Bottling Beer

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these gold bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.  

Read more less

Traditional Norther American Longneck glass beer bottles Thick amber glass offers better protection against UV rays compared to green or clear glass Two cases of 24 bottles are enough to package a 4.5 gallons of finished beer Rather than labeling, you can color code your homebrew with different colored bottle caps 26mm crown cap finish Traditional 12 oz longneck beer bottles that take standard crown caps (26 mm).  24 bottles per case, with dividers. These bottles are thicker and darker than most other bottles, offering better protection against UV rays and preventing your beer from becoming lightstruck.  These bottles are used by the likes of Stone, Drakes and even the big guys like Anheuser Busch.   The displacement caused by a 3/8" bottle filler (B411) leaves the perfect amount of headspace in your bottle.  Two cases of this classic beer bottle will house a standard 5 gallon batch of homebrew.  Fits all standard (26 mm) pry-off and universal style crown caps. Don't forget your bottle caps. We stock over 10 different colors and styles of crown caps! Skip labelling your bottles by identifying them with colored crown caps. Bottle Specifications: Capacity: 12 fl Oz Weight: 0.425 lb Height: 9 inches Outside Diameter: 2.4 inches Pressure Rating: Up to 3 volumes of carbonation.

Read more less

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these black bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.

Read more less

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these green bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.    

Read more less

Add convenience and reduce the mess of bottling with this bottling wand!   Say goodbye to the days of just running a tube from your bottling bucket's spigot into the bottom of the bottle. A bottling wand starts its flow when you press the wand tip against the bottom of the bottle, and stops when you lower the bottle away from it. No more having to fiddle with the spigot during bottling, and no more mess from the dripping hose between bottles!   What does this bottle filler have that the rest don't? A removable tip and spring that make this model easy to sanitize. Plus, the nozzle spring can be removed if you prefer the action of a springless bottle filler. The actual "wand" on the filler is 12 inches long.   The plastic end fits nicely into our FE346 spigot, or it can be removed to attach 3/8" ID tubing.      

Read more less

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these red bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.    

Read more less

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these white bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.    

Read more less

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these blue bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.    

Read more less

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these orange bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.    

Read more less

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these silver bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.    

Read more less

Traditional Bomber glass beer bottles Perfect for splitting between two drinkers or sampling for a small group (or to simply cut down on bottling time!) Thick amber glass offers better protection against UV rays compared to green or clear glass Two cases of 12 bottles are enough to package just over 4 gallons of finished beer Rather than labeling, you can color code your homebrew with different colored bottle caps Traditional 22 oz longneck beer bottles, often referred to as "beer bomber bottles", take standard crown caps (26 mm).  12 bottles per case, with dividers. These bomber bottles are thicker and darker than most other bottles, offering better protection against UV rays and preventing your beer from becoming lightstruck.  These bottles are used by the likes of Stone, Speakeasy, Drakes, Knee Deep and even Anheuser Busch.   The displacement caused by a 3/8" bottle filler (B411) leaves the perfect amount of headspace in your bottle.  Significantly reduce your bottling time by switching from 12 oz bottles to 22 oz bottles. Two cases of this classic beer bottle will house a standard 5 gallon batch of homebrew (you may need an extra bottle or two if you ended up with a full five gallons).  Fits all standard (26 mm) pry-off and universal style crown caps. Don't forget your bottle caps. We stock over 10 different colors and styles of crown caps! Skip labelling your bottles by identifying them with colored crown caps. Bottle Specifications: Capacity: 22 fl. Oz. Weight: 1 5/8 lb Height: 11 inches Outside Diameter: 2.9 inches Pressure Rating: Up to 3 volumes of carbonation.

Read more less

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these American flag bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.  

Read more less

This Spigot can be easily installed onto any bucket for added convenience.   Drill a 1" hole and install in bucket with the gasket against the exterior of the bucket.    Spigot uses 3/8 in ID tubing.

Read more less

The Tapcooler Counter Pressure Bottle Filler is an all-new, easy-to-use bottling device! Allows you to perfectly bottle beer from a forward-sealing beer faucet without CO2 loss Purge bottles and headspace with CO2 to keep oxygen out, prolonging the life of your beer Perfect for bottling for competitions, sending bottles home with friends, or to take on the go! Easy to setup and super easy clean. For a Duotight-compatible filler, check out the NukaTap Counter Pressure Bottle Filler The Tapcooler Counter Pressure Bottle Filler is the best way to quickly and easily fill bottles of homebrew directly from your draft system. No need to mess with alternate liquid lines or other complex contraptions. Just slide the Tapcooler into any forward sealing faucet (such as a Perlick, Intertap, or Nukatap) hook up a CO2 line, and you're ready to roll. Whether you're filling bottles for a competition or just grabbing a couple to share with your friends, the Tapcooler is quick and easy to use, and will help maintain the flavor, aroma, and carbonation level of your beer so it tastes the same out of the bottle as it would out of the tap. A counter pressure bottle filler is the best tool for bottling, as the bottle is under pressure while the carbonated beer flows in, which results in a minimal loss of the CO2 in solution. The Tapcooler improves upon the standard counter pressure filler, as it plugs directly into your draft faucet. Other counter pressure solutions require you to hook up a separate liquid line, which is not something standard draft systems have setup and requires additional time to prep. With the Tapcooler, you can have it setup and ready to go in less than a minute! The Tapcooler design is also advantageous because after you are done filling the bottle, it stays in place hooked up to your faucet while other fillers require you to set the unit aside and pick it back up again for the next bottle. Connecting your CO2 line is also a snap. You can either hook up directly with a 3/16" push-fit line, or connect your line to the included barb fitting. You can also purchase the gas ball lock adapter (KEG881), which gives you the ability to attach a gas-in disconnect directly to the filler unit. We highly recommend picking up this optional accessory! The Tapcooler is designed to fill beer and CO2 from the bottom of the bottle through the telescoping bottle connection tube. First CO2 flows down into the bottom of the bottle to flush from the bottom up. Next you open the tap and beer flows down the same tube, filling from the bottom up. The result is a more effective purging of oxygen and little to no foam during the filling process. The telescoping bottle connection tube allows you to fill bottles as small as 4.5" tall and up to 12.5" tall. You can fill taller bottles with the Tapcooler, but the tube will not reach the bottom of the bottle, which can lead to some splashing. When filling wide mouth containers, a bottle stopper of suitable size and with a 9 mm hole can be used as an adapter. The filler features a push button CO2 purge valve, which allows you to purge the bottle of oxygen before and after filling. It also includes an adjustable pressure relief valve, giving you the ability to change the filling speed. The pressure relief valve also acts as an overflow port for excess beer or foam to escape when filling. One of the best features of the Tapcooler is that it's super easy to clean. Cleaning other bottle fillers can be a chore and take lots of time. The Tapcooler comes apart easily and allows you to clean all parts effectively and easily after each use. All metal parts that come into contact with your beer are made from 304 stainless steel. The barb and ball lock CO2 adapters are made of aluminum. Finally, the Tapcooler comes chock full of optional accessories that will adapt your filler perfectly to your setup. See the "You Might Also Need" section below for list of accessories! Forward-Sealing Faucet Compatibility Tapcooler fits Intertap, Nukatap, Ultratap, Vent-Matic, and Perlick 600 series faucets. These fillers can be converted to fit Perlick 500 series with the optional tap connector (KEG887). Cannot be used with ventilated beer taps, i.e. non-forward sealing beer taps. Features: Hooks up directly to any forward sealing faucet for quick and easy use. Quick setup and easy maintenance. Perfect for bottling for competitions, sending bottles home with friends, or just to have some bottles on the go! A range of accessories are offered for more range and easier use! Purge bottles with CO2 before and after filling for longer lasting beer! Pressure relief valve allows for control over filling speed and allows excess foam to escape for the perfect pour every time! Made from 304 stainless steel Easy to use and clean!  

Read more less

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these yellow bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.  

Read more less

This capper is perfect for the brewer that is tight on storage space or doesn't feel like hauling out the big floor capper! The Emily hand capper is one of those pieces of equipment that a homebrewer must have.   Made by Ferrari of Italy this is the classic smooth operating, easy to use hand capper. It is made from self-lubricating Nylon and is surprisingly strong. The unique patented design has a gear driven head that makes capping a breeze since less overall force is required. This model is popular with homebrewers for several reasons. It is lighter than metal cappers. It has wider handles making it easier to operate. A built in spring allows the capping mechanism to automatically retract when capping is completed. The built-in magnet allows the cap to be positioned in the capping head and then applied to the bottle rather applying the cap on top of the bottle first.   This is made in Italy and not in China like some other red models sold on the market. We tested the Chinese models and they break more often. The Emily has been sold at MoreBeer! since our start in 1995.   Also caps American sparking wine bottles by removing and reversing the metal jaws. 

Read more less

The first time a brewer tries out the FastRack bottle drying rack system they always say the same thing to themselves: “That is a thing of beauty!”   The FastRack bottle drying rack is the easiest way to drain, stack, and store your empties!  When bottling, use the FastRack to hold your bottles after sanitizing, and have them ready to fill with your delicious homebrew!  The FastRack takes up far less space than a bottle tree. This is a very sturdy system, and even when stacked over 4 levels tall, maintains stability!  Works for standard bottles as well as swing tops.   We sell the Fast Rack components independently, or in a handy combo pack of 1 Tray and 2 Racks.   2 FastRack Racks will hold 48 x 12 oz bottles, a full 5 gallon batch!   Compatible with 12oz bottles only.   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

Belgian or Sparkling style glass beer bottles High pressure rating to withstand highly carbonated sours, Belgian-style beers, or sparkling wine At 16.9 ounces, this is the perfect bottle size to pour a full pint glass Three cases of 12 bottles are enough to package a 4.75 gallons of finished beer 26mm crown cap finish These high quality 500 ml (16.9 oz) Belgian / Champagne style bottles can be capped with standard crown caps (26mm).  Thicker than standard 12 and 22 oz bottles.  Ideal for lambics and other styles that have higher volumes of CO2.  3 Cases will take 4.75 gallons of beer, roughly the amount needed for a 5 gallon batch. Bottle Specifications: Capacity: 500 ml  Weight: 0.88 lb Height: 10.12 inches Outside Diameter: 2.87 inches Pressure Rating: Up to 4 volumes of carbonation.   Shipping Details:​ Case: 12 Bottles Pallet Layer: 16 Cases  Full Pallet: 64 Cases Weight: 11.75 pounds per case Case dimensions: 12"L x 9-3/8"W x 10-5/8"H

Read more less

With this handy adapter, you can easily connect a gas ball lock fitting to your Tapcooler Counter Pressure Bottle Filler! The ball lock adapter inserts into the push fit CO2 connector on the filler unit so that a gray ball lock disconnect can be connected. This is highly recommended accessory for the Tapcooler filler to make bottling quick and easy.  

Read more less

If you have spent uncounted hours washing and sanitizing bottles on bottling day, then you know what a drag that can be. Save time and simplify your life by making this tool a regular part of your bottling process. Simply add some sanitizing solution the the clear dish section of the injector, then place a bottle upside down one the white nozzle and pump it a few times to spray sanitizer inside the bottle. The nozzle provides the correct spray pressure and coverage to fully coat the inside of the bottle in just a few pumps. Able to be installed on top of our Ferrari brand rotating bottle trees (B510 or B517), or used separately on the countertop. It only takes a few minutes to sanitize 2 cases of bottles, letting you get on with bottling and then the rest of your day! Please Note: Does not fit other brand bottle trees or on the Ferrari fixed based tree with handle (B518).

Read more less

Speed up your bottling process with the Deluxe Bench Capper Sturdy, robust, and much easier to operate than handheld bottle cappers Height-adjustable to accommodate 12 oz bottles, 22 oz bombers, and More! Compatible with standard 26mm bottle caps as well as 29mm caps Made in Italy by Grifo Marchetti This bench bottle capper is a workhorse! If you plan on bottling a lot of your homebrew you should consider this sturdy, robust capper.  It is a definite upgrade from all entry level bench cappers. This is one of those pieces of equipment that you will enjoy every time you use it, making it worth every penny.   Made from heavy gauge, enamel coated steel the operation feels smooth and solid. The Deluxe Bench Bottle Capper is definitely the last capper you will buy. This product is vertically adjustable for different bottle sizes, and can cap both 26 and 29 mm bottles.

Read more less

Unlike standard low-end bottle fillers, the Vintage Shop's springless model uses a plastic valve instead of a spring to seal. The springs are not made from a food grade quality metal. Fillers will work with 12 or 22oz bottles. Use with 3/8" tubing.

Read more less

Metal screw caps for beer growlers. Standard 38 mm size (28/400 thread) fits growlers and one gallon jugs. White.

Read more less

This reinforced bench capper is solid, easy to use machine that will last for years of bottling. The base, column, head, and piston are all reinforced to make this capper very sturdy. The Trigger Grip adjustment mechanism makes is easy to change the height to accommodate a variety of bottle sizes. Features: 26 mm steel full cup capping head Weighs 4 lbs 21 1/2" H x 6 7/8" W x 8 5/8" L To use the Colt Strong with European style bottles with 29 mm caps, see B506B.

Read more less

Food Grade PET plastic, re-useable bottles with 28mm reusable screw caps Easy to use. A great alternative to traditional glass bottles as there is no need for a capping tool Lighter than glass so easier and safer to transport Shaped and colored to resemble a traditional style beer bottle. Bottles pressure rated to 28 psi PET beer bottles offer a simpler solution to bottling your homebrew. Skip the labor and frustration of applying bottle caps and simply twist on the included screw caps. Made from food grade PET plastic, these bottles are amber colored and shaped to resemble a traditional beer bottle, but with a larger 16.9 oz capacity. Compared to glass bottles, these PET bottles are much safer to pack and take with you to the beach, the boat, the pool, the disc golf course, or your next backpacking excursion.  The included caps are reusable, but if you prefer to use fresh caps with each bottling run, replacement caps are available. PCO 1881 threaded. Please note: these bottles can be used with the Plastic Carbonation Caps (FE133 / FE146) but are not compatible with the Stainless Carbonation Caps (KG500 / KG502). KegLand Item Number: KL19866

Read more less

No capper required! Make your bottling day easier by skipping the capping step all together The perfect bottle for a wide range of homemade beverages including beer, cider, mead, kombucha, and more! Pressure rated to 100 PSI which means they can easily handle the carbonation of soda pop and hard seltzer E.Z.Cap is the authentic North American swing-top glass bottle manufacturer The included Swing Top closure is reusable and can be replaced as needed A revolution in Beer Bottling!  The convenience of a swing top, hybridized with the storage capabilities of a standard crown cap; Meet the EZ Cap Bottle.  These swing tops are designed to be primarily sealed with a crown cap closure for long term storage.  Once you crack your brew for consumption however, you have the swing top in place to close it back up if need be!  Whether you're too distracted with other fine brews to taste, or just need to wait your turn at the beer pong table, this is a perfect system for you. Bottles rated to 100 PSI. Case of 12 x 32 oz Amber EZ Cap Bottles and 12 Swing Tops.  Crown Caps not included (see recommended items below for options).

Read more less

Give your homebrewed Belgians an authentic finishing touch!    You will love the old world look you get when you seal your Belgian beer bottles with corks and a wire hood. These corks are made specifically for use with Belgian beer bottles. Our corks are brewery-grade. They are also very dense and give a great seal. They work well with our Floor Corker (W410). A hand corker will not work with these corks.    A long-time customer - John Francisco - told us a tip that he uses when he corks his Belgian beers - put a #7 stopper (FE440) over the plunger rod of the corker so that only 1 3/4" of the rod is exposed. This will stop the cork from going into the bottle too far. A wire hood can then be fastened over the remaining 6/8" - 7/8" of cork sticking out of the bottle. We have tried this and it works great!    Attention: These corks come sanitary in the bag ready to be corked into a bottle. Do not sanitize or boil these or you will ruin the integrity of the cork.  1 5/8" L x 1" D 

Read more less

Black Screw Cap for 64oz and 32 oz screw top growlers and jugs.  Featuring a specialized liner that reduces oxygen transfer, this cap will keep your beer fresh and carbonated. 38/400 CT - Fits all standard growlers.  

Read more less

Belgian or Sparkling style glass beer bottles High pressure rating to withstand highly carbonated sours, Belgian-style beers, or sparkling wine 750mL capacity makes them ideal of cellaring your most precious creations Two cases of 12 bottles are enough to package just over 4.5 gallons of finished beer 26mm crown cap finish. Can also be corked using a champagne style cork with cage These high-quality Belgian / Champagne style bottles can be capped with standard crown caps (26mm). Bottle Specifications: Capacity: 750 ml  Weight: 1.5 lb Height: 11.9 inches Outside Diameter: 3.3 inches Pressure Rating: Up to 5.5 volumes of carbonation.

Read more less

Wire hoods are a key part of any Belgian-style bottling. Not only do they complete the look of the bottle, but they are required to keep the mushroom cork in place once the carbonation builds up. Apply them easily with a Wire Hood Fastener giving the hood 5 1/2 turns.

Read more less

The first time a brewer tries out the FastRack system they always say the same thing to themselves: “That is a thing of beauty!”   Because it’s made to hold wine bottles, the FastRack Wine Bottle Drying Rack & Storage System is just the right size for your 22oz beer bottles! It is the cleanest way to drain, stack, and store your empties. When bottling, use the FastRack to hold your bottles after sanitizing, and have them ready at hand to fill with your delicious homebrew!  The FastRack Wine takes up far less space than a bottle tree.   We sell the Fast Rack in a handy combo pack, consisting of 1 Tray and 2 Racks, which is perfect for a 5 gallon batch. We also sell the individual components for larger batches and storing more cases!    Each FastRack Wine Rack holds 12 x 22 oz (or 750 ml) bottles.   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

What does this bottle filler have that the rest don't? A removable tip and spring that make this model easily sanitized. Plus, the spring inside can be removed if you prefer the action of a springless bottle filler. The actual "wand" on the filler is 12 inches long.

Read more less

Save time and remove the guesswork on bottling day with Pop Shots Carbonation Tablets! No need to measure out and mix corn sugar to make a priming sugar solution Simply add the recommended number of sugar tablets based on the volume of your bottle One bag is enough to carbonate 5 gallons of bottled beer Make bottling day a breeze and add Pop Shots to your 12 oz, 16 oz, or 22 oz bottles to make carbonation easy! Tested in-house, our Pop Shots are formulated to ensure your beverage achieves carbonation. After adding your Pop Shots, please store your bottle at room temperature for 1-2 weeks to allow carbonation to take place. Dosage: 12 oz Bottles - 3 Pop Shots 16 oz Bottles - 4 Pop Shots 22 oz Bottles - 5 Pop Shots Approximately 175 Pop Shots per bag.

Read more less

Bringing a 6-pack to the party is great, but nothing increases your social clout like showing up with a growler freshly filled with your latest creation. Keep a growler or two on hand for the next time you transport your homebrew or slide down to the local brewpub for a refill. Sold individually or in a case of 6. Bottle Specifications: Capacity: 64 fl Oz.  Weight: 2.43 lb Height: 10.94 inches Outside Diameter: 4.97 inches Not for pasteurization. For refill use only. Please Note: Caps are not included. See related products below for options. 

Read more less

No capper required! Make your bottling day easier by skipping the capping step all together The perfect bottle for a wide range of homemade beverages including beer, cider, mead, kombucha, and more! Pressure rated to 100 PSI which means they can easily handle the carbonation of soda pop and hard seltzer E.Z.Cap is the authentic North American swing-top glass bottle manufacturer The included Swing Top closure is reusable and can be replaced as needed These swing top bottles are a revolution in Beer Bottling!  The convenience of a swing top, hybridized with the storage capabilities of a standard crown cap; Meet the EZ Cap Bottle.  These swing tops are designed to be primarily sealed with a crown cap closure for long term storage.  Once you crack your brew for consumption however, you have the swing top in place to close it back up if need be!  Whether you're too distracted with other fine brews to taste, or just need to wait your turn at the beer pong table, this is a perfect system for you. Bottles rated to 100 PSI. Case of 12 x 16 oz Amber EZ Cap swing top bottles and 12 Swing Tops.  Crown Caps not included (see recommended items below for options).

Read more less

Bottle washers make clean up and bottle maintenance much easier to deal with!  Using one of our bottle washers is definitely the fastest way to clean bottles and carboys. Works great on build up!   Our stainless bottle washer creates a jet-style stream that penetrates build-up in bottles or carboys. It is automatically activated when a bottle is pressed down onto the unit. Female hose thread connection.

Read more less