Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications
Floating lid can be positioned as needed to match the volume of the liquid you're working with
Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine
Conical-shaped complete drainage bottom for maximum product yield and easy cleaning
Made from 304 stainless steel with ultra-high-quality laser welds
Made in Germany by Speidel
We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage.
Speidel Quality Features:
Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems!
Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms.
Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume.
Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms.
Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted for use with 1.5in TC. Other sizes and custom configurations are available at additional cost upon request. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings.
Rubber Lid Gaskets - Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines!
Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they?ll be around to honor that warranty should the need arise.
Tank Dimensions - 830mm D x 1361mm H (32.6" D x 53.5" H)
Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.
Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Made from 304 stainless steel with ultra-high-quality laser welds 2R rated interior finish resists residue build-up and is easy to clean Air pump with pressure gauge, airlock, and ball valve included Made in Germany by Speidel We are proud to offer our small Variable Volume Tanks from Speidel - a German manufacturer of premium quality stainless steel tanks for the wine industry. The tank body is fabricated from 304-type stainless steel, while the floating lid is made from 316-type stainless and has an inflatable bladder that pumps up to seal the wine off at any volume level. They can be used for primary fermentation as well as aging. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. These tanks arrive to you complete and ready to go out of the box after a little assembly. The tanks are fitted with 1/2 inch threaded ports to accomodate the included 1/2 inch stainless steel ball valve and 1/2 inch stainless plug. The plugged port is intended for use with an optional thermometer (MT514). Also compatible with shielded thermowell for digital temperature controller probes (FE62). Speidel Quality Features: Rubber Lid Gaskets: Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Warranty - Speidel-Behaelter, GmbH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Dimensions - 550mm D x 999mm H (21.6" D x 39.3" H) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.
Process apples, pears, and other non-pitted fruit Stainless steel construction throughout Easily disassembles for cleaning after use Made in Italy by EnoItalia A motorized shredder for use with apples, pears or any other fruit which needs processing before it can be pressed for its juice. Not for use with peaches, cherries or other pitted fruits. To use, fruit is fed into the hopper at the top of the machine, where it falls on to spinner cutter blades which shred the fruit. The mash is then pushed out of the machine and into your waiting bucket where it can then be transferred to the press. Extremely simple to operate, and safe since the cutting blades are buried deep in the machine during operation. Sturdy, all stainless steel construction means that you know this machine will last you for years and years. Simple disassembly for cleaning. Runs on standard 110V power with a 1.5HP Motor. We tested this shredder ourselves and found that because it is only 110V, you have to feed the fruit in slowly and consistently. If you have access to 220V power, we recommend our WE208 crusher, which can hold more fruit at once and crush more fruit per hour.
Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications
Floating lid can be positioned as needed to match the volume of the liquid you're working with
Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine
Made from 304 stainless steel with ultra-high-quality laser welds
2R rated interior finish resists residue build-up and is easy to clean
Air pump with pressure gauge and airlock included
Made in Germany by Speidel
We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage.
Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage.
The tank features a 1.5" tri-clamp bottom port and NW10 upper port with analog thermometer. The upper side port is NW10 male threaded and will accept either a Speidel Sample Valve or Thermowell. This NW10 fitting comes with a stainless steel cap. Either the Sample Valve or the Thermometer can be added at the time of ordering or ordered separately at any point in the future.
Please note: The bottom T.C. port does not come capped. You will also need an end cap, clamp, and gasket if you do not plan to install a valve on the bottom port.
Speidel Quality Features:
Rubber Lid Gaskets - Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines!
Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms.
Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems!
Warranty - Speidel-Behaelter, GmbH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise.
Tank Dimensions - 820mm D x 1328mm H (32.2" D x 52.2" H)
Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.
Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Conical-shaped complete drainage bottom for maximum product yield and easy cleaning Made from 304 stainless steel with ultra-high-quality laser welds Made in Germany by Speidel We are is proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Note: These stock tanks are outfitted with two male threaded fittings which will accept either a Speidel Sample Valve or a Thermowell. One fitting will come capped and the other will come equipped with a thermometer. Speidel Quality Features: Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume. Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms. Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted for use with 1.5in TC. Other sizes and custom configurations are available at additional cost upon request. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings. Rubber Lid Gaskets - Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Dimensions - 630mm D x 1384mm H (24.8" D x 54.48" H) (Lip Ø is 26.378" ) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.
A custom fabricated 304 stainless steel cooling plate for Macro Bins designed specifically for MoreWine!. The plate hangs in place by the inlet/outlet pipes and is held in the center of your bin. 40" wide x 14.5" tall, yields 0.37 square meters of cooling surface. 1/2 inch MPT threaded inlet and outlet.
Please note that the illustration shown is for demonstration purposes only and is not to scale.
Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Made from 304 stainless steel with ultra-high-quality laser welds 2R rated interior finish resists residue build-up and is easy to clean Air pump with pressure gauge, airlock, and ball valve included Made in Germany by Speidel We are proud to offer our small Variable Volume Tanks from Speidel - a German manufacturer of premium quality stainless steel tanks for the wine industry. The tank body is fabricated from 304-type stainless steel, while the floating lid is made from 316-type stainless and has an inflatable bladder that pumps up to seal the wine off at any volume level. They can be used for primary fermentation as well as aging. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. These tanks arrive to you complete and ready to go out of the box after a little assembly. The tanks are fitted with 1/2 inch threaded ports to accomodate the included 1/2 inch stainless steel ball valve and 1/2 inch stainless plug. The plugged port is intended for use with an optional thermometer (MT512). Speidel Quality Features: Rubber Lid Gaskets: Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Warranty - Speidel-Behaelter, GmbH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Dimensions: 440mm D x 765mm H (17.3" D x 30.1" H) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.
Replacement bladder for the 300L & 450L Marchisio Bladder Presses (WE170/WE175).
Please note: the color of the bladder may differ from what's pictured.
Rolling cart wine plate filter
Plates made from food-grade Noryl
Built-in stainless centrifugal pump
Built-in pressure gauge
1.5" tri-clamp inlet/outlet
1,200L/h wine filtering capacity
Made in Italy by Marchisio
Commercial plate filter featuring 41 20cm x 20cm plates. Included 110v 1/2hp, stainless motor will pump wine from your container and push it through the filter and into your aging tank or bottle filler.
Features:
304 Stainless Steel Construction
Four Casters for easy movement. Two of the casters have locks
Built-in centrifugal stainess steel pump with on/off switch.
41 Food-Grade Noryl plastic plates included.
Double filtration kit available
Built-in pressure gauge
Maximum pump pressure is 2.5 bar (35 p.s.i.)
Up to 1200L (317 gal) Flow rate per hour
940x480x590mm/37x19x23 inches
114 lbs
1.5" Tri-Clamp inlet and outlet
Pads should be placed in the machine rough-smooth-smooth-rough
Minimum number of plates that can be used is 30
High-capacity, commercial-grade stainless steel fruit press Bladder press offers an effortless process that is more efficient and gentler on the fruit Can be used with any standard garden hose and water supply that provides at least 36 psi of pressure Rotating basket allows for easy disposal of the pressed grapes Mounted to welded frame with rolling casters for smooth mobility around the winery Made in Italy by Marchisio Bladder presses offer a gentler yet more efficient press with less operator effort and the ultimate in press-control. You will extract more juice and less tannins. Attach a standard garden hose to the included hose fitting. Water fills up the interior rubber bladder which expands and presses the grapes against the outer stainless steel screen. 35 p.s.i water pressure (2.5 bar) is the maximum pressure you would need to operate. Two sleeves are provided with the press. One a mesh sleeve is placed inside the press and the other is an outer plastic sleeve that is placed over the top of the press to keep the pressed fruit from squirting out. After pressing, the entire stainless basket rotates and the inner mesh sleeve can be pulled out with most of the pressed grapes coming with it. We use this press in our own small production. A platform was built for the press to sit on so that when we rotate the basket we can dump directly into a macrobin. Use a Must Pump (PMP565) to pump fermented grapes up into the press. 118 gallon capacity (not including bladder.) Download the PDF FAQ: Can the press be operated with air pressure? No. These are hydraulic presses that may only be operated with water. When operating with compressed air, there is a risk of explosion and a very high risk of injury if the membrane bursts due to excess pressure or damage. Is a minimum water pressure required? In order to ensure the function and the best possible yield, there should be a minimum water pressure of 2-2.5 bar on the press. What if the water supply delivers more than 3 bar? In principle, this is not a problem, as if the water pressure inside the press exceeds 3 bar, the pressure relief valve opens and there is no pressure-related damage. How many apples make how much juice? On average, 50kg (110 lbs) of apples produce around 30-35L (8-9 gal) of juice, depending on the variety and quality of the apples.
Rugged punch down tool at a fantastic price. Exterior 1" diameter 304-type stainless tubing is polished to a mirror finish. Bottom disc is 12" in diameter with four large holes to decrease pressure during punch down.
Features
Polished Finish
12" disc made from 10 gauge thick stainless
Capped/Sealed ends for easy cleaning and sanitizing
Constructed from 304-type stainless steel
Actual weight is 7lbs. Shipping weight is calculated at 70 lbs because these ship at FedEx oversize 2 rates.
72" Height
Rugged punch down tool at a fantastic price. Exterior 1" diameter 304-type stainless tubing is polished to a mirror finish. Bottom disc is 12" in diameter with four large holes to decrease pressure during punch down.
Features
Polished Finish
12" disc made from 10 gauge thick stainless
Capped/Sealed end for easy cleaning and sanitizing
Constructed from 304-type stainless steel
Actual weight is 5lbs. Shipping weight is 30lbs as these ship out as a UPS oversize 1 package.
46" Height
Rolling cart wine plate filter
Plates made from food-grade Noryl
Built-in stainless centrifugal pump
Built-in pressure gauge
1.5" tri-clamp inlet/outlet
600L/h wine filtering capacity
Made in Italy by Marchisio
Small commercial plate filter that will accomodate 20 20cm x 20cm plates. Included 110v 1/2hp, stainless motor will pump wine from your container and push it through the filter and into your aging tank or bottle filler.
Features:
304 Stainless Steel Construction
Four Casters for easy movement. Two of the casters have locks
Built-in centrifugal stainess steel pump with on/off switch
21 Food-Grade Noryl plastic plates included.
Double filtration kit available
Built-in pressure gauge
Maximum pump pressure is 2.5 bar (35 p.s.i.)
Up to 600L (158 gal) Flow rate per hour
620x420x560mm/24x16.5x22 inches
90 lbs
1.5" Tri-Clamp inlet and outlet
Pads should be placed in the machine rough-smooth-smooth-rough
Cooling & heating in one premium quality unit Control fermentation temperatures, cold-stabilize insulated tanks, or heat tanks during cold weather Fill from the exterior without the need to remove covers or panels Program and monitor temperatures via the digital controller Non-Return Kit installed as standard to prevent backflow when positioned below your tank jacket, heat exchanger, or piping system Four locking casters offer ease-of-mobility when moving the unit around the winery 1.8 Ton / 21,840 Btu cooling capacity 230V, 3 Phase power Made in Germany by Kreyer Cooling and Heating in one unit! Every Winemaker can appreciate the benefits of precise temperature control during all stages of production. This mobile unit allows you to easily control your ferment temperatures, heat your tanks during winter to expedite Malo-Lactic fermentation, or cold-stabilize your white wines. This unit can be used as portable unit in a larger winery or as a fixed system supplying a glycol loop in a smaller winery. Unit is used for heating or cooling but cannot supply both at the same time. Manufactured by Kreyer, the World's leading producers of wine-cooling equipment. Note: This unit runs off 230V 3 phase power. It will not run off 208V. Uses: Cooling of must for cold soaks, slow starting ferments Heating up must after a cold soak period Cold Stabilization of tartaric crystals Controlling fermenting temperatures through cooling or heating Maintaining storage temperatures in tanks/barrels Check out these features: Cools or Heats 1.8 Tons (21,840btu) of cooling power .85 Tons of heating power Can cool glycol/water bath down to -10C/14F or up to 42C/107F 230V 60Hz 3 phase supply voltage drawing 13.1 amps Rolls on four locking casters Sheet metal housing, electrolytic galvanized high surface quality, powder-coated and abrasion-resistant casing 7 Gallon Insulated Plastic glycol/water reservoir Easy to fill from outside Evaporator coil made of stainless steel High-quality Grundfos recirculation pump Built in pressure switch shuts down recirculation pump when not needed Digital Thermostat Lifting/Crane Hooks for transport All panels remove for easy access All units pass multiple tests prior to shipment German Engineering Controlled by compact PC boards with a temperature accuracy up to 0.1 degree Celsius. 33"L x 25"W x 31.5"T Unit has 1" Male BSP w/ 3/4" Female BSP inlet / outlet 6 Month Electrical Warranty 1 Year Mechanical Warranty CE Certified Please Note: This unit REQUIRES 230 v Three Phase power and will not function on anything else. Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord. Available in larger sizes. For additional product options View the resource.
Use your existing glycol system to cool your cellar Eliminates the need to purchase an entirely separate refrigeration system MR series fan units offer quieter operation compared to the SD-S units Sized for well-insulated rooms up to 8,750 ft³ Made in Germany by Kreyer Cool your cellar using your existing glycol system. Save energy and money! These units work under the same principles as standard refrigeration but use cooled glycol instead of cooled refrigerant gas, eliminating the need to have a separate refrigeration system. It is a fantastic use of your glycol system for a majority of the year when typically glycol systems are on but are being sporadically called upon. Glycol systems do need to be sized to accommodate both these fan units and peak duty during the crush to be able to accommodate all tasks at once. Glycol from your main glycol chiller is recirculated through these fan units. Aluminum fins act as heat exchangers drawing heat out of your room as the fins are cooled by the glycol. If you have a Kreyer chiller/heater you can even heat a space in cold weather environments. The heat exchangers inside the units are made from corrugated aluminum fins and internally grooved copper tubes. The white ABS casing looks great. Because of its rounded corners it has no water retaining areas favorable to germ development. Units are outfitted with stainless steel screws and show no sharp, cutting edges. Fan Unit Temp Control Upgrades: 1/2 in. Solenoid Valve - Allows or blocks flow of glycol through the fan unit. Needs to be connected to a Controller to function. A filter is recommended to protect the solenoid. 1/2 in. Solenoid Filter- protects the solenoid valve from any particulate or sediment. Glycol Fan Control Unit - Set a specific temperature on this controller and it will open and close the solenoid valve. Solenoid Connection Cable - This 2 meter long cable is required to connect the Solenoid Valve & Control unit. Specifications of MR210: Will cool well insulated spaces up to 8750 cubic feet while drawing 1 Ton of cooling power Triple Fan Unit 220V connection required to run fan You will need to connect to your existing glycol system Inlet and Outlet: 3/4" Male BSP
Use your existing glycol system to cool your cellar Eliminates the need to purchase an entirely separate refrigeration system MR series fan units offer quieter operation compared to the SD-S units Sized for well-insulated rooms up to 3,500 ft³ Made in Germany by Kreyer Cool your cellar using your existing glycol system. Save energy and money! These units work under the same principles as standard refrigeration but use cooled glycol instead of cooled refrigerant gas, eliminating the need to have a separate refrigeration system. It is a fantastic use of your glycol system for a majority of the year when typically glycol systems are on but are being sporadically called upon. Glycol systems do need to be sized to accommodate both these fan units and peak duty during the crush to be able to accommodate all tasks at once. Glycol from your main glycol chiller is recirculated through these fan units. Aluminum fins act as heat exchangers drawing heat out of your room as the fins are cooled by the glycol. If you have a Kreyer chiller/heater you can even heat a space in cold weather environments. The heat exchangers inside the units are made from corrugated aluminum fins and internally grooved copper tubes. The white ABS casing looks great. Because of its rounded corners it has no water retaining areas favorable to germ development. Units are outfitted with stainless steel screws and show no sharp, cutting edges. Fan Unit Temp Control Upgrades: 1/2 in. Solenoid Valve - Allows or blocks flow of glycol through the fan unit. Needs to be connected to a Controller to function. A filter is recommended to protect the solenoid. 1/2 in. Solenoid Filter- protects the solenoid valve from any particulate or sediment. Glycol Fan Control Unit - Set a specific temperature on this controller and it will open and close the solenoid valve. Solenoid Connection Cable - This 2 meter long cable is required to connect the Solenoid Valve & Control unit. Specifications of MR135: Will cool well insulated spaces up to 3500 cubic feet while drawing 2/3 Ton of cooling power Double Fan Unit (pictured is 3 fan unit) 220V connection required to run fan You will need to connect to your existing glycol system Inlet and Outlet 3/4" Male BSP
High-capacity, commercial-grade stainless steel fruit press Bladder press offers an effortless process that is more efficient and gentler on the fruit Can be used with 3/4 hose and water supply that provides at least 36 psi of pressure Rotating basket allows for easy disposal of the pressed grapes Mounted to welded frame with rolling casters for smooth mobility around the winery Made in Italy by Marchisio Bladder presses offer a gentler yet more efficient press with less operator effort and the ultimate in press-control. You will extract more juice and less tannins. Attach your water supply line to the 3/4" barbed water inlet at the base of the unit. Water fills up the interior rubber bladder which expands and presses the grapes against the outer stainless steel screen. 35 p.s.i water pressure (2.5 bar) is the maximum pressure you would need to operate. Two sleeves are provided with the press. One a mesh sleeve is placed inside the press and the other is an outer plastic sleeve that is placed over the top of the press to keep the pressed fruit from squirting out. After pressing, the entire stainless basket rotates and the inner mesh sleeve can be pulled out with most of the pressed grapes coming with it. We use this press in our own small production. A platform was built for the press to sit on so that when we rotate the basket we can dump directly into a macrobin. Use a must pump to pump up into the press. In each press load we do approximately 110 gallons of red wine must (letting free run on through) which works out to be about 3/4 of a macrobin. We can press 7 tons of fruit in a long day. 80 gallon capacity (not including bladder.) 85" Overall height with a basket diameter of 25.5". A great press for the small winery. We used this press in 2004 to press 7 tons of cabernet. A local winery used two of them side by side to press over 50 tons. A joy to use. Download the PDF FAQ: Can the press be operated with air pressure? No. These are hydraulic presses that may only be operated with water. When operating with compressed air, there is a risk of explosion and a very high risk of injury if the membrane bursts due to excess pressure or damage. Is a minimum water pressure required? In order to ensure the function and the best possible yield, there should be a minimum water pressure of 2-2.5 bar on the press. What if the water supply delivers more than 3 bar? In principle, this is not a problem, as if the water pressure inside the press exceeds 3 bar, the pressure relief valve opens and there is no pressure-related damage. How many apples make how much juice? On average, 50kg (110 lbs) of apples produce around 30-35L (8-9 gal) of juice, depending on the variety and quality of the apples.
Ratcheting basket press with wood basket
Classic design offered at an affordable price for home & professional winemakers alike
Made with pressed steel basin with an enamel coating
Wooden basket disassembles into 2 pieces for easy removal of the pressed grapes and cleaning
13-gallon capacity
Made in Italy by Marchisio
MoreWine! presents the classic, affordable wine press for the home user. Wood slats on the side with a painted base and stand. Wood basket presses offer time proven performance at affordable pricing.
Traditional ratchet style presses are made with a pressed steel basin with an enamel coating. The basket staves are made of a hardwood and fastened with chrome plated bolts. Baskets are in 2 pieces for easy disassembly and removal of pomace. Also included are 6 hardwood blocks and two hardwood half-rounds to more efficiently and effectively press grapes and extend the reach of the ratchet. These presses come with a removable shaft which has a large nut on the bottom of the basin. The ratchet mechanism allows you to exert more pressure on the grapes than would be possible with a simple screw mechanism.
The "number" (#) of the press refers to the diameter of the basket in centimeters. There is no direct relationship between the diameter of the basket and the capacity in gallons or the number of pounds of grapes it can hold.
#35 specifications:
Basket diameter: 14 inches
Basket height: 19 inches
Basket capacity: 13 gallons
Ship weight: 101 pounds
Manufacturer: Fratelli Marchisio (Italy)
Ratcheting basket press with wood basket
Classic design offered at an affordable price for home & professional winemakers alike
Made with pressed steel basin with an enamel coating
Wooden basket disassembles into 2 pieces for easy removal of the pressed grapes and cleaning
8-gallon capacity
Made in Italy by Marchisio
MoreWine! presents the classic, affordable wine press for the home user. Wood slats on the side with a painted base and stand. Wood basket presses offer time proven performance at affordable pricing.
Traditional ratchet style presses are made with a pressed steel basin with an enamel coating. The basket staves are made of a hardwood and fastened with chrome plated bolts. Baskets are in 2 pieces for easy disassembly and removal of pomace. Also included are 6 hardwood blocks and two hardwood half-rounds to more efficiently and effectively press grapes and extend the reach of the ratchet. These presses come with a removable shaft which has a large nut on the bottom of the basin. The ratchet mechanism allows you to exert more pressure on the grapes than would be possible with a simple screw mechanism.
The "number" (#) of the press refers to the diameter of the basket in centimeters. There is no direct relationship between the diameter of the basket and the capacity in gallons or the number of pounds of grapes it can hold.
#30 specifications:
Basket diameter: 12 inches
Basket height: 17 inches
Basket capacity: 8 gallons
Ship weight: 78 pounds
Manufacturer: Fratelli Marchisio (Italy)
A unique alternative to cooling plates. This tube-within-a-tube snake is used to recirculate glycol or cooled water through your wine to keep temperatures down. Can be used in a tank, macrobin, or barrel. The inner tube runs through the middle of the outer shell, but is shorter. Glycol can run through one tube and back through the other, completing the loop.
Snakes are outfitted with 1/2in. male NPT threads on both the inlet and outlet. The inlet is at 90 degrees and the outlet is straight.
.25m Square meter of Cooling Surface.
Ideal for use in an Oak Barrel or Small Tank.
Can also be used for heating.
Optional silicone sleeve for sealing.
Cold stabilization in one barrel or control fermentation temperatures in a 100L tank. With an overall length of 20 in. this little snake can be used to control temperatures in any small batch.
You will need a glycol system or at least a cold or hot water source to connect to the snake.
How it works: This tube-within-a-tube snake is used to recirculate glycol or cooled/heated water through your wine to regulated temperatures. The inner vinyl tube runs through the middle of the corrugated stainless tubing, but is shorter than the stainless tubing. Glycol can run through one tube and back through the other, completing the loop.
Use our custom made Snake Bung to make an air tight seal. Slides over the snake and seals it to the barrel or the traditional air lock hole in a variable volume lid (provided the hole is approximately 1 3/4 in. in diameter.) Or punch a 1 3/4in. hole in any tank or lid.
Snakes are outfitted with 1/2in. male NPT threads on both the inlet and outlet. The inlet is at 90 degrees and the outlet is straight.
1 3/8" diameter. 0.11 m² Surface area.
Can also be used for heating
A unique alternative to cooling plates. This tube-within-a-tube snake is used to recirculate glycol or cooled water through your ferment to keep temperatures down. It can be used in a tank, macrobin, or barrel. The inner vinyl tube runs through the middle of the corrugated stainless tubing, but is shorter than the stainless tubing. Glycol can run through one tube and back through the other, completing the loop.
Snakes are outfitted with 1/2in. male NPT threads on both the inlet and outlet. The inlet is at 90 degrees and the outlet is straight.
1.2 Square Meters of Cooling Surface
Can also be used for heating
Optional silicon sleeve available for sealing
A unique alternative to cooling plates. This tube-within-a-tube snake is used to recirculate glycol or cooled water through your ferment to keep temperatures down. It can be used in a tank, macrobin, or barrel. The inner vinyl tube runs through the middle of the corrugated stainless tubing, but is shorter than the stainless tubing. Glycol can run through one tube and back through the other, completing the loop.
Snakes are outfitted with 1/2in. male NPT threads on both the inlet and outlet. The inlet is at 90 degrees and the outlet is straight.
.75 Square Meters of Cooling Surface
Can also be used for heating
Optional silicon sleeve available for sealing
A new & unique alternative to cooling plates. This tube-within-a-tube snake is used to recirculate glycol or cooled water through your ferment to keep temperatures down. It can be used in a tank, macrobin, or barrel. The inner vinyl tube runs through the middle of the corrugated stainless tubing, but is shorter than the stainless tubing. Glycol can run through one tube and back through the other, completing the loop.
Snakes are outfitted with 1/2in. male NPT threads on both the inlet and outlet. The inlet is at 90 degrees and the outlet is straight.
.40m Square meter of Cooling Surface
Ideal for use with an Oak Barrel or Small Tank.
Can also be used for heating.
Optional silicon sleeve for sealing.
Spring-loaded hand-lever for quick and easy operation
Compatible with bottles from 7" to 14" in height
Works with polylam, tin, and aluminum capsules
Made in Italy by Marchisio
Used to spin tin foils onto bottles, our Vertical Spinner features a guide for perfect bottle placement everytime, making it much faster and easier to use than a comparable Horizontal Spinner. Horizontal Spinners can be difficult to use because you have to center each bottle. The included hand-lever lowers the spinner onto the bottle and then springs back into place when released. The spinner height can be adjusted on the stand to accommodate bottles from 7" to 14" tall. 110 V. Works with polylam, tin, and aluminum capsules from 28 - 31 mm Ø, up to 65 mm in length. Unit comes unwired for a 110v plug.
Put one feed line into this filler from your fermenter or barrel and fill three bottles at once. Unit comes included with a Siphon Bulb for conveniently starting a siphon from the holding tank to each filler spout. Each bottle fills independently of one another to allow for staggered filling (take one bottle off as another is filling). Fill is initiated when bottle is placed onto filling spout and set down on the bottle tray. The flow of liquid will stop automatically when the level of liquid in the bottle reaches the liquid level in the reservoir. The bottle will rest upon the bottle tray during filling. Spouts feature a unique design that eliminates dripping when bottle is removed. A float valve keeps the wine level constant in the wine reservoir at all times. Each spout fills about two bottles per minute. Built-in drain allows for easy cleaning. All metal parts are made from 304-type stainless steel. Replacement fill spout seals are available. 9L reservoir.
16.5" L x 16" W x 21.25" H
Nozzle diameter: 12 mm (0.472441 inch)
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late July.
Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability
Made from 304 stainless steel throughout with passivated 2B polished finished on the interior
Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included!
20% extra headspace with a working volume of 2 bbl and max volume of 2.4 bbl
Glycol ready with 2" insulated cooling jacket—also available in 2 bbl Single Shell Conical
Ships domestically from within the contiguous United States
These heavy-duty Beer Tanks are purpose built for longevity, quality, and cost effectiveness, and boast a hefty list of quality features to ease the brewing process. Starting with High Quality 304 grade stainless steel, this jacketed tank comes ready for glycol cooling. Large 10" T.C. dome top port allows easy access for cleaning and sanitizing, and on top of that, a 1.5" T.C. port allows for the attachment of a CIP spray ball. Useful features such as Blowoff Pipe, Hop Ports and Rotating Racking Arms keep you brewing and fermenting at top efficiency.
The 1 & 2 bbl MB Conicals feature a sealed pressure gauge, as well as plunger-style sample valve to protect against infection.
Great Quality from MB
MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers.
Great Value from MoreBeer! Pro
If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.
Features:
304 stainless steel construction
The outer shell is 2 mm thick with a brushed finish
The inner wall is 3 mm thick with smooth ground welds, 2B finish and passivated
Includes a glycol jacket which is dimple welded and 1.5 mm thick
2" of internal insulation between tank and outer jacket
Oversized for 20% headspace
Pressure/Vacuum relief valve 1 Bar / 15 PSI
Pt100 Thermocouple interface
60° conical bottom
Sample valve
Rotating racking arm
Analog temperature gauge
Yeast dump port
Hop port
CIP port
Carb stone
Separate blow-off pipe
Specifications:
Grade 304 Stainless Steel
Internal Finish: #2B
Total Height w/ Blowoff Pipe: 64"
Tank Diameter w/ Fittings: 39"
Empty Weight: 397 lbs
Working Volume: 2 bbl
Max Volume: 2.4 bbls
Working Pressure: 1 Bar (14.5 psi)
Jacket Surface area: 1,188 in² (0.767 m²)
All ports are 1.5" TC except for 12" TC Dome Port, 4" TC Hopping Port, 2" TC Racking Arm, and 1/2" NPT Glycol Ports
Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
Add a barbed connection to your Weldless Wine Cooling Plate with this 90-degree hose tail elbow and threaded nut. 1/2" female threaded with 0.47" (12mm) barb.
Sold individually. You will need 2 hose tails for both inlet and outlet.
Material: Poliammide (nylon 66)
Replacement solenoid valve for MB Oil Heated Brewhouses. 3/4" G-Thread for 7 to 10 bbl brewhouses.
Connection type: Threaded
Working pressure: 0-6 bar
Medium temp: 0-180°C
Voltage: DC 24V
3/4" G-thread
304 stainless steel
Replacement solenoid valve for MB Oil Heated Brewhouses. 1/2" G-Thread for 1 to 5 bbl brewhouses.
Connection type: Threaded
Working pressure: 0-6 bar
Medium temp: 0-180°C
Voltage: DC 24V
1/2" G-thread
304 stainless steel
Replacement label discs for the semi-automated compact label applicator machine.
Blue guide discs only. Does not include black driven feed roller and mounting bracket.
KegLand Part Number: KL21838
Replacement base O-ring for 12" BevBright Lenticular Filter Housings.
Depending on when your 12" housing was purchased, you may require the 325mm diameter or the 350mm diameter O-ring. Please measure the O-ring that came with your unit to confirm which size you need.
Replacement base O-ring for 12" BevBright Lenticular Filter Housings.
Depending on when your 12" housing was purchased, you may require the 325mm diameter or the 350mm diameter O-ring. Please measure the O-ring that came with your unit to confirm which size you need.
Adjustable Capacity: Easily swap posts to run 1, 2, or 3 filter modules in one housing.
Batch Size Versatility: Perfect for small pilot runs up to full large-scale production volumes.
Optimized Flow: Choose the post (1, 2, or 3-High) to match your desired filtration capacity and speed.
BevBright Interchangeable Center Posts
Optimize your filtration capacity for any batch size. These interchangeable center posts allow you to run 1, 2, or 3 filter modules within a single BevBright Lenticular Housing. Whether you are running a pilot batch or a full production run, simply swap the post to match your volume.
Specifications:
Compatibility: Fits 12" and 16" filter modules.
Function: Enables variable capacity within a single housing unit.
Selecting Your Size:
1-High Post: Best for small batches, pilot runs, and fine polishing.
2-High Post: Ideal for medium-sized batches and general filtration.
3-High Post: Maximizes flow and capacity for large-scale production.
Adjustable Capacity: Easily swap posts to run 1, 2, or 3 filter modules in one housing.
Batch Size Versatility: Perfect for small pilot runs up to full large-scale production volumes.
Optimized Flow: Choose the post (1, 2, or 3-High) to match your desired filtration capacity and speed.
BevBright Interchangeable Center Posts
Optimize your filtration capacity for any batch size. These interchangeable center posts allow you to run 1, 2, or 3 filter modules within a single BevBright Lenticular Housing. Whether you are running a pilot batch or a full production run, simply swap the post to match your volume.
Specifications:
Compatibility: Fits 12" and 16" filter modules.
Function: Enables variable capacity within a single housing unit.
Selecting Your Size:
1-High Post: Best for small batches, pilot runs, and fine polishing.
2-High Post: Ideal for medium-sized batches and general filtration.
3-High Post: Maximizes flow and capacity for large-scale production.
Commercial Quality Base: Crafted from real fruit juice using the same formulations as commercial wineries.
Easy 5-Gallon Batches: One gallon of base yields five gallons of high-quality 10% ABV fruit wine.
No Adjustments Needed: Extremely convenient; no pH or acid adjustments required.
Simple & Convenient: Just add water and yeast to ferment.
All natural and made with real fruit juice, Vintner’s Best® fruit wine bases are crafted from the same formulations used by commercial wineries. One gallon of fruit wine base makes five gallons of high-quality fruit wine at 10% ABV. Extremely easy and convenient to make, requiring no pH adjustments and no acid adjustments. Simply dilute one gallon of Vintner's Best® Fruit Wine Base with four gallons of water, pitch yeast and stir!
The wine base is a blend of juice concentrates, HFCS, citric and malic acids and natural flavor designed to make a fermentable base for a fruit wine blend at 18.9°B. The product is blended, pasteurized. Diammonium phosphate is added as a yeast nutrient.
Benefits of Vintner’s Best® Fruit Bases:
All-natural fruit juice
6-8 weeks to finished product
No PH or acid adjustments
Shelf stable for up to two years
No refrigeration necessary
Scalable to any batch size
Pre-blended - no straining out fruit pieces
Easy and convenient
More inclusive – add only yeast and water
Re-sealable jug with tamper resistant seal
Over 30 flavors to choose from
Concentrate Specs:
°Brix: 73.1 min
Acidity: 2.2–2.6 (as citric acid)
Ingredients: High Fructose Corn Syrup, Apple Juice Concentrate, Water, Malic Acid, Natural Flavors
Cable for use between 2-pin cable and 24 VDC solenoid valves (gas).
Connector A: LP12, 2-pin male plug (in-line connector)
Connector B: DIN 43650 Form B
Color: Black
Length: 0.1m (3.9")
VineCo's Tinto Fuego Carmenère Syrah Wine Making Kit is now in stock and ready to ship. Grab this limited-edition kit while you still can!
Tinto Fuego embodies the heat and passion of Chilean winemaking, reflecting Chile’s sun-drenched days and cool Andean nights
Rich aromas of blackberry, black cherry, blueberry, and ripe plum with a palate enhanced by nuances of dark chocolate, black pepper, and a touch of warming spice
Medium-Full body and dry, 13% ABV
Whip up a batch in 30 mins or less! Yields 6 gallons (2 cases) of finished wine in 6-8 weeks
Bottle labels included for a professional finish
Tinto Fuego embodies the heat and passion of Chilean winemaking. Meaning “red fire”, the name reflects Chile’s sun-drenched days and cool Andean nights. This dramatic contrast in temperature brings vibrant acidity and deep, intense flavors.
Tinto Fuego a blend of Carmenère and Syrah from Chile’s renowned Maipo Valley is a rich, vibrant red that seamlessly marries the depth of Carmenère with the power of Syrah. It offers a plush texture with well-integrated tannins that lend structure without overshadowing the fruit. The nose is inviting and layered, revealing rich aromas of blackberry, black cherry, blueberry, and ripe plum. On the palate, these dark fruits are enhanced by nuances of dark chocolate, black pepper, and a touch of warming spice. The finish is long, savory, and satisfying, unfolding slowly with lingering notes of earth and spice.
About the Region: Maipo, Chile
Maipo, known as Chile’s most renowned wine region lies at the foot of the Andes, where warm, sunny days and cool nights create the perfect conditions for growing expressive reds. The valley’s well-drained alluvial soils lend structure, while the diurnal temperature shifts preserve acidity and aromatics.
This unique climate creates wines with ripe fruit character, fine tannins, and distinct earthy undertones. Whether showcasing spicy Carmenère or peppery Syrah, wines from Maipo reflect a balance of ripeness, elegance, and a strong sense of place rooted in the valley’s long viticultural heritage.
Food Pairings:
Grilled beef skewers with chimichurri
Stuffed peppers
Manchego
Key Features:
Flavor Profile: Aromas of blackberry, black cherry, blueberry, and ripe plum enhanced by nuances of dark chocolate, black pepper, and a touch of warming spice on the palate
Sweetness Level: Dry
Oak Influence: Medium-Heavy
Body: Medium-Full
Alcohol By Volume (ABV): 13%
Kit Volume: 14 L
Approximate Yield: 23 L
Ready to Bottle: 6 - 8 weeks
Bottle Labels: Included
VineCo's Alto Blanco Sauvignon Blanc Chardonnay Wine Making Kit is now in stock and ready to ship. Grab this limited-edition kit while you still can!
Alto Blanco reflects the high-altitude vineyards of Manchuela, Spain, and Maipo, Chile which create a bright, white blend with balance, structure, and elegance
Vibrant tropical fruit aromas and subtle herbal notes with a palate bursting with zesty citrus, crisp green apple, and juicy peach
Medium-bodied and dry, 12.5% ABV
Whip up a batch in 30 mins or less! Yields 6 gallons (2 cases) of finished wine in 6-8 weeks
Bottle labels included for a professional finish
Alto Blanco reflects the high-altitude vineyards of Manchuela, Spain, and Maipo, Chile. Both mountain regions where cool nights and elevated terrain help preserve crisp acidity in Sauvignon Blanc and develop complex flavors in Chardonnay. These conditions create a bright, white blend with balance, structure, and elegance.
Alto Blanco, a transcontinental blend of Sauvignon Blanc and Chardonnay from Spain and Chile, that unites Old World elegance with New Word vibrancy. On the nose, vibrant tropical fruit aromas and subtle herbal notes offer a lively introduction. The palate bursts with zesty citrus, crisp green apple, and juicy peach that is complimented by Sauvignon Blanc’s signature acidity and energy. Chardonnay rounds out the blend, with a smooth, medium-bodied texture and a gentle richness that softens the finish. A refreshing yet graceful wine that captures the best of both varietals, and continents in every sip.
About the Regions: Manchuela, Spain & Maipo, Chile
Tucked between the Júcar and Cabriel rivers, Manchuela in eastern Spain is a rising star known for its dramatic high plateaus, limestone rich soils, and continental climate. Across the globe, Maipo, Chile at the foot of the Andes, with its Mediterranean climate, alluvial soils and cooling mountain breezes is one of the country’s most iconic regions. Together, these dynamic regions produce aromatic wines with vibrant fruit character, lively acidity and refined structure.
Food Pairings:
Grilled shrimp with lemon and garlic
Goat cheese salad with citrus vinaigrette
Feta
Key Features:
Flavor Profile: Zesty citrus, crisp green apple, and juicy peach
Sweetness Level: Dry
Oak Influence: Unoaked
Body: Medium
Alcohol By Volume (ABV): 12.5%
Kit Volume: 14 L
Approximate Yield: 23 L
Ready to Bottle: 6 - 8 weeks
Bottle Labels: Included
Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability
Made from 304 stainless steel throughout with passivated 2B polished finished on the interior
Sanitary tri-clamp connections from top to bottom with centered bottom drain, sight glass, and dedicated CIP pipe system—all fittings included!
15% extra headspace with a working volume of 10 bbl and max volume of 11.5 bbl
Double walled with 80 mm thick polyurethane insulation and 1.5 mm thick dual cooling zone glycol jacket
Ships domestically from within the contiguous United States
MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set.
MB jacketed brite tanks are made from 304 stainless steel and built to high quality standards. All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by our one year warranty. Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume.
Great Quality from MB
MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our brite tanks between 1 and 60 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our tanks have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers.
Great Value from MoreBeer! Pro
If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.
Features Include:
15 PSI (1 bar) working pressure
Side manway door for cleaning
1.5" Tri-clamp carbonation stone
1.5" Tri-clamp pressure gauge
1.5" Tri-clamp dial face bi-metal, easy-read analog thermometer
1.5" Tri-clamp Perlick-style sample valve
2" Tri-clamp pressure/vacuum relief
2" Center bottom tri-clamp drain
4" Hopping Port
Ladder hooks
Sight-glass for reading volumes
Dedicated pipe system with 4" Tri-clamp center top opening and 1.5" tri-clamp rotating CIP spray ball for easy cleaning
3/4" NPT glycol ports
PT100 Thermocouple interface
Shadowless Manway
Construction:
304 stainless steel construction
Double walled with 80 mm thick polyurethane insulation
External Shell: 2 mm thick with brushed finish
Internal tank: 3 mm thick with smooth ground welds, 2B finish and passivated
Glycol Jacket: dual cooling zone, 1.5mm thick
Specifications:
Tank Height: 85"
Tank Diameter: 50"
Empty Weight: 728 lbs
Working Volume: 10 bbl
Total Volume: 11.5 bbl
Jacket Surface Area: 4,047 in² (2.611 m²)
Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability
Made from 304 stainless steel throughout with passivated 2B polished finished on the interior
Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included!
Separate cone and tank cooling jackets with 3" of internal insulation
20% extra headspace with a working volume of 20 bbl and max volume of 24 bbl
Ships domestically from within the contiguous United States
MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set.
Great Quality from MB
MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers.
Great Value from MoreBeer! Pro
If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.
Impressive Features
Built from quality-checked 304 stainless steel, our tanks boast a hefty list of features. Here are some key features that are not always included on all tanks.
3” of internal insulation between tank and outter jacket when the industry standard is 2”
Horizontal racking arm and carbonation stone
Separate cone and tank cooling jackets
DIN Rotating racking arm for safety and ease of use
4” TC top hop port with handle
Carbonation Stone included with all tanks
2” Bottom valve for easier trub removal (3.5 bbl and up)
CIP spinning spray ball and piping built-in (3.5 bbl and up)
25% head-space above stated volume
Industry standard 2b finish
All Features:
304 stainless steel construction
The outer shell is 2 mm thick with a brushed finish
The inner wall is 3 mm thick with smooth ground welds, 2B finish and passivated
Includes a glycol jacket which is dimple welded and 1.5 mm thick
Oversized for 25% average headspace
Pressure Relief/Vacuum Breaker valve rated at 1 Bar / 15 PSI
Pt100 Thermocouple
Perlick style sample valve
Spinning CIP cleaning head and separate piping
Rotating racking arm upgraded with DIN fitting for increased reliability
Analog temperature gauge
Oversized yeast dump port
Sealed Pressure Gauge
Hop port
Carb stone
Separate blow-off pipe
Side man-door
Ladder rack (7 bbl and up)
Shadowless Manway
Specifications for 20 bbl Conical:
Grade 304 Stainless Steel
Internal Finish: #2B
Tank Height: 117", With Blowoff Pipe: 127"
Tank Diameter: 62"
Empty Weight: 1,146 lbs
Working Volume: 20 bbls
Max Volume: 24 bbls
Working Pressure: 1 Bar (15 psi)
Jacket Surface area: 7,372 in² (4.756 m²)
All ports are 1.5" TC except for 4" TC Lid Hopping Port, 4" TC CIP Port (inner 1.5" TC to CIP ball adapter), 2" TC PVRV, 2" TC Drain Outlet, 2" TC Pressure Gauge, DIN 65 Rotating Racking arm (w/ 1.5" pipe), and 3/4" NPT Glycol Ports
Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability
Made from 304 stainless steel throughout with passivated 2B polished finished on the interior
Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included!
Separate cone and tank cooling jackets with 3" of internal insulation
Over 25% extra headspace with a working volume of 7 bbl and max volume of 9 bbl
Ships domestically from within the contiguous United States
MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set.
Great Quality from MB
MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers.
Great Value from MoreBeer! Pro
If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.
Impressive Features
Built from quality-checked 304 stainless steel, our tanks boast a hefty list of features. Here are some key features that are not always included on all tanks.
3” of internal insulation between tank and outer jacket when the industry standard is 2”
Horizontal racking arm and carbonation stone
Separate cone and tank cooling jackets
DIN Rotating racking arm for safety and ease of use
4” TC top hop port with handle
Carbonation Stone included with all tanks
2” Bottom valve for easier trub removal (3.5 bbl and up)
CIP spinning spray ball and piping built-in (3.5 bbl and up)
25% head-space above stated volume
Industry standard 2b finish
All Features:
304 stainless steel construction
The outer shell is 2 mm thick with a brushed finish
The inner wall is 3 mm thick with smooth ground welds, 2B finish and passivated
Includes a glycol jacket which is dimple welded and 1.5 mm thick
Oversized for 25% average headspace
Pressure Relief/Vacuum Breaker valve rated at 1 Bar / 15 PSI
1x Pt100 Thermocouple interface
Perlick style sample valve
Spinning CIP cleaning head and separate piping
Rotating racking arm upgraded with DIN fitting for increased reliability
Analog temperature gauge
Oversized yeast dump port
Sealed Pressure Gauge
Hop port
Carb stone
Separate blow-off pipe
Side man-door
Ladder rack (7 bbl and up)
Shadowless Manway
Specifications for 7 bbl Conical:
Grade 304 Stainless Steel
Internal Finish: #2B
Tank Height: 88", With Blowoff Pipe: 93"
Tank Diameter: 48"
Empty Weight: 640 lbs
Working Volume: 7 bbls
Max Volume: 9 bbls
Working Pressure: 1 Bar (15 psi)
Jacket Surface area: 3,325 in² (2.145 m²)
All ports are 1.5" TC except for 4" TC Lid Hopping Port, 4" TC CIP Port (inner 1.5" TC to CIP ball adapter), 2" TC PVRV, 2" TC Drain Outlet, 2" TC Pressure Gauge, DIN 65 Rotating Racking arm (w/ 1.5" pipe), and 3/4" NPT Glycol Ports
Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability
Made from 304 stainless steel throughout with passivated 2B polished finished on the interior
Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included!
Separate cone and tank cooling jackets with 3" of internal insulation
20% extra headspace with a working volume of 5 bbl and max volume of 6 bbl
Ships domestically from within the contiguous United States
MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set.
Great Quality from MB
MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers.
Great Value from MoreBeer! Pro
If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.
Impressive Features
Built from quality-checked 304 stainless steel, our tanks boast a hefty list of features. Here are some key features that are not always included on all tanks.
3” of internal insulation between tank and outter jacket when the industry standard is 2”
Horizontal racking arm and carbonation stone
Separate cone and tank cooling jackets with individual Pt100 Thermocouples
DIN Rotating racking arm for safety and ease of use
4” TC top hop port with handle
Carbonation Stone included with all tanks
2” Bottom valve for easier trub removal (3.5 bbl and up)
CIP spinning spray ball and piping built-in (3.5 bbl and up)
25% head-space above stated volume
Industry standard 2b finish
All Features:
304 stainless steel construction
The outer shell is 2 mm thick with a brushed finish
The inner wall is 3 mm thick with smooth ground welds, 2B finish and passivated
Includes a glycol jacket which is dimple welded and 1.5 mm thick
Oversized for 25% average headspace
Pressure Relief/Vacuum Breaker valve rated at 1 Bar / 15 PSI
1x Pt100 Thermocouple interface
Perlick style sample valve
Spinning CIP cleaning head and separate piping
Rotating racking arm upgraded with DIN fitting for increased reliability
Analog temperature gauge
Oversized yeast dump port
Sealed Pressure Gauge
Hop port
Carb stone
Separate blow-off pipe
Side man-door
Ladder rack (7 bbl and up)
Shadowless Manway
Specifications for 5 bbl Conical:
Grade 304 Stainless Steel
Internal Finish: #2B
Tank Height: 81", With Blowoff Pipe: 86"
Tank Diameter: 42"
Empty Weight: 574 lbs
Working Volume: 5 bbls
Max Volume: 6 bbls
Working Pressure: 1 Bar (15 psi)
Jacket Surface area: 2,176 in² (1.404 m²)
All ports are 1.5" TC except for 4" TC Lid Hopping Port, 4" TC CIP Port (inner 1.5" TC to CIP ball adapter), 2" TC PVRV, 2" TC Drain Outlet, 2" TC Pressure Gauge, DIN 65 Rotating Racking arm (w/ 1.5" pipe), and 3/4" NPT Glycol Ports
Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
California Riesling with floral, green apple and lime notes
Light bodied with an off-dry finish, 12% ABV
Yields 6 gallons (2 cases) of finished wine in approximately 4 weeks
Looking for a delicious and versatile wine for any occasion? Winexpert Classic™ is the perfect wine to have on hand for life’s big events and everyday moments. Experience the satisfaction of crafting high quality and versatile wines from the world’s best known countries – from the ripe fullness of a lively Shiraz to a crisp Italian Pinot Grigio, delicious wine is yours for the making.
From this box to your bottle in just 4 weeks.
Riesling, California
Floral, green apple and lime.
Sweetness: Off-Dry
Oak: None
Body: Light
ABV: 12%
