Sometimes a single draft tower isn't enough for your dream home bar or kegerator. If you're building out a draft system that will have more than four faucets, we highly recommend the KOMOS Double T Bar Draft Tower. Available in 6-tap and 8-tap models, these towers provide ample room for your faucets and will give your draft setup a much cleaner look than having multiple single-column towers. Perfect for upgrading an existing KOMOS Double-Wide Kegerator with two individual towers or designing your own home bar or kegerator. Mounting hardware, tower collars and gaskets included. The tower does not include faucets, shanks, tap handles, or draft tubing. Assembly To assemble the tower, remove the dust caps on either side and remove the foam insulation. Start with the inner most shank hole on either side and work your way outward. We recommend installing each shank and attaching the draft tubing before moving on to the next shank hole. The top section of the tower is 5" in diameter, so most people should be able to reach inside to install the shanks by hand or with the help of a draft wrench. When all the shanks have been mounted, reinsert the foam insulation. The tower may come with more insulation than needed and may need to be cut thinner before reinserting. We recommend using the Double Offset Shank Wrench to help with assembly. Duotight Compatible Tower Shanks We highly recommend pairing the draft tower with Intertap Tower Shanks with Duotight Compatible Barb. When it comes to assembly, there's nothing easier than Duotight push-to-connect fittings, and the same goes for whenever you might need to disassemble a line for cleaning. Duotight fittings pair perfectly with EVABarrier draft tubing, our preferred beer & gas tubing that offers superior protection from oxidation, CO2 loss, and microbial growth. Tower Dimensions: 29.5" L x 5" D x 16" H. The centers of the columns are approximately 16" apart. Not compatible with the KOMOS Olympus III kegerator.
Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Made from 304 stainless steel with ultra-high-quality laser welds 2R rated interior finish resists residue build-up and is easy to clean Air pump with pressure gauge, airlock, and ball valve included Made in Germany by Speidel We are proud to offer our small Variable Volume Tanks from Speidel - a German manufacturer of premium quality stainless steel tanks for the wine industry. The tank body is fabricated from 304-type stainless steel, while the floating lid is made from 316-type stainless and has an inflatable bladder that pumps up to seal the wine off at any volume level. They can be used for primary fermentation as well as aging. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. These tanks arrive to you complete and ready to go out of the box after a little assembly. The tanks are fitted with 1/2 inch threaded ports to accomodate the included 1/2 inch stainless steel ball valve and 1/2 inch stainless plug. The plugged port is intended for use with an optional thermometer (MT514). Also compatible with shielded thermowell for digital temperature controller probes (FE62). Speidel Quality Features: Rubber Lid Gaskets: Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Warranty - Speidel-Behaelter, GmbH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Dimensions - 550mm D x 999mm H (21.6" D x 39.3" H) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.
Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits) Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted Works prefectly as a fermentation chamber, or add draft tower and faucet options to deck out the kegerator as you see fit! The KOMOS Kegerator features upgraded components for faster chilling and more efficient operation. It also has a redesigned interior that fits up to four 5-gallon kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless steel door, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller that can adjust internal temperatures from 26 - 82°F. This allows homebrewers to use it for fermentation and is something that other kegerators don't do. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. KOMOS Regulator The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Optional Draft Towers Both draft tower options are made from stainless steel, a huge upgrade over chrome plated towers commonly found on other kegerators. The difference is simply in the appearance. Do you prefer the sleek look of brushed stainless, or the quietly ominous appearance of matte black? The matte black tower option pairs perfectly with the NukaTap Stealth Bomber faucets, which also feature a matte black finish. Or mix and match. You do you! Each draft tower kit comes standard with Duotight fittings and EVABarrier draft tubing. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier—no more hose clamps or heating water to soften tubing. Duotight fittings are included for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Optional Faucets The most popular forward-sealing faucets we offer are, without a doubt, the Intertap and the NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Both faucets feature s modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout, and all attachments are cross compatible. The Intertap boasts all stainless steel internal components, whereas NukaTap's internal shuttle is made from TPV, but the NukaTap was designed with a lower thermal mass for reduced first pour foam. And for the price-conscious brewer, we off the industry standard beer faucet. It may not have the same bells and whistles as the other options, but it is no less dependable. For more info on each faucet option, check them out below the description. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Drip Tray is removable for easy cleaning Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Outdoor Kegerator.
Abstrax® Skyfarm Series represents the freshest, most perfect version of fruit flavor and aroma
Add high-amplitude, recognizable fruit flavor to your beer, cider, or seltzer without the hassle and potential downsides of using whole fruit or puree
Flavor/Aroma: Tropical, Dank, Fruity
Built with terpenes for consistent results every time. Absolutely no variance or guesswork that comes with fresh fruit products
Zero added sugar guarantees there's no risk of refermentation after you add it to your beverage
Papaya
Book an interstellar trip to planet Papaya! Enjoy a flying car ride through exotic jungles overgrown with dank, tropical delights and consider a late checkout to fully experience all the juicy glory of this extraterrestrial fruit.
Natural Fruit Flavors
The Skyfarm series represents the freshest, most perfect version of fruit flavor and aroma. It has none of that “cooked” off-flavor that can sometimes tank a beer. There’s also none of that grandma’s perfume, potpourri, or floral junk either.
Skyfarm is high-amplitude, recognizable flavor - and that’s important because when you put Strawberry on your bottle label or tap handle, people are going to expect to smell strawberries. It’s built with terpenes for the ultimate flavor consistency, ensuring the same flavor in every season.
Benefits
Skyfarm offers the same ease-of-use benefits as fruit purees without the downsides. No sugar is added to your batch so there's no risk of refermentation, there's no solid waste to remove when your beer is ready to be packaged, and there's a much lower risk of micro contamination compared to adding fruit products to your vessel when fermentation is complete. Since you can add Skyfarm at the coldest point in your process - after cold crashing, in the brite tank, or your keg - there is also no risk of aromatic compounds being driven out through your blowoff. Skyfarm also contributes no haze to your finished beer and doesn't leave a sticky residue behind, so you can forget about scrubbing fruit gunk from your tanks.
Dosage
Dosing rate greatly depends on your recipe and desired flavor intensity. We recommend starting with 2.5 mL for a 5-gallon batch and increasing to 5-15 mL for high-intensity flavor impact. Add after fermentation is complete, ideally at the coldest and latest point in your process, in your fermenter, keg, or bottling bucket.
Features:
100% efficient flavor/aroma transfer
No added mouthfeel. Won't impart sweetness or body
Contains no sugar. Zero risk of refermentation
Increases yield by avoiding product absorption
TTB Approved
Powered by Terpenes
Repeatable
Recommended storage: 40-90°F. Do not freeze.
Brewtools pro steam hats are designed for maximum flexibility. They feature a silicone edge seal, 4 clamps to hold it in place on your brewing system, a 110mm inspection hole you can add your hops through when boiling, 2 silicone covered handles and a 4 inch accessory mount on top. The silicone plug for the inspection hole is included. Remember to order clamp and gasket for the top port. For User Manuals and support, please follow this link to Brewtools Docs.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late July.
Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability
Made from 304 stainless steel throughout with passivated 2B polished finished on the interior
Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included!
20% extra headspace with a working volume of 1 bbl and max volume of 1.2 bbl
2mm thick single shell design—See related product for the 1 bbl Jacketed Conical
Ships domestically from within the contiguous United States
These heavy-duty Beer Tanks are purpose built for longevity, quality, and cost effectiveness, and boast a hefty list of quality features to ease the brewing process. Starting with High Quality 304 grade stainless steel, the tank features a 2 mm thick single shell design. Large 10" T.C. dome top port allows easy access for cleaning and sanitizing, and on top of that, a 1.5" T.C. port allows for the attachment of a CIP spray ball. Useful features such as Blowoff Pipe, Hop Ports and Rotating Racking Arms keep you brewing and fermenting at top efficiency.
The 1 & 2 bbl Conicals feature a sealed pressure gauge, as well as plunger style sample port to protect against infection.
Great Quality from MB
MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers.
Great Value from MoreBeer! Pro
If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.
Features:
304 stainless steel construction
Single shell design, inner surface is 2B finish and passivated
Oversized for 20% headspace
Pressure/Vacuum relief valve 1 Bar / 15 PSI
60° conical bottom
Sample valve
Rotating racking arm
Analog temperature gauge
Yeast dump port
Hop port
CIP port
Carb stone
Separate blow-off pipe
Specifications:
Grade 304 Stainless Steel
2mm thick single shell design
Internal Finish: #2B
Total Height w/ Blowoff Pipe: 53"
Tank Diameter: 19.75"
Empty Weight: 110 lbs
Working Volume: 1 bbl
Max Volume: 1.2 bbls
Working Pressure: 1 Bar (14.5 psi)
All ports are 1.5" TC except for 10" TC Dome Port and 4" TC Hopping Port
Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
2 bbl example photo shown.
Premium Bromobutyl Lining for Flavor Purity: Engineered with high-performance Bromobutyl that is more inert than standard Chlorobutyl, ensuring a neutral, odor-free transfer with no "break-in" period or rubbery off-flavors.
Ultimate Oxygen Barrier: Protects your beer’s shelf life and delicate aromatics with a superior gas permeability barrier that outperforms EPDM and Chlorobutyl to prevent oxygen ingress.
High-Heat & Steam Resilience: Built to withstand the rigors of professional sanitation, handling continuous CIP cycles up to 225°F and intermittent steam sterilization up to 248°F.
Crush-Resistant & Rugged Construction: Features a high-tensile monofilament helix to prevent kinking in high-traffic cellars, wrapped in an abrasion- and ozone-resistant EPDM outer cover.
Hygienic, Microbe-Resistant Bore: The ultra-smooth internal bore prevents biofilm buildup and is designed for gapless integration with ForgeFit® crimped tri-clamp fittings to ensure a sanitary flow.
ForgeFit® Blue Steel Brewery Tubing
The Ultimate Bromobutyl Performance for Professional Brewing
Elevate your cellar operations with ForgeFit® Blue Steel, the premium brewery hose engineered for brewers who refuse to compromise on flavor integrity and oxygen control. While many standard hoses rely on Chlorobutyl linings, Blue Steel is crafted from high-performance Bromobutyl—setting a new benchmark for durability, purity, and protection.
Why Bromobutyl? The "Blue Steel" Advantage
The choice of lining material is the difference between a good beer and a world-class one. Here is how our Bromobutyl lining outperforms the industry-standard Chlorobutyl:
1. Neutral Flavor Profile from Day One
Chlorobutyl hoses often require a rigorous "break-in" period or chemical soaks to remove lingering rubbery odors. Bromobutyl is inherently more inert and neutral. With Blue Steel, you get a clean, odor-free transfer immediately, protecting your beer from unwanted "off-flavors" or leachables.
2. Higher Temperature Resilience for CIP
Bromobutyl’s unique chemical structure allows it to withstand higher temperature spikes compared to standard Chlorobutyl. While common linings might soften or degrade over 200°F, Blue Steel is designed to handle continuous CIP cycles up to 225°F and intermittent steam sterilization up to 248°F.
3. Superior Oxygen Barrier
Beer’s greatest enemy is oxygen. Bromobutyl offers significantly lower gas permeability than both EPDM and Chlorobutyl. This creates a near-impenetrable wall against O2 ingress during transfer, ensuring your delicate aromatics and shelf life remain exactly as intended.
Comparison at a Glance
Feature
Chlorobutyl (Standard)
Bromobutyl (Blue Steel)
Oxygen Permeability
Low
Ultra-Low
Odor/Flavor Transfer
Minimal (requires break-in)
Zero (Neutral)
Max Temp (CIP)
~200°F - 212°F
Up to 248°F
Chemical Stability
Good
Excellent
Flexibility
High
Superior Kink Resistance
Product Features
Ultra-Smooth Bore: Specialized microbe-resistant tube prevents biofilm buildup and simplifies sanitation.
Kink & Crush Resistant: Reinforced with a high-tensile monofilament helix for maximum durability in high-traffic brewhouses.
Rugged Outer Cover: The signature "Blue Steel" EPDM cover is abrasion, ozone, and chemical resistant—built to survive the wet, high-drag environment of a production cellar.
Blue Steel Construction:
Inner Layer: Food-grade Bromobutyl Rubber (White)
Outer Layer: Anti-aging Bromobutyl Rubber (Blue)
Reinforcement Layer: High-strength synthetic cord + helical steel wire reinforcement
Temperature Range: -40° to 248°F
Max. Temperature for Steam Cleaning: 275°F (30 minutes*)
*Not for continuous steam service
Operating Pressure: 150 psi
Inner Diameter: 1.5" (38mm)
Outer Diameter: 2" (52mm)
Bend Radius: 2.95" (75mm)
Certifications: FDA 21 CFR 177.2600
Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability
Made from 304 stainless steel throughout with passivated 2B polished finished on the interior
Sanitary tri-clamp connections from top to bottom with centered bottom drain, top vent/CO2 port with butterfly valve, and 4" hopping port—all fittings included!
15% extra headspace with a working volume of 2 bbl and max volume of 2.3 bbl
True domed top and bottom with full length site gauge with sediment trap
2mm thick single shell design—2 bbl Jacketed Brite also available
Ships domestically from within the contiguous United States
Available Ludicrous Coil for glycol-supplied temperature control
MB brite tanks are made from 304 stainless steel and built to high quality standards. All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by our one year warranty. Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume.
The standard 1 & 2 bbl MB Brites feature a single shell design, sealed pressure gauge, and plunger-style sample valve to protect against infection. They also feature full length site gauges that extend below the bottom of the tank. This allows you to see when the tank is down to its last couple of pints, rather than its last couple of gallons.
Please note: these units do not have a built-in cooling jacket and are intended to be used in a walk-in cold room for temperature control.
Great Quality from MB
MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our brite tanks between 1 and 60 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our tanks have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers.
Great Value from MoreBeer! Pro
If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.
Features Include:
304 stainless steel construction
True domed top and bottom
Full length site gauge with sediment trap
Pressure/Vacuum relief valve 1 Bar / 15 PSI
Carbonation stone
Sealed pressure gauge
Analog temperature gauge
Sample valve
Center bottom tri-clamp drain
Top vent/CO2 port with butterfly valve
Pt100 Thermocouple interface
Specifications:
Grade 304 Stainless Steel
2mm thick single shell design
Internal Finish: #2B
Tank Height w/ Blowoff Pipe: 48.5"
Tank Diameter w/ Fittings: 31"
Empty Weight: 154 lbs
Working Volume: 2 bbl
Max Volume: 2.3 bbl
Working Pressure: 1 Bar (14.5)
All ports are 1.5" TC except 12" TC Dome Port and 4" TC Hopping Port
Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability
Made from 304 stainless steel throughout with passivated 2B polished finished on the interior
Sanitary tri-clamp connections from top to bottom with centered bottom drain, sight glass, and dedicated CIP pipe system—all fittings included!
Over 15% extra headspace with a working volume of 30 bbl and max volume of 35 bbl
Double walled with 80 mm thick polyurethane insulation and 1.5 mm thick dual cooling zone glycol jacket
Ships domestically from within the contiguous United States
MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set.
MB jacketed brite tanks are made from 304 stainless steel and built to high quality standards. All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by our one year warranty. Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume.
Great Quality from MB
MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our brite tanks between 1 and 60 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our tanks have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers.
Great Value from MoreBeer! Pro
If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.
Features Include:
15 PSI (1 bar) working pressure
Side manway door for cleaning
1.5" Tri-clamp carbonation stone
1.5" Tri-clamp pressure gauge
1.5" Tri-clamp dial face bi-metal, easy-read analog thermometer
1.5" Tri-clamp Perlick-style sample valve
2" Tri-clamp pressure/vacuum relief
2" Center bottom tri-clamp drain
4" Hopping Port
Ladder hooks
Sight-glass for reading volumes
Dedicated pipe system with 4" Tri-clamp center top opening and 1.5" tri-clamp rotating CIP spray ball for easy cleaning
3/4" NPT glycol ports
2x PT100 Thermocouple interface
Shadowless Manway
Construction:
304 stainless steel construction
Double walled with 80 mm thick polyurethane insulation
External Shell: 2 mm thick with brushed finish
Internal tank: 3 mm thick with smooth ground welds, 2B finish and passivated
Glycol Jacket: dual cooling zone, 1.5mm thick
Specifications:
Tank Height: 112"
Tank Diameter: 69"
Empty Weight: 1,367 lbs
Working Volume: 30 bbl
Total Volume: 35 bbl
Jacket Surface Area: 9,849 in² (6.354 m²)
Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
Made from high-quality Slavonian oak sustainably sourced from Hungarian forests
Superior in long term storage due to the tight grain and slow release of phenolic compounds
Equivalent or superior quality compared to French Oak barrels at a much more affordable cost
Zinc-plated steel barrel hoops for corrosion resistance
Coopered by the world-renowned Balazs Nagy
Balazs barrels is a long-trusted brand of Hungarian oak barrels coopered by the famous Balazs Nagy. These barrels are equal or better in quality to French Oak barrels but available at a fraction of the cost of their more famous counterparts. Renowned for respecting fruit, Hungarian barrels offer winemakers a great option to impact the mouthfeel, structure and flavor of wine without stepping on the terroir of your grapes.
Due to the tight grain and slow release of phenolic compounds, you can feel secure storing your wine in Hungarian barrels longer than you can with other barrels. The slow process of micro oxygenation rounds the wine while various compounds in the wood such hemicellulose, lipids, and lignins are slowly integrated.
As most barrel makers know, the best source of wood for wine barrels is the oak grown in the territory of old-time Hungary, known as Slavonian oak. This rare, high-quality oak can be found in the Zemplén Mountains and in the Tokaj oak woods. The specific type of oak in those territories, and what is used in Balazs barrels, is the Quercus Petrea. This oak is characterised by a dense, hard structure combined with extra flavor. Forestry workers look after these forests with considerable expertise, and the forest density ratio in Hungary is 20–24%, with selective logging taking place between November and April. Once the wood is sourced, it is air dried and aged for 24-28 months before cooperage.
Balázs Barrels is establishing a direct cooperation with the forestry workers, ensuring the continuous supply of the best quality oak, allowing them to source and work with the most excellent oak for wine barrel manufacturing from the foremost Hungarian forests.
56 L (14.8 gal)
Height - 24"
Head Diameter - 14.37"
Abdomen Diameter - 18.3"
Stave Thickness - 7/8 - 1"
Bung Hole - 41 mm
Empty Weight - 51 lbs
Medium Toast
Barrel hoops made from zinc-plated steel for corrosion resistance
Variable capacity tank well-suited for fermentation, short-term wine storage, kombucha, pickling, and other applications
Floating lid can be positioned as needed to match the volume of the liquid you're working with
Tank & lid are made from 304 stainless steel with a food-grade, clear plastic gasket for the lid
Air pump with pressure gauge, dry airlock, and spigot are included
Made in Italy by Marchisio
Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.
Considerations for Winemaking
When used in winemaking we recommend these tanks for fermentation and short-term storage. If you are considering storing wine in a variable volume tank for longer than a month, we suggest you consider our German-made Speidel Variable Volume Tanks. In addition to other quality features like a mirror polish inside, thicker stainless, and robotically welded seams, Speidel tanks feature a proprietary lid gasket that only fits their tanks. This gasket is made from a very high quality, thick, white, food-grade, material that makes a true seal and resists oxygen transfer. This gasket also does not have the seam line that clear gaskets have. To learn more about the clear gaskets watch our video listed below the product copy. All variable volume tanks other than those from Speidel, including these tanks from Marchisio, feature a standard clear gasket that is sufficient for many applications, but we do not recommend them for long term wine storage.
Marchisio
We have been buying tanks from Marchisio since the 1990’s, so we have a long history of collaboration. Marchisio is a classic Italian tank manufacturer that represents the best value in the industry. Great quality at a very competitive price. All tanks have a classic marbled finish on the outside and a smooth polished finish on the inside. Each tank includes a dry airlock – a style of airlock that has a marble inside to make a seal. We recommend replacing this airlock with a classic water airlock to reduce potential oxidation. Includes 3/4" chrome plated spigot.
Includes:
304 Stainless Tank
304 Stainless Floating Lid
Food-Grade Floating Gasket
Air Pump with pressure gauge
Connection kit for connecting gasket to pump
Dry Airlock for tank
Chrome Plated Spigot
400L Specifications:
Nominal volume: 400 Liters (105.7 gallons)
Effective volume: 405 Liters (107.0 gallons)
Diameter: 65 cm (26 inches)
Height: 130 cm (51 inches)
Valve size: 3/4" BSP
Thickness (Bottom X side, in mm): 1.0 X 0.7
*Please Note: Tank may differ slightly from image shown. Stands are sold separately.
Speidel's BO style tank is a flat bottomed, variable volume tank for basic storage of wine. A no-frills tank that's just rock solid. For a pre-configured version of this tank style that can be pre-ordered for wine season please see our GER110VF, GER220VF, GER290VF and GER650VF tanks. Key Features Available from 110L to 1600L effective capacity. Stated tank volumes do not include the extra wall height needed to secure the lid when the tank is full. Tanks can contain their stated volume of wine. Up to 290L tanks have a 17mm wide lid flange, larger tanks have a 42mm flange 110L & 220L tanks have 3/4" female BSP bottom port, 290L, 650L, 1100L, & 1600L Tanks have 1" male BSP bottom port. Liter scale on tank exterior View the resource Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.
Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Made from 304 stainless steel with ultra-high-quality laser welds 2R rated interior finish resists residue build-up and is easy to clean Air pump with pressure gauge, airlock, and ball valve included Made in Germany by Speidel We are proud to offer our small Variable Volume Tanks from Speidel - a German manufacturer of premium quality stainless steel tanks for the wine industry. The tank body is fabricated from 304-type stainless steel, while the floating lid is made from 316-type stainless and has an inflatable bladder that pumps up to seal the wine off at any volume level. They can be used for primary fermentation as well as aging. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. These tanks arrive to you complete and ready to go out of the box after a little assembly. The tanks are fitted with 1/2 inch threaded ports to accomodate the included 1/2 inch stainless steel ball valve and 1/2 inch stainless plug. The plugged port is intended for use with an optional thermometer (MT514). Also compatible with shielded thermowell for digital temperature controller probes (FE62). Speidel Quality Features: Rubber Lid Gaskets: Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Warranty - Speidel-Behaelter, GmbH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Dimensions - 550mm D x 999mm H (21.6" D x 39.3" H) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.
Variable capacity tank well-suited for fermentation, short-term wine storage, kombucha, pickling, and other applications
Floating lid can be positioned as needed to match the volume of the liquid you're working with
Tank & lid are made from 304 stainless steel with a food-grade, clear plastic gasket for the lid
Air pump with pressure gauge, dry airlock, and spigot are included
Made in Italy by Marchisio
Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.
Considerations for Winemaking
When used in winemaking we recommend these tanks for fermentation and short-term storage. If you are considering storing wine in a variable volume tank for longer than a month, we suggest you consider our German-made Speidel Variable Volume Tanks. In addition to other quality features like a mirror polish inside, thicker stainless, and robotically welded seams, Speidel tanks feature a proprietary lid gasket that only fits their tanks. This gasket is made from a very high quality, thick, white, food-grade, material that makes a true seal and resists oxygen transfer. This gasket also does not have the seam line that clear gaskets have. To learn more about the clear gaskets watch our video listed below the product copy. All variable volume tanks other than those from Speidel, including these tanks from Marchisio, feature a standard clear gasket that is sufficient for many applications, but we do not recommend them for long term wine storage.
Marchisio
We have been buying tanks from Marchisio since the 1990’s, so we have a long history of collaboration. Marchisio is a classic Italian tank manufacturer that represents the best value in the industry. Great quality at a very competitive price. All tanks have a classic marbled finish on the outside and a smooth polished finish on the inside. Each tank includes a dry airlock – a style of airlock that has a marble inside to make a seal. We recommend replacing this airlock with a classic water airlock to reduce potential oxidation. Includes 1/2" chrome plated spigot.
Includes:
304 Stainless Tank
304 Stainless Floating Lid
Food-Grade Floating Gasket
Air Pump with pressure gauge
Connection kit for connecting gasket to pump
Dry Airlock for tank
Chrome Plated Spigot
200L Specifications:
Nominal volume: 200 Liters (52.8 gallons)
Effective volume: 200 Liters (52.8 gallons)
Diameter: 50 cm (20 inches)
Height: 120 cm (47 inches)
Valve size: 1/2" BSP
Thickness (Bottom X side, in mm): 1.0 X 0.7
*Please Note: Tank may differ slightly from image shown. Stands are sold separately.
High-quality stainless steel fermentation and storage tank
Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress
Impeccable 2R (IIId) surface finish for easy cleaning
A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid
Made in Germany by Speidel
This new universal cask from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids. These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary. These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life.
Features:
304 SS construction
IIId surface finish - easy cleanup
15 l (3.9 gal) volume
Gasketed sealed tanks - no oxygen permeation during storage
35.2 cm (13.9") Height x 28 cm (11") Ø
German quality construction with 25 year warranty
Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting
The BrewEasy™ is a revolutionary new ultra-compact and economical all-grain brewing system. This patent pending system and process utilizes a two kettle recirculation infusion mash system called the Kettle-RIMS™ or K-RIMS™ process for short. This system is very simple to use and is a very approachable way to transition from extract to all-grain brewing. The BrewEasy™ system eliminates the need for a sparging, simplifying the process and saving time.
The BrewEasy™ provides all the simplicity and speed of a traditional no-rinse brew-in-a-bag (BIAB) system, but offers the temperature ramping capability and wort clarity of a traditional RIMS system. By eliminating the messy and hazardous lifting of hot grains found in BIAB systems you’ll find the BrewEasy to be pure brewing pleasure. Be sure to read through our manual (see the manual tab) to get all the details of the BrewEasy™ to see why this system may be the ticket for you
If you’re already a Blichmann Engineering BoilerMaker™ owner you’ll love the modularity of the BrewEasy. Buy only the components you need and save money! And the BrewEasy is the only system offered in electric and propane models!
How does it all work? This two kettle K-RIMS™ system eliminates the hot liquor tank of a traditional three tier system as well as the time consuming and somewhat complicated sparging process. While a three tier system is still the most versatile and efficient, the BrewEasy™ offers improved efficiency over traditional no-rinse BIAB while eliminating the lifting of hot grains. The recirculation through the mash bed generates super clear wort. And the optional BrewCommander can automate it all!
What's Included?
Electric Heated System
30 Gallon Mash Tun (top kettle)
BoilerMaker Kettle (with G2 valve)
AutoSparge Hole (in A2 location)
False Bottom
BrewEasy Lid kit
Lid adapter ring
AutoSparge
Drain tube (from top kettle)
1/2" silicone hose
(4) QuickConnector fittings
(4) Hose clamps
Orifice kit
Temp sensor Tee fitting
Hex fittings
30 Gallon Boil Kettle
BoilerMaker Kettle (with G2 valve)
BoilCoil holes (in R1 location)
BrewEasy kit
BoilCoil and cord
BrewCommander (Electric) with temp sensor and power cord
RipTide Brewing pump
Gas Heated System
Mash Tun (top kettle)
BoilerMaker Kettle (with G2 valve)
AutoSparge Hole (in A2 location)
False Bottom
BrewEasy Lid kit
Lid adapter ring
AutoSparge
Drain tube (from top kettle)
1/2" silicone hose
(4) QuickConnector fittings
(4) Hose clamps
Orifice kit
Temp sensor Tee fitting
Hex fittings
Boil Kettle
BoilerMaker Kettle (with G2 valve)
BrewEasy kit
BrewCommander (Electric) with temp sensor and power cord
RipTide Brewing pump
HellFire burner
Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
The BrewEasy™ is a revolutionary new ultra-compact and economical all-grain brewing system. This patent pending system and process utilizes a two kettle recirculation infusion mash system called the Kettle-RIMS™ or K-RIMS™ process for short. This system is very simple to use and is a very approachable way to transition from extract to all-grain brewing. The BrewEasy™ system eliminates the need for a sparging, simplifying the process and saving time.
The BrewEasy™ provides all the simplicity and speed of a traditional no-rinse brew-in-a-bag (BIAB) system, but offers the temperature ramping capability and wort clarity of a traditional RIMS system. By eliminating the messy and hazardous lifting of hot grains found in BIAB systems you’ll find the BrewEasy to be pure brewing pleasure. Be sure to read through our manual (see the manual tab) to get all the details of the BrewEasy™ to see why this system may be the ticket for you
If you’re already a Blichmann Engineering BoilerMaker™ owner you’ll love the modularity of the BrewEasy. Buy only the components you need and save money! And the BrewEasy is the only system offered in electric and propane models!
How does it all work? This two kettle K-RIMS™ system eliminates the hot liquor tank of a traditional three tier system as well as the time consuming and somewhat complicated sparging process. While a three tier system is still the most versatile and efficient, the BrewEasy™ offers improved efficiency over traditional no-rinse BIAB while eliminating the lifting of hot grains. The recirculation through the mash bed generates super clear wort. And the optional BrewCommander can automate it all!
What's Included?
Electric Heated System
15 Gallon Mash Tun (top kettle)
BoilerMaker Kettle (with G2 valve)
AutoSparge Hole (in A2 location)
False Bottom
BrewEasy Lid kit
Lid adapter ring
AutoSparge
Drain tube (from top kettle)
1/2" silicone hose
(4) QuickConnector fittings
(4) Hose clamps
Orifice kit
Temp sensor Tee fitting
Hex fittings
20 Gallon Boil Kettle
BoilerMaker Kettle (with G2 valve)
BoilCoil holes (in R1 location)
BrewEasy kit
BoilCoil and cord
BrewCommander (Electric) with temp sensor and power cord
RipTide Brewing pump
Gas Heated System
Mash Tun (top kettle)
BoilerMaker Kettle (with G2 valve)
AutoSparge Hole (in A2 location)
False Bottom
BrewEasy Lid kit
Lid adapter ring
AutoSparge
Drain tube (from top kettle)
1/2" silicone hose
(4) QuickConnector fittings
(4) Hose clamps
Orifice kit
Temp sensor Tee fitting
Hex fittings
Boil Kettle
BoilerMaker Kettle (with G2 valve)
BrewEasy kit
BrewCommander (Electric) with temp sensor and power cord
RipTide Brewing pump
HellFire burner
Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
LalVin 31™ performs well under such stressful conditions as low pH or low temperature In white wines it is known for acid reduction, light buttery flavor, respect for fruit, increased body and length of finish In red wines it is known for increasing berry fruit flavors and mouthfeel Lallemand Oenology specializes in the development, production, and marketing of top-grade yeast and bacteria MBR 31 was chosen by the ITV in France for use in white and red wines for high activity and positive flavor characteristics. In white wines it is known for acid reduction, light buttery flavor, respect for fruit, increased body and length of finish. In red wines it is known for increasing berry fruit flavors and mouthfeel. MBR 31 is a good strain for use at temperatures as low as 15°C (59°F). Of the MBR strains, it is the most tolerant of low pH. For more information about ML Bacteria, please see MoreWine!'s Guide to Malolactic Fermentation. 2.5 g: good for 66 gallons 25 g: good for 660 gallons Alcohol tolerance: <14% v/v. SO2 tolerance: <45 ppm pH: >3.1 Temperature: >55°F You can't store malolactic bacteria once the package has been opened. Note: Malolactic bacteria added during the ferment will compete with the yeast for nutrients and are antagonistic to yeast, sometimes causing problems resulting in stuck or stalled fermentations. The best time to add an ML culture is after racking off the gross lees.
This is a dome lid for Ss Brewtech 1/2 bbl Chronicals. It features a 3" tri clamp opening at the top to facilitate dry hopping or cleaning your fermenter in place. Made from 304 stainless steel. Does not include 3" TC gasket and clamp.
Provides yeast-accessible nitrogen to support healthy growth and steady fermentation performance
Supplies zinc and micronutrients that help improve yeast metabolism and stress tolerance
Promotes cleaner fermentations by supporting robust yeast health in demanding conditions
Helps improve consistency across batches, especially in nutrient-limited or high-gravity worts
Useful for maintaining stronger yeast condition in serial/repitch scenarios
Angel Yeast BrewNutri-AZ is a complete, balanced yeast nutrient designed to support healthy, consistent beer fermentations. It helps prevent sluggish performance by supplying organic nitrogen, yeast-accessible amino nitrogen, zinc, and micronutrients that promote strong yeast growth and stress tolerance—supporting reliable attenuation and a clean finish, especially in high-gravity, adjunct-heavy, or otherwise nutrient-deficient worts and other stressful fermentation conditions.
Usage Rate
0.15–0.30 g/L (15–30 g/hL), adjusted based on wort composition and fermentation stress level
Application Instructions
Dissolve in sterilized water and mix thoroughly. Add 10–15 minutes before the end of the boil, or dose directly into cooled wort in the fermenter.
Applications
Beer • High-Gravity Beer • Adjunct-Heavy / Nutrient-Deficient Worts • Sluggish Fermentations • Stressful Fermentations
These custom lengths of Novaflex® Connoisseurs Beverage Hose will come bare. Pre-cut lengths with fittings installed are in stock and ready to ship. Novaflex is a special kink and crush resistant suction & discharge rubber hose, designed for those more demanding applications requiring a product that meets 3-A (cert# 1803), FDA & USDA standards. This tube is for non-oily applications. Designed to meet the temperatures and chemical resistance associated with “cleaning in place” systems. This ultra smooth microbe resistant tube is built on special stainless steel mandrels for cleanliness. Novaflex Construction: Tube: White Chlorobutyl Reinforcement: Multiple plies of polyester tire cord & dual monofilament helix Cover: Gray EPDM abrasion resistant Temperature Range: -40° to 240°F (CIP to 248°F) Not for continuous steam service in. mm ID 1.5 38.1 OD 2.14 54.35 Bend Radius 4.5 114
Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability
Made from 304 stainless steel throughout with passivated 2B polished finished on the interior
Sanitary tri-clamp connections from top to bottom with centered bottom drain, sight glass, and dedicated CIP pipe system—all fittings included!
Over 20% extra headspace with a working volume of 5 bbl and max volume of 6.25 bbl
Double walled with 80 mm thick polyurethane insulation and 1.5 mm thick dual cooling zone glycol jacket
Ships domestically from within the contiguous United States
MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set.
MB jacketed brite tanks are made from 304 stainless steel and built to high quality standards. All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by our one year warranty. Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume.
Great Quality from MB
MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our brite tanks between 1 and 60 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our tanks have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers.
Great Value from MoreBeer! Pro
If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.
Features Include:
15 PSI (1 bar) working pressure
Side manway door for cleaning
1.5" Tri-clamp carbonation stone
1.5" Tri-clamp pressure gauge
1.5" Tri-clamp dial face bi-metal, easy-read analog thermometer
1.5" Tri-clamp Perlick-style sample valve
2" Tri-clamp pressure/vacuum relief
2" Center bottom tri-clamp drain
4" Hopping Port
Ladder hooks
Sight-glass for reading volumes
Dedicated pipe system with 4" Tri-clamp center top opening and 1.5" tri-clamp rotating CIP spray ball for easy cleaning
3/4" NPT glycol ports
PT100 Thermocouple interface
Shadowless Manway
Construction
304 stainless steel construction
Double walled with 80 mm thick polyurethane insulation
External Shell: 2 mm thick with brushed finish
Internal tank: 3 mm thick with smooth ground welds, 2B finish and passivated
Glycol Jacket: dual cooling zone, 1.5mm thick
Specifications:
Tank Height: 73"
Tank Diameter: 42"
Empty Weight: 551 lbs
Working Volume: 5 bbl
Total Volume: 6.25 bbl
Jacket Surface Area: 2,629 in² (1.696 m²)
Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
Replacement inner mesh bag for Marchisio Stainless Bladder Presses. This nylon sack fits just inside the stainless pressing screen prior to loading the press and provides a quick and easy way to manage the pressed pomace.
300L -- WE170
450L -- WE175
Replacement outer plastic cover for Marchisio Stainless Bladder Presses. This cover fits over the closed press during the pressing operation in order to collect any juice spray and direct it down to the trough at the bottom of the press.
300L -- WE170
450L -- WE175
Replacement outer plastic cover for Speidel Bladder Press. This cover fits over the closed press during the pressing operation in order to collect any juice spray and direct it down to the trough at the bottom of the press.
20L -- GER101S
40L -- GER102S
90L -- GER104 / GER104S
180L -- GER106
The Delta Zero comes standard with 6 mm diameter holes, which is perfect for most plums, apricots and peaches. Alternate baskets with various hole sizes are also available, allowing the destoner to be used with a wide range of produce.
Reference the chart below for the recommended hole size to suit your needs. Some fruit have multiple recommendations dependent on how large or small the fruit is.
Diameter
Recommended Use
0.6 mm
Berries, apples, pomegranates, strawberries
0.8 mm
Berries, apples, pomegranates, strawberries
1.2 mm
Tomatoes
1.5 mm
Tomatoes
2 mm
Olives
3 mm
Cherries
6 mm
Plums, apricots, small peaches
8 mm
Peaches
Motorized unit separates stems from elderberries Stainless steel construction throughout Screw Feed provides fast, continual hands-free operation 2,500 lbs per hour production capacity Made in Italy by EnoItalia Our #1 selling destemmer. This motorized unit with a stainless screw feed also features a stainless steel Body and Bin making it a completely stainless steel model. This model has been adapted specifically for processing elderberries, which have a smaller diameter than grapes. The destemmer can be purchased by itself or alongside the Stainless Stand & Chute. This stainless steel support stand features a closed bottom hopper that keeps your product contained while dropping into a receiving vessel or pump to move your fruit for further processing. Also compatible with the standard EnoItalia Stainless Stand & Chute if you prefer a three-sided, "open" bottom hopper. How These Work: Elderberries are loaded into the top bin where the powered screw feed continually pushes them towards the destemming chamber. The destemming chamber features a removable basket and rotating destemming shaft. Berries fall through the holes into your bucket. Stems get rotated through the basket by the destemming shaft until they exit at the end of the machine where they fall onto the ground or an awaiting bucket. Output Production Powered by a 1hp motor that provides an hourly production of approximately of up to 2500 lbs. Note that these machines must be fed with consistency to reach maximum throughput. Overload the machine with too many elderberries at one time and the motor will pause and actually slow down production. Cleaning Remove two quick bolts and the safety cover slides off and the internal stainless destemming grate slides out for easy cleaning. The hose out the rest of the unit. Comes with directions. Features: 304-Type Stainless Steel Bin, Body, Screw Feed, and basket A Screw Feed in the Receiving Bin for continual, faster, hands-free operation Solid Construction A powerful 110V 1HP motor which provides an hourly production of approximately 2500 lbs. Replacement parts are available Big, Red Emergency stop button on motor shuts down the machine in a hurry to help reduce chance of accident Overall dimensions: 47.6" long x 23.6" wide x 27.1" high. Weight: 110 pounds (50KG.) Figure 150 lbs for shipping weight with pallet.
Motorized unit crushes grapes and separates stems in one pass Stainless steel construction throughout Screw Feed provides fast, continual hands-free operation Self-adjusting rubber rollers are soft on grape stems to reduce tannin extraction 3,000 lbs per hour production capacity Made in Italy by EnoItalia Our #1 selling crusher/destemmer style, this motorized unit with a stainless screw feed also features a stainless steel Body and Bin making it a completely stainless steel model. The Crusher/Destemmer can be purchased by itself or alongside the Stainless Stand & Chute. How These Work: Grapes are loaded into the top bin where the powered screw feed continually pushes grapes towards the rollers. Grapes are gently crushed by the rubber rollers and then fall into the destemming chamber. The destemming chamber features a removable basket with a bunch of circular holes in it and rotating destemming shaft. Grapes fall through the holes into your bucket. Stems get rotated through the basket by the destemming shaft until they exit at the end of the machine where they fall onto the ground or an awaiting bucket. Rubber Rollers This model features soft rubber rollers which are softer on stems possibly reducing rough tannins in your wine. The rollers are spring loaded and self adjusting to protect against damage, such as the accidental passing of a small stone. Output Production Powered by a 1hp motor that provides an hourly production of approximately of up to 3000 lbs. Note that these machines must be fed with consistency to reach maximum throughput. Overload the machine with too many grapes at one time and the motor will pause and actually slow down production. Cleaning Remove two quick bolts and the safety cover slides off and the internal stainless destemming grate slides out for easy cleaning. The hose out the rest of the unit. Comes with directions. WE223S Features: 1) 304-Type Stainless Steel Bin, Body, Screw Feed, and basket 2) A Screw Feed in the Receiving Bin for continual, faster, hands-free operation 3) Spring Loaded, Self Adjusting Rubber Rollers 4) Solid Construction 5) A powerful 110V 1HP motor which provides an hourly production of approximately 3000 lbs. 6) Replacement parts are available 7) Big, Red Emergency stop button on motor shuts down the machine in a hurry to help reduce chance of accident Overall dimensions: 47" long x 19.6" wide x 25" high. Weight: 118 pounds (54KG.) Figure 158 lbs for shipping weight with pallet.
Hand operated unit crushes grapes and separates stems in one pass Stainless steel basket is removable for easy cleaning Fiber reinforced nylon fly-wheel Nylon rollers Made in Italy by EnoItalia Same unit as our standard Manual Destemmer but with the added longevity of a stainless steel receiving bin. This hand-cranked Crusher/Destemmer is perfect for the home winemaker processing small batches or is working in conjunction with friends who don't mind a little manual work! As the unit is cranked, the grapes are pulled by the agitator into the sturdy nylon rollers where first the grapes are crushed. Next, they fall into the stainless basket where a rotating shaft with paddles separates stems from grapes. The crushed and de-stemmed grapes then fall through the basket while simultaneously the stems are pushed out the end and into a refuse can. All of our units feature removable easy-to-clean stainless grates where the grapes fall through after having been crushed. Imported from Italy from Enoitalia. The Crusher/Destemmer can be purchased by itself or alongside the Stainless Stand & Chute. Features: Stainless Steel Receiving bin Fiber reinforced nylon fly-wheel Stainless Steel Grate that slides out for easy cleaning Sturdy Nylon Rollers Output is speed is as fast as you can crank! Replacement parts are available Product Dimensions 48"Lx27"Hx20"W How to Assemble the Optional Stand & Chute:
Hand operated unit crushes grapes and separates stems in one pass Stainless steel basket is removable for easy cleaning Fiber reinforced nylon fly-wheel Aluminum rollers Made in Italy by EnoItalia This hand-cranked Crusher/Destemmer is perfect for the home winemaker processing small batches or is working in conjunction with friends who don't mind a little manual work! As the unit is cranked, the grapes are pulled by the agitator into the rollers where first the grapes are crushed. Next, they fall into the stainless basket where a rotating shaft with paddles separates stems from grapes. The crushed and de-stemmed grapes then fall through the basket while simultaneously the stems are pushed out the end and into a refuse can. All of our units feature removable easy-to-clean stainless baskets (grates) where the grapes fall through after having been crushed. The Crusher/Destemmer can be purchased by itself or alongside the Stainless Stand & Chute. Features: Enamel coated body, bin, and agitator 304-Type Stainless Steel Basket (can be removed for easy cleaning) Fiber reinforced nylon fly-wheel Aluminum Rollers Output is speed is as fast as you can crank Replacement parts available Color of enamel may vary Product Dimensions 48"Lx27"Hx20"W How to Assemble the Optional Stand & Chute:
Coming soon! The Euro 30 is now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is late summer 2026.
Self-priming flexible impeller pump for moving wine or juice
Stainless steel pump head with 1.5" tri-clamp connections
On/off switch for easy operation
19.8 gallons per minute flow rate
Stainless bypass for reducing flow rate
Made in Italy by EnoItalia
The Euro 30 is a great versatile winery pump for all around cellar needs. The sanitary connections are 1.5" TC to allow for easy hook up of hoses, filters, fillers, you name it. With the included SS Bypass, you can reduce flow rates up to 25%. SS head means easy maintenance, and a power switch on the body keeps all necessary controls conveniently accessible.
Features:
Flow rate is 19.8 gpm
Max Pressure: 40 PSI (2.8 BAR)
1.5" Tri-Clover inlet and outlet
1.5 HP motor
Self-priming
Recommended temperature range: 40 - 150°F (5 - 65°C)
SS Bypass for reducing flow
SS head w/ flexible impeller
110V
Coming soon! The 40-Plate 20x20 Plate Filter is now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is August 2026.
Rolling cart plate filter for wine or oil
Plates made from food-grade PPA
Built-in EURO 20 centrifugal pump
Stainless ball valve and sample tap
1,500L/h wine filtering capacity
Made in Italy by EnoItalia
Made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (40 plates). Includes EURO 20 flexible impeller pump. Mounted to trolley cart with rolling casters.
Features:
Stainless ball valve
Stainless sample tap
Pressure gauge
Wine Capacity: 900-1500 L/h (237-396 gal/h)
Oil Capacity: 900 L/h (237 gal/h)
Pump Barbs: 20 mm (0.78")
Dimensions: 23.6" L x 19.7" W x 29.5" H
Weight: 108 lbs
110V
Rolling cart plate filter for wine or oil
Plates made from food-grade PPA
Built-in ENOS 20 centrifugal pump
Stainless ball valve and sample tap
280L/h wine filtering capacity
Made in Italy by EnoItalia
Made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (10 plates). Includes ENOS 20 pump with stainless body and impeller. Mounted to trolley cart with rolling casters.
Features:
Stainless ball valve
Stainless sample tap
Pressure gauge
Wine Capacity: 130-280 L/h (34-73 gal/h)
Oil Capacity: 130 L/h (34 gal/h)
Pump Barbs: 20 mm (0.78")
Dimensions: 23.6" L x 19.7" W x 29.5" H
Weight: 70.5 lbs
110V
What puts the KOMOS Olympus Kegerator in a league of its own?
Spacious all-stainless interior can hold up to TWENTY 5-gallon Slimline Torpedo homebrew kegs
Commercial-level refrigeration components provide powerful cooling capacity
Double-paned glass doors are self-closing and come with lock & key
Stainless steel forward-sealing faucets offer a huge upgrade over common chrome plated brass taps
Choose from the classic stainless or upgraded stainless flow control model
Faucets mount to high-quality stainless steel towers, rather than cheap chrome plated towers
Interior fan diverts cold air up into the towers to keep your beer lines cold and reduce foaming
EVABarrier double walled draft tubing protects your beer against oxidation
Duotight push-to-connect fittings make assembly a breeze
Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted
The KOMOS Olympus Kegerator was engineered with commercial use in mind, and easily stands up to the rigorous demands of a professional environment. That being said, this absolutely gorgeous kegerator will only enhance whatever room it finds itself in, whether that's the local taproom or your home bar.
Swinging glass doors open up to an incredibly spacious interior with enough room to fit up to twenty 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs, or five full sized Commercial Sanke Kegs. If you don't plan on packing it full of kegs, adjustable-height wire racks provide the perfect spot to store bottles and cans. And since they'll be on beautiful display thanks to interior lighting, no more standing with the fridge door open to see what there is to drink! Whether you choose the single, double, triple, or quad tap configuration, you'll receive NukaTap stainless steel faucets, the newest in forward-sealing faucet design. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Rather than a chrome plated plastic towers, the NukaTap faucets are mounted to stainless steel towers that remain cool before, during, and after each pour thanks to tower fan diverters that recirculate cold air within the kegerator and blows it up into the towers to keep your beer lines cold and reduce foaming. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Olympus Kegerator include its powerful cooling capacity so your beer will remain cold no matter how many kegs you're storing, high-quality easy to use digital thermostat, stainless steel interior with rubber floor mat, rolling casters, and the included KOMOS Dual Gauge CO2 regulator
Forward-sealing Stainless Faucets and Towers
All KOMOS kegerators come with NukaTap stainless steel forward-sealing faucets and a stainless steel draft tower. While other kegerator brands include basic, chrome-plated faucets and ABS plastic draft towers to reduce cost, KOMOS includes these premium upgrades as standard.
Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Most other kegerators on the market will include the cheapest, rear-sealing chrome-plated beer faucets that you'd find at any dive bar. KOMOS kegerators include not only a faucet that features superior pour technology, but made from stainless steel which won't corrode over years of use.
Choose from the classic forward-sealing faucet model or the upgraded flow control model that allows you to dial in the flow rate of the beverage you're dispensing. The flow control faucet is a great option for users that often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Instantly make adjustments as you pour to dial in the flow rate. This is also a super convenient feature for when you want to grab a quick growler on your way out. By dialing back the flow rate, you can gently fill your growler so CO2 stays in solution and your beer doesn't pour flat when it comes time to share.
Click here to learn more about the Classic and Flow Control faucet models.
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
KOMOS Regulator
The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line.
Added Features
All of that cooling power doesn't just keep your kegs cold thanks to the interior tower fan which blows cold air up into your towers to reduce foaming issues. The Olympus also comes standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China.
The recessed drip trays feature a built-in drain so spilled beer won't be hanging around in front of the draft towers. Tubing comes pre-installed and runs to an exterior bottom outlet that can be routed to a floor drain, or you can cut the tubing shorter on the inside and let the beer drain into a bucket. For home setups where a floor drain isn't an option, keeping the bucket inside the kegerator will keep it away from pesky fruit flies and other pests. And to keep everything in tip-top shape, the drip dray's grill is removable anytime you want to wipe down the reservoir or wash the grill.
Feature Summary:
Stainless Steel Air Cooled Towers
Stainless Steel NukaTap Forward-Sealing Faucets
Choose faucet model and number of taps above
Duotight Fittings make connecting draft lines a breeze
Easy to use digital temperature controller
Robust KOMOS Dual Gauge Regulator included
Commercial grade compressor uses R290 refrigerant
Beautiful stainless steel countertop style surface
All stainless steel exterior and interior with rubber floor mat
Recessed countertop style drip tray with built-in drain
Adjustable-height Rubber-coated stainless steel bottle racks
Heavy duty rolling casters come standard
Front and side facing ventilation for maximum cooling efficiency
Lock & key to keep your precious beverages protected
Interior lighting can be switched On/Off from the outside
Includes EVABarrier beer and gas tubing
Beverage line measures 4mm ID x 8mm OD
1 x 1.7m length of line per tap
Gas line measures 5mm ID x 8mm OD
1 x line of varying length depending on number of taps (2, 2.5, or 3m)
4 Tap towers includes uncut rolls of bev & gas line
We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.)
Gas lines can be cut to whatever length best suits your needs
Duotight adapters for draft shank and regulator connections
Duotight tee fittings for splitting gas lines (2-tap tower and higher only)
You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny
For ball lock and pin lock disconnects we recommend DUO106
For commercial sanke keg couplers we recommend DUO104
ETL Certified
Specifications:
90.875" Wide
27.75" Deep
36.75" Tall (fridge only)
40" Tall with Caster Wheels
+15.75" with 4-Tap Tower
+12.75" with 1 to 3-Tap Tower
115V - 60 hz
2.88 Amp draw
Internal Dimensions:
78" Wide
21.75" Deep
29.25" Tall
Door Frames - 28.75" H x 21" W
What Fits:
5 Gal. Slimline Torpedo Keg - 20
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 20
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 5
15.5 Gal. Half Barrel Keg (Full Size Keg) - 5
When choosing the number of taps you want, here is the tower configurations you'll receive.
Taps
Tower 1
Tower 2
2-Tap
Single
Single
3-Tap
Single
Double
4-Tap
Double
Double
5-Tap
Double
Triple
6-Tap
Triple
Triple
7-Tap
Triple
Quad
8-Tap
Quad
Quad
Detailed instructions for operating the temperature controller are included with the kegerator. For instructions on assembling the tower & line kits, please see pages 7-10 in the manual below.
Please note: The optimal conditions for this unit are an indoor environment with temperatures not exceeding 86°F and 55% relative humidity. If used outdoors or in an environment exceeding these conditions, note that the unit will operate for longer durations, and defrost cycles will vary based on temperature and humidity levels.
The KOMOS Olympus Kegerator was engineered with commercial use in mind, and easily stands up to the rigorous demands of a professional environment. That being said, this absolutely gorgeous kegerator will only enhance whatever room it finds itself in, whether that's the local taproom or your home bar. Features double-pane swinging glass doors with lock & key, recessed drip tray with pre-plumbed drain, adjustable height wire rack shelves, interior lighting, rubber floor mat, easy to use digital thermostat, and heavy duty rolling casters.
Please note the kegerator does not come with a plug for the tower holes. The Olympus is intended to be paired with standard 3" diameter draft towers or the KOMOS Quad Tap Tower kits.
Feature Summary:
Easy to use digital temperature controller
Commercial grade compressor uses R290 refrigerant
Tower cooling fan
Beautiful stainless steel countertop style surface
All stainless steel interior with rubber floor mat
Recessed countertop style drip tray with built-in drain
Adjustable-height Rubber-coated stainless steel bottle racks
Heavy duty rolling casters come standard
Front and side facing ventilation for maximum cooling efficiency
Lock & key to keep your precious beverages protected
Interior lighting can be switched On/Off from the outside
ETL Certified
CO2 Regulator, tower, draft lines not included
Specifications:
90.875" Wide
27.75" Deep
36.75" Tall (fridge only)
40" Tall with Caster Wheels
+15.75" with 4-Tap Tower
+12.75" with 1 to 3-Tap Tower
115V - 60 hz
2.88 Amp draw
Internal Dimensions:
78" Wide
21.75" Deep
29.25" Tall
Door Frames - 28.75" H x 21" W
What Fits:
5 Gal. Slimline Torpedo Keg - 20
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 20
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 5
15.5 Gal. Half Barrel Keg (Full Size Keg) - 5
Please note: The optimal conditions for this unit are an indoor environment with temperatures not exceeding 86°F and 55% relative humidity. If used outdoors or in an environment exceeding these conditions, note that the unit will operate for longer durations, and defrost cycles will vary based on temperature and humidity levels.
What makes KOMOS Kegerators better than the rest? Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits) Serve ice cold beer even in the warmest environments thanks to highly-efficient refrigeration components Stainless steel forward-sealing faucets offer a huge upgrade over common chrome plated brass taps Choose from the classic stainless model faucet or the upgraded stainless flow control model Faucets mount to a high-quality stainless steel tower, rather than a cheap chrome plated tower Interior fan diverts cold air up into the tower to keep your beer lines cold and reduce foaming EVABarrier double walled draft tubing protects your beer against oxidation Duotight push-to-connect fittings make assembly a breeze Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted The KOMOS® Deluxe Kegerator model features an eye-catching stainless steel exterior and upgraded stainless steel drip tray The KOMOS Kegerator offers a stunning set of features that clearly separate this unit as the most modern kegerator on the market. With more interior space than other models, the KOMOS Kegerator is designed to fit up to four 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. Whether you choose the single, double, triple, or quad tap configuration, you'll receive stainless steel forward-sealing faucets in either classic or flow control model. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Rather than a chrome plated tower, the NukaTap faucets are mounted to a stainless steel tower that remains cool before, during, and after each pour thanks to a tower fan diverter that recirculates cold air within the kegerator and blows it up into the tower to keep your beer lines cold and reduce foaming. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26–82°F, dual gas inlets at the back, aluminum internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator. The most eye-catching difference between the KOMOS unit and other kegerators is definitely the capacity. This is the first kegerator we have offered that comes with a quadruple tap tower option, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. KOMOS positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. Forward-sealing Stainless Faucets and Towers All KOMOS kegerators come with NukaTap stainless steel forward-sealing faucets and a stainless steel draft tower. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Most other kegerators on the market will only include the cheapest, standard chrome-plated beer faucets that you'd find at any dive bar. KOMOS kegerators include not only a faucet that features superior pour technology, but made from stainless steel which won't corrode over years of use. Choose from the classic forward-sealing faucet model or the upgraded flow control model that allows you to dial in the flow rate of the beverage you're dispensing. The flow control faucet is a great option for users that often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Instantly make adjustments as you pour to dial in the flow rate. This is also a super convenient feature for when you want to grab a quick growler on your way out. By dialing back the flow rate, you can gently fill your growler so CO2 stays in solution and your beer doesn't pour flat when it comes time to share. Click here to learn more about the Classic and Flow Control faucet models. Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. KOMOS Regulator The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus, you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Stainless Steel Air Cooled Tower NukaTap Stainless Steel Forward-Sealing Faucets Choose faucet model and number of taps above Duotight Fittings make connecting draft lines a breeze Digital Thermostat with wide 26 - 82° F temp range. Robust KOMOS Dual Gauge Regulator included CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless steel door, top cover, and side panels Stainless Countertop Style Drip Tray Aluminum floor for additional keg support Includes EVABarrier beer and gas tubing Beverage line measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line measures 5mm ID x 8mm OD 1 x line of varying length depending on number of taps (2, 2.5, or 3m) 4 Tap model includes uncut rolls of bev & gas line We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.) Gas lines can be cut to whatever length best suits your needs Duotight adapters for draft shank and regulator connections Duotight tee fittings for splitting gas lines (2, 3, 4 tap only) You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny For ball lock and pin lock disconnects we recommend DUO106 For commercial sanke keg couplers we recommend DUO104 Available Kegerator covers and "off road" casters for moving over uneven terrain Detailed instructions on assembly and use Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall (fridge only) 35" with Caster wheels 48.75" with tower 51" with Casters and Tower 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 6 Gal. Torpedo Keg - 3 5 Gal. Megamouth Torpedo Keg - 1 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 (1) 5.16 Gal. Sixth Barrel Keg + (1) 7.75 Gal. Slim Quarter Keg 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 See below for the Kegerator Instruction Manual. (The Deluxe Kegerator does not have feature a Guard Rail as seen in the residential kegerator instructions.) Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
Benchtop plate filter for wine or oil
Plates made from food-grade PPA
Built-in ENOS 20 centrifugal pump
Stainless ball valve and sample tap
280L/h wine filtering capacity
Made in Italy by EnoItalia
Benchtop style wine plate filter made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (10 plates). Includes ENOS 20 centrifugal pump.
Features:
Stainless ball valve
Stainless sample tap
Pressure gauge
Wine Capacity: 130-280 L/h (34-73 gal/h)
Oil Capacity: 130 L/h (34 gal/h)
Dimensions: 23.6" L x 12.9" W x 17.3" H
Weight: 64 lbs
110V
Coming soon! The 20-Plate 20x20 Plate Filter is now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is July 2026.
Rolling cart plate filter for wine or oil
Plates made from food-grade PPA
Built-in ENOS 20 centrifugal pump
Stainless ball valve and sample tap
900L/h wine filtering capacity
Made in Italy by EnoItalia
Made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (20 plates). Includes ENOS 20 pump with stainless body and impeller. Mounted to trolley cart with rolling casters.
Features:
Stainless ball valve
Stainless sample tap
Pressure gauge
Wine Capacity: 600-900 L/h (158-237 gal/h)
Oil Capacity: 600 L/h (158 gal/h)
Pump Barbs: 20 mm (0.78")
Dimensions: 23.6" L x 19.7" W x 29.5" H
Weight: 79 lbs
110V
Keep your catch of the day fresh with the Igloo® Marine Ultra 54 Quart Cooler. It’s designed with Ultratherm® insulation for optimal cooling performance and has an integrated fish ruler on the lid. The marine-grade design can withstand to the wet conditions and features rust-resistant stainless steel screws, ultraviolet inhibitors, and a stainless steel hinged latch.
Features:
Ultratherm® insulated lid offers cooling performance
Holds 83 cans
Features an integrated fish ruler on lid
Ultraviolet inhibitors protect the cooler against sun damage
Rust-resistant stainless steel screws and lid strap
Stainless steel hinged latch
Recessed triple-snap drain plug makes clean up simple
Marine-grade hinges
Non-slip grip handles provide comfortable carrying
Capacity: 54 Quart
Dimensions: 26.375” x 15.5” x 15.5”
Weight: 8.1 lbs.
Manufacturer’s warranty: 1-year
Country of Origin : United States of America
Style : 44683
DSG Pro Tips
Brand : Igloo
