Starts siphon with a single stroke
Made from BPA-free acrylic plastic
Includes anti-sediment tip
Easy to dissasemble for cleaning and drying
7/8" outer diameter fits glass carboys, 1-gallon jugs or Growlers
The name says it all! No more struggling with all the different techniques to get a siphon started. The Easy-Siphon will get your transfer started quickly and with zero fuss. Simply submerge the the siphon, pull the inner tube up about halfway, then pump down to start the siphon. New design features 7/8" OD racking tube to better fit carboys, 1-gallon jugs, or growlers.
To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet.
Comes with 3/8" cane and 24" racking tube. 5/16" or 3/8" ID tubing must be purchased separately. Also available in 1/2" and 3/8" Mini models.
Maximum Temperature: 140°F (60°C)
Instructions:
Sanitize and rinse your Easy-Siphon.
Get the inner tube gasket and the outer tube wet.
Attach the curved siphon to a hose.
Submerge the end of Easy-Siphon into your container.
If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to.
Pull the inner tube up about 7" until the liquid fills the tube.
Pump the inner tube down and siphon will begin.
Pull out inner tube and sanitize Easy-Siphon for storage.
This product is not resistant to high levels of alcohol. Do not sanitize with alcohol.
Acrylic is safe for long exposure to ABV up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into liquid. If you need to exceed these limits, we recommend using a stainless racking cane.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Ekuanot® is a registered trademark owned by Yakima Chief Hops, LLC.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Ekuanot® is a registered trademark owned by Yakima Chief Hops, LLC.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid August.
Don't run away from this Evill Twin! Instead, run toward and embrace it like a long lost sibling. The Evill Twin Roller Mill is the perfect sidekick for any brewer needing to grind malted and non-malted barley, corn and other grains. Operation is smooth and easy thanks to the longer mill shaft. Unlike other manual mills, the crank on the Evill Twin connects to the shaft far enough away from the mill body that you won't scrape your knuckles on the grain bucket with every revolution. Better yet, the mill shaft comes ready to hook up to an electric power drill with no extra parts needed. Run your drill at 500 RPM and you'll be able to crush up to 6 pounds per minute! The adjustable gap setting allows you to customize your grind to the size of the grain, and thanks to the stainless steel construction, you can rest assured that this mill will last as long as its malevolent disposition.
Features:
Easily adjustable gap setting
Hopper holds 10 lbs
Mill shaft comes ready to connect to an electric power drill
With the drill running at 500 RPM, crush up to 6 lbs/minute
Rollers and hopper screws made from stainless steel
Frame, hand crank and hopper made from aluminum
Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Use the Fermonster Carboy Carrier to move your Fermonster, Plastic or Glass Carboy around with ease. The harness and strap handles are made from heavy-duty polypropylene, enabling you to haul up to 100 lbs of your wort or finished beer without the risk of losing your grip. Cradle your carboy with confidence and avoid spilling! The carrier comes with handles in two different positions for added convenience. Short handles for lifting and long handles for moving. The long handles are especially handy when lifting your carboy out of a top-loading fermentation locker.
Compatibility:
3, 5 and 6 gallon Plastic Carboys
3, 5 and 6 gallon Glass Carboys
3, 6 and 7 gallon Fermonsters
Take Care of the Carrier:
Avoid prolonged exposure to sunlight
Machine wash safe (low temperatures only)
Do not clean with bleach or products that contain bleach
Hang dry in the shade
Do not iron
Achieve consistent and optimal fermentation temperatures with the FermWrap Fermentation Heater. This flexible and easy-to-use unit wraps snugly around your fermenter, providing gentle and controlled heat. Use alone or simply plug into the 110V heatnig plug on most popular temp controllers
Provides gentle, even heating with 40 watts spread over almost two square feet
Keep your yeast happy and your ferment warm during those cold winter months with this flexible heater wrap! Don't be fooled by imitators and cheap knock-offs, this is the original FermWrap that has been produced by Fermentap for over a decade. Unlike those old heater belts, the FermWrap covers a wide area of your carboy or fermentation vessel, promoting an even heat distribution. Using tape to adhere, the FermWrap can be attached directly to your fermenter, or can be used to heat the space in a box (or refrigerator) that the fermenter is in. Depending on your configuration and insulation, you can increase the temperature of your ferment from 5-20°F. This differential can be increased by using the BrewBuilt™ Neoprene Carboy Sleeve. With 40 watts of heat spread over almost two square feet, it provides gentle, even heating. For more precise results, we recommend a temp controller and carboy thermowell. The controller will monitor the fermentation temp and only power on the FermWrap if the temperature drops below your set point. For the ultimate level of control, we recommend pairing it with the BrewBuilt CoolStix™ to provide cooling. With both accessories plugged into the temp controller, you'll get cooling or heating whenever you need it. Specs:
40 watts 115V 11" H x 25" W Item does not include carboy as pictured.
Kegland Part number: KL0625
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Godiva® is a registered trade mark of Charles Faram & Co Limited and is from the Charles Faram Hop Development Programme.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Godiva® is a registered trade mark of Charles Faram & Co Limited and is from the Charles Faram Hop Development Programme.
PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.
This heat insulation jacket is designed to be used with the Grainfather to keep heat contained in the boiler and maintain a constant temperature during your brew during cooler times of the year.
Features:
Material - SBR Foam (0.27" thickness)
Designed for the Grainfather for heat insulation, especially in colder temperature areas.
Easy to wipe clean, polyurethane outer layer, and machine washable.
PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.
Make the yeast dumping, transferring and sampling process more professional with this innovative all in one valve. Sampling and transferring is done through a valve above the sediment line, allowing for clear, sediment free beer. Collect your yeast from below the sediment line for recultivating and pitching.
Dual Valve Tap with 110 mm (4.3”) liquid inlet
304 Stainless Steel
Can be completely disassembled for thorough cleaning
PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.
Many factors can be the difference between good and great beer, and temperature control slots in near the top of the list. A stable temperature throughout fermentation keeps the yeast happy, and helps prevent the off flavors produced when they become stressed.
In order to cool with the Grainfather Conical Fermenter, you'll also need the Conical Fermenter Temperature Controller (FE233). If your target temperature is below the temperature of the wort in your fermenter, the Cooling Pump Kit will pump ice cold water through the double walled insulated interior, cooling your wort in the process.
Connect the included couplers and insulated hoses to the Conical Fermenter, lower the submersible pump into a cooler with cold water (add ice as needed) and pump it through the insulated cooling sleeve of the Conical Fermenter body.
Conical Fermenter Cooling Pump (submersible)
T-section power connector
2 x brass couplers (with self-sealing hose connections)
Rated 12 VDC – 4.8 Watts
PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.
The Grainfather Sparge Water Heater is a temperature-controlled unit that allows you to heat up to 6.6 gallons (25 L) of water making the brewing process even easier by having the right amount of sparge water heated to the right temperature ready at the time of sparge.
Start heating your sparge water when you begin the mash to ensure it is ready for when you need to sparge. Once water is at required temperature, it will hold that temperature until changed or turned off. Also comes with a sight glass, tap and heating lights.
Actual capacity from bottom to MAX level is 6.6 gal 25 liters (+/-0.5L).
110-120V~, 60Hz, 1500W (USA)
Single wall 304 ss material, brushed finish
One piece structure for easy cleaning
304 stainless steel lid with twisted lock for safety
Cool touch and robust lid handle and urn handles
Water gauge indication and stainless steel ball valve water tap
Two overheat protection
Concealed heating element
Control lights: heating and keep warm
ON/OFF switch
Maintenance base
With 45-110°C variable thermostat
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Introducing the Second Edition of world’s most comprehensive beer hop dictionary. The Hops List – The perfect tool for passionate brewers and craft beer drinkers.
Discover new hop flavors and aromas from around the world. The Hops List is the largest collection of hops information ever compiled. With it you’ll have access to variety descriptions, analytical data, tasting notes, substitutes, style suggestions and lots more on a staggering 339 unique varieties.
Inside you’ll also discover insights from brewmasters who have worked at some of the world’s most prestigious breweries like Dogfish Head, Founders Brewing Co. and Brooklyn Brewery among many others. Inside they reveal some of their favorite hop varieties as well as tips on how to use them best.
The Hops List is a fantastic resource for professional brewers, amateur brewers and craft beer drinkers who are looking for an exhaustive resource on just about every beer hop on the planet.
Features:
339 Hop Varietals
Tasting notes, origins, acid and oil data, and more
Tips from professional brewers
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Make your brew day easier and your additions more efficient with a Kettle Spider. Attach one of our reusable nylon bags with drawstring and use the Kettle Spider to steep grains in an extract batch or use for multiple hop additions in a boil.
Often when you use a bag for hops or grain you are not getting the full extraction of flavor or alpha acids. With an ideal placement in the middle of your kettle, the Kettle Spider aids in extraction of flavor, oils and alpha acids.
The Kettle Spider makes bags easier to use with hops because it is open throughout the boil. Just keep adding the hops your recipe calls for. Also keeps bags off the bottom of the kettle, preventing a hole from developing in your bag.
Tip: To secure your bag, try attaching a Keg Lid O-ring around the ring to hold your bag in place.
Adjustable arms w/ anti-slip silicone sleeves
Hole Diameter: 3.79"
Arm Length: 9.15"
Max Kettle Diameter: 20.5"
Please note that this item does not include a mesh bag.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Starts siphon with a single stroke
Made from BPA-free acrylic plastic
Includes anti-sediment tip
Easy to dissasemble for cleaning and drying
7/8" outer diameter fits glass carboys, 1-gallon jugs or Growlers
Mini Easy Siphon will reduce loss when racking from small vessels
The name says it all! No more struggling with all the different techniques to get a siphon started. The Easy-Siphon will get your transfer started quickly and with zero fuss. Simply submerge the the siphon, pull the inner tube up about halfway, then pump down to start the siphon. New design features 7/8" OD racking tube to better fit carboys, 1-gallon jugs, or growlers.
To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet.
Comes with 3/8" cane and 15" racking tube. 5/16" or 3/8" ID tubing must be purchased separately.
Maximum Temperature: 140°F (60°C)
Instructions:
Sanitize and rinse your Easy-Siphon.
Get the inner tube gasket and the outer tube wet.
Attach the curved siphon to a hose.
Submerge the end of Easy-Siphon into your container.
If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to.
Pull the inner tube up about 7" until the liquid fills the tube.
Pump the inner tube down and siphon will begin.
Pull out inner tube and sanitize Easy-Siphon for storage.
This product is not resistant to high levels of alcohol. Do not sanitize with alcohol.
Acrylic is safe for long exposure to ABV up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into liquid. If you need to exceed these limits, we recommend using a stainless racking cane.
This 64 oz growler is the perfect way to transport beer in style! These are half gallon glass growlers with the MoreBeer! logo screened onto the front and cursive text reading "Life is too short to drink cheap beer" on the back.
*NOTE* Does not come with a cap - must be purchased separately. See our GL510B.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Mosaic® is a registered trademark owned by Yakima Chief Hops, LLC.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Mosaic® is a registered trademark owned by Yakima Chief Hops, LLC.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Mosaic® is a registered trademark owned by Hop Breeding Company.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
