Dispensing - Draft Sale

Draw beer from the top of your keg instead of the bottom. The top is always where the clearest beer is! Super helpful when you have to move your keg before serving. Kicked up sediment will remain near the bottom Installs on any Ball Lock or Pin Lock keg quickly and easily Also available with the optional Filter Attachment With the Torpedo Buoy™ floating dip tube, you'll be pouring the clearest beer possible from first pint to last! As your beer sits at low temperatures, more and more haze particles settle out to the bottom of the keg. This means the clearest beer in the keg is always at the top. The Buoy™ uses a stainless float to position the silicone dip tube just 1 inch below the surface of the beer. Kick homebrew haze to the curb and start drawing the brightest beer possible. Yeah, Buoy! Installs on any Ball Lock or Pin Lock keg quickly and easily. Simply remove your bev out post and replace the long metal dip tube with the provided 3" metal dip tube. Slide one end of the silicone tubing over the 3" dip tube and the other end of the tubing over the metal tube connected to the float. The silicone tubing is sized for 5-gallon kegs, but you can cut it shorter to use on 1.5 or 2.5-gallon kegs. Also compatible with the Torpedo Keg Depth Charge series 10 & 15 gallon kegs! Also available with the optional Filter Attachment. This will prevent hop material and other solids from ever entering the dip tube. A great upgrade accessory if you like to dry hop or add other additions directly to your keg while serving. Specifications: 3" Stainless Dip Tube 1/4" ID Silicone Tubing (23.5" long) Ball Float Made from 304 Stainless Steel Installation Note: The Torpedo Buoy™'s silicone dip tube is sized to fit all Torpedo Kegs and other 5-gallon or smaller corny kegs. Depending on the size and dimensions of your keg, you may need to shorten the silicone tube for better performance. When installed on your empty keg, you ideally want the Buoy™ to hang freely with just enough length for the end of the dip tube to touch the bottom of the keg.

Read more less

Turn your Intertap or Nukatap faucet into a self-closing faucet with the use of this stainless steel faucet spring. Forces the tap handle back to the closed position when you let go. This spring is designed to work with the Intertap Stainless Steel shanks, though we have found it also works with our D1245A. Made from 304 Stainless Steel. Not compatible with Flow Control faucet models or other brands of faucets.   Kegland Part number: KL00994

Read more less

Easily set and view different pressures downstream from a single CO2 regulator. Serve different beverages at different pressures without the need for expensive regulator manifolds! Built-in pressure gauge for easy reference when adjusting pressure settings Pressure gauge is interchangeable—swap to different pressure ranges that better suit your application Compatible with both liquid and gas 8 mm Duotight inlet/outlet for use with 8 mm OD EVABarrier tubing or 8 mm Rigid Joiners The Duotight In-Line Regulator is an ideal solution if you want to serve different beers at different gas pressures. In a typical multiple line, multiple pressure system you would run a gas line from your main regulator into a secondary regulator where you would set different pressures. While that is ideal, it is a little pricey. This little sweetheart lets you set different pressures at a far lower cost. What we do is set the main regulator at the highest pressure we want in the system - for example a keg of soda that you want to carbonate and serve at 25 psi.  Run the gas line into a manifold and then install one of these after the manifold on each line where you want to decrease the pressure, for example lowering to 10psi to serve your British pale ale and 14 psi to serve your summertime lawnmower lager. Works with both gas and liquid. Easily adjust the flow can be adjusted with the yellow adjustment knob. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing (D1717 or D1718).  Features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. Stepping Down Pressure The ideal regulation scenario occurs when the inline regulator steps down the output pressure to at least 10 PSI less than the inlet pressure. For example, if the inlet pressure is 30 PSI, the regulator effectively manages a range from 0–20 PSI on the output side ensuring optimal performance and stability. Ideal regulation scenario (10 PSI less than inlet pressure) Example of 30 PSI inlet translating to 0–20 PSI output Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-60 psi Made with quality EPDM seals Wall mountable WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge. Kegland Part number: KL15035    

Read more less

The KOMOS multi tool is a convenient instrument to keep nearby that is suitable for most of the fittings you'll encounter when setting up or making adjustments to your kegerator or keezer. If you're kegging your brew then you're well acquainted with the many nuts, bolts, and clamps it takes to rig up a draft system. Even small adjustments will often have you walking back and forth from the tool box before the job done. The KOMOS draft tool offers 7 unique functions for tasks including faucet collar adjustments, shank hex nut adjustments, connecting or disconnecting a CO2 regulator and tank, removing Duotight fittings, and, most importantly, removing bottle caps from beer bottles. The KOMOS multi tool is suitable for most connection adjustments, but if you're adjusting a CO2 regulator nut that has been overtightened, we recommend using a standard Crescent wrench for extra torque. Functions: CO2 Regulator Nut Spanner Shank Hex Nut Spanner Faucet Coupling Ring Pin Wrench Flare Swivel Nut Spanner 8 mm Duotight Removal 9.5 mm Duotight Removal Bottle Opener   Made of stainless steal.  

Read more less

Forward-sealing design prevents beer residue from gumming up the faucet! Threaded spout can be replaced with a variety of attachments Unique sliding shuttle design allows the faucet to last longer than standard floating o-ring design 304 stainless steel construction The patented Stainless Steel Intertap Faucet is a forward sealing faucet that represents the most modern faucet design. It has a modular, threaded spout which can fit a variety of different attachments including a growler filler or a stout spout. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transfering to your beer while you pour. Other forward sealing faucets use a floating o-ring, which is just as sanitary but requires the o-ring to move inside the faucet body in order to seal correctly. This can become a problem as the faucet ages. Intertap faucets use a sliding shuttle that guides the o-ring into the perfect position every time.  The threaded spout easily unscrews from the faucet and can be replaced by a growler filler or stout spout quickly and easily. Pour a pint and then fill a growler in no time at all. 304 Stainless Steel construction so you don't have to worry about chrome plating wearing off and exposing your beer to brass.   Kegland Part number: KL00970

Read more less

How many times have you been asked "What's on this tap?" The MoreBeer! tap handle is designed to work with our full lineup of recipe kits. Each recipe sheet has a custom color cut out that can be slipped into the handle. We had a lot of fun creating over 150 original designs when the tap handle was originally released, and we continue to create new tap handle cut outs for every recipe kit we develop. We think you and your friends will love them.  Not using a MoreBeer! kit? No problem! Each new tap handle also comes with a removable, erasable chalkboard surface. Additionally, the back of the tap handle features a chalkboard surface that can be written on as well, which is handy and cool if your tap handle is seen from both sides.   The insert is made of a thin sheet of metal and coated with chalkboard paint. The outer portion of the tap handle is made of wood and also painted with chalkboard paint. Note: You might need to use a bonnet angler (D1270) if you converted an upright refrigerator.  Bonnet anglers allow longer tap handles to sit in a more vertical position so they do not angle back and hit the refrigerator door or wall.   Tap Board Features: Designed to work with MoreBeer! recipe kits Includes removable metal chalkboard insert when not using a MoreBeer! recipe kit Back of tap handle also serves as chalkboard surface Dimensions: 7.25" H x 2.25" W x 0.75" D  

Read more less

Easily attaches to any Intertap faucet. Just unscrew the standard spout and replace it with this growler spout. Then you'll have a 1/2" (13mm) barb on the end of your faucet. Compatible with Intertap and NukaTap faucets. Stainless Steel Construction Kegland Part number: KL01038  

Read more less

High performance primary regulator designed to handle the workload of dispensing from multiple taps without freezing up! Dual high-pressure and low-pressure gauges to easily reference CO2 cylinder pressure and output pressure Pressure settings are easily adjusted by hand using the large plastic adjustment knob CGA320 inlet features a built-in gasket where the unit attaches to the CO2 tank—eliminating the need of replacing fiber washers with each tank swap Made in the USA. Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment One-way shutoff valve outlet protects your regulator from backflow and can be turned on/off to stop gas flow without needing to close your tank When it comes to CO2 regulators, we’ve tried them all. This quality unit by Taprite is our favorite on the market. It’s no wonder this regulator is trusted by so many breweries and beer bars—it represents the best quality at a great price. Available in a standard, single-body model, as well as a dual-body model which allows you to send different pressures to two separate kegs from the same CO2 tank! The things you’ll love about this regulator are:  The large front knob makes pressure adjustment tool-free, easy & fast.  The built-in gasket where the regulator connects to the CO2 tank eliminates the constant replacement of fiber washers every time you change out your tank.  The barbed outlet features a one-way on/off valve which prevents backflow and protects the regulator’s internals.  The gauges are easy to read. The low pressure gauge reads from 0 to 60 psi. The optional available gauge cage is the best on the market. This is the T742HP model, where the HP stands for high performance; it won't freeze up when multiple taps are running at once. Best of all is the consistent pressure regulation. With many regulators the pressure can 'creep' up over time. This unit holds the pressure rock steady. No drifting.    Built by Taprite, an American company. 

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more in early March. Wide 0-60 PSI operating range suitable for both dispensing and rapid burst carbonation Ideal for seltzers and high-carbonation drinks requiring 30-40 PSI Includes a Duotight adapter for EVABarrier tubing and a 1/4" flare fitting with barb, allowing for quick and adaptable gas line setups Heavy-duty steel gauges with rubber bumpers, robust body, and precision diaphragm ensure long-lasting, accurate pressure adjustments Compatible with standard US CO2 tanks and can be adapted for use with Nitrogen / Argon tanks The robust body and precision diaphragm provide high flow rates, and the pressure can be easily and precisely adjusted with the hand dial. Extra thick stainless gauges come with rubber bumpers for added protection. The dial faces are triple-scaled to read in psi, bar and kPa. The PRV is rated to 65 psi (4.5 bar) for added safety while in use. Comes with male flare thread gas-out with included 1/4" barb and nut. Easily swap out the barb to a different size if desired. On the back of the regulator body are three M6 screw holes for mounting (screws not included). Each KOMOS regulator includes a Duotight Adapter, allowing for quick connection of EVABarrier draft tubing for a solid, yet easy to change, way of connecting gas line. Add Duotight Tees to easily split the line to multiple kegs.   The regulator is CO2 ready with standard US CGA320 threads. It can also be used with Nitrogen or Argon tanks with the optional CGA320 x CGA580 Adapter. Features: 0–60 PSI operating range Low pressure gauge reads from 0–100 Pull ring PRV rated to blow off at 65 PSI Strong, robust design Highly accurate precision diaphragm 1/4" flare fitting with barbed outlet & Duotight adapter fitting M6 mounting screw holes Made in accordance with AS 4267  

Read more less

Newest faucet design on the market! Reduced first pour foam due to low thermal mass Forward-sealing design prevents beer residue from gumming up the faucet Unique shuttle design greatly improves laminar flow, improving the pour of carbonated beverages Compatible with all Intertap faucet accessories and shanks First Pour Foam Reduction Every kegerator owner knows the letdown of pouring your first pint of the day and getting too much foam. Even with perfectly balanced draft lines, first pour foam is sometimes unavoidable simply due to the temperature of the faucet itself. Running beer through the faucet will drop the temperature, and the foaming will subside, but not without a bit of wasted beer from pouring off excess head. The NukaTap beer faucet drops to beer serving temperature much faster thanks to its lower thermal mass. Simply put, the bulkier the faucet is, the more beer is needed to flow through and chill the tap. The NukaTap is over 20% lighter than its Intertap predecessor, and even lighter still compared to other brands of faucets. Improved Laminar Flow The inspiration for the NukaTap name comes from its uniquely designed "nuke-shaped" shuttle that resides on the inside of the faucet. The NukaShuttle went through numerous rounds of redesigns and countless hours of testing to find a shape that provides superior laminar flow. This means that liquid passes by the shuttle with very little resistance, allowing highly carbonated beers or hard seltzers to pour like a dream. Sanitary Design The NukaShuttle is the world’s first seamless single-piece design. Traditional taps feature an o-ring seated on a stainless steel shuttle, which can cause a couple of issues. After many pours, the stainless shuttle rubbing against the internal body of the faucet will create small fissures that become potential infection sites, and the seated o-ring can be difficult to clean in place, making your draft cleaning and sanitizing process less effective than you realize. The NukaShuttle is an advanced TPV rubber matrix that has been seamlessly formed over a durable PP skeleton. This single-piece design eliminates the pitfalls of older manufacturing methods, making it one of the most sanitary faucets on the market. Forward Sealing vs. Rear Sealing From tap rooms to home bars, forward-sealing faucets are the ideal choice for any draft setup. In traditional rear-sealing taps, beer will drain out of the entire faucet when it's in the closed position. This means the internal mechanism is coated in beer, which then dries and becomes a sticky residue. Forward-sealing faucets, on the other hand, keep the tap full of beer so it never has a chance to dry and gunk up the internal parts. This makes the faucet much easier to clean and also reduces the chance of off flavors transferring to your beer while you pour. Made from stainless steel Shuttle made from TPV O-rings made from EPDM NSF approved Kegland Part Number: KL15509    

Read more less

This sleek black faucet handle blends a clean, professional look with simple functionality.     Standard size, 2.5" black cylindrical plastic faucet handle for beer faucets. 

Read more less

This standard, black plastic handheld faucet will remind you of the one you used to pour beer in college! A great, affordable and efficient way to serve beer at any gathering or event.    Commonly called a "cobra tap" or "picnic faucet."    1/4" outlet barb. 3/16" line will fit if softened in hot water for about 10 seconds prior to assembly.  The tap threads apart for easy cleaning. Please be make sure the threaded portion is assembled tight before use.   Kegland Part number: KL00963

Read more less

Kegland Part number: KL02585

Read more less

Simply unscrew the normal spout on an Intertap faucet and screw this stout spout in its place to pour your nitro brews. This spout has a creamer/aerator disc inside that strips out the nitrogen gas for a creamier beer. For additional disc options, check out the 7-Disc Creamer/Aerator Kit. Compatible with Intertap and NukaTap faucets. Stainless Steel Construction Kegland Part number: KL01021

Read more less

The famous forward-sealing Perlick beer faucet, with the added feature of an integrated Flow Control valve!   Manage foaming issues when dispensing beer at home with this Perlick 650SS Beer Faucet with Flow Control. The new flow control feature makes it easy to reduce foaming no matter the type of beer line you’re using; leaving you with a nice, tall glass of crystal clear beer.    Constructed of 304 stainless steel to last a lifetime.   Buy two or more 650SS faucets from MoreBeer! and receive free shipping in the lower 48 states!   About Perlick Forward Sealing Beer Faucets: The #1 feature of the Perlick faucet is its forward sealing design. Why is that so important? An ordinary, rear-sealing faucet closes by pushing a shuttle against the faucet shank, at the rear of the faucet. So once the tap is closed the faucet is still full of beer that has to be drained out. There is actually a pin hole in the back of an ordinary faucet that allows beer to drain. Because of this design, leftover beer residue inside the faucet makes operation sticky and can harbor bacteria which harm your beer’s flavor as it flows through the faucet. In the Perlick faucet, with its Forward Sealing design, beer only has to drain from the short 1" nozzle section. This allows it to always operate smoothly (even when it was not cleaned between uses) and greatly reduces contamination!.  

Read more less

An Intertap accessory that converts the spout of an Intertap faucet into a ball lock quick disconnect. One of the most popular uses is being able to connect the beverage side of your counter pressure filler without having to open your refrigerator door. Compatible with Intertap and NukaTap faucets. Stainless Steel Construction Kegland Part number: KL01052

Read more less

Don’t mar up your faucet using the wrong wrench! This Beer Faucet Wrench will easily get the job done.  For the price, this faucet wrench is a no-brainer for anybody with a draft system.   This faucet wrench is used for installing and removing a faucet from a shank for cleaning. We encourage everyone who buys a faucet to buy a draft tool.  

Read more less

With this perfect-fit replacement gasket for your draft equipment, you’ll never have to experience the frustration of trying to “rig it” again.    This molded rubber beer line gasket is used anywhere you are mounting a tailpiece. It is placed between the tailpiece and the beer taps and/or shank.

Read more less

Life is too short to drink bad beer! Beer flavor gets funky when your tap, line and faucet are filled with beer stone--a left over gift from pints long  since poured. You do NOT want to share that with your friends!   Ideally you want to clean your lines after every keg, but at the very least cleaning them a few times a year (we like quarterly) will keep your brew pouring fresh and your friends asking for more! Our Draft Cleaning Kit comes with a 1 qt hand pump that pushes Beer Line Cleaner (4 oz size included) through your whole draft system. The faucet gets removed and cleaned with the included faucet wrench and brush. Perfect for cleaning home kegerators as well. 

Read more less

A new 5 lb CO2 tank is one of the required purchases when you’re changing over from bottling to kegging your beer.    This brand new 5 lb aluminum CO2 tank ships free in the 48 contigous states. Aluminum tanks will never rust, which is why we prefer them over steel tanks. The capacity refers to the amount of compressed (liquified) CO2 the tank can hold. 5 lbs of CO2 is enough to dispense 8 to 9 5-gallon kegs of homebrew.   All new CO2 tanks are shipped empty and will require either filling or exchanging for a full tank. Most local homebrew shops will stock gas to exchange, and many local welding supply companies can fill tanks on site.    CO2 tanks should always be stored in an upright position.   Dimensions: 14.33" Tall x 5.25" wide. 

Read more less

This handy adapter fits on standard keg couplers with its Female Beer Thread (5/8" BSP) and allows a ball lock connection on the beer side of the coupler. Made from 304 stainless steel. Kegland Part number: KL00840

Read more less

For you, The Discerning Kegger, these Perlick beer faucets are a thing of beauty. When you draw off a pint, they look good, operate smoothly, and don’t gum up. They are a breeze to take apart for sanitizing. These design benefits will have you sold on the lifetime value of these taps.   #1 Design Benefit - Forward Sealing The #1 feature of the Perlick faucet is its forward sealing design. Why is that so important? In an ordinary, rear-sealing faucet, the entire faucet must drain out of beer. There is actually a pin hole in the back of an ordinary faucet that allows beer to drain out. Because beer drains from the entire faucet the faucet remains sticky and is prone to contamination from the left over residue. The Perlick faucet, with its forward sealing design, only has beer drain from the short 1" nozzle section. This allows it to always operate smoothly (even when it was not cleaned between uses) and greatly reduces contamination.   #2 Design Benefit - Stainless Steel Standard old school faucets are made of brass that is plated in chrome. The chrome plating wears off and the Brass can pit. This can result in flavor contamination when your beer runs over exposed brass and pits which usually harbor bacteria.   In the late 90's, when the first stainless faucet was released, it cost close to $100. Wow. Now you can choose to get a traditional style faucet made out of stainless, but why would you bother when you can get this unique forward sealing design and stainless construction all in the same Perlick faucet?   Sure it costs a little more but you will never regret making the upgrade now.    

Read more less

This handy adapter fits on standard keg couplers with its Female Beer Thread (5/8" BSP) and allows a ball lock connection on the gas side of the coupler. Made from 304 stainless steel. Kegland Part number: KL00833

Read more less

The Pluto Beverage Gun is the ultimate hand held beer tap!  If you have been dispensing your draft beer out of a standard picnic tap, it's time to upgrade.  Definitely one of the coolest draft beer taps that we've seen, this Pluto Beverage Gun is made from nylon and stainless steel.  The body is plastic, while the barb, piston, and spring are all stainless.  Comes with a 1/4" duotight-compatible barb perfect for use with EVABarrier draft line. You will need either the 8mm x 6.5mm or 9.5mm x 6.5mm Duotight reducer to connect the EVABarrier to the Pluto. Kegland Part number: KL00956

Read more less

Finally, a high-quality, stainless steel, handheld faucet for discerning beer servers on the go! For too long there have been no other option than the standard plastic picnic tap. Torpedo Keg decided to fill the void with a top-shelf mobile draft faucet made with stainless components and internal parts. You'll feel the quality in the smooth pouring action and love the weight of it in your hand. This is definitely not the beer tap you used in college! 1/4" OD outlet barb will work well with 1/4" or 3/16" ID draft tubing.  

Read more less

Comes with a back nut, plastic collar, hex nut, and a 1/4" barb. Requires a 1" hole saw for installation. When set in place, the shank will only have about 2 1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 5-1/8" - Total Length (Tip to Tip) 4" - Shank Length (Without Nut & Barb) 3" - Thread Length 2-1/2" - Pass Through Length Kegland Part number: KL01113

Read more less

Serve beer on tap at home! A quality CO2 tank is a core component to any home draft system. Made from high-quality aluminum that will never rust like steel tanks Dispense up to 9 x five-gallon kegs of homebrew CGA320 valve pairs with standard US-style CO2 gas regulators KOMOS® offers a full suite of first-rate draft products and draft fittings—from kegs to faucets and everything in between! Standard 5 lb size is ideal for home draft applications—compact enough to fit inside you kegerator and won't need to be refilled too often Brand new aluminum 5 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 5 lb tank because it holds 5 lbs of compressed (liquified) CO2. 5 lbs of CO2 is enough to dispense about 8 to 9x 5-gallon kegs of homebrew. Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upright position. Features: Made from corrosion resistant, engineered Aluminum Brushed finish Thick, durable cylinder walls 18" T x 5.25 Ø DOT approved New high quality CGA-320 valve Light weight compared to steel tanks

Read more less

Comes with a back nut, plastic collar, hex nut, and 8 mm Duotight Adapter compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Requires a 1" hole saw for installation. When set in place, the shank will only have about 2 1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 5-1/8" - Total Length (Tip to Tip) 4" - Shank Length (Without Nut & Barb) 3" - Thread Length 2-1/2" - Pass Through Length Kegland Part number: KL11945

Read more less

Perfect addition when purchasing a new sanke style keg coupler or tap. New taps typically come with the correct fittings for your gas line but not your beverage line. These are those fittings! Used to connect 3/16" or 1/4" beer line. To connect 3/16" beer line tubing it is helpful to heat the tubing end in hot water.

Read more less

Serious homebrewers want only the best hardware touching their brew to prevent “off” flavors. This beer faucet shank is made from high quality 304 stainless steel.    This shank is sold as a complete kit and ready to install--just add tubing and a hose clamp. It comes with a back nut, plastic collar, hex nut, and a 1/4" barb. Requires a 1" hole saw for installation. Due to the length of the back nut and collar, the total wall width the shank can bridge once installed is about 2 3/4". Dimensions: 5-1/4" - Total Length (Tip to Tip) 4-1/4" - Shank Length (Without Nut & Nipple) 3" - Thread Length 2-3/4" - Pass Through Length  

Read more less

If your home draft system is a mix of ball lock kegs and commercial sanke kegs, having a coupler with ball lock adapters is a huge plus. This allows you to have all your draft lines ending in a ball lock quick disconnect, making it quick and easy to swap lines from sanke keg to ball lock. Note that the gas-in adapter has a small line cut into the body of the adapter where the bev-out adapter is smooth. The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port. D-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)  

Read more less

Replacement gaskets and o-rings for the Intertap SS and PC faucets Does not work with Intertap FC faucets or NukaTap faucets. Kegland Part number: KL01168

Read more less

Serve beer on tap at home! A quality CO2 tank is a core component to any home draft system. Fill at a local welding shop or swap out for a full tank at your local homebrew shop Made from high-quality aluminum that will never rust like steel tanks Dispense 18 x five-gallon kegs of homebrew Go with the larger 10 lb CO2 tank and extend the time between needing to refill or swap for a full tank This brand new, 10 lb aluminum CO2 tank ships free in the 48 contigous states, and because it is made of aluminum rather than steel you can feel confident that it will never rust. It’s called a 10 lb tank because it holds 10 lb of compressed (liquified) CO2. 10 lb of CO2 is enough to dispense 18 five gallon kegs of homebrew. All new CO2 tanks are shipped empty and will require either filling or exchanging for a full tank. Most local homebrew shops will stock gas to exchange, and many local welding supply companies can fill tanks on site. Dimensions: 20.75" Tall x 7" wide. NOTE: CO2 tanks should always be stored in an upright position.  

Read more less

Reduced first pour foam due to low thermal mass Forward-sealing design prevents beer residue from gumming up the faucet Unique shuttle design greatly improves laminar flow, improving the pour of carbonated beverages Compatible with all Intertap faucet accessories and shanks Matte Black painted finish. See note below. First Pour Foam Reduction Every kegerator owner knows the letdown of pouring your first pint of the day and getting too much foam. Even with perfectly balanced draft lines, first pour foam is sometimes unavoidable simply due to the temperature of the faucet itself. Running beer through the faucet will drop the temperature, and the foaming will subside, but not without a bit of wasted beer from pouring off excess head. The NukaTap Stealth Bomber beer faucet drops to beer serving temperature much faster thanks to its lower thermal mass. Simply put, the bulkier the faucet is, the more beer is needed to flow through and chill the tap. The NukaTap is over 20% lighter than its Intertap predecessor, and even lighter still compared to other brands of faucets. Improved Laminar Flow The inspiration for the NukaTap name comes from its uniquely designed "nuke-shaped" shuttle that resides on the inside of the faucet. The NukaShuttle went through numerous rounds of redesigns and countless hours of testing to find a shape that provides superior laminar flow. This means that liquid passes by the shuttle with very little resistance, allowing highly carbonated beers or hard seltzers to pour like a dream. Sanitary Design The NukaShuttle is the world’s first seamless single-piece design. Traditional taps feature an o-ring seated on a stainless steel shuttle, which can cause a couple of issues. After many pours, the stainless shuttle rubbing against the internal body of the faucet will create small fissures that become potential infection sites, and the seated o-ring can be difficult to clean in place, making your draft cleaning and sanitizing process less effective than you realize. The NukaShuttle is an advanced TPV rubber matrix that has been seamlessly formed over a durable PP skeleton. This single-piece design eliminates the pitfalls of older manufacturing methods, making it one of the most sanitary faucets on the market. Forward Sealing vs. Rear Sealing From tap rooms to home bars, forward-sealing faucets are the ideal choice for any draft setup. In traditional rear-sealing taps, beer will drain out of the entire faucet when it's in the closed position. This means the internal mechanism is coated in beer, which then dries and becomes a sticky residue. Forward-sealing faucets, on the other hand, keep the tap full of beer so it never has a chance to dry and gunk up the internal parts. This makes the faucet much easier to clean and also reduces the chance of off flavors transferring to your beer while you pour. Faucet body & lever made from stainless steel Shuttle made from TPV O-rings made from EPDM Lever collar & friction bonnet made from brass Matte black finish NSF approved Kegland Part Number: KL17978 Please note: this is a painted faucet and as such needs to be used, cleaned, and handled with care. Clean the faucet gently by hand and avoid tossing it into a bucket with other draft parts. Excessive soaking in caustic cleaners will damage the finish. For these reasons, we do not recommend the Stealth Bomber faucets for professional settings. If you prefer a stainless steel spout that can take more punishment, see the NukaTap Punisher Edition faucet.

Read more less

Reduce first pour foam by keeping your draft lines icy cold Extra thick neoprene insulates the tower, preventing excess temperature loss to the ambient environment Reduce cooling cycles and save power Customizable to your number and arrangement of faucets Tailor-made for KOMOS kegerators and works with most 3" draft towers The KOMOS draft tower sleeve is made from extra thick 7 mm neoprene, providing great insulation to your tower that will keep your draft lines icy cold. Although the KOMOS kegerators come standard with a tower cooling fan, the stainless steel tower will lose some of that coldness to the warmer ambient environment. By insulating the tower, you can minimize temperature loss, reduce cooling cycles, and saving power. This neoprene insulating tower sleeve will fit KOMOS kegerators like a glove, but can be used with most 3" draft towers. The sleeve comes without holes so it can be customized to fit your faucet arrangement, whether it be single, double, or triple tap. Also available in a size suitable for 4.5" diameter draft towers. Installation: Remove the faucets from the tower, keeping the shanks in place Pull the sleeve down over the tower Mark the position of the shanks and use a sharp pair of scissors to cut a hole in the sleeve Stretch the hole over the shanks and reattach the faucets  

Read more less