Narrow 0-25 psi operating range allows for fine-tuning and accurate dispensing of carbonated beverages
Includes both Duotight and barb fittings for use with EVABarrier tubing or standard gas tubing
Features a shutoff valve for safe operation and standard US CO2 tank threads (CGA320)
Rubber gauge protectors safeguard gauges from potential damage
Compatible with standard US CO2 tanks
The KOMOS Dual Gauge Precision Dispensing Regulator provides precise control for dispensing carbonated beverages. Its narrow 0-25 psi operating range allows for finer pressure adjustments and greater accuracy compared to regulators with wider ranges. This design enables operators to easily fine-tune the output pressure within typical draft dispensing pressure settings.
The regulator includes both Duotight and barb fittings for compatibility with EVABarrier draft tubing and standard gas tubing. The gas outlet features a shutoff valve for safe and convenient operation. Rubber gauge protectors are also included to safeguard the gauges from potential damage.
Features:
0-25 PSI operating range
Low pressure gauge reads from 0-30 psi
Pull ring PRV rated to blow off at 25 psi
Narrow pressure range for increased precision
1/4" & 5/16" barb fittings included
Duotight adapter for EVABarrier tubing included
Standard US CO2 Threads (CGA320)
Shutoff valve
Gauge protectors
Ideal for dispensing carbonated beverages
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in early August.
Handles both dispensing and rapid burst carbonation, ideal for seltzers and high-carbonation drinks requiring 30-40 psi
Includes both Duotight and barb fittings for use with EVABarrier tubing or standard gas tubing
Features a shutoff valve for safe operation and standard US CO2 tank threads (CGA320)
Rubber gauge protectors safeguard gauges from potential damage
Compatible with standard US CO2 tanks
The KOMOS Dual Gauge Precision Universal Regulator is suitable for both dispensing and carbonating beverages. Compared to the Precision Dispensing model, the Universal model features a wider 0-50 psi operating range, enabling pressures above 25 psi for rapid burst carbonation. This is particularly useful for seltzer and other highly carbonated drinks requiring 30-40 psi dispensing pressure.
The regulator includes both Duotight and barb fittings for compatibility with EVABarrier draft tubing and standard gas tubing. The gas outlet features a shutoff valve for safe and convenient operation. Rubber gauge protectors are also included to safeguard the gauges from potential damage.
Features:
0-50 PSI operating range
Low pressure gauge reads from 0-60 psi
Pull ring PRV rated to blow off at 50 psi
Narrow pressure range for increased precision
1/4" & 5/16" barb fittings included
Duotight adapter for EVABarrier tubing included
Standard US CO2 Threads (CGA320)
Shutoff valve
Gauge protectors
Ideal for dispensing or carbonating beverages
The KOMOS Wine Kegerator is nearly identical to it's beer-serving brethren, with one key difference—this unit comes ready for use with Nitrogen gas. Each kegerator includes an adapter to use the KOMOS CO2 regulator with a Nitrogen gas cylinder, allowing you to serve from a keg without carbonating the wine. This is a perfect option for winemakers that like the appeal of packaging their wine into a single vessel, and want to enjoy a single glass (or several) without opening a bottle.
Serving with Nitrogen
Draft systems are an under-utilized convenience in the winemaking world, and perhaps that's due to fact that most home draft systems on the market are set up to use Carbon Dioxide. CO2 is used in everything from beer to soda pop to give it that signature effervescence. Most styles of wine, of course, are served flat, and pushing wine through a draft system with CO2 will eventually carbonate the wine. Nitrogen, on the other hand, will not dissolve into solution the same way CO2 does, and will have no effect on the wine. With the same homebrew-style "Corny" kegs that brewers use, you can package your finished batch of wine in one or multiple kegs, and enjoy the pleasure of pouring yourself a glass straight from the tap.
The KOMOS Wine Kegerator is not limited to just wine. You can mix and match the lines to serve a variety of beverages. Nitrogen is also perfect for cold brew coffee or stout beers, and with a separate CO2 tank and additional regulator, you can serve carbonated beverages like beer, seltzer, or soda.
Please note that the kegerator only includes one regulator and does not include a nitrogen cylinder. An empty nitrogen tank can be added to your order above. If you plan to use two different types of gas, you will need to purchase a second regulator and gas cylinder.
NukaTap Forward Sealing Faucets
NukaTap is the newest brand of forward sealing faucets that boast a lower thermal mass for reduced first pour foam. They feature a "nuke-shaped" internal shuttle that is made from TPV, which provides superior laminar flow to further reduce foaming issues. If you prefer all stainless steel components in your beer faucet, we would suggest the kegerator configuration that comes with Intertap faucets. All faucet spout attachments and accessories are cross compatible between Intertap and NukaTap.
KOMOS Kegerator
The KOMOS Kegerator offers a stunning set of features that clearly separate this unit as the most modern kegerator on the market. With more interior space than other models, the KOMOS Kegerator is designed to fit up to four 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. Whether you choose the single, double, triple, or quad tap configuration, you'll receive NukaTap stainless steel faucets, the newest in forward-sealing faucet design. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Rather than a chrome plated tower, the NukaTap faucets are mounted to a stainless steel tower that remains cool before, during, and after each pour thanks to a tower fan diverter that recirculates cold air within the kegerator and blows it up into the tower to keep your beer lines cold and reduce foaming. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26–82°F, dual gas inlets at the back, aluminum internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator.
The most eye-catching difference between the KOMOS unit and other kegerators is definitely the capacity. This is the first kegerator we have offered that comes with a quadruple tap tower option, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. KOMOS positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs.
Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines.
Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines.
Extra Wide Temperature Range is Perfect for Homebrewers
The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice.
NukaTap Stainless Faucets and Towers
All kegerators come with either NukaTap faucets for mounting on the stainless tower. NukaTap is the newest brand of forward sealing faucets that boast a lower thermal mass for reduced first pour foam. They feature a "nuke-shaped" internal shuttle that is made from TPV, which provides superior laminar flow to further reduce foaming issues. If you prefer all stainless steel components in your beer faucet, we would suggest the kegerator configuration that comes with Intertap faucets. All faucet spout attachments and accessories are cross compatible between Intertap and NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. The modular, threaded spout can fit a variety of attachments including a growler filler or stout spout. This model includes the all stainless faucet which we think is a must have upgrade over chrome plated brass.
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
KOMOS Regulator
The included high quality KOMOS regulator maintains consistent pressure. The regulator includes a blow-off PRV with pull ring for safety and relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line.
Added Features
One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China.
The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Best Value & Backed by MoreBeer!
We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it.
Feature Summary:
Stainless Steel Forward-Sealing Faucets (choose number of taps above)
Stout Spouts and Standard Spouts for each faucet
Robust KOMOS Dual Gauge CO2 Regulator with included Nitrogen tank adapter
Stainless Steel Air Cooled Tower
Duotight Fittings make connecting draft lines a breeze
Digital Thermostat with wide 26 - 82° F temp range.
CO2 Tank holder mounts on back of kegerator (tank not included)
Efficient and powerful compressor
Stainless Steel Door
Countertop Style Drip Tray
Aluminum floor for additional keg support
Includes EVABarrier beer and gas tubing
Beverage line measures 4mm ID x 8mm OD
1 x 1.7m length of line per tap
Gas line measures 5mm ID x 8mm OD
1 x line of varying length depending on number of taps (2, 2.5, or 3m)
4 Tap model includes uncut rolls of bev & gas line
We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.)
Gas lines can be cut to whatever length best suits your needs
Duotight adapters for draft shank and regulator connections
Duotight tee fittings for splitting gas lines (2, 3, 4 tap only)
You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny
For ball lock and pin lock disconnects we recommend DUO106
For commercial sanke keg couplers we recommend DUO104
Available Kegerator covers and "off road" casters for moving over uneven terrain
Detailed instructions on assembly and use
Specifications:
23.75" wide
25" deep
31.5" with CO2 mount
32.5" Tall (fridge only)
35" with Caster wheels
48.75" with tower
51" with Casters and Tower
110 v - 60 hz
0.8 Amp draw
Optimal ambient temperature is 65°F – 80°F
CSA Certified
Internal Dimensions:
19.5" wide
17" deep
16" down the center where compressor sits
28.5" tall
What Fits:
5 Gal. Torpedo Keg - 3
5 Gal. Slimline Torpedo Keg - 4
6 Gal. Torpedo Keg - 3
5 Gal. Megamouth Torpedo Keg - 1
5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4
5.2 Gal. Oxebar PET Keg - 3
5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1
7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1
15.5 Gal. Half Barrel Keg (Full Size Keg) - 1
See below for the Kegerator Instruction Manual.
Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
Adapt 1/4" male pipe thread to 1/4" male flare thread, making any 1/4" FPT fitting compatible with flare fittings or flare threaded Duotight fittings.
Made from chrome plated brass.
All the parts and seals you need to rebuild a keg in one convenient kit!
Includes Low2 Keg Lid O-rings that offer superior defense from oxygen ingress compared to silicone or EPDM rings
Never fear gasket failures when you go to fill your ball lock keg—this first aid kit has everything you could possibly need
Comes in a convenient, well-organized tackle box tray so you never need to go searching for that tiny replacement O-ring
Also includes tailpiece gaskets for keg couplers or draft shanks and nylon washers for KOMOS CO2 Regulators
$100 value! Save money by not purchasing all of these parts individually
The KOMOS First Aid Kit comes with all the parts needed to fully rebuild a ball lock keg and more! Don't wait for gaskets to wear down and start leaking before buying a replacement—keep this replacement part kit on hand and be ready for any situation. It's only a matter of time before keg seals fail, and when that time comes, the last thing you want to do is comb through a drawer of random gaskets for that tiny, little lifesaver. Having all your gaskets in one convenient tackle box will give you the peace of mind that you'll always be able to get your keg back in working order in no time flat.
Low2 O-rings are cutting edge blend of plastic material (Synthetic M-Class and Cross-Linked Elastomers) that provide the best protection against oxygen ingress ever seen on the homebrew market. Even in a fully pressurized, sealed keg, it's possible for oxygen to dissolve in through the gap where the keg lid and O-ring form a seal. This tiny amount of oxygen ingress over time will eventually affect all beers, but is especially detrimental to highly oxygen-sensitive beers like Hazy IPAs.
In addition to ball lock keg parts, tailpiece gaskets for draft shanks or keg couplers and regulator nylon washers for KOMOS CO2 Regulators are also included.
The Ball Lock Keg First Aid Kit also represents an incredible value and will save you a ton of money in the long run. Buying all of the parts in this kit individually would run you upwards of $100, but you can get them all in one purchase at a fraction of that price.
Includes:
(1) Ball Lock Post – Gas In
(1) Ball Lock Post – Bev Out
(2) Keg Lid O-Ring
(2) Keg Lid Pull Ring PRV
(2) CO2 Regulator Nylon Washer
(4) Keg Lid Foot
(4) Tailpiece Gasket
(6) Universal Poppet
(10) Dip Tube O-Ring
(20) Ball Lock Post O-Ring
Replacement keg posts (body connects) for ball lock homebrew kegs. Bev Out side.
This piece is where ball lock quick disconnects attach to your homebrew keg. The Bev Out post is identified by the smooth sides around the base whereas the Gas In post is notched. Made from stainless steel.
Comes in a convenient zip lock bag.
Replacement keg posts (body connects) for ball lock homebrew kegs. Gas In side.
This piece is where ball lock quick disconnects attach to your homebrew keg. The Gas In post is identified by the small notches around the base whereas the Bev Out post is smooth. Made from stainless steel.
Comes in a convenient zip lock bag.
5-gallon Ball Lock Keg made from beverage-grade 304 stainless steel.
Ideal for beer, cider, kombucha, cold-brew coffee or any other beverage you want to serve on draft.
Single steel handle provides easy mobility while keeping the in & out posts clear for connection.
Rubber boot bottom won't scratch up the floor of your kitchen or home bar area.
Manufactured in an ISO 9001-certified facility with robotically welded seams for superior quality.
The KOMOS Homebrew keg is the perfect option for beer, cold brew coffee, kombucha, cider, or any other beverage you want to serve your home bar patrons on draft. These ball lock kegs are built in an ISO 9001-certified facility and made from beverage-grade 304 stainless steel with robotically welded seams. The single steel handle is positioned away from the ball lock posts, so you'll never have trouble connecting or routing your draft lines. The rubber boot bottom allows you to move your kegs around without fear of scratching up your floors, which is especially nice if your kegerator setup is on hardwood floors, and they can be stacked on top of other homebrew kegs with a rubber top. Comes with a standard corny keg lid with pull ring PRV, providing both manual and automatic pressure relief.
Specifications:
Max Pressure: 130 psi
PRV Rating: 85 psi
High Quality Laser Welded Seams
Single Ergonomic Steel Handle
Rubber Boot Bottom
ISO9001 Quality Assurance
NSF Approved
Made from 304 Stainless Steel
25.25" H x 8.75" D
Chrome plated brass shank comes with a back nut, plastic collar, and a welded 3/16" nipple. This beer shank is a popular choice for building your own custom draft system. Typically installed in the door of a refrigerator or the wooden collar of a converted chest freezer.
The shank’s listed size refers to the total length of threaded pipe. Approximately 1-1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project.
Installation Note: On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.
Dimensions:
4-1/4" - Total Length (Tip to Tip)
3-1/2" - Shank Length (Without Nipple)
2-5/8" - Thread Length
2-3/8" - Pass Through Length
3/16'' - Bore
Don't let fruit flies invade your you beer taps in between uses. Slip on this rubber cap to keep bugs out and drips off your floor or counter.
Pack of 4.
For repairing a broken tap handle of building one from scratch. The tap ferrule is the piece you'll see at the bottom of most tap handles and is where the handle is screwed onto the faucet lever. You will also need hanger bolts (D2532) to screw the ferrule into a wood tap handle.
5/16" top threads and 3/8" bottom threads.
Pack of 5. Comes in a convenient zip lock bag.
Shutoff check valves can be used in multiple gas applications. Commonly added to CO2 regulators or manifolds to protect your equipment from back flow. 1/4" NPT check valve with 1/4" barb. Use with 3/16" or 1/4" ID gas line.
Shutoff check valves can be used in multiple gas applications. Commonly added to CO2 regulators or manifolds to protect your equipment from back flow. 1/4" NPT check valve with 1/4" barb. Use with 1/4" or 5/16" ID gas line.
This compression style fiber washers are a must if you use regulator that requires a gasket change everytime you change the tank. Comes in a convenient zip lock bag. NOTE: These are not intended for use with the KOMOS CO2 Regulator. For the correct KOMOS Regulator replacement gasket, please see D1089.
Silicone regulator stem o-ring. Commonly used on Taprite regulators which have an o-ring located where the regulator stem mates with the CO2 cylinder. Comes in a convenient zip lock bag. NOTE: These are not intended for use with the KOMOS CO2 Regulator. For the correct KOMOS Regulator replacement gasket, please see D1089.
Instant Identification: Color-coded (Red for Gas, Yellow for Beverage) for quick post recognition.
Universal Compatibility: Fits both ball lock and pin lock homebrew keg posts.
Secure Seal: Made from silicone for superb malleability and spring back memory performance.
Universal keg post O-rings can be used with both ball lock and pin lock homebrew kegs. These O-rings go on the outside of your homebrew keg posts (also referred to as body connects) which is where you connect your ball lock or pinlock quick disconnects. Use Red for Gas-In and Yellow for Bev-Out to quickly and easily identify your posts.
Dip tube o-rings compatible with all homebrew ball lock or pin lock kegs. Slide the o-ring onto the dip tube and then place the dip tube back in the keg.
Comes in a convenient zip lock bag.
Put your ball lock or pin lock homebrew keg back into perfect working order with the KOMOS corny keg rebuild kit. Includes brand new o-rings for the keg lid, dip tubes, and keg posts / body connects.
Comes in a convenient zip lock bag.
These 5/8" EPDM gaskets are used anywhere you're mounting a tailpiece. This could be on the back of your draft faucet shank or on either port of a commercial keg coupler.
Comes in a convenient zip lock bag.
5/16 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. The barb is made from stainless steel. The nut is made from nickel plated brass.
Comes in a convenient zip lock bag.
Swivel nut for 1/4 in. flare fitting connections. For use with 1/4 in. barbs (KEG1108). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Made from nickel plated brass. Comes in a convenient zip lock bag.
Swivel nut for 1/4 in. flare fitting connections. For use with 5/16 in. barbs (KEG1109). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Made from nickel plated brass. Comes in a convenient zip lock bag.
Stainless steel 1/4 in. barb for flare fitting connections. For use with 1/4 in. swivel nut (KEG1106 or KEG1107). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Comes in a convenient zip lock bag.
Stainless steel swivel nut for 1/4 in. flare fitting connections. For use with 1/4 in. barbs (KEG1108). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Comes in a convenient zip lock bag.
Stainless steel 5/16 in. barb for flare fitting connections. For use with 1/4 in. swivel nut (KEG1110). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Comes in a convenient zip lock bag.
This stainless pressure relief valve offers precise control and easy to adjust. The elongated body provides room for a taller spring to make small adjustments more accurate. Tune in the pressure setting from 0 to 30 psi using the knurled adjustment knob. 1/4" male pipe thread.
This dual sided screw has one side which goes into a Faucet Tap Ferrule and the other is a wood screw to go into a wooden tap handle. Perfect for creating your own custom handles. 5/16-18 thread.
Comes in a convenient zip lock bag.
This handy tool is inserted into the bottom of your keg coupler to lift the ball check valve, allowing you to flush cleaning solution through from the tap without needing to disassemble the keg coupler. A simple solution to save you time while cleaning draft lines.
Comes in a convenient zip lock bag.
Replacement gaskets and o-rings for standard US keg couplers (D-Style) and European keg couplers (S-Style). Other than the probe washer, they use the same gaskets and check valves.
Nylon washers are used to create a seal between metal-to-metal 1/4" flare fitting connections. Most often used with stainless steel ball lock quick disconnects to prevent leaks. These washers are not necessary when connecting female flare fittings to plastic male flare QDs that have a plastic washer built-in.
Flare washers are easy to misplace so we always recommend keeping spares on hand.
Comes in a convenient zip lock bag.
Replacement internal o-ring gasket for ball lock or pin lock quick disconnects. This flat washer fits inside the body of the QD when you unscrew the top port.
Comes in a convenient zip lock bag.
This replacement gasket installs on the backside of your faucet. Seals between where the faucet and the draft shank connect.
Comes in a convenient zip lock bag.
Replacement o-ring for Universal Poppets. The poppet is the piece inside a ball lock or pin lock keg post that interfaces with homebrew keg quick disconnects.
Comes in a convenient zip lock bag.
Replace a missing or damaged gas-in check valve on your Sanke Coupler. This one way gas bladder prevents beer from back-flowing up your gas line and into your regulator where it could cause damage.
Comes in a convenient zip lock bag.
These 5/8" silicone gaskets are used anywhere you're mounting a tailpiece. This could be on the back of your draft faucet shank or on either port of a commercial keg coupler.
Comes in a convenient zip lock bag.
Stainless steel shank comes with a back nut, plastic collar, and a 3/16" tailpiece with hex nut and gasket. If desired, the barb can be removed and swapped for a different size or replaced with a Duotight x Beer Thread Adapter. This size of beer shank is a popular choice for building your own custom draft system. Typically installed in the door of a refrigerator or the wooden collar of a converted chest freezer. The shank’s listed size refers to the total length of threaded pipe. Approximately 1-1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project. Installation Note: On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 4-1/4" - Total Length (Tip to Tip) 3-1/8" - Shank Length (Without Nut & Nipple) 2-1/4" - Thread Length 1-3/4" - Pass Through Length 3/16" Nipple
Convert draft shanks or keg couplers for use with 1/2" female threaded fittings. Featuring a hex nut exterior for easy wrench adjustments. The female side is standard Beer Thread (5/8" BSP) which is used on both ports of standard keg couplers and the tail end of draft shanks. Once installed, you can adapt these input/output ports to any 1/2" fittings and valves you might find useful.
The 1/2" male BSP end may require teflon tape if used with 1/2" NPT fittings.
Made from 304 stainless steel.
These stainless steel butterfly hose clamps are the ideal choice for connecting silicone tubing to quick disconnects, pumps, and more. The butterfly thumb screw allows for toolless tightening and untightening, so you can build out or break down your system without rummaging through the toolbox for the right screwdriver.
Fits 1/2 in. OD to 1 in. OD tubing. Actual size of the clamp is 14-25 mm (0.55-0.98 in.).
Comes in a convenient zip lock bag.
1/4 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Plastic quick disconnects (QDs) on the other hand, have a built-in washer so the additional nylon flare washer is not needed. The barb and nut are both made from stainless steel. We recommend using 3/16" ID tubing for a tight fit.
Stainless steel joiner fitting for joining multiple lengths of tubing. Recommended for 3/8" to 1/2" ID tubing. The barbs are slightly oversized at 13 mm (0.51").
Made from 304 stainless steel.
Stainless steel joiner fitting for joining multiple lengths of tubing. Recommended for 3/16" to 1/4" ID tubing. The barbs are slightly undersized at 6 mm (0.24").
Made from 304 stainless steel.
Stainless steel joiner fitting for joining multiple lengths of tubing. Recommended for 3/8" ID tubing. The barbs are slightly oversized at 10 mm (0.39") which will give you a tighter fit when using 3/8" ID tubing.
Made from 304 stainless steel.
Stainless steel splicer fitting for joining different sizes of tubing. Recommended for splicing 3/16" or 1/4" ID tubing to 3/8" or 1/2" ID tubing. One end is slightly undersized at 6 mm (0.24") and the other is slightly oversized at 13 mm (0.51").
Made from 304 stainless steel.
