pH Meter

Water chemistry is key to brewing the best beer possible, and that's where a pH meter becomes an essential tool Measure your strike water's pH and make informed brewing salt additions to provide the ideal environment for enzymatic activity during the mash Digital display is easy-to-read and provides instant test results—no need to do a color comparison like with pH strips Automatic Temperature Compensation adjusts the results based on the temperature of the sample so you don't need to cool the sample before taking a reading Electrode is protected by a waterproof cap so your storage solution won't evaporate and dry out the electrode The KegLand pH Meter will get you a very accurate reading with its 0.01 pH resolution. The calibration process couldn't be easier to perform, just place the probe in the buffer solution closest to pH of the sample you'll be testing and press the button! This pH meter also includes ATC (Automatic Temperature Compensation) so you don't have to get your sample all the way down to room temperature before you take your reading. 3-point calibration allows this unit to be calibrated at three different standard levels - 4.00, 6.86 or 9.18. These standards are included with the pH meter, and refill packs are also available. The pH meter features a replaceable probe in case yours is lost or damaged. Homebrewing can be a tough environment for your pH probe so we feel you shouldn't have to buy a whole new pH meter everytime your probe breaks. The cap that holds the probe storage solution has a very tight seal and should prevent your probe from drying out while not in use. Don't worry about getting this meter wet either, because the entire unit is waterproof! Features: Replaceable probe ATC (Automatic Temperature Compensation) Waterproof electrode cap Accurate to 0.01 pH Easy 3 point calibration LR4/AG13 batteries included Kegland Part Number: KL04169 NOTE: Upon first time use prior to calibration, rehydration of the electrode with MT624Bis essential to get an accurate reading for correct calibration.

Read more less

Keep your KegLand pH Meter's probe in great condition by storing it in this storage solution.  Letting your probe dry is the leading cause of degradation.  By leaving your pH meter in this solution when not in use, you will extend the life of your probe and maintain more accurate readings. KegLand Part Number: KL04183

Read more less

Use buffer solutions to keep your pH meter calibrated. These are the same 3 solution powders that are included with the KegLand pen-style pH meter (MT624). We would strongly recommend if you haven't used your pH meter in a while to always use a buffer solution before you start your brew. Directions: Completely empty the powder into a clean glass jar Add 8.5 oz of deinoized water Stir until the powder has completely dissolved KegLand Part Number: KL06279

Read more less

Get an extremely accurate reading with this rugged bench-top pH meter. It offers the highest accuracy meter, with ATC, featuring a separate temperature probe for temperature readings independent of the electrode. The separate temperature probe allows you to check the temperature before submersing the electrode. Even though the name says "Bench-Top" it can easily be handheld. Temperature reading is in Celsius. For long term health of your electrode, use our highly recommended pH storage solution MT618. Features include: Automatic Temperature Compensation up to 50 C (122 F) 0.01 accuracy with a 0-14 pH range Push button calibration 2 year instrument warranty from Milwaukee 6 month electrode warranty 500 hour run-time on the battery Download the PDF

Read more less

One of the great features of the KegLand pH Meter is the replaceable probe. The probes of pH meters wear out through normal use. Instead of making you buy a whole new pH meter you can just get the probe! Kegland Part Number: KL04176

Read more less

A simple, low cost pH meter eliminates the guesswork of using pH strips.  Simple 1-point calibration, accuracy to 0.1 pH units, and a pH 0-14 range make this tester incredibly easy to live with. No more guessing at your mash pH! Includes calibration screwdriver, batteries and user manual. Milwaukee Part Number: pH600AQ  

Read more less

pH56 is a pocket pH meter with a lot of features. It has a resolution of 0.01 pH, a range of -2.00 to 16.00 pH, and an accuracy of 0.05 pH. It also reads temperature from 23.0 degrees F to 140 degrees F (-5.0-60 C), and has automatic temperature compensation. The unit is completely waterproof. The pH56 has a stability indicator and hold function that freezes the display for easy and accurate recording. The large display also has graphic symbols to guide you through the operations. Calibration is made automatically in 1 or 2 points with memorized standard and NIST buffer sets. Auto power off saves battery power after non-use. The double-junction electrode can be replaced in a very fast and simple way! The modular design allows easy electrode and battery replacement.   Milwaukee Part Number: pH56  

Read more less

pH indicator strips in the range of 1-14 pH. Use these wide range strips for general determination of the pH, or to reduce the range before using a narrow range pH testing strip. A color reference chart is located inside the booklet. 80 test strips per booklet.  

Read more less

Lab-Grade Precision, Portable Size: Achieve ±0.02 pH accuracy in a compact, handheld design. Durable, Glass-Free ISFET Sensor: Eliminates fragile glass electrodes, special storage, and tedious cleaning. IP67-Rated and Intuitive: Performs reliably in harsh, wet, and outdoor environments. Small Sample Volume: Requires only 0.5 mL of sample for precise measurement. Smart. Precise. Portable. pH2Go by Anton Paar delivers lab-grade pH precision in a compact, portable handheld that can be used anywhere with ease. A glass-free, ISFET sensor sidesteps the typical pain points of traditional electrodes - no fragile glass, no special storage, no tedious cleaning. Despite its compact size, pH2Go provides ±0.02 pH accuracy from just 0.5 mL of sample. And with an intuitive, IP67-rated design, it performs reliably in harsh or outdoor environments. Product Highlights ±0.02 pH accuracy from just 0.5 mL sample Glass-free, durable ISFET pH sensor Guided calibration (1 to 5 points) with ATC Fast readings (≈2 s) pH range 0.00–14.00; resolution 0.01 pH Temperature accuracy ±1% Easy to clean & store; Waterproof (IP67) Supports DIN, NIST, JIS & custom buffers Free app (iOS, Android & Web) for data visualization, storage & sharing Suitable for a Broad Range of Applications  Brewing Winemaking Hydroponics Agriculture Aquariums Pools Water & Wastewater Treatment Food Production Dairies Educational Labs Professional Labs Industrial Environments     Measurement Specifications Sensor Glass-free ISFET (Ion Sensitive Field Effect Transistor) Measuring range pH 0 to 14 Accuracy ±0.02 pH Resolution ±0.01 pH Calibration 1-, 2-, 3- and 5-point calibration Automated temperature compensated calibration (ATC) Yes Buffer types DIN, NIST, JIS, custom buffer sets Electrolyte solution gelled KCl Diaphragm porous PTFE Temperature accuracy 1 % Temperature resolution 0.1 °C (0.1 °F) Sample temperature range 0 °C to 80 °C (32 °F to 176 °F)   Device Specifications Sample volume 0.5 mL Dimensions (L x W x H) 108 x 64 x 35 mm (4.3 in x 2.5 in 1.4 in) Weight (incl. batteries) 125 g (0.28 lbs) Power supply 2x AAA 1.5V batteries (included) Enclosure rating IP67 according IEC 60529   Operating conditions Ambient temperature 10 °C to 40 °C (50 °F to 104 °F) Air humidity 5% to 95% relative air humidity, non-condensing Battery lifetime Approx. 10 000 measurements Storage temperature 10 °C to 40 °C (50 °F to 104 °F) Interface BluetoothTM Low Energy Mobile Operating System iOS & Android   Sample area Sample well PSU Diaphragm Porous PTFE Sensor ISFET O-ring FKM Housing PBT/PC  

Read more less

The Milwaukee MW151 MAX 3-in-1 PRO pH/ORP/Temp Bench Logging Meter is preferred by people testing all types of samples viscus or not, in a variety of applications that cause other pH meters and electrodes to fail.  The logging feature allows log-on-demand and log-on-stability features that ensure all readings are accurate and not entered incorrectly. The MA917B/1 Milwaukee double junction electode is refillable and easy to clean.  From brewers and wine makers to hydroponic growers, labs and water treatment, the MW151 MAX is your Bench Logging Meter for fast, accurate readings. Accuracy People choose the MW151 MAX 3-in-1 PRO pH/ORP/Temp Portable Logging Meter to improve the accuracy of their testing program. With up to 5 point calibration and 7 standard buffer choices (2 custom buffers also), the meter can be quickly calibrated to a higher accuracy compared with one or two point calibration. The MW151 MAX meter is accurate to ± 0.002 pH. 8 x more accurate than some alternative meters. The meter comes with a refillable, glass, double junction pH electrode and MA831R temperature sensor allowing the meter to automatically adjust the pH reading for the effect of temperature (ATC). The meter can also be used as a very accurate thermometer with accuracy +/-0.4°C (+/-0.8°F). Low Maitenance The MW151 MAX pH/OPR/Temp Bench Logging Meter comes with the Milwaukee glass, double junction MA917B/1 pH electrode. This is Milwaukee's top selling lab grade electrode for a reason. Designed to be both low maintenance (refillable) and able to withstand more challenging samples (double junction). The MA917B/1 is ideal for use in beer making, winemaking, hydroponics, laboratories and many other applications.  Features: Fast easy-to-read results with large duel level digital LCD readout. Extreme accuracy to ±0.002 pH | +/- 1 mV OPR | +/- 0.4°C (+/-0.8°F).  Extended pH range (-2.00 pH to 20.00 pH / -2.000 to 20.000 pH). Lightweight, sleek design with small benchtop footprint. Simple easy-to-use logging and USB download functions, manual or on stability up to 1,000 logs. Electrode diagnostics feature checks and displays the condition of the pH electrode.  Easy measurement: just place the electode and temperature probe in the sample, gently stir and wait for the reading to stabilize. Simple push button, automatic up to 5 point calibration for increased accuracy. Up to 7 Standard calibration solutions (1.68, 4.01, 6.86,7.01, 9.18, 10.01 and 12.45) and 2 custom choices. Refillable, glass, double junction lab grade pH electrode for low maintenance and high performance with a screw on cap to ensure proper storage. Built-in rechargeable battery with 8 hours battery life (battery included). Selectable Auto-off feature.  Alphanumeric LCD display messages for friendly, intuitive information, warnings and error messages. Internal clock date to keep track of different time-dependent functions (calibration, timestamp,calibration time out). 3 feet probe cables for extra flexibility when testing. Care and Use pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction. Sensing Bulb The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes. Reference Junction The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH electrode will no longer function. You can extend the life of your pH electrode in the following ways. Storage To minimize clogging the pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged. Storing in pH probe storage solution or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe. The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage. Cleaning and Maitenance Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution. Also: Inspect the electotrode for damage or scratches, if present replace the electrode. Inspect the cable.  The connection cable and insulation must be intact. Connectors should be clean and dry. Rinse off salt deposits with water or DI water. Calibration The pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO Plus pH meter accurate. Also, calibrate after cleaning or a long period of storage. Specifications: pH Range: -2.00 to 20.00 pH / -2.000 to 20.000 pH ORP Range: ±2000.0 mV Temp. Range: -20.0 to 120.00°C (-4.0 to 248.0°F) Resolution: 0.01 pH / .001 pH Resolution: 0.1mV Resolution: 0.1°C / 0.1°F) Accuracy: ±0.01 pH / ±0.002 pH @ 25°C / 77°F Accuracy: ±1mV Accuracy: ±0.4°C |±0.8°F pH Calibration: up to 5 point automatic pH calibration | 7 standard buffers (pH 1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45) and two custom buffers Temperature Compensation: Automatic, -20.0 to 120.0°C (-4.0 to 248.0°F) or manual pH electrode: MA917B/1 glass, double junction pH electrode (supplied) Temperature probe: MA831R (included) Logging: Maximum 1,000 samples (stored in up to 100 lots) / on demand, 200 samples on stability, 200 samples/ Interval logging, 1000 logs PC Connectivity: 1 USB Port, 1 micro USB port Power supply: 12VDC, 5 VDC USB Adapter (included) Battery life: Approx. 8 hours of use Auto-off: Selectable 5, 10, 30, 60 min. or off Environment: 0 to 50°C / 32 to 122°F; max RH 95% Dimensions: 230 x 160 x 95 mm (9.0 x 6.3 x 3.7 inches) Weight: 0.9 kg / 2.0 lbs.    

Read more less