Commercial Kombucha Equipment

New Corny Keg ready to use right out of the box New Kegs are trouble-free for years Rubber top and bottoms protect floors from dings Lid includes a tab wth hole welded in so you can hang anything from lid (dry hop our favorite) 304 Stainless Steel and great welds, this will last a tifetime Features Low2 Keg Lid O-ring which offers a 96% reduction in oxygen ingress compared to silicone Ditch the bottles and start kegging today! Save time, reduce the risk of infection and get all those bottles out of the kitchen for good! Brand new 5 gallon Kegland kegs offer convenience, security and insurance when compared to used or reconditioned kegs. There's no need to replace gaskets or other parts, no need to trust that someone else did a good job with reconditioning, and no possibility of residual flavor or aromas getting into your beer! Features: Ball lock 130 PSI Operating Pressure 5 Gallon (19 L) Capacity Dry Hop Tab Welded into Lid 304 Stainless Steel Dimensions: Height: 24.75 in. Diameter: 8.375 in. Kegland Part Number: KL02899

Read more less

Achieve consistent and optimal fermentation temperatures with the FermWrap Fermentation Heater. This flexible and easy-to-use unit wraps snugly around your fermenter, providing gentle and controlled heat. Use alone or simply plug into the 110V heatnig plug on most popular temp controllers Provides gentle, even heating with 40 watts spread over almost two square feet Keep your yeast happy and your ferment warm during those cold winter months with this flexible heater wrap! Don't be fooled by imitators and cheap knock-offs, this is the original FermWrap that has been produced by Fermentap for over a decade. Unlike those old heater belts, the FermWrap covers a wide area of your carboy or fermentation vessel, promoting an even heat distribution. Using tape to adhere, the FermWrap can be attached directly to your fermenter, or can be used to heat the space in a box (or refrigerator) that the fermenter is in. Depending on your configuration and insulation, you can increase the temperature of your ferment from 5-20°F. This differential can be increased by using the BrewBuilt™ Neoprene Carboy Sleeve.   With 40 watts of heat spread over almost two square feet, it provides gentle, even heating.   For more precise results, we recommend a temp controller and carboy thermowell. The controller will monitor the fermentation temp and only power on the FermWrap if the temperature drops below your set point. For the ultimate level of control, we recommend pairing it with the BrewBuilt CoolStix™ to provide cooling. With both accessories plugged into the temp controller, you'll get cooling or heating whenever you need it.   Specs: 40 watts 115V 11" H x 25" W   Item does not include carboy as pictured.   Kegland Part number: KL06255 

Read more less

Heavy-duty HDPE plastic fermentation and stoarge tank Made from food-safe materials with extra thick walls to preserve the aroma of your beverage Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid Wide top port opening for easy cleaning Airlock & stopper included Made in Germany by Speidel The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable. Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you! These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price. Key Features: Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass. Small footprint makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making. Built-in handles make these tanks easy to move, even when full. Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush! All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Includes a spigot and oversized 2-piece Speidel airlock. Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks Suggested Applications: 12L: Perfect for storing small lots, making experimental batches and taking some of your beer or wine along with you to your next party. 20L: Ideal for secondary fermentation and storage of 5 gallon batches. 30L: The vessel for fermenting wine kits and 5 gallon batches of beer with plenty of headspace and no need for a blowoff tube. 60L: Perfect for fermenting larger batches of wine or 10 gallon batches of beer in a single container! Only 4" larger in diameter than a 6.5 gallon carboy! 120L: Ferment & Store large batches of anything - your creativity is the only limit! Approximate Dimensions: 15.75in Diameter x 24in Height (w/out airlock in place). The maximum temperature that these plastic fermenters can handle is 140F. Approx. 17in Diameter including handles. **Please Note - The handles on the Speidel Plastic Fermenters are capable of handling a weight load of 66lbs each, or 132lbs when using both. Therefore, they can be used to move this unit when full. FAQ: Can filled containers be carried by the handles? Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs). Is there an upper limit on the alcohol content of the stored liquid? In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out. Up to what temperature can the containers be used? For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).

Read more less

Get an extremely accurate reading with this rugged bench-top pH meter. It offers the highest accuracy meter, with ATC, featuring a separate temperature probe for temperature readings independent of the electrode. The separate temperature probe allows you to check the temperature before submersing the electrode. Even though the name says "Bench-Top" it can easily be handheld. Temperature reading is in Celsius. For long term health of your electrode, use our highly recommended pH storage solution MT618. Features include:   Automatic Temperature Compensation up to 50 C (122 F) 0.01 accuracy with a 0-14 pH range Push button calibration 2 year instrument warranty from Milwaukee 6 month electrode warranty 500 hour run-time on the battery   Click here for a PDF of the MoreBeer Manual on proper pH Meter care.

Read more less

Brand-new stainless steel beer keg with US-standard MicroMatic D System Spear Sixth Barrel Keg holds 55x 12 oz beers or 41x 16 oz pints Compact and easy to fit multiple kegs in home kegerators or keezers Commercial quality construction—produced and tested in an ISO 9001 Certified facility Supply your brewery with the best kegs on the market with these 5.16 gallon 1/6 Barrel US Sanke Kegs. Our kegs are produced and tested for quality in an ISO 9001 Certified facility, abiding by strict quality control standards. Each keg is constructed entirely of Stainless Steel, ensuring a long serving life for your brewery. The sixth barrel keg, commonly referred to as a sixtel keg, is a great option for bars and restaurants that want to offer a variety of beers but don't have the space for multiple full size kegs. They're also a great option for kegerators, as two or three sixtels will fit inside depending on the model. Holds 55 x 12 oz beers (41 x 16 oz pints). Features: 5.16 gal (1/6 bbl) US Sanke keg 304 Stainless Steel Construction 23" Height, 9.25" Diameter MicroMatic D System (U.S. Sankey) Spear Working pressure is 43.51 psi (3.0bar)  

Read more less

Heavy-duty HDPE plastic fermentation and stoarge tank Made from food-safe materials with extra thick walls to preserve the aroma of your beverage Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid Wide top port opening for easy cleaning Airlock & stopper included Made in Germany by Speidel The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable. Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you! These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price. Key Features: Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass. Small footprint makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making. Built-in handles make these tanks easy to move, even when full. Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush! All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Includes a spigot and oversized 2-piece Speidel airlock. Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks Suggested Applications: 12L: Perfect for storing small lots, making experimental batches and taking some of your beer or wine along with you to your next party. 20L: Ideal for secondary fermentation and storage of 5 gallon batches. 30L: The vessel for fermenting wine kits and 5 gallon batches of beer with plenty of headspace and no need for a blowoff tube. 60L: Perfect for fermenting larger batches of wine or 10 gallon batches of beer in a single container! Only 4" larger in diameter than a 6.5 gallon carboy! 120L: Ferment & Store large batches of anything - your creativity is the only limit! Approximate Dimensions: 20in Diameter x 33in Height (w/out airlock in place). The maximum temperature that these plastic fermenters can handle is 140F. **Please Note - The handles on the Speidel Plastic Fermenters are capable of handling a weight load of 66lbs each, or 132lbs when using both. They should not be used to move this unit when full. FAQ: Can filled containers be carried by the handles? Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs). Is there an upper limit on the alcohol content of the stored liquid? In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out. Up to what temperature can the containers be used? For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).

Read more less

The Slimline Torpedo Keg series features a smaller diameter to maximize the space in your kegerator or keezer Low2 lid O-ring reduces oxygen ingress by 96% compared to silicone O-rings when measured in a keg! Brand new, all-stainless construction ball lock keg Stackable with ball lock quick disconnects in place Etched In and Out labels near the keg posts for easy identification Rolled handles for a comfortable grip Made by an ISO certified commercial keg manufacturer with high-quality laser welded seams Torpedo Kegs too wide? Want to squeeze another keg in your kegerator? The patented design, D794,899, of the Slimline Torpedo Keg is 9% more slim than the classic model with all the same great features. Coming in at about 1/4" thinner than standard Ball Lock Cornelius Kegs, this keg has welded stainless handles and the ability to stack kegs with fittings still in place all at a great price. Quality First Here at MoreBeer! we love nothing more than quality interior welds. We've spent a decade rejecting kegs made overseas because the interior welds have never met our standards. If a weld is not perfect and shows evident burn marks along with nooks and crannies it cannot be sanitized effectively. Torpedo kegs are machine welded and exceed our standards for quality. This weld quality is possible because these kegs are made by an ISO certified commercial keg manufacturer. Cool Features Torpedo Kegs were designed to stack with Ball Lock quick disconnects in place and serving which is a cool feature for some brewers who have vertical space in their refrigerator. We also like the rolled stainless steel handles. They are comfortable to grab and will never come off like some rubber handles can over time. “In” and “Out” is etched near the keg posts for easy identification which is very handy when you are connecting lines in a refrigerator or kegerator and trying not to make a mistake. Low2 Keg Lid O-ring Give your beverage the absolute best protection from oxygen staling with the Low2 keg lid O-ring. Even the most perfectly sealed keg is susceptible to oxygen ingress through the hatch O-ring—yes, even if the keg is under constant pressure with CO2! Even a leak-free, pressurized keg will release CO2 molecules as they pass through the lid O-ring itself, and conversely, Oxygen molecules will permeate through the O-ring and diffuse into the keg when they reach the surface area on the other side. The level of permeability is wide ranging and highly dependent on what material the O-ring is made from. Rather than the usual EPDM or Silicone, Low2 gaskets are made from a unique composition of Synthetic M-Class and Cross-Link Elastomers. This special blend has superior oxygen barrier properties that results in your beverage staying fresher for longer. Taking your keg on the go? Don't leave home without a custom tailored Slimline Torpedo Keg Sleeve! Specifications: Max Pressure: 130 psi PRV Rating: 85 psi High Quality Laser Welded Seams ISO9001 Quality Assurance Made from 304 Stainless Steel Dimensions:   Height (in.) Diameter (in.) 1.5 Gal 11 8 3/8 2.5 Gal 15 5/8 8 3/8 5 Gal 25 1/2 8 3/8   For a slightly shorter keg, see our Standard Torpedo Kegs!  

Read more less

Brand-new stainless steel beer keg with US-standard MicroMatic D System Spear Half Barrel Keg holds 165x 12 oz beers or 124x 16 oz pints Ideal for large-batch brewers where you want to clean and sanitize as few kegs as possible Commercial quality construction—produced and tested in an ISO 9001 Certified facility Supply your brewery with the best kegs on the market with these Full Size 15.5 gallon Half Barrel US Sanke Kegs.  Our kegs are produced and tested for quality in an ISO 9001 Certified facility, abiding by strict quality control standards.  Each 15.5 gal keg is constructed entirely of Stainless Steel, ensuring a long serving life for your brewery. Holds 165 x 12 oz beers (124 x 16 oz pints). Features: Full Size 15.5 gal (1/2 bbl) US Sanke keg 304 Stainless Steel Construction 23.25" Height, 16.8" Diameter Produced in an ISO 9001 Certified Facility Drop In spears produced by MicroMatic Working pressure is 43.51 psi (3.0bar)  

Read more less

No capper required! Make your bottling day easier by skipping the capping step all together The perfect bottle for a wide range of homemade beverages including beer, cider, mead, kombucha, and more! Pressure rated to 100 PSI which means they can easily handle the carbonation of soda pop and hard seltzer E.Z.Cap is the authentic North American swing-top glass bottle manufacturer The included Swing Top closure is reusable and can be replaced as needed These swing top bottles are a revolution in beer bottling!  The convenience of a swing top, hybridized with the storage capabilities of a standard crown cap; Meet the EZ Cap Bottle.  These swing tops are designed to be primarily sealed with a crown cap closure for long term storage.  Once you crack your brew for consumption however, you have the swing top in place to close it back up if need be!  Whether you're too distracted with other fine brews to taste, or just need to wait your turn at the beer pong table, this is a perfect system for you.  Bottles rated to 100 PSI. Case of 12 x 32 oz Flint (Clear) EZ Cap Bottles and 12 Swing Tops.  Crown Caps not included (see recommended items below for options).

Read more less

Want an easy-to-use, stainless vessel that ferments and carbonates? This 58L/15.3 Gallon keg has been modified to allow you to do both! The top is fitted with a large 4 inch tri-clamp lid with two ball lock posts and a pressure relief valve. You can use this vessel to ferment, carbonate, serve, or push the beer through a filter. The posts are recessed which allows you to stack these kegs up to 4 high. A 4" T.C. end cap with pre drilled hole is also available (H691), which can be paired with a #3 stopper and airlock. Also consider the Kegmenter Hop Bong Pressure Pack which allows for oxygen-free dry hopping and also features ball lock posts for Gas & Liquid. Depending on how long it will take to consume the finished beer, we recommend using two kegmenters, one for fermentation and one for carbonating and serving. After fermentation, there will be a large trub cake at the bottom of the vessel. Leaving finished beer on the trub for too long (2-3 weeks) may eventually lead to off-flavors. Check out our ball lock jumper line (KEG575) to easily transfer from one kegmenter to the other. Also consider our beer filter kit (FIL40), which will allow you to filter the beer during transfer. Features: Rated up to 2.5 BAR (36 psi) 4" T.C. lid with ball lock posts Floating dip tube Stainless steel 1.8 mm thick Use: As a stainless steel fermenter that is easy to clean Great choice for 10 gallon fermentations Easy to pressurize the kegmenter after fermentation to push through a filter and into another keg Fermenting under pressure, allowing CO2 to exit via the relief valve, reduces esters and fusel alcohol production allowing you to ferment at warmer temperatures Distillation - with the addition of a T.C. reducer and condenser (H701 / DS120 / DS130) As a cellar keg for topping up barrels   Warning: Always depressurize keg before removing lid. Does not come with spunding valve show in example photo. See FIL42A. Kegland Part number: KL04572

Read more less

Brand-new stainless steel beer keg with US-standard MicroMatic D System Spear Slim Quarter Keg holds 82x 12 oz beers or 62x 16 oz pints A good middle-ground size with high-capacity but small enough to fit multiple kegs in larger kegerators or keezers Commercial quality construction—produced and tested in an ISO 9001 Certified facility Supply your brewery with the best kegs on the market with these 7.75 gallon 1/4 Barrel US Sanke Kegs. Our kegs are produced and tested for quality in an ISO 9001 Certified facility, abiding by strict quality control standards. Each keg is contructed entirely of Stainless Steel, ensuring a long serving life for your brewery. The quarter barrel keg, commonly referred to as a slim quarter or tall quarter keg, is a great option for bars and restaurants that want to offer a variety of beers but don't have the space for multiple full size kegs. Holds 82 x 12 oz beers (62 x 16 oz pints). Features:   7.75 gal (1/4 bbl) US Sanke keg 304 Stainless Steel Construction 23" Height, 11.5" Diameter MicroMatic D System (U.S. Sankey) Spear Working pressure is 43.51 psi (3.0bar)  

Read more less

It may just look like an oversized keg at first glance, but the 1 bbl Kegmenter can do so much more! These stainless steel vessels are perfect as a pressure fermentation vessel, storage brite tank, or even a large-batch home still. Welded tri-clamp openings offer versatility for rigging up this unit however you see fit. Large 4" tri-clamp opening at the top and two 2" tri-clamps ports at the bottom. The large 4" opening at the top makes it easy to get inside the keg for cleaning, and the 2" ports at the bottom can be fitted with valves, heating elements, or other TC accessories and fittings. The kegmenter is well suited for use as a fermenter, brite tank, or top-up barrel. The 1 bbl Kegmeneter comes with end caps and clamps to plug the bottom ports, and a pre-drilled 4" cap for the top opening with a stopper and airlock included. You also have the option to use the Ball Lock Post lid with floating dip tube, which can be used for pressure fermentations or transfers. Also a 4" x 2" TC reducer would allow for adding a Reflux or Pot Still for distillation. Also consider the Kegmenter Hop Bong Pressure Pack which allows for oxygen-free dry hopping and also features ball lock posts for Gas & Liquid. Specifications: Volume: 1 bbl (31 gal) Working Pressure: 3 bar (43.5 psi) Made from stainless steel 41" H x 15.5 Ø   Kegland Part number: KL04541  

Read more less

Want an easy-to-use, stainless vessel that ferments and carbonates? This 50L/13.2 Gallon keg has been modified to allow you to do both! The top is fitted with a large 4 inch tri-clamp lid with two ball lock posts and a pressure relief valve. You can use this vessel to ferment, carbonate, serve, or push the beer through a filter. The posts are recessed which allows you to stack these kegs up to 4 high. A 4" T.C. end cap with pre drilled hole is also available (H691), which can be paired with a #3 stopper and airlock. Also consider the Kegmenter Hop Bong Pressure Pack which allows for oxygen-free dry hopping and also features ball lock posts for Gas & Liquid. Depending on how long it will take to consume the finished beer, we recommend using two kegmenters, one for fermentation and one for carbonating and serving. After fermentation, there will be a large trub cake at the bottom of the vessel. Leaving finished beer on the trub for too long (2-3 weeks) may eventually lead to off-flavors. Check out our ball lock jumper line (KEG575) to easily transfer from one kegmenter to the other. Also consider our beer filter kit (FIL40), which will allow you to filter the beer during transfer. Features: Rated up to 2.5 BAR (36 psi) 4" T.C. lid with ball lock posts Floating dip tube Stainless steel 1.8 mm thick Use: As a stainless steel fermenter that is easy to clean Great choice for 10 gallon fermentations Easy to pressurize the kegmenter after fermentation to push through a filter and into another keg Fermenting under pressure, allowing CO2 to exit via the relief valve, reduces esters and fusel alcohol production allowing you to ferment at warmer temperatures Distillation - with the addition of a T.C. reducer and condenser (H701 / DS120 / DS130) As a cellar keg for topping up barrels   Warning: Always depressurize keg before removing lid. Does not come with spunding valve show in example photo. See FIL42A. Kegland Part number: KL04565

Read more less

Premium Counter-Pressure Bottle filler that is designed for the smaller craft brewer or dedicated homebrewer to help make bottling day faster and more efficient The four separate filling heads have individual Stainless Steel 3-way control valves that allow for quick fill rates Only requires one person to operate A single PRV provides equal backpressure on all heads resulting in matching flow rates without adjustment Individual purge valves on each fill head allow for nearly all oxygen removal in a bottle, ensuring that the beer stays fresh for longer The removable drip tray is fully draining with a barbed outlet for constant filling and easy cleaning A purge valve on the reservoir helps make sure that foam never builds up 304 Stainless Steel Construction and easy-to-use functionality, all resulting in a top-of-the-line bottle filler Introducing the newly redesigned and updated G2 Medusa Multihead Counter Pressure Bottle Filler!  This unique unit was designed in-house by the MB Pro Engineering team and purpose built for the smaller craft brewer or dedicated homebrewer.  The Medusa will speed up bottling day while also reducing exposure to oxygen during the bottling process, resulting in higher quality beer with a longer shelf life.   The Medusa Multihead Counter Pressure Bottle Filler can be adjusted to cater all bottling needs.  All four heads can be operated individually, and the height, back pressure, and fill speeds can be adjusted for various bottle styles.  We've done our best to pack this unit with features that will handle all jobs, while keeping costs as low as possible.  Features: 3-way stainless steel valves on both inlet & back pressure sides of all fill heads. Improved Pressure Relief Valve has higher accuracy over fill rates, and directs foam into the drip tray rather than onto your bottles. Robust stainless steel frame stands on its own or can be easily bolted or clamped to a work surface Stainless steel fill reservoir keeps fill rates equal & reduces foaming Inverted fill tubes & reservoir purge means cleaner filling with even less possibility for foam. Dual TC Fill reservoir is easier to clean & allows for upgrades down the road (as they become available). Easily adaptable to fill from nearly any pressurized vessel. Height is adjustable from shorty bottles to growlers.  Easy disassembly for cleaning, storage & maintenance,  Sanitary 1.5" TC inlet for beer (Clamp and Gasket sold separately)  3/8" tube connection for CO2. Backpressure Bar allows for a single adjustment point for fill rates. No more adjusting PRVs on each fill head. Minimum Bottle Height: 6.9" Maximum Bottle Height: 16.5" Maximum Working Pressure: 15 PSI Dimensions:  Footprint: 26-3/8" L x 8" W Drip Tray: 23-1/2" L x 5-1/2" W Overall Height: 25-3/8"   Please Note: Filler valves include a Teflon gasket. Do not soak the valves in PBW which can corrode Teflon material after prolonged contact.

Read more less

High-quality stainless steel fermentation and storage tank Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress Impeccable 2R (IIId) surface finish for easy cleaning A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid Made in Germany by Speidel This new universal cask from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids.  These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary.  These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life. Great for storage of wine, cider, juice, kombucha, or whatever else you may be making in 25 gallon batches! Features: 304 SS construction IIId surface finish - easy cleanup 95 l (25.1 gal) volume Gasketed sealed tanks - no oxygen permeation during storage 68 cm (26.7") Height x 44 cm (17.3") Ø German quality construction with 25 year warranty Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting

Read more less

Premium quality laser-welded 304 stainless steel closed tank  Made in Germany by Speidel and backed by a 25-year warranty Ideal for spirits and fermented beverages like wine, beer, cider, and kombucha. Ultra-smooth 2R interior finish allows for easy cleaning with cold water Outfitted with a 6-bar max cooling jacket for efficient glycol cooling 1.5” tri-clamp ports with two additional DIN ports for included thermometer/thermowell combo and sample valve The top lid provides a convenient opening for additions and the legs provide easy access to the bottom ports Vaulted complete drainage bottom for maximum product yield and easy cleaning We are proud to present these FD storage tanks made of premium quality 304 stainless steel. Built in Germany by Speidel and sold exclusively in the USA by MoreWine! Pro for over 20 years, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality, and price, these tanks represent the very best value available in stainless steel beer storage. Safely store small volumes of product in these beautiful tanks. The legs make accessing the ports easy and the convenient top hatch makes cleaning a dream when combined with the 2R interior finish. Heavy-duty sealing mechanism and gasket form a seal on top with a stainless steel lid equipped with a T.C. port for adding accessories or an airlock. The inside is finished to Speidel quality standards with flawless welds and a 2R finish.  The tanks will support a few PSI of pressure, however, they are not pressure-rated or designed to be used under pressure.  Tank Ports Tanks feature 1.5" T.C. outlets (1 on bottom for complete drainage, one in middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. One DIN port is equipped with an included sample valve and the other has an included thermometer and thermowell combination.  The cooling jackets have two 1” NPT ports. Speidel Quality Features Full Jacket - These tanks are equipped with a max cooling jacket rated to 6-bar. This will allow you to hook it into a glycol system for complete temperature control. Interior Finish - Speidel tanks feature an ultra-smooth 2R interior surface which allows you to clean your tanks with cold water, without scrubbing. This saves significant labor costs. Weld Quality - Speidel's robotic-arm laser welders create flawless stainless-to-stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual products to harbor spoilage organisms. Warranty - Speidel and MoreWine! Pro back up each and every tank with an industry-leading 25-year warranty against defects in materials or workmanship. Thickness - Speidel tanks are on average around 25% thicker than Italian-manufactured tanks of the same general capacity and dimensions. Complete Drainage Bottoms - These tanks are outfitted with vaulted bottoms for total drainage, which maximizes product yield at racking and makes cleaning a snap.  Tank Features: Full Volume of 240 L (63.4 gal) Perfect for blending two barrels of wine 1.5" T.C. Drain, Racking Port, and Lid outlet 8.5" Top hatch for easy cleaning and additions 2 X DIN10 Fittings w/ Sample Valve and Thermowell/Thermometer combo 2 x 1" NPT Ports on the jacket Tank Dimensions: 550mm D x 1524mm H (21.6" D x 60" H)

Read more less

Suitable for carbonated beverages such as beer and kombucha Purges with CO2 prior to filling Adjustable shelf to accommodate cans up to 11.5" tall and 4" in diameter Made to order in the United States The XF4400 can filler is designed for the Artisan Craft Person looking to fill cans with carbonated beverages in a simple and affordable manner. The filler can accommodate most cans sizes with its adjustable shelf, allowing great flexibility, and is suitable for carbonated beverages such as beer and kombucha.  The XF4400 is based on the XpressFill Level Filler with modified valves and flow path diameters resulting in a much better flow of product with less foaming and better CO2 retention. The filler will accommodate cans up to 4 inches in diameter and up to 11.5 inches tall. Each bottle filler is hand built to order in the California factory. Lead times average about 3 weeks. Features & Specifications: 600 cans per hour capacity (12 oz) All materials in the beverage flow path are FDA certified as food grade for contact with alcohol Maximum Can Dimensions: 4" D x 11.5" H Maximum Operating Pressure: 12 psi Weight: 34 lbs Dimensions: 16" wide x 17" high x 15.5" deep Requires 0.7A of 115V 50/60Hz power  

Read more less

High-quality stainless steel fermentation and storage tank Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress Impeccable 2R (IIId) surface finish for easy cleaning A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid Made in Germany by Speidel This new universal cask from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids.  These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary.  These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life. Great for storage of wine, cider, juice, kombucha, or whatever else you may be making in 12 gallon batches! Features: 304 SS construction IIId surface finish - easy cleanup 45 l (11.8 gal) volume Gasketed sealed tanks - no oxygen permeation during storage 55 cm (21.7") Height x 35 cm (13.8") Ø German quality construction with 25 year warranty Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting

Read more less

High-quality stainless steel fermentation and storage tank Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress Impeccable 2R (IIId) surface finish for easy cleaning A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid Made in Germany by Speidel This new universal cask from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids.  These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary.  These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life. Features: 304 SS construction IIId surface finish - easy cleanup 60 l (15.9 gal) volume Gasketed sealed tanks - no oxygen permeation during storage 69.2 cm (27.2") Height x 35 cm (13.8") Ø German quality construction with 25 year warranty Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting  

Read more less

Variable capacity tank well-suited for fermentation, short-term wine storage, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Tank & lid are made from 304 stainless steel with a food-grade, clear plastic gasket for the lid Air pump with pressure gauge, dry airlock, and spigot are included Made in Italy by Marchisio Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.  Considerations for Winemaking When used in winemaking we recommend these tanks for fermentation and short-term storage. If you are considering storing wine in a variable volume tank for longer than a month, we suggest you consider our German-made Speidel Variable Volume Tanks. In addition to other quality features like a mirror polish inside, thicker stainless, and robotically welded seams, Speidel tanks feature a proprietary lid gasket that only fits their tanks.  This gasket is made from a very high quality, thick, white, food-grade, material that makes a true seal and resists oxygen transfer. This gasket also does not have the seam line that clear gaskets have. To learn more about the clear gaskets watch our video listed below the product copy.  All variable volume tanks other than those from Speidel, including these tanks from Marchisio, feature a standard clear gasket that is sufficient for many applications, but we do not recommend them for long term wine storage.  Marchisio We have been buying tanks from Marchisio since the 1990’s, so we have a long history of collaboration.  Marchisio is a classic Italian tank manufacturer that represents the best value in the industry. Great quality at a very competitive price. All tanks have a classic marbled finish on the outside and a smooth polished finish on the inside.  Each tank includes a dry airlock – a style of airlock that has a marble inside to make a seal. We recommend replacing this airlock with a classic water airlock to reduce potential oxidation. Includes 1/2" chrome plated spigot. Includes: 304 Stainless Tank 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dry Airlock for tank Chrome Plated Spigot 200L Specifications: Nominal volume: 200 Liters (52.8 gallons) Effective volume: 200 Liters (52.8 gallons) Diameter: 50 cm (20 inches) Height: 120 cm (47 inches) Valve size: 1/2" BSP Thickness (Bottom X side, in mm): 1.0 X 0.7 *Please Note: Tank may differ slightly from image shown. Stands are sold separately.  

Read more less

High-quality stainless steel fermentation and storage tank Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress Impeccable 2R (IIId) surface finish for easy cleaning A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid Made in Germany by Speidel This new universal cask from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids.  These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary.  These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life. Features: 304 SS construction IIId surface finish - easy cleanup 120 l (31.7 gal) volume Gasketed sealed tanks - no oxygen permeation during storage 88 cm (34.7") Height x 44 cm (17.3") Ø German quality construction with 25 year warranty Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting  

Read more less

Variable capacity tank well-suited for fermentation, short-term wine storage, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Tank & lid are made from 304 stainless steel with a food-grade, clear plastic gasket for the lid Air pump with pressure gauge, dry airlock, and spigot are included Made in Italy by Marchisio Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.  Considerations for Winemaking When used in winemaking we recommend these tanks for fermentation and short-term storage. If you are considering storing wine in a variable volume tank for longer than a month, we suggest you consider our German-made Speidel Variable Volume Tanks. In addition to other quality features like a mirror polish inside, thicker stainless, and robotically welded seams, Speidel tanks feature a proprietary lid gasket that only fits their tanks.  This gasket is made from a very high quality, thick, white, food-grade, material that makes a true seal and resists oxygen transfer. This gasket also does not have the seam line that clear gaskets have. To learn more about the clear gaskets watch our video listed below the product copy.  All variable volume tanks other than those from Speidel, including these tanks from Marchisio, feature a standard clear gasket that is sufficient for many applications, but we do not recommend them for long term wine storage.  Marchisio We have been buying tanks from Marchisio since the 1990’s, so we have a long history of collaboration.  Marchisio is a classic Italian tank manufacturer that represents the best value in the industry. Great quality at a very competitive price. All tanks have a classic marbled finish on the outside and a smooth polished finish on the inside.  Each tank includes a dry airlock – a style of airlock that has a marble inside to make a seal. We recommend replacing this airlock with a classic water airlock to reduce potential oxidation. Includes 1" chrome plated valve.  This valve has ENO style threads at the outlet, but you can use this white plastic barb adapter to easily attach transfer tubing. Alternatively, the included spigot can be replaced with a BSP ball valve in order to convert the connection to tri-clamp or other preferred connection types.   Includes: 304 Stainless Tank 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dry Airlock for tank Chrome Plated Valve 500L Specifications: Nominal volume: 500 Liters (132.0 gallons) Effective volume: 500 Liters (132.0 gallons) Diameter: 80 cm (31 inches) Height: 110 cm (43 inches) Valve size: 1" BSP (straight thread) x 30 Eno Thickness (Bottom X side, in mm): 1.0 X 0.7 *Please Note: Tank may differ slightly from image shown. Stands are sold separately.  

Read more less

Variable capacity tank well-suited for fermentation, short-term wine storage, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Tank & lid are made from 304 stainless steel with a food-grade, clear plastic gasket for the lid Air pump with pressure gauge, dry airlock, and spigot are included Made in Italy by Marchisio Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.  Considerations for Winemaking When used in winemaking we recommend these tanks for fermentation and short-term storage. If you are considering storing wine in a variable volume tank for longer than a month, we suggest you consider our German-made Speidel Variable Volume Tanks. In addition to other quality features like a mirror polish inside, thicker stainless, and robotically welded seams, Speidel tanks feature a proprietary lid gasket that only fits their tanks.  This gasket is made from a very high quality, thick, white, food-grade, material that makes a true seal and resists oxygen transfer. This gasket also does not have the seam line that clear gaskets have. To learn more about the clear gaskets watch our video listed below the product copy.  All variable volume tanks other than those from Speidel, including these tanks from Marchisio, feature a standard clear gasket that is sufficient for many applications, but we do not recommend them for long term wine storage.  Marchisio We have been buying tanks from Marchisio since the 1990’s, so we have a long history of collaboration.  Marchisio is a classic Italian tank manufacturer that represents the best value in the industry. Great quality at a very competitive price. All tanks have a classic marbled finish on the outside and a smooth polished finish on the inside.  Each tank includes a dry airlock – a style of airlock that has a marble inside to make a seal. We recommend replacing this airlock with a classic water airlock to reduce potential oxidation. Includes 3/4" chrome plated spigot. Includes: 304 Stainless Tank 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dry Airlock for tank Chrome Plated Spigot 400L Specifications: Nominal volume: 400 Liters (105.7 gallons) Effective volume: 405 Liters (107.0 gallons) Diameter: 65 cm (26 inches) Height: 130 cm (51 inches) Valve size: 3/4" BSP Thickness (Bottom X side, in mm): 1.0 X 0.7 *Please Note: Tank may differ slightly from image shown. Stands are sold separately.  

Read more less

Variable capacity tank well-suited for fermentation, short-term wine storage, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Tank & lid are made from 304 stainless steel with a food-grade, clear plastic gasket for the lid Air pump with pressure gauge, dry airlock, and spigot are included Made in Italy by Marchisio Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.  Considerations for Winemaking When used in winemaking we recommend these tanks for fermentation and short-term storage. If you are considering storing wine in a variable volume tank for longer than a month, we suggest you consider our German-made Speidel Variable Volume Tanks. In addition to other quality features like a mirror polish inside, thicker stainless, and robotically welded seams, Speidel tanks feature a proprietary lid gasket that only fits their tanks.  This gasket is made from a very high quality, thick, white, food-grade, material that makes a true seal and resists oxygen transfer. This gasket also does not have the seam line that clear gaskets have. To learn more about the clear gaskets watch our video listed below the product copy.  All variable volume tanks other than those from Speidel, including these tanks from Marchisio, feature a standard clear gasket that is sufficient for many applications, but we do not recommend them for long term wine storage.  Marchisio We have been buying tanks from Marchisio since the 1990’s, so we have a long history of collaboration.  Marchisio is a classic Italian tank manufacturer that represents the best value in the industry. Great quality at a very competitive price. All tanks have a classic marbled finish on the outside and a smooth polished finish on the inside.  Each tank includes a dry airlock – a style of airlock that has a marble inside to make a seal. We recommend replacing this airlock with a classic water airlock to reduce potential oxidation. Includes 3/4" chrome plated valve.  Includes: 304 Stainless Tank 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dry Airlock for tank Chrome Plated Spigot 200L Specifications: Nominal volume: 200 Liters (52.8 gallons) Effective volume: 189 Liters (49.9 gallons) Diameter: 65 cm (25.6 inches) Height: 65 cm (25.6 inches) Valve size: 3/4" BSP Thickness (Bottom X side, in mm): 1.0 X 0.7 *Please Note: Tank may differ slightly from image shown. Stands are sold separately.  

Read more less

Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Made from 304 stainless steel with ultra-high-quality laser welds 2R rated interior finish resists residue build-up and is easy to clean Air pump with pressure gauge, airlock, and ball valve included Made in Germany by Speidel We are proud to offer our small Variable Volume Tanks from Speidel - a German manufacturer of premium quality stainless steel tanks for the wine industry. The tank body is fabricated from 304-type stainless steel, while the floating lid is made from 316-type stainless and has an inflatable bladder that pumps up to seal the wine off at any volume level. They can be used for primary fermentation as well as aging. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. These tanks arrive to you complete and ready to go out of the box after a little assembly. The tanks are fitted with 1/2 inch threaded ports to accomodate the included 1/2 inch stainless steel ball valve and 1/2 inch stainless plug. The plugged port is intended for use with an optional thermometer (MT514). Also compatible with shielded thermowell for digital temperature controller probes (FE622). Speidel Quality Features: Rubber Lid Gaskets: Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Warranty - Speidel-Behaelter, GmbH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Dimensions - 550mm D x 999mm H (21.6" D x 39.3" H) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.  

Read more less

Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Conical-shaped complete drainage bottom for maximum product yield and easy cleaning Made from 304 stainless steel with ultra-high-quality laser welds Made in Germany by Speidel We are is proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Note: These stock tanks are outfitted with two male threaded fittings which will accept either a Speidel Sample Valve or a Thermowell. One fitting will come capped and the other will come equipped with a thermometer. Speidel Quality Features: Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems!   Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms.   Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume.   Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms.   Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted for use with 1.5in TC. Other sizes and custom configurations are available at additional cost upon request. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings.   Rubber Lid Gaskets - Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines!   Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Dimensions - 630mm D x 1384mm H (24.8" D x 54.48" H)  (Lip Ø is 26.378" ) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery or avid home winemaker. Features six filling heads and stainless steel construction. Included 4" casters make this unit very easy to move around. Fill up to 100 cases of 750ml bottles per hour.  If you do not have the human power to keep up you can use 4 heads at a time so there is no disadvantage to getting a 6 head filler versus a 4 head filler. We only offer the 6 head filler in this model because the price is very similar between 4 and 6. Compared to units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger, which speeds filling. The fill head is also easier to adjust for for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located at the front of the reservoir Included 4" casters with brake 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gas removal from the bottle for a faster fill rate 980L per hour fill rate 55L reservoir Can fill bottles up to 22" tall 180 pounds 71" H x 34" W x 26" D

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. High-quality stainless steel fermentation and storage tank Laser-welded double jacket for cooling and fermentation temperature control Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress Impeccable 2R (IIId) surface finish for easy cleaning A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid Made in Germany by Speidel This new universal cask with cooling jacket from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids.  These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary.  These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life. Features: Laser-welded double jacket for cooling with G1" male thread (1" BSPP) 304 SS construction IIId surface finish - easy cleanup 60 l (15.9 gal) volume Gasketed sealed tanks - no oxygen permeation during storage 69.2 cm (27.2") Height x 35 cm (13.8") Ø German quality construction with 25 year warranty Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting  

Read more less

Premium quality laser-welded 304 stainless steel closed tank  Made in Germany by Speidel and backed by a 25-year warranty Ideal for spirits and fermented beverages like wine, beer, cider, and kombucha. Ultra-smooth 2R interior finish allows for easy cleaning with cold water Outfitted with a 6-bar max cooling jacket for efficient glycol cooling 1.5” tri-clamp ports with two additional DIN ports for included thermometer/thermowell combo and sample valve The top lid provides a convenient opening for additions and the legs provide easy access to the bottom ports Vaulted complete drainage bottom for maximum product yield and easy cleaning We are proud to present these FD storage tanks made of premium quality 304 stainless steel. Built in Germany by Speidel and sold exclusively in the USA by MoreWine! Pro for over 20 years, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality, and price, these tanks represent the very best value available in stainless steel beer storage. Safely store small volumes of product in these beautiful tanks. The legs make accessing the ports easy and the convenient top hatch makes cleaning a dream when combined with the 2R interior finish. Heavy-duty sealing mechanism and gasket form a seal on top with a stainless steel lid equipped with a T.C. port for adding accessories or an airlock. The inside is finished to Speidel quality standards with flawless welds and a 2R finish. The tanks will support a few PSI of pressure, however, they are not pressure-rated or designed to be used under pressure. Tank Ports Tanks feature 1.5" T.C. outlets (1 on bottom for complete drainage, one in middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. One DIN port is equipped with an included sample valve and the other has an included thermometer and thermowell combination.  The cooling jackets have two 1” NPT ports. Speidel Quality Features Full Jacket - These tanks are equipped with a max cooling jacket rated to 6-bar. This will allow you to hook it into a glycol system for complete temperature control. Interior Finish - Speidel tanks feature an ultra-smooth 2R interior surface which allows you to clean your tanks with cold water, without scrubbing. This saves significant labor costs. Weld Quality - Speidel's robotic-arm laser welders create flawless stainless-to-stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual products to harbor spoilage organisms. Warranty - Speidel and MoreWine! Pro back up each and every tank with an industry-leading 25-year warranty against defects in materials or workmanship. Thickness - Speidel tanks are on average around 25% thicker than Italian-manufactured tanks of the same general capacity and dimensions. Complete Drainage Bottoms - These tanks are outfitted with vaulted bottoms for total drainage, which maximizes product yield at racking and makes cleaning a snap. Tank Features: Full Volume of 525 L (138 gal) 1.5" T.C. Drain, Racking Port, and Lid outlet 8.5" Top hatch for easy cleaning and additions 2 X DIN10 Fittings w/ Sample Valve and Thermowell/ Thermometer combo Tank Dimensions: 820mm D x 1466mm H (32.25" D x 57.7" H)

Read more less

Variable capacity tank well-suited for fermentation, short-term wine storage, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Tank & lid are made from 304 stainless steel with a food-grade, clear plastic gasket for the lid Air pump with pressure gauge, dry airlock, and spigot are included Made in Italy by Marchisio Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.  Considerations for Winemaking When used in winemaking we recommend these tanks for fermentation and short-term storage. If you are considering storing wine in a variable volume tank for longer than a month, we suggest you consider our German-made Speidel Variable Volume Tanks. In addition to other quality features like a mirror polish inside, thicker stainless, and robotically welded seams, Speidel tanks feature a proprietary lid gasket that only fits their tanks.  This gasket is made from a very high quality, thick, white, food-grade, material that makes a true seal and resists oxygen transfer. This gasket also does not have the seam line that clear gaskets have. To learn more about the clear gaskets watch our video listed below the product copy.  All variable volume tanks other than those from Speidel, including these tanks from Marchisio, feature a standard clear gasket that is sufficient for many applications, but we do not recommend them for long term wine storage.  Marchisio We have been buying tanks from Marchisio since the 1990’s, so we have a long history of collaboration.  Marchisio is a classic Italian tank manufacturer that represents the best value in the industry. Great quality at a very competitive price. All tanks have a classic marbled finish on the outside and a smooth polished finish on the inside.  Each tank includes a dry airlock – a style of airlock that has a marble inside to make a seal. We recommend replacing this airlock with a classic water airlock to reduce potential oxidation. Includes 1/2" chrome plated spigot. Includes: 304 Stainless Tank 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dry Airlock for tank Chrome Plated Spigot 100L Specifications: Nominal volume: 100 Liters (26.4 gallons) Effective volume: 93 Liters (24.6 gallons) Diameter: 50 cm (20 inches) Height: 60 cm (24 inches) Valve size: 1/2" BSP Thickness (Bottom X side, in mm): 1.0 X 0.7 *Please Note: Tank may differ slightly from image shown. Stands are sold separately.  

Read more less

Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Made from 304 stainless steel with ultra-high-quality laser welds 2R rated interior finish resists residue build-up and is easy to clean Air pump with pressure gauge, airlock, and ball valve included Made in Germany by Speidel We are is proud to offer our small Variable Volume Tanks from Speidel - a German manufacturer of premium quality stainless steel tanks for the wine industry. The tank body is fabricated from 304-type stainless steel, while the floating lid is made from 316-type stainless and has an inflatable bladder that pumps up to seal the wine off at any volume level. They can be used for primary fermentation as well as aging. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. These tanks arrive to you complete and ready to go out of the box after a little assembly. The tanks are fitted with 1/2 inch threaded ports to accomodate the included 1/2 inch stainless steel ball valve and 1/2 inch stainless plug. The plugged port is intended for use with an optional thermometer (MT512). Speidel Quality Features: Rubber Lid Gaskets - Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Warranty - Speidel-Behaelter, GmbH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Dimensions - 630mm D x 999mm H (24.8" D x 39.3" H) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.

Read more less

High-quality stainless steel fermentation and storage tank Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress Impeccable 2R (IIId) surface finish for easy cleaning A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid Made in Germany by Speidel This new universal cask from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids.  These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary.  These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life. Features: 304 SS construction IIId surface finish - easy cleanup 30 l (7.9 gal) volume Gasketed sealed tanks - no oxygen permeation during storage 40 cm (15.8") Height x 35 cm (13.8") Ø German quality construction with 25 year warranty Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting  

Read more less

High-quality stainless steel fermentation and storage tank Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress Impeccable 2R (IIId) surface finish for easy cleaning A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid Made in Germany by Speidel This new universal cask from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids.  These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary.  These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life. Features: 304 SS construction IIId surface finish - easy cleanup 15 l (3.9 gal) volume Gasketed sealed tanks - no oxygen permeation during storage 35.2 cm (13.9") Height x 28 cm (11") Ø German quality construction with 25 year warranty Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting  

Read more less

Premium quality laser-welded 304 stainless steel closed tank  Made in Germany by Speidel and backed by a 25-year warranty Ideal for spirits and fermented beverages like wine, beer, cider, and kombucha. Ultra-smooth 2R interior finish allows for easy cleaning with cold water Outfitted with a 6-bar max cooling jacket for efficient glycol cooling 1.5” tri-clamp ports with two additional DIN ports for included thermometer/thermowell combo and sample valve The top lid provides a convenient opening for additions and the legs provide easy access to the bottom ports Vaulted complete drainage bottom for maximum product yield and easy cleaning We are proud to present these FD storage tanks made of premium quality 304 stainless steel. Built in Germany by Speidel and sold exclusively in the USA by MoreWine! Pro for over 20 years, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality, and price, these tanks represent the very best value available in stainless steel beer storage. Safely store small volumes of product in these beautiful tanks. The legs make accessing the ports easy and the convenient top hatch makes cleaning a dream when combined with the 2R interior finish. Heavy-duty sealing mechanism and gasket form a seal on top with a stainless steel lid equipped with a T.C. port for adding accessories or an airlock. The inside is finished to Speidel quality standards with flawless welds and a 2R finish. The tanks will support a few PSI of pressure, however, they are not pressure-rated or designed to be used under pressure. Tank Ports Tanks feature 1.5" T.C. outlets (1 on bottom for complete drainage, one in middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. One DIN port is equipped with an included sample valve and the other has an included thermometer and thermowell combination.  The cooling jackets have two 1” NPT ports. Speidel Quality Features Full Jacket - These tanks are equipped with a max cooling jacket rated to 6-bar. This will allow you to hook it into a glycol system for complete temperature control. Interior Finish - Speidel tanks feature an ultra-smooth 2R interior surface which allows you to clean your tanks with cold water, without scrubbing. This saves significant labor costs. Weld Quality - Speidel's robotic-arm laser welders create flawless stainless-to-stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual products to harbor spoilage organisms. Warranty - Speidel and MoreWine! Pro back up each and every tank with an industry-leading 25-year warranty against defects in materials or workmanship. Thickness - Speidel tanks are on average around 25% thicker than Italian-manufactured tanks of the same general capacity and dimensions. Complete Drainage Bottoms - These tanks are outfitted with vaulted bottoms for total drainage, which maximizes product yield at racking and makes cleaning a snap. Tank Features: Full Volume of 625 L (165 gal) 1.5" T.C. Drain, Racking Port, and Lid outlet 8.5" Top hatch for easy cleaning and additions 2 X DIN10 Fittings w/ Sample Valve and Thermowell/Thermometer combo Tank Dimensions: 820mm D x 1661mm H (32.25" D x 60" H)

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Made from 304 stainless steel with ultra-high-quality laser welds 2R rated interior finish resists residue build-up and is easy to clean Air pump with pressure gauge and airlock included Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. The tank features a 1.5" tri-clamp bottom port and NW10 upper port with analog thermometer. The upper side port is NW10 male threaded and will accept either a Speidel Sample Valve or Thermowell. This NW10 fitting comes with a stainless steel cap. Either the Sample Valve or the Thermometer can be added at the time of ordering or ordered separately at any point in the future. Please note: The bottom T.C. port does not come capped. You will also need an end cap, clamp, and gasket if you do not plan to install a valve on the bottom port. Speidel Quality Features: Rubber Lid Gaskets - Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Warranty - Speidel-Behaelter, GmbH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Dimensions - 820mm D x 1328mm H (32.2" D x 52.2" H) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.  

Read more less

Variable capacity tank well-suited for fermentation, short-term wine storage, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Tank & lid are made from 304 stainless steel with a food-grade, clear plastic gasket for the lid Air pump with pressure gauge, dry airlock, and 1.5" tri-clamp port with butterfly valve Features cooling jacket, thermometer & thermowell, 1.5" tri-clamp port Made in Italy by Marchisio Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.  Considerations for Winemaking When used in winemaking we recommend these tanks for fermentation and short-term storage. If you are considering storing wine in a variable volume tank for longer than a month, we suggest you consider our German-made Speidel Variable Volume Tanks. In addition to other quality features like a mirror polish inside, thicker stainless, and robotically welded seams, Speidel tanks feature a proprietary lid gasket that only fits their tanks.  This gasket is made from a very high quality, thick, white, food-grade, material that makes a true seal and resists oxygen transfer. This gasket also does not have the seam line that clear gaskets have. To learn more about the clear gaskets watch our video listed below the product copy.  All variable volume tanks other than those from Speidel, including these tanks from Marchisio, feature a standard clear gasket that is sufficient for many applications, but we do not recommend them for long term wine storage.  Marchisio We have been buying tanks from Marchisio since the 1990’s, so we have a long history of collaboration.  Marchisio is a classic Italian tank manufacturer that represents the best value in the industry. Great quality at a very competitive price. All tanks have a classic marbled finish on the outside and a smooth polished finish on the inside.  Each tank includes a dry airlock – a style of airlock that has a marble inside to make a seal. We recommend replacing this airlock with a classic water airlock to reduce potential oxidation. Includes: 304 Stainless Tank w/ Cooling Jacket 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dial Thermometer & Thermowell 1.5" Tri-Clamp port w/ butterfly valve Dry Airlock for tank 500L Specifications: Nominal volume: 500 Liters (132.0 gallons) Effective volume: 514 Liters (135.7 gallons) Diameter: 79 cm (31.1 inches) Height: 100 cm (39.3 inches) Port size: 1.5" T.C. *Please Note: Tank may differ slightly from image shown. Stands are sold separately.

Read more less