Take Your BrewZilla to the Next Level

• 

  BrewZilla Whirlpool Arm

  41 reviews

  Stop stirring your wort with a spoon and allow the BrewZilla's internal pump to do the work with this new Whirlpool Arm accessory. Fits all sizes of BrewZilla. The whirlpool arm fits onto the existing recirculation pipe with a stainless steel male camlock fitting. The BrewZilla's internal magnetic pump will aid in circulating your wort for better hop extraction in the whirlpool stage, as well as help collect the hot break into the center of the false bottom. Whirlpooling while cooling with the immersion heat exchanger will also speed up chilling times. Specifications: 304 Stainless Steel Fitted Male Camlock fitting Soft Safety Grip Length 520mm (20.5")   Kegland Part Number: KL14199

  Read more less

  $21.99

• 

  BrewZilla Neoprene Jacket | 35L | Gen 3.1.1 & Older | DigiBoil Compatible | Improves Heating Times | Reduces Heat Loss | Removable for Faster Chilling

  75 reviews

  Add this neoprene jacket to your BrewZilla or DigiBoil to speed up heating! Heating is 10% faster and heat loss from the boiler is reduced by 50% Remove the jacket after the boil to speed up chilling Thick, insulating neoprene is secured to the boiler body with a sewn-on hook and loop fastener strap Add some insulation to your BrewZilla or DigiBoil to get better boils! This jacket will fit all 35 L sizes and help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling. This jacket will fit Gen 3.1.1 and older BrewZilla models. It is not compatible with Gen 4 BrewZillas. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 35L Brewzilla and DigiBoil Left cut out for the valve Right cut out for the bottom handle Made from thick neoprene, which is easy to wash after use Kegland Part Number: KL04831  

  Read more less

  $27.49

• 

  BrewZilla Wort Chiller Connection Kit

  11 reviews

  The wort chiller that is included with the BrewZilla comes with bare ends and no tubing. This simple kit has everything you'll need to use the wort chiller right out of the box. Includes 2x 10-foot lengths of 1/2" ID vinyl tubing, female garden hose adapter with 1/2" barb, and 3 hose clamps to secure your connections. If purchasing this item along with a BrewZilla, use code ZILLAKIT at checkout to get the kit for free!

  Read more less

  $24.49

• 

  Polycarbonate Sight Glass for 35L & 65L BrewZilla | Gen 3

  32 reviews

  The BrewZilla Polycarbonate Sight Glass comes assembled with stepless clamps and fits both the 35L and 65L units. This piece is installed in place of the stainless recirculation tube and allows you to check your fill level or watch your wort clarify during mash recirculation. Intended for use with BrewZilla model 3.1.1 or earlier. Not compatible with the Gen 4 BrewZilla. Support brackets on older models may be too small for the 0.59" OD polycarbonate tube. Includes: Stainless 1/2" Male BSP threaded post with o-rings Stainless 1/2" Female BSP threaded post with o-rings 360 mm long polycarbonate tube (13 mm ID x 15 mm OD) Please note: you may need to use varying amounts of plumber's tape to get it to seal in the right position once it has been tightened back down on the female bottom end. Warning: if using PBW, it is recommended to not have an extended contact time at temperatures above 120°F or exceeding the recommended dilution ratio.   KegLand Part Number: KL17114  

  Read more less

  $14.49

• 

  Little Red Spitfire | Low Volume CIP Spinning Spray Rotor for BrewZilla | Only Requires 3 GPM Flow Rate!

  5 reviews

  Clean-in-place your BrewZilla by using the built-in low volume pump Recirculate brewery wash and let the CIP Spray Rotor do the work! Only requires a 6W pump to spin the rotating head and get full effectiveness Easily adapted for use to clean fermenters and other vessels Finally! A CIP spray head designed specifically for use with smaller homebrew pumps. There are a lot of stainless steel CIP Spray Balls readily available for homebrewers but they require a fairly beefy pump to spin the head and make it effective. The new Low Volume CIP Spray Rotor can provide full spray coverage with as little flow rate as 3 gallons per minute. This makes cleaning your BrewZilla an absolute breeze by simply recirculating cleaning chemicals and letting the CIP Rotor spray down the inside of your brewery. Also a great option for brewers using the MKII Magnetic Drive Pump as the spray head can easily be adapted to clean all sorts of fermenters. What Can it Do? Clean-in-place your 35L, 65L or 100L BrewZilla. Simply cut your recirculation hosing, or purchase additional silicone hosing to get the right length for your setup. You will be able to find the optimum length required by testing with water first. We found great success using the glass lid to start with to see if it is coating everything that you need it to. Recommended for low voltage pumps as low as 6W up to 25W (roughly 3–5 GPM). If using a more powerful pump, you may need to throttle back the flow rate so you don't overpower the spray rotor. Includes: Custom molded rotating spray head with 1/2" BSP thread 11.8" (300mm) length of silicone tubing suitable for your BrewZilla recirculation arm Stainless nut and barb Please note: The rotating spray head can only be used in the downwards position, it cannot be tilted or mounted sideways or upside down. KegLand Part Number: KL04329

  Read more less

  $16.49

• 

  BrewZilla Neoprene Jacket | 65L | Gen 3.1.1 & Older | DigiBoil Compatible | Improves Heating Times | Reduces Heat Loss | Removable for Faster Chilling

  9 reviews

  Add this neoprene jacket to your BrewZilla or DigiBoil to speed up heating! Heating is 10% faster and heat loss from the boiler is reduced by 50% Remove the jacket after the boil to speed up chilling Thick, insulating neoprene is secured to the boiler body with a sewn-on hook and loop fastener strap Add some insulation to your BrewZilla or DigiBoil to get better boils! This jacket will fit all 65 L sizes and help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling. This jacket will fit Gen 3.1.1 and older BrewZilla models. It is not compatible with Gen 4 BrewZillas. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 65L Brewzilla and DigiBoil Left cut out for the valve Right cut out for the bottom handle Made from thick neoprene, which is easy to wash after use Kegland Part Number: KL08921

  Read more less

  $32.99

• 

  RAPT Bluetooth Thermometer | BrewZilla Gen 4 | RAPT Portal Compatible | Backlit Digital Display

  2 reviews

  Make your Gen 4 BrewZilla even smarter by pairing it with the RAPT Bluetooth Thermometer Take mash temp readings from the top and bottom of your grain bed simultaneously Set a temperature diffential between the readings to enable the BrewZilla RAPT controller to more accurately maintain temps and perform mash steps Monitor coolant water temps during distillation runs and set alarms to alert you if the temperature is too high Automatically log brew days with detailed information to your RAPT Portal account Huge temperature range from -4°F to 572°F is easy to read on the backlit digital display Orange backing plate can clip to the rim of your BrewZilla and is also magnetic AAA batteries included This low energy, RAPT-enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZilla, RAPT Temperature Controller, and RAPT Fermentation Chamber. It will not work without one or more of these devices. By receiving multiple BLE (Bluetooth Low Energy) thermometer sensors, the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillation process. For example, the BLE thermometer probe can be put into the middle of the malt pipe so the BrewZilla can more accurately control elements switching on/off to achieve a core malt pipe temperature, or the thermometer can be placed into your coolant water during distillation runs so you get an alarm if the temperature is too high. RAPT Connectivity The new Bluetooth thermometer can connect up to your BrewZilla Gen 4, RAPT Temperature Controller, or RAPT Fermentation Chamber and log that temperature data and manipulate fermentation/brewing and distillation profiles in the RAPT Portal. This greatly reduces the need for handwritten records of your brew day as it's all done automatically. The RAPT portal also allows you to see every brew you have done in the past with logged temperatures from the main unit's probe and this digital thermometer. This unit can also be set up to send push notifications to your mobile phone of when it's time to begin sparging or begin other steps in your brewing process. Along with this ease of access and control, the RAPT BrewZilla will also allow you to fully customize your brew day with profiles specifically tuned to your style of brewing or your recipe. For example, you could set up step mash profiles using the core temperature of your mash instead of the cavity below where the BrewZilla's main temp probe is located. Greater accuracy for a more repeatable recipe that results in much better beer! Specifications: Temp Range: -4°F – 572°F (-20°C – 300°C) Probe Length: 8" (20 cm) Note that the probe tip is very sharp Remove black plastic tip before use Plastic tip should be used for storage to avoid punctures / injury Cable Length: 39" (100 cm) Magnetized Backing Plate (Orange) 2 x AAA Batteries (included) KegLand Part Number: KL24334 RAPT Bluetooth Thermometer | User Guide

  Read more less

  $49.99

• 

  KegLand Sergeant Sparge Head | Wort Speader & Aerator

  2 reviews

  Spread recirculating wort evenly during mashing Transfer sparge water into your mash tun without disturbing the grain bed Aerate wort transferring from kettle to fermenter Designed to fit through the hole of the BrewZilla glass lid The KegLand Sergeant Sparge Head is a super simple device designed to help spread and distribute your wort in a mash tun. It can also be used as the final transfer piece between kettle and fermenter to assist in aerating your wort prior to pitching your yeast. It is also designed to fit through the BrewZilla's glass lid or distillation lid so you can recirculate evenly over your mash by adjusting the pumps flow rate. Specifications: 1/2" Thread 2" Long x 3/4" Wide Stainless Steel Barb w/ 1/2" Stainless Steel Retaining Nut KegLand Part Number: KL33640

  Read more less

  $10.99

• 

  BrewZilla Neoprene Jacket | 35L | Gen 4 | Sparge Arm Sleeve | Improves Heating Times | Reduces Heat Loss | Removable for Faster Chilling

  5 reviews

  Add this neoprene jacket to your Gen 4 BrewZilla to speed up heating! Heating is 10% faster and heat loss from the boiler is reduced by 50% Remove the jacket after the boil to speed up chilling Thick, insulating neoprene is secured to the boiler body with a sewn-on hook and loop fastener strap Sparge arm sleeve included to reduce heat loss during mash recirculation Add some insulation to your BrewZilla to get better boils! This neoprene jacket will help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling. Also includes a neoprene sleeve for the recirculation arm to reduce heat loss during the mash. This jacket will fit Gen 4 BrewZilla models. It is not compatible with older generations of BrewZillas and DigiBoils due to where the cutouts on the jacket are located. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 35L BrewZilla Gen 4 Made from 8 mm thick neoprene which is easy to wash after use KegLand Part Number: KL24365  

  Read more less

  $27.49

• 

  Replacement Malt Pipe Boiler Screen for 35L BrewZilla | Gen 3

  15 reviews

  Replacement Malt Pipe Boiler Screen for 35L BrewZilla. Pull ring assembly included. For Gen 3 and older BrewZillas.

  Read more less

  $25.49

• 

  BrewZilla Heat Exchanger Dish | HED | Gen 4 | 35L

  3 reviews

  Reduce heating time during your mash with the Gen 4 BrewZilla Redistribute recirculating wort for longer heating element exposure Improve heat distribution throughout the mash Speed up heating times with the Heat Exchanger Dish (HED) for Gen 4 BrewZillas. This optional upgrade accessory redirects the flow of wort so that it spends more time exposed to the heating elements before reaching the center drain at the bottom of the kettle and being recirculated. Due to the concave bottom and central draining hole on the Gen 4 BrewZilla, recirculating wort will pass through the malt pipe and then down through the boiler false bottom following the path of least resistance. This can cause wort to make a B-line for the drainage hole and reduce the wort's exposure to the unit's heating elements. With the HED installed, wort will be directed to the edge of the BrewZilla base and pass over the elements for a longer period and reduce the time needed to heat to your set temperature. For use with the Gen 4 35L BrewZilla. It is not compatible with any previous generations of BrewZillas or DigiBoils. The HED has been pressed into a slight concave shape to match the curvature of the boiler false bottom. Includes a longer eye bolt assembly than the one included with the false bottom. NOTE: The order of bolt to washer to nuts goes as follows. Eye bolt, washer, false bottom, washer, nut, HED, then wing nut. This is so that the eye bolt does not come completely removed when and if you clean underneath the Heat Exchanger Dish. KegLand Part Number: KL29353

  Read more less

  $27.49

• 

  Stainless Flexi Arm | Flexible Recirculation Arm for BrewZilla | 31.5" Long | 1/2" Hex Nut

  Swap out the standard BrewZilla recirculation arm with this flexible upgrade Perfectly position your recirculating wort or sparge water over the grain bed Use the BrewZilla's built-in pump to easily transfer wort to fermenter or clean the kettle with a CIP head This simple upgrade for the BrewZilla is perfect for positioning your recirculating wort or sparge water over the grain bed and makes it even easier to use the unit's built-in pump for transferring wort to your fermenter or for CIP at the end of the brew day. Pairs perfectly with the Sergeant Sparge Head for mashing and sparging, as well as the BrewZilla Spinning Spray Rotor to clean your kettle. Please note: Camlocks sold separately. You will need a Male Camlock x 1/2" Male Thread adapter in order to attach the Flexi Arm to your BrewZilla recirculation piping. Specifications: 304 Stainless Steel Fitted Female 1/2" Hex Nut Ends Silicone Washers Included Length 31.5" KegLand Part Number: KL15097

  Read more less

  $10.99

• 

  Boiler Extension Kit | BrewZilla | DigiBoil | 35L | 9.25G

  5 reviews

  Ever wanted to punch out a few more gallons of wort with your 35L BrewZilla? Maybe you wanted more strike water for a super sticky batch. Maybe you get boil overs a lot and would like a bit of extra protection. Now there's a solution! The all new 35L BrewZilla Boiler Extension adds 3.1 gallons of headroom. Turn that 9.2G BrewZilla or DigiMash system into a 12.3G behemoth! The extension kit is also great for distilling! Extend the height of your pot still by attaching one or more boiler extensions. For distillation, we recommend upgrading to the Adjustable Lid Clamps which allow you to dial in the tension for a better seal. If you're struggling to get an airtight seal when using the Distillation Lid, these clamps can help provide more tension. Compatible with Gen 3 / Gen 4 BrewZillas. Please Note: The 110V unit may struggle to bring 10+ gallons of wort to boil. Expect longer heating times and a more gentle boil. An insulating jacket is highly recommended if using the 110V model. You Might Also Need: 35L Extended Malt Pipe 35L Wire Support Ring Recirculation Arm Extension KegLand Part Number: KL22231

  Read more less

  $54.99

• 

  BrewZilla Neoprene Jacket | 65L | Gen 4 | Sparge Arm Sleeve | Improves Heating Times | Reduces Heat Loss | Removable for Faster Chilling

  3 reviews

  Add this neoprene jacket to your Gen 4 BrewZilla to speed up heating! Heating is 10% faster and heat loss from the boiler is reduced by 50% Remove the jacket after the boil to speed up chilling Thick, insulating neoprene is secured to the boiler body with a sewn-on hook and loop fastener strap Sparge arm sleeve included to reduce heat loss during mash recirculation Add some insulation to your BrewZilla to get better boils! This neoprene jacket will help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling. Also includes a neoprene sleeve for the recirculation arm to reduce heat loss during the mash. This jacket will fit Gen 4 BrewZilla models. It is not compatible with older generations of BrewZillas and DigiBoils due to where the cutouts on the jacket are located. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 65L BrewZilla Gen 4 Made from 8 mm thick neoprene which is easy to wash after use KegLand Part Number: KL24372  

  Read more less

  $32.99

• 

  35L Distillation Lid Replacement Gasket | 3mm

  5 reviews

  Replacement 3mm thick gasket for the 35L Distillation Lid. Note: The 3mm gasket works well with Gen 3 and older BrewZillas and Gen 1 DigiBoils. If you have a newer model, we recommend the 6mm Gasket for a better seal. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. KegLand Part Number: KL03490

  Read more less

  $8.79

• 

  Replacement Recirculation Arm for 35L BrewZilla

  4 reviews

  Replacement Recirculation Arm for 35L BrewZilla.   KegLand Part Number: KL05937

  Read more less

  $25.49

• 

  Replacement Glass Lid for 35L BrewZilla

  2 reviews

  Replacement Glass Lid for 35L BrewZilla. Handles are not included.

  Read more less

  $25.49

• 

  Recirculation Arm Extension for Boiler Extension | BrewZilla | DigiBoil

  This arm extension allows you to continue using the BrewZilla's recirculation arm after adding a boiler extension kit. Compatible with both 35L and 65L models. Compatible with Gen 3 / Gen 4 BrewZillas. KegLand Part Number: KL26413

  Read more less

  $32.99

• 

  Boiler Extension Kit | BrewZilla | DigiBoil | 65L | 17.1G

  3 reviews

  Ever wanted to punch out a few more gallons of wort with your 65L BrewZilla? Maybe you wanted more strike water for a super sticky batch. Maybe you get boil overs a lot and would like a bit of extra protection. Now there's a solution! The all new 65L BrewZilla Boiler Extension adds 6.3 gallons of headroom. Turn that 17G BrewZilla or DigiMash system into a 23G behemoth! The extension kit is also great for distilling! Extend the height of your pot still by attaching one or more boiler extensions. For distillation, we recommend upgrading to the Adjustable Lid Clamps which allow you to dial in the tension for a better seal. If you're struggling to get an airtight seal when using the Distillation Lid or Steam Condenser Set, these clamps can help provide more tension. Compatible with Gen 3 / Gen 4 BrewZillas. You Might Also Need: 65L Extended Malt Pipe 65L Wire Support Ring Recirculation Arm Extension KegLand Part Number: KL22248

  Read more less

  $65.99

• 

  BrewZilla Lift-N-Lock Pulley System

  3 reviews

  For all-in-one brewers and BIAB brewers, lifting the grains from your vessel can be daunting task. Give your back a rest and use the Lift-N-Lock pulley system to effortlessly lift up your grain bag or malt pipe and while your sweet wort drains into the kettle. This heavy-duty pulley is made from strong nylon strapping, laser cut 304 grade stainless steel and is capable of lifting large heavy loads with ease. It's the perfect pulley for lifting the heavy malt pipe from your BrewZilla or other all-in-one system, especially when brewing high gravity beers with a massive grain bill. It's a bit more expensive than other pulley systems, but there's no comparison when it comes to easily lifting or lowering the malt pipe. The included strap is 10m long by 25mm wide (32.8 ft. x 1 in.). The pulley system enables you to multiply your pulling force by 4 times. If you apply 60 lbs of pulling force, the pulley can lift 240 lbs with relative ease. Be sure that the beam you mount the pulley to is rated for the total amount of force being applied i.e. pulling force plus load weight, so for this example 300+ lbs. KegLand Item Number: KL30885

  Read more less

  $76.99

• 

  Replacement Malt Pipe Rod Spacer for 35L BrewZilla

  2 reviews

  Replacement Malt Pipe Rod Spacer for 35L BrewZilla

  Read more less

  $8.79

• 

  BrewZilla Heat Exchanger Dish | HED | Gen 4 | 65L

  Reduce heating time during your mash with the Gen 4 BrewZilla Redistribute recirculating wort for longer heating element exposure Improve heat distribution throughout the mash Speed up heating times with the Heat Exchanger Dish (HED) for Gen 4 BrewZillas. This optional upgrade accessory redirects the flow of wort so that it spends more time exposed to the heating elements before reaching the center drain at the bottom of the kettle and being recirculated. Due to the concave bottom and central draining hole on the Gen 4 BrewZilla, recirculating wort will pass through the malt pipe and then down through the boiler false bottom following the path of least resistance. This can cause wort to make a B-line for the drainage hole and reduce the wort's exposure to the unit's heating elements. With the HED installed, wort will be directed to the edge of the BrewZilla base and pass over the elements for a longer period and reduce the time needed to heat to your set temperature. For use with the Gen 4 65L BrewZilla. It is not compatible with any previous generations of BrewZillas or DigiBoils. The HED has been pressed into a slight concave shape to match the curvature of the boiler false bottom. Includes a longer eye bolt assembly than the one included with the false bottom. NOTE: The order of bolt to washer to nuts goes as follows. Eye bolt, washer, false bottom, washer, nut, HED, then wing nut. This is so that the eye bolt does not come completely removed when and if you clean underneath the Heat Exchanger Dish. KegLand Part Number: KL29360

  Read more less

  $32.99

• 

  Steam Condenser Set | 2 in. T.C. | BrewZilla | DigiBoil

  Get to boil faster and increase boil vigor by retaining heat! Manage steam by turning it back into liquid that can later be used for cleaning/sanitizing Avoid the sticky residue that boiling wort can leave on your walls and ceiling Reduce the power consumption during the boil with your BrewZilla or DigiBoil Perfect accessory for indoor brewers! No need to install a special Range Hood to manage steam Made with the apartment and basement brewer in mind, this steam condenser set made from high quality 304 stainless steel will help you manage steam and condensation during the boil. Assembles in minutes and can be used with the BrewZilla or DigiBoil with the proper Distillation Lid and 2" T.C. weldless bulkhead. This setup will reduce heat loss, meaning you'll get to boil faster and use less energy overall to maintain a rolling boil. When it's time to add hops, yeast nutrients, or other additions, simply remove the tri-clamp end cap and drop them in. (Use gloves, it will be hot!). With the new Pro Sight Glass Distillation Lid, the condenser can be attached directly to the 35L unit's 2" T.C. ferrule or to the 65L unit's 4" T.C. ferrule using a 4" x 2" T.C. reducer. The Pro Distillation Lid also features a 3" sight glass disc that can be removed to address foaming issues or to add hops or other boil additions. If you've brewed indoors before, you're probably familiar with how sticky the evaporation coming off the boiling wort can be. The gummy layer of film it can leave behind on your painted walls and ceiling is no fun to clean up. And if you've been considering how to incorporate a range hood in your brewery to deal with the steam, now there's no need! Simply attach the Steam Condenser Set and run your kitchen tap or garden hose to the Duotight-compatible inlet. From the inlet, water will enter the column via a special spray head which can condense 0.42 gal (1.6 L) per minute while connected to 100 psi mains water. You'll find that a super-fast flow rate isn't necessary to cool boiling steam into liquid. Unlike the distillation process where the distillate needs to be under a certain temperature so that ethanol doesn't evaporate from the liquid at a high rate, with boiling wort you just need enough flow to form the steam back into liquid. Simple! After the steam is reformed into liquid, it will drain out of the bottom barb where you can install 3/8" ID silicone tubing. Recapture that water in a collection vessel and save it for cleaning and sanitizing! Once again, be aware that the water coming out will be very hot. Caution: You will need to remove the Steam Condenser when you reach boil to manage the hot break and ensure you don't have a boil over when you reach boiling temperatures. Once you've completed that step, you can reattach the Condenser and leave it in place for the remainder of the boil. Warning: It is important that the output tube for this steam condenser is open to atmosphere. This will allow the condensed steam to exit freely. DO NOT put a valve on the liquid output or restrict the condensed steam in any way as this may cause your brewery to develop vacuum and implode or explode. DO NOT immerse the tube for the condensed steam in water. The outlet hose must be open to atmosphere and the drips of condensed steam must drip into your collection bucket freely. You Will Also Need: Tri-Clamp Distillation Lid OR Standard Distillation Lid for 35L or 65L BrewZilla / DigiBoil With 2" T.C. Weldless Bulkhead (H707) OR Pro Distillation Lid for 35L or 65L BrewZilla / DigiBoil 35L Lid connects directly 65L Lid requires 4" x 2" TC Reducer 6.35 mm Monotight Adapter (or you can clamp directly to the inlet) 3/8" ID silicone tubing for the outlet Heat resistant brewing gloves Kit Includes: 5 x 2" Tri-Clamps 5 x 2" Tri-Clamp Silicone Seals 1 x 13.7" (340 mm) Long 2" T.C. Tee 1 x 7.8" (200 mm) Wide 2" T.C. Tee 1 x 2" T.C. End Cap 1 x 2" T.C. to 6.35 mm Duotight elbow cap with elongated spray head mister 1 x 2" T.C. x 0.47" (12 mm) Barb – Suitable for 3/8" (10 mm) ID Silicone tubing Some of these fittings are not sold separately NOTE: The kit does not include the Duotight adapter and garden hose QD shown in the example photo. The text in the photo showing the Duotight compatible inlet elbow states 6.5 mm; it is actually 6.35 mm. KegLand Part Number: KL22842

  Read more less

  $186.99

• 

  Replacement Gasket for BrewZilla / DigiBoil Ball Valve

  1 review

  Replacement silicone gasket for the BrewZilla / DigiBoil ball valve (AG474).

  Read more less

  $2.09

• 

  BrewZilla | DigiBoil | Adjustable Lid Clamps | Stainless Steel | Set of 4

  Adjust clamp tension as needed for a better seal with metal BrewZilla or DigiBoil accessories If you're struggling to get an airtight seal when using the Distillation Lid or Steam Condenser Set, these clamps can help provide more tension Easily spin to adjust clamp height and then tighten hex nuts to lock in adjustment Compatible with 35L / 65L BrewZillas and DigiBoils Made from 304 Stainless Steel Get the exact tension you need with your BrewZilla or DigiBoil with KegLand's Stainless Steel Adjustable Clamp Set. Permanently replace the standard lid clamps and adjust the tension to your needs. These clamps are only intended for use with the metal Distillation Lid or Boiler Extension Kits. If you are having trouble getting the correct tension to form a good seal with those accessories, these adjustable clamps can help you dial in the fit. They should never be used with the standard glass lid. Compatible with 35L and 65L BrewZillas (Gen 3 / Gen 4), DigiBoils (Gen 1 / Gen 2), and Boiler Extensions. Installation Instructions: You will need a pair of bolt cutters or tin snips to cut the standard clamp off. (Please see product photos for optimum cut location). Remove the nut and bolt and thread it through the clamp. Ensure that the grooved part is facing outwards (photo for reference). If you do not have the grooved part facing outwards, the clamp will be blocked by the round lip of the boiler. Loosen the bolts and spin the clamp up or down to adjust the tension. Use the nuts to lock the desired tension. It is always best to start looser than you think, then adjust tighter. Warning: Do not use the adjustable clamps with a glass lid, the clamps are only designed for distillation lids or other metal accessories. Please note: The adjustable clamps will eventually phase out the standard lid clamps on all Gen 4 BrewZillas. They are not necessary when brewing with the standard glass lid. You should only swap to the adjustable clamps if you are using the metal distillation lid or boiler extensions and are having issues with getting the correct tension when using those accessories. KegLand Part Number: KL30649

  Read more less

  $13.49

• 

  BrewZilla PPSU Sight Glass Upgrade Kit

  2 reviews

  Upgrade Gen 3 and Gen 4 BrewZillas with a clear sight glass to monitor volume levels throughout your brewing process Replaces the solid metal recirculation pipe so you can check volume levels even while the malt pipe is draining The PPSU sight glass now comes standard on Gen 4.1 BrewZillas *Requires measuring, cutting, and assembly* This upgrade kit is suitable for BrewZilla Gen 3 and Gen 4 breweries. This will enable you to see the liquid level through the incredibly strong and crack resistant PPSU sight glass. This can be quite handy when you're sparging to a known level as the malt pipe would normally be sitting on top of the halo ring making it difficult to see the liquid level from the indentation markings inside the BrewZilla. Assembly Required: You will also need plumbers tape or food grade Loctite for the female camlock x female 1/2" fitting that comes on the BrewZilla's recirculation arm. The BrewZilla's camlock fitting is reused in the assembly of the sight glass, do not dispose of it prematurely. Please note: This kit includes a one size fits all sight glass for multiple models and sizes. You will need to cut down the 39" PPSU tube to fit your specific model of BrewZilla depending on the length of the recirculation arm. We recommend purchasing the Pipe Cutter to cut the tube cleanly. See the video below showing you how to measure and install this on a BrewZilla. Includes: Brewzilla Sight Glass PPSU Tube - 39.3" (100cm) Sight Glass Connection Kit (Ball valve & Elbow) Sight Glass Graduation Sticker for 35L, 65L or 100L

  Read more less

  $43.99

• 

  Heavy Duty Dolly Bundle | Flat Dolly | 35L & 65L BrewZilla Gen 4

  2 reviews

  Effortlessly transport your 35L or 65L BrewZilla or 65L DigiBoil with the sturdy rolling flat dolly, designed with precut hole configurations for secure placement Includes two locking wheels to hold your brewing system in place, ideal for cleaning on sloped surfaces or ensuring stability during use Perfect for Lift-N-Lock Pulley systems, enabling seamless movement under pulleys and convenient handling of malt pipes Easily move your BrewZilla or DigiBoil around your brewing area using this rolling flat dolly. The thick reinforced plastic dolly plate comes with two precut hole configurations suitable for 35L & 65L Gen 4 BrewZillas and 65L DigiBoils, allowing the feet of your system to slot into place for easy mobility. Two locking wheels are included so you can lock your brewery in place which can be especially useful if you move the unit to a sloped driveway for cleaning. These dollies are highly recommended if you are using a Lift-N-Lock Pulley type system for your malt pipe. Easily move your system into position under your pulley, and when you're done mashing, pull the malt pipe out, wheel the BrewZilla away, and lower the malt pipe to the ground or into a cleaning tub. The Heavy Duty Dolly Bundle is highly recommended for 65L BrewZillas and outdoor brewers that have uneven surfaces. If you're using the 35L unit and looking for a less expensive alternative, check out the Low Profile BrewZilla Dolly Bundle. Compatible With: 35L BrewZilla Gen 4 65L BrewZilla Gen 4 65L DigiBoil Includes: Reinforced Plastic Dolly Plate 100 mm Castor Wheels (2 locking, 2 non-locking) Mounting Hardware Plate Dimensions: 21.6" Ø x 0.7" Thick (550 mm x 20 mm) BrewZilla sold separately KegLand Part Number: KB11089 NOTE: Unfortunately due to the feet placement, the dolly plate is not suitable for the 35L Gen 3.1.1 BrewZilla or 35L DigiBoil

  Read more less

  $109.99

• 

  KegLand Handy Clamp for BrewZilla | Tubing Clamp | 4" Long

  1 review

  Secure silicone hose to your mash tun during recirculation Large circular center of the clamp leaves room for tubing without pinching Excellent chemical resistance to common brewing cleaners and sanitizers Able to withstand boiling temperatures This handy spring clamp features a heavy-duty muslin spring which ensures your silicone hose never accidentally pops out of your mash tun and spills your precious nectar over your brewery floor. The large circular space between the arms of the clamp is perfect for passing 1/2" silicone tubing through without pinching. Rounded handles for a comfortable grip and a PE end grip to ensure your hosing is kept secure. Made from Polypropylene and Polyethylene which have good chemical resistance so it will stand up to the task for use around common brewing cleaners and sanitizers. Temperature Rating: 32-248°F KegLand Part Number: KL24686

  Read more less

  $3.99

• 

  Replacement Malt Pipe Handle for 35L BrewZilla

  1 review

  Replacement Malt Pipe Handle for 35L BrewZilla KegLand Supplier Number: KL29506

  Read more less

  $9.89

• 

  BrewZilla | Replacement Silicone Tubing Kit | Gen 4 | 35L

  This is a complete replacement silicone tubing kit for the pump and ball valve tubing on a 35L Gen 4 BrewZilla. Made from food grade silicone and temperature resistant to 356°F (180°C). KegLand Part Number: KL27731

  Read more less

  $10.99

• 

  Pro Sight Glass Distillation Lid | Steam Condenser Lid | BrewZilla | DigiBoil | 35L

  Heavy-duty stainless steel lid can be used with a still top or steam condenser Sight glass disc allows you to watch your boil without having to remove your still or condenser Easily remove the disc during the hot break or to add hops or other boil additions Molded grips for easier handling with the lid is still hot Compatible with 35L BrewZillas and DigiBoils If you're using an AlcoEngine Still Top or Steam Condenser Set with your BrewZilla or DigiBoil, this heavy-duty stainless lid with sight glass is virtually a must-have. Whether distilling or brewing, keeping an eye on your boil will help you stop foaming or boil over issues before they happen. With the standard distillation lid, checking on your wash or wort means removing or tipping the apparatus over to get a peek inside the boiler, which can be a cumbersome (if not dangerous) part of your process. The PPSU sight glass disc can also be easily removed to add hops or other boil additions through the large 3" T.C. ferrule. (Use gloves, it will be hot!) The sight glass disc is made from a special PPSU plastic—an excellent choice for components that are exposed to high temperatures (up to 392°F / 200°C) and corrosive media due to its exceptional chemical resistance, as well as being extremely impact resistant. KegLand decided to use this type of plastic because it also has superior thermal and mechanical properties with the added benefit of being transparent. Intricate parts can be injection molded that would have been near impossible to do with stainless steel or lab-grade glass. For use with an AlcoEngine Still Top, you will also need this single sided bead seal. Installing AlcoEngine Still: Remove the bottom nut and seal from the column Place the single sided bead seal on the lid's tri-clamp ferrule (beaded side facing down) Pass the threaded bottom section of the column through the ferrule Secure in place with a 2" tri-clamp The column's bottom nut and seal are not needed Specs: 2" T.C. top ferrule port 3" T.C. sight glass ferrule Lid handles with molded grips Thicker silicone lid gasket for a tighter seal Includes: 3" PPSU sight glass disc 3" tri-clamp 3" silicone tri-clamp gasket Silicone lid gasket KegLand Part Number: KL25812

  Read more less

  $164.99

• 

  Replacement Wire Malt Pipe Support for 35L BrewZilla

  Replacement Wire Malt Pipe Support for 35L BrewZilla. Made from 304 stainless steel. This is the "Gen 2" version of the wire support ring. It has been slightly modified from the previous version to be compatible with all generations of BrewZillas and DigiBoils. KegLand Part Number: KL88020

  Read more less

  $14.49

• 

  Replacement Glass Lid for 65L BrewZilla

  2 reviews

  Replacement Glass Lid for 65L BrewZilla. Handles are not included.

  Read more less

  $25.49

• 

  Replacement Malt Pipe Bottom Screen for 35L BrewZilla | Gen 4

  1 review

  If you are an experienced single vessel brewer and don't use the overflow pipe. This malt pipe screen is the perfect upgrade for just that! The Gen 4 BrewZilla nixed the overflow pipe, so this is a direct replacement part for that unit. But this screen can also be used with the Gen 3 BrewZilla if you don't use the overflow pipe. KegLand Part Number: KL14236

  Read more less

  $27.49

• 

  AlcoEngine Copper Pot Still Top w/ Barb Connections

  17 reviews

  The Copper Pot Still is perfect when you want the flavor of the wash to come through, whereas a Reflux Still is more favorable for producing pure, unflavored spirits. If you want to make whiskeys and gins, this pot still top is a great way to start! The classic "V" shape captures the vital esters, aldehydes, and phenolic compounds that are necessary for the complex spirits such as whiskeys and gins. Made from solid copper. When your hot spirit comes into contact with the copper, the copper acts like a catalytic converter to drive sulfur out of the spirit. This leads to less off-flavors and higher quality spirit. This is only the still top and does not come with a boiler. This is only the still top and does not come with a boiler. Combine with a distillation lid to use a BrewZilla or DigiBoil as the base for this Alcoengine brand still top. Comes with 13 mm (0.51") barb connections for the water inlet and outlet. Kegland Part number: KL1615

  Read more less

  $159.99

• 

  Replacement Tube for BrewZilla Sight Polycarbonate Sight Glass

  1 review

  Replacement tube only for BrewZilla Polycarbonate Sight Glass. Fittings are not included. 15.25" long. 5/8" OD  

  Read more less

  $7.69

• 

  BrewZilla | High Temperature Magnetic Drive Pump | 25 Watt | Replacement Pump for 65L & 100L | Gen 4 | 220V

  This pump does not have a plug. It comes with the appropriate connectors to wire it to the BrewZilla's circuit board. For a brewery pump with similar performance, please see the MKII Pump. This pump now comes standard on the 65L BrewZilla, but if you have an older Gen 4 model with the original 6W pump, you can upgrade to this more powerful unit. The Green Demon This pump comes standard with the 100L BrewZilla Gen 4 and the upgraded 65L BrewZilla Gen 4.1. To upgrade older 65L BrewZilla Gen 4 models with the smaller pump, you will need to perform some light electrical terminal rewiring. This pump comes fitted with blade and circle connectors to swap out the standard 6W pump. You will need to re-use the grommet fitting so be gentle when taking it off the 6W pump. Standard Configuration – No additional fittings/hoses required This configuration is a direct swap out of the 6w pump to the 25w pump. Utilizing the tee splitter and the original hosing that comes with the 65L Gen 4 BrewZilla. It does help a little bit if you use the outlet elbow piece on the inlet, and vice versa as the 25w pump is slightly taller than the 6w stock standard pump. Alternative Configuration – Oli's Hail Mary For this method you will need about 6.5" of 1/2" ID hosing, preferably braided silicone. You cannot use normal silicone hosing for this. This method does not use the tee piece or ball valve. It solely relies on the bigger 25W pump to do all of the transferring and recirculating needs. Please see product photos for configuration types. Specifications: Voltage: 220-240V at 50-60hz Max Head: 11.1 ft Max Flow: 5 gal Wiring: Fork and Ring Connectors fitted with insulation sheath Fittings: 1/2" (13 mm) barbs NOTE: Like almost all centrifugal pumps, do not run this pump dry. KegLand Part Number: KL25126

  Read more less

  $74.99

• 

  Replacement SS Immersion Chiller for 35L BrewZilla

  2 reviews

  This is the stainless steel immersion chiller that comes with the 35 L BrewZilla. Also suitable for use with the 35L DigiBoil. Use with D1710 1/2" ID beverage tubing.

  Read more less

  $71.99

• 

  Replacement O-Ring for BrewZilla / DigiBoil Ball Valve

  Replacement o-ring for BrewZilla / DigiBoil ball valve (AG474).

  Read more less

  $2.09

• 

  Distillation Lid for 35L BrewZilla / DigiBoil | 6mm Gasket

  13 reviews

  Use this lid along with the 35L BrewZilla or DigiBoil and a copper still top (DS120or DS130) to make your own easy-to-use distillery. This lid has a 1.85" (47mm) hole for the still top. Lid gasket included. Note: This lid uses a 6mm gasket to better fit the Gen 4 BrewZilla and Gen 2 DigiBoil. It is also backwards compatible with Gen 3 and older BrewZillas and Gen 1 DigiBoils. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. Made from 304 stainless steel Measures 12.25" in diameter. Kegland Part number: KL03483

  Read more less

  $38.49

• 

  AlcoEngine Copper Reflux Still Top w/ Barb Connections

  1 review

  The Copper Reflux Still Condenser is designed to create high percentage pure neutral spirit. It features a flow management device, which makes it extremely easy to use. No need to worry about fine tuning the water flow speed. As long as your providing enough coolant or cold water running through the condenser, the flow rate doesn't matter. The purity of the spirit can be controlled by two included flow control inserts. These brass inserts come with a 1.0mm hole and 0.6mm hole. As the hole gets smaller, the rate at which the spirit exits the condenser will decrease, thus increasing your reflux ratio and the purity of your spirit. If you want to make whiskeys and gins we recommend checking out the Copper Pot Still! This is only the still top and does not come with a boiler. Combine with a distillation lid to use a BrewZilla or DigiBoil as the base for this Alcoengine brand still top. Comes with 13 mm (0.51") barb connections for the water inlet and outlet. Kegland Part number: KL16162

  Read more less

  $169.99

• 

  Extended Malt Pipe for Boiler Extension | BrewZilla | DigiBoil | 35L | 9.25G

  For use with the 35L BrewZilla Boiler Extension Kit. It does not come with an extra Wire Malt Pipe Support Ring. If you're using the extended malt pipe with the 35L DigiBoil, you will need to purchase the ring separately. If you're using the malt pipe with the 35L BrewZilla you can either move your ring up to the boiler extension, or buy an additional ring so you can remove the malt pipe in two steps. You will also need the Ricirculation Arm Extension to continue using the BrewZilla's recirculation arm. Compatible with Gen 3 / Gen 4 BrewZillas. KegLand Part Number: KL26468

  Read more less

  $82.99

• 

  Pro Sight Glass Distillation Lid | Steam Condenser Lid | BrewZilla | DigiBoil | 65L

  Heavy-duty stainless steel lid can be used with a still top or steam condenser Sight glass disc allows you to watch your boil without having to remove your still or condenser Easily remove the disc during the hot break or to add hops or other boil additions Molded grips for easier handling with the lid is still hot Compatible with 65L BrewZillas and DigiBoils If you're using an AlcoEngine Still Top or Steam Condenser set with your BrewZilla or DigiBoil, this heavy-duty stainless lid with sight glass is virtually a must-have. Whether distilling or brewing, keeping an eye on your boil will help you stop foaming or boil over issues before they happen. With the standard distillation lid, checking on your wash or wort means removing or tipping the apparatus over to get a peek inside the boiler, which can be a cumbersome (if not dangerous) part of your process. The PPSU sight glass disc can also be easily removed to add hops or other boil additions through the large 3" T.C. ferrule. (Use gloves, it will be hot!) The 65L lid is designed to be extremely sturdy when using heavier stills and is made with a 4" T.C. ferrule top port. To pair the lid with an AlcoEngine Still Top or the BrewZilla Steam Condenser Set, you can use a 2" x 4" T.C. reducer. (The AlcoEngine Still Tops will also need this single sided bead seal for a secure tri-clamp connection.) The sight glass disc is made from a special PPSU plastic—an excellent choice for components that are exposed to high temperatures (up to 392°F / 200°C) and corrosive media due to its exceptional chemical resistance, as well as being extremely impact resistant. KegLand decided to use this type of plastic because it also has superior thermal and mechanical properties with the added benefit of being transparent. Intricate parts can be injection molded that would have been near impossible to do with stainless steel or lab-grade glass. Specs: 4" T.C. top ferrule port 3" T.C. sight glass ferrule Lid handles with molded grips Thicker silicone lid gasket for a tighter seal Includes: 3" PPSU sight glass disc 3" tri-clamp 3" silicone tri-clamp gasket Silicone lid gasket KegLand Part Number: KL25829

  Read more less

  $219.99

• 

  Replacement Wire Malt Pipe Support for 65L BrewZilla

  Replacement Wire Malt Pipe Support for 65L BrewZilla. Made from 304 stainless steel. KegLand Part Number: KL09553

  Read more less

  $14.49

• 

  Replacement BrewZilla Upper Extension Rod for Overflow Malt Pipe

  Replacement upper overflow malt pipe attachment with tension spring. Compatible with 35L & 65L Gen 3.1 BrewZillas. KegLand Part Number: KL05920  

  Read more less

  $12.49

• 

  Replacement Pull Ring Assembly for BrewZilla False Bottom | Gen 3

  Replacement Pull Ring Assembly for BrewZilla False Bottom - 35L & 65L (Gen 3). KegLand Part Number: KL13642

  Read more less

  $4.39

• 

  Replacement Right Angle Silicone Elbow Bend for BrewZilla | Gen 3 | Gen 4

  This is a replacement silicone elbow bend for 35L or 65L BrewZillas. Compatible with Gen 3 and Gen 4. This part joins the pump to the inlet on the base of the BrewZilla then to the outlet of the pump to the recirculation arm on the side of the BrewZilla. Made from food grade silicone. Temperature resistant to 356°F (180°C). KegLand Part Number: KL06293

  Read more less

  $8.79

• 

  Replacement Malt Pipe Top Screen for 35L BrewZilla | Gen 3.1.1 | No Overflow Hole

  Replacement malt pipe top screen for 35L BrewZilla. Does not include gasket, which was discontinued and is not required after Gen 3.0. KegLand Part Number: KL05524

  Read more less

  $25.49

Show more products