You love your Carboy Cleaner so much that you’ve worn out the cleaning pads!
A set of replacement pads and washers for The Carboy Cleaner™. The ease and convenience of the Carboy Cleaner can’t be overstated. After you’ve used it to clean enough carboys and kegs, you will need to replace the cleaning pads.
Set of 2 replacement pads and 4 washers for The Carboy Cleaner™.
This attachement can be used to replace the spigot or the airlock on your Speidel plastic fermenter and give you a 1/2 in. MPT to the outside and a 1/2 in. FPT on the inside. This allows you to attach a variety of components on the inside and outside of your fermenter. This coupling uses the standard speidel lock ring and gasket.
Your days of lugging heavy glass carboys around are over thanks to these plastic carboys! Our Plastic Carboys are made from 100% Virgin PET plastic, which is far more resistant to oxygen than regular plastic. They’re much lighter and safer than glass, which is good if you need to move your fermenter around the house to find the right temperature. Full carboys can be heavy and hard to maneuver and glass can break resulting in possible injury. In addition to being safer to handle, they’re more economical than glass as well. With no ribs on the sides, there’s no place for yeast and sediment to collect, making cleaning a breeze. We suggest cleaning them with an overnight PBW soak, shake, rinse, and sanitize. You’ll want to avoid vigorous scrubbing during cleaning to avoid scratches.
Two special features we love about our PET Carboys are the punted base and extra head space. The punted base makes the carboy easier to hold while carrying or pouring, and prevents sediment disturbance during transfers. The extra head space is a huge plus to make sure you have enough room for when your fermentation gets going.
Specifications:
Uses a #10 stopper or a 5 Gallon Carboy Hood.
Weighs 1.0 lbs
Rated to 140 degrees F
Height: 16 inches
Diameter: 9 inches
Completely taste and odor free
Carboys can withstand up to 15 psi of pressure with no deformation
Punted base to prevent sediment disturbances during transfer
Made of food grade plastic, this 12 gallon wine fermenter is great for grapes and will hold around 75 lbs of must.
Dimensions: 21” tall x 15” wide at top tapering to 12.5 at bottom.
Stainless dip tube and thermowell for Speidel plastic fermenters. Replace your spigot with this dip tube along with a ball valve for a nice spigot upgrade. The 1/2 in. NPT connection can also be used for other attachments such as, quick disconnects, camlock components, or tri clamp. The dip tube uses the stock speidel spigot lock ring and gasket.
This is the replacement lid for the 20/30 L Speidel Round Plastic Fermenters. While this is not a piece which should wear out, we've seen these take damage, and eventually need to be replaced.
This lid fits our 20 l (5.3 gal) & 30 l (7.9 gal) Speidel Round Plastic Fermenters.
Please note: This product consists of 3 pieces. One outer threaded ring, one top cover and one gasket
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 14.6 inches Diameter: 9 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.
Stainless dip tube for Speidel plastic fermenters. Replace your spigot with this dip tube along with a ball valve for a nice spigot upgrade. The 1/2 in. NPT connection can also be used for other attachments such as, quick disconnects, camlock components, or tri clamp. The dip tube uses the stock speidel spigot lock ring and gasket, but can be upgraded with our custom gasket for a more secure connection. This attachment system is a great way to increase pickup depth of your fermenter.
Made in Italy, these are premium glass carboys are set apart from others because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This 6 gallon size works great as a primary fermenter for beer, wine and mead.
Our line of Itailan carboy is our top recommendation for glass carboys.
Specifications:
Weight: 14.0 pounds each
Dimensions 21" x 11"
Country of origin: Italy
Replacement lid gasket for 60L - 500L Speidel Rectangular Plastic Storage tank lids. Please note these replacement gaskets are for the newer generation tanks introduced in 2017. A redesign of the lid called for a different sized gasket. The new generation gaskets are 7-3/4" in diameter and 3/8" thick. The older generation gaskets are 7" in diameter, and 1/4" thick. For the Pre 2017 lid gasket please see FE736.
Premium Italian glass carboy fermenter made from thick, high-quality, lead-free glass
Uniform thickness with less internal defects than standard glass carboys
Perfect for fermenting beer, wine, cider, mead, and more!
Clear glass allows you to monitor fermentation activity as it happens
Threaded neck finish compatible with carboy hoods
6.5-gallon size offers plenty of headspace for vigorous fermentations
Made in Italy, these are premium glass carboys are set apart from others because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This large 6.5 gallon size carboy fermenter is perfect for 5 gallon batches as there is plenty of head space to avoid blow-off during fermentation.
This carboy has a smaller threaded neck than standard carboys, and requires a specific hood for use with racking, and fermenting.
Our line of Itailan carboy is our top recommendation for glass carboys.
Specifications:
Weight: 20.0 pounds each
Dimensions: 21.0"h x 12.5"w x 12.5"d"
Country of origin: Italy
The Brew Bucket was the first product and the origin of Ss Brewtech, and for many brewers, the Brew Bucket was their first chance to ferment in stainless steel. Nearly a decade later, Ss challenged their engineering team to pair some of the newest technologies with the original design.
Brew Bucket Pure Flow Valve
The star of the Brew Bucket 2.0 is the new Brew Bucket Pure Flow Valve. This valve uses Pure Flow technology, originally developed for the Ss line of professional brewhouses. The removable silicone membrane of the valve provides a sanitary environment where beer makes contact with nothing except silicone. Additionally, they have molded the racking arm geometry into the valve’s silicone diaphragm to provide a seamless flow path for beer when transferring from the Brew Bucket 2.0.
Sanitary Connection
The valve attaches to the Brew Bucket using a welded external garden hose thread fitting that allows for a compact, easy-to-use connection without the need to fumble with additional clamps and gaskets. The threads are located externally and sealed by the gaskets built into the Pure Flow silicone, keeping them clean and sanitary. With the new valve design, the brewer can fully rotate the racking arm 360 degrees for maximum control while racking a finished beer.
Conical Base
The Brew Bucket 2.0 continues what made the original a great solution for home brewers. The pro-inspired conical base helps minimize trub interaction with fermented beer, thus limiting any concerns of off flavors produced during maturation. Combined with the rotatable racking arm, brewers can effortlessly rack off clean beer like the pros do in craft breweries.
Full Width Lid
The Brew Bucket 2.0 features the same full-width removable lid as the original, with a wide access opening that makes cleaning and sanitizing a breeze. Finally, the included thermowell has been repositioned to the lid, and the increased length allows for accurate readings, even when brewing partial batches.
Features
Pro-Inspired Conical base
Blow off port in lid for airlocks or blow off tubing
Rotatable Silicone Racking Arm
Pure Flow Valve for transfers and gravity samples
304 Stainless Steel
7 gallon capacity
300m Thermowell
Thermometer | LCD Temp Display Module Dual Temp
Wide lid with secure spring clamps
Etched volume markings gals/liters
Welded carry handles
Surface safe Silicone Feet
Specs:
Tank Size: 7 gal
Batch Size: 5 gal
Dimensions: 24" H x 13" W x 13" D
Weight: 11 lbs
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Ported Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The large 7 gallon size was designed to provide ample space for fermentation and you'll find the molded in volume markers super handy for accurate filling. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These Fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. The 7 gallon volume is a monster of a fermenter, reducing blowoff issues seen with standard 5 and 6 gallon carboys. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5, 6, and 7 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
Dry airlock with marble for variable capacity tanks. Features a threaded shaft, and a plastic backnut with gasket that screws onto the underside. The outside dimension of the threads is 1-13/16 inch, it will fit a hole from 1-13/16 in to 2-1/4 in wide. The inside measurement of the airlock is 1-1/2 inch.Includes a marble with allows the release of gasses, but will not allow air into the tank. The marble is the sealing device, no water or other valves are used. Features a tab with hole on the top so you can attach a rope for raising or lowering the VC lid.
Stainless steel spigot for wide mouth glass carboys, jugs, and beverage dispensers. Standard left to right turn.
Compatible with Farro Glass ported wide mouth glass carboys.
Threading: M16 x 1.25
The FastFerment Collection Ball lets you harvest and store your yeast for future batches. Having an extra ball means you can store yeast from your previous brew, while collecting yeast from your current! Grab a few of these to keep your favorite strains on hand for fast fermenting anytime! You will need a FastFerment base unit in order to use this product.
Comes with Ball, Union Connection, and stopper.
The ported version of our popular PET Plastic carboy. No more siphoning thanks the hole located 2 inches from the base of the unit. This version comes with our trusty plastic bucket spigot (FE347). To install the spigot you will need the installation tool (FE311A) to hold the nut in place as you thread in the spigot. Your days of lugging heavy glass carboys around are over thanks to these plastic carboys! Our Plastic Carboys are made from 100% Virgin PET plastic, which is far more resistant to oxygen than regular plastic. They’re much lighter and safer than glass, which is good if you need to move your fermenter around the house to find the right temperature. Full carboys can be heavy and hard to maneuver and glass can break resulting in possible injury. In addition to being safer to handle, they’re more economical than glass as well. With no ribs on the sides, there’s no place for yeast and sediment to collect, making cleaning a breeze. We suggest cleaning them with an overnight PBW soak, shake, rinse, and sanitize. You’ll want to avoid vigorous scrubbing during cleaning to avoid scratches. Two special features we love about our PET Carboys are the punted base and extra head space. The punted base makes the carboy easier to hold while carrying or pouring, and prevents sediment disturbance during transfers. The extra head space is a huge plus to make sure you have enough room for when your fermentation gets going. Specifications:
Uses a #10 stopper or a 5 Gallon Carboy Hood. Weighs 1.0 lbs Rated to 140 degrees F Height: 16 inches Diameter: 9 inches Completely taste and odor free Punted base to prevent sediment disturbances during transfer Spigot included
Made from FDA-approved, food-grade plastic, these fermenters are ideal for the initial ferment of wine, especially red wines. 22.5" Tall by 20" diameter (25" in diameter including handles)
Photographed in picture with optional lid.
This optional lid is a great accessory if you want a more convenient way to move your Flat Bottom FermZilla around. Includes a silicone grommet for your airlock pre-installed.
This unique FermZilla lid piece does not require thread tape, o-rings or washers to form an airtight seal.
Please Note: This lid is not pressure rated.
KegLand Part Number: KL20848
Heavy-duty HDPE plastic fermentation and stoarge tank
Made from food-safe materials with extra thick walls to preserve the aroma of your beverage
Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid
Wide top port opening for easy cleaning
Airlock & stopper included
Made in Germany by Speidel
The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable.
Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you!
These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price.
Key Features:
Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass.
Small footprint makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making.
Built-in handles make these tanks easy to move, even when full.
Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush!
All ports seal with gaskets and the vessel can be fully sealed for long-term storage.
Includes a spigot, airlock and stopper.
Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks
Suggested Applications:
12L: Perfect for storing small lots and experimental batches or taking some of your beer or wine along with you to your next party.
20L: Ideal for secondary fermentation and storage of 5 gallon batches.
30L: The vessel for fermenting wine kits and 5 gallon batches of beer with plenty of headspace and no need for a blowoff tube.
60L: Perfect for fermenting larger batches of wine or 10 gallon batches of beer in a single container! Only 4" larger in diameter than a 6.5 gallon carboy!
120L: Ferment & Store large batches of anything - your creativity is the only limit!
Approximate Dimensions: 10in Diameter x 14in Height (w/out airlock in place). Note - The maximum temperature that these plastic fermenters can handle is 140F.
FAQ:
Can filled containers be carried by the handles?
Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs).
Is there an upper limit on the alcohol content of the stored liquid?
In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out.
Up to what temperature can the containers be used?
For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).
Crystal Clear super smooth PET makes fermenting and cleaning super easy
Pressurizable for fermentation and closed transfer to your keg
Includes BlowTie spunding valve kit, red & yellow carbonation caps, and floating dip tube as standard
The FermZilla 60L All Rounder is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating, and dispensing. It's far more capable than the FermZilla Flat Bottom but less complicated and less expensive than the FermZilla Tri-Conical fermenter. The key differences are that the All Rounder can be pressurized, unlike the Flat Bottom, but it does not have a dump valve like the FermZilla Tri-Conical.
The FermZilla All Rounder Easy-Grip model comes packed with accessories so you can take full advantage of this pressurizable fermenter on day one. The new stock standard includes Easy-Grip threaded lid ring, BlowTie spunding valve with integrated pressure gauge, ball lock carbonation caps for the lid, and floating dip tube kit with weighted filter.
What's Included:
FermZilla 60L All Rounder Fermenter
Hex Base with 24 x Sticky Dots (pre-attached)
Easy-Grip Threaded Lid Ring
Integrated Gauge BlowTie Kit Spunding Valve (0-15 psi)
Silicone Dip Tube Kit with Yellow Weighted Filter and SS Float
Red & Yellow Carbonation Caps
Adhesive Thermometer
Graduation Sticker
Specs:
60 L (15.9 gal) Total Volume
Pressure Rated to 2.5 Bar (36.2 psi)
Height in Stand - 35"
Tank Diameter - 14"
Lid Ports - 28 mm PCO 1881 threads
Temperature Rating:
When not under pressure, do not expose to liquids above 131°F
When under pressure, do not expose to any temperatures above 95°F*
*Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years.
Kegland Part number: KL47289
NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available below. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.
FermZilla All Rounder 30L & 60L | User Guide
Heavy-duty HDPE plastic fermentation and stoarge tank
Made from food-safe materials with extra thick walls to preserve the aroma of your beverage
Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid
Wide top port opening for easy cleaning
Airlock & stopper included
Made in Germany by Speidel
The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable.
Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you!
These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price.
Key Features:
Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass.
Small footprint makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making.
Built-in handles make these tanks easy to move, even when full.
Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush!
All ports seal with gaskets and the vessel can be fully sealed for long-term storage.
Includes a spigot and oversized 2-piece Speidel airlock.
Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks
Suggested Applications:
12L: Perfect for storing small lots, making experimental batches and taking some of your beer or wine along with you to your next party.
20L: Ideal for secondary fermentation and storage of 5 gallon batches.
30L: The vessel for fermenting wine kits and 5 gallon batches of beer with plenty of headspace and no need for a blowoff tube.
60L: Perfect for fermenting larger batches of wine or 10 gallon batches of beer in a single container! Only 4" larger in diameter than a 6.5 gallon carboy!
120L: Ferment & Store large batches of anything - your creativity is the only limit!
Approximate Dimensions: 13.5in Diameter x 18.5in Height (w/out airlock in place). Note - The maximum temperature that these plastic fermenters can handle is 140F.
FAQ:
Can filled containers be carried by the handles?
Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs).
Is there an upper limit on the alcohol content of the stored liquid?
In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out.
Up to what temperature can the containers be used?
For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).
Specially designed for long-lasting use in demanding environments, each round Lavex bin is made of heavy-duty plastic resin. The resin is engineered to take a beating, making it strong and sturdy enough to withstand impact, while resisting cracking. NSF-listed and FDA-approved, the resin also makes each bin food-safe and ideal for bulk food storage.
32 gallon round food grade plastic container. Ideal for primary fermentation of grapes, and general storage.
A 32 gallon bucket will hold around 300 pounds of grapes, enough for about 18 gallons of finished wine.
NSF-listed and FDA-approved, the resin also makes each trash can food-safe and ideal for bulk food storage.
Made in America
White FDA approved food grade fermenters for the intitial ferment of wine, especially red wines. 24.25" round by 27.5" tall. (Handles stick out 2.5" on two sides)
Plastic spigot with 0.39" barb for wide mouth glass carboys, jugs, and beverage dispensers. Barbed end with twist handle.
Direct replacement spigot for ported Farro Glass Wide Mouth Carboys.
5 Liter dark green jug. Includes a finger grip molded into the bottle. Sold individually.
This jug is an ideal option for small batch fermentations. Pair with 19.5mm x 28.5mm silicone stopper (FE523) to install an airlock.
Please Note: The thread style is A3380, 31.5mm ROPP finish. This is a specialty screwcap that we do not stock, as it is intended for use as a fermenter.
There are some tools you simply can't do without. Once you have discovered the “flexibility” of this funnel and all of the places it can be used, you will never go without one again!
This 9 inch Funnel with a flexible output hose can be used when transferring liquid into a carboy, adjusting to where you need it to fit into the carboy neck. The flexible tubing also means you can use it anywhere you need to maneuver tight quarters or strange configurations.
Heavy-duty HDPE plastic fermentation and stoarge tank
Made from food-safe materials with extra thick walls to preserve the aroma of your beverage
Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid
Wide top port opening for easy cleaning
Airlock & stopper included
Made in Germany by Speidel
The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable.
Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you!
These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price.
Key Features:
Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass.
Small footprint makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making.
Built-in handles make these tanks easy to move, even when full.
Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush!
All ports seal with gaskets and the vessel can be fully sealed for long-term storage.
Includes a spigot and oversized 2-piece Speidel airlock.
Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks
Suggested Applications:
12L: Perfect for storing small lots, making experimental batches and taking some of your beer or wine along with you to your next party.
20L: Ideal for secondary fermentation and storage of 5 gallon batches.
30L: The vessel for fermenting wine kits and 5 gallon batches of beer with plenty of headspace and no need for a blowoff tube.
60L: Perfect for fermenting larger batches of wine or 10 gallon batches of beer in a single container! Only 4" larger in diameter than a 6.5 gallon carboy!
120L: Ferment & Store large batches of anything - your creativity is the only limit!
Approximate Dimensions: 12 in. Diameter x 16.5 in. Height (w/out airlock in place). Mouth is 4.75 in. wide. Note - The maximum temperature that these plastic fermenters can handle is 140F.
FAQ:
Can filled containers be carried by the handles?
Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs).
Is there an upper limit on the alcohol content of the stored liquid?
In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out.
Up to what temperature can the containers be used?
For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).
Monitor and track your fermentation from your computer or phone with Speidel's new Garspundmobil. The monitor sits on your Speidel airlock and measures temperature and counts the number of bubbles coming from your fermentation. It uses this information to show you how active your fermentation is and estimate the gravity.
Features:
Measures fermentation activity by counting the number of bubbles passing through your airlock
Measures temperature of your fermentation
Sends this information to MySpeidel wirelessly
Uses network standard: IEEE 802.11 b/g/n
Device's status is shown through a light inside the unit
USB cable included
Replace a lost or broken collection ball for your 14 gallon FastFerment or just get an extra one to store more yeast! The collection ball is 40.6 oz (1200 ml) and made from food grade HDPE.
The ported version of our popular PET Plastic carboy. No more siphoning thanks the hole located 2 inches from the base of the unit. We recommend using our plastic bucket spigot (FE347). To install the spigot you will need the installation tool (FE311A) to hold the nut in place as you thread in the spigot. Your days of lugging heavy glass carboys around are over thanks to these plastic carboys! Our Plastic Carboys are made from 100% Virgin PET plastic, which is far more resistant to oxygen than regular plastic. They’re much lighter and safer than glass, which is good if you need to move your fermenter around the house to find the right temperature. Full carboys can be heavy and hard to maneuver and glass can break resulting in possible injury. In addition to being safer to handle, they’re more economical than glass as well. With no ribs on the sides, there’s no place for yeast and sediment to collect, making cleaning a breeze. We suggest cleaning them with an overnight PBW soak, shake, rinse, and sanitize. You’ll want to avoid vigorous scrubbing during cleaning to avoid scratches. Two special features we love about our PET Carboys are the punted base and extra head space. The punted base makes the carboy easier to hold while carrying or pouring, and prevents sediment disturbance during transfers. The extra head space is a huge plus to make sure you have enough room for when your fermentation gets going. Specifications:
Uses a #10 stopper or a 5 Gallon Carboy Hood. Weighs 1.0 lbs Rated to 140 degrees F Height: 16 inches Diameter: 9 inches Completely taste and odor free Punted base to prevent sediment disturbances during transfer Does not come with spigot.
Heavy-duty HDPE plastic fermentation and stoarge tank
Made from food-safe materials with extra thick walls to preserve the aroma of your beverage
Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid
Wide top port opening for easy cleaning
Airlock & stopper included
Made in Germany by Speidel
The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable.
Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you!
These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price.
Key Features:
Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass.
Small footprint and rectangular shape makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making.
Built-in handles make these tanks easy to move, even when full.
Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush!
All ports seal with gaskets and the vessel can be fully sealed for long-term storage.
Includes a spigot and oversized 2-piece Speidel airlock.
Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks.
22"L x 16"W x 22" H, 8.82 lbs
FAQ:
Can filled containers be carried by the handles?
Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs).
Is there an upper limit on the alcohol content of the stored liquid?
In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out.
Up to what temperature can the containers be used?
For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).
Heavy-duty HDPE plastic fermentation and stoarge tank
Made from food-safe materials with extra thick walls to preserve the aroma of your beverage
Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid
Wide top port opening for easy cleaning
Airlock & stopper included
Made in Germany by Speidel
The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable.
Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you!
These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price.
Key Features:
Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass.
Small footprint makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making.
Built-in handles make these tanks easy to move, even when full.
Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush!
All ports seal with gaskets and the vessel can be fully sealed for long-term storage.
Includes a spigot and oversized 2-piece Speidel airlock.
Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks
Suggested Applications:
12L: Perfect for storing small lots, making experimental batches and taking some of your beer or wine along with you to your next party.
20L: Ideal for secondary fermentation and storage of 5 gallon batches.
30L: The vessel for fermenting wine kits and 5 gallon batches of beer with plenty of headspace and no need for a blowoff tube.
60L: Perfect for fermenting larger batches of wine or 10 gallon batches of beer in a single container! Only 4" larger in diameter than a 6.5 gallon carboy!
120L: Ferment & Store large batches of anything - your creativity is the only limit!
Approximate Dimensions: 20in Diameter x 33in Height (w/out airlock in place). The maximum temperature that these plastic fermenters can handle is 140F.
**Please Note - The handles on the Speidel Plastic Fermenters are capable of handling a weight load of 66lbs each, or 132lbs when using both. They should not be used to move this unit when full.
FAQ:
Can filled containers be carried by the handles?
Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs).
Is there an upper limit on the alcohol content of the stored liquid?
In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out.
Up to what temperature can the containers be used?
For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).
Heavy-duty HDPE plastic fermentation and stoarge tank
Made from food-safe materials with extra thick walls to preserve the aroma of your beverage
Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid
Wide top port opening for easy cleaning
Airlock & stopper included
Made in Germany by Speidel
The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable.
Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you!
These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price.
Key Features:
Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass.
Small footprint and rectangular shape makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making.
Built-in handles make these tanks easy to move, even when full.
Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush!
All ports seal with gaskets and the vessel can be fully sealed for long-term storage.
Includes a spigot and oversized 2-piece Speidel airlock.
Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks
26"L x 18"W x 26"H, 11 lbs
FAQ:
Can filled containers be carried by the handles?
Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs).
Is there an upper limit on the alcohol content of the stored liquid?
In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out.
Up to what temperature can the containers be used?
For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).
Get on your way to making delicious beer with the FermZilla Flat Bottom Starter Kit. The kit includes the 30L Flat Bottom FermZilla as well as the most precious brewing tools you'll need when making your first batch and beyond. Bottle capper, hydrometer, bottling wand and more, all bundled together at an unbeatable price.
The FermZilla Flat Bottom Fermenter is an excellent option for making all kinds of beverages, from beer and wine to kombucha and cold brew coffee. It's compact, lightweight, and made of brilliantly smooth PET. The extra-large lid opening makes it easy to get your arm inside and scrub the walls clean after use. The Flat Bottom features the same lid as the Conical FermZilla's, so installing accessories like a thermowell or Temp Twister Cooling Coil couldn't be easier.
Why MoreBeer! loves the Flat Bottom FermZilla:
Super smooth PET makes cleaning very easy.
Tight-sealing lid and PET material make for a better oxygen barrier than fermenters made of HDPE.
Lightweight and easy to move around, yet strong enough to be considered shatterproof.
The 4.75" lid opening makes it easy to get your arm inside and clean after use.
The lid is designed for the easy installation of accessories such as a thermowell or cooling coil.
Affordable! The Flat Bottom is one of the most affordable plastic fermenters in this size range.
What's Included:
FermZilla 30L Flat Bottom Fermenter
3-Piece Airlock
Adhesive Thermometer
Adhesive Voume Marker
Siphon
Bottling wand
Beverage tag
(4) Sachets of cleaning powder
(100) Crown bottle caps
Bottle capper
Hydrometer
Bumper stickers
Specs:
30 L (7.9 gal) Total Volume
Temperature Rated to 122°F
Height - 18.5"
Height w/ Airlock - 22.5"
Tank Diameter - 13.75"
Lid Ports - 28 mm PCO 1881 threads
Please note: The Flat Bottom is not pressure rated and was not designed to carbonate in. For this reason, the lid does not come with a PRV like that which is included with the Conical FermZilla. The tank can withstand approximately 2 psi, but beyond that there is risk of deforming and damaging the tank.
Kegland Part number: KL13550
