates apply and are calculated at checkout based on your location and order size.
        Drop Ship Icon
        Drop Ship: This product will ship directly from the supplier. Delivery may take 1-4 weeks depending on the vendor.
        Discount Exclusion Icon
        Discount Exclusion: This item is not eligible for sitewide price reductions or percentage discounts. Learn more.
        Freight Icon
        Freight Shipping: This item ships freight only.
        Pre-book Icon
        Pre Order: This item is available for Pre-Order. Full payment is required to reserve stock.
        Shipping Weight: 0.7 lb

        You Might Also Need

        Stainless Tailpiece - 1/4 in. (Elbow)
        Stainless Tailpiece - 1/4 in. (Elbow)
        $7.39
        Tailpiece Gasket
        Tailpiece Gasket
        $1.19
        KOMOS® Pro Draft Wrench | Multi Purpose Beer Faucet Wrench | Pin Wrench | Screwdriver | Regulator Wrench | Shank Coupler & Lock Nut Nut Wrench
        KOMOS® Pro Draft Wrench | Multi Purpose Beer Faucet Wrench | Pin Wrench | Screwdriver | Regulator Wrench | Shank Coupler & Lock Nut Nut Wrench
        $18.69
        Step Drill Bit | Self-Starting | HSS High Speed Steel | Titanium Nitride Coated | 0.15 – 0.78 in.
        Step Drill Bit | Self-Starting | HSS High Speed Steel | Titanium Nitride Coated | 0.15 – 0.78 in.
        $10.99

        Login

        Forgot your password?

        Don't have an account yet?
        Create account