Bottling Beer

Bringing a 6-pack to the party is great, but nothing increases your social clout like showing up with a growler freshly filled with your latest creation. Keep a growler or two on hand for the next time you transport your homebrew or slide down to the local brewpub for a refill. Sold individually or in a case of 6. Bottle Specifications: Capacity: 64 fl Oz.  Weight: 2.43 lb Height: 10.94 inches Outside Diameter: 4.97 inches Not for pasteurization. For refill use only. Please Note: Caps are not included. See related products below for options. 

Read more less

Save time and remove the guesswork on bottling day with Pop Shots Carbonation Tablets! No need to measure out and mix corn sugar to make a priming sugar solution Simply add the recommended number of sugar tablets based on the volume of your bottle One bag is enough to carbonate 5 gallons of bottled beer Make bottling day a breeze and add Pop Shots to your 12 oz, 16 oz, or 22 oz bottles to make carbonation easy! Tested in-house, our Pop Shots are formulated to ensure your beverage achieves carbonation. After adding your Pop Shots, please store your bottle at room temperature for 1-2 weeks to allow carbonation to take place. Dosage: 12 oz Bottles - 3 Pop Shots 16 oz Bottles - 4 Pop Shots 22 oz Bottles - 5 Pop Shots Approximately 175 Pop Shots per bag.

Read more less

Possibly the smallest keg you can make that will fit a corny-style keg lid. This half gallon ball lock keg works perfectly as a pressurizable growler that doesn't require any special fittings or accessories beyond the ball lock draft equipment you probably already own. If you've been considering a permanent soda water line on your draft system, this is the ideal keg to use with the KegLand Continuous Soda Carbonator Keg Lid. The low volume of this corny keg will allow the Carbonator Keg Lid to almost instantly carbonate water as it refills the keg after every pour. This little guy also works great as a line cleaning keg using a small batch of cleaning solution. 5.9" W x 9.9" H KegLand Part Number: KL20893  

Read more less

No capper required! Make your bottling day easier by skipping the capping step all together The perfect bottle for a wide range of homemade beverages including beer, cider, mead, kombucha, and more! Pressure rated to 100 PSI which means they can easily handle the carbonation of soda pop and hard seltzer E.Z.Cap is the authentic North American swing-top glass bottle manufacturer The included Swing Top closure is reusable and can be replaced as needed These swing top bottles are a revolution in Beer Bottling!  The convenience of a swing top, hybridized with the storage capabilities of a standard crown cap; Meet the EZ Cap Bottle.  These swing tops are designed to be primarily sealed with a crown cap closure for long term storage.  Once you crack your brew for consumption however, you have the swing top in place to close it back up if need be!  Whether you're too distracted with other fine brews to taste, or just need to wait your turn at the beer pong table, this is a perfect system for you. Bottles rated to 100 PSI. Case of 12 x 16 oz Amber EZ Cap swing top bottles and 12 Swing Tops.  Crown Caps not included (see recommended items below for options).

Read more less

Bottle washers make clean up and bottle maintenance much easier to deal with!  Using one of our bottle washers is definitely the fastest way to clean bottles and carboys. Works great on build up!   Our stainless bottle washer creates a jet-style stream that penetrates build-up in bottles or carboys. It is automatically activated when a bottle is pressed down onto the unit. Female hose thread connection.

Read more less

The Bottle Tower features a rotating base and convenient drain port. Comes standard with 5 inserts for a total of 45 seats. With added inserts the bottle tree can hold as many as 90 bottles at a time. Easily assembles and breaks down for storage. With a 3/8" OD drain outlet on the base, you can attach tubing so the base automatically drains to a nearby sink. The Monster Cleaner (B526) can be attached to the top insert for a complete cleaning and drying station. Please note the example photos show extra inserts added to the bottle tree. The 45-seat tree comes standard with 5 inserts. We do not recommend using more than 10 inserts (B528) per Bottle Tower. You can install a hose if you wish to drain it directly to a sink (5/16” ID hose) Top of the bottle drainer will take our Monster Cleaner with no adapter required. PET carboys and FerMonsters™ could be placed on top to drain them. Rotational base BPA free. Made with food grade materials    

Read more less

Plastic screw caps for growlers and wine jugs. Standard 38 mm size (38/400 thread) for growlers, 1/2 gallon, 1 gallon, and 4 Liter wine jugs. White color with foam liner.

Read more less

The Monster Cleaner injector easily sanitizes a wide range of bottles and other vessels. Clean beer bottles, wine bottles, and growlers. And with the adapter piece in place, you can use the Monster Cleaner with glass jugs, hydrometer jars, racking canes, siphons, and graduated cylinders. Easy to assemble and a breeze to use and clean. It also acts as a versatile addition to the top of the Bottle Tower (B527) with no adapter required. May also be used independently on any flat surface. Included adapter for use with any container up to 55 mm (2.1") in neck diameter Works with a wide range of bottles including PET beer bottles, wine bottles, and champagne bottles Conveniently fits on top of The Bottle Tower with no adapter required 50% more sanitizer capacity than competing models Size is perfect to sanitize Growlers and Gallon Jugs Flexible base (basin) made with high impact materials to stand drops up to 12 feet in height Made with food grade materials BPA free  

Read more less

Makes managing sanitized bottles for a whole batch easy, and lets you get the bottling mess out of the kitchen--no more using the dishwasher rack to hold sanitized bottles. The Rotating Bottle Tree holds 45 bottles. It will simplify the bottling process. Just rinse the bottles out well after use and store upside down on the bottle tree where they remain clean. When you want to bottle, use the optional Sanitized Injector (B520) to spray sanitizing solution, such as Star San or SaniClean, into the bottles to sanitize. Wait 1 minute and bottle. You can also do the sanitizing ahead of time and let the bottles air dry upside down. Made by Ferrari Group in Italy.

Read more less

Completely impervious to oxygen and sunlight and made from 304 stainless steel, this growler is one of the best storage options for beer. This growler comes with a double wall vacuum insulation keeping your delicious beer cold for hours. The spring wired lid makes this growler capable of holding up to 30 psi. This is a smokin deal when compared to other double wall growlers.   Dimensions: 4.75 in. Diameter x 12 in. Height; Holds 2L or  67 oz Draft Kit is out now! Kegland Part number: KL04282

Read more less

Easily connects the Bottle & Carboy Washer (CE10) to most kitchen sink faucets. Stainless steel construction.   Comes with two washers. For outside threaded faucets use adapter with only one washer; for inside threaded spout use both washers. Simply unscrew the screen assembly at the end of your faucet and screw the adapter in place.   Bottle & Carboy Washer sold separately.  

Read more less

Replacement gaskets for the EZ Cap bottles. 12 gaskets per order.

Read more less

This simple drain tube will keep the mess to a minimum when using the Tapcooler Counter Pressure Bottle Filler! Attaches directly to the Tapcooler's PRV so overfill beer and foam can drain out to a bucket or nearby sink. Measuring 39" long, the end of the tube can be placed in a growler or other receptacle so you can keep filling bottles without spillage!  

Read more less

Keep these replacement rubber washers on hand to ensure you always have a perfect seal.   When you're bottling, you don't want to be caught without spare washers for your swing top bottles. Whether your current washers are old and cracked, or you just can't quite get a perfect seal, these replacement washers will have you covered. 

Read more less

This 11-inch extension tube that hooks directly into an Intertap beer faucet! If you're draft setup features Intertap or Nukatap forward-sealing faucets, this extension tube will offer more flexibility and range when bottling with the Tapcooler Counter Pressure Bottle Filler! This extension tube has an Intertap/Nukatap faucet adapter that screws directly into the faucet on one end, and the other end hooks up to the Tapcooler unit so you can have a range of motion for bottling away from the faucet. A small silicone o-ring is provided to seal the connection between the filler unit and the connection hose. Attachments are made from Stainless Steel and connected by food grade beverage tubing. Tapcooler and faucet not included.  

Read more less

Give your homebrew that final touch: A six pack carrier that you can customize!   With this white 6 Pack Carrier for glass bottles, you can give your homebrew a professional presentation. Simply create your own custom graphics and logo, then present it to your amazed family and friends! A great idea for gifts.    White, for 12 oz bottles.

Read more less

12-seat 2-in-1 Bottle Washer compatible with popular beer, wine, and PET bottles when paired with the appropriate bottle tray Garden hose adapter included to easily rinse bottles or purge them of oxygen with the Gas Purging Adapter Stack up to 4 trays of matching bottles while drying The Vintage Shop has been a pioneer in the manufacturing of products for the home wine and beer industry since 1969 Pair with either the Glass Bottle Tray or PET Bottle Tray (sold separately) Cleans dozens of bottles quickly! Imagine a system that lets you sanitize bottles 12 at a time, temporarily store them while they drain upside down, and then flush them with inert gas prior to filling. This bottle rinsing base and rack system is your dream come true! The base portion of the system connects to a water supply for rinsing or to your inert gas system for purging/flushing. In our ideal plan you have two bases. One is used for rinsing, the other, sitting right next to it, is used for purging. You can put the rinsing base in a tub that is re-circulating with sanitizing solution (such as: CL27) or just drain to the ground if you are working outside. *Note: Bottle Racks are sold separately. You will need to buy as many racks (CE971) as needed. Each rack holds 12 bottles. Comes with a female garden hose fitting attached to a plastic 1/2" barb fitting on the unit.   12.25" L x 10.75" W x 3" H Max Temp: 167° F (75° C)

Read more less

The newest wing capper on the market is the Kelly, made by the Ferrari Group in Italy.  We love this capper because it is easy to use, has a smooth capping action, a magnet in the capping head to hold crown caps, and solid metal jaws to firmly grasp the bottle. Sized for standard 26 mm crown caps.

Read more less

Bottle directly from your ball lock or pin lock keg with this optional Tapcooler accessory. Features a 1/4" swivel nut at one end to connect to a flared disconnect (not included) and a ball valve at the other. Simply remove the faucet fitting on the Tapcooler filler, attach the valve end, attach a ball lock or pin lock disconnect into the included swivel nut set on the tubing, and hook up to your keg. The valve acts as the beer faucet normally would, starting and stopping flow directly from the keg. The attached tubing is 6.5 feet long, giving you plenty of versatility in your bottling range. Another great accessory from Tapcooler! Tapcooler and ball lock disconnect not included.  

Read more less

12-seat bottle tray designed for glass beer & wine bottles to be used with The Vintage Shop 2-in-1 Bottle Washer Use with the 2-in-1 Bottle Washer to rinse bottles or purge them of oxygen with the Gas Purging Adapter Stack up to 4 trays of matching bottles while drying Swing top bottles will fit after removing the wire swing top The Vintage Shop has been a pioneer in the manufacturing of products for the home wine and beer industry since 1969 Fits most sink sizes and popular glass bottles Please also read description for CE970 as this is a two part kit. An awesome way to have your bottles ready to go! This rack will have your bottling session running smoothly, with as little handling as necessary.  Load up to 12 bottles upside down at one time. These racks then sit down on the base to either rinse or gas flush the bottles, depending on what you have hooked up to the base (water or inert gas.) Will hold a wide variety of bottles. Swing top bottles will fit if wire swing top is removed. 15.25" L x 11" W x 4 5/8" H Max Temp: 167° F (75° C)

Read more less

Ferrari Deluxe bench capper with adjustable spring loaded head. Head can be easily moved by pressing the black button on the side and sliding the capping mechanism up or down. Also referred to as Ferrari Delux or Super Agata.

Read more less

Unlike standard low-end bottle fillers, the Vintage Shop's springless model uses a plastic valve instead of a spring to seal. The springs are not made from a food grade quality metal. Fillers will work with 12 or 22oz bottles. Use with 1/2" tubing. Larger 1/2" diameter and increased flow is good for wine applications.

Read more less

No capper required! Make your bottling day easier by skipping the capping step all together The perfect bottle for a wide range of homemade beverages including beer, cider, mead, kombucha, and more! Pressure rated to 100 PSI which means they can easily handle the carbonation of soda pop and hard seltzer Pop Cultures is helping people experience the joy and satisfaction of making and sharing homemade creations Swing top closures are included, reusable, and can be replaced as needed PopTops™ Swing Top Bottles from Pop Cultures provide the best of both worlds when it comes to bottling! They provide the ease and flexibility of flip top bottles, with the added ability to cap for shelf stability.  These attractive and robust bottles are ideal for whatever beverage tickles your fancy. Whether you got hooch, booch or beer, it's all good in here. No capper or additional equipment required when using the swing tops. Resealable, reusable and recyclable (though you will never want to get rid of these bottles!). Bottles rated to 100 PSI. Case of 12 x 16 oz Clear Pop Tops Bottles with Swing Tops.  Crown Caps not included (see recommended items below for options).

Read more less

32 fl oz amber 'growlette'. You will also need a 38 mm screw top, which is not included. 38mm is the same finish as most standard screw top growlers. Sold individually or in a case of 12.

Read more less

No capper required! Make your bottling day easier by skipping the capping step all together The perfect bottle for a wide range of homemade beverages including beer, cider, mead, kombucha, and more! Pressure rated to 100 PSI which means they can easily handle the carbonation of soda pop and hard seltzer E.Z.Cap is the authentic North American swing-top glass bottle manufacturer The included Swing Top closure is reusable and can be replaced as needed A revolution in Beer Bottling!  The convenience of a swing top, hybridized with the storage capabilities of a standard crown cap; Meet the EZ Cap Bottle.  These swing tops are designed to be primarily sealed with a crown cap closure for long term storage.  Once you crack your brew for consumption however, you have the swing top in place to close it back up if need be!  Whether you're too distracted with other fine brews to taste, or just need to wait your turn at the beer pong table, this is a perfect system for you.  Bottles rated to 100 PSI. Case of 12 x 16 oz Flint (Clear) EZ Cap Bottles and 12 Swing Tops.  Crown Caps not included (see recommended items below for options).

Read more less

PopTops™ Swing Top Bottles from Pop Cultures provide the best of both worlds when it comes to bottling! They provide the ease and flexibility of flip top bottles, with the added ability to cap for shelf stability.  These attractive and robust bottles are ideal for whatever beverage tickles your fancy. Whether you got hooch, booch or beer, it's all good in here. No capper or additional equipment required when using the swing tops. Resealable, reusable and recyclable (though you will never want to get rid of these bottles!). Bottles rated to 100 PSI. Case of 12 x 16 oz Amber Pop Tops Bottles with Swing Tops.  Crown Caps not included (see recommended items below for options).  

Read more less

No capper required! Make your bottling day easier by skipping the capping step all together The perfect bottle for a wide range of homemade beverages including beer, cider, mead, kombucha, and more! Pressure rated to 100 PSI which means they can easily handle the carbonation of soda pop and hard seltzer Pop Cultures is helping people experience the joy and satisfaction of making and sharing homemade creations Swing top closures are included, reusable, and can be replaced as needed PopTops™ Swing Top Bottles from Pop Cultures provide the best of both worlds when it comes to bottling! They provide the ease and flexibility of flip top bottles, with the added ability to cap for shelf stability.  These attractive and robust bottles are ideal for whatever beverage tickles your fancy. Whether you got hooch, booch or beer, it's all good in here. No capper or additional equipment required when using the swing tops. Resealable, reusable and recyclable (though you will never want to get rid of these bottles!). Bottles rated to 100 PSI. Case of 12 x 16 oz Amber Pop Tops Bottles with Swing Tops.  Crown Caps not included (see recommended items below for options).

Read more less

No capper required! Make your bottling day easier by skipping the capping step all together The perfect bottle for a wide range of homemade beverages including beer, cider, mead, kombucha, and more! Pressure rated to 100 PSI which means they can easily handle the carbonation of soda pop and hard seltzer E.Z.Cap is the authentic North American swing-top glass bottle manufacturer The included Swing Top closure is reusable and can be replaced as needed These swing top bottles are a revolution in beer bottling!  The convenience of a swing top, hybridized with the storage capabilities of a standard crown cap; Meet the EZ Cap Bottle.  These swing tops are designed to be primarily sealed with a crown cap closure for long term storage.  Once you crack your brew for consumption however, you have the swing top in place to close it back up if need be!  Whether you're too distracted with other fine brews to taste, or just need to wait your turn at the beer pong table, this is a perfect system for you.  Bottles rated to 100 PSI. Case of 12 x 32 oz Flint (Clear) EZ Cap Bottles and 12 Swing Tops.  Crown Caps not included (see recommended items below for options).

Read more less

With the FastWasher bottle washer you can clean and sanitize your bottles with ease! Simply place your bottles on the rack, lower the Fast Washer into a tub of sanitizer or clean water, turn it on and it does the rest! The FastWasher uses a 530 GPH submersible pump to shoot water or sanitizer up the neck of the bottle to make contact with the entire interior surface. The FastWasher holds 12 bottles at a time. Perfect for use with 22 oz "Bomber" beer bottles or 750 ml wine bottles. Also compatible with 12 oz and swing top bottles. Due to the presence of water, we highly recommend using a GFCI outlet adapter with the FastWasher. Check out the E100 below under "You Might Also Need". The FastWasher is meant to be used alongside the FastRack Bottle Drying Rack & Storage System. The FastWasher does not include the bottle rack pictured on the box. If you do not have the FastRack, you can purchase the bottle rack piece separately (B535R). The FastWasher requires a tub to operate correctly, which is not included. The recommended tub size is 20" x 16" x 8" or larger.

Read more less

Connects your new Counter-Pressure filler to your existing ball lock kegging system with a convenient, sealing quick-disconnect system. Having everything you need all in this kit makes set-up & use of your counter-pressure filler easier. If you have the Counter-Pressure bottle filler then this set is a must have!   Includes: Hardware to connect filler to gas system: Gas line tee, quick disconnect set, 6' of gas line.   Hardware to connect filler to keg: Threaded, black Beverage-Out Quick Disconnect, related flare fittings, 5' of beer line.   To Install: Shut off your gas. Cut your existing gas line assembly and clamp the Co2 Tee in that place. Clamp the gas line and beverage line to the Bottle Filler. Gas line on the larger barb fitting, beverage on the smaller barb. Make sure the counter pressure filler is closed by placing the valve handle perpendicular to the valve. Attach the beverage ball lock quick disconnect to your keg. Never attach a beverage out fitting to your keg without it being in a closed system. Connect the gas line quick disconnect. Finally turn your gas back on. You're ready to fill.

Read more less

Metal champagne wires for securing champagne stoppers and corks. To use, first insert plastic or cork champagne stopper. Set a champagne wire on top, grasp the protruging metal loop, and twist to secure.  

Read more less

Swap out the 26 mm capping bell with this 29 mm bell to make the Colt Strong bench capper (B506) compatible with European style bottles that require larger caps.

Read more less

This plastic spigot has an adjustable spout which can be rotated 360 degrees and has a thread to fit into your plastic fermenter. It also has a bulkhead so you can use one of these in any type of vessel with a 26 mm hole that you would like to add a spigot to. Great for turning a bucket into a bottling bucket! Comes with spigot, 2 washers and a lock nut. KegLand Part Number: KL01632  

Read more less

Optional tubing extension allows the Tapcooler to be used away from directly under the faucet Three length options to meet your setup needs Comes with fittings, tubing, and o-rings needed to hook it up Fittings are made of stainless steel connected by food grade beverage tubing Give yourself some room to work with the Tapcooler extension tube. Not every draft setup is located at a convenient height or location to counter pressure fill your bottles. With the optional extension tube, you can set up your bottling run up to 6.5 feet away from your beer faucet. One end of the connection hose screws into the top of the filler unit and the other end of the tube is screws into the filler unit's removable tap nozzle insert. Includes two small o-rings to seal the extension line on either end. Features: Tubing (available in 3 different length options) Stainless steel faucet fitting Stainless steel Tapcooler fitting Required o-rings for sealing purposes Comes pre-assembled! Tapcooler and faucet not included Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

Now you can proudly display your homemade beer with your own custom label!   With these unprinted sheets of adhesive labels you can easily create your own custom beer labels. The pre-cut labels come on 8-1/2 x 11"" sheets. You can download printing templates that will define the edges of the labels (as a table) so you can make your custom design fit the label. Once you’ve created your own design you print the labels with either inkjet or laser printer. The special adhesive will stay on while wet and during aging, but can easily be peeled off for reusing bottles. Beer labels come 6 per sheet, 8 sheets per pack, for a total of 48 labels. Blank templates for download: MS Word (.doc) PDF (.pdf)  

Read more less

Perfect for use as a 5-gallon batch beer fermenter or bottling bucket Comes with a pre-drilled hole so you can pair it with the spigot of your choice—see recommended spigots below under "You Might Also Need" Once you've upgraded to a carboy or other fermenter, the bucket will remain a reliable brewing tool for cleaning and sanitizing purposes External volume markers provide a convenient reference point when filling the bucket with water to make cleaner or sanitizer solution A six gallon food grade bucket for fermentation or bottling with a pre drilled hole and external volume markings up to five gallons. This bucket does not include a spigot. Our recommended spigots can be found below under You Might Also Need. To use as a fermenter you will need to pick up the optional lid, spigot, stopper, and an airlock. If you use the bucket for fermentation be sure to use care when cleaning. Do not use any abrasive pads that would scratch. Once you get a scratch in a plastic bucket it is very hard to sanitize.  This is also why we don't recommend storing equipment in a bucket between uses as a fermenter. A hot PBW soak is often a perfect way to clean a bucket, followed by a Star San soak for killing bacteria.  Please Note: Buckets are translucent and do not come with lids Buckets are not designed to hold pressure Lids are not gasketed and so do not always form a perfect, airtight seal. Not intended for long-term storage Food-Grade to 180°F

Read more less