Don’t let this year’s wine harvest sneak up on you without having your tools ready. We carry a large selection of crushpad tools & accessories to not only get you through the harvest season but also make your life a little easier in the process. If you have any questions about any of our wine harvesting tools, give us a call or email.
Made from FDA-approved, food-grade plastic, these fermenters are ideal for the initial ferment of wine, especially red wines. 22.5" Tall by 20" diameter (25" in diameter including handles)
Photographed in picture with optional lid.
Food-Grade, FDA approved tubing with an outer spiral reinforcement "helix" ensures a kink-free transfer every time. Nutriflex tubing is made for transferring wine or must from container to container. The inside is smooth and without any crevasses for errant material to get caught in. Small bend radius means it will hold its shape even around tight corners. Working temperature range of -15F - 158F.
Inner Diameter - 1"
Outer Diameter - 1.33"
Please Note: Made to Order lengths have a lead time of approximately 2 weeks.
Specially designed for long-lasting use in demanding environments, each round Lavex bin is made of heavy-duty plastic resin. The resin is engineered to take a beating, making it strong and sturdy enough to withstand impact, while resisting cracking. NSF-listed and FDA-approved, the resin also makes each bin food-safe and ideal for bulk food storage.
32 gallon round food grade plastic container. Ideal for primary fermentation of grapes, and general storage.
A 32 gallon bucket will hold around 300 pounds of grapes, enough for about 18 gallons of finished wine.
NSF-listed and FDA-approved, the resin also makes each trash can food-safe and ideal for bulk food storage.
Made in America
Food-Grade, FDA approved tubing with an outer spiral reinforcement "helix" ensures a kink-free transfer every time. Nutriflex tubing is made for transferring wine or must from container to container. The inside is smooth and without any crevasses for errant material to get caught in. Small bend radius means it will hold its shape even around tight corners. Working temperature range of -15F - 158F.
Inner Diameter - 1.5"
Outer Diameter - 1.88"
White FDA approved food grade fermenters for the intitial ferment of wine, especially red wines. 24.25" round by 27.5" tall. (Handles stick out 2.5" on two sides)
A plastic filter basket that can be used to drain off small amounts of must. Allow the free run wine to flow through while you collect the skins for your grape press.
approx. dimensions are 10.25 inches in diameter, 5 inches tall, and 4.75 inches deep.
Made in Italy.
Picking shears are ideal for picking grapes. With plastic coated metal handles, and small curved metal jaws, they let you get into the canopy and drop the grape clusters easily and quickly.
Food-Grade, FDA approved tubing with an outer spiral reinforcement "helix" ensures a kink-free transfer every time. Nutriflex tubing is made for transferring wine or must from container to container. The inside is smooth and without any crevasses for errant material to get caught in. Small bend radius means it will hold its shape even around tight corners. Working temperature range of -15F - 158F.
Inner Diameter - 2"
Outer Diameter - 2.43"
Don't hurt your back lifting and moving fermenters of must that can weigh up to 150 pounds. This dolly is made from tough plastic and features five sturdy casters. It locks onto the bottom of our food grade wine fermenters allowing for easy transport.
Does not fit our 10 gal white plastic fermenter (WE505)
Food-Grade, FDA approved tubing with an outer spiral reinforcement "helix" ensures a kink-free transfer every time. Nutriflex tubing is made for transferring wine or must from container to container. The inside is smooth and without any crevasses for errant material to get caught in. Small bend radius means it will hold its shape even around tight corners. Working temperature range of -15F - 158F.
Inner Diameter - 3"
Outer Diameter - 3.56"
Imported grape picking bucket from Italy with a sturdy handle. Is more maneuverable than a 5 gallon bucket when trying to get in and around grapevines and is also much easier to carry. They do a lot of handpicking in Italy... they have it figured out!
*Basket color may vary
This is a very simple, but highly effective tool for picking grapes. Essentially a funnel that does not have a hole. Hold it one-handed underneath a grape bunch and clip off the grapes with your other hand. Way easier than holding a bucket where the handle, and your hand, are constantly in the way.
Made from FDA-approved, food-grade plastic, these fermenters are ideal for the initial ferment of wine, especially red wines. The 44 Gallon container is too large to ship via Fedex and must ship freight. Usually this is only feasible when combined with equipment we are already shipping for you.
The Hygienic Shovel was specifically created for the handling of grapes, must and pomace. The Solid One-Piece Shovel is tough, light-weight and easy to clean. Its large scoop allows you to quickly move grapes and must, and it won't damage or scratch stainless steel tanks and vats!
Made of high-grade polypropylene which is virtually unbreakable and immune to rust or rot, and has been approved under FDA regulations for direct food contact.
Ultra-durable plastic lid for the 20 gallon wine fermenter (WE515). Molded handles for quick, snap-on security that creates a tight seal.
NSF Certified. Made in America.
1.25" H x 19.875" D
Imported grape picking bucket from Italy with a sturdy handle. Is more maneuverable than a 5 gallon bucket when trying to get in and around grapevines and is also much easier to carry. They do a lot of handpicking in Italy... they have it figured out!
*Basket color may vary
Food-Grade, FDA approved tubing with an outer spiral reinforcement "helix" ensures a kink-free transfer every time. Nutriflex tubing is made for transferring wine or must from container to container. The inside is smooth and without any crevasses for errant material to get caught in. Small bend radius means it will hold its shape even around tight corners. Working temperature range of -15F - 158F.
Inner Diameter - 2.5"
Outer Diameter - 3.05"
Extreme Durability: Made from tough, commercial-grade resin built to last.
Secure Grip: Heavy-duty, built-in handles make lifting and transporting effortless.
Nesting Design: Stacks perfectly to save valuable floor space during storage.
Rugged Bottom: Reinforced base easily withstands repeated dragging over rough surfaces.
20-Gallon Size: Ample room for wine fermentations.
Made from food-grade plastic, these fermenters are ideal for the initial ferment of wine, especially red wines. NSF Certified. Made in America.
Tamperature rated from 0–190°F.
22.5" H x 19.5" D
Gently mix yeast, sulphite, and additives into your wine with this variable speed mixer. The stainless cart allows you to move the mixer up and down to the height of your tank fitting. Also adjust the angle of the mixer to accomodate inclined, reinforced mixing ports, like on our Speidel Stainless tanks.
How to Use:
Mixing ports enter through full port 2" TC ball valves to allow for an easily installation and disassembly. Position and attach the mixer to your 2" TC ball valve. Open the valve and slide in the adjustable mixing shaft, lock the shaft in position, and turn on. Adjust the speed to accomodate your desired level of agitation. To remove unlock shaft, slide out, turn off TC ball valve, and then disconnect mixer from TC ball valve.
For Use in Beer:
Wine tank mixers are perfect for mixing hops during dry hopping operations. Their use decreases the time needed to extract hop oils and lowers the amount of hops needed to get the same dry hopping level. This requires a horizontal port with a full port ball vale on the tank.
Features:
All parts in contact with the liquid are made of stainless steel AISI 304.
0.75 kw power, speed 0-1400 RPM
Single phase power supply
Rod length 650 mm
Width 155 mm propeller
Stainless cart
This universal mixer is perfect for any large scale mixing you need. The mixer allows installation and disassembly on full tanks without loss of liquid or use of tools! Requires that you have 2" Tri-Clamp Ball Valve installed on your mixing port.
Once the mixer is connected to the ball valve, the valve is opened and the adjustable shaft slides through into the wine. You can also pump chemicals straight through the mixer into your tank which helps prevent contamination and simplifies the mixing process.
This version does not come with the stainless steel trolley.
Features:
All parts in contact with the liquid are made of stainless steel AISI 304
1400 RPM
1hp/.75 kw motor
220v Single phase power required
Rod length 650 mm
Width 155 mm propeller
2" Tri Clamp
Gently mix yeast, sulphite, and additives into your wine with this variable speed mixer. The stainless cart allows you to move the mixer up and down to the height of your tank fitting. Also adjust the angle of the mixer to accomodate inclined, reinforced mixing ports, like on our Speidel Stainless tanks.
The included pump is a very unique feature that allows you to pump a slurry out of a bucket, into the mixer and into the tank. This saves time by not having to open the top hatch, reduces possible oxidation, and ensures a better mix.
How to Use
Mixing ports enter through full port 2" TC ball valves to allow for an easily installation and disassembly. Position and attach the mixer to your 2" TC ball valve. Open the valve and slide in the adjustable mixing shaft, lock the shaft in position, and turn on. Adjust the speed to accomodate your desired level of agitation. To remove unlock shaft, slide out, turn off TC ball valve, and then disconnect mixer from TC ball valve.
For Use in Beer:
Wine tank mixers are perfect for mixing hops during dry hopping operations. Their use decreases the time needed to extract hop oils and lowers the amount of hops needed to get the same dry hopping level. This requires a horizontal port with a full port ball vale on the tank.
Features:
All parts in contact with the liquid are made of stainless steel AISI 304.
0.75 kw power, speed 0-1400 RPM
Euro 20 pump included
Single phase power supply
Rod length 650 mm
Width 155 mm propeller
Stainless cart
Position under a wine press to separate solid material before pumping to your fermentation tank Remove seeds and oxygenate wine during a pump-over process Filter out seeds while moving wine from the fermentation tank to a holding tank A buffer tank or svinatore is used for several applications. During a press, during a pump-over and sometimes immediately following primary fermentation. The EnoItalia Buffer Tank is made entirely of 304 stainless steel and features a removable filter bed and 1.5" tri-clamp ferrule outlet. Mounted on caster wheels with a push cart handle for easy mobility from tank to tank around your winery. This unit is used under a press such as our 300L or 450L presses and also under red wine fermentation tanks in a pump-over process where the screen removes seeds and provides oxygenation during the initial parts of fermentation. Features: Tank and rolling cart frame made from stainless steel Removable filter made from stainless steel 1.5" T.C. outlet connection for pump Locking brake on all 4 casters 34 Gallon (130L) capacity Dimensions: 30.8" L x 25.75" W x 30.8" H (33.9" with wheels)
