The KOMOS Double-Wide Kegerator has the largest interior capacity of any home kegerator on the market. With an extra wide design, this unit can hold up to eight 5-gallon Slimline Torpedo Kegs or Pepsi-style Ball Lock Kegs. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 2-3" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26–82°F, dual gas inlets at the back, aluminum internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator. The most eye-catching difference between the KOMOS Double-Wide and other kegerators is definitely the capacity. With an extra wide interior and double tower configuration, this is likely the only home kegerator you'll find that can hold up to eight 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Many kegerators only have one inlet that is only wide enough for a single line to pass through. Both inlets on the back of the KOMOS unit are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the towers to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. KOMOS Regulator The included high quality KOMOS regulator maintains consistent pressure. The regulator includes a blow-off PRV with pull ring for safety and relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip trays couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment, however unlikely since these units require freight shipping. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary:
Digital Thermostat with wide 26 - 82° F temp range. Robust KOMOS Dual Gauge Regulator included CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Countertop Style Drip Trays Aluminum floor for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Specifications: 35.4" wide 27.8" deep 34.3" with CO2 mount 33" Tall (fridge only) 35.5" with Caster wheels 110V - 50 hz 0.9 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 31.6" wide 20.4" deep 17.1" on the left side where the compressor sits 28.3" tall What Fits: 5 Gal. Torpedo Keg - 6 5 Gal. Slimline Torpedo Keg - 8 6 Gal. Torpedo Keg - 6 5 Gal. Megamouth Torpedo Keg - 3 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 6 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 8 5.2 Gal. Oxebar PET Keg - 6 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 6 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 3 15.5 Gal. Half Barrel Keg (Full Size Keg) - 2 See below for the Kegerator Instruction Manual. Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.
What makes KOMOS Double-Wide Kegerator better than the rest?
Designed to hold up to EIGHT 5-gallon Slimline Torpedo homebrew kegs
Serve ice cold beer even in the warmest environments thanks to highly-efficient refrigeration components
Stainless steel forward-sealing faucets offer a huge upgrade over common chrome plated brass taps
Choose from the classic stainless, stainless with black finish or the upgraded stainless flow control model
Faucets mount to high-quality stainless steel towers, rather than cheap chrome plated towers
Interior fan diverts cold air up into the towers to keep your beer lines cold and reduce foaming
EVABarrier double walled draft tubing protects your beer against oxidation
Duotight push-to-connect fittings make assembly a breeze
Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted
Some people say that one kegerator just isn't enough—but those people never met the KOMOS Double-Wide Kegerator. With a stunning 8-keg capacity and double-tower configuration, this beast of a home kegerator can house enough beer to satisfy even the thirstiest brewers.
The KOMOS Double-Wide Kegerator offers the same stunning set of features that clearly separate the standard model as the most modern kegerator on the market. With more interior space than any other home kegerator model, the KOMOS Double-Wide Kegerator is designed to fit up to eight 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. Whether you choose the two tap or eight tap configuration, you'll receive NukaTap stainless steel faucets, the newest in forward-sealing faucet design. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Rather than a chrome plated tower, the NukaTap faucets are mounted to a stainless steel tower that remains cool before, during, and after each pour thanks to a tower fan diverter that recirculates cold air within the kegerator and blows it up into the tower to keep your beer lines cold and reduce foaming. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26–82°F, dual gas inlets at the back, aluminum internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator.
The most eye-catching difference between the KOMOS Double-Wide and other kegerators is definitely the capacity. With an extra wide interior and double tower configuration, this is likely the only home kegerator you'll find that can hold up to eight 5-gallon Slimline Torpedo or Ball Lock Corny kegs.
Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Many kegerators only have one inlet that is only wide enough for a single line to pass through. Both inlets on the back of the KOMOS unit are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines.
Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the towers to chill your draft lines.
Extra Wide Temperature Range is Perfect for Homebrewers
The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice.
Forward-sealing Stainless Faucets and Towers
All KOMOS kegerators come with NukaTap stainless steel forward-sealing faucets and a stainless steel draft tower. While other kegerator brands include basic, chrome-plated faucets and ABS plastic draft towers to reduce cost, KOMOS includes these premium upgrades as standard.
Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Most other kegerators on the market will include the cheapest, rear-sealing chrome-plated beer faucets that you'd find at any dive bar. KOMOS kegerators include not only a faucet that features superior pour technology, but made from stainless steel which won't corrode over years of use.
Choose from the classic forward-sealing faucet model or the upgraded flow control model that allows you to dial in the flow rate of the beverage you're dispensing. The flow control faucet is a great option for users that often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Instantly make adjustments as you pour to dial in the flow rate. This is also a super convenient feature for when you want to grab a quick growler on your way out. By dialing back the flow rate, you can gently fill your growler so CO2 stays in solution and your beer doesn't pour flat when it comes time to share.
Click here to learn more about the Classic, Black, and Flow Control faucet models.
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines. We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
KOMOS Regulator
The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line.
Added Features
One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China.
The countertop drip trays couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Feature Summary:
Stainless Steel Air Cooled Towers
NukaTap Stainless Steel Forward-Sealing Faucets
Choose faucet model and number of taps above
Duotight Fittings make connecting draft lines a breeze
Digital Thermostat with wide 26 - 82° F temp range.
Robust KOMOS Dual Gauge Regulator included
CO2 Tank holder mounts on back of kegerator (tank not included)
Efficient and powerful compressor
Stainless Steel Door
Countertop Style Drip Trays
Aluminum floor for additional keg support
Includes EVABarrier beer and gas tubing
Beverage line measures 4mm ID x 8mm OD
1 x 1.7m length of line per tap
Gas line measures 5mm ID x 8mm OD
1 x line of varying length depending on number of taps (2, 2.5, or 3m)
4 Tap towers includes uncut rolls of bev & gas line
We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.)
Gas lines can be cut to whatever length best suits your needs
Duotight adapters for draft shank and regulator connections
Duotight tee fittings for splitting gas lines (2-tap tower and higher only)
You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny
For ball lock and pin lock disconnects we recommend DUO106
For commercial sanke keg couplers we recommend DUO104
Detailed instructions on assembly and use
Specifications:
35.4" wide
27.8" deep
34.3" with CO2 mount
33" Tall (fridge only)
35.5" with Caster wheels
49.25" with tower
51.5" with Casters and Tower
110V - 50 hz
0.9 Amp draw
Optimal ambient temperature is 65°F – 80°F
CSA Certified
Internal Dimensions:
31.6" wide
20.4" deep
17.1" on the left side where the compressor sits
28.3" tall
What Fits:
5 Gal. Torpedo Keg - 6
5 Gal. Slimline Torpedo Keg - 8
6 Gal. Torpedo Keg - 6
5 Gal. Megamouth Torpedo Keg - 3
5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 6
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 8
5.2 Gal. Oxebar PET Keg - 6
5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 6
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 2
7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 3
15.5 Gal. Half Barrel Keg (Full Size Keg) - 2
See below for the Kegerator Instruction Manual.
When choosing the number of taps you want, here is the tower configurations you'll receive.
Taps
Tower 1
Tower 2
2-Tap
Single
Single
3-Tap
Single
Double
4-Tap
Double
Double
5-Tap
Double
Triple
6-Tap
Triple
Triple
7-Tap
Triple
Quad
8-Tap
Quad
Quad
Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
What makes KOMOS Double-Wide Kegerator better than the rest?
Designed to hold up to EIGHT 5-gallon Slimline Torpedo homebrew kegs
Serve ice cold beer even in the warmest environments thanks to highly-efficient refrigeration components
Faucets mount to a high-quality stainless steel tower, rather than cheap chrome plated tower
Interior fan diverts cold air up into the tower to keep your beer lines cold and reduce foaming
EVABarrier double walled draft tubing protects your beer against oxidation
Duotight push-to-connect fittings make assembly a breeze
Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted
Faucets sold separately
Some people say that one kegerator just isn't enough—but those people never met the KOMOS Double-Wide Kegerator. With a stunning 8-keg capacity and double-tower configuration, this beast of a home kegerator can house enough beer to satisfy even the thirstiest brewers.
Please note: this Double-Wide Kegerator with Stainless Double T Bar Tower package does not come with faucets as standard. Select one of the recommended options below to add faucets to your order, or purchase your preferred faucets separately.The included tower shanks are not compatible with Perlick Flow Control faucets.
The KOMOS Double-Wide Kegerator offers the same stunning set of features that clearly separate the standard model as the most modern kegerator on the market. With more interior space than any other home kegerator model, the KOMOS Double-Wide Kegerator is designed to fit up to eight 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26-82°F, dual gas inlets at the back, stainless steel internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator.
The most eye-catching difference between the KOMOS Double-Wide and other kegerators is definitely the capacity. With an extra wide interior and double tower configuration, this is likely the only home kegerator you'll find that can hold up to eight 5-gallon Slimline Torpedo or Ball Lock Corny kegs.
Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Many kegerators only have one inlet that is only wide enough for a single line to pass through. Both inlets on the back of the KOMOS unit are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE133) as a quick connect option for your gas lines.
Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the towers to chill your draft lines.
Extra Wide Temperature Range is Perfect for Homebrewers
The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice.
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines. We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
KOMOS Regulator
The included high quality KOMOS regulator maintains consistent pressure. The regulator includes a blow-off PRV with pull ring for safety and relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line.
Added Features
One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China.
The countertop drip trays couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Feature Summary:
Stainless Steel Air Cooled Double T Bar Tower
Duotight Fittings make connecting draft lines a breeze
Digital Thermostat with wide 26 - 82° F temp range.
Robust KOMOS Dual Gauge Regulator included
CO2 Tank holder mounts on back of kegerator (tank not included)
Efficient and powerful compressor
Stainless Steel Door
Countertop Style Drip Trays
Stainless Steel Floor for additional keg support
Includes EVABarrier beer and gas tubing
Beverage line measures 4mm ID x 8mm OD
1 x 1.7m length of line per tap
Gas line measures 5mm ID x 8mm OD
1 x 12m roll
Gas lines can be cut to whatever length best suits your needs
Duotight adapters for draft shank and regulator connections
Duotight tee fittings for splitting gas lines
You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny
For ball lock and pin lock disconnects we recommend DUO106
For commercial sanke keg couplers we recommend DUO104
Detailed instructions on assembly and use
Specifications:
35.4" wide
27.8" deep
34.3" with CO2 mount
33" Tall (fridge only)
35.5" with Caster wheels
49.25" with tower
51.5" with Casters and Tower
110V - 50 hz
0.9 Amp draw
Optimal ambient temperature is 65°F - 80°F
Internal Dimensions:
31.6" wide
20.4" deep
17.1" on the left side where the compressor sits
28.3" tall
What Fits:
5 Gal. Torpedo Keg - 6
5 Gal. Slimline Torpedo Keg - 8
6 Gal. Torpedo Keg - 6
5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 6
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 8
5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 6
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 2
7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 3
15.5 Gal. Half Barrel Keg (Full Size Keg) - 2
See below for the Kegerator Instruction Manual.
Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
What makes KOMOS Double-Wide Kegerator better than the rest?
Designed to hold up to EIGHT 5-gallon Slimline Torpedo homebrew kegs
Serve ice cold beer even in the warmest environments thanks to highly-efficient refrigeration components
Faucets mount to a high-quality stainless steel tower, rather than cheap chrome plated tower
Interior fan diverts cold air up into the tower to keep your beer lines cold and reduce foaming
EVABarrier double walled draft tubing protects your beer against oxidation
Duotight push-to-connect fittings make assembly a breeze
Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted
Faucets sold separately
Some people say that one kegerator just isn't enough—but those people never met the KOMOS Double-Wide Kegerator. With a stunning 8-keg capacity and double-tower configuration, this beast of a home kegerator can house enough beer to satisfy even the thirstiest brewers.
Please note: this Double-Wide Kegerator with Stainless Double T Bar Tower package does not come with faucets as standard. Select one of the recommended options below to add faucets to your order, or purchase your preferred faucets separately.The included tower shanks are not compatible with Perlick Flow Control faucets.
The KOMOS Double-Wide Kegerator offers the same stunning set of features that clearly separate the standard model as the most modern kegerator on the market. With more interior space than any other home kegerator model, the KOMOS Double-Wide Kegerator is designed to fit up to eight 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26-82°F, dual gas inlets at the back, stainless steel internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator.
The most eye-catching difference between the KOMOS Double-Wide and other kegerators is definitely the capacity. With an extra wide interior and double tower configuration, this is likely the only home kegerator you'll find that can hold up to eight 5-gallon Slimline Torpedo or Ball Lock Corny kegs.
Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Many kegerators only have one inlet that is only wide enough for a single line to pass through. Both inlets on the back of the KOMOS unit are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE133) as a quick connect option for your gas lines.
Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the towers to chill your draft lines.
Extra Wide Temperature Range is Perfect for Homebrewers
The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice.
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines. We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
KOMOS Regulator
The included high quality KOMOS regulator maintains consistent pressure. The regulator includes a blow-off PRV with pull ring for safety and relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line.
Added Features
One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China.
The countertop drip trays couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Feature Summary:
Stainless Steel Air Cooled Double T Bar Tower
Duotight Fittings make connecting draft lines a breeze
Digital Thermostat with wide 26 - 82° F temp range.
Robust KOMOS Dual Gauge Regulator included
CO2 Tank holder mounts on back of kegerator (tank not included)
Efficient and powerful compressor
Stainless Steel Door
Countertop Style Drip Trays
Stainless Steel Floor for additional keg support
Includes EVABarrier beer and gas tubing
Beverage line measures 4mm ID x 8mm OD
1 x 1.7m length of line per tap
Gas line measures 5mm ID x 8mm OD
1 x 12m roll
Gas lines can be cut to whatever length best suits your needs
Duotight adapters for draft shank and regulator connections
Duotight tee fittings for splitting gas lines
You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny
For ball lock and pin lock disconnects we recommend DUO106
For commercial sanke keg couplers we recommend DUO104
Detailed instructions on assembly and use
Specifications:
35.4" wide
27.8" deep
34.3" with CO2 mount
33" Tall (fridge only)
35.5" with Caster wheels
49.25" with tower
51.5" with Casters and Tower
110V - 50 hz
0.9 Amp draw
Optimal ambient temperature is 65°F - 80°F
Internal Dimensions:
31.6" wide
20.4" deep
17.1" on the left side where the compressor sits
28.3" tall
What Fits:
5 Gal. Torpedo Keg - 6
5 Gal. Slimline Torpedo Keg - 8
6 Gal. Torpedo Keg - 6
5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 6
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 8
5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 6
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 2
7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 3
15.5 Gal. Half Barrel Keg (Full Size Keg) - 2
See below for the Kegerator Instruction Manual.
Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
This male to male coupler is commonly used in draft line cleaning. It allows the connection of draft lines for cleaning loops. Male beer thread to male beer thread (5/8" BSP).
The KOMOS draft line kit includes lengths of EVABarrier draft tubing, the same tubing used in all KOMOS kegerators. Each kit includes beer line and gas line, and Duotight tee fittings to split your gas line (excluding single tap kit). See below for recommended Duotight fittings.
EVABarrier tubing is a high-quality double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! The outer barrier gives the tubing a nice stiffness that makes it extremely kink resistant and perfect for use with push-in fittings. The inner wall is an excellent gas barrier, keeping oxygen out and CO2 in. The internal surface of the tubing is extremely smooth, making it difficult for bacteria and microbes to cling to.
Kits Include:
Beverage line
Measures 4mm ID x 8mm OD
1 x 1.7m length of line per tap
Gas line
Measures 5mm ID x 8mm OD
1 x line of varying length depending on number of taps (2, 2.5, or 3m)
4 Tap kit includes uncut rolls of bev & gas line
We recommend cutting bev lines to 5.5-6.5 ft. lengths
Gas lines can be cut to whatever length best suits your needs
Duotight tee fittings to split gas line (for 2-Tap and higher)
The KOMOS multi tool is a convenient instrument to keep nearby that is suitable for most of the fittings you'll encounter when setting up or making adjustments to your kegerator or keezer. If you're kegging your brew then you're well acquainted with the many nuts, bolts, and clamps it takes to rig up a draft system. Even small adjustments will often have you walking back and forth from the tool box before the job done. The KOMOS draft tool offers 7 unique functions for tasks including faucet collar adjustments, shank hex nut adjustments, connecting or disconnecting a CO2 regulator and tank, removing Duotight fittings, and, most importantly, removing bottle caps from beer bottles.
The KOMOS multi tool is suitable for most connection adjustments, but if you're adjusting a CO2 regulator nut that has been overtightened, we recommend using a standard Crescent wrench for extra torque.
Functions:
CO2 Regulator Nut Spanner
Shank Hex Nut Spanner
Faucet Coupling Ring Pin Wrench
Flare Swivel Nut Spanner
8 mm Duotight Removal
9.5 mm Duotight Removal
Bottle Opener
Made of stainless steal.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
The KOMOS DraftMaster is a perfect solution for small beer-serving establishments. This is very unique, dual purpose glycol beer chiller, with the ability to chill a trunk line while also being able to cool 4 additional unfrigerated beers inline. It features 4 built-in stainless steel draft coils that remain submersed in a glycol solution reservoir, as well as a dedicated submersible draft line pump that can be used to pump glycol solution through flooded draft towers or other draft line chilling apparatuses.
The draft coils are made from 8 mm OD stainless steel tubing. The inlets and outlets come ready for use with 8 mm Duotight fittings, or standard hose clamp / compression fittings if preferred. The temperature drop of the beverage after one pass through the coil will depend on several factors, such as the temp of the pre-chilled beer, reservoir solution, and ambient environment. Ideally, the DraftMaster should be used in ambient temperatures below 80°F with a 30% glycol solution. If operating the unit in hotter climates or with a non-glycol cooling solution, if you are using the inline chilling coils you may need to pass the beverage through two coils to lower it to serving temperature.
Although the DraftMaster is ideally used with propylene glycol to lower the cooling solution below 32°F, home users may find it works perfectly well with 100% distilled/RO water. We recommend leaving the reservoir temperature at or above 38°F when using water only, which will work well for cooling a single KOMOS Cobra tower or other glycol-ready draft tower.
Specifications:
4 built-in 8 mm OD stainless draft coils
Submersible pump:
35 watts
Max Head: 21 ft. (6.5 m)
Max Flow Rate: 528 GPH (2000 LPH)
30L / 8 Gallon Water Tank Capacity
3/8 HP compressor
750 Watt/2600 btu Cooling Capacity
Draft coils made from 304 stainless steel
Labeled IN and OUT bulkheads
r134a Refrigerant
110V (3.6 amps)
Dimensions: 16.1" x 16.1" x 26"
Wheels included
CE Certified
Warning: do not set the reservoir temperature controller lower than 25°F (-4°C). Running the chiller below this temperature may damage the unit.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
The KOMOS DraftMaster is a perfect solution for small beer-serving establishments. This is very unique, dual purpose glycol beer chiller, with the ability to chill a trunk line while also being able to cool 4 additional unfrigerated beers inline. It features 4 built-in stainless steel draft coils that remain submersed in a glycol solution reservoir, as well as a dedicated submersible draft line pump that can be used to pump glycol solution through flooded draft towers or other draft line chilling apparatuses.
The draft coils are made from 8 mm OD stainless steel tubing. The inlets and outlets come ready for use with 8 mm Duotight fittings, or standard hose clamp / compression fittings if preferred. The temperature drop of the beverage after one pass through the coil will depend on several factors, such as the temp of the pre-chilled beer, reservoir solution, and ambient environment. Ideally, the DraftMaster should be used in ambient temperatures below 80°F with a 30% glycol solution. If operating the unit in hotter climates or with a non-glycol cooling solution, if you are using the inline chilling coils you may need to pass the beverage through two coils to lower it to serving temperature.
Although the DraftMaster is ideally used with propylene glycol to lower the cooling solution below 32°F, home users may find it works perfectly well with 100% distilled/RO water. We recommend leaving the reservoir temperature at or above 38°F when using water only, which will work well for cooling a single KOMOS Cobra tower or other glycol-ready draft tower.
Specifications:
4 built-in 8 mm OD stainless draft coils
Submersible pump:
35 watts
Max Head: 21 ft. (6.5 m)
Max Flow Rate: 528 GPH (2000 LPH)
30L / 8 Gallon Water Tank Capacity
3/8 HP compressor
750 Watt/2600 btu Cooling Capacity
Draft coils made from 304 stainless steel
Labeled IN and OUT bulkheads
r134a Refrigerant
110V (3.6 amps)
Dimensions: 16.1" x 16.1" x 26"
Wheels included
CE Certified
Warning: do not set the reservoir temperature controller lower than 25°F (-4°C). Running the chiller below this temperature may damage the unit.
Keep multiple kegs under pressure at once! Predrilled holes for easy mounting EVABarrier Draft Tubing fits perfectly on the 1/4 in flares Gas manifolds are the best way to provide CO2 to multiple kegs inside your kegerator or keezer. The KOMOS manifold features 1/4" flare gas inlet and check valves that provide much more flexibility compared to manifolds with barbed valves. Choose the type and size of draft tubing that you prefer. Use 1/4" or 5/16" gas line with the appropriate Flare Fitting Set (KEG607 or KEG640), or use EVABarrier—our draft line of choice—with the appropriately sized Duotight Fitting (DUO106 or DUO120). You can also replace one or more of the check valves with a Ball Lock Post Bulkhead, which allows you to use a gas-in ball lock jumper line as a quick connect option. Need something bigger than a 4-way manifold? No problem! With this 1/4" Nipple, you can join multiple manifolds for as many outlets as you need. Features: 1/4" Flare connections 1/4" BSP ball valves Rated to 100 psi Wall mount holes Made from aluminum, brass, and stainless steel Size Overall Length 2-way 5.25" 3-way 7.25" 4-way 9.25" The above measurements are from the tip for the brass flare inlet to the plug on the opposite end. Each manifold measures approximately 3.5" from the mounting holes to the tip of the valve. Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
Due to high demand, the 2.5 gal is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Everything you need to start enjoying your delicious beer on draft!
No longer will you need to clean, sanitize, fill, and cap 50+ beer bottles
Includes brand new KOMOS CO2 Cylinder and robust KOMOS Dual Gauge CO2 Regulator
Featuring a brand-new ball lock corny keg with rubber booted bottom and top handles
EVABarrier beer & gas line with Duotight Quick Disconnects and adapter fittings
The KOMOS Homebrew Kegging Kit has everything you need to start enjoying your delicious creations on draft. Whether you've brewed one batch or one hundred batches, you're already familiar with the laborious process of bottling your beer. Cleaning, sanitizing, filling and capping 50+ 12 oz bottles can take a lot of time and effort. The very first thing you'll appreciate when switching to kegging is that there's only one vessel you need to worry about. But it's still no comparison to the pleasure of pouring a glass of beer straight from the tap!
From tank to tap, this kegging kit is made from the highest-quality components, starting with a brand new KOMOS 5 lb CO2 tank and KOMOS Dual Gauge Regulator. Choose from 2.5 or 5 gallon Ball Lock Corny Keg. These brand-new kegs are made in the style of the iconic Cornelius homebrew keg with rubber base and molded rubber handles at the top. Everything it connected with EVABarrier draft tubing and Duotight push-to-connect fittings. EVABarrier is our draft line of choice due to the double-walled design that protects your beer from oxygen ingress and CO2 loss. Duotight fittings make everything come together quickly and easily—and they're just as easy to disconnect if you need to clean or reconfigure your setup.
Included:
KOMOS Dual Gauge Regulator
KOMOS 5 lb aluminum CO2 cylinder
Ball Lock Corny Keg (2.5 or 5 gal)
EVABarrier beer & gas lines
Duotight Ball Lock Quick Disconnects (QDs)
Duotight-compatible plastic picnic faucet
KOMOS 7-in-1 Multi Tool Wrench
Please note: the CO2 tank ships empty. It can be filled or swapped for a full tank at your local welding or homebrew supply store.
Everything you need to start enjoying your delicious beer on draft!
No longer will you need to clean, sanitize, fill, and cap 50+ beer bottles
Includes brand new KOMOS CO2 Cylinder and robust KOMOS Dual Gauge CO2 Regulator
Featuring the hottest homebrew keg around—the all-stainless, stackable Slimline Torpedo Keg
EVABarrier beer & gas line with Duotight Quick Disconnects and adapter fittings
The KOMOS Homebrew Kegging Kit has everything you need to start enjoying your delicious creations on draft. Whether you've brewed one batch or one hundred batches, you're already familiar with the laborious process of bottling your beer. Cleaning, sanitizing, filling and capping 50+ 12 oz bottles can take a lot of time and effort. The very first thing you'll appreciate when switching to kegging is that there's only one vessel you need to worry about. But it's still no comparison to the pleasure of pouring a glass of beer straight from the tap!
From tank to tap, this kegging kit is made from the highest-quality components, starting with a brand new KOMOS 5 lb CO2 tank and KOMOS Dual Gauge Regulator. Choose from 1.5, 2.5, or 5 gallon Slimline Torpedo Keg. These are the hottest homebrew kegs on the market, featuring stackable base, rolled stainless handles, and labeled In and Out body connects for your QDs. Everything it connected with EVABarrier draft tubing and Duotight push-to-connect fittings. EVABarrier is our draft line of choice due to the double-walled design that protects your beer from oxygen ingress and CO2 loss. Duotight fittings make everything come together quickly and easily—and they're just as easy to disconnect if you need to clean or reconfigure your setup.
Included:
KOMOS Dual Gauge Regulator
KOMOS 5 lb aluminum CO2 cylinder
Slimline Ball Lock Torpedo Keg (1.5, 2.5, or 5 gal)
EVABarrier beer & gas lines
Duotight Ball Lock Quick Disconnects (QDs)
Duotight-compatible plastic picnic faucet
KOMOS 7-in-1 Multi Tool Wrench
Please note: the CO2 tank ships empty. It can be filled or swapped for a full tank at your local welding or homebrew supply store.
Everything you need to start enjoying your delicious beer on draft!
No longer will you need to clean, sanitize, fill, and cap 50+ beer bottles
Includes brand new KOMOS CO2 Cylinder and robust KOMOS Dual Gauge CO2 Regulator
Featuring the hottest homebrew keg around—the all-stainless, stackable Torpedo Keg
EVABarrier beer & gas line with Duotight Quick Disconnects and adapter fittings
The KOMOS Homebrew Kegging Kit has everything you need to start enjoying your delicious creations on draft. Whether you've brewed one batch or one hundred batches, you're already familiar with the laborious process of bottling your beer. Cleaning, sanitizing, filling and capping 50+ 12 oz bottles can take a lot of time and effort. The very first thing you'll appreciate when switching to kegging is that there's only one vessel you need to worry about. But it's still no comparison to the pleasure of pouring a glass of beer straight from the tap!
From tank to tap, this kegging kit is made from the highest-quality components, starting with a brand new KOMOS 5 lb CO2 tank and KOMOS Dual Gauge Regulator. Choose from 1.5, 2.5, or 5 gallon Torpedo Keg. These are the hottest homebrew kegs on the market, featuring stackable base, rolled stainless handles, and labeled In and Out body connects for your QDs. Everything it connected with EVABarrier draft tubing and Duotight push-to-connect fittings. EVABarrier is our draft line of choice due to the double-walled design that protects your beer from oxygen ingress and CO2 loss. Duotight fittings make everything come together quickly and easily—and they're just as easy to disconnect if you need to clean or reconfigure your setup.
Included:
KOMOS Dual Gauge Regulator
KOMOS 5 lb aluminum CO2 cylinder
Standard Ball Lock Torpedo Keg (1.5, 2.5, or 5 gal)
EVABarrier beer & gas lines
Duotight Ball Lock Quick Disconnects (QDs)
Duotight-compatible plastic picnic faucet
KOMOS 7-in-1 Multi Tool Wrench
Please note: the CO2 tank ships empty. It can be filled or swapped for a full tank at your local welding or homebrew supply store.
This beverage line jumper connects to the bev output on a ball lock homebrew keg and to the back of a pass through shank on a jockey box. This is a direct replacement to the beverage jumper that comes with the KOMOS Jockey Box Connection Kits (D1761 & D1763). Specifications: 5 ft of 5/16" ID Beverage Tubing 5/16" Tailpiece Elbow Flared Ball Lock Bev Out
This beverage line jumper connects to the bev output on a standard U.S. D-style sanke keg coupler and to the back of a pass through shank on a jockey box. This is a direct replacement to the beverage jumper that comes with the KOMOS Jockey Box Connection Kits (D1760 & D1762). Specifications: 5 ft of 3/8" ID beverage tubing 3/8" Tailpiece and Tailpiece Elbow
Get your KOMOS Jockey Box hooked up and ready to flow with our preconfigured connection kits! This connection kit includes everything necessary to hook up two Ball Lock kegs to your KOMOS Jockey Box except for the CO2 tank and regulator. Choose the connection kit that matches the number of taps you require and the type of keg being served, add on a regulator or CO2 tank if you do not already own one, and get ready to pour flawless pints!
KOMOS Dual Tap Ball Lock Connection Kit includes:
3 x 5 ft. lengths of 5/16" CO2 Tubing
2 x Ball Lock Gas In Disconnects
2 x Ball Lock Bev Out Disconnects
2 x 5 ft. Beverage Jumpers with Stainless Steel Tailpieces
Two-Way Aluminum Air Manifold
Hose Clamps and Rubber Washers
This Kit Does Not Include a CO2 Tank or Regulator, but both can be added from the drop-down menus above or under "You Might Also Need" below.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Get your KOMOS Jockey Box hooked up and ready to flow with our preconfigured connection kits! This connection kit includes everything necessary to hook up four Ball Lock kegs to your KOMOS Jockey Box except for the CO2 tank and regulator. Choose the connection kit that matches the number of taps you require and the type of keg being served, add on a regulator or CO2 tank if you do not already own one, and get ready to pour flawless pints!
KOMOS 4 Tap Ball Lock Connection Kit includes:
5 x 5 ft. lengths of 5/16" CO2 Tubing
4 x Ball Lock Gas In Disconnects
4 x Ball Lock Bev Out Disconnects
4 x 5 ft. Beverage Jumpers with Stainless Steel Tailpieces
Four-Way Aluminum Air Manifold
Hose Clamps and Rubber Washers
This Kit Does Not Include a CO2 Tank or Regulator, but both can be added from the drop-down menus above or under "You Might Also Need" below.
Get your KOMOS Jockey Box hooked up and ready to flow with our preconfigured connection kits! This connection kit includes everything necessary to hook up two American "D-Style" Sanke kegs to your KOMOS Jockey Box except for the CO2 tank and regulator. Choose the connection kit that matches the number of taps you require and the type of keg being served, add on a regulator or CO2 tank if you do not already own one, and get ready to pour flawless pints!
KOMOS Dual Tap Sanke Keg Connection Kit includes:
3 x 5 ft. lengths of 5/16" CO2 Tubing
2 x American Sankey "D" Couplers
2 x 5 ft. Beverage Jumpers with Stainless Steel Tailpieces
Two-Way Aluminum Air Manifold
Hose Clamps and Rubber Washers
This Kit Does Not Include a CO2 Tank or Regulator, but both can be added from the drop-down menus above or under "You Might Also Need" below.
Get your KOMOS Jockey Box hooked up and ready to flow with our preconfigured connection kits! This connection kit includes everything necessary to hook up four American "D-Style" Sanke kegs to your KOMOS Jockey Box except for the CO2 tank and regulator. Choose the connection kit that matches the number of taps you require and the type of keg being served, add on a regulator or CO2 tank if you do not already own one, and get ready to pour flawless pints!
KOMOS 4 Tap Sanke Keg Connection Kit includes:
5 x 5 ft. lengths of 5/16" CO2 Tubing
4 x American Sankey "D" Couplers
4 x 5 ft. Beverage Jumpers with Stainless Steel Tailpieces
Four-Way Aluminum Air Manifold
Hose Clamps and Rubber Washers
This Kit Does Not Include a CO2 Tank or Regulator, but both can be added from the drop-down menus above or under "You Might Also Need" below.
The KOMOS Keg Filler FOB is designed by our in-house engineers to stop the flow of beer once a keg is full. With a sleak design, it is easy to clean and extremely versatile if you wish to reconfigure it for another task.
The KOMOS Keg FIller FOB is intended as an upgrade to our Four Station Manual Keg Filler and Single Station Manual Keg Filler.
Features:
Borosilicate Sight Glass
Beer Thread (5/8" BSP)
Easy to clean
Silicone Washers
Stainless Construction
Food Grade Check Ball
NOTE: Four Station Manual Keg Filler requires four Keg Filler FOBs
Easily connect Ball Lock kegs to your new KOMOS™ Kegerator! These connection kits come with a single set of plastic Ball Lock fittings along with Duotight adapters to connect with the tubing provided with your kegerator. Choose from the number of taps on your kegerator and you will receive a set of Ball Lock QDs and Duotight adapters for each keg.
Reduce first pour foam by keeping your draft lines icy cold Extra thick neoprene insulates the tower, preventing excess temperature loss to the ambient environment Reduce cooling cycles and save power Customizable to your number and arrangement of faucets Tailor-made for KOMOS kegerators and works with most 3" draft towers The KOMOS draft tower sleeve is made from extra thick 7 mm neoprene, providing great insulation to your tower that will keep your draft lines icy cold. Although the KOMOS kegerators come standard with a tower cooling fan, the stainless steel tower will lose some of that coldness to the warmer ambient environment. By insulating the tower, you can minimize temperature loss, reduce cooling cycles, and saving power. This neoprene insulating tower sleeve will fit KOMOS kegerators like a glove, but can be used with most 3" draft towers. The sleeve comes without holes so it can be customized to fit your faucet arrangement, whether it be single, double, or triple tap. Also available in a size suitable for 4.5" diameter draft towers. Installation: Remove the faucets from the tower, keeping the shanks in place Pull the sleeve down over the tower Mark the position of the shanks and use a sharp pair of scissors to cut a hole in the sleeve Stretch the hole over the shanks and reattach the faucets
Reduce first pour foam by keeping your draft lines icy cold Extra thick neoprene insulates the tower, preventing excess temperature loss to the ambient environment Reduce cooling cycles and save power Customizable to your number and arrangement of faucets Tailor-made for KOMOS kegerators and works with most 4.5" draft towers The KOMOS draft tower sleeve is made from extra thick 7 mm neoprene, providing great insulation to your tower that will keep your draft lines icy cold. Although the KOMOS kegerators come standard with a tower cooling fan, the stainless steel tower will lose some of that coldness to the warmer ambient environment. By insulating the tower, you can minimize temperature loss, reduce cooling cycles, and saving power. This neoprene insulating tower sleeve will fit KOMOS kegerators like a glove, but can be used with most 4.5" draft towers. The sleeve comes without holes so it can be customized to fit your faucet arrangement, whether it be single, double, or triple tap. Also available in a size suitable for 3" diameter draft towers. Installation: Remove the faucets from the tower, keeping the shanks in place Pull the sleeve down over the tower Mark the position of the shanks and use a sharp pair of scissors to cut a hole in the sleeve Stretch the hole over the shanks and reattach the faucets
Upgrade the wheels of your Komos kegerator to these heavy duty 100mm wheels. Each wheel is rated up to 220 lbs and made with steel bearings. Includes 2 locking and 2 non-locking wheels. Compatible with Standard and Deluxe models. For the Double-Wide model, see here. Includes 2x locking wheels and 2x non-locking. NOTE: The locking wheels need to be attached on the non-hinged side of the door as the hinge will get in the way of the locking mechanism. Mounting screws are not included.
Upgrade the wheels of your Komos kegerator to these heavy duty 100mm wheels. Each wheel is rated up to 220 lbs and made with steel bearings. Includes 2 locking and 4 non-locking wheels. Compatible with Double-Wide model. For Standard and Deluxe models, see here. Includes 2x locking wheels and 4x non-locking. NOTE: The locking wheels need to be attached on the non-hinged side of the door as the hinge will get in the way of the locking mechanism. Mounting screws are not included.
Easily connect Sanke kegs to your new KOMOS™ Kegerator! These connection kits come with a single a single Sanke D-style coupler with Duotight adapters to connect with the tubing provided with your kegerator. Choose from the number of taps on your kegerator and you will receive a set of Sanke D-style coupler and Duotight adapters for each keg.
Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits) Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted Works prefectly as a fermentation chamber, or add draft tower and faucet options to deck out the kegerator as you see fit! The KOMOS Kegerator features upgraded components for faster chilling and more efficient operation. It also has a redesigned interior that fits up to four 5-gallon kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless steel door, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller that can adjust internal temperatures from 26 - 82°F. This allows homebrewers to use it for fermentation and is something that other kegerators don't do. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. KOMOS Regulator The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Optional Draft Towers Both draft tower options are made from stainless steel, a huge upgrade over chrome plated towers commonly found on other kegerators. The difference is simply in the appearance. Do you prefer the sleek look of brushed stainless, or the quietly ominous appearance of matte black? The matte black tower option pairs perfectly with the NukaTap Stealth Bomber faucets, which also feature a matte black finish. Or mix and match. You do you! Each draft tower kit comes standard with Duotight fittings and EVABarrier draft tubing. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier—no more hose clamps or heating water to soften tubing. Duotight fittings are included for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Optional Faucets The most popular forward-sealing faucets we offer are, without a doubt, the Intertap and the NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Both faucets feature s modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout, and all attachments are cross compatible. The Intertap boasts all stainless steel internal components, whereas NukaTap's internal shuttle is made from TPV, but the NukaTap was designed with a lower thermal mass for reduced first pour foam. And for the price-conscious brewer, we off the industry standard beer faucet. It may not have the same bells and whistles as the other options, but it is no less dependable. For more info on each faucet option, check them out below the description. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Drip Tray is removable for easy cleaning Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Outdoor Kegerator.
Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits) Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted Works prefectly as a fermentation chamber, or add draft tower and faucet options to deck out the kegerator as you see fit! The KOMOS Kegerator features upgraded components for faster chilling and more efficient operation. It also has a redesigned interior that fits up to four 5-gallon kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless steel door, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller that can adjust internal temperatures from 26 - 82°F. This allows homebrewers to use it for fermentation and is something that other kegerators don't do. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. KOMOS Regulator The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Optional Draft Towers Both draft tower options are made from stainless steel, a huge upgrade over chrome plated towers commonly found on other kegerators. The difference is simply in the appearance. Do you prefer the sleek look of brushed stainless, or the quietly ominous appearance of matte black? The matte black tower option pairs perfectly with the NukaTap Stealth Bomber faucets, which also feature a matte black finish. Or mix and match. You do you! Each draft tower kit comes standard with Duotight fittings and EVABarrier draft tubing. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier—no more hose clamps or heating water to soften tubing. Duotight fittings are included for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Optional Faucets The most popular forward-sealing faucets we offer are, without a doubt, the Intertap and the NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Both faucets feature s modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout, and all attachments are cross compatible. The Intertap boasts all stainless steel internal components, whereas NukaTap's internal shuttle is made from TPV, but the NukaTap was designed with a lower thermal mass for reduced first pour foam. And for the price-conscious brewer, we off the industry standard beer faucet. It may not have the same bells and whistles as the other options, but it is no less dependable. For more info on each faucet option, check them out below the description. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Drip Tray is removable for easy cleaning Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Outdoor Kegerator.
Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits) Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted Works prefectly as a fermentation chamber, or add draft tower and faucet options to deck out the kegerator as you see fit! The KOMOS Kegerator features upgraded components for faster chilling and more efficient operation. It also has a redesigned interior that fits up to four 5-gallon kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless steel door, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller that can adjust internal temperatures from 26 - 82°F. This allows homebrewers to use it for fermentation and is something that other kegerators don't do. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. KOMOS Regulator The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Optional Draft Towers Both draft tower options are made from stainless steel, a huge upgrade over chrome plated towers commonly found on other kegerators. The difference is simply in the appearance. Do you prefer the sleek look of brushed stainless, or the quietly ominous appearance of matte black? The matte black tower option pairs perfectly with the NukaTap Stealth Bomber faucets, which also feature a matte black finish. Or mix and match. You do you! Each draft tower kit comes standard with Duotight fittings and EVABarrier draft tubing. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier—no more hose clamps or heating water to soften tubing. Duotight fittings are included for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Optional Faucets The most popular forward-sealing faucets we offer are, without a doubt, the Intertap and the NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Both faucets feature s modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout, and all attachments are cross compatible. The Intertap boasts all stainless steel internal components, whereas NukaTap's internal shuttle is made from TPV, but the NukaTap was designed with a lower thermal mass for reduced first pour foam. And for the price-conscious brewer, we off the industry standard beer faucet. It may not have the same bells and whistles as the other options, but it is no less dependable. For more info on each faucet option, check them out below the description. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Drip Tray is removable for easy cleaning Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Outdoor Kegerator.
Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits) Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted Works prefectly as a fermentation chamber, or add draft tower and faucet options to deck out the kegerator as you see fit! The KOMOS Kegerator features upgraded components for faster chilling and more efficient operation. It also has a redesigned interior that fits up to four 5-gallon kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless steel door, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller that can adjust internal temperatures from 26 - 82°F. This allows homebrewers to use it for fermentation and is something that other kegerators don't do. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. KOMOS Regulator The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Optional Draft Towers Both draft tower options are made from stainless steel, a huge upgrade over chrome plated towers commonly found on other kegerators. The difference is simply in the appearance. Do you prefer the sleek look of brushed stainless, or the quietly ominous appearance of matte black? The matte black tower option pairs perfectly with the NukaTap Stealth Bomber faucets, which also feature a matte black finish. Or mix and match. You do you! Each draft tower kit comes standard with Duotight fittings and EVABarrier draft tubing. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier—no more hose clamps or heating water to soften tubing. Duotight fittings are included for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Optional Faucets The most popular forward-sealing faucets we offer are, without a doubt, the Intertap and the NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Both faucets feature s modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout, and all attachments are cross compatible. The Intertap boasts all stainless steel internal components, whereas NukaTap's internal shuttle is made from TPV, but the NukaTap was designed with a lower thermal mass for reduced first pour foam. And for the price-conscious brewer, we off the industry standard beer faucet. It may not have the same bells and whistles as the other options, but it is no less dependable. For more info on each faucet option, check them out below the description. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Drip Tray is removable for easy cleaning Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Outdoor Kegerator.
Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits) Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted Works prefectly as a fermentation chamber, or add draft tower and faucet options to deck out the kegerator as you see fit! The KOMOS Kegerator features upgraded components for faster chilling and more efficient operation. It also has a redesigned interior that fits up to four 5-gallon kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless steel door, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller that can adjust internal temperatures from 26 - 82°F. This allows homebrewers to use it for fermentation and is something that other kegerators don't do. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. KOMOS Regulator The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Optional Draft Towers Both draft tower options are made from stainless steel, a huge upgrade over chrome plated towers commonly found on other kegerators. The difference is simply in the appearance. Do you prefer the sleek look of brushed stainless, or the quietly ominous appearance of matte black? The matte black tower option pairs perfectly with the NukaTap Stealth Bomber faucets, which also feature a matte black finish. Or mix and match. You do you! Each draft tower kit comes standard with Duotight fittings and EVABarrier draft tubing. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier—no more hose clamps or heating water to soften tubing. Duotight fittings are included for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Optional Faucets The most popular forward-sealing faucets we offer are, without a doubt, the Intertap and the NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Both faucets feature s modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout, and all attachments are cross compatible. The Intertap boasts all stainless steel internal components, whereas NukaTap's internal shuttle is made from TPV, but the NukaTap was designed with a lower thermal mass for reduced first pour foam. And for the price-conscious brewer, we off the industry standard beer faucet. It may not have the same bells and whistles as the other options, but it is no less dependable. For more info on each faucet option, check them out below the description. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Drip Tray is removable for easy cleaning Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Outdoor Kegerator.
Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits) Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted Works prefectly as a fermentation chamber, or add draft tower and faucet options to deck out the kegerator as you see fit! The KOMOS Kegerator features upgraded components for faster chilling and more efficient operation. It also has a redesigned interior that fits up to four 5-gallon kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless steel door, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. KOMOS Regulator The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Optional Draft Towers Both draft tower options are made from stainless steel, a huge upgrade over chrome plated towers commonly found on other kegerators. The difference is simply in the appearance. Do you prefer the sleek look of brushed stainless, or the quietly ominous appearance of matte black? The matte black tower option pairs perfectly with the NukaTap Stealth Bomber faucets, which also feature a matte black finish. Or mix and match. You do you! Each draft tower kit comes standard with Duotight fittings and EVABarrier draft tubing. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier—no more hose clamps or heating water to soften tubing. Duotight fittings are included for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Optional Faucets The most popular forward-sealing faucets we offer are, without a doubt, the Intertap and the NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Both faucets feature s modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout, and all attachments are cross compatible. The Intertap boasts all stainless steel internal components, whereas NukaTap's internal shuttle is made from TPV, but the NukaTap was designed with a lower thermal mass for reduced first pour foam. And for the price-conscious brewer, we off the industry standard beer faucet. It may not have the same bells and whistles as the other options, but it is no less dependable. For more info on each faucet option, check them out below the description. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Drip Tray is removable for easy cleaning Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Outdoor Kegerator.
Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits) Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted Works prefectly as a fermentation chamber, or add draft tower and faucet options to deck out the kegerator as you see fit! The KOMOS Kegerator features upgraded components for faster chilling and more efficient operation. It also has a redesigned interior that fits up to four 5-gallon kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless steel door, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. KOMOS Regulator The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Optional Draft Towers Both draft tower options are made from stainless steel, a huge upgrade over chrome plated towers commonly found on other kegerators. The difference is simply in the appearance. Do you prefer the sleek look of brushed stainless, or the quietly ominous appearance of matte black? The matte black tower option pairs perfectly with the NukaTap Stealth Bomber faucets, which also feature a matte black finish. Or mix and match. You do you! Each draft tower kit comes standard with Duotight fittings and EVABarrier draft tubing. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier—no more hose clamps or heating water to soften tubing. Duotight fittings are included for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Optional Faucets The most popular forward-sealing faucets we offer are, without a doubt, the Intertap and the NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Both faucets feature s modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout, and all attachments are cross compatible. The Intertap boasts all stainless steel internal components, whereas NukaTap's internal shuttle is made from TPV, but the NukaTap was designed with a lower thermal mass for reduced first pour foam. And for the price-conscious brewer, we off the industry standard beer faucet. It may not have the same bells and whistles as the other options, but it is no less dependable. For more info on each faucet option, check them out below the description. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Drip Tray is removable for easy cleaning Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Outdoor Kegerator.
Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits) Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted Works prefectly as a fermentation chamber, or add draft tower and faucet options to deck out the kegerator as you see fit! The KOMOS Kegerator features upgraded components for faster chilling and more efficient operation. It also has a redesigned interior that fits up to four 5-gallon kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless steel door, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. KOMOS Regulator The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Optional Draft Towers Both draft tower options are made from stainless steel, a huge upgrade over chrome plated towers commonly found on other kegerators. The difference is simply in the appearance. Do you prefer the sleek look of brushed stainless, or the quietly ominous appearance of matte black? The matte black tower option pairs perfectly with the NukaTap Stealth Bomber faucets, which also feature a matte black finish. Or mix and match. You do you! Each draft tower kit comes standard with Duotight fittings and EVABarrier draft tubing. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier—no more hose clamps or heating water to soften tubing. Duotight fittings are included for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Optional Faucets The most popular forward-sealing faucets we offer are, without a doubt, the Intertap and the NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Both faucets feature s modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout, and all attachments are cross compatible. The Intertap boasts all stainless steel internal components, whereas NukaTap's internal shuttle is made from TPV, but the NukaTap was designed with a lower thermal mass for reduced first pour foam. And for the price-conscious brewer, we off the industry standard beer faucet. It may not have the same bells and whistles as the other options, but it is no less dependable. For more info on each faucet option, check them out below the description. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Drip Tray is removable for easy cleaning Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Outdoor Kegerator.
Condition: Used - Good
This unit is used. It shows wear from use but is in good condition and works perfectly. It may have cosmetic defects or show other signs of previous use.
It is still covered by our No Hassle Return Policy and 1 Year Warranty Policy.
Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits)
Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted
Works prefectly as a fermentation chamber, or add draft tower and faucet options to deck out the kegerator as you see fit!
The KOMOS Kegerator features upgraded components for faster chilling and more efficient operation. It also has a redesigned interior that fits up to four 5-gallon kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless steel door, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter.
The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs.
Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE133) as a quick connect option for your gas lines.
Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines.
Extra Wide Temperature Range is Perfect for Homebrewers
The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller that can adjust internal temperatures from 26 - 82°F. This allows homebrewers to use it for fermentation and is something that other kegerators don't do. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice.
KOMOS Regulator
The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges.
Added Features
One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Optional Draft Towers
Both draft tower options are made from stainless steel, a huge upgrade over chrome plated towers commonly found on other kegerators. The difference is simply in the appearance. Do you prefer the sleek look of brushed stainless, or the quietly ominous appearance of matte black? The matte black tower option pairs perfectly with the NukaTap Stealth Bomber faucets, which also feature a matte black finish. Or mix and match. You do you!
Each draft tower kit comes standard with Duotight fittings and EVABarrier draft tubing. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier—no more hose clamps or heating water to soften tubing. Duotight fittings are included for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free.
Optional Faucets
The most popular forward-sealing faucets we offer are, without a doubt, the Intertap and the NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Both faucets feature s modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout, and all attachments are cross compatible. The Intertap boasts all stainless steel internal components, whereas NukaTap's internal shuttle is made from TPV, but the NukaTap was designed with a lower thermal mass for reduced first pour foam. And for the price-conscious brewer, we off the industry standard beer faucet. It may not have the same bells and whistles as the other options, but it is no less dependable.
For more info on each faucet option, check them out below the description.
Best Value & Backed by MoreBeer!
We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it.
Feature Summary:
Digital Thermostat with wide 26 - 82° F temp range.
Robust MKIII CO2 Regulator included
Pre cut hole on top perfectly sized for 3" diameter tower
CO2 Tank holder mounts on back of kegerator (tank not included)
Efficient and powerful compressor
Stainless Steel Door
Drip Tray is removable for easy cleaning
Aluminum floor panel for additional keg support
Rolling casters
You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny
Available Kegerator covers and "off road" casters for moving over uneven terrain.
Specifications:
23.75" wide
25" deep
31.5" with CO2 mount
32.5" Tall
35" with Caster wheels
110 v - 60 hz
0.8 Amp draw
Optimal ambient temperature is 65°F – 80°F
CSA Certified
Internal Dimensions:
19.5" wide
17" deep
16" down the center where compressor sits
28.5" tall
What Fits:
5 Gal. Torpedo Keg - 3
5 Gal. Slimline Torpedo Keg - 4
5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4
5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1
7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1
15.5 Gal. Half Barrel Keg (Full Size Keg) - 1
Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.
What makes KOMOS Kegerators better than the rest?
Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits)
Serve ice cold beer even in the warmest environments thanks to highly-efficient refrigeration components
Stainless steel forward-sealing faucets offer a huge upgrade over common chrome plated brass taps
Choose from the classic stainless, stainless with black finish or the upgraded stainless flow control model
Faucets mount to a high-quality stainless steel tower, rather than a cheap chrome plated tower
Interior fan diverts cold air up into the tower to keep your beer lines cold and reduce foaming
EVABarrier double walled draft tubing protects your beer against oxidation
Duotight push-to-connect fittings make assembly a breeze
Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted
The KOMOS Kegerator offers a stunning set of features that clearly separate this unit as the most modern kegerator on the market. With more interior space than other models, the KOMOS Kegerator is designed to fit up to four 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. Whether you choose the single, double, triple, or quad tap configuration, you'll receive stainless steel forward-sealing faucets in either classic or flow control model. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Rather than a chrome plated tower, the NukaTap faucets are mounted to a stainless steel tower that remains cool before, during, and after each pour thanks to a tower fan diverter that recirculates cold air within the kegerator and blows it up into the tower to keep your beer lines cold and reduce foaming. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26–82°F, dual gas inlets at the back, aluminum internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator.
The most eye-catching difference between the KOMOS unit and other kegerators is definitely the capacity. This is the first kegerator we have offered that comes with a quadruple tap tower option, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. KOMOS positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs.
Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines.
Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines.
Extra Wide Temperature Range is Perfect for Homebrewers
The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice.
Forward-sealing Stainless Faucets and Towers
All KOMOS kegerators come with NukaTap stainless steel forward-sealing faucets and a stainless steel draft tower. While other kegerator brands include basic, chrome-plated faucets and ABS plastic draft towers to reduce cost, KOMOS includes these premium upgrades as standard.
Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Most other kegerators on the market will include the cheapest, rear-sealing chrome-plated beer faucets that you'd find at any dive bar. KOMOS kegerators include not only a faucet that features superior pour technology, but made from stainless steel which won't corrode over years of use.
Choose from the classic forward-sealing faucet, matte black finish faucet, or the upgraded flow control model that allows you to dial in the flow rate of the beverage you're dispensing. The flow control faucet is a great option for users that often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Instantly make adjustments as you pour to dial in the flow rate. This is also a super convenient feature for when you want to grab a quick growler on your way out. By dialing back the flow rate, you can gently fill your growler so CO2 stays in solution and your beer doesn't pour flat when it comes time to share.
Click here to learn more about the Classic, Black, and Flow Control faucet models.
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
KOMOS Regulator
The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line.
Added Features
One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China.
The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Best Value & Backed by MoreBeer!
We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus, you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it.
Feature Summary:
Stainless Steel Air Cooled Tower
NukaTap Stainless Steel Forward-Sealing Faucets
Choose faucet model and number of taps above
Duotight Fittings make connecting draft lines a breeze
Digital Thermostat with wide 26 - 82° F temp range.
Robust KOMOS Dual Gauge Regulator included
CO2 Tank holder mounts on back of kegerator (tank not included)
Efficient and powerful compressor
Stainless Steel Door
Countertop Style Drip Tray
Aluminum floor for additional keg support
Includes EVABarrier beer and gas tubing
Beverage line measures 4mm ID x 8mm OD
1 x 1.7m length of line per tap
Gas line measures 5mm ID x 8mm OD
1 x line of varying length depending on number of taps (2, 2.5, or 3m)
4 Tap model includes uncut rolls of bev & gas line
We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.)
Gas lines can be cut to whatever length best suits your needs
Duotight adapters for draft shank and regulator connections
Duotight tee fittings for splitting gas lines (2, 3, 4 tap only)
You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny
For ball lock and pin lock disconnects we recommend DUO106
For commercial sanke keg couplers we recommend DUO104
Available Kegerator covers and "off road" casters for moving over uneven terrain
Detailed instructions on assembly and use
Specifications:
23.75" wide
25" deep
31.5" with CO2 mount
32.5" Tall (fridge only)
35" with Caster wheels
48.75" with tower
51" with Casters and Tower
110 v - 60 hz
0.8 Amp draw
Optimal ambient temperature is 65°F – 80°F
CSA Certified
Internal Dimensions:
19.5" wide
17" deep
16" down the center where compressor sits
28.5" tall
What Fits:
5 Gal. Torpedo Keg - 3
5 Gal. Slimline Torpedo Keg - 4
6 Gal. Torpedo Keg - 3
5 Gal. Megamouth Torpedo Keg - 1
5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4
5.2 Gal. Oxebar PET Keg - 3
5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3
(1) 5.16 Gal. Sixth Barrel Keg + (1) 7.75 Gal. Slim Quarter Keg
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1
7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1
15.5 Gal. Half Barrel Keg (Full Size Keg) - 1
See below for the Kegerator Instruction Manual.
Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
Replacement starter relay for KOMOS kegerator compressor. Includes compressor starter (black) and compressor protector (white).
Compatible with Standard and Deluxe kegerator models. Not compatible with Double-Wide, outdoor or commercial kegerators.
