CO2 tanks & regulators are essential pieces of equipment for kegging and dispensing your homebrew. Using a CO2 regulator to carbonate your beer exactly to the preferred carbonation level is an easy way to improve your homebrew. CO2 can be used to not only force carbonate but also push your beer from the fermenter into the keg, as well purge the keg of oxygen before filling it. We offer multiple sizes of CO2 tanks, as well as many different CO2 regulators, manifolds and CO2 splitters.
Get instant pressure reads with the back illuminated Digital Mini Pressure Gauge from KegLand. Swap out the analog pressure gauge on your Core 360 Mini CO2 Regulator, BlowTie 2 Spunding Valve, or Duotight In-Line Regulator. With a 0-90 psi pressure range, the Digital Mini Gauge is suitable for a wide range of applications.
KegLand has developed the world's most compact mini digital gauge with backlight illumination. This very compact design retains high accuracy while still meeting the desirable small form factor. This meets the growing need as mini keg systems, mini regulators and other more compact keg dispensing solutions are required.
Traditional analog gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle. This age-old technique works quite well especially in large gauges but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue. With very small gauges such as a 27mm x 27mm Mini Gauge, it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components.
Compatible With:
BlowTie 2 Spunding Valve
Duotight In-Line Regulator w/ Gauge
Core 360 Mini CO2 Regulator
Specifications:
Backlight Illumination: Hold yellow button for 3-5 seconds
Battery Life: More than 2 years (using the mini gauge once a day)
Battery Type: CR2032
Auto Battery Saver: automatically turns off after 15 sec
Size: 27mm x 27mm (1" x 1")
Radial O-ring Stem: 7.8mm Bore
KegLand Part Number: KL18388
Please note: This gauge is not suitable for measuring pressure of liquids. It is only for measuring gas pressure. If liquid gets into the pressure transducer it will damage the gauge.
For analog pressure gauges that are compatible with liquid, see below:
Mini Gauge 0-15psi
Mini Gauge 0-30psi
Mini Gauge 0-60psi
Mini Gauge 0-150psi
KegLand Part Number: KL18388
These quick disconnects feature 1/4" barbed fittings which can be used with either 3/16", 1/4" or 5/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you need not worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade buna-n.
For the female side, see our H550B.
Savvy homebrewers love quick disconnects on their gas lines! They give you the ability to quickly move hoses from one configuration to another with ease!
These quick disconnects feature 1/4" barbed fittings which can be used with 3/16", 1/4" or 5/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you don’t need to worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade Buna-N.
In short, these QDs are durable, user friendly and versatile. A no-brainer!
For the male side, see our H550A, or buy both sides together as a set.
Get instant pressure reads with the back illuminated Digital Mini Pressure Gauge from KegLand. Compatible with 8 mm Duotight fittings and Gray Ball Lock QDs. If you're using the original BlowTie spunding valve without pressure gauge, you can use a Duotight tee fitting in-line between the ball lock QD and the BlowTie to take pressure readings with the Digital Mini Gauge.
KegLand has developed the world's most compact mini digital gauge with backlight illumination. This very compact design retains high accuracy while still meeting the desirable small form factor. This meets the growing need as mini keg systems, mini regulators and other more compact keg dispensing solutions are required.
Traditional analogue gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle. This age-old technique works quite well especially in large gauges but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue. With very small gauges such as a 27mm x 27mm Mini Gauge, it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components.
Specifications:
Battery Life: More than 2 years (using the mini gauge once a day)
Battery Type: CR2032
Auto Battery Saver: automatically turns off after 15 sec
Size: 27mm x 27mm (1" x 1")
Duotight Stem: 8 mm
KegLand Part Number: KL18081
Please note: This gauge is not suitable for measuring pressure of liquids. It is only for measuring gas pressure. If liquid gets into the pressure transducer it will damage the gauge.
Savvy homebrewers love quick disconnects on their gas lines! They give you the ability to quickly move hoses from one configuration to another with ease!
These quick disconnects feature 3/8" barbed fittings which can be used with 5/16", 3/8" or 7/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you don’t need to worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade Buna-N.
In short, these QDs are durable, user friendly and versatile. A no-brainer!
This is a direct replacement to the Female Quick Disconnect with 3/8" Barbs that is featured on the BrewBuilt CoolStix™.
This 1.5 in TriClamp pressure and vacuum relief valve is a great way to protect your tank. It will relieve pressure over 1.5 BAR but will also let in air if the tank is a vacuum inside to prevent the tank from imploding.
Features:
Relief pressure: 1.5 BAR (22 psi)
Allows pressure in during a vacuum
1.5 in TC
Kegland Part Number: KL01823
Plastic quick disconnect with 3/8" barb which can be used with either 1/4", 5/16" or 3/8" line. The quick disconnect functionality is activated by a shrouded thumb latch on the female QD. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you need not worry about them leaking gas. The o-ring is food grade buna-n.
This is a non-valved QD. It does not have an internal shut-off like H550A.
For the female side, see our H550B.
The Taprite beer carbonation tester is designed to be used in the field to verify carbonation levels during equipment installation and keg change-outs. It is a cost effective and accurate tool for troubleshooting and quality control. The carbonation tester's sturdy, 11-ounce acrylic canister includes a handy label noting the appropriate CO2 volume based on your temperature and pressure reading. The tester's cap and fittings are made of lightweight metal with easy to grip knurling. The pressure gauge includes a protective rubber boot (600gps-01) for additional durability. Taprite's beer carbonation tester is easy to handle, easy to use, and easy to clean. Each tester comes with a cushioned carrying case, as well as inlet and outlet hoses with quick disconnects.
Taprite Part Number: 2701-bct
Use this quick disconnect set to seal a soda bottle under CO2 pressure. An ideal way to bring homebrew to a party without all the accessories.
TIP N' TRICK: Add a CO2 tee inline with your current CO2 setup and install the H481 Kent Shut-Off Female QD w/ 1/4 in Barb included. This way you always have access to CO2 accessible to put your beer under pressure before leaving for the party.
* A single-handed connection and disconnection
* Strong plastic that can handle 250 degrees, very durable, and is medical-grade compliant and made from FDA approved material
* Easy installation into your home brewery
* KENT Systems quarter turn design functions safely
This replacement spring is intended for use with our adjustable stainless steeel pressure relief valve - D1832L & D1833L. These units are adjustable from 0 to 30 psi.
Example photo shown. The spring you receive may not match the photo exactly.
Use this cap to seal a soda bottle under CO2 pressure. An ideal way to bring homebrew to a party without all the accessories.
TIP N' TRICK: Add a CO2 tee inline with your current CO2 setup and install our H481 Kent Shut-Off Female QD w/ 1/4 in Barb. This way you always have access to CO2 accessible to put your beer under pressure before leaving for the party.
* A single-handed connection and disconnection
* Strong plastic that can handle 250 degrees, very durable, and is medical-grade compliant and made from FDA approved material
* Easy installation into your home brewery
* KENT Systems quarter turn design functions safely regardless of pressure up to 125 p.s.i.
Use this quick disconnect to seal a soda bottle under CO2 pressure using our H470-Kent Shut-Off Male QD - Soda Bottle Cap. An ideal way to bring homebrew to a party without all the accessories.
TIP N' TRICK: Add a CO2 tee inline with your current CO2 setup and install this H481 Kent Shut-Off Female QD w/ 1/4 in Barb. This way you always have access to CO2 accessible to put your beer under pressure before leaving for the party.
* A single-handed connection and disconnection
* Strong plastic that can handle 250 degrees, very durable, and is medical-grade compliant and made from FDA approved material
* Easy installation into your home brewery
* KENT Systems quarter turn design functions safely regardless of pressure up to 125 p.s.i.
Easily set and view different pressures downstream from a single CO2 regulator. Serve different beverages at different pressures without the need for expensive regulator manifolds!
Built-in pressure gauge for easy reference when adjusting pressure settings
Pressure gauge is interchangeable—swap to different pressure ranges that better suit your application
Compatible with both liquid and gas
8 mm Duotight inlet/outlet for use with 8 mm OD EVABarrier tubing or 8 mm Rigid Joiners
The Duotight In-Line Regulator is an ideal solution if you want to serve different beers at different gas pressures. In a typical multiple line, multiple pressure system you would run a gas line from your main regulator into a secondary regulator where you would set different pressures. While that is ideal, it is a little pricey. This little sweetheart lets you set different pressures at a far lower cost. What we do is set the main regulator at the highest pressure we want in the system - for example a keg of soda that you want to carbonate and serve at 25 psi. Run the gas line into a manifold and then install one of these after the manifold on each line where you want to decrease the pressure, for example lowering to 10psi to serve your British pale ale and 14 psi to serve your summertime lawnmower lager.
Works with both gas and liquid. Easily adjust the flow can be adjusted with the yellow adjustment knob. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing (D1717 or D1718). Features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge.
Stepping Down Pressure
The ideal regulation scenario occurs when the inline regulator steps down the output pressure to at least 10 PSI less than the inlet pressure. For example, if the inlet pressure is 30 PSI, the regulator effectively manages a range from 0–20 PSI on the output side ensuring optimal performance and stability.
Ideal regulation scenario (10 PSI less than inlet pressure)
Example of 30 PSI inlet translating to 0–20 PSI output
Specifications:
Made from food grade acetal
Stainless screws
Easily disassembles for cleaning
8mm (5/16") Duotight fittings at both ends
Interchangeable pressure gauge
Gauge reads from 0-60 psi
Made with quality EPDM seals
Wall mountable
WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge.
Kegland Part number: KL15035
Keep multiple kegs under pressure at once!
Predrilled holes for easy mounting
EVABarrier Draft Tubing fits perfectly on the 1/4 in flares
Gas manifolds are the best way to provide CO2 to multiple kegs inside your kegerator or keezer. The KOMOS manifold features 1/4" flare gas inlet and check valves that provide much more flexibility compared to manifolds with barbed valves. Choose the type and size of draft tubing that you prefer. Use 1/4" or 5/16" gas line with the appropriate Flare Fitting Set (KEG607 or KEG640), or use EVABarrier—our draft line of choice—with the appropriately sized Duotight Fitting (DUO106 or DUO120).
You can also replace one or more of the check valves with a Ball Lock Post Bulkhead, which allows you to use a gas-in ball lock jumper line as a quick connect option.
Need something bigger than a 4-way manifold? No problem! With this 1/4" Nipple, you can join multiple manifolds for as many outlets as you need.
Features:
1/4" Flare connections
1/4" BSP ball valves
Rated to 100 psi
Wall mount holes
Made from aluminum, brass, and stainless steel
Size
Overall Length
2-way
5.25"
3-way
7.25"
4-way
9.25"
The above measurements are from the tip for the brass flare inlet to the plug on the opposite end. Each manifold measures approximately 3.5" from the mounting holes to the tip of the valve.
Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
Unique Core Puncturing / Actuator results in zero gas lost from screwing in CO2 cartridges
Interchangeable ball lock disconnect orientations. 45° for plastic QDs or 90° for stainless QDs
6.5mm Duotight compatible hose barb
Swappable mini pressure gauge remains well protected within solid cast brass regulator body
Corny-style 65psi Green PRV for added safety and manual depressurizing
Switch from 16g to 74g CO2 cartridges with an adapter fitting
The new Core 360 Mini CO2 Regulator from KegLand represents a huge jump forward in the mini regulator market. After much feedback on how to make mini regulators more compact, sturdy and efficient, the brilliant engineers at KegLand have come up with this mini-beast.
The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge.
Heavy Duty Construction
Starting with the body of the regulator, this unit is made from chrome-plated solid cast brass which means it will stand up to quite a bit of abuse. Unlike most mini regulators, the pressure gauge on the Core 360 is safely recessed in the regulator body, so if you ever drop it there is little chance that you'll damage the gauge. What's more, the gauge is removable, so you can swap it out with another mini gauge with a pressure range that better suits your application.
Unique Cartridge Connection
What really sets this unit apart from other mini regulators is the way in which you insert a CO2 cartridge. A common complaint with these types of regulators is that you can lose a lot of gas from the cartridge just from threading it into the regulator. There's that brief period where the cartridge has been punctured but you haven't fully threaded it into the regulator to form a seal. If you're not quick enough, this can result in a significant amount of lost gas. The Core 360 has a unique design feature where inserting the cartridge is a 2-step process. First you fully thread in the cartridge so it forms a seal before it's opened, and then you screw down the actuator pin to release gas into the regulator. Simple and effective.
Furthermore, the Core 360 Mini Regulator is designed to be compatible with both 16g and 74g cartridges. Out of the box it will be ready to accept 16-gram 3/8"-24 UNF threaded cartridges. But with a simple adapter you can switch to 74-gram 5/8"-18 UNF threaded cartridges.
Interchangeable Gas Outlet
Another feature we haven't seen before on a mini regulator is the interchangeable gas outlet. You can use the swivel nut connection to directly attach the regulator to a flare ball lock disconnect, or you can swap to the 6.5mm Duotight-compatible barb and connect draft tubing. This is a great option if you want to dispense a commercial keg without the need of a ball lock to sanke coupler adapter.
The regulator also has two outlet options at either a 45° or 90° angle which makes this the ideal mini regulator regardless of whether you use plastic or stainless steel ball lock disconnects.
SodaStream Compatible
If you remove the 16g cartridge bushing, you'll find TR21-4 female threads for use with SodaStream gas cylinders. These can be a great option for mobile dispensing as they provide much more gas than a CO2 cartridge and are more easily transported than a full CO2 tank.
Includes:
KegLand Core 360 Mini Regulator
6.5mm Duotight-compatible hose barb
Female Flare Fitting for MFL Disconnects
Port end cap
65psi Green PRV
SodaStream to 16g thread bushing
KegLand Part Number: KL20404
Warning: Do not overtighten onto your cylinder. It is recommended that you use a spanner to hold the neck of your SodaStream cylinder while attaching and detaching the Mini 360 Core Actuator Regulator.
Leave your bulky CO2 regulator and cylinder at home!
This Mini CO2 regulator uses 74g cartridges for convenient mobile draft dispensing
Dial in your ideal serving pressure just as you would with your standard regulator
A portable mini-regulator with all the features of a full sized regulator! Perfect for parties and gatherings where you don’t want to haul around a large canister and hoses. A lot of great features packed into a very small package.
The regulator has a range of .5-1.5 bars (7-21 psi). This means that, unlike a button-activated CO2 injector that shoots in CO2 at a fixed pressure, the mini-reg allows you precisely dial in pressure and keep it there. It utilizes a disposable 74 gram CO2 cartridge, which is the largest size that can be shipped full. This is a two stage mini-regulator, meaning that it takes the pressure down from 800 psi (cartridge pressure) to a lower pressure and then to your set pressure of around 10 psi. Two stage regulators are the only way to have consistent pressure. One 74 gram cartridge will typically dispense one 5 gallon keg.
This is the regulator only. Cartridges and quick disconnect (KEG730) sold separately.
Please Note:
This product is only eligible for ground shipment in the Contiguous United States. No air shipment or shipment to Hawaii or Alaska.
The mini CO2 regulator does not have an internal check valve. To add a check valve use the regulator with KEG729 or KEG741.
Easily carbonate or dispense beverages at different pressures with the KOMOS Dual Body CO2 Regulator
Wide 0-60 PSI operating range suitable for both dispensing and rapid burst carbonation
Ideal for seltzers and high-carbonation drinks requiring 30-40 PSI
Includes Duotight adapters for EVABarrier tubing and 1/4" flare fittings with barbs, allowing for quick and adaptable gas line setups
Heavy-duty steel gauges with rubber bumpers, robust body, and precision diaphragm ensure long-lasting, accurate pressure adjustments
Compatible with standard US CO2 tanks and can be adapted for use with Nitrogen / Argon tanks
This beefy, industrial-grade regulator will serve you well for years to come. The robust dual-body and precision diaphragms provide high flow rates, and the pressures can be easily and precisely adjusted with the hand dials. Extra thick stainless gauges come with rubber bumpers for added protection. The dial faces are triple-scaled to read in psi, bar and kPa.
The PRVs are rated to 65 psi (4.5 bar) for added safety while in use. Comes with male flare thread outlets with included 1/4" barb and nut. Easily swap out the barbs to a different size if desired. On the back of the regulator body are three M6 screw holes for mounting (screws not included).
It also comes standard with Duotight Adapters, allowing for quick connection of EVABarrier draft tubing for a solid, yet easy to change, way of connecting gas line. Add Duotight Tees to easily split the line to multiple kegs.
The Komos Dual Body Regulator is a beefy, heavy regulator. If you are using with a 5 lb co2 tank you will need to keep your tank in stand or strapped down to keep the tank and regulator from tipping over.
The regulator is CO2 ready with standard US CGA320 threads. It can also be used with Nitrogen or Argon tanks with the optional CGA320 x CGA580 Adapter.
Features:
0–60 PSI operating range
Low pressure gauge reads from 0–100
Pull ring PRV rated to blow off at 65 PSI
Strong, robust design
Highly accurate precision diaphragm
1/4" flare fittings with barbed outlets & Duotight adapters
M6 mounting screw holes
Made in accordance with AS 4267
Serve beer on tap at home! A quality CO2 tank is a core component to any home draft system.
Made from high-quality aluminum that will never rust like steel tanks
Dispense up to 9 x five-gallon kegs of homebrew
CGA320 valve pairs with standard US-style CO2 gas regulators
KOMOS® offers a full suite of first-rate draft products and draft fittings—from kegs to faucets and everything in between!
Standard 5 lb size is ideal for home draft applications—compact enough to fit inside you kegerator and won't need to be refilled too often
Brand new aluminum 5 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 5 lb tank because it holds 5 lbs of compressed (liquified) CO2. 5 lbs of CO2 is enough to dispense about 8 to 9x 5-gallon kegs of homebrew.
Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder.
Tanks should always be stored in an upright position.
Features:
Made from corrosion resistant, engineered Aluminum
Brushed finish
Thick, durable cylinder walls
18" T x 5.25 Ø
DOT approved
New high quality CGA-320 valve
Light weight compared to steel tanks
Serve beer on tap at home! A quality CO2 tank is a core component to any home draft system.
Made from high-quality aluminum that will never rust like steel tanks
Dispense 18 x five-gallon kegs of homebrew
CGA320 valve pairs with standard US-style CO2 gas regulators
KOMOS® offers a full suite of first-rate draft products and draft fittings—from kegs to faucets and everything in between!
Go with the larger 10 lb CO2 tank and extend the time between needing to refill or swap for a full tank
Brand new aluminum 10 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 10 lb tank because it holds 10 lbs of compressed (liquified) CO2. 10 lbs of CO2 is enough to dispense about 20x 5-gallon kegs of homebrew.
Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder.
Tanks should always be stored in an upright position.
Features:
Made from corrosion resistant, engineered Aluminum
Brushed finish
Thick, durable cylinder walls
20.75" T x 6.875 Ø
DOT approved
New high quality CGA-320 valve
Light weight compared to steel tanks
16g threaded CO2 cartridges that work great with the KegLand Core 360 Mini CO2 Regulator or the Duotight Mini CO2 Regulator. Comes in a package of 6 cartridges.
Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.
High performance primary regulator designed to handle the workload of dispensing from multiple taps without freezing up!
Dual high-pressure and low-pressure gauges to easily reference CO2 cylinder pressure and output pressure
Pressure settings are easily adjusted by hand using the large plastic adjustment knob
CGA320 inlet features a built-in gasket where the unit attaches to the CO2 tank—eliminating the need of replacing fiber washers with each tank swap
Made in the USA. Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment
One-way shutoff valve outlet protects your regulator from backflow and can be turned on/off to stop gas flow without needing to close your tank
When it comes to CO2 regulators, we’ve tried them all. This quality unit by Taprite is our favorite on the market. It’s no wonder this regulator is trusted by so many breweries and beer bars—it represents the best quality at a great price. Available in a standard, single-body model, as well as a dual-body model which allows you to send different pressures to two separate kegs from the same CO2 tank!
The things you’ll love about this regulator are:
The large front knob makes pressure adjustment tool-free, easy & fast.
The built-in gasket where the regulator connects to the CO2 tank eliminates the constant replacement of fiber washers every time you change out your tank.
The barbed outlet features a one-way on/off valve which prevents backflow and protects the regulator’s internals.
The gauges are easy to read. The low pressure gauge reads from 0 to 60 psi. The optional available gauge cage is the best on the market.
This is the T742HP model, where the HP stands for high performance; it won't freeze up when multiple taps are running at once.
Best of all is the consistent pressure regulation. With many regulators the pressure can 'creep' up over time. This unit holds the pressure rock steady. No drifting.
Built by Taprite, an American company.
These cartridges give the oomph to your mini-regulator dispensing unit! Perfect for dispensing your beer on the go.
For use with the Torpedo Mini CO2 Regulator (KEG965A). One canister will push between 1-4 Cornelius kegs, depending on how it is used and the CO2 consumption required.
5/8-18 threading.
Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.
Get that eye-catching cascading effect by serving your Stouts & Porters with a nitrogen tank filled with beer gas mix!
Serve still beverages on draft with pure nitrogen or argon—serving still bevs with CO2 will lead to carbonation over time
Dual high-pressure and low-pressure gauges to easily reference cylinder pressure and output pressure
CGA580 inlet compatible with standard US nitrogen and argon tanks
Made in the USA. Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment
One-way shutoff valve outlet protects your regulator from backflow and can be turned on/off to stop gas flow without needing to close your tank
This Taprite Nitrogen Regulator will allow you to add Nitro-Draft capability to your home dispense system!
Use this dual gauge nitrogen regulator to connect a tank of Beer Gas mix (70% Nitorgen/30% CO2) to your keg for an authentic nitro-pour! Traditionally used for stouts and porters, a nitro pour is becoming popular with more and more beer styles, lending its signature creamy mouthfeel and head to the beer. An amazing upgrade to any brewer's draft system.
Made in the USA by Taprite. 5/16" barb.
A portable mini-regulator with all the features of a full sized regulator! Perfect for parties and gatherings where you don’t want to haul around a large canister and hoses. A lot of great features packed into a very small package.
The regulator has a range of .5-1.5 bars (7-21 psi). This means that, unlike KEG950 that shoots in CO2 at fixed pressure, the mini-reg allows you precisely dial in pressure and keep it there. It utilizes a disposable 74 gram CO2 cartridge, which is the largest size that can be shipped full. This is a two stage mini-regulator, meaning that it takes the pressure down from 800psi (cartridge pressure) to a lower pressure and then to your set pressure of around 10psi. Two stage regulators are the only way to have consistent pressure. One 74 gram cartridge will typically dispense one 5 gallon keg.
Comes with regulator, one gas-in quick disconnect and the associated hardware. 74 gram CO2 cartridges (KEG962) are available separately. KEG969 cartridges are not compatible with this regulator.
Due to high demand, this item with shut off valves is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Serve beverages at different pressures without the need for multiple CO2 cylinders, dual body regulators, or expensive gas manifolds
Feed a single pressure to the gas board from your regulator and then step down the pressure on each Duotight regulator
Use one line for serving ales, another for soda or seltzer water, and another for carbonating a freshly filled keg
All parts shown are included and snap together quickly thanks to Duotight push-to-connect fittings and rigid plastic joiners
Duotight In-Line Regulators feature built-in pressure gauges that read 0-60 PSI and can be swapped out for different ranges if desired
The Duotight Draft Regulator Board is a simple and cost-effective solution to serving beer and other beverages on draft at different pressures. With a standard CO2 tank and CO2 regulator, you can feed gas at a single pressure into the regulator board and then fine tune individual pressure settings for each gas line via the Duotight In-Line Regulators. These regulators feature built-in pressure gauges that make adjustments super simple and check valves are included as standard so you never have to worry about back flow into the regulator. This kit includes everything you need to assemble your regulator board and can be customized so the gas inlet is on the right or left side—whichever makes the most sense for your home draft setup. Duotight push-to-connect fittings and the precut rigid joiners make assembly a breeze and only takes 10-15 minutes!
The draft board kit comes in two options—with or without shut off valves. These valves offer peace of mind and allow you to shut off gas flow to any line that is not in use. If you ensure that your system has no leaks, they aren't technically needed, and you can always fully tighten your Duotight Regulator adjustment knob for added protection. But that little extra security might help you sleep easier at night! One advantage of choosing no check valves, however, is that it will leave room at the top of the board to label your gas lines.
One of the coolest features of the Duotight In-Line Regulator is that the included pressure gauge can be swapped out for different pressure ranges. The standard gauge reads 0-60 PSI, but if you have one line that will always be used for serving Ales, you can swap to a 0-15 PSI gauge that will be a little easier to read and make precise adjustments. There's also a Digital Pressure Gauge available that provides backlit instant reads and is rated from 0-90 PSI.
Need more than 4 gas lines? Check out the 6-Way Duotight Draft Regulator Board.
Please Note: Full assembly required. The gas board, regulators, and fittings will arrive loose. Please see our instructions and assembly video below.
Stepping Down Pressure
The ideal regulation scenario occurs when the inline regulator steps down the output pressure to at least 10 PSI less than the inlet pressure. For example, if the inlet pressure is 30 PSI, the regulator effectively manages a range from 0–20 PSI on the output side ensuring optimal performance and stability.
Ideal regulation scenario (10 PSI less than inlet pressure)
Example of 30 PSI inlet translating to 0–20 PSI output
Kit Includes:
4-Output Gas Board
(4) Duotight In-Line Regulators
(4) Duotight Check Valves
(4) Duotight Shut Off Valves (if selected above)
(3) Duotight Tees
(1) Duotight Elbow
(15) Rigid Plastic Joiners
NOTE: All Duotight fittings and rigid plastic joiners come as 8mm OD. Mounting hardware is included for the regulators but not for mounting the board itself to a wall or the inside of your kegerator/keezer. If you select the option without shutoff valves, you will be left with some spare joiners after assembly.
Due to high demand, the six way is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Serve beverages at different pressures without the need for multiple CO2 cylinders, dual body regulators, or expensive gas manifolds
Feed a single pressure to the gas board from your regulator and then step down the pressure on each Duotight regulator
Use one line for serving ales, another for soda or seltzer water, and another for carbonating a freshly filled keg
All parts shown are included and snap together quickly thanks to Duotight push-to-connect fittings and rigid plastic joiners
Duotight In-Line Regulators feature built-in pressure gauges that read 0-60 PSI and can be swapped out for different ranges if desired
The Duotight Draft Regulator Board is a simple and cost-effective solution to serving beer and other beverages on draft at different pressures. With a standard CO2 tank and CO2 regulator, you can feed gas at a single pressure into the regulator board and then fine tune individual pressure settings for each gas line via the Duotight In-Line Regulators. These regulators feature built-in pressure gauges that make adjustments super simple and check valves are included as standard so you never have to worry about back flow into the regulator. This kit includes everything you need to assemble your regulator board and can be customized so the gas inlet is on the right or left side—whichever makes the most sense for your home draft setup. Duotight push-to-connect fittings and the precut rigid joiners make assembly a breeze and only takes 10-15 minutes!
The draft board kit comes in two options—with or without shut off valves. These valves offer peace of mind and allow you to shut off gas flow to any line that is not in use. If you ensure that your system has no leaks, they aren't technically needed, and you can always fully tighten your Duotight Regulator adjustment knob for added protection. But that little extra security might help you sleep easier at night! One advantage of choosing no check valves, however, is that it will leave room at the top of the board to label your gas lines.
One of the coolest features of the Duotight In-Line Regulator is that the included pressure gauge can be swapped out for different pressure ranges. The standard gauge reads 0-60 PSI, but if you have one line that will always be used for serving Ales, you can swap to a 0-15 PSI gauge that will be a little easier to read and make precise adjustments. There's also a Digital Pressure Gauge available that provides backlit instant reads and is rated from 0-90 PSI.
Don't need 6 gas lines? Check out the 4-Way Duotight Draft Regulator Board.
Please Note: Full assembly required. The gas board, regulators, and fittings will arrive loose. Please see our instructions and assembly video below.
Stepping Down Pressure
The ideal regulation scenario occurs when the inline regulator steps down the output pressure to at least 10 PSI less than the inlet pressure. For example, if the inlet pressure is 30 PSI, the regulator effectively manages a range from 0–20 PSI on the output side ensuring optimal performance and stability.
Ideal regulation scenario (10 PSI less than inlet pressure)
Example of 30 PSI inlet translating to 0–20 PSI output
Kit Includes:
6-Output Gas Board
(6) Duotight In-Line Regulators
(6) Duotight Check Valves
(6) Duotight Shut Off Valves (if selected above)
(5) Duotight Tees
(1) Duotight Elbow
(23) Rigid Plastic Joiners
NOTE: All Duotight fittings and rigid plastic joiners come as 8mm OD. Mounting hardware is included for the regulators but not for mounting the board itself to a wall or the inside of your kegerator/keezer. If you select the option without shutoff valves, you will be left with some spare joiners after assembly.
This adapter piece enables legacy Torpedo Mini CO2 Regulators (KEG965A) to be compatible with 74g CO2 cartridges that have a small unthreaded gap at the top of the neck—cartridges similar to KEG969.
This piece now comes standard on the updated Torpedo Mini CO2 Regulator and is a direct replacement part for KEG965B.
Perfect for home use with compact keg setups or on the go for mobile dispensing
Compatible with both 16g and 74g CO2 cartridges
Features a 6.35mm Duotight-compatible barb for fast, hassle-free keg attachments
The Duotight Mini CO2 Regulator is a simple, affordable choice for mini kegs and Oxebar keg setups. This compact regulator is designed to work with both 16g and 74g CO2 cartridges, making it ideal for home use or when you're on the go.
With the 6.35mm Duotight-compatible barb you can connect just about anything within a matter of seconds. Simply pair it with the 6.35mm Duotight Ball Lock QD for a quick and hassle-free connection to your kegs. Or, with the Duotight Reducer, you can adapt the regulator for use with the most common and widely used 8mm Duotight accessories.
For additional protection against liquid backflow, you can integrate a check valve along with some hosing to safeguard your regulator. Please note if liquid enters the regulator, it's no longer functional. Be extremely careful with overfilling your kegs or tipping them over when the gas has run out.
The regulator is capped at 30 psi to ensure you do not accidentally over carbonate or exceed your keg's pressure rating. The gauge reads up to 60 psi to account for potential heat expansion so that it does not break the gauge.
Suitable Gas Cartridges:
16g Cartridge 6-pack (KEG993)
74g Cartridge (KEG969)
KegLand Part Number: KL42000
Serve beer on tap at home! A quality CO2 tank is a core component to any home draft system.
Made from high-quality aluminum that will never rust like steel tanks
Dispense up to 50 x five-gallon kegs of homebrew
CGA320 valve pairs with standard US-style CO2 gas regulators
KOMOS® offers a full suite of first-rate draft products and draft fittings—from kegs to faucets and everything in between!
This size is large enough for commerical applications—it should last you a while on your home draft system
Brand new aluminum 25 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 25 lb tank because it holds 25 lbs of compressed (liquified) CO2. 25 lbs of CO2 is enough to dispense about 50x 5-gallon kegs of homebrew.
Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder.
Tanks should always be stored in an upright position.
Features:
Made from corrosion resistant, engineered Aluminum
Brushed finish
Thick, durable cylinder walls
32.5" T x 8 Ø
DOT approved
New high quality CGA-320 valve
Light weight compared to steel tanks
