304 cast stainless steel ball lock quick disconnect made for high-durability
White ring above the outer bushing to identify the QD for gas use
Compatible with all ball lock style homebrew kegs
1/4" barb connection
This is Ball Lock Quick Disconnect is constructed from stainless steel for lifetime longevity. 1/4" barb.
This QD is for the Gas In side.
2-1/8" H
Please note: the outer bushing on the disconnect is made from chrome-plated brass. All parts that come into contact with liquid are stainless.
Kegland Part Number: KL02981
304 cast stainless steel ball lock quick disconnect made for high-durability White ring above the outer bushing to identify the QD for gas use Compatible with all ball lock style homebrew kegs 1/4" flare thread connection This is a ball-lock type quick disconnect that is constructed from stainless steel for lifetime longevity. This product is for the White Gas In connection, for the Black Beverage Out connection, see our KEG732. 2 1/8" H Please note: the outer bushing on the disconnect is made from chrome-plated brass. All parts that come into contact with liquid are stainless. Kegland Part Number: KL03001
This stainless steel ball lock cap features soda bottle threads, allowing you to convert a 1 or 2 liter soda bottle into a convenient travel growler. The ball lock is compatible with both gas and beverage disconnects, so you can charge the PET bottle before you leave the house and dispense on the go. Attach 3/16" or 1/4" ID tubing to the barb to serve as your dip tube and you're all set! These caps also work great for quickly and conveniently cleaning your draft lines. Mix up a small batch of line cleaning solution in a soda bottle, attach the ball lock cap, and then connect it to your beverage line. Place a bucket below your tap to catch the cleaning solution and open your faucet. Then simply turn the bottle upside down and squeeze it to push solution through your line and out the faucet. You can also choose to pressurize the bottle first, but squeezing the solution through is just as effective. Fermenting with the FermZilla? This is the same ball lock fitting included with the FermZilla Pressure Kit and it's also compatible with the FermZilla Collection Container. If you use the collection container to add dry hops, attach one of these caps and you'll be able purge the container of oxygen before opening the dump valve to introduce the hops. Attach some tubing and diffusion stone and you can oxygenate your wort through the collection container as well! Features: Liquid and Gas Ball Lock Compatible Disassembles for Easy Cleaning Made from Stainless Steel 28mm PCO 1881 Threads Please note: The threaded section of the bottleneck must be at least 1/2" long to form a seal. These caps are not compatible with the KegLand 500mL PET Bottles. Kegland Part Number: KL00826
Heavy-duty ball lock quick disconnect made from 304 stainless steel for lifetime longevity Etched "In" label to clearly identify the QD for beverage use Pairs perfectly with stainless steel Torpedo Kegs and compatible with all ball lock corny kegs 1/4" barb connection Your Kegs are made out of stainless steel, why settle for plastic Quick Disconnects? Upgrade your serving setup to fully Stainless with a pair of Torpedo Ball Lock QDs! These hefty pieces are constructed of 304 SS, designed for lifetime longevity. Printed clearly with "In" and "Out" so even after a few they're easy to work with. Available for both Beer Out and Gas In, with either Barbed or Flared connections. See YMAN's below for the appropriate connectors! Perfect with our Torpedo Kegs, these will work with any Ball Lock Corny Keg. Features: 304 SS Construction - Built to last a lifetime 1/4" Barb connection Clearly Labeled Ball Lock Gas In 2" Height
Made by MoreBeer! from 304 stainless steel.
This quick disconnect seals up very well without a lot of work in connecting them. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2" Barb on the ends for easy connectivity to any 1/2" tubing you may have.
The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 3/8" ID. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off.
We designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why MoreBeer! Stainless QD fittings have a near unanimous 5 star review.
Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.
Quickly and easily connect and disconnect your brew tubing from kettles, pumps and fermenters without fiddling with hose clamps or trying to muscle the tubing on and off of barbed fittings!
There’s no need to put in a lot of work connecting when using this MPT Stainless Steel Male Quick Disconnect with the female QD, as they seal-up quickly. This part works well with any of our H503 and H507 series of quick disconnects, but should only be used with other 304 stainless steel models. Features a 1/2" Male National Pipe Thread on the outer ends that offers easy connectivity to just about anything.
The quick disconnect will hold pressure for most brewing applications if you plan on moving liquids at 60psi or less. 1/2" ID. Take note this is an open port model with no shut-off.
We designed the original stainless QD's for the brewing industry over a decade ago, and have been using the same reliable manufacturer ever since. Our design has certainly been imitated but has never duplicated at the same quality level. It’s no surprise MoreBeer! Stainless QD fittings have an almost unanimous 5 star customer rating!
Made by MoreBeer! from 304 stainless steel.
Please Note: This product does NOT work with our Brass or Plastic Quick Disconnects.
304 cast stainless steel ball lock quick disconnect made for high-durability
Black ring above the outer bushing to identify the QD for beverage use
Compatible with all ball lock style homebrew kegs
1/4" barb connection
This is a ball-lock type quick disconnect that is constructed from stainless steel for lifetime longevity. 1/4" barb.
This QD is for the Bev Out side. See here for the Gas In QD.
2 1/8" H
Please note: the outer bushing on the disconnect is made from chrome-plated brass. All parts that come into contact with liquid are stainless.
Kegland Part Number: KL02998
Heavy-duty ball lock quick disconnect made from 304 stainless steel for lifetime longevity Etched "In" label to clearly identify the QD for beverage use Pairs perfectly with stainless steel Torpedo Kegs and compatible with all ball lock corny kegs 1/4" flare thread connection Your Kegs are made out of stainless steel, why settle for plastic Quick Disconnects? Upgrade your serving setup to fully Stainless with a pair of Torpedo Ball Lock QDs! These hefty pieces are constructed of 304 SS, designed for lifetime longevity. Printed clearly with "In" and "Out" so even after a few they're easy to work with. Available for both Beer Out and Gas In, with either Barbed or Flared connections. See YMAN's below for the appropriate connectors! A flare fitting washer (KEG602) is recommended for use with this product. Perfect with our Torpedo Kegs, these will work with any Ball Lock Corny Keg. Features: 304 SS Construction - Built to last a lifetime 1/4" Flare connection Clearly Labeled Ball Lock Gas In 2" Height
Made by MoreBeer! from 304 stainless steel.
When used in conjunction with the female QD these quick disconnects seal up completely regardless of the liquids direction of flow, while remaining simple and easy to use. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2" Female National Pipe Thread on the ends for easy connectivity to almost anything.
The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 1/2" ID. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off.
We designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why MoreBeer! Stainless QD fittings have a near unanimous 5 star review.
Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.
To upgrade your brew system, and make your life easier, thread these QD’s on your kettle, mash-tun, pump and chiller! When used with the male QD, they seal up very well in either flow direction. They will save you time and prevent messes. Just get several silicone hoses of various lengths and put barbed male fittings on either end. Then use them wherever you need to in your system! They are so much easier to use than pushing and pulling the hoses off of barbs. It makes things interchangeable for cleaning, and provides quick installation and removal.
MoreBeer! designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why MoreBeer! Stainless QD fittings have a near unanimous 5 star review.
Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.
This will work with any of our H503 and H507 series of quick disconnects. These feature a 1/2" Female National Pipe Thread on the end for easy connectivity to almost anything. The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60 psi or less. 1/2" ID. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off.
To upgrade your brew system, and make your life easier, thread these QD’s on your kettle, mash-tun, pump and chiller! When used with the male QD, they seal up very well in either flow direction. They will save you time and prevent messes. Just get several silicone hoses of various lengths and put barbed male fittings on either end. Then use them wherever you need to in your system! They are so much easier to use than pushing and pulling the hoses off of barbs. It makes things interchangeable for cleaning, and provides quick installation and removal.
MoreBeer! designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why MoreBeer! Stainless QD fittings have a near unanimous 5 star review.
Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.
This will work with any of our H503 and H507 series of quick disconnects. These feature a 1/2" Male National Pipe Thread on the end for easy connectivity to almost anything. The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60 psi or less. 1/2" ID. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off.
Heavy-duty ball lock quick disconnect made from 304 stainless steel for lifetime longevity Etched "Out" label to clearly identify the QD for gas use Pairs perfectly with stainless steel Torpedo Kegs and compatible with all ball lock corny kegs 1/4" barb connection Your Kegs are made out of stainless steel, why settle for plastic Quick Disconnects? Upgrade your serving setup to fully Stainless with a pair of Torpedo Ball Lock QDs! These hefty pieces are constructed of 304 SS, designed for lifetime longevity. Printed clearly with "In" and "Out" so even after a few they're easy to work with. Available for both Beer Out and Gas In, with either Barbed or Flared connections. See YMAN's below for the appropriate connectors! Perfect with our Torpedo Kegs, these will work with any Ball Lock Corny Keg. Features: 304 SS Construction - Built to last a lifetime 1/4" Barb connection Ball Lock Beverage Out 2" Height
Made by MoreBeer! from 304 stainless steel.
This quick disconnect seals up very well without a lot of work in connecting them. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2" Barb on the ends for easy connectivity to any 1/2" tubing you may have.
The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 3/8" ID. Open port, does not have shut-off.
We designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why MoreBeer! Stainless QD fittings have a near unanimous 5 star review.
Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.
Heavy-duty ball lock quick disconnect made from 304 stainless steel for lifetime longevity Etched "Out" label to clearly identify the QD for gas use Pairs perfectly with stainless steel Torpedo Kegs and compatible with all ball lock corny kegs 1/4" flare thread connection Your Kegs are made out of stainless steel, why settle for plastic Quick Disconnects? Upgrade your serving setup to fully Stainless with a pair of Torpedo Ball Lock QDs! These hefty pieces are constructed of 304 SS, designed for lifetime longevity. Printed clearly with "In" and "Out" so even after a few they're easy to work with. Available for both Beer Out and Gas In, with either Barbed or Flared connections. See YMAN's below for the appropriate connectors! A flare fitting washer (KEG602) is recommended for use with this product. Perfect with our Torpedo Kegs, these will work with any Ball Lock Corny Keg. Features: 304 SS Construction - Built to last a lifetime 1/4" Flare connection Ball Lock Beverage Out 2" Height
This stainless steel ball lock cap features soda bottle threads, allowing you to convert a 1 or 2 liter soda bottle into a convenient travel growler. The ball lock is compatible with both gas and beverage disconnects, so you can charge the PET bottle before you leave the house and dispense on the go. Use the Duotight compatible stem to connect a 8mm or 9.5mm reducer, then attach EVABarrier draft line to serve as your dip tube and you're all set! These caps also work great for quickly and conveniently cleaning your draft lines. Mix up a small batch of line cleaning solution in a soda bottle, attach the ball lock cap, and then connect it to your beverage line. Place a bucket below your tap to catch the cleaning solution and open your faucet. Then simply turn the bottle upside down and squeeze it to push solution through your line and out the faucet. You can also choose to pressurize the bottle first, but squeezing the solution through is just as effective. Fermenting with the FermZilla? This is ball lock fitting is also compatible with the FermZilla Collection Container. If you use the collection container to add dry hops, attach one of these caps and you'll be able purge the container of oxygen before opening the dump valve to introduce the hops. Attach some tubing and diffusion stone and you can oxygenate your wort through the collection container as well! Features: 6.5mm Duotight Compatible Liquid and Gas Ball Lock Compatible Disassembles for Easy Cleaning Made from Stainless Steel 28mm PCO 1881 Threads Please note: The threaded section of the bottleneck must be at least 1/2" long to form a seal. These caps are not compatible with the KegLand 500mL PET Bottles. Kegland Part Number: KL20435
Use this fitting to convert 1.5" tri-clamp to Male Quick Disconnect. This fitting is extremely useful when transferring wort from your brew kettle to a stainless fermenter with tri-clamp connections. If you already use female QDs on your transfer tubing, simply connect to this male QD x tri-clamp fitting, rather than having a specific length of transfer tubing with quick disconnect on one end and barbed T.C. fitting on the other.
1.5" tri-clamp
Male Quick Disconnect
Made from 304 stainless steel
ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
Use this fitting to convert 1.5" tri-clamp to Female Quick Disconnect. This fitting is extremely useful when transferring wort from your brew kettle to a stainless fermenter with tri-clamp connections. If you already use male QDs on your transfer tubing, simply connect to this female QD x tri-clamp fitting, rather than having a specific length of transfer tubing with quick disconnect on one end and barbed T.C. fitting on the other.
1.5" tri-clamp
Female Quick Disconnect
Made from 304 stainless steel
ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
Control beverage flow as liquid leaves the keg—replaces the need for flow control faucets or compensators downstream
Perfect for mobile draft applications when you can't balance your lines on the fly
Made from stainless steel for high-durability
Black ring above the outer bushing to identify the QD for beverage use
Compatible with all ball lock style homebrew kegs
1/4" flare thread connection
Pick up this Flow Control Ball Lock Disconnect and stop banging your head against the wall trying to balance your draft line. We're all after the same thing -- the perfect pour -- but balancing beer lines can be a daunting task. You do the research and crunch the numbers, choose the right inner diameter line, cut it to the ideal length, only to spend your evenings dialing your regulator setting back and forth like a turtle-necked safecracker. This stainless steel flow control disconnect will eliminate the guess work and fast track you to perfectly pouring beer.
Flow control faucets are a popular option but they're inherently flawed due to the point of restriction being at the very end of the beer line. The flow control apparatus inside the faucet causes turbulence, which leads to foaming and carbonation coming out of solution prematurely. Flow control disconnects on the other hand restrict the flow before the beer enters the beer line so the head pressure created by the beer line keeps the carbonation in solution.
Another advantage of FC disconnects is that you don't have to rely on a small inner diameter or long line length to apply flow resistance. In fact, even in the fully open position the disconnect will provide some inherent flow resistance, so you should use a shorter line than the 5-6 ft. length that is typically recommended. This makes the flow control disconnect ideal for dispensing beer on the go where you might have a picnic tap with a short line or a disconnect faucet adapter with no line at all!
Please note: make sure your keg post o-rings are in good condition before using this fitting. If they are overly worn and you are not getting a good seal, replace the post o-ring then re-attach the ball lock fitting.
Kegland Part Number: KL09041
Heavy-duty ball lock quick disconnect made from 304 stainless steel for lifetime longevity Etched "In" label to clearly identify the QD for gas use Pairs perfectly with stainless steel Torpedo Kegs and compatible with all ball lock corny kegs 1/4" male pipe thread connection For far too long ball lock disconnect fittings have come in only two options -- barb or flare. Torpedo Keg said nuts to that! Then they put down the jar of Planters, pulled out the drawing board and designed this disconnect with 1/4" MPT threads. Made from all stainless steel, we used this fitting to make our Ball Lock Spunding Valve. We're not sure what else it will be used for, but we know our customers, and we're excited to see what you crafty folks come up with! Features: 304 SS Construction - Built to last a lifetime 1/4" MPT Clearly Labeled Ball Lock Gas In 2" Height
Heavy-duty ball lock quick disconnect made from 304 stainless steel for lifetime longevity Etched "Out" label to clearly identify the QD for beverage use Pairs perfectly with stainless steel Torpedo Kegs and compatible with all ball lock corny kegs 1/4" male pipe thread connection For far too long ball lock disconnect fittings have come in only two options -- barb or flare. Torpedo Keg said nuts to that! Then they put down the jar of Planters, pulled out the drawing board and designed this disconnect with 1/4" MPT threads. Made from all stainless steel, we used the gas-in version of this fitting to make our Ball Lock Spunding Valve. We're not sure what else it will be used for, but we know our customers, and we're excited to see what you crafty folks come up with! Features: 304 SS Construction - Built to last a lifetime 1/4" MPT Clearly Labeled Ball Lock Bev Out 2" Height Please note: this is not a flared disconnect. The connection is 1/4" male pipe thread.
If your home draft system is a mix of ball lock kegs and European sanke kegs, having a coupler with ball lock adapters is a huge plus. This allows you to have all your draft lines ending in a ball lock quick disconnect, making it quick and easy to swap lines from sanke keg to ball lock.
Note that the gas-in adapter has a small line cut into the body of the adapter where the bev-out adapter is smooth.
The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port.
S-style sanke coupler
Stainless body
Stainless probe
PRV rated to 4.5 BAR (65 psi)
If your home draft system is a mix of ball lock kegs and commercial sanke kegs, having a coupler with ball lock adapters is a huge plus. This allows you to have all your draft lines ending in a ball lock quick disconnect, making it quick and easy to swap lines from sanke keg to ball lock.
Note that the gas-in adapter has a small line cut into the body of the adapter where the bev-out adapter is smooth.
The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port.
D-style sanke coupler
Stainless body
Stainless probe
PRV rated to 4.5 BAR (65 psi)
Type C Camlock Fitting. Female Camlock with 1/2" Barb (13mm).
Camlock fittings are the preferred choice for many home and professional brewers alike. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability.
304 Stainless steel construction. 150 psi working pressure.
Kegland Part Number: KL04497
Type B Camlock Fitting. Female Camlock with 1/2" Male BSP.
Camlock fittings are the preferred choice for many home and professional brewers alike. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability.
304 Stainless steel construction. 150 psi working pressure.
Kegland Part Number: KL04480
Type A Camlock Fitting. Male Camlock with 1/2" Female BSP.
Camlock fittings are the preferred choice for many home and professional brewers alike. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability.
304 Stainless steel construction. 150 psi working pressure.
Kegland Part Number: KL04503
Type E Camlock Fitting. Male Camlock with 1/2" Barb (13mm).
Camlock fittings are the preferred choice for many home and professional brewers alike. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability.
304 Stainless steel construction. 150 psi working pressure.
Kegland Part Number: KL04527
Type D Camlock Fitting. Female Camlock with 1/2" Female BSP.
Camlock fittings are the preferred choice for many home and professional brewers alike. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability.
304 Stainless steel construction. 150 psi working pressure.
Kegland Part Number: KL04473
Type F Camlock Fitting. Male Camlock with 1/2" Male BSP.
Camlock fittings are the preferred choice for many home and professional brewers alike. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability.
304 Stainless steel construction. 150 psi working pressure.
Kegland Part Number: KL04510
Magnetic drive enables you to slow down the flow without damaging the pump—just add a ball valve to the outlet!
T.C. connection allows the pump head to be oriented at any angle in a full 360-degrees
Pull ring PRV at the pump outlet makes it easy to purge air and prime the pump before each use
Inline flow path for smooth integration into your brewery while keeping your tubing lines tidy
Stainless steel head with 1/2" threaded ports to attach your preferred fittings—tri-clamp, quick disconnect, camlock, and More!
The best-selling MKII Magnetic Drive Pump now available with a major upgrade! This unit comes standard with an inline stainless steel pump head that installs on the pump body with a 3" tri-clamp. Compared to the standard "center inlet" pump head, the "inline" flow path can make it much easier to integrate into your brewery and keep your brewing hoses tidy. At the outlet of the pump, there is a very handy pull ring PRV that allows you to bleed liquor or wort from the pump head to release trapped air and prime the pump. And with the 3" T.C. connection, not only do you have a full 360-degrees to orient the pump head any which way, cleaning the pump after use could not be easier—just pop off the tri-clamp, wash out the pump head, and clamp back on.
The MKII is a perfect pump for your system and comes highly recommended for brewers stepping up to all-grain brewing. Rather than schlepping heavy kettles filled with hot liquor or wort around your brewery, or awkwardly stacking them into a 3-tier gravity setup, allow this handy pump to move liquid from vessel to vessel while everything remains in place. The magnetic drive allows you to slow down the flow without damaging the pump. This can be done by attaching a ball valve to the outlet side of the pump, and then you simply open or close the valve to control the flow rate. The pump itself is not self-priming, but priming is super easy thanks to the pull ring PRV which will help ensure the pump head is full of liquid and trapped air is released before powering it on.
Tri-Clamp Pump Head
The T.C. pump head can be removed quickly and easily using the 3" tri-clamp. This means no drivers or power drills are needed to back out the six Phillips head screws that mount the pump head on the standard version of the MKII. Whip the head off in a flash to clear out spent grain, hop material, or clear a blockage. Attaching the pump head with a tri-clamp also allows the head to be rotated at any angle in a full 360-degrees. This makes it easy to configure the plumbing to your unique brewery setup.
Inline Design
An "inline" pump head simply means the input and output are on a straight horizontal line with one another which can make it easier to integrate into your brewery setup. If you're using a 3-vessel horizontal system, the inline pump head will make it easier to keep your hoses neat and tidy compared to pumps heads with a center inlet.
PRV Purge Valve
The corny keg style PRV will make priming the pump a breeze. Simply let bleed the pump head to purge air out before turning the pump on and you'll avoid any cavitation issues. The PRV also acts as a safety so you do not over pressurize your pump head or brewery system.
304 Stainless Steel
The entire pump head is made from 304 grade stainless steel so it's highly resistant to chemicals, heat, and physical abuse. The 1/2" BSP threaded ports can be used to attach barbs, quick disconnects, camlocks, tri-clamp adapters, or any other 1/2" fittings you prefer.
Features:
110V / 60hz
Max Head: 11.15 ft. (3.4 m)
Max Flow: 5 Gal/min (19L/min)
Max Temperature: 248°F (120°C)
360° rotatable stainless steel pump head
1/2" BSP ports
Water resistant casing (not waterproof)
KegLand Part Number: KL27236
If you're brewing on a budget and want the most affordable pump possible, check out the standard model MKII pump. This has been our best-selling pump for years and you can always upgrade it down the road with the standard stainless center inlet head or inline stainless tri-clamp head.
Upgrade your MKII Magnetic Drive Pump with a stainless steel pump head that quickly & easily installs via 3" tri-clamp T.C. connection allows the pump head to be oriented at any angle in a full 360-degrees Pull ring PRV at the pump outlet makes it easy to purge air and prime the pump before each use Inline flow path for smooth integration into your brewery while keeping your tubing lines tidy Stainless steel head with 1/2" threaded ports to attach your preferred fittings—tri-clamp, quick disconnect, camlock, and More!
Upgrade your MKII Magnetic Drive Pump with a stainless steel inline pump head! The TC Breakdown Brewing Pump Head provides several advantages over the standard MKII pump head, first and foremost being it's made of stainless steel instead of plastic. This allows for much easier installment of fittings without the risk of breaking off the plastic inlet or outlet. It will also convert the pump head from "Center Inlet" to "Inline" flow path which can make it much easier to integrate into your brewery and keep your brewing hoses tidy. At the outlet of the pump, there is a very handy pull ring PRV that allows you to bleed liquor or wort from the pump head to release trapped air and prime the pump. But what some MKII users might find most exciting about this upgrade kit is that it converts the pump head connection to 3" tri-clamp! Not only do you have a full 360-degrees to orient the pump head any which way, cleaning the pump after use has never been easier—just pop off the tri-clamp, wash out the pump head, and clamp back on. This upgrade kit is only compatible with the 25-Watt MKII pump (PMP50). It will not fit the larger 65-Watt MKII or the Blichmann Engineering RipTide pump. If you don't already own the 25-Watt MKII, you can purchase it with the T.C. pump head already installed here. Tri-Clamp Pump Head The T.C. pump head can be removed quickly and easily using the 3" tri-clamp. This means no drivers or power drills are needed to back out the six Phillips head screws that mount the pump head on the standard version of the MKII. Whip the head off in a flash to clear out spent grain, hop material, or clear a blockage. Attaching the pump head with a tri-clamp also allows the head to be rotated at any angle in a full 360-degrees. This makes it easy to configure the plumbing to your unique brewery setup. Inline Design An "inline" pump head simply means the input and output are on a straight horizontal line with one another which can make it easier to integrate into your brewery setup. If you're using a 3-vessel horizontal system, the inline pump head will make it easier to keep your hoses neat and tidy compared to pumps heads with a center inlet. PRV Purge Valve The corny keg style PRV will make priming the pump a breeze. Simply let bleed the pump head to purge air out before turning the pump on and you'll avoid any cavitation issues. The PRV also acts as a safety so you do not over pressurize your pump head or brewery system. 304 Stainless Steel The entire pump head is made from 304 grade stainless steel so it's highly resistant to chemicals, heat, and physical abuse. The 1/2" BSP threaded ports can be used to attach barbs, quick disconnects, camlocks, tri-clamp adapters, or any other 1/2" fittings you prefer. KegLand Part Number: KL27267
This is the female side of the Garden Hose Quick Disconnects. This set enables you to quickly and efficiently connect and disconnect lines from your Wort Chiller, Water Filter, or whatever else you feel could be improved through quicker connections! This product is designed to work in conjunction with our Male Garden Hose Quick Disconnect. Please Note: This product will NOT work with our Stainless or Plastic Quick Disconnects.
Quick Disconnects are a favorite among homebrewers for their ability to quickly move from one configuration to another. With the Brass Quick Disconnect Set you can easily connect and disconnect your water line to various equipment. These QD's must be placed in a configuration where water is always exiting the female portion of the QD and entering the male portion of the QD. For example the Female threads x Female QD portion is placed on the end of the hose while the Male QD portion is connected to your equipment. This set includes one Male GHT (Garden Hose Thread) x Male QD and one Female GHT x Female QD. We sell several adapter pieces that allow you convert GHT to male or female 1/2 inch pipe thread or 1/2 inch hose barb, making it a snap mount these QDs on just about any piece in your brewery. Please Note: This product will NOT work with our Stainless Steel or Plastic Quick Disconnects.
You likely want to monitor the temperature of your wort as it moves from the chiller to the fermenter, and now you can do just that with this In-Line Thermometer. This high quality thermometer features stainless steel quick disconnects for easy installation in line with the rest of your brewing system, and many users install it on the “out” side of their convoluted heat exchangers and counterflow chillers.
As the wort runs through the body of the in-line thermometer it runs across the 2-inch thermometer probe, giving an instant and incredibly accurate reading of its exact temperature. Ryan Barto, our Fulfillment Operations Manager and also the thermometer’s inventor, says that this handy device will help you to keep better control of your mash temperatures, and makes it easier to transfer your wort to your conical through the counterflow chiller.
Our new FTSs quick disconnect kit is the perfect way to increase the efficiency of your cooling system while also making it easier to detach your fermenter's chiller coil for easy cleaning.
The neoprene sleeve both insulates and wicks away condensation to reduce temp loss in your FTSs tubing. The sleeve is 10 feet in total length and can be cut to custom lengths to adapt to any FTSs setup. Once cut, use the included velcro strip to secure the sleeve to the quick disconnect fitting.
The quick disconnect fitting was custom tooled for Ss Brewtech with 3/8" hose barbs and features all EPDM seals, which maintain sealing properties at low temperatures. In addition, they include all stainless internal hardware, and integrated valves in both the male and female components to prevent spilling. These fittings work great with either glycol or chilled water from a cooler.
One Quick Disconnect option:
(1) 10' Neoprene Sleeve
(1) Quick Disconnect Fitting
(2) Velcro strips
(4) Stainless hose clamps
Two Quick Disconnect option:
(1) 10' Neoprene Sleeve
(2) Quick Disconnect Fitting
(4) Velcro strips
(8) Stainless hose clamps
This portable keg faucet will surely have your friends saying "Dang, that is way classier than a picnic tap!"
This Quick Disconnect Faucet Assembly comes in handy when you take your keg with you to a gathering. Pair it with a small CO2 injector (KEG950), and you won’t have to mess with tubing when you’re away from home.
Complete assembly. Comes with QD faucet adapter, stainless faucet, faucet knob and ball lock beverage out quick disconnect.
