FermZilla Parts & Accessories

With the FermZilla Pressure Kit you can ferment under pressure, carbonate, and serve without ever needing to move your beer out of the fermenter. The kit inlcudes two stainless female threaded ball lock fittings with barbs, which thread onto the existing openings atop the FermZilla's lid. For the beverage out, you'll have a silicone dip tube with stainless steel float, allowing you to always draw from the clearest beer at the top of the tank. Pick up the Pressure Kit and turn your FermZilla into a true unitank! The silicone dip tube is 31" long. It will work perfectly as is for the 55L FermZilla. For the 27L model we recommend cutting the dip tube shorter to remove unwanted slack. With the optional Floating Dip Tube Filter, you can prevent hop material and other solids from ever entering the dip tube. Especially handy when you're pulling samples mid-fermentation! Fermenting Under Pressure: The pressure kit allows for fermenting under pressure, which will reduce esters and fusel alcohol production. This means you can ferment at warmer temperatures than you normally would, even making lagers at room temperature. Most commerical beer is fermented under pressure simply due to the size of commercial tanks and the pressure that is created by the column of beer. It is one of the distinct differences between homebrewing and brewing on a commercial scale. The FermZilla's lid already comes with a built-in pressure relief valve that will blow at 35 psi; the pressure kit simply allows you to add CO2 through the ball lock fitting. We strongly recommend that you also purchase an adjustable pressure relief valve, or spunding valve, which allows you to set a lower pressure. It's always a good idea to have two relief valves on the FermZilla anytime the unit is under pressure.   Carbonating, Transferring, and Serving: When you are fermenting under pressure the beer is already carbonated when you are done fermenting. You can control the level of carbonation by using a spunding valve. This means you can eliminate kegging and serve directly from the fermenter. We love this idea but there will probably still be times that you want to keg. Attach a beer line from the FermZilla's bev out to your keg and enjoy the easiest kegging experience ever.  You can also choose to send carbonated beer through a beer filter on the way to your keg.  When applying pressure with a CO2 tank also make sure that you have a functional relief valve on your CO2 regulator.     Eliminate Oxidation: Since the beer always has a CO2 blanket through fermentation and during any transfers out, oxidation is eliminated. When you cold crash you won't be sucking air back in through an airlock.   Key Features: Ferment beer under pressure to reduce ester and fusel alcohol production Always draw clear beer with the floating dip tube Keg beer that has already been carbonated Use CO2 to push beer into a keg or through a filter into a keg Eliminate kegging altogether by carbonating and serving directly from the FermZilla Installation Note: For best performance, ensure there is not an excess amount of slack when the silicone dip tube is installed and shorten it if needed. With the floating dip tube installed on your empty FermZilla, you ideally want the dip tube to hang freely with just enough length for the end of the dup tube to touch the bottom of the tank. Please note: pressure kit does not include the lid pictured in the example photo. The ball locks and floating dip tube are installed on the FermZilla's existing lid.

Read more less

The Temp Twister Cooling Coil is the ideal option for maintaining fermentation temperatures in any model FermZilla. Use an IceMaster Glycol Chiller or ice bath with submersible pump to push coolant through the coil when temps get too hot. Designed for the FermZilla but can can be used with virtually any fermenter that has an opening diameter of 4-3/8" or wider. The inlet and outlet are extra long so the coil can be used with every sized FermZilla. In order to cut them to an appropriate length for your application, we recommend this compact pipe cutter. To install, simply drill two 22 mm (approx. 7/8") holes into the lid of the fermenter and use the included Duotight bulkhead fittings to attach the coil to the lid. The FermZilla will still be pressurizable after installing the Temp Twister, just be careful to drill the holes no wider than needed to fit the Duotight bulkheads. If you're using the Temp Twister with EVABarrier tubing, we suggest adding 2 x DUO112 to your order to help route your inlet and outlet lines. Specifications: Coil Diameter - 4.33" Coil Height - 14" Overall Length - 26.75" Tubing Diameter - 3/8" OD Made from 304 Stainless Steel Includes 2 x 9.5 mm Duotight bulkheads Kegland Part number: KL14618  

Read more less

With the FermZilla Pressure Kit you can ferment under pressure, carbonate, and serve without ever needing to move your beer out of the fermenter. The kit inlcudes two plastic female threaded ball lock fittings with barbs, which thread onto the existing openings atop the FermZilla's lid. For the beverage out, you'll have a silicone dip tube with stainless steel float, allowing you to always draw from the clearest beer at the top of the tank. Pick up the Pressure Kit and turn your FermZilla into a true unitank! Includes one red and one yellow ball lock cap to help differentiate which one is being used for liquid and which one for gas. Either color can be used for either function. The silicone dip tube is 31" long. It will work perfectly as is for the 55L FermZilla. For the 27L model we recommend cutting the dip tube shorter to remove unwanted slack. With the optional Floating Dip Tube Filter, you can prevent hop material and other solids from ever entering the dip tube. Especially handy when you're pulling samples mid-fermentation! Fermenting Under Pressure: The pressure kit allows for fermenting under pressure, which will reduce esters and fusel alcohol production. This means you can ferment at warmer temperatures than you normally would, even making lagers at room temperature. Most commerical beer is fermented under pressure simply due to the size of commercial tanks and the pressure that is created by the column of beer. It is one of the distinct differences between homebrewing and brewing on a commercial scale. The FermZilla's lid already comes with a built-in pressure relief valve that will blow at 35 psi; the pressure kit simply allows you to add CO2 through the ball lock fitting. We strongly recommend that you also purchase an adjustable pressure relief valve, or spunding valve, which allows you to set a lower pressure. It's always a good idea to have two relief valves on the FermZilla anytime the unit is under pressure.   Carbonating, Transferring, and Serving: When you are fermenting under pressure the beer is already carbonated when you are done fermenting. You can control the level of carbonation by using a spunding valve. This means you can eliminate kegging and serve directly from the fermenter. We love this idea but there will probably still be times that you want to keg. Attach a beer line from the FermZilla's bev out to your keg and enjoy the easiest kegging experience ever.  You can also choose to send carbonated beer through a beer filter on the way to your keg.  When applying pressure with a CO2 tank also make sure that you have a functional relief valve on your CO2 regulator.     Eliminate Oxidation: Since the beer always has a CO2 blanket through fermentation and during any transfers out, oxidation is eliminated. When you cold crash you won't be sucking air back in through an airlock.   Key Features: Ferment beer under pressure to reduce ester and fusel alcohol production Always draw clear beer with the floating dip tube Keg beer that has already been carbonated Use CO2 to push beer into a keg or through a filter into a keg Eliminate kegging altogether by carbonating and serving directly from the FermZilla Installation Note: For best performance, ensure there is not an excess amount of slack when the silicone dip tube is installed and shorten it if needed. With the floating dip tube installed on your empty FermZilla, you ideally want the dip tube to hang freely with just enough length for the end of the dup tube to touch the bottom of the tank. Please note: pressure kit does not include the lid pictured in the example photo. The ball locks and floating dip tube are installed on the FermZilla's existing lid.

Read more less

Replacement Flat Lid for FermZilla. Includes o-ring. Fits all models and sizes of FermZilla fermenters.

Read more less

This handy little strap will make cleaning and transporting your FermZilla All Rounder 30L or 60L an absolute breeze. Instead of picking up the tank with one hand and the stand with the other every time you need to move it, this harness will strap the tank and stand together so they can be moved together as one piece. Simply attach through both sections of the base in the orientation you wish. Slide up and out of the little buckle pieces making sure that the buckle is facing towards you, then strap in and strap down! Please note that the harness does not include handles. The harness is meant to be used alongside the All Rounder's included stainless handle. The Strap is long enough for the 60L and 30L All Rounder. We recommend rolling up the excess strap and paper clipping or cutting to suit the 30L. Stainless handles not included with the carrier harness. Kegland Part number: KL13567  

Read more less

If you're a FermZilla owner, we highly recommend picking up an additional collection container or two. Use one to harvest and store your yeast, and then a second for your dry hop additions. Or harvest and store multiple yeast cultures in multiple collection containers. The collection container features threaded ports that are compatible with the KG500 Ball Lock Cap. Attaching the ball lock cap will allow you to purge the container of oxygen before dry hopping. Or attach a small length of tubing with a diffusion stone and you'll be able to oxygenate your wort or carbonate your finished beer from the bottom up. The container is made from Tritan and the lid from HDPE. Kegland Part number: KL11365  

Read more less

Use this insulating jacket to regulate the fermentation temperature in your 27L FermZilla Conical or 60L FermZilla All Rounder. The jacket alone will help keep your fermenter warm in the colder months, or you can add a FermWrap heater if the heat fermentation isn't enough to maintain temp. Conversely, you can freeze bottles of water and put them inside the jacket to keep the temperature from getting too hot. If you're feeling extra fancy, use frozen water bottles and a FermWrap plugged into a temperature controller. The frozen water bottles will provide constant cooling, and if the controller detects that the temperature has dropped too far, it will kick on the FermWrap to heat your fermenter back up to your target temp. The jacket has the added benefit of protecting your fermenting beer from harmful UV light. Features a single sided zipper and draw string bottom. Kegland Part number: KL11488  

Read more less

The Flat Twister Lid comes with 3 pre-drilled holes perfectly sized for the Duotight bulkheads that come with the Temp Twister Cooling Coil and FermZilla Thermowell. Lid o-ring included. This lid is only recommended for FermZilla users that will be using the Temp Twister and the Thermowell together. Kegland Part number: KL15059  

Read more less

Direct replacement of the 31" floating dip tube included with the FermZilla Pressure Kits. If you're looking for a floating dip tube to use with your homebrew keg, we recommend the Torpedo Buoy™, which includes an appropriately sized metal dip tube and features a higher quality silicone tubing. Kegland Part number: KL14076

Read more less

This heating wrap provides excellent coverage for your FermZilla Conical, All Rounder, glass carboy, or PET fermenter. The large surface area ensures that heat is applied evenly to your fermenting beer. The 30-watt goes even further when paired with insulation and will lead to less temperature swings. It will provide plenty of heat while still being perfectly safe to use with plastic fermenters. And it features a convenient Velcro strap to hold itself in place—no need for electrician's tape that will leave gunky residue behind! For the ultimate temperature control with your FermZilla, pair the heat wrap belt with the Temp Twister Cooling Rod and control both heating & cooling with an Inkbird Temperature Controller. 110V plug. Approx. 39" x 9.75" KegLand Part Number: KL26048

Read more less

Replacement pressure relief valve rated to blow at 35 psi. This is a direct replacement of the PRV featured on the FermZilla and Kegmenter. It is also compatible with homebrew kegs and the KOMOS® CO2 regulator if you desire a lower blowoff pressure.

Read more less

These handles are made from 304 stainless steel and held together with stainless steel bolts. Rated up to 220 lbs. Compatible with all sizes of FermZilla Conical, Flat Bottom, and All Rounder fermenters. Kegland Part number: KL13079

Read more less

If you're installing a stainless thermowell or Temp Twister Cooling Coil on your FermZilla, this pipe cutter will help make the process painless. This easy to use pipe cutter makes cutting copper, stainless steel, or aluminum tubing an absolute breeze. Easy to use and compact so it can get into tight corners and gives you a clean pipe cut. Simply hand tighten the pipe cutter onto the mark where you want to cut the pipe. Rotate the cutter around the pipe a couple of times to create a groove all around the pipe, and then each time you rotate the cutter, tighten the blade a little. Each rotation will cut a little deeper into the pipe and the cut will be straight. Suitable for 1/8"-3/16" pipe (3-22 mm) Cuts copper, brass, aluminum, steel, and stainless steel Heavy-duty one-piece slide Polished roller for easy rotation Hardened steel cutting blade Kegland Part Number: KL14557

Read more less

Upgrade your FermZilla Conical or All Rounder with the new 2" Tri-Clamp Lid from KegLand. Add yeast, hops or even take samples from a wine thief from the top and not have to remove the entire lid. This particular lid was designed in order to suit a growing number of customers desire to dry hop without exposing the batch to oxygen from opening the lid. By using this lid in conjunction with the FermZilla 2" Butterfly Valve and Hop Bong Kit, you will be able to purge CO2 into the tube and expel all the oxygen inside it and dump freely into the vessel. Features: (2) PCO1881 Male Ports Recommended for use with Red (Gas In) & Yellow (Bev Out) Ball Lock Caps PRV Port with Red 35 psi (2.5 BAR) PRV 2" T.C. Ferrule Undrilled Ports (for optional accessories): Thermowell Port (see below for FermZilla Thermowell kit) (2) Temp Twister Ports Please Note: Temp Twister will need to be bent on a 20° Angle in order to fit on the curved lid and align vertically in the tank.  Also includes: 2" Tri-Clamp 2" T.C. Gasket 2" T.C. x PCO1881 Male Thread Cap If you ever need to replace the O-ring attached to the bottom of the Pressure Lid, a Corny Keg Lid O-ring fits perfectly. KegLand Part Number: KL28219 Warning: Always depressurize your system COMPLETELY before removing fittings from your fermenter. Warning: Only use Red 35 psi PRV with this lid. Ensure the PRV is cleaned and dried of sticky residue before each fermentation. Failure to do so could cause injury and void warranty.

Read more less

Adjustable relief valve installs on standard ball lock keg posts Use with any ball lock keg to control flow during closed pressure transfers Integrated pressure gauge can be swapped out with a digital gauge or large face dial gauge for easier, more accurate readings Adjustable black cap can be swapped out for color coded PRVs with a fixed pressure Low-profile design only measures 1.75" in height This easy to use and compact pressure relief valve is super handy for keg transfers. Using a ball lock quick disconnect as the main body, the valve easily snaps onto ball lock keg posts. Adjustable relief valves are a great way to limit oxygen exposure and regulate flow during closed keg transfers, The included gauge reads from 0-30 PSI and can be swapped out with a digital gauge or large face dial gauge for easier, more accurate readings. The black pull ring cap on the other end can be rotated for adjustments, or swapped to a range of color coded PRVs for a fixed pressure. This low-profile option only measures 1.75" in height. It works right out of the box but has several upgrade options as shown in the images. Warning: Never swap out the valve's standard PRV with a color coded PRV that exceeds the pressure rating of your vessel. Features: Duotight fitting where the gauge attaches This allows for upgrading the valve with a digital gauge or larger analog gauge Manual pull ring pressure relief This allows for you to not only adjust the pressure with the black rotary knob but also use the ring pull to instantly release pressure if you want to release manually Option for several color coded PRVs to be used (see below) Yellow - 17 psi Red - 35 psi Green - 65 psi Gray - 100 psi KegLand Part Number: KL29438

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops. If you're an existing FermZilla Conical or All Rounder user and you already own the Pressure Kit with 2x Ball Lock Caps and floating dip tube, check out the Hop Bong Upgrade Kit. The 3 Pieces of the Hop Bong Pressure Pack: Pressure Kit ​The Pressure Kit includes two Ball Lock Caps with the Floating Dip Tube and Filter Attachment. These pieces allow you to pressure transfer finished beer out of the fermenter into kegs or a bottling bucket, or you can carbonate and serve beer directly from the FermZilla. Tri-Clamp Pressure Lid Replacing the standard lid with the FermZilla Tri-Clamp Pressure Lid provides you with a 2" T.C. port at the top of your fermenter. This will give you an opening to add dry hops or other additions without needing to remove the entire lid. Take off the butterfly valve to add your yeast pitch, and when you're ready to add flavoring additions when fermentation is complete, drop them in oxygen-free via the Hop Bong. PCO1881 threaded ports are there for your Ball Lock Caps, as well as undrilled ports for an optional Thermowell and/or Temp Twister cooling coil. Hop Bong  Load up the Hop Bong and add CO2 to purge your hop charge of oxygen. This kit comes with a third Ball Lock Cap to introduce CO2 directly to the Hop Bong, as well as a pull ring PRV to release pressure and purge oxygen. Once you've flushed your hop charge with CO2, open the butterfly valve to inject your beer with up to 6 oz of hop pellets. Hop Pellet Capacity: 150–180g (5.2–6.3 oz) Kit Includes: FermZilla 2" T.C. Pressure Lid Starter Kit 2" Hop Bong 2" FermZilla Tri-Conical Butterfly Valve Floating Dip Tube Weighted Mesh Filter Attachment (KEG6571) Red PRV & PCO1881 Cap Combo Yellow Ball Lock Cap (2) Red Ball Lock Caps (2) 2" Tri-Clamps (2) 2" Silicone T.C. Gaskets KegLand Part Number: KB10897 Installation Note: For best performance, ensure there is not an excess amount of slack when the silicone dip tube is installed and shorten it if needed. With the floating dip tube installed on your empty FermZilla, you ideally want the dip tube to hang freely with just enough length for the end of the dup tube to touch the bottom of the tank. Warning: Always depressurize your system COMPLETELY before removing fittings from your fermenter.

Read more less

Use this insulating jacket to regulate the fermentation temperature in your 30L FermZilla All Rounder. The jacket alone will help keep your fermenter warm in the colder months, or you can add a FermWrap heater if the heat fermentation isn't enough to maintain temp. Conversely, you can freeze bottles of water and put them inside the jacket to keep the temperature from getting too hot. If you're feeling extra fancy, use frozen water bottles and a FermWrap plugged into a temperature controller. The frozen water bottles will provide constant cooling, and if the controller detects that the temperature has dropped too far, it will kick on the FermWrap to heat your fermenter back up to your target temp. The jacket has the added benefit of protecting your fermenting beer from harmful UV light. Features a single sided zipper and draw string bottom. Kegland Part number: KL19590

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. This upgrade kit is for existing FermZilla Tri-Conical and All Rounder Fermenter users that already own the Plastic Pressure Kit with 2x Ball Lock Caps and Floating Dip Tube. If you already own these pieces, then you just need the two accessories below for a complete Hop Bong Pressure Pack. Tri-Clamp Pressure Lid Replacing the standard lid with the FermZilla Tri-Clamp Pressure Lid provides you with a 2" T.C. port at the top of your fermenter. This will give you an opening to add dry hops or other additions without needing to remove the entire lid. Take off the butterfly valve to add your yeast pitch, and when you're ready to add flavoring additions when fermentation is complete, drop them in oxygen-free via the Hop Bong. PCO1881 threaded ports are there for your Ball Lock Caps, as well as undrilled ports for an optional Thermowell and/or Temp Twister cooling coil. Hop Bong  Load up the Hop Bong and add CO2 to purge your hop charge of oxygen. This kit comes with a Ball Lock Cap to introduce CO2 directly to the Hop Bong, as well as a pull ring PRV to release pressure and purge oxygen. Once you've flushed your hop charge with CO2, open the butterfly valve to inject your beer with up to 6 oz of hop pellets. Hop Pellet Capacity: 150–180g (5.2–6.3 oz) Kit Includes: FermZilla 2" T.C. Pressure Lid Starter Kit 2" Hop Bong 2" FermZilla Tri-Conical Butterfly Valve Red PRV & PCO1881 Cap Combo Red Ball Lock Cap (2) 2" Tri-Clamps (2) 2" Silicone T.C. Gaskets Does Not Include: Yellow Ball Lock Cap Secondary Red Ball Lock Cap Floating Dip Tube with Filter Attachment KegLand Part Number: KB10921   Warning: Always depressurize your system COMPLETELY before removing fittings from your fermenter.

Read more less

Use this insulating jacket to regulate the fermentation temperature in your 55L FermZilla Conical. The jacket alone will help keep your fermenter warm in the colder months, or you can add a FermWrap heater if the heat fermentation isn't enough to maintain temp. Conversely, you can freeze bottles of water and put them inside the jacket to keep the temperature from getting too hot. If you're feeling extra fancy, use frozen water bottles and a FermWrap plugged into a temperature controller. The frozen water bottles will provide constant cooling, and if the controller detects that the temperature has dropped too far, it will kick on the FermWrap to heat your fermenter back up to your target temp. The jacket has the added benefit of protecting your fermenting beer from harmful UV light. Features a single sided zipper and draw string bottom. Kegland Part number: KL11495

Read more less

The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. This particular sized tri-clamp Hop Bong was designed for the BrewBuilt X-Series Uni Conical fermenters for their 1.5" T.C. lid port. The side port features PCO1881 male threads so you have the option to add a Ball Lock Cap. When used as a dry hopping device on top of your fermenter, this will allow you to purge your additions of oxygen by flushing them with CO2. When used as a sight glass below your fermenter (if your conical has a 1.5" bottom port, or if you use it along with a 2" x 1.5" reducer), bubble CO2 from the bottom up via the Ball Lock Cap to rouse hops or carbonate finished beer. Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic. Hop Pellet Capacity: 80–120g (2.8–4.2 oz) KegLand Part Number: KL26062

Read more less

The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. This particular sized tri-clamp Hop Bong was designed for the FermZilla Tri-Conical and All Rounder fermenters with the new Tri-Clamp Adapted Pressure Lid. It can also be adapted to any 2" T.C. port in your system to use either inline or as a dry hopping device. The side port features PCO1881 male threads so you have the option to add a Ball Lock Cap. When used as a dry hopping device on top of your fermenter, this will allow you to purge your additions of oxygen by flushing them with CO2. When used as a sight glass below your fermenter, bubble CO2 from the bottom up via the Ball Lock Cap to rouse hops or carbonate finished beer. Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic. Hop Pellet Capacity: 150–180g (5.2–6.3 oz) KegLand Part Number: KL26079

Read more less

The redesigned FermZilla Collection Container attaches directly below the fermenter without the need for a screw top adapter piece Replace your existing 600mL, keep a spare on hand, or upgrade from the original tri-conical collection container with the 3" x 3" Tri-Clamp Butterfly Valve Made from heat resistant, plasticizer-free Tritan plastic and dishwasher safe PCO1881 side ports for use with Ball Lock Carbonation Caps and the PRV Cap Combo 3" tri-clamp, gasket, and end cap included This collection container fits all FermZilla Tri-Conicals with a 3" x 3" Butterfly Valve. No more threads or oil filter removal tools to get this off, simply depressurize and remove the tri-clamp fitting. We recommend placing a towel or upside down frisbee to catch some drips. The clear body is made from Tritan from Eastman Plastics which is heat tolerant and BPA- and plasticizer-free. The ports on the side are the same as a standard coke bottle or soft drink bottle (PCO1881). These are also the same on the top of the FermZilla lid and the previous model collection container. Owners of the FermZilla Tri-Conical that came with the 2" T.C. collection container can upgrade to this collection container by swapping their butterfly valve to the 3" x 3" Tri-Clamp Butterfly Valve. Recommended Accessories: 1 x Ball Lock Carbonation Cap (FE133 or FE146) 1 x Red PRV Cap Combo (KG524) Includes: 600mL Tritan Plastic Collection Container 3" Tri-Clamp Ferrule PCO1881 Carbonation Cap Ports 3" Tri-Clamp (3-Piece) 3" Tri-Clamp Silicone Gasket 3" Tri-Clamp Black Polyketone End Cap Dimensions: 6.7" Tall Tapers from 3" ferrule down to 2.5" diameter bottom KegLand Part Number: KL30366

Read more less

Replacement pressure relief valve rated to blow at 65 psi. This is a direct replacement of the PRV featured on the KOMOS® CO2 regulator. The Green PRV can also be used with pressurizable FermZilla models for hydro testing. Note that under normal operation, the FermZilla should always be used with the Red PRV.  

Read more less

For all you hop bongers out there. We have an end cap for all end caps! Compatible with multiple PCO1881 accessories. Made from high quality engineering plastic and will last a very long time. It's chemically resistant and also designed to resist impact and physical damage. The Hop Bong features a molded PCO1881 port, but depending on your application you might need a second. If using to dry hop, you'll use the Hop Bong port to add CO2 with a Ball Lock Cap and then attach the PRV Cap to the Hop Bong Cap to purge the gas. Use with the 1.5" Hop Bong to attach: Red PRV 1881 Cap Combo Red Ball Lock Cap Yellow Ball Lock Cap KegLand Part Number: KL23610

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Compatible with the 27L and 55L FermZilla Tri-Conical Series or any 2" T.C. fittings. Primarily designed to be used with the FermZilla T.C. Pressure Lid and 2" Hop Bong for oxygen-free dry hopping. If you're planning on putting your FermZilla Tri-Conical or All Rounder in a Fermentation Chamber, you will want to allow for 420 mm (16.5") of clearance measured from the base of the ring collar to a comfortable level below the chamber ceiling so you can pull the PRV to purge oxygen from the hop bong. KegLand Part Number: KL27564

Read more less

Replacement O-Ring for 1,000 mL FermZilla Collection Container. Also compatible with the BrewBuilt Flex Chamber. Kegland Part number: KL11372

Read more less

Weighted cap design keeps the dip tube submerged, maximizing liquid draw and minimizing air intake for consistent performance Prevents hop material and other sediment from clogging your dip tube, ensuring cleaner beer transfers and samples Works seamlessly with Torpedo Keg Buoys, Kegmenter Floating Dip Tubes, and FermZilla Pressure Kits for diverse brewing setups Made with food-grade HDPE and 304 stainless steel, allowing for easy cleaning and sanitization with common brewing cleaners This handy little filter attachment can be used with the Torpedo Keg Buoy, Kegmenter Floating Dip Tube, or FermZilla Pressure Kit to keep hop material from being sucked into the silicone dip tube. This upgrade accessory is especially helpful if you like to dry hop directly in your keg while serving, or if you want to pull clean samples from your FermZilla or Kegmenter during fermentation when there's still a lot of biomatter in solution. Simply remove the metal tube from the ball float, slip the silicone tubing over the barb, then reattach the ball float to one of three clip locations. Made from HDPE and 304 stainless steel, the filter can be boiled or sanitized with the full range of cleaners that we sell. The plastic HDPE is over molded onto the stainless mesh to make a seamless finish. The end cap can easily pop off for cleaning. This updated version of the original Filter Attachment now includes a weighted cap that helps keep the end of the dip tube pointed down and submerged below the liquid surface level. KegLand Part Number: KL41485

Read more less

This stainless ball valve has a PCO 1881 female thread on one side for attaching to the male thread on the FermZilla lid or collection container and a 3/4" BSP Female thread on the other side for attaching other fittings. The 20mm bore (approx.) makes it possible to perform low oxygen dry hopping through the ball valve.  

Read more less

Replacement black PCO1881 cap for the FermZilla lid. This is the cap with airlock hole and grommet. For the solid cap, see here.  

Read more less

If you want to install the Temp Twister & Thermowell on your FermZilla's plastic lid, this step drill bit is the recommended tool for the job. Suitable for drilling holes in plastic, wood, stainless steel, and other metals. You can use this drill bit to install valves or bulkheads on a stainless kettle, bore out a hole for a draft shank, or drill out the pilot hole found on many KegLand drip trays. For best results when drilling through metal, make sure to drill slowly (less than 600 rpm). Apply significant pressure behind the drill as you cut through. Cutting lubricant is recommended. Note that fast drill speeds will cause the metal and the bit to heat up which can shorten the lifespan of the drill bit. Specs: Drill Speed: 200-800 RPM Can Drill Hole Sizes: 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm Hole Size Range (Imperial): 0.15" – 0.78" Coating: Titanium Nitride Suitable for: Metal, wood, plastic Tip: Self starting tip (no pilot hole required or center punch) KegLand Part Number: KL09447  

Read more less

For all you hop bongers out there. We have an end cap for all end caps! Compatible with multiple PCO1881 accessories. Made from high quality engineering plastic and will last a very long time. It's chemically resistant and also designed to resist impact and physical damage. The Hop Bong features a molded PCO1881 port, but depending on your application you might need a second. If using to dry hop, you'll use the Hop Bong port to add CO2 with a Ball Lock Cap and then attach the PRV Cap to the Hop Bong Cap to purge the gas. Use with the 2" Hop Bong to attach: Red PRV 1881 Cap Combo Red Ball Lock Cap Yellow Ball Lock Cap KegLand Part Number: KL23627

Read more less

Replacement Threaded Lid Ring for FermZilla. Fits all models and sizes of FermZilla fermenters. Kegland Part number: KL11396

Read more less

Replacement Graduation Sticker for 27L FermZilla Conical. Kegland Part number: KL11433

Read more less

Perhaps your wort was too hot when you transferred from the kettle, or while cleaning you dropped the FermZilla against something sharp that punched a hole, or maybe it's just time to replace the tank after acquiring too many scratches from normal wear-and-tear. Whatever the reason, no need to go buy a whole new FermZilla! Just pick up one of these fresh replacement tanks and your conical fermenter will be good as new! Pressure Stress If you use the FermZilla to ferment under pressure, or you use CO2 to pressure transfer or force carbonate your finished beer, it is very important that you conduct semi-annual inspections of your tank. Even with perfect care, the FermZilla tank may show signs of wear from pressure stress over time. We recommend visually inspecting your tank for stress creases or other signs of wear once or twice a year. A hydro test should be conducted every two years, even if no signs of wear are found. The process is simple: Fill the tank to the brim with water Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher Pressurize the tank to 4 BAR (58 psi) Check for leaks, then replace the Red PRV when finished If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla. General Care Taking good care of your FermZilla begins with cleaning and sanitizing the unit before and after use. The tank is made from food-grade PET, which is beautifully clear, but can be sensitive to long soaks in cleaners and acid-based sanitizers. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank.     KegLand Part Number: KL15219 NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.  

Read more less

Stainless steel tri-clamp reducing elbow. Specifically manufactured as an alternative for the FermZilla 27L and 55L Tri-Conical bottom dump port. If you would like to bypass the 3" x 2" butterfly valve and collection container on your FermZilla Tri-Conical, you can use this reducing elbow to go directly to a 1.5" tri-clamp valve. KegLand Part Number: KL29469

Read more less

Replacement black PCO1881 cap for the FermZilla lid. This is the solid cap. For the replacement cap with airlock hole and grommet, see here.  

Read more less