National Chemicals

BLC, also known as Beer Line Cleaner, is a preferred alkaline based draft line cleaner. Used to remove bacteria and loosen mineral deposits from beverage lines, faucets, etc.. Can be used with all type of cleaning systems and al types of draft set ups including long draw commercial systems, homebrew set ups, kegerators, draft box lines, etc.. Can be used with cold or warm water. No hazardous shipping.   Instructions for use: Add ½ oz BLC for each quart of water.  Drain out beer and run solution into line.  Circulate or let stand in lines for at least 15 minutes  Flush cleaning solution from line and rinse well with clean water. 

Read more less

Homebrewers know that proper sanitation techniques are critical for creating high quality homemade beverages. BTF Iodophor, an iodine based sanitizer, is a powerful, broad spectrum antimicrobial product that kills a wide range of bugs that are waiting to infect your fermentation. Unlike acid based sanitizers, BTF Iodophor reliably kills yeast, mold, fungus, bacteria, viruses and blood borne pathogens.  BTF Iodophor offers a low cost per use, is gentler on your hands than other sanitizers, and is very low foaming. If used in the correct dilution (very important) it is a no-rinse sanitizer. It is safe to use on all your brewing equipment such as buckets, kegs, tanks, fermenters, bottles, etc. Even if you frequently use a sanitizer, it’s a good idea to have multiple sanitizers on hand especially when working with wild yeasts and bacteria or as a “change of pace” sanitizer. Directions for 12.5 PPM Brewing Sanitizer Solution: To Make 1.5 Gallons of sanitizer: Mix 1 tsp BTF Iodophor into 1 ½ gallons cool water To Make 5 Gallons of Sanitizer: Mix ½ oz (1 Tablespoon) BTF Iodophor into 5 gallons cool water Allow solution to contact surface for 2 minutes, then air dry. Iodophor Features: Kills yeast, mold, fungus, gram positive bacteria, gram negative bacteria, spore forming bacteria, viruses and blood borne pathogens Use at a rate of 1/2 oz of BTF per 5 gallons Low foaming No-rinse at 12.5 PPM dilution (see above) Non-corrosive and gentle on skin and hands

Read more less

Does your cleaner power through dirt in cold water? Craft Meister Alkaline Brewery Wash does! This versatile and powerful brewery cleaner dissolves quickly and cleans rapidly in cold water in addition to hot water. Ideal for overnight soaking as the solution does not lose effectiveness over time like oxygen based cleaners such as Oxi Clean. Excellent for recirculating keg washers, clean-in-place (CIP) systems, and unmatched at removing bottle labels. Craft Meister Alkaline Brewery Wash will not leave a white chalky film on your equipment like most oxygen based cleaners and rinses away with ease. Containers include a scoop for easy measuring. Feature Summary: Cleans effectively in cold water Works longer than oxygen based cleaners; perfect for overnight soaks Removes bottle labels with ease No chalky residue Avoid use on aluminum Non-caustic and will not burn skin or hands Dilution Rates: Fermenters, Fittings, Bottles and Tubing: use 1 oz (2 scoops) per gallon of water. For heavy soils and brew kettles use 2 oz (4 scoops) per gallon of water. Use: Spray or immerse surfaces and allow cleaner to loosen soil for 5-20 minutes. Rinse with clean water and sanitize, if required.

Read more less

Convenient, easy, and simple – just the way cleaning should be. Never guess about how much cleaner you should be using with Craft Meister Keg & Carboy Cleaning Tablets, the easiest way to clean your dirty gear. Just fill the dirty keg or carboy with hot water, add Tablets and let them do the work for you! Similar to laundry detergent pods and dishwasher tablets, these handy Tablets are not only easier to use than bulk powder, they may be more cost effective over time by ensuring you use the correct amount of cleaner every time. Keg & Carboy Cleaning Tablets are a mix of powerful alkaline and oxygen detergents providing a one-two punch to knock out soils and build-up. Safe for use on glass, plastic, and stainless steel. Stir lightly to dissolve tablets. Use a brush or repeat for stubborn soils. If you are looking for a cleaner that works in cold water, or where you want it to sit overnight, we recomment you check out Craftmeisters Alkaline Brewery Wash. Directions: Carboy cleaning: Fill carboy with HOT water Add 2 tablets per 3 gallons of water For heavy soils, use 1 extra tablet per carboy or soak longer (up to 24 hours) Soak for at least 60 minutes Rinse thoroughly, then sanitize Keg cleaning: Fill keg with HOT water Add 1 tablet per 3 gallons of water Soak for at least 60 minutes Rinse thoroughly, then sanitize

Read more less

Craft Meister Oxygen Brewery Wash is an oxygen based cleaner that dissolves quickly into solution and gets to work faster than competing products. Unlike other oxygen based cleaners, Oxygen Brewery Wash will not leave behind a chalky residue or film on your equipment. With more active cleaning oxygen than any similar product in the market and a non-caustic alkaline punch, Oxygen Brewery Wash blows away dirt and debris with ease. Works best with hot water (minimum 100 degrees Fahrenheit). For similar performance with cold water see the Craftmeister Alkaline Cleaner. Containers include a scoop for easy measuring. Feature Summary: More active oxygen than competing products Dissolves faster at lower temperatures than Oxi Clean or other oxygen cleaners Rinses faster with less water than other cleaners Cleans with active oxygen and non-caustic alkaline detergents Dilution Rates: For Fermenters, Fittings, Bottles and Tubing use 1 oz (2 scoops) per gallon of water. For heavily soiled equipment and Brew Kettles use 2 oz (4 scoops) per gallon of water. Use: Spray or immerse surfaces and allow cleaner to loosen soil for 5-20 minutes. Rinse with clean water and sanitize, if required.

Read more less

Craft Meister Growler Cleaning Tablets are the easiest and most effective way to keep all of your glass, stainless and plastic growlers clean and beer ready. Just fill the growler with warm water, add a Tablet, soak for 10-15 minutes, then dump and rinse. The Tablets rinse away easily with no fragrances, dyes or residues left behind. Also works great on drinking water bottles, Erlenmeyer flasks, and coffee mugs and pots. Directions: Fill Growler with warm water. Add 1 tablet and let dissolve. Soak for at least 10 minutes. Empty growler and rinse thoroughly. Repeat if necessary, sanitize if required. For heavy soils: Use 2 tablets. Let soak overnight up to 24 hours.  Increase water temperature.

Read more less