Search results for "simcoe cryo"

Perfect for nearly any style. Use with confidence in Pale Ales, IPAs, Wheat Ales, Saison, Ambers, Hazys and Hoppy Lagers Aroma Profile: Citrus, Grapefruit, Stone Fruit, Tropical, Woody Alpha Acids: 21.0 – 28.0% Cryo Hop® Hop Pellets Higher AA and nearly twice the resin content of traditional T-90 hop pellets Increase yield by reducing vegetal matter in your brewhouse and fermenter Cryo Hops® provide brewers with the ability to get gigantic hop character while reducing astringent and unpleasant vegetal flavors. With a substantially higher oil and resin content, LupuLN2 powder offers up all the flavor and aroma of a heavily hopped beer, but with a significanly reduced grassy character. Additionally, the lower dosage rate of the concentrated powder reduces the volume of trub and therefore, kettle loss. Using Cryo Hops® you will net more beer that is clearer! Typical usage of Cryo Hops® would be roughly 50% of pellets. LupuLN2 powder can be used in any application where traditional hop products are utilized, including: Bittering, Kettle, Whirlpool and even direct to the fermentor.  It is suggested that you use Cryo Hops® as late additions, in the whirlpool or dry hop, as the volatile aromatic compounds will be driven off if added early in the boil. Cryo Hops® are an innovative hop product that is made by separating the lupulin from the hop flower using cryogenic processing. The result is a product with twice the potency of T90 pellets, with reduced astringency and vegetative material. Note: These hops come pelletized. The powder is compressed into pellet form to make handling easier. Typical Hop Statistics: Alpha Acids: 21.0 – 28.0% Beta Acids: 6.0 – 9.0% Total Oil: 2.0 – 5.0%   Simcoe® and Cryo Hops® are registered trademarks owned by Yakima Chief Hops, LLC.

Read more less

Maximize Finished Yield: Reduces beer loss and waste by replacing bulky hop pellets with a highly concentrated liquid extract. Intense Hop Aromatics: Delivers variety-specific, "survivable" hop compounds for a powerful aromatic boost in every batch. Versatile Cold-Side Use: Designed for easy pouring into the fermenter during active or post-fermentation dry hopping and whirlpool additions. Superior Efficiency: Streamlines logistics with a compact footprint and high replacement rates—up to 100:1 compared to T-90 pellets. HyperBoost®, formerly YCH 701, is a concentrated hop oil extract produced through an innovative CO2 supercritical extraction process. Intended to amplify hop aromatics and increase yield, HyperBoost excels at adding beautiful hop aroma anywhere pellets are normally used, including cold-side applications. HyperBoost is made from single-hop varieties to deliver variety-specific aroma boosts to your finished beer. Chief Advantages: Increased efficiency Ease of use Increased aroma Less storage space needed High concentrations of survivable compounds Reduction of waste How to Brew with HyperBoost? HyperBoost® is designed to easily pour in your fermenter as a dry hop addition, adding an intense saturation of hop flavor to your finished beer. Most brewers choose to use HyperBoost during active fermentation, but it can also be added to the whirlpool. Using HyperBoost in place of traditional pellets can increase finished beer yield. Kettle: HyperBoost is not intended for kettle additions. For early kettle and bittering additions, we recommend pellets or CO2 extract. DynaBoost® carries variety-specific oil and alpha acid content to the kettle and can be used as a late kettle addition. Post-Boil / Whirlpool: For whirlpool use, brewers can replace up to 100% of pellets with HyperBoost. We suggest replacing T-90 pellet additions in the whirlpool at a rate of 50:1 by weight (20 g of HyperBoost to replace 1 kg T-90). Your brewery might choose to use more or less depending on beer style or overall goal. Fermentation: HyperBoost can be used as an active or post-fermentation hop addition. Incorporate HyperBoost anywhere in the process you would typically use pellets. Dry Hopping: For dry hop additions, YCH recommends using HyperBoost for 25-50% of the addition and adding T-90 or Cryo® pellets for the remainder of the hop charge. As a dry hop, we suggest starting with a replacement rate of 100:1 HyperBoost to T-90 pellets by weight (10 g HyperBoost in place of 1 kg T-90) to 125:1 (8 g HyperBoost in place of 1 kg T-90).    Simcoe® and HyperBoost® are registered trademarks owned by Yakima Chief Hops, LLC.  

Read more less

Flash Brewing® Kits from MoreBeer!® require only 10 minutes to brew. Just mix and ferment. This hop-forward beer recipe kit is modeled after the highly sought-after Ballast Point Sculpin® IPA Flavored with Simcoe® & Amarillo® Cryo Hops® Estimated ABV: 7% Estimated IBUs: 60 Makes 5 gallons of finished beer Ugly Fish IPA Flash Brewing® KitContrary to its name, Ugly Fish IPA is one of our most beautiful beers! Inspired by the highly sought-after Ballast Point Sculpin® IPA, this beer starts with a very clean, firm bitterness and a light malt base. A beautiful blend of Simcoe® and Amarillo® Cryo Hops® lend enticing West Coast IPA flavors of grapefruit, lemon, pine, and apricot. Flash Brewing® KitsIntroducing MoreBeer!'s Flash Brewing® Kits! Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. This streamlined process not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home. Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing® eliminates the need to boil. Our Flash Brewing® malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets for flavor. Flash Yeast™ starts quickly and consistently produces clean beer that lets the malt and hops shine. The result is a high-quality beer that will absolutely surprise you. If you want to read more about the development of Flash Brewing® at MoreBeer! or have more questions please read our Frequently Asked Questions. Equipment Required for Flash Brewing®Flash Brews can be fermented in any wide mouth 6 or 7-gallon fermenter you already own. We suggest a wide mouth fermenter so you can easily pour in the ingredients. The 7-gallon Fermonster fermenter is a perfect choice. If you are new to brewing and need a fermentation kit, See related product. Includes: Ugly Fish IPA Flash Malt™: 7 lbs Simcoe® Cryo Hops®: 1 oz Amarillo® Cryo Hops®: 1 oz HopBite™: 60 IBU Shot Flash Yeast™ Flash Brewing® Instructions Flash Brewing® recipe kits do not include priming sugar. For bottling, we recommend PopTops™ Swing Top Bottles and Pop Shots Carbonation Tablets. Simcoe® is a registered trademark owned by Yakima Chief Ranches.Amarillo® is a registered trademark owned by Virgil Gamache Farms.Cryo Hops® is a registered trademark owned by Yakima Chief Hops, LLC.  

Read more less

Flash Brewing® Kits from MoreBeer!® require only 10 minutes to brew. Just mix and ferment. This hop-forward beer recipe kit is modeled after the highly sought-after Ballast Point Sculpin® IPA Flavored with Simcoe® & Amarillo® Cryo Hops® Estimated ABV: 7% Estimated IBUs: 60 Makes 2 gallons of finished beer Ugly Fish IPA Flash Brewing® KitContrary to its name, Ugly Fish IPA is one of our most beautiful beers! Inspired by the highly sought-after Ballast Point Sculpin® IPA, this beer starts with a very clean, firm bitterness and a light malt base. A beautiful blend of Simcoe® and Amarillo® Cryo Hops® lend enticing West Coast IPA flavors of grapefruit, lemon, pine, and apricot. Flash Brewing® KitsIntroducing MoreBeer!'s Flash Brewing® Kits! Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. This streamlined process not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home. Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing® eliminates the need to boil. Our Flash Brewing® malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets for flavor. Flash Yeast™ starts quickly and consistently produces clean beer that lets the malt and hops shine. The result is a high-quality beer that will absolutely surprise you. If you want to read more about the development of Flash Brewing® at MoreBeer! or have more questions please read our Frequently Asked Questions. Equipment Required for Flash Brewing®Flash Brews can be fermented in any wide mouth 3-gallon fermenter you already own. We suggest a wide mouth fermenter so you can easily pour in the ingredients. The 3-gallon Fermonster fermenter is a perfect choice. If you are new to brewing and need a fermentation kit, See related product. Includes: Ugly Fish IPA Flash Malt™: 2.8 lbs Simcoe® Cryo Hops®: 0.5 oz Amarillo® Cryo Hops®: 0.5 oz HopBite™: 60 IBU Shot Flash Yeast™ Flash Brewing® Instructions Flash Brewing® recipe kits do not include priming sugar. For bottling, we recommend PopTops™ Swing Top Bottles and Pop Shots Carbonation Tablets. Simcoe® is a registered trademark owned by Yakima Chief Ranches.Amarillo® is a registered trademark owned by Virgil Gamache Farms.Cryo Hops® is a registered trademark owned by Yakima Chief Hops, LLC.  

Read more less

Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory. This Brewmaster Series kit was scaled down to a homebrew batch size in collaboration with Firestone Walker Brewing Company One of the newest takes on the IPA style—Cold IPAs are highly hopped but fermented cold with a lager strain Includes Simcoe®, Callista, Talus®, Mosaic Cryo®, El Dorado, Idaho #7, Cashmere, Nelson, and Riwaka™ hops Estimated ABV: 6.7% Estimated IBUs: 50 Makes 5 gallons of finished beer A new way to IPA! Firestone Walker's Hopnosis IPA represents one of the tastiest examples of a new beer style that is quickly gaining ground—Cold IPA. These beers feature the massive hopping schedules you'd expect from an IPA but are then fermented cold with a lager strain. This gives the beer a clean, crisp and crushable profile while allowing the hops to be on full display.  From the top of the boil to the final post fermentation dry hop, you'll find a long list of delicious hop varieties from the U.S. and New Zealand. One of the standouts is Mosaic® Cryo Hops® which are used as the biotransformation dry hop addition. Prepare to be absolutely mesmerized by Hopnosis IPA's explosion of tropical fruit flavors including mango, passionfruit, white grape, and lychee. What Firestone Walker Has to Say About Hopnosis: In early 2022, we launched Hopnosis as our next-generation West Coast-style IPA. Now the time has come to embrace an even more accurate stylistic moniker for Hopnosis: Cold IPA. While IPAs are typically fermented with ale yeasts, cold IPAs like Hopnosis are fermented with lager yeasts. Remember that IPA stands for India Pale Ale, so fermenting an IPA with lager yeasts signifies a break with tradition. “When you use a lager yeast to ferment an IPA, you get a cleaner and less ester-driven aroma profile,” said Brewmaster Matt Brynildson. “The colder fermentation also creates a lighter backbone that helps accentuate the bright, tropical hops we’re using. So while Hopnosis offers a lot of things you love in a straight-ahead West Coast IPA, the lager yeast is what pushes it toward the Cold IPA style.” As a result, Hopnosis rings all the bells of a Cold IPA: crisp and crushable, with a clean hop profile. Makes 5 gallons Estimated Original Gravity: 1.059-64 SRM (Color Range): 4-5 IBUs: 50 Estimated Original Gravity: 6.7% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.

Read more less