Designed for use with the EnoItalia Tank Washing System. This stainless steel washing slide is a great option for tanks with manway doors that do not have a built-in spray ball for CIP. Place the washing slide inside your tank and snake the tubing through the maway door. Connect the washing slide to your pump's outflow and the bottom drain of the tank to the pump's inflow to create a cleaning circuit. Recommended for use with the EnoItalia High-Pressure Centrifugal Pump.
1.5" T.C. inlet connection.
Portable, benchtop gravity-style wine bottle filler Four filling heads made from stainless steel are removable for easy cleaning All parts that come into contact with wine are made from stainless steel Level gauge located at the front of the 45L reservoir Fill up to 65 cases of 750ml bottles per hour Made in Italy by EnoItalia The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery or avid home winemaker. Features four filling heads and stainless steel construction. Fill up to 65 cases of 750ml bottles per hour. Compared to units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger, which speeds filling. The fill head is also easier to adjust for various bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. This unit is also available with Electronic Level Sensor and Nitrogen Injector (WE254). Features:
Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located at the front of the reservoir 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gas removal from the bottle for a faster fill rate 670L per hour fill rate 45L reservoir 84 pounds 42" H x 23" W x 20" D Please Note This filler is not equipped with a float valve in the reservoir, as the majority of our customers supply the filler via a pump, and the float valve will not stop the flow from a running pump.
Portable, benchtop gravity-style wine bottle filler Six filling heads made from stainless steel are removable for easy cleaning All parts that come into contact with wine are made from stainless steel Level gauge located at the front of the 66L reservoir Fill up to 100 cases of 750ml bottles per hour Made in Italy by EnoItalia The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery or avid home winemaker. Features six filling heads and stainless steel construction. Fill up to 100 cases of 750ml bottles per hour. Compared to units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger, which speeds filling. The fill head is also easier to adjust for for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. This unit is also available with Electronic Level Sensor and Nitrogen Injector (WE258). Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located at the front of the reservoir 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gas removal from the bottle for a faster fill rate 980L per hour fill rate 66L reservoir 110 pounds 42" H x 34" W x 20" D Please note: the example photo shows the 4-spout version of the bottle filler. Please Note This filler is not equipped with a float valve in the reservoir, as the majority of our customers supply the filler via a pump, and the float valve will not stop the flow from a running pump.
The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery. Features six filling heads and stainless steel construction. This a complete bottle filling solution that comes on cart and includes built in pump, electronic float switch, and electric valve. As the wine level drops in the reservoir the pump is turned on to refill. Electric valve keeps wine from being siphoned back out of reservoir. Fill up to 100 cases of 750ml bottles per hour. If you do not have the human power to keep up you can use 4 heads at a time so there is no disadvantage to getting a 6 head filler vs a 4 head filler. We only offer the 6 head filler in this model because the price is very similar between 4 and 6. Unlike units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger which speeds filling. The fill head is also easier to adjust for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located on the side of the reservoir Built-in rubber impeller pump with 1.5" T.C. inlet/outlet Rubber impeller pump built-in Electronic float control Electronic shut-off valve On 4" casters with brake 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gasremoval from the bottle for a faster fill rate 980L per hour fill rate 55L reservoir Can fill bottles up to 22" tall 200 pounds 71" T x 34"w x 26" D 110V Please note: The integrated pump is hardwired into the panel. It cannot be disconnected and used separately as it appears in the photo.
The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery. Features six filling heads and stainless steel construction. This a complete bottle filling solution that comes on cart and includes built in pump, electronic float switch, and electric valve. As the wine level drops in the reservoir the pump is turned on to refill. Electric valve keeps wine from being siphoned back out of reservoir. Fill up to 100 cases of 750ml bottles per hour. If you do not have the human power to keep up you can use 4 heads at a time so there is no disadvantage to getting a 6 head filler vs a 4 head filler. We only offer the 6 head filler in this model because the price is very similar between 4 and 6. Unlike units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger which speeds filling. The fill head is also easier to adjust for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located on the side of the reservoir Built-in rubber impeller pump with 1.5" T.C. inlet/outlet Rubber impeller pump built-in Electronic float control Electronic shut-off valve On 4" casters with brake 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gasremoval from the bottle for a faster fill rate 980L per hour fill rate 55L reservoir Can fill bottles up to 22" tall 200 pounds 71" T x 34"w x 26" D Runs on 220V Power, and comes with a bare cord. You will need an electrician to come and wire the appropriate plug.
The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery or avid home winemaker. Features six filling heads and stainless steel construction. Included 4" casters make this unit very easy to move around. Fill up to 100 cases of 750ml bottles per hour. If you do not have the human power to keep up you can use 4 heads at a time so there is no disadvantage to getting a 6 head filler versus a 4 head filler. We only offer the 6 head filler in this model because the price is very similar between 4 and 6. Compared to units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger, which speeds filling. The fill head is also easier to adjust for for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. Features:
Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located at the front of the reservoir Included 4" casters with brake 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gas removal from the bottle for a faster fill rate 980L per hour fill rate 55L reservoir Can fill bottles up to 22" tall 180 pounds 71" H x 34" W x 26" D
Vacuum bottle filler for use with wine, olive oil, or uncarbonated beer
Air is cleared from each bottle before filling, reducing oxygen exposure
Adjustable fill nozzles and support rack to fit your bottle size and fill level
Variable fill speed to match your bottling pace
High-quality 304 stainless steel construction
Made in Italy by EnoItalia
We like this robust vacuum filler from EnoItalia because it combines the low oxygen benefits of vacuum filling with the strong fill nozzles and frame of traditional Italian bottle fillers.
This high-quality vacuum filler is the ideal choice for bottling uncarbonated beer or wine with minimal oxygen exposure. Air from the bottle is automatically extracted through the filling head and then liquid is drawn through the system and into the bottle via a vacuum pump. This greatly reduces the oxygen exposure that occurs with other fillers. The support rack and fill nozzles are adjustable so you can adapt it for your bottle size and desired fill level. Fill speed can also be adjusted with the digital display and vacuum regulator, allowing you to quickly set the desired vacuum level for each product. After each bottle is filled, excess liquid is returned to the cylinder. When the cylinder fills up, the stainless steel float will rise and shut off the vacuum pump.
Designed entirely in stainless steel with high-quality components, this filler was designed to stand up to intensive, professional-level use.
This unit is only intended for use with still beverages. It is not compatible with carbonated beer, cider, or sparkling wine.
Features:
304 stainless steel construction
Digital adjustment display
1.5" tri-clamp for product aspiration and circuit emptying
DIN 15 connections for emptying filling nozzles
Adjustable support rack
Adjustable feet
Lifting handles
Capacity: 650 lt/h (171 gal/h)
Power: 110V / 60 hz
Please note: this unit comes with a bare cord. You will need an electrician to wire the appropriate plug.
Vacuum bottle filler for use with wine, olive oil, or uncarbonated beer
Air is cleared from each bottle before filling, reducing oxygen exposure
Adjustable fill nozzles and support rack to fit your bottle size and fill level
Variable fill speed to match your bottling pace
High-quality 304 stainless steel construction
Made in Italy by EnoItalia
We like this robust vacuum filler from EnoItalia because it combines the low oxygen benefits of vacuum filling with the strong fill nozzles and frame of traditional Italian bottle fillers.
This high-quality vacuum filler is the ideal choice for bottling uncarbonated beer or wine with minimal oxygen exposure. Air from the bottle is automatically extracted through the filling head and then liquid is drawn through the system and into the bottle via a vacuum pump. This greatly reduces the oxygen exposure that occurs with other fillers. The support rack and fill nozzles are adjustable so you can adapt it for your bottle size and desired fill level. Fill speed can also be adjusted with the digital display and vacuum regulator, allowing you to quickly set the desired vacuum level for each product. After each bottle is filled, excess liquid is returned to the cylinder. When the cylinder fills up, the stainless steel float will rise and shut off the vacuum pump.
Designed entirely in stainless steel with high-quality components, this filler was designed to stand up to intensive, professional-level use.
This unit is only intended for use with still beverages. It is not compatible with carbonated beer, cider, or sparkling wine.
Features:
304 stainless steel construction
Digital adjustment display
1.5" tri-clamp for product aspiration and circuit emptying
DIN 15 connections for emptying filling nozzles
Adjustable support rack
Adjustable feet
Lifting handles
Capacity: 650 lt/h (171 gal/h)
Power: 110V / 60 hz
Please note: this unit comes with a bare cord. You will need an electrician to wire the appropriate plug.
Benchtop plate filter for wine or oil
Plates made from food-grade PPA
Built-in ENOS 20 centrifugal pump
Stainless ball valve and sample tap
280L/h wine filtering capacity
Made in Italy by EnoItalia
Benchtop style wine plate filter made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (10 plates). Includes ENOS 20 centrifugal pump.
Features:
Stainless ball valve
Stainless sample tap
Pressure gauge
Wine Capacity: 130-280 L/h (34-73 gal/h)
Oil Capacity: 130 L/h (34 gal/h)
Dimensions: 23.6" L x 12.9" W x 17.3" H
Weight: 64 lbs
110V
Benchtop plate filter for wine or oil
Plates made from food-grade PPA
Built-in ENOS 20 centrifugal pump
Stainless ball valve and sample tap
280L/h wine filtering capacity
Made in Italy by EnoItalia
Benchtop style wine plate filter made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (10 plates). Includes ENOS 20 centrifugal pump.
Features:
Stainless ball valve
Stainless sample tap
Pressure gauge
220V single phase Input Voltage Required
Bare Cord for wiring with the appropriate plug
Wine Capacity: 130-280 L/h (34-73 gal/h)
Oil Capacity: 130 L/h (34 gal/h)
Dimensions: 23.6" L x 12.9" W x 17.3" H
Weight: 64 lbs
Please Note: This item may come with a bare cord or with a European style plug. You will need a professional electrician to wire the pump with the appropriate plug.
Rolling cart plate filter for wine or oil
Plates made from food-grade PPA
Built-in ENOS 20 centrifugal pump
Stainless ball valve and sample tap
280L/h wine filtering capacity
Made in Italy by EnoItalia
Made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (10 plates). Includes ENOS 20 pump with stainless body and impeller. Mounted to trolley cart with rolling casters.
Features:
Stainless ball valve
Stainless sample tap
Pressure gauge
Wine Capacity: 130-280 L/h (34-73 gal/h)
Oil Capacity: 130 L/h (34 gal/h)
Pump Barbs: 20 mm (0.78")
Dimensions: 23.6" L x 19.7" W x 29.5" H
Weight: 70.5 lbs
110V
Rolling cart plate filter for wine or oil
Plates made from food-grade PPA
Built-in ENOS 20 centrifugal pump
Stainless ball valve and sample tap
280L/h wine filtering capacity
Made in Italy by EnoItalia
Made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (10 plates). Includes ENOS 20 pump with stainless body and impeller. Mounted to trolley cart with rolling casters.
Features:
Stainless ball valve
Stainless sample tap
Pressure gauge
220V single phase Input Voltage Required
Wired with European-style 2-prong plug*
Wine Capacity: 130-280 L/h (34-73 gal/h)
Oil Capacity: 130 L/h (34 gal/h)
Pump Barbs: 20 mm (0.78")
Dimensions: 23.6" L x 19.7" W x 29.5" H
Weight: 70.5 lbs
*You will need a certified electrician to re-wire the unit with the appropriate 220V plug. 20 Plate unit pictured.
Coming soon! The 20-Plate 20x20 Plate Filter is now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is July 2026.
Rolling cart plate filter for wine or oil
Plates made from food-grade PPA
Built-in ENOS 20 centrifugal pump
Stainless ball valve and sample tap
900L/h wine filtering capacity
Made in Italy by EnoItalia
Made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (20 plates). Includes ENOS 20 pump with stainless body and impeller. Mounted to trolley cart with rolling casters.
Features:
Stainless ball valve
Stainless sample tap
Pressure gauge
Wine Capacity: 600-900 L/h (158-237 gal/h)
Oil Capacity: 600 L/h (158 gal/h)
Pump Barbs: 20 mm (0.78")
Dimensions: 23.6" L x 19.7" W x 29.5" H
Weight: 79 lbs
110V
Rolling cart plate filter for wine or oil
Plates made from food-grade PPA
Built-in ENOS 20 centrifugal pump
Stainless ball valve and sample tap
900L/h wine filtering capacity
Made in Italy by EnoItalia
Made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (20 plates). Includes ENOS 20 pump with stainless body and impeller. Mounted to trolley cart with rolling casters.
Features:
Stainless ball valve
Stainless sample tap
Pressure gauge
220V single phase Input Voltage Required
Wired with European-style 2-prong plug*
Wine Capacity: 600-900 L/h (158-237 gal/h)
Oil Capacity: 600 L/h (158 gal/h)
Pump Barbs: 20 mm (0.78")
Dimensions: 23.6" L x 19.7" W x 29.5" H
Weight: 79 lbs
*You will need a certified electrician to re-wire the unit with the appropriate 220V plug.
New – Cosmetic Defect
This unit is new. It is in new and good condition but has cosmetic defect(s) such as scratch(es), dent(s), and/or has damaged packaging
Rolling cart plate filter for wine or oil
Plates made from food-grade PPA
Built-in ENOS 20 centrifugal pump
Stainless ball valve and sample tap
900L/h wine filtering capacity
Made in Italy by EnoItalia
Made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (20 plates). Includes ENOS 20 pump with stainless body and impeller. Mounted to trolley cart with rolling casters.
Features:
Stainless ball valve
Stainless sample tap
Pressure gauge
220V single phase Input Voltage Required
Wired with European-style 2-prong plug*
Wine Capacity: 600-900 L/h (158-237 gal/h)
Oil Capacity: 600 L/h (158 gal/h)
Pump Barbs: 20 mm (0.78")
Dimensions: 23.6" L x 19.7" W x 29.5" H
Weight: 79 lbs
*You will need a certified electrician to re-wire the unit with the appropriate 220V plug.
Coming soon! The 40-Plate 20x20 Plate Filter is now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is August 2026.
Rolling cart plate filter for wine or oil
Plates made from food-grade PPA
Built-in ENOS 20 centrifugal pump
Stainless ball valve and sample tap
1,500L/h wine filtering capacity
Made in Italy by EnoItalia
Made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (40 plates). Includes EURO 20 flexible impeller pump. Mounted to trolley cart with rolling casters.
Features:
Stainless ball valve
Stainless sample tap
Pressure gauge
Wine Capacity: 900-1500 L/h (237-396 gal/h)
Oil Capacity: 900 L/h (237 gal/h)
Pump Barbs: 20 mm (0.78")
Dimensions: 23.6" L x 19.7" W x 29.5" H
Weight: 108 lbs
110V
Rolling cart plate filter for wine or oil
Plates made from food-grade PPA
Built-in ENOS 20 centrifugal pump
Stainless ball valve and sample tap
1,500L/h wine filtering capacity
Made in Italy by EnoItalia
Made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (40 plates). Includes EURO 20 flexible impeller pump. Mounted to trolley cart with rolling casters.
Features:
Stainless ball valve
Stainless sample tap
Pressure gauge
220V single phase Input Voltage Required
Wired with European-style 2-prong plug*
Wine Capacity: 900-1500 L/h (237-396 gal/h)
Oil Capacity: 900 L/h (237 gal/h)
Pump Barbs: 20 mm (0.78")
Dimensions: 23.6" L x 19.7" W x 29.5" H
Weight: 108 lbs
*You will need a certified electrician to re-wire the unit with the appropriate 220V plug. 20 Plate unit pictured.
Gently mix yeast, sulphite, and additives into your wine with this variable speed mixer. The stainless cart allows you to move the mixer up and down to the height of your tank fitting. Also adjust the angle of the mixer to accomodate inclined, reinforced mixing ports, like on our Speidel Stainless tanks.
The included pump is a very unique feature that allows you to pump a slurry out of a bucket, into the mixer and into the tank. This saves time by not having to open the top hatch, reduces possible oxidation, and ensures a better mix.
How to Use
Mixing ports enter through full port 2" TC ball valves to allow for an easily installation and disassembly. Position and attach the mixer to your 2" TC ball valve. Open the valve and slide in the adjustable mixing shaft, lock the shaft in position, and turn on. Adjust the speed to accomodate your desired level of agitation. To remove unlock shaft, slide out, turn off TC ball valve, and then disconnect mixer from TC ball valve.
For Use in Beer:
Wine tank mixers are perfect for mixing hops during dry hopping operations. Their use decreases the time needed to extract hop oils and lowers the amount of hops needed to get the same dry hopping level. This requires a horizontal port with a full port ball vale on the tank.
Features:
All parts in contact with the liquid are made of stainless steel AISI 304.
0.75 kw power, speed 0-1400 RPM
Euro 20 pump included
Single phase power supply
Rod length 650 mm
Width 155 mm propeller
Stainless cart
Gently mix yeast, sulphite, and additives into your wine with this variable speed mixer. The stainless cart allows you to move the mixer up and down to the height of your tank fitting. Also adjust the angle of the mixer to accomodate inclined, reinforced mixing ports, like on our Speidel Stainless tanks.
How to Use:
Mixing ports enter through full port 2" TC ball valves to allow for an easily installation and disassembly. Position and attach the mixer to your 2" TC ball valve. Open the valve and slide in the adjustable mixing shaft, lock the shaft in position, and turn on. Adjust the speed to accomodate your desired level of agitation. To remove unlock shaft, slide out, turn off TC ball valve, and then disconnect mixer from TC ball valve.
For Use in Beer:
Wine tank mixers are perfect for mixing hops during dry hopping operations. Their use decreases the time needed to extract hop oils and lowers the amount of hops needed to get the same dry hopping level. This requires a horizontal port with a full port ball vale on the tank.
Features:
All parts in contact with the liquid are made of stainless steel AISI 304.
0.75 kw power, speed 0-1400 RPM
Single phase power supply
Rod length 650 mm
Width 155 mm propeller
Stainless cart
Adapt your existing EnoItalia gravity fed wine bottle filler for use with larger bottle
Shorter filling heads can accomodate 3 and 5 liter bottles
Compatible with EnoItalia Benchtop, Deluxe Benchtop, and Trolley Style wine bottle fillers
The Large Format Filling Head can be swapped out for the standard filling head on EnoItalia gravity wine bottle fillers. It's compact design allows large format 3L & 5L bottles to be used with the gravity fillers.
Compatible With:
EnoItalia Benchtop Bottle Fillers
WE253, WE257
EnoItalia Deluxe Benchtop Bottle Fillers
WE254, WE258
EnoItalia Trolley Style Bottle Fillers
WE643, WE670
Adapt your existing EnoItalia gravity fed wine bottle filler for use with high viscosity liquids
Larger 17 mm diameter fill nozzles are designed for better flow with liquids like olive oil
Compatible with EnoItalia Benchtop, Deluxe Benchtop, and Trolley Style wine bottle fillers
The Olive Oil Filling Head can be swapped out for the standard filling head on EnoItalia gravity wine bottle fillers. It features a 17 mm Ø spout instead of the standard 15 mm Ø in order to handle more viscous liquids like olive oil.
Compatible With:
EnoItalia Benchtop Bottle Fillers
WE253, WE257
EnoItalia Deluxe Benchtop Bottle Fillers
WE254, WE258
EnoItalia Trolley Style Bottle Fillers
WE643, WE670
Filter wine and fill bottles in one pass by pairing the Tandem Filter Housing with the Enolmaster Bottle Filler
Installs in-line with the Enolmaster. The vacuum will draw wine from the storage tank, through the filters, and into the bottle
Includes tubing to connect to Enolmaster Filling Machine
Alcohol tolerance up to 18% ABV
Filter Cartridges sold separately and listed at the bottom of the page
The Enolmaster Tandem Professional Filter Housing is designed to operate in conjunction with the Enolmaster Bottle Filling Machine. Enolmaster Tandem helps you save time by filtering and bottling at the same time.
Place the filters in the housing and attach the hoses, then open the bypass valve on top of the filter housing. Place the Tandem Filter Housing inline between the product and the Enolmaster Filler. The Enolmaster Filling Machine draws the product from your tank and will pull the liquid through your filter housing, into the bottle.
Easy to Use
The Tandem professional filter housing in conjunction with the Enolmaster professional vacuum filler. The machine creates the vacuum inside the bottle by sucking the liquid from the main container. Then the liquid is easily filtered and bottled in a single operation.
Preserves the Product
The filtering system is designed to preserve the integrity of the product. The filtering cartridges retain only the unwanted particles without altering the organoleptic qualities of the product.
Easy to Clean
The Tandem professional filter housing is easily cleaned after each use. In this way you will always have maximum hygiene in the bottling process.
Please note: Recommended for use with wine and beer only. Use with spirits and liqueurs above 18% ABV may result in damage to the filter housing.
The ideal bottle filler for large-scale home winemakers or smaller commercial wineries Vacuum draws liquid from up to 12 feet below the filler with minimum oxygen exposure Fill up to 600 bottles per hour Adjustable max fill level Use with wine or uncarbonated cider and beer A commercial version of the Enolmatic filler that features four filling heads and allows you to fill up to 600 bottles per hour. This is the best bottle filler for the large-scale home winemaker or a small commercial operation. Through the use of a vacuum, the Enolmaster filler automatically starts a siphon, sucks the air out of your wine bottles to preserve freshness, and automatically shuts off when each bottle is filled to the perfect height every time. Not only does the entire process take place in a nearly oxygen-free environment, preserving the freshness of your wine, the rate of fill is extremely fast allowing you to bottle up to 600 bottles per hour. The Enolmaster creates a vacuum that sucks the wine directly from your fermenter, storage tank, or barrel, which can be located up to 12 feet below the Enolmaster. No need to start a siphon or to have to pump or move your wine above your filling machine. The vacuum simultaneously sucks the air out of your bottle allowing you to fill in a nearly oxygen-free bottle. This quality-first process helps to ensure that the delicate flavors of your wine, the flavors you worked so hard to get, are not lost in an open-air bottling process. Additionally, there are no moving parts in contact with the wine ensuring the gentlest handling possible. Fill speed can be adjusted allowing you to bottle at your preferred pace. While the filler is in operation, wine is not allowed back into the storage tank or barrel due to a one-way valve located in the supply line. The small amount of excess wine runs into a collection reservoir. The fill height can be adjusted and can be used with any size or type of bottle. The Enolmaster is a commercial product designed for a small winery. It has a continuous duty cycle, meaning it can run non-stop and is constructed entirely from food-grade materials. The frame is made of stainless steel as are the filling heads. Simply run water through the system to clean out the lines. The reservoir for excess overfill can be rinsed out or ran through the dishwasher. To filter your wine and bottle fill at the same time, add the optional in-line Tandem Professional Filter Housing and Filter Cartridges. Base and frame made from 304 stainless steel Fill nozzels made from 316 stainless steel Fill up to 600 x 750ml bottles per hour Made in Italy by Tenco Dimensions: 650m x 460mm x 450m Weight: 25 kg (55 lbs) Power: 110V / 60hz / 120W Fill bottles from 180 - 350 mm (7" - 13.75") in height Fits bottles with inner neck diameters of 16 - 28 mm (5/8"- 1.1")
Vacuum pump wine bottle filler with 180 bottle per hour filing capacity
Automatically starts siphon and shuts off when the bottle is filled
Oxygen is evacuated from each bottle before filling
Adjustable fill speed to match your preferred pace
Fill wine bottles directly from your fermenter, storage tank, or barrel
The Enolmatic filler with vacuum pump transfers the wine very gently, and fills your bottles to the perfect level every time. The vacuum pump depressurizes the reservoir, which then pulls your wine through the filler tube and into the bottles. The wine never touches the pump. It is very gentle, consistent, and easy to use.
110V 60 Hz 60 W
Vacuum pump wine bottle filler with 180 bottle per hour filing capacity
Automatically starts siphon and shuts off when the bottle is filled
Oxygen is evacuated from each bottle before filling
Adjustable fill speed to match your preferred pace
Fill wine bottles directly from your fermenter, storage tank, or barrel
The Enolmatic filler with vacuum pump transfers the wine very gently, and fills your bottles to the perfect level every time. The vacuum pump depressurizes the reservoir, which then pulls your wine through the filler tube and into the bottles. The wine never touches the pump. It is very gentle, consistent, and easy to use.
110V 60 Hz 60 W
Vacuum pump wine bottle filler with 180 bottle per hour filing capacity
Automatically starts siphon and shuts off when the bottle is filled
Oxygen is evacuated from each bottle before filling
Adjustable fill speed to match your preferred pace
Fill wine bottles directly from your fermenter, storage tank, or barrel
The Enolmatic filler with vacuum pump transfers the wine very gently, and fills your bottles to the perfect level every time. The vacuum pump depressurizes the reservoir, which then pulls your wine through the filler tube and into the bottles. The wine never touches the pump. It is very gentle, consistent, and easy to use.
110V 60 Hz 60 W
Vacuum pump wine bottle filler with 180 bottle per hour filing capacity
Automatically starts siphon and shuts off when the bottle is filled
Oxygen is evacuated from each bottle before filling
Adjustable fill speed to match your preferred pace
Fill wine bottles directly from your fermenter, storage tank, or barrel
The Enolmatic filler with vacuum pump transfers the wine very gently, and fills your bottles to the perfect level every time. The vacuum pump depressurizes the reservoir, which then pulls your wine through the filler tube and into the bottles. The wine never touches the pump. It is very gentle, consistent, and easy to use.
110V 60 Hz 60 W
Viking Malt - Viking Enzyme Malt is produced either from 2-row or 6-row spring barley. The steeping and germination conditions are chosen to promote enzyme release and synthesis. The kilning program is designed to preserve enzyme activity as possible.
Enzyme Malt is recommended to use when high portion of adjuncts is used in a brewing process. It is also suitable for production of quality grain whisky and pure alcohol. It can be also used for adjusting the Falling Number of baking flour. In order to optimize ethanol yield Enzyme Malt can be delivered as blends of varieties with different enzyme spectra.
In 2016 Viking Malt and Danish Malting Group joined forces to better serve their customers. Now the new Viking Malt is the leading malting company in Northern Europe and supply raw materials and services to the global brewing, distilling and food industries. Viking Malt has 6 malthouses in areas where our distinctive Nordic barley is sourced: in Halmstad, Sweden; Vordingborg, Denmark; Lahti, Finland; Panevezys, Lithuania and in Sierpc and Strzegom, Poland. The annual malting capacity is close to 600 kilotons.
Malt Specification:
Moisture % - max. 7.0
Extract fine % dm - min. 76.0
Diastatic power WK dm - min. 620
Alfa-amylase DU dm - min. 70
See the Documents tab below for Product Information and Typical Analysis.
This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Epidemic Ales
Crisp and refreshing traditional pale lager. A light-colored, low-alcohol refresher
Won the Gold Medal in the American Lager category at the 2020 Great American Beer Fest
Includes Northern Brewer and Saaz hops
Estimated ABV: 4.5%
Estimated IBUs: 9
Makes 5 gallons of finished beer
A traditional pale lager so crisp and refreshing that it deserves a moment to be enjoyed even if the world around you is ending. A perfect introduction to craft beer for the uninitiated, and a welcome change of pace for the craft beer guru that wants a break from hoppiness. Lager at World's End from Epidemic Ale uses a clean malt bill of Pilsner and Vienna malts and Flaked Corn for a light-colored, low-alcohol refresher.
Epidemic Ales opened in Concord, CA at the beginning of 2016 and have been brewing quality libations that leave a lasting impression ever since. In 2020, Lager at World's End earned them a Gold Medal in the American Lager category at the Great American Beer Fest (GABF) beer competition. That award-winning recipe featured our own Viking Pilsner Malt. We're stoked that we continue to receive excellent feedback from our Pro customers who are making incredible lagers *and* ales using Viking Pilsner as a base due to its exceptionally clean character.
Makes 5 gallons
Estimated Original Gravity: 1.042-47
SRM (Color Range): 3-4
IBUs: 9
Estimated Alcohol Percentage: 4.5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Epidemic Ales
Crisp and refreshing traditional pale lager. A light-colored, low-alcohol refresher
Won the Gold Medal in the American Lager category at the 2020 Great American Beer Fest
Includes Northern Brewer and Saaz hops
Estimated ABV: 4.5%
Estimated IBUs: 9
Makes 5 gallons of finished beer
A traditional pale lager so crisp and refreshing that it deserves a moment to be enjoyed even if the world around you is ending. A perfect introduction to craft beer for the uninitiated, and a welcome change of pace for the craft beer guru that wants a break from hoppiness. Lager at World's End from Epidemic Ale uses a clean malt bill of Pilsner and Vienna malts and Flaked Corn for a light-colored, low-alcohol refresher.
Epidemic Ales opened in Concord, CA at the beginning of 2016 and have been brewing quality libations that leave a lasting impression ever since. In 2020, Lager at World's End earned them a Gold Medal in the American Lager category at the Great American Beer Fest (GABF) beer competition. That award-winning recipe featured our own Viking Pilsner Malt. We're stoked that we continue to receive excellent feedback from our Pro customers who are making incredible lagers *and* ales using Viking Pilsner as a base due to its exceptionally clean character.
Makes 5 gallons
Estimated Original Gravity: 1.042-47
SRM (Color Range): 3-4
IBUs: 9
Estimated Alcohol Percentage: 4.5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Epsom is used to add sulfate and magnesium ions to brewing water. It is often used at half the levels of Gypsum. 1 gram in 1 gallon changes the salt levels by 103 ppm sulfate, 26 ppm Magnesium and adds 108 ppm to the hardness.
Promash is a useful utility to calculate water salts.
Epsom salt is also ideal as a nutrient source for growing hop plants.
Authentic Italian Terroir: Sourced from the Adriatic coast, making it the perfect base malt for Mediterranean lagers and trendy Italian Pilsners.
Signature Flavor Profile: Imparts a clean, malty-sweet foundation highlighted by delicate notes of fresh honey.
Usage: Up to 100% of your grain bill
Infuse your next batch with the distinct terroir of the Italian coastline! Weyermann® Eraclea Pilsner is a premium base malt crafted from top-tier barley grown in the lush, fertile plains of Northern Italy, just steps from the Adriatic Sea. If you are looking to brew bright, highly aromatic, and deeply refreshing Mediterranean-style beers, this is your ultimate foundation.
In the glass, Eraclea delivers a clean, malty-sweet profile laced with delicate notes of fresh honey. In the brewhouse, it performs exactly as you've come to expect from Weyermann's world-class standards. Brewers will appreciate its smooth processability, reliable extract yield, and the stellar foam stability it provides for a picture-perfect head of foam.
Whether you are chasing the trendy dry-hopped Italian Pilsner or just want a crisp, high-quality base for a classic lager, Eraclea brings a unique regional character to your fermenter.
Key Specifications:
Flavor Profile: Clean and malty-sweet with subtle, lingering honey undertones.
Brewing Performance: Excellent processability, high yield, and superior head retention.
Usage Rate: Up to 100% of your grain bill.
Recommended Beer Styles:
Pilsners: Italian Pilsner, German Pilsner, Pre-Prohibition Lager
Lagers: Mediterranean Lager, Italian Lager, Crisp American Lager
Specialty: Italian Grape Ale (IGA)
Malt Specification:
Color °L - 1.4 - 2.1
Moisture % - max. 5.0
Extract fine % dm - min. 80.5
Usage Rate - Up to 100%
The best brewers make large yeast starters to get their beer fermenting fast. Large populations of active yeast help ensure flavorful beer free of off flavors. Our 1000ml Erlenmyer Flask is the ideal vessel to make a large yeast starter for 5 gallon batches. Because it is made from borosilicate glass you can move it from a boil on your gas stove into a cold water bath for cooling, without the risk of cracking. (We do not recommend the use of an electric element. If this cannot be avoided, we recommend using a larger pot as a hot water bath on the stove.) This means you can do the whole process in one container, keeping it simple and helping to reduce the risk of contamination when transferring from one container to another. Recommended Process for Use of Flask: Double Boiler Method It is important for your safety to heat water in the flask with a heat source that distributes heat evenly. Our manufacturer has confirmed that direct heat to the glass can break down its integrity and break if the heat source doesn't distribute evenly. Morebeer! recommends using the "double boiler method." This process involves using a boiling water bath on the outside of the flask to heat up the water inside the flask. All you need is a kettle 3 gallons or larger. This process is much safer and efficient. If the flask should break or boil over, your kettle will be there to collect the contents, thus keeping your stove clean and keeping you away from potential harm. Features 1L (1000mL) Capacity Made from Borosilicate Glass Fantastic price for a flask of this size Produced for MoreBeer! Why make a yeast starter? (from our FAQ) We build starters for 3 main reasons. First, to ensure yeast health. By making a starter 1-3 days in advance, you ensure that your yeast is healthy and strong and ready to do its job. Second, to create more yeast. By making the starter you will increase the cell count of the yeast, giving you a better chance of keeping bacteria's and wild yeasts from fermenting your wort. Third, if you are making high gravity beers. If you are making a high gravity beer (1.060+) you will need more yeast to start the ferment faster. High gravity beers will also finish more completely when you pitch ample quantities of yeast. Fits our stopper 8 (FE45) In the lab world, these flasks are known as "Student Grade". A great flask for making yeast starters!(Student grade is not the highest grade flasks and will have minor defects) Kegland Part Number: KL03971
All of our flasks are made from borosilicate type glass which is nice because they can be transferred directly from heat to ice and not crack like normal glass.
Primarily used with our MT140 Economy Aeration-Oxidation System, this flask also makes a great addition to any home wine lab.
Uses a #5 stopper (see below)
In the lab world, these flasks are known as "Student Grade". A great flask for making yeast starters! (Student grade is not the highest grade flasks and will have minor defects)
These Erlenmeyer flasks help the best brewers to make large yeast starters to get their beer fermenting fast. Large populations of active yeast help ensure a healthy fermentation, free of off flavors. One of our favorite things about the Erlenmeyer flasks is that you can boil your starters directly in them! Our large 2000ml Erlenmyer Flask is the ideal vessel to make a large yeast starter for 5 gallon lagers and high gravity brews. Because it is made from borosilicate glass you can move it from a boil on your gas stove into a cold water bath for cooling, without the risk of cracking. (We do not recommend the use of an electric element. If this cannot be avoided, we recommend using a larger pot as a hot water bath on the stove.) This means you can do the whole process in one container, keeping it simple and helping to reduce the risk of contamination when transferring from one container to another. Recommended Process for Use of Flask: Double Boiler Method It is important for your safety to heat water in the flask with a heat source that distributes heat evenly. Our manufacturer has confirmed that direct heat to the glass can break down its integrity and break if the heat source doesn't distribute evenly. Morebeer! recommends using the "double boiler method." This process involves using a boiling water bath on the outside of the flask to heat up the water inside the flask. All you need is a kettle 3 gallons or larger. This process is much safer and efficient. If the flask should break or boil over, your kettle will be there to collect the contents, thus keeping your stove clean and keeping you away from potential harm. Features Massive 2L (2000mL) Capacity Made from Borosilicate Glass Fantastic price for a flask of this size Produced for MoreBeer! 6.5" base 2.5" top 10.75"H Why make a yeast starter? (from our FAQ) We build starters for 3 main reasons. First, to ensure yeast health. By making a starter 1-3 days in advance, you ensure that your yeast is healthy and strong and ready to do its job. Second, to create more yeast. By making the starter you will increase the cell count of the yeast, giving you a better chance of keeping bacteria's and wild yeasts from fermenting your wort. Third, if you are making high gravity beers. If you are making a high gravity beer (1.060+) you will need more yeast to start the ferment faster. High gravity beers will also finish more completely when you pitch ample quantities of yeast. In the lab world, these flasks are known as "Student Grade". A great flask for making yeast starters!(Student grade is not the highest grade flasks and will have minor defects) Kegland Part Number: KL0398
All of our flasks are made from borosilicate type glass which is nice because they can be transferred directly from heat to ice and not crack like normal glass.
Great Flask for yeast culturing.
Uses a #6.5 stopper (see below)
In the lab world, these flasks are known as "Student Grade". A great flask for making yeast starters! (Student grade is not the highest grade flasks and will have minor defects)
Kegland Part Number: KL03957
The best brewers make large yeast starters to get their beer fermenting fast. Large populations of active yeast help ensure flavorful beer free of off flavors. Our large 3000ml Erlenmyer Flask is a great vessel to make a large yeast starter for 5 gallon lagers and high gravity brews. Because it is made from borosilicate glass you can move it from a boil on your gas stove into a cold water bath for cooling, without the risk of cracking. (We do not recommend the use of an electric element. If this cannot be avoided, we recommend using a larger pot as a hot water bath on the stove.) This means you can do the whole process in one container, keeping it simple and helping to reduce the risk of contamination when transferring from one container to another. Recommended Process for Use of Flask: Double Boiler Method It is important for your safety to heat water in the flask with a heat source that distributes heat evenly. Our manufacturer has confirmed that direct heat to the glass can break down its integrity and break if the heat source doesn't distribute evenly. Morebeer! recommends using the "double boiler method." This process involves using a boiling water bath on the outside of the flask to heat up the water inside the flask. All you need is a kettle 3 gallons or larger. This process is much safer and efficient. If the flask should break or boil over, your kettle will be there to collect the contents, thus keeping your stove clean and keeping you away from potential harm. Features Massive 3L (3000mL) Capacity Made from Borosilicate Glass Fantastic price for a flask of this size Produced for MoreBeer! " base " top "H Why make a yeast starter? (from our FAQ) We build starters for 3 main reasons. First, to ensure yeast health. By making a starter 1-3 days in advance, you ensure that your yeast is healthy and strong and ready to do its job. Second, to create more yeast. By making the starter you will increase the cell count of the yeast, giving you a better chance of keeping bacteria's and wild yeasts from fermenting your wort. Third, if you are making high gravity beers. If you are making a high gravity beer (1.060+) you will need more yeast to start the ferment faster. High gravity beers will also finish more completely when you pitch ample quantities of yeast. In the lab world, these flasks are known as "Student Grade". A great flask for making yeast starters!(Student grade is not the highest grade flasks and will have minor defects) Kegland Part Number: KL03995
All of our flasks are made from borosilicate type glass which is nice because they can be transferred directly from heat to ice and not crack like normal glass. (We do not recommend the use of an electric element. If this cannot be avoided, we recommend using a larger pot as a hot water bath on the stove.) Great Flask for yeast culturing. Recommended Process for Use of Flask: Double Boiler Method It is important for your safety to heat water in the flask with a heat source that distributes heat evenly. Our manufacturer has confirmed that direct heat to the glass can break down its integrity and break if the heat source doesn't distribute evenly. Morebeer! recommends using the "double boiler method." This process involves using a boiling water bath on the outside of the flask to heat up the water inside the flask. All you need is a kettle 3 gallons or larger. This process is much safer and efficient. If the flask should break or boil over, your kettle will be there to collect the contents, thus keeping your stove clean and keeping you away from potential harm. In the lab world, these flasks are known as "Student Grade". A great flask for making yeast starters! (Student grade is not the highest grade flask and will have minor defects) Kegland Part Number: KL03964
This Erlenmyer flask is huge, coming in at 5000 ml (5L!), making it the ideal vessel to make a large yeast starter for a 10+ gallon batch. The best brewers make large yeast starters to get their beer fermenting fast, and most of them do so in an Erlenmeyer flask. Large populations of active yeast help ensure flavorful beer free of off flavors. Because this flask is made from borosilicate glass you can move it from a boil into a cold water bath for cooling. This means you can do the whole process in one container, keeping it simple and helping to reduce the risk of contamination when transferring from one container to another. Double Boiler Method It is important for your safety to heat water in the flask with a heat source that distributes heat evenly. Morebeer! recommends using the "double boiler method." This process involves using a boiling water bath on the outside of the flask to heat up the water inside the flask. All you need is a kettle 3 gallons or larger. This process is much safer and efficient. If the flask should break or boil over, your kettle will be there to collect the contents, thus keeping your stove clean and keeping you safe. Safety First: Please take us up on a great deal - save $14.95 when you purchase a 5000ml flask and our BE300 5 gallon stainless steel kettle at the same time. Use Promo code SAFETY1 at checkout. Features Massive 5L (5000ML) Capacity Made from Borosilicate Glass (also known as Pyrex) Fantastic price for a flask of this size Produced for MoreBeer! Why make a yeast starter? (from our FAQ) We build starters for 3 main reasons. First, to ensure yeast health. By making a starter 1-3 days in advance, you ensure that your yeast is healthy and strong and ready to do its job. Second, to create more yeast. By making the starter you will increase the cell count of the yeast, giving you a better chance of keeping bacteria's and wild yeasts from fermenting your wort. Third, if you are making high gravity beers. If you are making a high gravity beer (1.060+) you will need more yeast to start the ferment faster. High gravity beers will also finish more completely when you pitch ample quantities of yeast. In the lab world, these flasks are known as "Student Grade". Student grade flasks may have small scratches and air bubbles. A great flask for making yeast starters! For a stopper we recommend a size #8-9 (FE498 or FE49). Kegland Part Number: KL04008
Made with durable borosilicate 3.3 glass, these Erlenmeyer flasks are suitable for most applications. They feature a heavy-duty beaded rim to help prevent breakage and have easy-to-read graduations. Able to withstand temperatures of -50 to 550 °C (-58 to 1022 °F), they are autoclavable for sterilization.
In the lab world, these flasks are known as "Student Grade". Student grade is not the highest grade flasks and will have minor defects.
Please note this 125mL flask has a narrow neck compared to our Y402 unit and will not accept a #5 stopper. This unit will need a #3 stopper.
Specs:
Material: Borosilicate Glass
Capacity (mL): 125
Capacity (oz): 4
Min Graduation (mL): 50
Max Graduation (mL): 125
Graduation Interval (mL): 20
Overall Height (in): 4 59/64
Overall Height (cm): 12.5
Top Outside Diameter (mm): 22
Autoclavable: Yes
Base Diameter (cm): 7.2
Inside Rim Diameter (mm): 20
The Essential Kits are designed to get you up and brewing with one click. It's highly recommended you add this to your cart with the purchase of a Brew Bucket Series.
Hose Barb | ½” 90° for Blow-Off
Tubing | ½” ID Silicone (2ft)
Tubing | ⅜” ID Silicone (5ft)
Hose Clamps (2)
The Essential Kits are designed to get you up and brewing with one click. It's highly recommended you add this to your cart with the purchase of a Chronical 2.0.
Also works with legacy Chronical Brew Master Edition
Kit Includes:
Hose Barb | 1/2" to 1.5" TC
Hose Barb | 1" to 1.5" TC
Clamp | 1.5" TC clamp (2)
Gasket | 1.5" TC gasket (3)
Tubing | 1" ID Silicone (2ft)
Tubing | ½” ID Silicone (10ft)
Hose Clamps (2)
The Essential Kits are designed to get you up and brewing with one click. It's highly recommended you add this to your cart with your purchase of a CIP | Sprayball.
Compatible with:
CIP | 3" TC | Spray Ball Standard (under 30 gallons)
CIP | 3" TC | Spray Ball Pro (1BBL and Larger)
CIP | 1.5" TC | Spray Ball
