An optional vacuum device for the Zeus Large Format Bottle Corker. This model has an adpater designed to work with Farro brand 5L Glass Wine Bottles. The bottle interface was specifically machined for the Farro 3L bottle so that the o-ring makes an airtight seal during the corking process. Creating a vacuum in the bottle prior to corking removes oxygen but also reduces pressure in the headspace which can potentially cause corking issues. This vacuum adapter requires the connection of an air compressor to create the vacuum. See here for the vacuum device with adapter for 3L still wine bottles and Champagne bottles.
Mignon filling nozzle for the Ultrafiller 1. With a diameter of only 0.31" (8mm), this nozzle preferred for filling the smallest bottles and well suited for use with oil or spirits.
Mignon filling nozzle for the Ultrafiller 2 & 4. With a diameter of only 0.31" (8mm), this nozzle preferred for filling the smallest bottles and well suited for use with oil or spirits.
Prevents vacuum pump failure when bottling sugary or hot products by effectively filtering impurities.
Comes with pre-assembled tubes and adapters for quick and hassle-free setup; designed for vertical mounting.
Built to withstand prolonged use in dusty environments, with a metal mesh filter element and easy-to-clean components.
When using the Ultrafiller to fill liqueurs, spirits, syrups, or other sugary products—as well as hot products such as juices—it is essential to equip the machine with the oil bath filter. This filter protects the vacuum pump, which could fail over time without proper filtration. Please note that the oil bath filter is not included with the Ultrafiller and must be purchased separately.
Important: Failure to use this filter when bottling the above-mentioned products will void the warranty for the bottling machine.
Mounting Instructions
Before using the filter, fill the cup with food-grade mineral oil up to the indicated level. Medium-density oils are recommended for optimal performance.
Install the filter between the vacuum pump and the recovery tank. The kit includes pre-assembled tubes and hose adapters for your convenience. Always mount the filter vertically:
Connect the OUT port to the pipe leading from the motor.
Connect the IN port to the pipe and quick-release fitting supplied with the tank. (Refer to the detailed instructions for further guidance.)
Maintenance
These filters are designed for prolonged use, even in dusty environments, offering excellent filtration and durability. To maintain optimal performance:
Regularly change the oil, ensuring the level remains at the indicated mark.
Remove impurities that accumulate during operation.
For particularly dusty conditions, disassemble and wash the lower parts of the filter daily.
Materials
Painted sheet metal container
Metal mesh filter element
Operating temperature range: 32°F to 197°F
The 200L Atmospheric Tank is intended to be sold as an accessry to the BB50 Bag In Box filler. If you will install a filter station before the filler, it is recommended to install a buffer tank in between the filter and the filler. Two options are available: the Atmospheric Tank and the Isobaric Tank. The Isobaric Tank is a more professional 100L automatic buffer tank that uses nitrogen to push liquid into the filler. With this configuration, the BB50 will not include the pump, and the control panel will have an automatic program to set the pressure used during filling or washing.
The 200L Atmospheric Tank is intended to be sold as an accessry to the BB50 Bag In Box filler. If you will install a filter station before the filler, it is recommended to install a buffer tank in between the filter and the filler. Two options are available: the Atmospheric Tank and the Isobaric Tank. The Atmospheric Tank is a simple solution, 200L in size with internal level sensor and external control for a pump.
Replacement roller mount for the Semi-Automatic Label Applicator Machine. This roller mount attaches on the interior of the labeling machine. For the exterior roller mount, see here. KegLand Part Number: KL88925
Replacement roller mount for the Semi-Automatic Label Applicator Machine. This roller mount attaches on the exterior of the labeling machine. For the interior roller mount, see here. KegLand Part Number: KL88925
Installation of Levelling Feet on a Speidel Tank. Levelling Feet can be used to orient a tank into a perfectly vertical position even though it is in place on sloped floors. This option is for round tanks 140cm - 160cm in diameter. Installs two feet per leg of the tank. Feet are adjustable by hand and then set in position with a locking nut and crescent wrench - easy and fast to set up.
Please Note: Purchasing this item installs an optional feature on a Speidel Tank. This item cannot be purchased independently, and must be purchased on the same invoice as the tank it is to be installed on to ensure accurate manufacturing.
Installation of Levelling Feet on a Speidel Tank. Levelling Feet can be used to orient a tank into a perfectly vertical position even though it is in place on sloped floors. This option is for round tanks 100cm - 120cm in diameter. Installs one foot per leg of the tank. Feet are adjustable by hand and then set in position with a locking nut and crescent wrench - easy and fast to set up.
Please Note: Purchasing this item installs an optional feature on a Speidel Tank. This item cannot be purchased independently, and must be purchased on the same invoice as the tank it is to be installed on to ensure accurate manufacturing.
