An affordable option for your first keg or adding to your growing collection
These kegs are cleaned, de-labeled, sanitized, pressure tested and guaranteed to hold pressure upon delivery
Used kegs may have minor cosmetic damage but are in perfect working order
Rubber top and bottoms protect floors from dings
These Ball Lock Corny Kegs are a sturdy, reliable keg with the MoreBeer! seal of approval. These corny kegs are cleaned, de-labeled, sanitized, pressure tested and guaranteed to hold pressure upon delivery.
Every Ball Lock Cornelius Keg has a 5 gallon capacity and a rubber top and bottom. While these are used kegs with slight cosmetic damages, these light dings and scratches have no effect the keg’s performance. The relief valves, poppets and gaskets on these used kegs are not replaced before shipping, but we sell all of these items separately if you’d like to replace them yourself at home (part numbers KEG540, KEG450 & KEG500). If you’re looking for a truly economical way to serve your beer at home, this Ball Lock Cornelius Keg is a great option.
Used keg with minor cosmetic damage only
Ball lock corny kegs measure approximately 8.5" (diameter) x 25" (height) x 26 1/4" Height with flare fittings
Soda kegs may come with either 11/16 inch body connects or 7/8" body connects
Purchase deep sockets to remove body connects (part numbers KEG991 and KEG992)
Set of 4 used ball lock kegs and 4 complete o-ring rebuild kits
These kegs are cleaned, de-labeled, sanitized, pressure tested and guaranteed to hold pressure upon delivery
Used kegs may have minor cosmetic damage but are in perfect working order
Rubber top and bottoms protect floors from dings
Set of four used ball-lock kegs and four complete o-ring rebuild kits plus free shipping. Each rebuild kit includes 5 o-rings - one for the lid, 2 for the body connects, and 2 for the dip tubes. These ball lock keg 4 packs ship free, which means a great value for you!
A great price on unrebuilt ball lock kegs. To totally rebuild the keg you should also consider a new relief valve and poppets (part number listed below).
To clean the inside Alkaline Brewery Wash works great for eating away residue. We recommend taking these steps yourself before and after each use.
The body connnects on a keg are the metal posts where the quick disconnects attach too. They should be removed for cleaning and sanitizing before each use. Ball lock kegs can come with either 11/16" body connects or 7/8" body connects. We sell deep sockets for the removal of either one. So if you do not have these sockets at home and want to make sure you can disassemble the kegs you may want to purchase both sockets below. Then you will always be covered as your keg collection grows.
Ball lock corny kegs are approximately 8.5" Diam. x 25" Height. 26 1/4" Height with flare fittings. Measurements may vary slightly.
All kegs are pressure tested in our manufacturing facility and are guaranteed to hold pressure upon delivery.
US-05 produces clean and crispy ales with a well-balanced, neutral character Stays in suspension during fermentation for great attenuation Highly recommended for American ales and highly hopped beers Fermentis active dry yeast offers reliability, ease-of-use, and consistency to home and professional beverage makers across the world Formally US-56, US-05 is a strain of yeast that creates that classic American profile of clean malt, crisp taste, low diacetyl, and ability to ferment in a wide range of temps. Look for US-05 to be the next popular dried yeast. This yeast can be pitched directly, but if you prefer to rehydrate, the instructions are below. Sprinkle the yeast in a minimum of 10 times its weight of sterile water or wort (we suggest 4 oz) at 70°F to 77°F (21 to 25 °C). Do not stir. Leave to rest 15 to 30 minutes. Gently stir for 30 minutes, and pitch the resultant cream into the fermentation vessel. Attenuation: 78-82% Sedimentation Time: Medium Alcohol Tolerance: 9-11% ABV Optimum Fermentation Temp: 64-78°F Like Fermentis US-05 yeast? Then you will love CellarScience® CALI Yeast! *See the technical data sheet below for more information on rehydration, usage and storage.
The HI9146 is a rugged, portable dissolved oxygen (DO) meter designed to provide laboratory precision and accuracy under harsh environmental and industrial conditions. This meter offers many features including automatic calibration, auto-endpoint detection, and compensation for temperature, salinity and altitude. The HI9146 is supplied complete with polarographic probe, PTFE membrane caps, electrolyte fill solution, and rugged carrying case.
Easily Replaceable Membrane Caps
Automatic Calibration
Best suited for measuring DO during the fermentation/aging process in both beer and wine (not recommended for use during bottling, and cannot be used in carbonated beer).
Application Note
During the aging process, wine can range from 6-9mg/L and when bottled most wines should be below 1.25mg/L for Red and 0.6mg/L for white. Based on specifications, the HI9146W is well suited for use during the fermentation/aging process in both beer and wine, however it is not recommended for use during the bottling process.
Dissolved oxygen is a commonly measured parameter in wine analysis. The HI9146 is a rugged, portable dissolved oxygen (DO) meter designed to provide high accuracy measurements whether in the field or in the lab. The meter features automatic calibration performed at one or two points in saturated air and/or zero oxygen solution.All readings are automatically compensated for temperature variations and can be frozen on the display upon stability using the auto-end feature. Salinity and altitude compensation are user adjustable based on the environmental conditions that are present. The HI9146 features a Battery Error Prevention System (BEPS) that detects when the batteries become too weak to ensure reliable measurements. The HI9146 is supplied complete and ready to use.
Features at a Glance
Polarographic Measuring System
The meter and probe use polarographic sensor technology based on the Ross and Clark polarographic measurement method. The probe is comprised of a platinum cathode and silver anode in an electrolyte solution held in place over the surfaces of the electrodes by a polymer membrane. An external voltage applied across the system establishes a current proportional to the concentration of dissolved oxygen.
Replaceable Membrane Caps
The pretensioned thin polytetrafluoroethylene (PTFE) membranes employ a screw cap design that can be changed quickly by simply filling with the HI7041 electrolyte fill solution and screw on the DO probe.
Automatic Calibration - Calibration can be performed at one or two points to 100% and/or 0% saturation. The 100% saturation is done in air while the 0% is done with the HI7040 bicomponent zero oxygen solution.
Good Laboratory Practice (GLP)
The Good Laboratory Practice feature allows the user to recall calibration information including date, time and calibrations points.
Automatic Temperature Compensation - All readings are automatically compensated for temperature variations with a high accuracy, built in linearized thermistor temperature sensor behind a stainless steel cover.
Altitude Compensation
The HI9146 allows for altitude compensation for up to 4000 meters with a 100 meter resolution.
Salinity Compensation
Salinity compensation is adjustable from 0 to 80 g/L (ppt) with a 1 g/L resolution for the measurement of DO is brackish and seawater.
Auto End Point
The HI9146 features an auto endpoint mode in which when selected the reading will frozen on the display once a stable measurement is obtained. The auto-end feature allows for consistency among various users by ensuring that stability has been achieved before recording a measurement.
Backlit LCD
The HI9146 has a display with a backlight for easy viewing of readings in poor lighting conditions.
Battery Error Prevention System (BEPS)
The Battery Error Prevention System detects when the batteries become too weak to ensure reliable measurements. The backlight feature is automatically disabled when batteries are getting low and a clear indication is displayed to warn the user of this condition.
Thin Polarographic Dissolved Oxygen Probe for Wine
The HI76408 is a thinner Clark-type polarographic dissolved oxygen probe for Hanna’s benchtop and portable dissolved oxygen meters. The probe is constructed of durable ABS plastic and contains an integrated temperature sensor for temperature compensated measurements. It is compatible with our HI76407A/P PTFE membrane caps. Each membrane separates the probe’s platinum cathode and silver anode from the water sample being measured. Oxygen diffuses across the membrane and interacts with the polarographic system to produce a current proportional to oxygen concentration. Each cap is easily filled with HI7041 electrolyte and screwed on to the probe. The probe’s thin design makes it ideal for wine packaging measurements.
Rugged portable dissolved oxygen meter (DO meter).
Automatic Calibration.
Auto End Point mode which will freeze display once stable measurement is obtained.
Backlit LCD for easy view in poor lighting.
Note: This can only be used in uncarbonated beer.
This compact filter is designed for the home wine maker who is filtering 5-10 gallons at a time. Perfect for filtering wine concentrate kits. There is a small built in Flojet pump (self-priming, diaphragm pump) that can be used for racking from container to the next by bypassing the filter pads. You will not want to filter wine which contains solids such as stems or oak chips. This will clog the pump and void the warranty.
Takes three pads to load this filter. Does not come with filter pads.
The intake and outtake tubes are 3/8" and the drip tray tube is 1/4".
Far from your average coffeemaker, the Brazen Plus is a fully customizable unit allowing for total control over your brew.
The Brazen Plus brew system has features not found on any other consumer coffee maker. Settings are adjustable for water brewing temperature and pre-soak like found on many commercial brewers. Set your brewing temperature between 190–210°F / 90–99°C with accuracy to within 1-degree Fahrenheit. A patented feature allows temperature calibration with altitude correction. The oversized shower head and pulsed water flow ensure complete coffee bed saturation for terrific coffee extraction. Permanent filter included or use paper filters. Thermal carafe (SCA approved) with brew through lid keeps coffee hot. The Brazen Plus 3.0 is one of the very few that meet the Home Brewer certified by the Specialty Coffee Association of America to their standards.
3.0 Updates:
New Universal System Power Boards
New Program: revised Pulse Water Release Timing for better extraction
New Micro Controller: faster data refresh
Features:
Capacity: 1.2 Liter, 40oz, 8 (5oz) cups
Temperature Control: Set brewing temperature from 190–210°F (90–99°C)
Programmable Brew Start Time: Wake up to coffee with timed brew setting
Ideal Coffee Extraction: Coffee grounds are fully saturated due to oversized showerhead and pulsing of the water flow.
Elevation calibration: Adjust your brew temperature based on elevation to achieve a hot cup of coffee regardless of how far above sea level.
Thermal carafe with brew through lid keeps coffee hot (SCA approved)
Pre-soak setting allows the coffee to bloom before brewing for better flavor
Stainless steel water reservoir that’s easy to fill
Permanent gold filter included or use paper filters (10 cup for max benefit/ extraction)
Memory save: Settings remain, even if the power goes out.
Sleep mode: Saves power when not in use
Get to boil faster and increase boil vigor by retaining heat! Manage steam by turning it back into liquid that can later be used for cleaning/sanitizing Avoid the sticky residue that boiling wort can leave on your walls and ceiling Reduce the power consumption during the boil with your BrewZilla or DigiBoil Perfect accessory for indoor brewers! No need to install a special Range Hood to manage steam Made with the apartment and basement brewer in mind, this steam condenser set made from high quality 304 stainless steel will help you manage steam and condensation during the boil. Assembles in minutes and can be used with the BrewZilla or DigiBoil with the proper Distillation Lid and 2" T.C. weldless bulkhead. This setup will reduce heat loss, meaning you'll get to boil faster and use less energy overall to maintain a rolling boil. When it's time to add hops, yeast nutrients, or other additions, simply remove the tri-clamp end cap and drop them in. (Use gloves, it will be hot!). With the new Pro Sight Glass Distillation Lid, the condenser can be attached directly to the 35L unit's 2" T.C. ferrule or to the 65L unit's 4" T.C. ferrule using a 4" x 2" T.C. reducer. The Pro Distillation Lid also features a 3" sight glass disc that can be removed to address foaming issues or to add hops or other boil additions. If you've brewed indoors before, you're probably familiar with how sticky the evaporation coming off the boiling wort can be. The gummy layer of film it can leave behind on your painted walls and ceiling is no fun to clean up. And if you've been considering how to incorporate a range hood in your brewery to deal with the steam, now there's no need! Simply attach the Steam Condenser Set and run your kitchen tap or garden hose to the Duotight-compatible inlet. From the inlet, water will enter the column via a special spray head which can condense 0.42 gal (1.6 L) per minute while connected to 100 psi mains water. You'll find that a super-fast flow rate isn't necessary to cool boiling steam into liquid. Unlike the distillation process where the distillate needs to be under a certain temperature so that ethanol doesn't evaporate from the liquid at a high rate, with boiling wort you just need enough flow to form the steam back into liquid. Simple! After the steam is reformed into liquid, it will drain out of the bottom barb where you can install 3/8" ID silicone tubing. Recapture that water in a collection vessel and save it for cleaning and sanitizing! Once again, be aware that the water coming out will be very hot. Caution: You will need to remove the Steam Condenser when you reach boil to manage the hot break and ensure you don't have a boil over when you reach boiling temperatures. Once you've completed that step, you can reattach the Condenser and leave it in place for the remainder of the boil. Warning: It is important that the output tube for this steam condenser is open to atmosphere. This will allow the condensed steam to exit freely. DO NOT put a valve on the liquid output or restrict the condensed steam in any way as this may cause your brewery to develop vacuum and implode or explode.
DO NOT immerse the tube for the condensed steam in water. The outlet hose must be open to atmosphere and the drips of condensed steam must drip into your collection bucket freely.
You Will Also Need: Tri-Clamp Distillation Lid OR
Standard Distillation Lid for 35L or 65L BrewZilla / DigiBoil With 2" T.C. Weldless Bulkhead (H707) OR
Pro Distillation Lid for 35L or 65L BrewZilla / DigiBoil 35L Lid connects directly 65L Lid requires 4" x 2" TC Reducer 6.35 mm Monotight Adapter (or you can clamp directly to the inlet) 3/8" ID silicone tubing for the outlet Heat resistant brewing gloves Kit Includes: 5 x 2" Tri-Clamps 5 x 2" Tri-Clamp Silicone Seals 1 x 13.7" (340 mm) Long 2" T.C. Tee 1 x 7.8" (200 mm) Wide 2" T.C. Tee 1 x 2" T.C. End Cap 1 x 2" T.C. to 6.35 mm Duotight elbow cap with elongated spray head mister 1 x 2" T.C. x 0.47" (12 mm) Barb – Suitable for 3/8" (10 mm) ID Silicone tubing Some of these fittings are not sold separately
NOTE: The kit does not include the Duotight adapter and garden hose QD shown in the example photo. The text in the photo showing the Duotight compatible inlet elbow states 6.5 mm; it is actually 6.35 mm. KegLand Part Number: KL22842
The Copper Reflux Still Condenser is designed to create high percentage pure neutral spirit. It features a flow management device, which makes it extremely easy to use. No need to worry about fine tuning the water flow speed. As long as your providing enough coolant or cold water running through the condenser, the flow rate doesn't matter. The purity of the spirit can be controlled by two included flow control inserts. These brass inserts come with a 1.0mm hole and 0.6mm hole. As the hole gets smaller, the rate at which the spirit exits the condenser will decrease, thus increasing your reflux ratio and the purity of your spirit. If you want to make whiskeys and gins we recommend checking out the Copper Pot Still! This is only the still top and does not come with a boiler. Combine with a distillation lid to use a BrewZilla or DigiBoil as the base for this Alcoengine brand still top. Comes with 13 mm (0.51") barb connections for the water inlet and outlet. Kegland Part number: KL16162
The B80pro is a brewing system without compromise. Built for enthusiasts. 90-liter (23 gal) tank volume and 20kg (44 lb) malt capacity 30-80 liter (8-21 gal) pre-boil volume for flexibility 6kW heating power (2x3kW) utilizing two mains inputs makes heating and boiling fast High accuracy with 2 digital sensors Conical bottom with center draining for fast and easy cleaning Powerful control system with 7" touch-screen, Wifi and Bluetooth 4.2 The B80pro has an 80 liter (21 gal) boil capacity and about 20kg (44 lb) malt capacity. It is equipped with a powerful pump, which can be controlled from the touch-screen. The wort is circulated up through the center-pipe and the pump is fitted using Tri-Clamps making it very easy to remove, even when the tank is full. The malt pipe has latches that folds out when you lift it, so you can use both your hands for lifting. Sparging is done without tubes or pipes outside the tank. A sparge tube installed on the outside of the centerpipe follows the malt pipe when lifted also lifting the wort spreading device. This makes it very easy to sparge from a separate tank without making a mess. After brewing with the B80pro, you never have to turn it upside down for cleaning. The centerpipe is removed easily, and you can easily clean the unit, and all the trub will be drained directly to a bucket or the drains. Use the included circulation device as a CIP solution to save time and cleaning chemicals. The system has two digital temperature sensors - one in the bottom of the tank and one before the pump. The maxium static offset is ±0,5°C. The sensors can be individually calibrated for maximum accuracy. They have an accuracy of 0.1°C. It's also possible to connect a third sensor (accessory) to monitor the temperature of the wort returning from the counterflow cooler, so you can pump directly to the fermenter when the temperature is right. With powerful heating elements combining over 6kW (230V) of power, heating the water or wort is very fast. During the boil, the PID system is deactivated and you can adjust the power output to achieve the perfect rolling boil. You can also adjust the maximum current of each mains input, to 10, 13, 15 and 16 Amps, to make sure you never blow a fuse. All ports are 34mm Tri-Clamp fittings for maximum flexibility without leaks. As standard the system is shipped with one 3-way valve. All silicone tubes are 16x25mm food grade silicone. The control system is custom developed and features high quality electronics. The software is constantly being improved with new features. It is updated via WiFi. Specifications: Dimensions excl. packaging: 26.5" H x 24.4" W x 24.4" D Dimensions with one side valve: 26.5" H x 28.3 W x 24.4" D Dimensions with two valves: 26.5" H x 32.3 W x 24.4" D Packaging dimensions: 32.6" H x 24.4" W x 24.4" D Weight excl. packaging: 60 lbs Weight incl. packaging: 75 lbs Tank dimensions: Ø19.6", height 18.1" Tank volume: 23.7 gal (rec maximum boil volume – 21.1 gal) Malt pipe dimensions: Ø16.5", height 16.5" Malt pipe volume: 15.3 gal Max recommended grain quantity: 44 lbs Minimum liquid volume: 6.6 gal Build material: 1.0 mm stainless steel (SS304) Heating elements: 230V, 6000W (2x3000W) Pump: 24VDC brushless, max 6.6 gal/min, max head 14.7 ft, stainless steel head, stepless speed control from touch display Controller: ARM Cortex M4 180mhz, 7" Touch display Connectivity: WiFi 802.11 b/g/n, Bluetooth 4.2, MicroSD Hoses: 16x25mm silicone, food grade What's included: Complete brewing system with controller, pump, tank sensor, heaters and lid Malt pipe with handle and latches 1 pcs expanded metal filter 1 pcs 3-way valve Temperature sensor with adapter for pump line 5 pcs 34mm Tri Clamps with gaskets (all used for standard setup) 3 pcs 34mm TC blind caps 1 pcs dip tube, short type 1 pcs mash hat for spreading the wort 1 pcs sparge tube 150cm 16x25mm silicone tube 1 pcs 34mm TC to 19mm hose barb adapter O-rings for the center pipe and dip tube 2 Nema 6-20 power cables, 2 meter 5 year manufacturer's warranty
Please note that some parts of Brewtools systems are made by hand, and might have some minor cosmetic imperfections. This will not affect the functionality of the product. For User Manuals and support, please follow this link to Brewtools Docs.
Vacuum pump wine bottle filler with 180 bottle per hour filing capacity
Automatically starts siphon and shuts off when the bottle is filled
Oxygen is evacuated from each bottle before filling
Adjustable fill speed to match your preferred pace
Fill wine bottles directly from your fermenter, storage tank, or barrel
The Enolmatic filler with vacuum pump transfers the wine very gently, and fills your bottles to the perfect level every time. The vacuum pump depressurizes the reservoir, which then pulls your wine through the filler tube and into the bottles. The wine never touches the pump. It is very gentle, consistent, and easy to use.
110V 60 Hz 60 W
Made from high-quality Slavonian oak sustainably sourced from Hungarian forests
Superior in long term storage due to the tight grain and slow release of phenolic compounds
Equivalent or superior quality compared to French Oak barrels at a much more affordable cost
Zinc-plated steel barrel hoops for corrosion resistance
Coopered by the world-renowned Balazs Nagy
Balazs barrels is a long-trusted brand of Hungarian oak barrels coopered by the famous Balazs Nagy. These barrels are equal or better in quality to French Oak barrels but available at a fraction of the cost of their more famous counterparts. Renowned for respecting fruit, Hungarian barrels offer winemakers a great option to impact the mouthfeel, structure and flavor of wine without stepping on the terroir of your grapes.
Due to the tight grain and slow release of phenolic compounds, you can feel secure storing your wine in Hungarian barrels longer than you can with other barrels. The slow process of micro oxygenation rounds the wine while various compounds in the wood such hemicellulose, lipids, and lignins are slowly integrated.
As most barrel makers know, the best source of wood for wine barrels is the oak grown in the territory of old-time Hungary, known as Slavonian oak. This rare, high-quality oak can be found in the Zemplén Mountains and in the Tokaj oak woods. The specific type of oak in those territories, and what is used in Balazs barrels, is the Quercus Petrea. This oak is characterised by a dense, hard structure combined with extra flavor. Forestry workers look after these forests with considerable expertise, and the forest density ratio in Hungary is 20–24%, with selective logging taking place between November and April. Once the wood is sourced, it is air dried and aged for 24-28 months before cooperage.
Balázs Barrels is establishing a direct cooperation with the forestry workers, ensuring the continuous supply of the best quality oak, allowing them to source and work with the most excellent oak for wine barrel manufacturing from the foremost Hungarian forests.
10 L (2.64 gal)
Height - 13.58"
Head Diameter - 8.26"
Abdomen Diameter - 10.23"
Stave Thickness - 0.51 - 0.71"
Bung Hole - 20 mm
Empty Weight - 9.9 lbs
Mild Toast
Barrel hoops made from zinc-plated steel for corrosion resistance
Rack included
Kit for dryhopping and adding other ingredients to a pressurized fermenter without oxygen. This is the correct size for the Brewtools F150 Unitank.
Included in the box:
Butterfly-valve, TC 4"
TC Adapter, 4" til 34mm
TC Pipe, 4", L=200mm
Tri Clamp, 4" (2 pcs)
Tri Clamp, 34mm (3 pcs)
TC34mm Manual PRV
TC34mm Ball Lock connector, Gas
TC Tee, 34mm, L=60mm
TC Gasket, 4", (3 pcs)
TC Gasket, 34mm DN20, 5-pack
The volume of the HopDrop Kit is 1.5L. Pellet capacity in weight will vary
Adjustable filling height with automatic stop
Stainless steel base, frame, and filling nozzles
Adjustable filling level and filling speed
Vacuum gauge
The Ultrafiller 2 is built entirely in stainless steel with PYREX tank, featuring two high efficiency and precision stainless steel filling nozzles. This professional bottling machine is perfect for wine, uncarbonated beer or cider, spirits, and oils. When you place the bottle under the Ultrafiller 2, the fluid is sucked into the vacuum created inside it, without any contact between the liquid and the pumps or mechanical components.
Why Choose ILTEC
While the Enolmatic has served as a great economical option, the ILTEC offers a significant step up in overall quality and durability. The key differences speak for themselves:
Stainless Steel Construction: Unlike the Enolmatic's plastic components, the ILTEC boasts a robust stainless steel construction, ensuring long-lasting performance and easy sanitation.
Borosilicate Vacuum Chamber: The ILTEC utilizes a borosilicate vacuum chamber, a superior alternative to the plastic chamber found in the Enolmatic. Borosilicate glass is known for its exceptional resistance to thermal shock and chemical corrosion, guaranteeing a cleaner and more efficient filling process.
The ILTEC filler isn't just about superior materials; it's about delivering consistent, precise, and professional results. Whether you're bottling wine, spirits, oils, or other liquids, the ILTEC provides the performance you demand.
Specs:
Capacity: 400 x 750mL bottles per hour*
Bottle Neck Diameter: 16-34mm
Bottle Height: 7" to 13.75" (180-350mm)
Tank Alcohol Tolerance: 80% ABV
Max Temperature: 176°F (80°C)
Dimensions: 13" x 21.6" 16.5" (330 x 550 x 420mm)
Weight: 42.3 lbs
Power: Compressed Air
*Capacity may change depending on liquid and bottle size.
Safe and easy operation compared to handheld shrink guns
Shrink capsules adhere quickly, simply slide the bottle into position then remove immediately
Made from stainless steel for longevity and easy cleaning
800W power
The safest and most simple solution to applying heat shrink capsules to your wine bottles. The horizontal heat shrinker allows you to keep your hands free and clear of the heating element during operation. Shrinking only takes a moment—simply slide the bottle into position and then quickly remove it. Stainless steel construction for easy cleaning. On/Off switch. 800 Watt / 110V.
Keep the party flowin' with a KOMOS Jockey Box! The eye-catching stainless steel exterior isn't the only thing that distinguishes this beauty from ordinary jockey boxes. With forward-sealing Intertap faucets and all-stainless 50-foot draft coils, the KOMOS Jockey Box was designed from the ground up to keep your beer pouring with less foam for longer. These units with front entry design are perfect for serving from behind a bar. Instead of having the draft lines entering on one side and the faucets pouring from the other, these draft boxes have everything on the same side you'll be pouring from.
KOMOS Stainless Steel Jockey Box
Front off setting inlets for better access for pouring
100% stainless steel draft coils
Shanks & coils are custom designed for proper cooling and flawless pouring
The only draft box that uses stainless steel Intertap forward sealing faucets
Push-In coil design applies force toward shank connection to protect against shank and coil separation
Stainless steel Shank Plates protects the cooler from being damaged when tightening faucets and shanks
Stainless Steel construction on all serving components means this box will last for years
Premium Stainless Steel Cooler provides superior ice retention
Pairs perfectly with a KOMOS Connection Kit
Features:
54 Quart Stainless Steel Cooler
50’ Stainless Steel Coils (5/16” OD)
Stainless Steel Faucet Shanks
Stainless Steel Pass Through Shanks
Stainless Steel Flanges
Stainless Steel Forward Sealing Faucets
Black Tap Handles
Stainless Steel Shank Plates (inner & outer)
25" L x 18" W x 17.75" H
Weight: 32 lbs
Cork up to 400 bottles per hour with the StarCap pneumatic corking machine
Air-driven semi-automatic bottle corker makes the process efficient and effortless
Compatible with all natural, agglomerated, collated, and 1+1 agglomerated corks
Air pressure regulator with manometer allows for pressure adjustments depending on the cork being used
Made in Italy by Tenco
The StarCap semi-automatic bottle corker from Tenco provides excellent corking capacity for small wineries or avid home vintners. It is pneumatically driven so you will need an air compressor to operate the corking action. Wine corks are manually inserted into the cone then, by pressing the two start buttons, the cork is inserted into the bottle neck of the wine bottle by slightly compressing the cork. The StarCap machine guarantees perfect integrity, doesn’t create seems on the surface, and doesn’t affect the material in any way.
Specifications:
Capacity: 400 bottles/hour
Power: Compressed Air
Air Connection: Push-to-connect fitting for 8mm (5/16") OD rigid tubing
Can be converted to barb with 1/4" BSPP male threaded adapter
Max Diameter: 25 mm
Max Height: 45 mm
Minimum Bottle Height: 200 mm
Max Bottle Height: 370 mm
Compatible Corks: Natural, agglomerated, collated, 1+1 agglomeration
Cork up to 400 bottles per hour with the StarCap pneumatic corking machine
Air-driven semi-automatic bottle corker makes the process efficient and effortless
Compatible with all natural, agglomerated, collated, and 1+1 agglomerated corks
Air pressure regulator with manometer allows for pressure adjustments depending on the cork being used
Made in Italy by Tenco
The StarCap semi-automatic bottle corker from Tenco provides excellent corking capacity for small wineries or avid home vintners. It is pneumatically driven so you will need an air compressor to operate the corking action. Wine corks are manually inserted into the cone then, by pressing the two start buttons, the cork is inserted into the bottle neck of the wine bottle by slightly compressing the cork. The StarCap machine guarantees perfect integrity, doesn’t create seems on the surface, and doesn’t affect the material in any way.
Specifications:
Capacity: 400 bottles/hour
Power: Compressed Air
Air Connection: Push-to-connect fitting for 8mm (5/16") OD rigid tubing
Can be converted to barb with 1/4" BSPP male threaded adapter
Max Diameter: 25 mm
Max Height: 45 mm
Minimum Bottle Height: 200 mm
Max Bottle Height: 370 mm
Compatible Corks: Natural, agglomerated, collated, 1+1 agglomeration
Instant and infinite sparkling water at your fingertips whenever you want it! Benchy connects to your household's water supply, chills, carbonates, and delivers on demand Serve up to 8 gallons of chilled, carbonated water per hour Pair with draft faucets and place it on your counter, or install it under the counter and plumb it to a mounted water faucet See below for detailed installation video Benchy Sparkling is the answer for instant chilled and carbonated water on demand. Simply connect your household water supply and CO2 Cylinder to the unit and receive unlimited sparkling and chilled water from the draft faucets. The chiller is highly efficient with very little power draw while idle and has enough cooling capacity to serve up to 8 gallons of sparkling water per hour. This unit comes without shanks or draft faucets, as it can be used as a countertop unit or installed under your counter and routed to a faucet you install on your counter or kitchen sink. If you plan to use it as a countertop unit, we highly recommend NukaTap Flow Control Faucets. Easy Installation: Plug the Benchy into the wall Fill internal water tank Connect household water supply Connect CO2 Cylinder Pour chilled sparking water. It's that simple and you can be enjoying chilled sparkling water in under 1 hour with this setup and barely any time at all to cool down. Ensure that the unit is installed and operated according to the instruction manual which can be found below. Fully Adjustable The Benchy Sparkling has an integrated digital temp controller so you can control the temperature from 0.5-10°C (33-50°F). You can also vary the carbonation level from 0.5 volumes to over 5 volumes for super bubbly water. Cooling Performance The Benchy Sparkling is able to chill about 5 to 8 gallons of sparkling water per hour (based on ambient water and air temperature of 68°F). To further increase the capacity of this unit, you can pre-chill the water from your household supply line either by a holding tank (ball lock keg) in the fridge or a DraftMaster Chiller. If you pre-chill the water you can more than double the output of the Benchy Sparkling. The reservoir temperature on the Benchy should never be set below 2°C (35°F) as you will run the risk of freezing the water inside the carbonation keg. Specifications: 110V Refrigerant: r600a (80 grams) Cooling Power: 600 watts Power Consumption: 155 watts (idle power consumption less than 5 watts) Capacity: approximately 6.6 gal/hour (based on 68°F ambient temperature) Input Gas: CO2 @ 29-50 psi (Requires 8mm (5/16") OD tubing) Input Water: Must be 15 psi higher than gas pressure (Requires 6.35mm (1/4") OD tubing) Sparkling/Chilled Water Out: Requires 8mm (5/16") OD tubing Dimensions: 18.3" H x 11.4" W x 20.5" D (Excluding sight glass that can be removed) Recommended Accessories: CO2 Gas Cylinder CO2 Regulator EVABarrier 4mm x 8mm Tubing PE Water Line Tubing 6.35mm Duotight In-Line Regulator (0-150 psi) Duotight Reducer - 8mm x 6.35mm 8mm Duotight Check Valve Diverter Valve (check water line connection for the size you'll need) Countertop Installation Recommended Accessories: (2) Short Shanks & Hex Nuts (2) Duotight Adapters - Beer Thread x 8mm (2) NukaTap FC Faucets& Self Closing Springs (2) Tap Handles (of your choice) Tube Cutter Faucet & Shank Wrench KegLand Part Number: KL2068
Motorized unit crushes grapes and separates stems in one pass All parts that come into contact with the grapes are made from stainless steel Screw Feed provides fast, continual hands-free operation Self-adjusting rubber rollers are soft on grape stems to reduce tannin extraction 3,000 lbs per hour production capacity Made in Italy by EnoItalia A great value in our motorized Crusher Destemmer line as the parts that are in direct contact with the grapes are stainless while the main body and motor/gear shroud are made from enamel coated steel. Performance is exactly the same as our WE223S Model. The Crusher/Destemmer can be purchased by itself or alongside the Stainless Stand & Chute. How These Work: Grapes are loaded into the top bin where the powered screw feed continually pushes grapes towards the rollers. Grapes are gently crushed by the rubber rollers and then fall into the destemming chamber. The destemming chamber features a removable basket with a bunch of circular holes in it and rotating destemming shaft. Grapes fall through the holes into your bucket. Stems get rotated through the basket by the destemming shaft until they exit at the end of the machine where they fall onto the ground or an awaiting bucket. Rubber Rollers This model features soft rubber rollers which are softer on stems possibly reducing rough tannins in your wine. The rollers are spring loaded and self adjusting to protect against damage, such as the accidental passing of a small stone. Output Production Powered by a 1hp motor that provides an hourly production of approximately of up to 3,000 lbs. Note that these machines must be fed with consistency to reach maximum throughput. Overload the machine with too many grapes at one time and the motor will pause and actually slow down production. Cleaning Remove two quick bolts and the safety cover slides off and the internal stainless destemming grate slides out for easy cleaning. The hose out the rest of the unit. Comes with directions. WE223PS Features: 1) 304-Type Stainless Steel Receiving Bin, Screw Feed, and Destemming Basket 2) A Screw Feed drive receiving bin for continual, faster, hands-free operation 3) Adjustabe Rubber Rollers (adjustment on all small machines, regardless of make, is limited to 5mm because of the way the gears mesh.) 4) Solid Construction 5) A powerful 110V 1HP motor which provides an hourly production of approximately 3000 lbs. 6) Replacement parts are available 7) Big, Red Emergency stop button on motor shuts down the machine in a hurry to help reduce chance of accident Overall dimensions: 47" long x 19.6" wide x 25" high. Weight: 118 pounds (54KG.) Figure 158 lbs for shipping weight with pallet.
Versatile Corking: Handles both champagne and standard corks, accommodating a wide range of bottle diameters (up to 4.72") and heights (9.44" to 15.35")
Heavy-Duty Stability: Robust 20.9 lb construction provides a stable platform for effortless and consistent corking
Professional-Grade Seal: Ensures a tight, secure cork every time, ideal for preserving the quality of sparkling wines and other bottled beverages
Effortlessly seal your sparkling creations with the Grifo Champagne Bottle Floor Corker. This robust corker provides professional-grade sealing for both champagne and standard corks, accommodating a wide range of bottle sizes. Designed for stability and ease of use, it ensures a perfect, secure cork every time. Ideal for home winemakers and small-scale producers.
Specs:
Bottle Max. Diameter: 4.72" (120mm)
Bottle Min. Height: 9.44" (240mm)
Bottle Max. Height: 15.35" (390mm)
Suitable for Champagne Corks:
Max. Diameter: 1.2" (30.5mm)
Max. Height: 1.88" (48mm)
Suitable for Standard Corks
Max. Diameter: 1.18" (30mm)
Max. Height: 1.57" (40mm)
Chrome Jaws
Dimensions: 25.6" x 17.7" x 35.4"
Weight: 20.9 lbs
Brand-new stainless steel beer keg with US-standard MicroMatic D System Spear
Sixth Barrel Keg holds 55x 12 oz beers or 41x 16 oz pints
Compact and easy to fit multiple kegs in home kegerators or keezers
Commercial quality construction—produced and tested in an ISO 9001 Certified facility
Supply your brewery with the best kegs on the market with these 5.16 gallon 1/6 Barrel US Sanke Kegs. Our kegs are produced and tested for quality in an ISO 9001 Certified facility, abiding by strict quality control standards. Each keg is constructed entirely of Stainless Steel, ensuring a long serving life for your brewery.
The sixth barrel keg, commonly referred to as a sixtel keg, is a great option for bars and restaurants that want to offer a variety of beers but don't have the space for multiple full size kegs. They're also a great option for kegerators, as two or three sixtels will fit inside depending on the model.
Holds 55 x 12 oz beers (41 x 16 oz pints).
Features:
5.16 gal (1/6 bbl) US Sanke keg
304 Stainless Steel Construction
23" Height, 9.25" Diameter
MicroMatic D System (U.S. Sankey) Spear
Working pressure is 43.51 psi (3.0bar)
Self-priming stainless steel impeller pump with for moving wine or beer Cast stainless pump head with 1.5" tri-clamp connections On/off switch for easy operation 11 gallons per minute reversible flow rate Made in Italy by EnoItalia Centrifugal pump with cast stainless head. 1.5" T.C. inlet and outlet. Self-Priming. Reversible direction. Stainless impeller. Best used for transferring wine or beer between tanks. Specifications 11 GPM Max Pressure: 15.9 PSI (1.1 BAR) 1.5" Tri-clamp fittings Single Speed 1400RPM 194°F Max Temp Rating 14 LBS 12.6"x9.5"x7" 110V Note: Because this product is manufactured in Europe, it will come with a European plug. You will need to re-wire for use in the USA. Please see our European Equipment Wiring Colors guide for instructions on how to convert to a domestic plug.
Self-priming stainless steel impeller pump with for moving wine or beer Cast stainless pump head with 1.5" tri-clamp connections On/off switch for easy operation 11 gallons per minute reversible flow rate Made in Italy by EnoItalia Centrifugal pump with cast stainless head. 1.5" T.C. inlet and outlet. Self-Priming. Reversible direction. Stainless impeller. Best used for transferring wine or beer between tanks. Specifications 11 GPM Max Pressure: 15.9 PSI (1.1 BAR) 1.5" Tri-clamp fittings Single Speed 1400RPM 194°F Max Temp Rating 14 LBS 12.6"x9.5"x7" 110V Note: Because this product is manufactured in Europe, it will come with a European plug. You will need to re-wire for use in the USA. Please see our European Equipment Wiring Colors guide for instructions on how to convert to a domestic plug.
Self-priming flexible impeller pump for moving wine or juice
Stainless steel pump head with 1.5" tri-clamp connections
On/off switch for easy operation
19.8 gallons per minute flow rate
Stainless bypass for reducing flow rate
Made in Italy by EnoItalia
The Euro 30 is a great versatile winery pump for all around cellar needs. The sanitary connections are 1.5" TC to allow for easy hook up of hoses, filters, fillers, you name it. With the included SS Bypass, you can reduce flow rates up to 25%. SS head means easy maintenance, and a power switch on the body keeps all necessary controls conveniently accessible.
Features:
Flow rate is 19.8 gpm
Max Pressure: 40 PSI (2.8 BAR)
1.5" Tri-Clover inlet and outlet
220 v single phase Input Voltage Required (6.5 amp draw)
1.5 HP motor
Self-priming
Recommended temperature range: 40 - 150°F (5 - 65°C)
SS Bypass for reducing flow
SS head w/ flexible impeller
220v bare cord - You will need to wire on the appropriate 220v plug
Please Note: This item may come with a bare cord or with a European style plug. You will need a professional electrician to wire the pump with the appropriate plug.
Serve beer on tap at home! A quality CO2 tank is a core component to any home draft system.
Made from high-quality aluminum that will never rust like steel tanks
Dispense up to 9 x five-gallon kegs of homebrew
CGA320 valve pairs with standard US-style CO2 gas regulators
KOMOS® offers a full suite of first-rate draft products and draft fittings—from kegs to faucets and everything in between!
Standard 5 lb size is ideal for home draft applications—compact enough to fit inside you kegerator and won't need to be refilled too often
Brand new aluminum 5 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 5 lb tank because it holds 5 lbs of compressed (liquified) CO2. 5 lbs of CO2 is enough to dispense about 8 to 9x 5-gallon kegs of homebrew.
Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder.
Tanks should always be stored in an upright position.
Features:
Made from corrosion resistant, engineered Aluminum
Brushed finish
Thick, durable cylinder walls
18" T x 5.25 Ø
DOT approved
New high quality CGA-320 valve
Light weight compared to steel tanks
This magnetic drive pump is a perfect pump for your brew system. Use it to move hot wort in an all-grain system and also to transfer wort from boil kettle to fermenter. The housing of the unit is made from tough, food grade food-grade heat-resistant SPS. The magnetic drive allows you to slow down the flow without damaging the pump. This pump is not self priming so do not run the pump dry. The pump head can be rotated in 60-degree increments, allowing for 6 different pump head orientations. Optional stainless steel pump head upgrades available—standard stainless center inlet head or stainless inline tri-clamp head. Want More! power? Check out this pump's bigger brother, the 60-Watt MKII. Features: 110v/60hz Max Head: 11.15 ft. (3.4 m) Max Flow: 5 Gal/min (19L/min) 1/2" BSP fittings Rotatable pump head Max temperature - 248 F/ 120 C Water resistant (not proof!) casing Kegland Part Number: KL05470
Used – Refurbished
This unit is used. It has been restored to working order. It will have cosmetic defects and show signs of previous use.
It is still covered by our No Hassle Return Policy and 1 Year Warranty Policy.
A 3-Phase Crush Pad Specific must pump that transfers crushed grapes from your Destemmer Crusher to your tank or bin. Entire pump is on wheels and will slide under the Jolly 40 or Jolly 60 Destemmer Crusher. Grapes would fall into the awaiting stainless hopper. Stainless screw moves grapes into the eliptical, paddle style must pump that then moves them through 3" tubing to final destination. Considered more gentle than using a rubber impeller must pump. Only available in 3 phase power.
Details
Power: 2.5 HP Three Phase 220 v draws 4.7 amps
Capacity: 12,000 to 16,000 pounds per hour
Shaft Speed: 47-58RPM
Out Let Barb: 3" Tri-Clamp
Max Discharge Height: 9 feet
Max Discharge Distance: 30 feet
Weight: 220 Pounds
Pump Body: Stainless Steel
Loading Hopper & Screw: Stainless Steel
Refillable automatic lubricator
Hinged discharge cone can be opened for inspection
The ultimate control & precision of your fermentation process. Equipped with four built-in temperature controllers and pumps, this advanced chiller enables you to independently regulate the temperature of multiple separate fermentation vessels simultaneously, ensuring optimal conditions for different batches or styles of beer, making it a game-changer for homebrewers.
4 Built-in pumps and digital controllers
Control multiple fermentation temperatures independently Fill with 20% glycol solution for optimal chilling performance Cold crash with good insulation Perfect complement to BrewBuilt X-Series Conicals The IceMaster Max 4 is designed to cool fermentations in small vessels. It features 4 built-in submersible pumps with independent digital temperature controllers and can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. Each controller includes a temperature probe that should be inserted into a thermowell in your vessel or can be taped to the outside of the vessel if you don't have a thermowell. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to four tanks can be controlled separately with one IceMaster Max 4. Compatibility The IceMaster can be used with any fermenter that has a built-in cooling jacket, added CoolStix, or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters. BrewBuilt Jacketed Uni Conical - we recommend one Insulated Tubing Kit for each tank. These kits feature "dry break" quick disconnects that prevent glycol loss and the insulated tubing will increase chilling efficiency and eliminate line sweating from condensation. CoolStix - CoolStix can be added to a wide range of carboys, fermenters, and tanks and the IceMaster works really well in combination. Each CoolStix is available with or without a pump kit; for use with the IceMaster Max 4 you will only need the CoolStix and some tubing to connect it to the chiller. Ss Brewtech Fermenters and Brites - Ss BME Chronicals, BME Brites, and Unitanks come with cooling coils and neoprene as standard. The optional chilling FTSs will not be needed for use with the Max 4. The cooling coil for standard Ss Chronicals and Brew Buckets are not sold a la carte and must be purchased with a submersible pump, which is not needed for the Max 4. For standard Chronicals and Brew Buckets you might consider the IceMaster 100 for cost savings. Spike Conical with Optional Cooling Coil - the cooling coil for Spike CF series conicals is available for purchase independently from the TC-100 cooling system. For use with the Max 4 you will only need the coil and some tubing to connect it to the chiller. Speidel Tanks with Optional Cooling Jackets - You will need two lengths of tubing to connect the chiller to each tank. Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need two lengths of tubing for each fermenter. Blichmann Fermenators with Optional Cooling Coil - You will need two lengths of tubing for each Fermenator. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75°F ambient and neoprene insulation. Neoprene provides a modest amount of insulation so you would obtain better results using Armaflex or a higher R rated insulation. Capacity calculated at cold crashing to a target temperature of 38°F while the ambient temperature is 75°F with neoprene insulation (double tank capacity for ale fermentation temperature control): 2 - 1BBL (31 Gallon) Jacketed Tank 2 - 1/2BBL (15-20 Gallon) Tanks 3 - 10-14 Gallon Tanks 4 - 5-7 Gallon Tanks Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 2 lengths of tubing per vessel. All tubing connections should be secured with hose clamps. Length 1: Barb of 1st bulkhead (IN) to cooling system outlet
Length 2: Barb of 2nd bulkhead (OUT) to cooling system inlet
Specifications: 4 built-in submersible pumps with independent digital controllers Pump controllers read in °F/°C Temperature controller reads in °C Labeled IN and OUT stainless bulkheads with 3/8" OD barbs Tank Capacity: 30L/8 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 780 Watt/2600btu/0.26 ton Refrigerant: R134a Voltage: 110V (3.6 amps) Dimensions: 16.1" x 16.1" x 26" Wheels included CE Certified Max Head: 21.3 ft (6.5 m) Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid June.
The perfect pump for use after fermentation! Self-priming and easy to use for transfers between carboys or kegs
Included pre-filter removes solids from your liquid and features a quick disconnect design to easily remove the filter for cleaning
Adjustable flow rate from 0 to 3 gallons for gentle transfers and slowly pushing finished beer through plate filters
Diaphragm pumps are gentle on the liquid passing through them with much less turbulence and aeration compared to magnetic drive pumps
The Vintage Shop has been a pioneer in the manufacturing of products for the home wine and beer industry since 1969
Includes tubing and clamps—ready to use out of the box!
Why This is a Great Pump:
Self-Priming
Heat Tolerant materials to 212°F when used with Silicone tubing
Speed Control!
Gentle Diaphragm Design
Self Priming: This pump is capable of pumping gasses, meaning that pumping does not require priming! This makes transfers between carboys or kegs incredibly easy. Simply put both inlet and outlet hoses in a bucket of sanitizer and run the pump for a minute. You're then good to transfer your beer with your sanitized pump!
Removable Pre-Filter: This is something which is almost always necessary on diaphragm pumps, as the diaphragm itself is very delicate, and can be ruined by small solids. The pre-filter included on this pump will work to keep solids out of the pump, extending the working life of the unit. And the filter can be removed between uses for cleaning.
Heat Tolerant: All materials used in the construction of the pump tolerate temperatures up to 212°F when used with heat tolerant tubing such as silicone. Because the pump comes with vinyl tubing you would need to replace that tubing with silicone.
Speed Control: Perhaps the most unique feature is a dial control to adjust flow from 0 to 3 gallons per minute. Use it to send your wort from the kettle to the fermenter, or even after fermentation to send beer through a plate filter (such as our FIL45).
Gentle on your Beer: A diaphragm pump works by moving beer through one pulsating diaphragm into the next. It is a design that is very gentle on the liquid being pumped.
When this pump was first introduced to us, we loved the idea, but had concerns that the speed control would compromise the longevity of the motor. We've built much larger pumps and normally you need a $700 frequency drive to control motor speed. However, we've been selling this pump since the mid-2000s and it continues to perform well and receive excellent customer feedback.
This pump comes with 1/2" barbed ports for easy connectivity
Comes with 4' tubing on both sides
Heat Tolerant materials to 212°F (when used with silicone tubing)
110 Volts, 0.5 Amp, 60 Hz.
The ideal vessel for serving pre-mixed cocktails and other concoctions on draft Easily pour in your beverage of choice through the wide corny-style lid opening without needing to remove the spear Doubles as a line cleaning keg Rolled handles for a comfortable grip Low2 lid O-ring reduces oxygen ingress by 96% compared to silicone O-rings when measured in a keg! Made by an ISO certified commercial keg manufacturer with high-quality laser welded seams The Torpedo Cocktail Keg is the ideal vessel for serving pre-mixed cocktails and other concoctions on draft. The corny keg style lid makes it easy to pour in your beverage of choice without having to fuss with removing the spear like with standard commercial sanke kegs. Hook up a D-Style keg coupler to begin carbonating the beverage from the bottom up. These kegs provide the added advantage of fully carbonating the entire cocktail. When making drinks on the fly, carbonation is lost quickly since you're mixing carbonated and still ingredients together. But when served from a fully carbonated keg, you can enjoy the bubbles in your glass for longer! Draft lines needing some love? The Torpedo Cocktail keg easily doubles as a line cleaning keg. Simply fill with a batch of LLC or BLC to give your bev lines a little TLC. Low2 Keg Lid O-ring Give your beverage the absolute best protection from oxygen staling with the Low2 keg lid O-ring. Even the most perfectly sealed keg is susceptible to oxygen ingress through the hatch O-ring—yes, even if the keg is under constant pressure with CO2! Even a leak-free, pressurized keg will release CO2 molecules as they pass through the lid O-ring itself, and conversely, Oxygen molecules will permeate through the O-ring and diffuse into the keg when they reach the surface area on the other side. The level of permeability is wide ranging and highly dependent on what material the O-ring is made from. Rather than the usual EPDM or Silicone, Low2 gaskets are made from a unique composition of Synthetic M-Class and Cross-Link Elastomers. This special blend has superior oxygen barrier properties that results in your beverage staying fresher for longer. Specifications: Max Pressure: 130 psi PRV Rating: 85 psi High Quality Laser Welded Seams ISO9001 Quality Assurance Made from 304 Stainless Steel Dimensions: Height (in.) Diameter (in.) 1.5 Gal 10 9 3/8 2.5 Gal 13 1/4 9 3/8
The KOMOS Deluxe Kegerator model boasts the same features as the standard model with an eye-catching stainless steel extrerior and upgraded stainless steel drip tray. The interior is designed to fit up to four 5-gallon ball lock kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless door and exterior, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless steel door, top cover, and side panels Stainless Countertop Style Drip Tray Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 See below for the Kegerator Instruction Manual. (The Deluxe Kegerator does not have feauture a Guard Rail as seen in the residental kegerator instructions.) Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
Brand-new stainless steel beer keg with US-standard MicroMatic D System Spear
Half Barrel Keg holds 165x 12 oz beers or 124x 16 oz pints
Ideal for large-batch brewers where you want to clean and sanitize as few kegs as possible
Commercial quality construction—produced and tested in an ISO 9001 Certified facility
Supply your brewery with the best kegs on the market with these Full Size 15.5 gallon Half Barrel US Sanke Kegs. Our kegs are produced and tested for quality in an ISO 9001 Certified facility, abiding by strict quality control standards. Each 15.5 gal keg is constructed entirely of Stainless Steel, ensuring a long serving life for your brewery.
Holds 165 x 12 oz beers (124 x 16 oz pints).
Features:
Full Size 15.5 gal (1/2 bbl) US Sanke keg
304 Stainless Steel Construction
23.25" Height, 16.8" Diameter
Produced in an ISO 9001 Certified Facility
Drop In spears produced by MicroMatic
Working pressure is 43.51 psi (3.0bar)
With your own Nitrogen tank, you can add Nitro-Draft capability to your Home Dispense System!
Serve beer on Nitro! The best way to pour your favorite stouts and porters!
Made from high-quality aluminum that will never rust like steel tanks
Fill with Beer Gas Mix to get that alluring, cascading pour famously associated with Guinness
CGA580 valve pairs with standard US-style nitrogen & argon gas regulators
KOMOS® offers a full suite of first-rate draft products and draft fittings—from kegs to faucets and everything in between!
Use pure nitrogen to serve still wine, cold brew coffee, Sangria and premixed cocktails on draft
Brand new aluminum 22 cubic feet Nitrogen tank made from high strength aluminum alloy and high quality CGA580 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It can be filled with compressed (liquified) Nitrogen, Argon, or Beer Gas Mix (70% Nitro/30% CO2).
Fill with beer gas mix (70% Nitrogen/30% CO2) for dispensing beers "On Nitro". Using 100% Nitrogen is also the recommended gas for dispensing cold brew coffee, wine, or even Sangria and premixed cocktails on draft!
Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder.
Tanks should always be stored in an upright position.
Features:
Made from corrosion resistant, engineered Aluminum
Brushed finish
Thick, durable cylinder walls
DOT approved
New high quality CGA-580 valve
Light weight compared to steel tanks
Rated to 2216 PSI service / 3360 PSI test pressure PSI (allowing for Nitrogen fill)
Can also be filled with Argon or Beer Gas Mix (Nitrogen/CO2)
NOTE: You will need at Nitrogen/Argon Regulator to go with this tank, a standard CO2 regulator will not work.
The Ultimate Grain Mill designed for the most avid homebrewers
Load an entire sack's worth of grain into the hopper and have it milled in under 5 minutes
2" hardened steel rollers with a fully adjustable gap range from 0.011"–0.093"
Stainless steel stand sits snugly over a 6-gallon bucket to keep grain dust contained
Stainless lid keeps dust down and keeps your hopper clean for your next batch
Made with commercial-grade explosion proof motor for added safety
If you aspire to build the ultimate homebrewery then you should really consider the Ultimate Grain Mill. With a stainless construction, 60lb grain hopper with lid, fully adjustable hardened steel rollers, and explosion proof motor this is the top-of-the-line grain mill for homebrewers and a great choice for a nano brewery.
The all stainless hopper holds a sack of malted grain. The included stainless lid keeps dust down and keeps your hopper clean for your next batch. The mill body itself is also made from stainless steel while the 2" diameter rollers are made from hardened steel for longevity. The rollers adjust on both sides providing for a consistent, even gap the length of the rollers. The rollers are knurled in a pattern that we have found over the years to deliver a great crush and consistent feed.
We use an explosion proof motor, found on commercial mills, because grain dust can ignite if a regular electric motor was to emit a spark. It is a measure of safety to give you and your family peace of mind. The switch on this unit has been upgraded with a sturdy cover, to further diminish the chance of sparking.
The stainless stand allows for a six gallon reception bucket to be slid under to collect cracked grain. Since grain dust is to be avoided in a brewery we make the bucket-to-stand fit perfectly tight to reduce dust in your brewery. A six gallon bucket will hold 25 pounds of grain, which we have found is a manageable size to lift. For larger batches you can mill into one bucket, turn off the mill, and continue milling into the next bucket.
Features:
60 pound capacity stainless hopper with lid
Stainless mill body
2" x 4.375" Fully Adjustable hardened steel rollers (Gap range of 0.011 - 0.093 inches)
Stainless stand
1/3 hp explosion proof motor with on/off switch
110v Motor pulls 6.6 Amps
38"H x 27"L x 16"W
15 lbs per minute throughput
Please note: The UltiMill now features a finger guard inside the hopper near the rollers. It is a simple welded-in-place bar that will not affect grain being fed into the mill but may affect larger materials if the mill is being used for something other than brewing malt.
Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.
Yeast require oxygen for growth, make sure you always have some available to oxygenate your wort prior to pitching!
This 20 cubic foot O2 cylinder is good for about 500 batches of beer.
Hate having your disposable oxygen tank run out right before you were about to pitch your yeast? Or just tired of running through disposable tanks in general? Consider stepping up to a refillable oxygen cylinder. Whether you brew big batches or brew frequently, a refillable oxygen tank is a great way to save time and money.
The tank needs to be hydrotested every 10 years and is easily and affordably filled at any participating welding gas company.
Specs:
Cylinder: 20 cu ft
Material: Steel Cylinder – Standard Valve
Capacity: 20 cu ft (566 Liters)
Service Pressure: 2015 PSI / 139 Bar
Test Pressure: 3360 PSI
DOT- and TC- Approved
Valve Type: CGA540
Dimensions:
Diameter: 5.2" (132 mm)
Height: 14.8" (376 mm)
Empty Weight: 14.1 lb
Serve beer on tap at home! A quality CO2 tank is a core component to any home draft system.
Fill at a local welding shop or swap out for a full tank at your local homebrew shop
Made from high-quality aluminum that will never rust like steel tanks
Dispense 18 x five-gallon kegs of homebrew
Go with the larger 10 lb CO2 tank and extend the time between needing to refill or swap for a full tank
This brand new, 10 lb aluminum CO2 tank ships free in the 48 contigous states, and because it is made of aluminum rather than steel you can feel confident that it will never rust. It’s called a 10 lb tank because it holds 10 lb of compressed (liquified) CO2. 10 lb of CO2 is enough to dispense 18 five gallon kegs of homebrew.
All new CO2 tanks are shipped empty and will require either filling or exchanging for a full tank. Most local homebrew shops will stock gas to exchange, and many local welding supply companies can fill tanks on site.
Dimensions: 20.75" Tall x 7" wide.
NOTE: CO2 tanks should always be stored in an upright position.
