The Vorlauf Arm Assembly is great for recirculating your mash. It fits right into the Ss Brewtech recirculation bulkhead fitting with a 1/2" knurled FPT locking nut. Made from 304 stainless steel.
This pressurized transfer fitting from Ss Brewtech is perfect for pushing beer to kegs. Fits on any 1.5" tri clamp flange. It includes a relief valve right in the fitting that releases at 2-2.5 psi. Made from 304 stainless steel.
This is a dome lid for Ss Brewtech 14 gal Chronicals. It features a 3" tri clamp opening at the top to facilitate dry hopping or cleaning your fermenter in place. Made from 304 stainless steel. Does not include 3" TC gasket and clamp.
This is a dome lid for Ss Brewtech 1/2 bbl Chronicals. It features a 3" tri clamp opening at the top to facilitate dry hopping or cleaning your fermenter in place. Made from 304 stainless steel. Does not include 3" TC gasket and clamp.
Replacement pre-drilled FTSs lid. Included with the the Ss BrewTech FTSs chilling system for the 1/2 bbl Chronical.
Lid only. This does not include the other FTSs components.
This is a 304 stainless steel blow off tube for Ss Brewtech 7 gallon Chronical fermenters. Fits perfectly on the 3" TC dome lids and comes with a relief valve built into the cane. 3" TC gasket and clamp not included.
This is a 304 stainless steel blow off tube for Ss Brewtech 1/2 barrel Chronical fermenters. Fits perfectly on the 3" TC dome lids and comes with a relief valve built into the cane. 3" TC gasket and clamp not included.
This is a dome lid for Ss Brewtech 1/2 bbl Chronicals. It features a 3" tri clamp opening at the top to facilitate dry hopping or cleaning your fermenter in place. Made from 304 stainless steel. Does not include 3" TC gasket and clamp.
This is a 304 stainless steel blow off tube for Ss Brewtech 14 gallon Chronical fermenters. Fits perfectly on the 3" TC dome lids and comes with a built-in relief valve. The two-piece cane has an outer diameter of 15 mm (approx. 9/16") and 3/8" NPT where they connect. 3" TC gasket and clamp not included.
These chiller coil extensions extend the length of the Ss Brewtech FTSs chiller coil for 14 gallon and half barrel Chronical fermenters. Very useful if you brew partial batches and/or there is a cool ambient temperature forcing you to mostly heat your fermenter. Mounts under the lid to drop the coils further down. Made from 304 stainless steel and leak tested.
These chiller coil extensions extend the length of the Ss Brewtech FTSs chiller coil for Brew Bucket and 7 gallon Chronical fermenters. Very useful if you brew partial batches and/or there is a cool ambient temperature forcing you to mostly heat your fermenter. Mounts under the lid to drop the coils further down. Made from 304 stainless steel and leak tested.
Mount your FTSs control unit to the thermowell port of your SS Brewmaster Edition Chronical or Standard Brite Tank!
Features:
Matte Black painted stainless
Mounts on thermowell port
Custom built to fit FTSs digital controllers
Chill your beer in the summer and warm your beer in the winter! Use a chill water source when it's hot or warmed water if it's cold! Temperature control during fermentation is one of the most significant contributors to the flavor of our beers, yet it all too often gets overlooked. This particular unit is designed to work specifically with the Brew Bucket Mini.
Brewers typically have limited the styles of beers they produce to the varying temperatures of the seasons. The system is elegant and engineered, yet it stays true to the heart and soul of us home brewers. The FTSs uses a precision digital temperature controller in combination with a 304 stainless steel immersion chiller. The digital controller constantly monitors your beer’s temperature and will activate the circulation pump (which, by the way, is quieter than a mouse) to hold the fermentation temperature at your predetermined set point. You can crash cool or lager too! You supply the chill water source, which can be as simple as ice water in a cooler or as involved as glycol from a chiller’s reservoir. We supply the rest of the system. As long time fellow home brewers, this is a system we know many of you have been dreaming about for a long time: advanced temperature control for the beers you make at an affordable price.
Features:
Custom lid w/ 304 Ss immersion chiller coil
Pro grade (super quiet) submersible pump
110-240V power supply
304 Ss weldless lid mounted thermowell
Tailored neoprene insulation jacket
Digital temperature controller
Set a temperature on the controller, provide a source of chill water for your system, tuck the heater pad underneath the neoprene jacket, plug into the wall and walk away. This system will hold your set temp both when it gets cold and when it gets warm!
This kit is for owners of the Ss standard edition Chronical 14 Gallon fermenter that are looking for a two-way switchable controller with both heating and chilling functionality.
Kit contents include:
1x heater pad for 14 Gal Chronical
1 x power supply 110-240V and 6A power supply for global use
1 x two-way switchable FTSs controller
1 x flat FTSs lid
1 x chilling coil
1 x lid mounted thermowell
10 feet of vinyl tubing
1 x lid stopper
1 x submersible pump
1 x custom tailored neoprene jacket for Chronical 14 gallon fermenter
Digital temp controller displays both C/F
Chill from 0.5-2 degrees F per minute
Custom lid with 304 Ss immersion chiller coil
304 Ss weldless lid mounted thermowell
Accurately monitor and control temps
Chill your beer in the summer and warm your beer in the winter! Use a chill water source when it's hot or warmed water if it's cold! Temperature control during fermentation is one of the most significant contributors to the flavor of our beers, yet it all too often gets overlooked. This particular unit is designed to work specifically with the 14 Gallon Chronical Fermentor.
Brewers typically have limited the styles of beers they produce to the varying temperatures of the seasons. The system is elegant and engineered, yet it stays true to the heart and soul of us home brewers. The FTSs uses a precision digital temperature controller in combination with a 304 stainless steel immersion chiller. The digital controller constantly monitors your beer’s temperature and will activate the circulation pump (which, by the way, is quieter than a mouse) to hold the fermentation temperature at your predetermined set point. You can crash cool or lager too! You supply the chill water source, which can be as simple as ice water in a cooler or as involved as glycol from a chiller’s reservoir. We supply the rest of the system. As long time fellow home brewers, this is a system we know many of you have been dreaming about for a long time: advanced temperature control for the beers you make at an affordable price.
Features:
Custom lid w/ 304 Ss immersion chiller coil
Pro grade (super quiet) submersible pump
110-240V power supply
304 Ss weldless lid mounted thermowell
Tailored neoprene insulation jacket
Digital temperature controller
Set a temperature on the controller, provide a source of chill water for your system, tuck the heater pad underneath the neoprene jacket, plug into the wall and walk away. This system will hold your set temp both when it gets cold and when it gets warm!
This kit is for owners of the Ss standard edition Chronical Half Barrel fermenter that are looking for a two-way switchable controller with both heating and chilling functionality.
Kit contents include:
1x heater pad for Half BBL Chronical
1 x power supply 110-240V and 6A power supply for global use
1 x two-way switchable FTSs controller
1 x flat FTSs lid
1 x chilling coil
1 x lid mounted thermowell
10 feet of vinyl tubing
1 x lid stopper
1 x submersible pump
1 x custom tailored neoprene jacket for Chronical Half BBL fermenter
Digital temp controller displays both C/F
Chill from 0.5-2 degrees F per minute
Custom lid with 304 Ss immersion chiller coil
304 Ss weldless lid mounted thermowell
Accurately monitor and control temps
Used along with the Ss recirculation bulkhead, this fitting adds a 3/8" hose barb on your mash tun. It attaches with a 1/2" FPT knurled locking nut and is required if you are using the Ss recirculation manifold. Made from 304 stainless steel and silicone O-rings included.
Pro-style blow-off to replace commonly used airlocks and silicone tubing. Sized for the 1 BBL Chronical BME.
304 Stainless steel
Direct fit for Chronical 2.0 and legacy Chronical BME
Can work on other fermenters with the addition of a 3" TC Domed Lid
Pressure relief valve included
3" TC Gasket and 3" TC Clamp not included
*The 7 gal version is a single piece. 14 gal, 17 gal, and 1BBL versions are two-piece designs.
If you bought a 3" TC dome lid for your standard Chronical this covers up that large 3" tri clamp opening. 1/2" tubing or an airlock and #2 stopper fit nicely in the 17mm hole. This cap comes standard with Brewmaster Chronicals and only fits on a 3" tri clamp flange. Comes with a 1/2" hose barb and pressure relief valve. 3" tri clamp gasket and clamp not included.
This bushing from Ss Brewtech fits in with a 3/4" MPT and shrinks it to a more common 1/2" FPT. Great for your Chronical 3/4" dump valve. Made from 304 stainless steel.
Chill your beer in the summer and warm your beer in the winter! Temperature control during fermentation is one of the keys to making world class beer at home. It can be difficult to achieve however, often requiring you to have a temperature controlled refrigerator dedicated to fermentation. Now with the FTSs temperature control package and either a Brew Bucket or Chronical, you can maintain perfect fermenting temps all year. This particular unit is designed to work specifically with the 14 gallon Brewmaster Edition Brew Bucket.
The system is elegant and engineered to be as compact and affordable as possible. The FTSs uses a precision digital temperature controller in combination with a 304 stainless steel immersion chiller. The digital controller constantly monitors your beer’s temperature and will activate the very quiet circulation pump to hold the fermentation temperature at your predetermined set point. You can cold crash or lager too! You supply the chill water source, which can be as simple as ice water in a cooler or as involved as glycol from a chiller’s reservoir. We supply the rest of the system. As long time fellow home brewers, this is a system we know many of you have been dreaming about for a long time: advanced temperature control for the beers you make at an affordable price.
Components:
Custom lid w/ 304 SS immersion chiller coil
Pro grade (super quiet) submersible pump
110-240 v power supply
304 SS weldless lid mounted thermowell
Tailored neoprene insulation jacket
Digital temperature controller
Included vinyl tubing
Required from you:
Any type of cooler where you will add water and ice, or frozen jugs, to cool. You will submerse the included pump in the water.
To heat you can use a simple aquarium heater to raise the temperature of the water in the cooler
A 14 gallon Brewmaster Edition Brew Bucket, FE804
Please Note: This Product is an add on for a 14 gallon Brewmaster Brew Bucket, and DOES NOT INCLUDE the brew bucket itself.
Add a 1.5" TC flange to virtually any vessel! Weldless design Ideal for FTSs and Brew Bucket flat lid pressurized transfers Use with the Pressurized Transfer Fitting FE26 (as shown in pictures) 304 Stainless Construction High heat compatible silicone O-ring Requires TC Clamp and Gasket 42 mm carbide hole saw recommended for installation Please note this product only includes the three pieces displayed in the first photo.
This is a 1.5 in. TC sight gauge. It's small compact design makes it easy to put inline anywhere during the brewing process. Made from 304 stainless steel and breaks down for easy cleaning. 2.2 in. long.
The ultimate control & precision of your fermentation process. Equipped with four built-in temperature controllers and pumps, this advanced chiller enables you to independently regulate the temperature of multiple separate fermentation vessels simultaneously, ensuring optimal conditions for different batches or styles of beer, making it a game-changer for homebrewers.
4 Built-in pumps and digital controllers
Control multiple fermentation temperatures independently Fill with 20% glycol solution for optimal chilling performance Cold crash with good insulation Perfect complement to BrewBuilt X-Series Conicals The IceMaster Max 4 is designed to cool fermentations in small vessels. It features 4 built-in submersible pumps with independent digital temperature controllers and can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. Each controller includes a temperature probe that should be inserted into a thermowell in your vessel or can be taped to the outside of the vessel if you don't have a thermowell. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to four tanks can be controlled separately with one IceMaster Max 4. Compatibility The IceMaster can be used with any fermenter that has a built-in cooling jacket, added CoolStix, or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters. BrewBuilt Jacketed Uni Conical - we recommend one Insulated Tubing Kit for each tank. These kits feature "dry break" quick disconnects that prevent glycol loss and the insulated tubing will increase chilling efficiency and eliminate line sweating from condensation. CoolStix - CoolStix can be added to a wide range of carboys, fermenters, and tanks and the IceMaster works really well in combination. Each CoolStix is available with or without a pump kit; for use with the IceMaster Max 4 you will only need the CoolStix and some tubing to connect it to the chiller. Ss Brewtech Fermenters and Brites - Ss BME Chronicals, BME Brites, and Unitanks come with cooling coils and neoprene as standard. The optional chilling FTSs will not be needed for use with the Max 4. The cooling coil for standard Ss Chronicals and Brew Buckets are not sold a la carte and must be purchased with a submersible pump, which is not needed for the Max 4. For standard Chronicals and Brew Buckets you might consider the IceMaster 100 for cost savings. Spike Conical with Optional Cooling Coil - the cooling coil for Spike CF series conicals is available for purchase independently from the TC-100 cooling system. For use with the Max 4 you will only need the coil and some tubing to connect it to the chiller. Speidel Tanks with Optional Cooling Jackets - You will need two lengths of tubing to connect the chiller to each tank. Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need two lengths of tubing for each fermenter. Blichmann Fermenators with Optional Cooling Coil - You will need two lengths of tubing for each Fermenator. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75°F ambient and neoprene insulation. Neoprene provides a modest amount of insulation so you would obtain better results using Armaflex or a higher R rated insulation. Capacity calculated at cold crashing to a target temperature of 38°F while the ambient temperature is 75°F with neoprene insulation (double tank capacity for ale fermentation temperature control): 2 - 1BBL (31 Gallon) Jacketed Tank 2 - 1/2BBL (15-20 Gallon) Tanks 3 - 10-14 Gallon Tanks 4 - 5-7 Gallon Tanks Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 2 lengths of tubing per vessel. All tubing connections should be secured with hose clamps. Length 1: Barb of 1st bulkhead (IN) to cooling system outlet
Length 2: Barb of 2nd bulkhead (OUT) to cooling system inlet
Specifications: 4 built-in submersible pumps with independent digital controllers Pump controllers read in °F/°C Temperature controller reads in °C Labeled IN and OUT stainless bulkheads with 3/8" OD barbs Tank Capacity: 30L/8 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 780 Watt/2600btu/0.26 ton Refrigerant: R134a Voltage: 110V (3.6 amps) Dimensions: 16.1" x 16.1" x 26" Wheels included CE Certified Max Head: 21.3 ft (6.5 m) Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.
The ultimate control & precision of your fermentation process. Equipped with two built-in temperature controllers and pumps, this advanced chiller enables you to independently regulate the temperature of two separate fermentation vessels simultaneously, ensuring optimal conditions for different batches or styles of beer, making it a game-changer for homebrewers.
2 built-in submersible pumps with independent digital controllers
Control multiple fermentation temperatures independently
Fill with 20% glycol solution for optimal chilling performance
Cold crash with good insulation
Perfect complement to BrewBuilt X-Series Conicals
The IceMaster Max 2 is designed to cool fermentations in small vessels. It features 2 built-in submersible pumps with independent digital temperature controllers and can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. Each controller includes a temperature probe that should be inserted into a thermowell in your vessel or can be taped to the outside of the vessel if you don't have a thermowell. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to two tanks can be controlled separately with one IceMaster Max 2.
The Max 2 is the perfect unit for brewers with 1 or 2 fermentation vessels. The IceMaster 100 and IceMaster Max 4 are terrific chillers, but for they have far more cooling capacity than the average homebrewer needs. The Max 2 is the most affordable glycol chiller we offer, and thanks to the built-in submersible pumps and controllers, there's no need to purchase additional pump kits to use with your cooling system(s).
Compatibility
The IceMaster can be used with any fermenter that has a built-in cooling jacket, added CoolStix, or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters.
BrewBuilt Jacketed Uni Conical - we recommend one Insulated Tubing Kit for each tank. These kits feature "dry break" quick disconnects that prevent glycol loss and the insulated tubing will increase chilling efficiency and eliminate line sweating from condensation.
CoolStix - CoolStix can be added to a wide range of carboys, fermenters, and tanks and the IceMaster works really well in combination. Each CoolStix is available with or without a pump kit; for use with the IceMaster Max 2 you will only need the CoolStix and some tubing to connect it to the chiller.
Ss Brewtech Fermenters and Brites - Ss BME Chronicals, BME Brites, and Unitanks come with cooling coils and neoprene as standard. The optional chilling FTSs will not be needed for use with the Max 2.
Spike Conical with Optional Cooling Coil - the cooling coil for Spike CF series conicals is available for purchase independently from the TC-100 cooling system. For use with the Max 2 you will only need the coil and some tubing to connect it to the chiller.
Speidel Tanks with Optional Cooling Jackets - You will need two lengths of tubing to connect the chiller to each tank.
Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need two lengths of tubing for each fermenter.
Blichmann Fermenators with Optional Cooling Coil - You will need two lengths of tubing for each Fermenator.
Capacity
It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75°F ambient and neoprene insulation. Neoprene provides a modest amount of insulation so you would obtain better results using Armaflex or a higher R rated insulation.
At 75°F ambient temperature with neoprene insulation, the Max 2 can cold crash one 1 BBL BrewBuilt Jacketed Uni or two Jacketed Unis up to 15 gallons in size at one time to 38°F.
Set Up
In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 2 lengths of tubing per vessel. All tubing connections should be secured with hose clamps. The unit comes with JoinTech Male Quick Disconnects installed as the inlet/outlet bulkheads, and also includes Female QDs with barbs to connect your tubing to the bulkheads. QDs to connect tubing to your cooling system are not included as the connection type depends on your setup.
Length 1: 1st bulkhead (IN) to cooling system outlet
Length 2: 2nd bulkhead (OUT) to cooling system inlet
Specifications:
2 built-in submersible pumps with independent digital controllers
Pump controller reads in °F / °C
Temperature controller reads in °C
Labeled IN and OUT bulkheads with Male QD JoinTech Dry Break Quick Disconnects
(4) Female QD JoinTech Dry Break Quick Disconnect w/ 1/2" Barb included
Tank Capacity: 17 L / 4.5 Gal. Water Capacity
Compressor: 3/8 HP
Cooling Capacity: 500 Watt/1700btu/0.14 tons
Refrigerant: R600a
Voltage: 110V
Dimensions: 19" x 12" x 17.5"
Wheels not included
CE Certified
Note: The sight glass attaches to the front of the unit by threading the elbow fitting to the bottom threaded drain port, and attaching the other end to the upper mount. Note that the top of the sight glass is open to allow overflow to drain out if the reservoir is overfilled.
Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.
Control your fermentation temperatures with Cool Brewing's simple, yet innovative, insulated fermentation bag. This is the 2nd generation Cool Brew bag, which has made cold fermentations even easier! Fermenting your homebrew at the right temperature is one of the critical factors in making good beer. Let the temperature get too warm, and your beer will taste 'rough' as the soft malt and vibrant hop flavors dissapear! Typically an advanced homebrewer would want to get a spare refrigerator or even a MoreBeer! Cooled Conical to control fermentation temperatures, both those options either take up a lot of space or can cost a fair amount of money. The Cool Brewing Bag allows the apartment brewer, those who have space constraints, or the brewer on a budget a great option to control fermentation temperature and make great beer. Cool Brewing's Fermentation Cooler is designed specifically to accommodate standard 6.5, 6 or 5 gallon fermenter. You freeze a 2 liter soda bottle with water, or similar, and place in the fermentation bag with your fermenting carboy. Also works great with the Ss BrewTech Brew Buckets! The typical desired ale fermentation range is on average around 62-72° F. For a typical 5 gallon batch (1) frozen 2-liter bottle should lower wort temperature around 5 degrees, while using (2) 2-liter bottles will lower wort temperature around 11 degrees for 24-36 hours. Of course your exact results might vary but you can adjust the amount of ice you use as you go. The manufacturer has found they can cool the wort temperature up to around a 30-35° drop from ambient room temperature. On the flipside, add a Fermwrap and temperature controller to the setup, and you've got a heated fermentation temperature accurate to within 1° F! The Cool Brewing Fermentation Cooler is sealed, insulated and 100% waterproof so it will efficiently and neatly keep your temperatures in check. When you’re done, the Cool Brewing Fermentation Cooler easily folds up for storage until the next brew day! Cool Brew Features: Up to twice as efficient and cleaner then homemade swamp coolers
Much less expensive than custom kegorator or keezer set up's that cost $100's of dollars.
Cool Brewing Cooler will work with multiple sized fermenters.
100% waterproof so will not leave condensation.
It folds up for easy storage when not in use or travel.
Will work great in condos and warm climates where you need a swamp cooler even for Ale’s!
Contains the mess of any fermentation blowouts
Inner dimensions: 20.5"D x 25.5"H
The ultimate control & precision of your fermentation process. Equipped with four built-in temperature controllers and pumps, this advanced chiller enables you to independently regulate the temperature of multiple separate fermentation vessels simultaneously, ensuring optimal conditions for different batches or styles of beer, making it a game-changer for homebrewers.
4 Built-in pumps and digital controllers
Control multiple fermentation temperatures independently Fill with 20% glycol solution for optimal chilling performance Cold crash with good insulation Perfect complement to BrewBuilt X-Series Conicals The IceMaster Max 4 is designed to cool fermentations in small vessels. It features 4 built-in submersible pumps with independent digital temperature controllers and can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. Each controller includes a temperature probe that should be inserted into a thermowell in your vessel or can be taped to the outside of the vessel if you don't have a thermowell. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to four tanks can be controlled separately with one IceMaster Max 4. Compatibility The IceMaster can be used with any fermenter that has a built-in cooling jacket, added CoolStix, or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters. BrewBuilt Jacketed Uni Conical - we recommend one Insulated Tubing Kit for each tank. These kits feature "dry break" quick disconnects that prevent glycol loss and the insulated tubing will increase chilling efficiency and eliminate line sweating from condensation. CoolStix - CoolStix can be added to a wide range of carboys, fermenters, and tanks and the IceMaster works really well in combination. Each CoolStix is available with or without a pump kit; for use with the IceMaster Max 4 you will only need the CoolStix and some tubing to connect it to the chiller. Ss Brewtech Fermenters and Brites - Ss BME Chronicals, BME Brites, and Unitanks come with cooling coils and neoprene as standard. The optional chilling FTSs will not be needed for use with the Max 4. The cooling coil for standard Ss Chronicals and Brew Buckets are not sold a la carte and must be purchased with a submersible pump, which is not needed for the Max 4. For standard Chronicals and Brew Buckets you might consider the IceMaster 100 for cost savings. Spike Conical with Optional Cooling Coil - the cooling coil for Spike CF series conicals is available for purchase independently from the TC-100 cooling system. For use with the Max 4 you will only need the coil and some tubing to connect it to the chiller. Speidel Tanks with Optional Cooling Jackets - You will need two lengths of tubing to connect the chiller to each tank. Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need two lengths of tubing for each fermenter. Blichmann Fermenators with Optional Cooling Coil - You will need two lengths of tubing for each Fermenator. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75°F ambient and neoprene insulation. Neoprene provides a modest amount of insulation so you would obtain better results using Armaflex or a higher R rated insulation. Capacity calculated at cold crashing to a target temperature of 38°F while the ambient temperature is 75°F with neoprene insulation (double tank capacity for ale fermentation temperature control): 2 - 1BBL (31 Gallon) Jacketed Tank 2 - 1/2BBL (15-20 Gallon) Tanks 3 - 10-14 Gallon Tanks 4 - 5-7 Gallon Tanks Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 2 lengths of tubing per vessel. All tubing connections should be secured with hose clamps. Length 1: Barb of 1st bulkhead (IN) to cooling system outlet
Length 2: Barb of 2nd bulkhead (OUT) to cooling system inlet
Specifications: 4 built-in submersible pumps with independent digital controllers Pump controllers read in °F/°C Temperature controller reads in °C Labeled IN and OUT stainless bulkheads with 3/8" OD barbs Tank Capacity: 30L/8 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 780 Watt/2600btu/0.26 ton Refrigerant: R134a Voltage: 110V (3.6 amps) Dimensions: 16.1" x 16.1" x 26" Wheels included CE Certified Max Head: 21.3 ft (6.5 m) Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.
The ultimate control & precision of your fermentation process. Equipped with four built-in temperature controllers and pumps, this advanced chiller enables you to independently regulate the temperature of multiple separate fermentation vessels simultaneously, ensuring optimal conditions for different batches or styles of beer, making it a game-changer for homebrewers.
4 Built-in pumps and digital controllers
Control multiple fermentation temperatures independently Fill with 20% glycol solution for optimal chilling performance Cold crash with good insulation Perfect complement to BrewBuilt X-Series Conicals The IceMaster Max 4 is designed to cool fermentations in small vessels. It features 4 built-in submersible pumps with independent digital temperature controllers and can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. Each controller includes a temperature probe that should be inserted into a thermowell in your vessel or can be taped to the outside of the vessel if you don't have a thermowell. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to four tanks can be controlled separately with one IceMaster Max 4. Compatibility The IceMaster can be used with any fermenter that has a built-in cooling jacket, added CoolStix, or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters. BrewBuilt Jacketed Uni Conical - we recommend one Insulated Tubing Kit for each tank. These kits feature "dry break" quick disconnects that prevent glycol loss and the insulated tubing will increase chilling efficiency and eliminate line sweating from condensation. CoolStix - CoolStix can be added to a wide range of carboys, fermenters, and tanks and the IceMaster works really well in combination. Each CoolStix is available with or without a pump kit; for use with the IceMaster Max 4 you will only need the CoolStix and some tubing to connect it to the chiller. Ss Brewtech Fermenters and Brites - Ss BME Chronicals, BME Brites, and Unitanks come with cooling coils and neoprene as standard. The optional chilling FTSs will not be needed for use with the Max 4. The cooling coil for standard Ss Chronicals and Brew Buckets are not sold a la carte and must be purchased with a submersible pump, which is not needed for the Max 4. For standard Chronicals and Brew Buckets you might consider the IceMaster 100 for cost savings. Spike Conical with Optional Cooling Coil - the cooling coil for Spike CF series conicals is available for purchase independently from the TC-100 cooling system. For use with the Max 4 you will only need the coil and some tubing to connect it to the chiller. Speidel Tanks with Optional Cooling Jackets - You will need two lengths of tubing to connect the chiller to each tank. Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need two lengths of tubing for each fermenter. Blichmann Fermenators with Optional Cooling Coil - You will need two lengths of tubing for each Fermenator. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75°F ambient and neoprene insulation. Neoprene provides a modest amount of insulation so you would obtain better results using Armaflex or a higher R rated insulation. Capacity calculated at cold crashing to a target temperature of 38°F while the ambient temperature is 75°F with neoprene insulation (double tank capacity for ale fermentation temperature control): 2 - 1BBL (31 Gallon) Jacketed Tank 2 - 1/2BBL (15-20 Gallon) Tanks 3 - 10-14 Gallon Tanks 4 - 5-7 Gallon Tanks Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 2 lengths of tubing per vessel. All tubing connections should be secured with hose clamps. Length 1: Barb of 1st bulkhead (IN) to cooling system outlet
Length 2: Barb of 2nd bulkhead (OUT) to cooling system inlet
Specifications: 4 built-in submersible pumps with independent digital controllers Pump controllers read in °F/°C Temperature controller reads in °C Labeled IN and OUT stainless bulkheads with 3/8" OD barbs Tank Capacity: 30L/8 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 780 Watt/2600btu/0.26 ton Refrigerant: R134a Voltage: 110V (3.6 amps) Dimensions: 16.1" x 16.1" x 26" Wheels included CE Certified Max Head: 21.3 ft (6.5 m) Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.
The ultimate control & precision of your fermentation process. Equipped with four built-in temperature controllers and pumps, this advanced chiller enables you to independently regulate the temperature of multiple separate fermentation vessels simultaneously, ensuring optimal conditions for different batches or styles of beer, making it a game-changer for homebrewers.
4 Built-in pumps and digital controllers
Control multiple fermentation temperatures independently Fill with 20% glycol solution for optimal chilling performance Cold crash with good insulation Perfect complement to BrewBuilt X-Series Conicals The IceMaster Max 4 is designed to cool fermentations in small vessels. It features 4 built-in submersible pumps with independent digital temperature controllers and can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. Each controller includes a temperature probe that should be inserted into a thermowell in your vessel or can be taped to the outside of the vessel if you don't have a thermowell. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to four tanks can be controlled separately with one IceMaster Max 4. Compatibility The IceMaster can be used with any fermenter that has a built-in cooling jacket, added CoolStix, or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters. BrewBuilt Jacketed Uni Conical - we recommend one Insulated Tubing Kit for each tank. These kits feature "dry break" quick disconnects that prevent glycol loss and the insulated tubing will increase chilling efficiency and eliminate line sweating from condensation. CoolStix - CoolStix can be added to a wide range of carboys, fermenters, and tanks and the IceMaster works really well in combination. Each CoolStix is available with or without a pump kit; for use with the IceMaster Max 4 you will only need the CoolStix and some tubing to connect it to the chiller. Ss Brewtech Fermenters and Brites - Ss BME Chronicals, BME Brites, and Unitanks come with cooling coils and neoprene as standard. The optional chilling FTSs will not be needed for use with the Max 4. The cooling coil for standard Ss Chronicals and Brew Buckets are not sold a la carte and must be purchased with a submersible pump, which is not needed for the Max 4. For standard Chronicals and Brew Buckets you might consider the IceMaster 100 for cost savings. Spike Conical with Optional Cooling Coil - the cooling coil for Spike CF series conicals is available for purchase independently from the TC-100 cooling system. For use with the Max 4 you will only need the coil and some tubing to connect it to the chiller. Speidel Tanks with Optional Cooling Jackets - You will need two lengths of tubing to connect the chiller to each tank. Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need two lengths of tubing for each fermenter. Blichmann Fermenators with Optional Cooling Coil - You will need two lengths of tubing for each Fermenator. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75°F ambient and neoprene insulation. Neoprene provides a modest amount of insulation so you would obtain better results using Armaflex or a higher R rated insulation. Capacity calculated at cold crashing to a target temperature of 38°F while the ambient temperature is 75°F with neoprene insulation (double tank capacity for ale fermentation temperature control): 2 - 1BBL (31 Gallon) Jacketed Tank 2 - 1/2BBL (15-20 Gallon) Tanks 3 - 10-14 Gallon Tanks 4 - 5-7 Gallon Tanks Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 2 lengths of tubing per vessel. All tubing connections should be secured with hose clamps. Length 1: Barb of 1st bulkhead (IN) to cooling system outlet
Length 2: Barb of 2nd bulkhead (OUT) to cooling system inlet
Specifications: 4 built-in submersible pumps with independent digital controllers Pump controllers read in °F/°C Temperature controller reads in °C Labeled IN and OUT stainless bulkheads with 3/8" OD barbs Tank Capacity: 30L/8 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 780 Watt/2600btu/0.26 ton Refrigerant: R134a Voltage: 110V (3.6 amps) Dimensions: 16.1" x 16.1" x 26" Wheels included CE Certified Max Head: 21.3 ft (6.5 m) Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.
The IceMaster 100 is a powerful and efficient glycol system that provides precise temperature control of multiple Fermenters, but allows you to expand your capacity as needed!
Temp Control & Cold Crash up to 4 - 5-7 Gallon Jacketed Tanks!
Tank Capacity: 30L/8 Gal. Water Capacity
Cooling Capacity: 780 Watt/2600btu/0.26 ton
Power: 110V (3.6 amps)
The IceMaster 100 is designed to cool fermentations in small vessels. It can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. For each vessel you want to cool you will need to buy one of our BrewBuilt Chilling Pump Kits. Each tank is able to be separately temperature controlled. Each Glycol Pump Kit includes a submersible pump that is placed in the cool bath of this chiller along with a digital controller. The digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don't have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to four tanks can be controlled separately with one IceMaster and four BrewBuilt Chilling Pump Kit (GLY35).
Compatibility
The IceMaster can be used with any fermenter that has a built in cooling jacket, added Coolstix, or a submersed cooling coil. It works well as the cooling source for the following sytems and fermenters.
BrewBuilt Jacketed Uni Conical - You will need one Glycol Pump Kit for each tank.
Coolstix - Coolstix can be added to a wide range of carboys, fermenters, and tanks and the IceMaster works really well in combination. Each Coostix Complete Kit comes with a pump kit and controller.
Ss Brewtech Fermenters and Brites with optional FTS Temperature Control Systems - Because FTS systems include a pump and controller you will not need to buy a separate Glycol Pump Kit.
Spike Conical with Optional Cooling Package - Because the optional Spike cooling system includes a pump and controller you will not need to buy a separate Glycol Pump Kit.
Speidel Tanks with Optional Cooling Jackets - You will need one Glycol Pump Kit for each tank.
Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need one Glycol Pump Kit for each fermenter
Blichmann Fermenators with Optional Cooling Coil - You will need one Glycol Pump Kit for each Fermenator.
Capacity
It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75°F ambient and neoprene insulation. Neoprene a modest amount of insulation so you would obtain better results using Armaflex or a higher R rated insulation. If only controlling fermentation temps the capacity would be higher. Four BrewBuilt Chilling Pump Kits (GLY35) is the maximum that will fit in the IceMaster. We are working on smaller glycol pump kits, where the pumps have smaller footprints, so the IceMaster right now has the capacity to use 5 pumps through the bulkhead fittings.
Capacity calculated at cold crashing to 38°F at 75°F ambient with neoprene insulation (double for fermentation temperature control):
2 - 1BBL (31 Gallon) Jacketed Tanks
2 - 1/2BBL (15-20 Gallon) Tanks
3 - 10-14 Gallon Tanks
4 - 5-7 Gallon Tanks
Set Up
In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 4 lengths of tubing. All tubing connections should be secured with hose clamps.
Length 1: Submersible pump outlet to inner barb of 1st bulkhead
Length 2: Outer barb of 1st bulkhead to cooling system inlet
Length 3: Cooling system outlet to outer barb of 2nd bulkhead
Length 4: Inner barb of 2nd bulkhead to IceMaster resevoir (should drain freely, no connection necessary)
Specifications:
Tank Capacity: 30L/8 Gal. Water Capacity
Compressor: 3/8 HP
Cooling Capacity: 780 Watt/2600btu/0.26 ton
Refrigerant: r134a
Voltage: 110V (3.6 amps)
Dimensions: 410mm x 410mm x 660mm
Includes 10 stainless bulkheads with 3/8" OD barbs
Wheels included
CE Certified
Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.
The German made 1.2 horse power MB Chiller is an ideal solution for nano breweries looking to chill up to 10 fermenters at once. The idea of the MiniChilly is that for each fermenter you want to a chill a pump kit is added. A pump kit (GLY35) includes a submersible pump that is placed in the cold bath of the Mini Chilly along with a digital controller that is placed next to your fermenter. Silicone tubing is included to make the connections. The digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don't have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool the liquid in your vessel to the desired set temperature. In this way each tank can be set at different temperatures. The MiniChilly is made by Quantor/Kreyer of Germany who is the largest manufacturer of glycol systems for breweries and wineries in the world. Made with high quality manufacturing and components, the MiniChilly is a durable system for many years of problem-free brewing. It is German made and we guarantee you will appreciate the build quality when compared to other chillers on the market. The unit features a stainless steel case with stainless 3/8" barbs in the top that allow for a clean connection of the silicone tubing that will run from each pump to each tank. The MiniChilly is able to chill its reservoir down to 21°F when a 30% glycol solution is used. The compact size and included casters make it easy to move around the brewery when needed. Applications: Cooling of Fermentation Cold Crashing for Brite Tanks Maintain Lagering Temperatures Compatibility: The MiniChilly can be used with any fermenter that has a built-in cooling jacket or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters. BrewBuilt Jacketed Uni Conical - You will need one Glycol Pump Kit for each tank. Ss Brewtech Fermenters and Brites with optional FTS Temperature Control Systems: Because FTS systems include a pump and controller you will not need to buy a separate Glycol Pump Kit. Spike Conical with Optional Cooling Package - Because the optional Spike cooling system includes a pump and controller you will not need to buy a separate Glycol Pump Kit. Speidel Tanks with Optional Cooling Jackets - You will need one Glycol Pump Kit for each tank. Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need one Glycol Pump Kit for each fermenter Blichmann Fermenators with Optional Cooling Coil - You will need one Glycol Pump Kit for each Fermenator. Capacity: Many chiller ratings are based on the theoretical power of the compressor, while the cooling capacity of the MiniChilly is rated at a realistic ambient temperature. This is much more useful for predicting the MiniChilly’s performance in real world applications. Of course, you could cool a greater number of smaller tanks but you’re ultimately limited to the 10 connections. Actual cooling capacities will vary based on the insulation of the tank. For the examples below we assume neoprene or better. Cooling Capacity Example: Up to 10 1BBL (31 Gallon) well-insulated tanks fermenting at 68°F in 80°F ambient temperature. For every fermenter you want to cold crash remove 4 fermenting fermenters from the capacity. Set Up: In order to hook up the MiniChilly to your fermenter or tank's cooling system, you will need 4 lengths of tubing per pump. All tubing connections should be secured with hose clamps. Length 1: Submersible pump outlet to inner barb of 1st bulkhead Length 2: Outer barb of 1st bulkhead to cooling system inlet Length 3: Cooling system outlet to outer barb of 2nd bulkhead Length 4: Inner barb of 2nd bulkhead to MiniChilly reservoir (should drain freely, no connection necessary) Technical Characteristics:
Power: 110V-1Ph/50-60Hz Compressor Power: 1.2hp/900watts Cooling Capacity at 32°F glycol temp and 90°F Ambient Temp: 1.05 KW/1050 Watts (60Hz 110V) Cooling Capacity at 60°F glycol temp and 90°F Ambient Temp: 1.92 KW/1920 Watts (60Hz 110V) Stainless Steel Unit Water Temperature Range: 21°F - 86°F (-6°C - 30°C) Ambient Temperature Range: 50°F - 90°F (10°C - 32°C) Refrigerant R134a Free Glycol Water-Bath for Mini-Pumps Fittings 3/8" for Plastic Tubes of Individual Pumps Solid Wheels w/ Breaks for Easy Mobility Universal C19 Plug On/Off Switch Water-Level Sight-Tube Grooves for Individual Pump Cables Safety Inner Separation Water Side from Electric Side Tank Capacity: 12.68 gal. (48 L) Dimensions: 29.5"L x 15.75"W x 21.75"H Weight: 112.5 lbs Made in Germany CE Certified
