Keep your beer on tap at-home pouring at its highest potential with beer faucets & parts from MoreBeer! These small yet important parts help to create a seal between the faucet and the shank, lock the faucet and even create friction when opening and closing the faucet. From beer faucets, to bonnets, to body gaskets, MoreBeer! carries all of the beer tap parts you’ll need to maintain the performance of your faucet.
Faucet shanks allow you to mount a draft faucet just about anywhere. Typically installed in the door or wooden collar of of a converted fridge/freezer, the front of a cooler, or even in your house’s wall when constructing that ultimate home bar! Once installed your beer line connects to the back of the shank and a faucet attaches to the front. Shanks are available in a range of sizes to accommodate mounting on materials of varying thicknesses. The shank’s listed size refers to the total length of threaded pipe. Approximately 1 1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project. Features a welded 3/16” barb and includes a glossy black plastic collar and locknut. Requires a 1” hole for installation. Dimensions: 6-1/4" - Total Length (Tip to Tip) 5-1/2" - Shank Length (Without Nipple) 4-1/8" - Thread Length 5-1/4" - Pass Through Length
$21.99
Keep your draft faucet in perfect working order. Replace the washer that seals the sliding shaft of your faucet to prevent leaks With this washer you can renew a worn-out part on your well-used draft faucet. This washer seals the sliding shaft, which often becomes brittle with age causing the faucet to drip.
$1.99
Keep your draft faucet in perfect working order. Replace your old ball washer to keep your faucet lever moving properly This is the first washer of a two part set (D1200C) With this washer you can renew a worn-out part on your well-used draft faucet. This replacement part is the first washer of a two part set that is used to control motion of lever.
$0.89
This chrome plated Draft Beer Faucet will keep your bar or kegerator looking great for years to come. Industry standard faucet for draft beer that fits North American shanks and towers Chrome Plated Brass body with quick action brass lever Specifications: Body Thread: 1 1/8” – 18 Thread (North American Beer Industry Standard) Lever Thread: 3/8” – 16 UNC (Unified Coarse Thread); FIts standard tap handles. Chrome Plated Brass Body Brass Lever
$24.99
This black plastic faucet is made in Germany and assembled in the United States. It is a very durable faucet made of the same food grade plastics as the CMB Disconnects. It features a stainless steel lever that will hold up to commercial handles. Black plastic body features a durable stainless steel lever Plastic spring-loaded shaft and chrome-plated brass bonnet and collar Standard threading is compatible with most branded tap handles Easy to clean design. Disassembles in seconds. Features food grade plastics for sanitary use with all beverages. Spout is removable and can be replaced with shorter spout for beer Used in commercial applications, bars and restaurants all over the world!
$31.99
This faucet is made in Germany and assembled in the United States. It is a very durable faucet made of the same food grade plastics as the CMB Disconnects. It features a stainless steel lever that will hold up to commercial handles. The creamer faucet lets you top a glass of beer with a perfect head for a great-looking presentation. Simply pull the lever forward to pour; then push it back to finish with a creamy head. Black plastic body features a durable stainless steel lever Plastic spring-loaded shaft and chrome-plated brass bonnet and collar Standard threading is compatible with most branded tap handles Features a "Creamer" action when handled is pushed back. Emulates the fine foam of a stout faucet. Easy to clean design. Disassembles in seconds. Features food grade plastics for sanitary use with all beverages. Spout is removable and can be replaced with longer spout for wine. This faucet can be used interchangeably for beer or wine. Used in commercial applications, bars and restaurants all over the world!
$42.99
The X1 Faucet has been used for many beverage dispense applications over the years including beer, soda, carbonated water and other beverages. This faucet is a great choice when you need to dispense very cold beer that might freeze a metal faucet. This configuration features a standard faucet lever, and an Allen Key Security flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Allen Key Security Adjustment Food Grade (NSF Approved) plastic and stainless steel Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in "Creamer" function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.
$49.99
1/4" tailpieces are ideally used with 3/16" draft line for a tight fit. If you'd prefer to use a different size tubing, the KOMOS S-style coupler for European kegs can also be purchased bare so you can mix and match your preferred tailpiece sizes. The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port. S-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)
$54.99
The X1 Faucet has been used for many beverage dispense applications over the years including beer, soda, carbonated water and other beverages. This faucet is a great choice when you need to dispense very cold beer that might freeze a metal faucet. This configuration features a standard faucet lever, and a lever flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Lever Adjustment Food Grade (NSF Approved) plastic and stainless steel Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in "Creamer" function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.
$57.99
1/4" tailpieces are ideally used with 3/16" draft line for a tight fit. If you'd prefer to use a different size tubing, the KOMOS coupler can also be purchased bare so you can mix and match your preferred tailpiece sizes. The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port. D-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)
$49.99
This 6 in. chrome shank comes with a back nut, plastic collar, and a welded 1/4" nipple. Requires a 1" hole saw for installation. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. This is a Chrome Plated Brass unit. Dimensions: 6-1/4" - Total Length (Tip to Tip) 5-1/2" - Shank Length (Without Nut & Nipple) 4-1/8" - Thread Length 5-1/4" - Pass Through Length
$21.99
You're in college and you would rather spend your money on more beer than a fancier tap. We get it. The Pony Pump is a compact air pump that fits any American sanke style keg. It is lightweight, has a pressure relief vent, 2' length hose and a plastic faucet. Also known as a keg coupler, coupling, or adapter.
$54.99
Beer Faucet Adapter (w/o Collar)
$6.09
Plastic hand pump with sanke tap built in. Also known as a keg coupler, coupling, or adapter.
$69.99
G-Type keg coupler for Anchor Steam and some other European kegs Pull-to-engage ergo lever handle Includes 3/8" OD barb for gas inlet Bass G style keg tap, also known as, keg coupler, coupling, or adapter. Fits Anchor Brewing kegs. Will also fit: Abbot Ale Anchor Liberty Ale Anchor Porter Anchor Steam Bass Pale Ale Blackthorne Cider Caffrey's Fuller's ESB Fuller's London Pride Grolsch Old Speckeled Hen Rouge Scottish Tennents Sir Perry William's Watney's Young's Young's Chocolate Stout Young's Oatmeal Stout Young's Ram Rod Bitter Young's Special London Ale
$109.99
Keep your draft faucet in perfect working order! Replace your old or broken friction bonnet to keep your fauce lever moving properly This friction Bonnet is the piece that sits between the Faucet and the Faucet Knob Lever Collar. Tightening it compresses a washer and creates resistance when opening and closing the faucet.
$3.99
This plastic faucet with a burgundy finish is made in Germany and assembled in the United States. It is a very durable faucet made of the same food grade plastics as the CMB Disconnects. It features a stainless steel lever that will hold up to commercial handles. Burgundy plastic body features a durable stainless steel lever Plastic spring-loaded shaft and chrome-plated brass bonnet and collar Standard threading is compatible with most branded tap handles Easy to clean design. Disassembles in seconds. Features food grade plastics for sanitary use with all beverages. Spout is removable and can be replaced with shorter spout for beer Used in commercial applications, bars and restaurants all over the world!
$31.99
The V10 stainless steel flow control faucet is designed and produced in Germany with some assembly completed in the United States. This faucet contains technology such as the "Closed Piston Chamber with Encapsulated Compression Spring" that allows for a perfect forward seal on the faucet, no beer trapped in dead space to cause the lever to stick, and the ability to push the faucet backwards for an extra creamy head. The compensator itself has an extra long cone for a wider range of compensation and designed to eliminate uncontrolled shifting of the compensator cone. This configuration features a black standard faucet knob, a polished stainless steel faucet lever, and a lever flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in “Creamer” function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.
$89.99
The V10 stainless steel flow control faucet is designed and produced in Germany with some assembly completed in the United States. This faucet contains technology such as the "Closed Piston Chamber with Encapsulated Compression Spring" that allows for a perfect forward seal on the faucet, no beer trapped in dead space to cause the lever to stick, and the ability to push the faucet backwards for an extra creamy head. The compensator itself has an extra long cone for a wider range of compensation and designed to eliminate uncontrolled shifting of the compensator cone. This configuration features a black standard faucet knob, a polished stainless steel faucet lever, and a lever flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in “Creamer” function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.
$89.99
You have seen 163 out of 163 products
