Search results for "ss brewtech glycol"

Our new FTSs quick disconnect kit is the perfect way to increase the efficiency of your cooling system while also making it easier to detach your fermenter's chiller coil for easy cleaning.  The neoprene sleeve both insulates and wicks away condensation to reduce temp loss in your FTSs tubing. The sleeve is 10 feet in total length and can be cut to custom lengths to adapt to any FTSs setup.  Once cut, use the included velcro strip to secure the sleeve to the quick disconnect fitting. The quick disconnect fitting was custom tooled for Ss Brewtech with 3/8" hose barbs and features all EPDM seals, which maintain sealing properties at low temperatures.  In addition, they include all stainless internal hardware, and integrated valves in both the male and female components to prevent spilling. These fittings work great with either glycol or chilled water from a cooler.  One Quick Disconnect option: (1) 10' Neoprene Sleeve (1) Quick Disconnect Fitting (2) Velcro strips (4) Stainless hose clamps Two Quick Disconnect option: (1) 10' Neoprene Sleeve (2) Quick Disconnect Fitting (4) Velcro strips (8) Stainless hose clamps  

Read more less

The ultimate control & precision of your fermentation process. Equipped with two built-in temperature controllers and pumps, this advanced chiller enables you to independently regulate the temperature of two separate fermentation vessels simultaneously, ensuring optimal conditions for different batches or styles of beer, making it a game-changer for homebrewers. 2 built-in submersible pumps with independent digital controllers Control multiple fermentation temperatures independently Fill with 20% glycol solution for optimal chilling performance Cold crash with good insulation Perfect complement to BrewBuilt X-Series Conicals The IceMaster Max 2 is designed to cool fermentations in small vessels. It features 2 built-in submersible pumps with independent digital temperature controllers and can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. Each controller includes a temperature probe that should be inserted into a thermowell in your vessel or can be taped to the outside of the vessel if you don't have a thermowell. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to two tanks can be controlled separately with one IceMaster Max 2. The Max 2 is the perfect unit for brewers with 1 or 2 fermentation vessels. The IceMaster 100 and IceMaster Max 4 are terrific chillers, but for they have far more cooling capacity than the average homebrewer needs. The Max 2 is the most affordable glycol chiller we offer, and thanks to the built-in submersible pumps and controllers, there's no need to purchase additional pump kits to use with your cooling system(s). Compatibility The IceMaster can be used with any fermenter that has a built-in cooling jacket, added CoolStix, or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters. BrewBuilt Jacketed Uni Conical - we recommend one Insulated Tubing Kit for each tank. These kits feature "dry break" quick disconnects that prevent glycol loss and the insulated tubing will increase chilling efficiency and eliminate line sweating from condensation. CoolStix - CoolStix can be added to a wide range of carboys, fermenters, and tanks and the IceMaster works really well in combination. Each CoolStix is available with or without a pump kit; for use with the IceMaster Max 2 you will only need the CoolStix and some tubing to connect it to the chiller.   Ss Brewtech Fermenters and Brites - Ss BME Chronicals, BME Brites, and Unitanks come with cooling coils and neoprene as standard. The optional chilling FTSs will not be needed for use with the Max 2. Spike Conical with Optional Cooling Coil - the cooling coil for Spike CF series conicals is available for purchase independently from the TC-100 cooling system. For use with the Max 2 you will only need the coil and some tubing to connect it to the chiller. Speidel Tanks with Optional Cooling Jackets - You will need two lengths of tubing to connect the chiller to each tank.    Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need two lengths of tubing for each fermenter. Blichmann Fermenators with Optional Cooling Coil - You will need two lengths of tubing for each Fermenator. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75°F ambient and neoprene insulation. Neoprene provides a modest amount of insulation so you would obtain better results using Armaflex or a higher R rated insulation.  At 75°F ambient temperature with neoprene insulation, the Max 2 can cold crash one 1 BBL BrewBuilt Jacketed Uni or two Jacketed Unis up to 15 gallons in size at one time to 38°F. Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 2 lengths of tubing per vessel. All tubing connections should be secured with hose clamps. The unit comes with JoinTech Male Quick Disconnects installed as the inlet/outlet bulkheads, and also includes Female QDs with barbs to connect your tubing to the bulkheads. QDs to connect tubing to your cooling system are not included as the connection type depends on your setup. Length 1: 1st bulkhead (IN) to cooling system outlet Length 2: 2nd bulkhead (OUT) to cooling system inlet Specifications: 2 built-in submersible pumps with independent digital controllers Pump controller reads in °F / °C Temperature controller reads in °C Labeled IN and OUT bulkheads with Male QD JoinTech Dry Break Quick Disconnects (4) Female QD JoinTech Dry Break Quick Disconnect w/ 1/2" Barb included Tank Capacity: 17 L / 4.5 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 500 Watt/1700btu/0.14 tons Refrigerant: R600a Voltage: 110V Dimensions: 19" x 12" x 17.5" Wheels not included CE Certified   Note: The sight glass attaches to the front of the unit by threading the elbow fitting to the bottom threaded drain port, and attaching the other end to the upper mount. Note that the top of the sight glass is open to allow overflow to drain out if the reservoir is overfilled. Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.

Read more less

The Chilling Coil kit can be used to update the 7 gal Brew Buckets for temperature control. Then you can add an FTSs Touch kit for use with the Ss Glycol Chiller. Features: Thick 5 mm zippered neoprene jacket Immersion chiller coil mounted to 6" TC cap Cap | 3” TC with ½” Blow-Off and 300mm Thermowell 3/8" hose barbs on the chiller coil 17mm Plug for Brew Bucket Brewmaster Edition Included hose clamps (for chiller coil), TC Clamps, TC Gaskets Kit not compatible with Brite Tanks, Chronical Series, or Unitanks. Specs: Assembled Dimensions: 27.5"H x 13"W x 13"D (on Bucket) Assembled Weight: 22lbs / 10kgs (on Bucket)  

Read more less

The Ss Glycol Chiller | 1/5 HP, will maintain lager temps and enable crash cooling for up to 3 vessels even in relatively high ambient temperatures. We designed the chiller to integrate seamlessly with our FTSs kits to provide a complete temperature control system. Since each FTSs kit includes its own dedicated temperature controller, pump, and tubing, each vessel can be connected to the glycol chiller with its own independent loop. The parallel design of this setup offers the ability to ferment at ale temps in one vessel, and maintain precise serve or crash cooling temps in another vessel. The Glycol Chiller can also be paired with our line of Ss Brite Tanks to hold beer at serving temperatures. This system offers both flexibility and expandability for your home brewery.  Features:  Pumps not included, attach up to 3 FTSs Touch kits (sold separately) Capable of crash cooling and lagering Assuming one vessel is crash cooled at a time: Chills Up to 2 - 1/2 bbl, 14 gal Chronicals, Unitanks, or Brew Buckets Chills Up to 3 - 7 gal Chronicals, Unitanks, or 10 gal Brite Tanks Chills Up to 3 - 7 or 3.5 gal Brew Buckets Not Compatible with the FTSs Pro Series Controllers Specs: Vertical chassis layout 120 VAC 1/5 HP Compressor 1450 BTUs/Hr 4.75 Gallon Reservoir with Pressure Vent R290 Refrigerant Casters Included Made in France Dimensions: 14" W x 11" D x 27.5" H  

Read more less

Introducing the Ss Glycol Chiller 3/8 HP, which will maintain lager temps and enable crash cooling for up to 6 vessels even in relatively high ambient temperatures. We designed the chiller to integrate seamlessly with our FTSs kits to provide a complete temperature control system. Since each FTSs kit includes its own dedicated temperature controller, pump, and tubing, each vessel can be connected to the glycol chiller with its own independent loop. The parallel design of this set up offers the ability to ferment at ale temps in one vessel, and maintain precise serve or crash cooling temps in another vessel. The Glycol Chiller can also be paired with our line of Ss Brite Tanks to hold beer at serving temperatures. This system offers both flexibility and expandability for your home brewery.  Features: Pumps not included, attach up to 6 FTSs Touch kits (sold separately) Capable of crash cooling and lagering Assuming one vessel is crash cooled at a time: Chills Up to 4 - 1 BBL Chronicals, Unitanks or Brite Tanks Chills Up to 6 - 1/2 BBL, 14, or 7 gal Chronicals or Unitanks, 10 or 20 gal Brite Tanks Chills up to 6 - 14 or 7 gal Brew Buckets  Not Compatible with the FTSs Pro Series Controllers Specs: Vertical chassis layout 120 VAC 3/8 HP Compressor 3576 BTUs/Hr 10 Gallon Reservoir with Pressure Vent R290 Refrigerant Casters included Made in France Dimensions: 18" W x 18" D x 28" H  

Read more less

The ultimate control & precision of your fermentation process. Equipped with four built-in temperature controllers and pumps, this advanced chiller enables you to independently regulate the temperature of multiple separate fermentation vessels simultaneously, ensuring optimal conditions for different batches or styles of beer, making it a game-changer for homebrewers. 4 Built-in pumps and digital controllers Control multiple fermentation temperatures independently Fill with 20% glycol solution for optimal chilling performance Cold crash with good insulation Perfect complement to BrewBuilt X-Series Conicals The IceMaster Max 4 is designed to cool fermentations in small vessels. It features 4 built-in submersible pumps with independent digital temperature controllers and can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. Each controller includes a temperature probe that should be inserted into a thermowell in your vessel or can be taped to the outside of the vessel if you don't have a thermowell. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to four tanks can be controlled separately with one IceMaster Max 4. Compatibility The IceMaster can be used with any fermenter that has a built-in cooling jacket, added CoolStix, or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters. BrewBuilt Jacketed Uni Conical - we recommend one Insulated Tubing Kit for each tank. These kits feature "dry break" quick disconnects that prevent glycol loss and the insulated tubing will increase chilling efficiency and eliminate line sweating from condensation. CoolStix - CoolStix can be added to a wide range of carboys, fermenters, and tanks and the IceMaster works really well in combination. Each CoolStix is available with or without a pump kit; for use with the IceMaster Max 4 you will only need the CoolStix and some tubing to connect it to the chiller. Ss Brewtech Fermenters and Brites - Ss BME Chronicals, BME Brites, and Unitanks come with cooling coils and neoprene as standard. The optional chilling FTSs will not be needed for use with the Max 4. The cooling coil for standard Ss Chronicals and Brew Buckets are not sold a la carte and must be purchased with a submersible pump, which is not needed for the Max 4. For standard Chronicals and Brew Buckets you might consider the IceMaster 100 for cost savings. Spike Conical with Optional Cooling Coil - the cooling coil for Spike CF series conicals is available for purchase independently from the TC-100 cooling system. For use with the Max 4 you will only need the coil and some tubing to connect it to the chiller. Speidel Tanks with Optional Cooling Jackets - You will need two lengths of tubing to connect the chiller to each tank. Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need two lengths of tubing for each fermenter. Blichmann Fermenators with Optional Cooling Coil - You will need two lengths of tubing for each Fermenator. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75°F ambient and neoprene insulation. Neoprene provides a modest amount of insulation so you would obtain better results using Armaflex or a higher R rated insulation. Capacity calculated at cold crashing to a target temperature of 38°F while the ambient temperature is 75°F with neoprene insulation (double tank capacity for ale fermentation temperature control): 2 - 1BBL (31 Gallon) Jacketed Tank 2 - 1/2BBL (15-20 Gallon) Tanks 3 - 10-14 Gallon Tanks 4 - 5-7 Gallon Tanks Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 2 lengths of tubing per vessel. All tubing connections should be secured with hose clamps. Length 1: Barb of 1st bulkhead (IN) to cooling system outlet Length 2: Barb of 2nd bulkhead (OUT) to cooling system inlet Specifications: 4 built-in submersible pumps with independent digital controllers Pump controllers read in °F/°C Temperature controller reads in °C Labeled IN and OUT stainless bulkheads with 3/8" OD barbs Tank Capacity: 30L/8 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 780 Watt/2600btu/0.26 ton Refrigerant: R134a Voltage: 110V (3.6 amps) Dimensions: 16.1" x 16.1" x 26" Wheels included CE Certified Max Head: 21.3 ft (6.5 m) Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.

Read more less

The Unitank 2.0 features 50% more cooling surface than the previous generation for better cooling efficiency and crashing performance. Manufactured with professional level quality that has been the standard for Ss Brewtech's professional-level Unitanks New Ss Brewtech Racking Arm co-molded with the geometry of the valve body and TC gasket which prevents the arm from coming loose Quickly carbonate beer in under 24 hours using the carb stone while precisely monitoring head pressure Adding an optional Sspunding Valve to the Unitank gives the brewer the ability to ferment under pressure An evolutionary step forward in homebrew technology. The Unitank 2.0 builds upon the venerable Unitank line by increasing the full body wall thickness from 1.2 to 1.5mm 304 Stainless Steel. Then we added a fully laser welded, professional-grade jacketed cooling solution to the already advanced feature set the original Unitank is known for. With up to 50% more cooling surface area, maintaining a stable temperature and crashing your beer has never been more efficient. Jacketed Cooling The benefits of jacketed cooling are numerous, and such engineering has become the standard in Ss Brewtech professional Unitanks for years. With Unitank 2.0, those same benefits are available to the 5, 10, 15 and 31 gal home or nano brewer. When paired with FTSs Touch and Ss Glycol Chillers, the Unitank 2.0 can provide an uncompromised level of fermentation control. The increased surface area of jacketed cooling allows more precise temp control not seen in the home brew industry. Additionally, the added surface area allows the fermenter to crash cool in even the most challenging environments. Another benefit of moving to jacketed cooling is that removing the coil makes the cleaning process much more straightforward. When used with the Ss Brewtech CIP ball, cleaning can be performed just as the pros do in craft breweries. Staggered inlet and outlet ports for the glycol jacket help with even coolant distribution in the jacket. The rear-mounted thermowell cleans up the coolant control wiring for an even more professional setup. Keyed Racking Arm Like the Chronical 2.0, the Unitank 2.0 features a version of the new Ss Brewtech Racking Arm co-molded with the geometry of the valve body and TC gasket; this ingenious design captures the racking arm and prevents it from coming loose. Additionally, the keyed elements of the valve allow the brewer to know precisely what direction the racking arm is facing based on the orientation of the valve on the vessel. What's more, the Unitank valve is the same full pressure-rated valve used on professional Ss Brewtech equipment. All the Valves & Ports The Unitank 2.0 continues with all the beloved features of the original Unitank. On top of all the fully welded TC connections and pro features, the Unitank 2.0 allows the brewer to quickly carbonate beer in under 24 hours using the carb stone while precisely monitoring head pressure. After fermenting and carbonating, the brewer can perform a true pressurized and closed transfer to a keg or canning machine significantly reducing the chances of oxidation when compared to open transfers. Higher pressure limits allow the user to dispense beer directly out of the vessel. Lastly, adding an optional Sspunding Valve to the Unitank  gives the brewer the ability to ferment under pressure and gives them the option to use the final few gravity points left of active fermentation to naturally carbonate their beer instead of force carbonate. This feature set and flexibility are why pro brewers use Unitanks in their brewing and packaging processes. Features: Welded Cylinder Glycol Jacket Fully welded TC flanges 15 PSI operating pressure Rotatable Silicone Racking Arm 1.5” TC Butterfly Valves 1.5” TC Carb Stone with 3/8” ball valve 1.5” TC Blow Off Arm with Welded Blow Off Arm Mount 1.5” TC to ½” Ball Valve for Blow Off Cane 1.5” TC Pro Sanitary Pressure Gauge 1.5” TC Pro Sanitary Sampling Valve 1.5” TC Thermowell 3” TC Pressure Relief Valve (PRV) 6” TC to 3" TC Lid Reducer (Dry Hop, CIP, and PRV Port) Neoprene Insulation Jacket Stainless Lower Shelf Adjustable Feet

Read more less

A properly controlled fermentation temperature is critical to producing quality beer. The now-iconic original Fermentation Temperature Stabilization System (FTSs) resulted from many napkin sketches that applied advanced thermodynamics to traditional brewing practices. The system is elegant in its simplicity and incredibly efficient, yet it was the third product we ever designed at Ss Brewtech, just after the Brew Bucket and Chronical. For an encore performance to the classic FTSs, we wanted to reimagine what homebrewing temperature control could be. Your chill source can be as simple as a cooler with ice or as sophisticated as the Ss Glycol Chiller. If your setup requires temperatures to be corrected both up and down, check out the optional FTSs Touch | Heating Pad. The FTSs Touch is designed to be paired with systems like the Unitank, Chronical BME, and Brite Tank BME, which already have a cooling coil and neoprene jacket. What's Included: FTSs Touch Display FTSs Nub (junction box) FTSs Pump Digital Thermoprobe 3/8" Silicone Tubing FTSs Pump Ice Guard  Silicone Thermoprobe Holder Stand Mount TC Mount Cable/Tubing Management Ties Hose Clamps Power Supply

Read more less

The Ss Brite Tank is already an amazing piece of homebrewing equipment, and paired with a BrewMaster Upgrade Kit, you're one step closer to the ultimate home serving setup. This upgrade kit includes a TC Cap with stainless steel coil for cooling, and a thick Neoprene Jacket to keep the unit insulated! Combine with a Glycol Chiller for a stand alone home serving setup! Only works with 10 Gallon Brite Tank Features: 5 mm thick Neoprene Zippered Jacket Immersion Chiller coil mounted to 6" TC Cap Chiller Coil has 3/8" Hose barbs (matches up with FTSs system tubing!) Includes Hose Clamps. Pair with a Glycol / cooled liquid source, or click here for optional FTSs Temp Control Kit

Read more less

The FTSs Touch | Nano Jacketed Tank Upgrade kit has been designed to leverage components from our home brewing FTSs Touch line in an effort to provide a low-cost solution to pair a 1, 2, or 3.5 BBL Nano Jacketed Unitank and Nano Jacketed Brite Tanks with one of our 3/8 HP or 3/4 HP glycol chillers. This system features a custom TC thermowell adapter, along with a silicone insert to adapt the temperature probe from an FTSs Touch controller to the welded-in sleeved thermowell port on our line of Nano Jacketed Tanks.  In addition, a custom-designed low-pressure open silicone check valve is included to prevent backflow to the chiller's reservoir when glycol is not flowing.  The kit includes 1/2" NPT to 3/8" barbs to adapt the glycol ports for use with our standard FTSs Touch pump.  Since most Nano Jacketed Tanks are set up for use with a pressurized loop glycol system typically found in commercial breweries, this kit offers a Nano brewery an affordable, easy-to-setup alternative to more elaborate or expensive installations.  Everything is included to interface a single Nano Jacketed Tank between an FTSs Touch and Ss Glycol Chiller.  Cooling options for Ss Branded Glycol Chillers  FTSs Touch | Jacketed Tank Kit — Designed to be paired with our line of Ss Glycol Chillers.  Cooling options for Pressurized Glycol Loops on Commercial Chillers  FTSs Pro Touch (+ FTSs Pro Touch Solenoid Valve)  — Designed to be paired with pressurized-loop (Non-Ss Brewtech) commercial glycol systems. Not recommended for 5bbl & Larger Tanks Includes: (4) FTSs hose clamp for 3/8" barbs (1) Hose barb - 3/8" to 1/2" MPT (1) Silicone thermowell cover (1) 1.5" TC sleeved thermowell adapter (1) FTSs harness extension 3 ft (1) Silicone check valve Works with 1, 2, and 3.5 bbl Nano Jacketed Tanks Not required for Unitank 2.0  

Read more less

The Chilling Coil kit can be used to update the 3.5 gal Brew Bucket Minis for temperature control. Then you can add an FTSs Touch kit for use with the Ss Glycol Chiller.  Features: 304 Stainless steel Immersion chiller coil Thick 5 mm zippered neoprene jacket FTSs designed lid included Weldless 200mm thermowell Included hose clamps (for chiller coil), 17mm stopper (for airlock) Specs: Assembled Dimensions: 17.5"H x 11.5"W x 11.5"D (on Bucket) Assembled Weight: 10lbs / 4.5kgs (on Bucket)  

Read more less

The Chilling Coil kit can be used to update the 14 gal Brew Buckets for temperature control. Then you can add an FTSs Touch kit for use with the Ss Glycol Chiller. Features: Thick 5 mm zippered neoprene jacket Immersion chiller coil mounted to 6" TC cap Cap | 3” TC with ½” Blow-Off 3/8" hose barbs on the chiller coil Included hose clamps (for chiller coil), TC Clamps, TC Gaskets Kit not compatible with Brite Tanks, Chronical Series, or Unitanks. Specs: Assembled Dimensions: 30"H x 16.5"W x 16.5"D (on Bucket) Assembled Weight: 30lbs / 13.5kgs (on Bucket)

Read more less

The IceMaster 100 is a powerful and efficient glycol system that provides precise temperature control of multiple Fermenters, but allows you to expand your capacity as needed! Temp Control & Cold Crash up to 4 - 5-7 Gallon Jacketed Tanks! Tank Capacity: 30L/8 Gal. Water Capacity Cooling Capacity: 780 Watt/2600btu/0.26 ton Power: 110V (3.6 amps) The IceMaster 100 is designed to cool fermentations in small vessels. It can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. For each vessel you want to cool you will need to buy one of our BrewBuilt Chilling Pump Kits. Each tank is able to be separately temperature controlled. Each Glycol Pump Kit includes a submersible pump that is placed in the cool bath of this chiller along with a digital controller. The digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don't have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to four tanks can be controlled separately with one IceMaster and four BrewBuilt Chilling Pump Kit (GLY35). Compatibility The IceMaster can be used with any fermenter that has a built in cooling jacket, added Coolstix, or a submersed cooling coil. It works well as the cooling source for the following sytems and fermenters. BrewBuilt Jacketed Uni Conical - You will need one Glycol Pump Kit for each tank. Coolstix - Coolstix can be added to a wide range of carboys, fermenters, and tanks and the IceMaster works really well in combination. Each Coostix Complete Kit comes with a pump kit and controller. Ss Brewtech Fermenters and Brites with optional FTS Temperature Control Systems - Because FTS systems include a pump and controller you will not need to buy a separate Glycol Pump Kit. Spike Conical with Optional Cooling Package - Because the optional Spike cooling system includes a pump and controller you will not need to buy a separate Glycol Pump Kit. Speidel Tanks with Optional Cooling Jackets - You will need one Glycol Pump Kit for each tank. Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need one Glycol Pump Kit for each fermenter Blichmann Fermenators with Optional Cooling Coil - You will need one Glycol Pump Kit for each Fermenator. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75°F ambient and neoprene insulation. Neoprene a modest amount of insulation so you would obtain better results using Armaflex or a higher R rated insulation. If only controlling fermentation temps the capacity would be higher. Four BrewBuilt Chilling Pump Kits (GLY35) is the maximum that will fit in the IceMaster. We are working on smaller glycol pump kits, where the pumps have smaller footprints, so the IceMaster right now has the capacity to use 5 pumps through the bulkhead fittings. Capacity calculated at cold crashing to 38°F at 75°F ambient with neoprene insulation (double for fermentation temperature control): 2 - 1BBL (31 Gallon) Jacketed Tanks 2 - 1/2BBL (15-20 Gallon) Tanks 3 - 10-14 Gallon Tanks 4 - 5-7 Gallon Tanks Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 4 lengths of tubing. All tubing connections should be secured with hose clamps. Length 1: Submersible pump outlet to inner barb of 1st bulkhead Length 2: Outer barb of 1st bulkhead to cooling system inlet Length 3: Cooling system outlet to outer barb of 2nd bulkhead Length 4: Inner barb of 2nd bulkhead to IceMaster resevoir (should drain freely, no connection necessary) Specifications: Tank Capacity: 30L/8 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 780 Watt/2600btu/0.26 ton Refrigerant: r134a Voltage: 110V (3.6 amps) Dimensions: 410mm x 410mm x 660mm Includes 10 stainless bulkheads with 3/8" OD barbs Wheels included CE Certified Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.

Read more less

The ultimate control & precision of your fermentation process. Equipped with four built-in temperature controllers and pumps, this advanced chiller enables you to independently regulate the temperature of multiple separate fermentation vessels simultaneously, ensuring optimal conditions for different batches or styles of beer, making it a game-changer for homebrewers. 4 Built-in pumps and digital controllers Control multiple fermentation temperatures independently Fill with 20% glycol solution for optimal chilling performance Cold crash with good insulation Perfect complement to BrewBuilt X-Series Conicals The IceMaster Max 4 is designed to cool fermentations in small vessels. It features 4 built-in submersible pumps with independent digital temperature controllers and can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. Each controller includes a temperature probe that should be inserted into a thermowell in your vessel or can be taped to the outside of the vessel if you don't have a thermowell. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to four tanks can be controlled separately with one IceMaster Max 4. Compatibility The IceMaster can be used with any fermenter that has a built-in cooling jacket, added CoolStix, or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters. BrewBuilt Jacketed Uni Conical - we recommend one Insulated Tubing Kit for each tank. These kits feature "dry break" quick disconnects that prevent glycol loss and the insulated tubing will increase chilling efficiency and eliminate line sweating from condensation. CoolStix - CoolStix can be added to a wide range of carboys, fermenters, and tanks and the IceMaster works really well in combination. Each CoolStix is available with or without a pump kit; for use with the IceMaster Max 4 you will only need the CoolStix and some tubing to connect it to the chiller. Ss Brewtech Fermenters and Brites - Ss BME Chronicals, BME Brites, and Unitanks come with cooling coils and neoprene as standard. The optional chilling FTSs will not be needed for use with the Max 4. The cooling coil for standard Ss Chronicals and Brew Buckets are not sold a la carte and must be purchased with a submersible pump, which is not needed for the Max 4. For standard Chronicals and Brew Buckets you might consider the IceMaster 100 for cost savings. Spike Conical with Optional Cooling Coil - the cooling coil for Spike CF series conicals is available for purchase independently from the TC-100 cooling system. For use with the Max 4 you will only need the coil and some tubing to connect it to the chiller. Speidel Tanks with Optional Cooling Jackets - You will need two lengths of tubing to connect the chiller to each tank. Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need two lengths of tubing for each fermenter. Blichmann Fermenators with Optional Cooling Coil - You will need two lengths of tubing for each Fermenator. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75°F ambient and neoprene insulation. Neoprene provides a modest amount of insulation so you would obtain better results using Armaflex or a higher R rated insulation. Capacity calculated at cold crashing to a target temperature of 38°F while the ambient temperature is 75°F with neoprene insulation (double tank capacity for ale fermentation temperature control): 2 - 1BBL (31 Gallon) Jacketed Tank 2 - 1/2BBL (15-20 Gallon) Tanks 3 - 10-14 Gallon Tanks 4 - 5-7 Gallon Tanks Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 2 lengths of tubing per vessel. All tubing connections should be secured with hose clamps. Length 1: Barb of 1st bulkhead (IN) to cooling system outlet Length 2: Barb of 2nd bulkhead (OUT) to cooling system inlet Specifications: 4 built-in submersible pumps with independent digital controllers Pump controllers read in °F/°C Temperature controller reads in °C Labeled IN and OUT stainless bulkheads with 3/8" OD barbs Tank Capacity: 30L/8 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 780 Watt/2600btu/0.26 ton Refrigerant: R134a Voltage: 110V (3.6 amps) Dimensions: 16.1" x 16.1" x 26" Wheels included CE Certified Max Head: 21.3 ft (6.5 m) Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.

Read more less

The ultimate control & precision of your fermentation process. Equipped with four built-in temperature controllers and pumps, this advanced chiller enables you to independently regulate the temperature of multiple separate fermentation vessels simultaneously, ensuring optimal conditions for different batches or styles of beer, making it a game-changer for homebrewers. 4 Built-in pumps and digital controllers Control multiple fermentation temperatures independently Fill with 20% glycol solution for optimal chilling performance Cold crash with good insulation Perfect complement to BrewBuilt X-Series Conicals The IceMaster Max 4 is designed to cool fermentations in small vessels. It features 4 built-in submersible pumps with independent digital temperature controllers and can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. Each controller includes a temperature probe that should be inserted into a thermowell in your vessel or can be taped to the outside of the vessel if you don't have a thermowell. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to four tanks can be controlled separately with one IceMaster Max 4. Compatibility The IceMaster can be used with any fermenter that has a built-in cooling jacket, added CoolStix, or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters. BrewBuilt Jacketed Uni Conical - we recommend one Insulated Tubing Kit for each tank. These kits feature "dry break" quick disconnects that prevent glycol loss and the insulated tubing will increase chilling efficiency and eliminate line sweating from condensation. CoolStix - CoolStix can be added to a wide range of carboys, fermenters, and tanks and the IceMaster works really well in combination. Each CoolStix is available with or without a pump kit; for use with the IceMaster Max 4 you will only need the CoolStix and some tubing to connect it to the chiller. Ss Brewtech Fermenters and Brites - Ss BME Chronicals, BME Brites, and Unitanks come with cooling coils and neoprene as standard. The optional chilling FTSs will not be needed for use with the Max 4. The cooling coil for standard Ss Chronicals and Brew Buckets are not sold a la carte and must be purchased with a submersible pump, which is not needed for the Max 4. For standard Chronicals and Brew Buckets you might consider the IceMaster 100 for cost savings. Spike Conical with Optional Cooling Coil - the cooling coil for Spike CF series conicals is available for purchase independently from the TC-100 cooling system. For use with the Max 4 you will only need the coil and some tubing to connect it to the chiller. Speidel Tanks with Optional Cooling Jackets - You will need two lengths of tubing to connect the chiller to each tank. Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need two lengths of tubing for each fermenter. Blichmann Fermenators with Optional Cooling Coil - You will need two lengths of tubing for each Fermenator. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75°F ambient and neoprene insulation. Neoprene provides a modest amount of insulation so you would obtain better results using Armaflex or a higher R rated insulation. Capacity calculated at cold crashing to a target temperature of 38°F while the ambient temperature is 75°F with neoprene insulation (double tank capacity for ale fermentation temperature control): 2 - 1BBL (31 Gallon) Jacketed Tank 2 - 1/2BBL (15-20 Gallon) Tanks 3 - 10-14 Gallon Tanks 4 - 5-7 Gallon Tanks Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 2 lengths of tubing per vessel. All tubing connections should be secured with hose clamps. Length 1: Barb of 1st bulkhead (IN) to cooling system outlet Length 2: Barb of 2nd bulkhead (OUT) to cooling system inlet Specifications: 4 built-in submersible pumps with independent digital controllers Pump controllers read in °F/°C Temperature controller reads in °C Labeled IN and OUT stainless bulkheads with 3/8" OD barbs Tank Capacity: 30L/8 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 780 Watt/2600btu/0.26 ton Refrigerant: R134a Voltage: 110V (3.6 amps) Dimensions: 16.1" x 16.1" x 26" Wheels included CE Certified Max Head: 21.3 ft (6.5 m) Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.

Read more less

The ultimate control & precision of your fermentation process. Equipped with four built-in temperature controllers and pumps, this advanced chiller enables you to independently regulate the temperature of multiple separate fermentation vessels simultaneously, ensuring optimal conditions for different batches or styles of beer, making it a game-changer for homebrewers. 4 Built-in pumps and digital controllers Control multiple fermentation temperatures independently Fill with 20% glycol solution for optimal chilling performance Cold crash with good insulation Perfect complement to BrewBuilt X-Series Conicals The IceMaster Max 4 is designed to cool fermentations in small vessels. It features 4 built-in submersible pumps with independent digital temperature controllers and can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. Each controller includes a temperature probe that should be inserted into a thermowell in your vessel or can be taped to the outside of the vessel if you don't have a thermowell. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to four tanks can be controlled separately with one IceMaster Max 4. Compatibility The IceMaster can be used with any fermenter that has a built-in cooling jacket, added CoolStix, or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters. BrewBuilt Jacketed Uni Conical - we recommend one Insulated Tubing Kit for each tank. These kits feature "dry break" quick disconnects that prevent glycol loss and the insulated tubing will increase chilling efficiency and eliminate line sweating from condensation. CoolStix - CoolStix can be added to a wide range of carboys, fermenters, and tanks and the IceMaster works really well in combination. Each CoolStix is available with or without a pump kit; for use with the IceMaster Max 4 you will only need the CoolStix and some tubing to connect it to the chiller. Ss Brewtech Fermenters and Brites - Ss BME Chronicals, BME Brites, and Unitanks come with cooling coils and neoprene as standard. The optional chilling FTSs will not be needed for use with the Max 4. The cooling coil for standard Ss Chronicals and Brew Buckets are not sold a la carte and must be purchased with a submersible pump, which is not needed for the Max 4. For standard Chronicals and Brew Buckets you might consider the IceMaster 100 for cost savings. Spike Conical with Optional Cooling Coil - the cooling coil for Spike CF series conicals is available for purchase independently from the TC-100 cooling system. For use with the Max 4 you will only need the coil and some tubing to connect it to the chiller. Speidel Tanks with Optional Cooling Jackets - You will need two lengths of tubing to connect the chiller to each tank. Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need two lengths of tubing for each fermenter. Blichmann Fermenators with Optional Cooling Coil - You will need two lengths of tubing for each Fermenator. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75°F ambient and neoprene insulation. Neoprene provides a modest amount of insulation so you would obtain better results using Armaflex or a higher R rated insulation. Capacity calculated at cold crashing to a target temperature of 38°F while the ambient temperature is 75°F with neoprene insulation (double tank capacity for ale fermentation temperature control): 2 - 1BBL (31 Gallon) Jacketed Tank 2 - 1/2BBL (15-20 Gallon) Tanks 3 - 10-14 Gallon Tanks 4 - 5-7 Gallon Tanks Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 2 lengths of tubing per vessel. All tubing connections should be secured with hose clamps. Length 1: Barb of 1st bulkhead (IN) to cooling system outlet Length 2: Barb of 2nd bulkhead (OUT) to cooling system inlet Specifications: 4 built-in submersible pumps with independent digital controllers Pump controllers read in °F/°C Temperature controller reads in °C Labeled IN and OUT stainless bulkheads with 3/8" OD barbs Tank Capacity: 30L/8 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 780 Watt/2600btu/0.26 ton Refrigerant: R134a Voltage: 110V (3.6 amps) Dimensions: 16.1" x 16.1" x 26" Wheels included CE Certified Max Head: 21.3 ft (6.5 m) Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.

Read more less

Chill your beer in the summer and warm your beer in the winter! Use a chill water source when it's hot or warmed water if it's cold! Temperature control during fermentation is one of the most significant contributors to the flavor of our beers, yet it all too often gets overlooked. This particular unit is designed to work specifically with the Brew Bucket Mini. Brewers typically have limited the styles of beers they produce to the varying temperatures of the seasons. The system is elegant and engineered, yet it stays true to the heart and soul of us home brewers. The FTSs uses a precision digital temperature controller in combination with a 304 stainless steel immersion chiller. The digital controller constantly monitors your beer’s temperature and will activate the circulation pump (which, by the way, is quieter than a mouse) to hold the fermentation temperature at your predetermined set point. You can crash cool or lager too! You supply the chill water source, which can be as simple as ice water in a cooler or as involved as glycol from a chiller’s reservoir. We supply the rest of the system. As long time fellow home brewers, this is a system we know many of you have been dreaming about for a long time: advanced temperature control for the beers you make at an affordable price. Features: Custom lid w/ 304 Ss immersion chiller coil Pro grade (super quiet) submersible pump 110-240V power supply 304 Ss weldless lid mounted thermowell Tailored neoprene insulation jacket Digital temperature controller

Read more less

Chill your beer in the summer and warm your beer in the winter! Use a chill water source when it's hot or warmed water if it's cold! Temperature control during fermentation is one of the most significant contributors to the flavor of our beers, yet it all too often gets overlooked. This particular unit is designed to work specifically with the 14 Gallon Chronical Fermentor. Brewers typically have limited the styles of beers they produce to the varying temperatures of the seasons. The system is elegant and engineered, yet it stays true to the heart and soul of us home brewers. The FTSs uses a precision digital temperature controller in combination with a 304 stainless steel immersion chiller. The digital controller constantly monitors your beer’s temperature and will activate the circulation pump (which, by the way, is quieter than a mouse) to hold the fermentation temperature at your predetermined set point. You can crash cool or lager too! You supply the chill water source, which can be as simple as ice water in a cooler or as involved as glycol from a chiller’s reservoir. We supply the rest of the system. As long time fellow home brewers, this is a system we know many of you have been dreaming about for a long time: advanced temperature control for the beers you make at an affordable price. Features: Custom lid w/ 304 Ss immersion chiller coil Pro grade (super quiet) submersible pump 110-240V power supply 304 Ss weldless lid mounted thermowell Tailored neoprene insulation jacket Digital temperature controller

Read more less

The German made 1.2 horse power MB Chiller is an ideal solution for nano breweries looking to chill up to 10 fermenters at once. The idea of the MiniChilly is that for each fermenter you want to a chill a pump kit is added. A pump kit (GLY35) includes a submersible pump that is placed in the cold bath of the Mini Chilly along with a digital controller that is placed next to your fermenter. Silicone tubing is included to make the connections. The digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don't have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool the liquid in your vessel to the desired set temperature. In this way each tank can be set at different temperatures. The MiniChilly is made by Quantor/Kreyer of Germany who is the largest manufacturer of glycol systems for breweries and wineries in the world. Made with high quality manufacturing and components, the MiniChilly is a durable system for many years of problem-free brewing. It is German made and we guarantee you will appreciate the build quality when compared to other chillers on the market. The unit features a stainless steel case with stainless 3/8" barbs in the top that allow for a clean connection of the silicone tubing that will run from each pump to each tank. The MiniChilly is able to chill its reservoir down to 21°F when a 30% glycol solution is used. The compact size and included casters make it easy to move around the brewery when needed. Applications: Cooling of Fermentation Cold Crashing for Brite Tanks Maintain Lagering Temperatures Compatibility: The MiniChilly can be used with any fermenter that has a built-in cooling jacket or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters. BrewBuilt Jacketed Uni Conical - You will need one Glycol Pump Kit for each tank. Ss Brewtech Fermenters and Brites with optional FTS Temperature Control Systems: Because FTS systems include a pump and controller you will not need to buy a separate Glycol Pump Kit. Spike Conical with Optional Cooling Package - Because the optional Spike cooling system includes a pump and controller you will not need to buy a separate Glycol Pump Kit. Speidel Tanks with Optional Cooling Jackets - You will need one Glycol Pump Kit for each tank. Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need one Glycol Pump Kit for each fermenter Blichmann Fermenators with Optional Cooling Coil - You will need one Glycol Pump Kit for each Fermenator. Capacity: Many chiller ratings are based on the theoretical power of the compressor, while the cooling capacity of the MiniChilly is rated at a realistic ambient temperature. This is much more useful for predicting the MiniChilly’s performance in real world applications. Of course, you could cool a greater number of smaller tanks but you’re ultimately limited to the 10 connections. Actual cooling capacities will vary based on the insulation of the tank. For the examples below we assume neoprene or better. Cooling Capacity Example: Up to 10 1BBL (31 Gallon) well-insulated tanks fermenting at 68°F in 80°F ambient temperature. For every fermenter you want to cold crash remove 4 fermenting fermenters from the capacity. Set Up: In order to hook up the MiniChilly to your fermenter or tank's cooling system, you will need 4 lengths of tubing per pump. All tubing connections should be secured with hose clamps. Length 1: Submersible pump outlet to inner barb of 1st bulkhead Length 2: Outer barb of 1st bulkhead to cooling system inlet Length 3: Cooling system outlet to outer barb of 2nd bulkhead Length 4: Inner barb of 2nd bulkhead to MiniChilly reservoir (should drain freely, no connection necessary) Technical Characteristics: Power: 110V-1Ph/50-60Hz Compressor Power: 1.2hp/900watts Cooling Capacity at 32°F glycol temp and 90°F Ambient Temp: 1.05 KW/1050 Watts (60Hz 110V) Cooling Capacity at 60°F glycol temp and 90°F Ambient Temp: 1.92 KW/1920 Watts (60Hz 110V) Stainless Steel Unit Water Temperature Range: 21°F - 86°F (-6°C - 30°C) Ambient Temperature Range: 50°F - 90°F (10°C - 32°C) Refrigerant R134a Free Glycol Water-Bath for Mini-Pumps Fittings 3/8" for Plastic Tubes of Individual Pumps Solid Wheels w/ Breaks for Easy Mobility Universal C19 Plug On/Off Switch Water-Level Sight-Tube Grooves for Individual Pump Cables Safety Inner Separation Water Side from Electric Side Tank Capacity: 12.68 gal. (48 L) Dimensions: 29.5"L x 15.75"W x 21.75"H Weight: 112.5 lbs Made in Germany CE Certified

Read more less

Chill your beer in the summer and warm your beer in the winter! Temperature control during fermentation is one of the keys to making world class beer at home. It can be difficult to achieve however, often requiring you to have a temperature controlled refrigerator dedicated to fermentation. Now with the FTSs temperature control package and either a Brew Bucket or Chronical,  you can maintain perfect fermenting temps all year.  This particular unit is designed to work specifically with the 14 gallon Brewmaster Edition Brew Bucket. The system is elegant and engineered to be as compact and affordable as possible. The FTSs uses a precision digital temperature controller in combination with a 304 stainless steel immersion chiller. The digital controller constantly monitors your beer’s temperature and will activate the very quiet circulation pump to hold the fermentation temperature at your predetermined set point. You can cold crash or lager too! You supply the chill water source, which can be as simple as ice water in a cooler or as involved as glycol from a chiller’s reservoir. We supply the rest of the system. As long time fellow home brewers, this is a system we know many of you have been dreaming about for a long time: advanced temperature control for the beers you make at an affordable price. Components: Custom lid w/ 304 SS immersion chiller coil Pro grade (super quiet) submersible pump 110-240 v power supply 304 SS weldless lid mounted thermowell Tailored neoprene insulation jacket Digital temperature controller Included vinyl tubing Required from you: Any type of cooler where you will add water and ice, or frozen jugs, to cool. You will submerse the included pump in the water.  To heat you can use a simple aquarium heater to raise the temperature of the water in the cooler A 14 gallon Brewmaster Edition Brew Bucket, FE804 Please Note: This Product is an add on for a 14 gallon Brewmaster Brew Bucket, and DOES NOT INCLUDE the brew bucket itself. 

Read more less

Advanced Modular Control System: Designed for homebrewers and microbreweries, the Brewtools FCS brings industrial-level precision with features like temperature, pressure, and gravity monitoring for ultimate brewing control. Comprehensive Starter Kit: Includes essential components such as FCS Display and I/O Modules, temperature and pressure sensors, and all necessary cables and adapters to start customizing your fluid control setup. Automated Fermentation Profiles: Automate cooling, heating, and pressure management with software-driven profiles, simplifying complex processes while ensuring consistency in your brews. Expandable & Customizable: Add solenoids, pumps, airlocks, and adapters to fit your specific brewing needs, compatible with both Brewtools and non-Brewtools tanks. Constant Monitoring & Alerts: Early warning notifications for equipment issues like solenoid valves or heating elements ensure smooth operation and protect your brewing investment. This version of the FCS Kit includes the Density/Temp Sensor which replaces the temperature-only sensor in the basic FCS Starter Kit. FCS is a modular control system designed, developed and manufactured by Brewtools in Norway. The vision behind the system is to take industrial technology and make that available for microbreweries and homebrewers. Using the latest electronic component technology and clever software engineering, Brewtools is able to make features that used to be very expensive and complicated available for everyone. The system can measure temperature, pressure, density/gravity*, level* and power consumption and based on that — control cooling, heating, pressure/CO2 in, pressure/CO2 out, agitation*, automatic hop additions* under pressure and more! Fermentation profiles will automate the whole process and give you ultimate control of your fermentation process. (*Not available at first launch.) The system will also constantly monitor the process and notify you if something isn't right. For example, the system will measure the current draw of solenoid valves and heating elements, and will notify you if these components aren't working as they should. Please Note: The software is currently in a state of early adopter beta, and should not be used for critical production. Brewtools will continue to develop software and new sensors/actuators based on customer feedback and requests. If you cannot find a sensor or actuator that fits your setup, please reach out to us and let us know. Note that we do not take responsibility for any lost/destroyed beer or raw materials. Brewtools FCS Starter Kit The Brewtools FCS Starter Kit includes all the essential parts to get you started setting up your own custom-designed Fluid Control System. FCS Display Module and FCS I/O Module with power supply 1 density/temp sensor (TC 1.5") 1 pressure sensor with gas out solenoid All cables and adapters needed (3m length) The kit does not include a valve/pump for cooling as these are tank dependent, and you may already have a solenoid for your existing glycol loop. For non-Brewtools tanks, you also may need an adapter and/or tee to connect the spunding valve/pressure sensor assembly. Accessories To complete your FCS kit setup, some accessories are needed. A solenoid for cooling (Ø4.5mm - 34mm or 1.5") with 2-pin LP12 cable and DIN43650 Type A adapter or a submersible pump (comes with cable). A ball clamp and a connecting rod. An airlock for the pressure out solenoid valve is recommended. For smaller tanks we recommend our polycarbonate airlock. For larger tanks (300L+) you should use a TC34mm to 12mm barb and a 10x16mm silicone tube or equivalent. Tri-Clamps and gaskets. Based on your tank and setup, you may need some extra tri-clamps or gaskets. For MiniUni+, you need to replace the Mini Spunding valve with an M24 to Tri Clamp adapter and a 90 degree TC34mm elbow to fit your spunding assembly (if you want to use our TC air lock. No need for elbow if you use tubing as airlock). Remember clamps/gaskets. If you don't have a Brewtools Unitank, we recommend getting a TC 1.5" to 34mm adapter for the spunding setup. You will also need a 34mm Tri-Clamp and 34mm gasket. Tees and crosses are also available in multiple sizes to give you more ports. Setting Up the FCS for Your Tank Mounting To mount to your tank a ball clamp and a connecting rod are very useful. This will work with most any size or style tank. Solenoid Valve & Related Connection Hardware for Cooling For Brewtools tanks that use 34mm connection you will need a Ø4.5mm - 34mm solenoid valve. For BrewBuilt, Spike, Ss BrewTech, or Commercial tanks you will need a TC 1.5" to 34mm adapter and 1.5" TC Solenoid Valve. Either way, you will need a 2-pin LP12 cable and DIN43650 Type A adapter to connect the solenoid valve to the Brewtools FCS I/O Module. Would You Like a Visible Air Lock on the Spunding Valve? The Brewtools pressure relief solenoid spunding valve releases CO2 at the set point you choose on your controller. To visually see the CO2 release, adding on an airlock for the pressure out solenoid valve is a nice option. For tanks under 300L, we recommend the 34mm polycarbonate airlock that connects to the Brewtools Solenoid Valve. For tanks larger than 300L, you should use a blowoff. For blowoffs, use a TC34mm to 12mm barb and a 10x16mm silicone tube or equivalent ran into a bucket of water. You will also need a 34mm Tri-Clamp and 34mm gasket. Tees and crosses are also available in multiple sizes to give you more ports. For the MiniUni+ For MiniUni+, you need to replace the Mini Spunding Valve with an M24 to TC adapter and a 90-degree 34mm TC elbow to fit your spunding assembly (if you want to use the TC air lock. No need for elbow if you use tubing for a blowoff). You will need the clamps/gaskets to make the connection. Starter Kit Included Parts: FCS Display Module, 5" FCS I/O Module 2x RTD, 5x CAN, 4x Relay Power Supply, 24V 40W, LP12-pin Pressure Sensor, CAN BUS 24V, M12 Solenoid valve, TC34mm + M12, DC24V Ø2.0 Density/Temp Sensor, TC 1.5", CAN BUS 24V Cable, LP12 6-pin, 3m Cable, LP12 5-pin, 3m (2 pcs) Cable, LP12-pin, 3m Adapter, LP12-pin to DIN 43650 Type B Recommended Separate Parts: Solenoid valve for cooling with adapters/cables or submersible pump Ball Mount connector and pipe clamp etc. Airlock (Top mounted or barb with silicone tube) Adapters and fittings to fit your tank Brewtools Product Number: 7713792

Read more less

Certified Food-Grade Propylene Glycol Inhibited Coolant 100% Concentrate for use in Glycol Cooling Systems in any Food Service application. Dilute with distilled water to the ratio specified in the instructions for your chiller. NSF Certified, food-grade inhibited propylene glycol fluid which is intended for use in antifreeze and heat transfer applications where contact with food may occur, such as wineries, micro-breweries, meatpackers, and other food-related industries.  Formulated with propylene glycol and an inhibitor system which is effective at preventing rust and corrosion in aluminum, brass, cast iron, copper, solder and steel-containing systems.  Operating Range: -50°F to 325°F (-46°C to 163°C) Application: HVAC system freeze/burst/corrosion protection Immersion freezing Cooling liquid foods Packaging carbonated beverages Fermentation cooling Refrigeration coil defrosting Cold room dehumidifying Conveyor roller defrosting Process cooling Process heating Waste heat recovery PLEASE NOTE: While Propylene Glycol is considered food grade this is not meant to suggest that it is safe for consumption. Always test your heat exchangers with water to check for pinhole leaks. In case of consumption please contact your local Poison Control Center immediately.  

Read more less

The Brew Bucket was the first product and the origin of Ss Brewtech, and for many brewers, the Brew Bucket was their first chance to ferment in stainless steel. Nearly a decade later, Ss challenged their engineering team to pair some of the newest technologies with the original design.   Brew Bucket Pure Flow Valve The star of the Brew Bucket 2.0 is the new Brew Bucket Pure Flow Valve. This valve uses Pure Flow technology, originally developed for the Ss line of professional brewhouses. The removable silicone membrane of the valve provides a sanitary environment where beer makes contact with nothing except silicone. Additionally, they have molded the racking arm geometry into the valve’s silicone diaphragm to provide a seamless flow path for beer when transferring from the Brew Bucket 2.0.   Sanitary Connection The valve attaches to the Brew Bucket using a welded external garden hose thread fitting that allows for a compact, easy-to-use connection without the need to fumble with additional clamps and gaskets. The threads are located externally and sealed by the gaskets built into the Pure Flow silicone, keeping them clean and sanitary. With the new valve design, the brewer can fully rotate the racking arm 360 degrees for maximum control while racking a finished beer.   Conical Base The Brew Bucket 2.0 continues what made the original a great solution for home brewers. The pro-inspired conical base helps minimize trub interaction with fermented beer, thus limiting any concerns of off flavors produced during maturation. Combined with the rotatable racking arm, brewers can effortlessly rack off clean beer like the pros do in craft breweries.   Full Width Lid The Brew Bucket 2.0 features the same full-width removable lid as the original, with a wide access opening that makes cleaning and sanitizing a breeze. Finally, the included thermowell has been repositioned to the lid, and the increased length allows for accurate readings, even when brewing partial batches.   Features Pro-Inspired Conical base Blow off port in lid for airlocks or blow off tubing Rotatable Silicone Racking Arm Pure Flow Valve for transfers and gravity samples 304 Stainless Steel 7 gallon capacity 300m Thermowell Thermometer | LCD Temp Display Module Dual Temp Wide lid with secure spring clamps Etched volume markings gals/liters Welded carry handles Surface safe Silicone Feet Specs: Tank Size: 7 gal Batch Size: 5 gal Dimensions: 24" H x 13" W x 13" D Weight: 11 lbs  

Read more less

White Grain Sorghum Extract can be used as a 100% substitute for LME to make gluten-free beer Syrup made from 100% white sorghum grain Neutral flavor and produces a tan to light brown liquid Briess Malt & Ingredients has had a focus on quality and innovation for more than 140 years, with all of their products being made in the U.S.A. This gluten-free, hypoallergenic, non-GMO extract functions as a 1:1 substitute for LME for 100% extract brewing to produce gluten free beer. It can be used in any recipe as a unique liquid adjunct to boost initial gravities while increasing overall brewing capacity due to its unique, mild flavor. You can use with concentrated worts to produce almost any beer style. Sorghum Syrup: gluten free, hypoallergenic, non-GMO extract functions as a 1:1 substitute for LME for 100% extract brewing to produce gluten free beer. Typical Analysis: Color (8° Plato): 3 SRM Fermentability: 75% Solids: 79%

Read more less

Flash Brewing® Kits from MoreBeer!® require only 10 minutes to brew. Just mix and ferment. Mosaic ® and Citra ® combine their complementary hop flavor profiles for a crowd-pleasing, easy-drinking Pale Ale Flavored with Mosaic ® & Citra ® Cryo Hops® Estimated ABV: 5.8% Estimated IBUs: 30 Makes 5 gallons of finished beer Best Buds Pale Ale Flash Brewing® KitMosaic ® and Citra ® are fantastic hops on their own, but together they create an even more impressive combination. This iconic duo is known for their complementary aroma compounds, making them arguably the most famous hop pairing ever. The tropical hop flavors are enhanced by a light malt profile and smooth bitterness, resulting in a crowd-pleasing, easy-drinking Pale Ale that you’ll always want on tap for your best buds. Flash Brewing® KitsIntroducing MoreBeer!'s Flash Brewing® Kits! Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. This streamlined process not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home. Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing® eliminates the need to boil. Our Flash Brewing® malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets for flavor. Flash Yeast™ starts quickly and consistently produces clean beer that lets the malt and hops shine. The result is a high-quality beer that will absolutely surprise you. If you want to read more about the development of Flash Brewing® at MoreBeer! or have more questions please read our Frequently Asked Questions. Equipment Required for Flash Brewing®Flash Brews can be fermented in any wide mouth 6 or 7-gallon fermenter you already own. We suggest a wide mouth fermenter so you can easily pour in the ingredients. The 7-gallon Fermonster fermenter is a perfect choice. If you are new to brewing and need a fermentation kit, See related product. Includes: Best Buds Pale Ale Flash Malt™: 6 lbs Mosaic® Cryo Hops®: 1 oz Citra® Cryo Hops®: 1 oz HopBite™: 30 IBU Shot Flash Yeast™ Flash Brewing® Instructions Flash Brewing® recipe kits do not include priming sugar. For bottling, we recommend PopTops™ Swing Top Bottles and Pop Shots Carbonation Tablets. Citra® and Mosaic® are registered trademarks owned by Hop Breeding Company. Cryo Hops® is a registered trademark owned by Yakima Chief Hops, LLC.  

Read more less

Due to high demand, the 7 bbl is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more in mid April. Oil-based brewing system that closely mimics a large-scale steam-powered system Heated oil is circulated around jacketed tanks to heat with a large surface area. All the benefits of steam without the complexity of a steam generator Lower electrical requirement for installation compared to electric brewhouses with immersion elements Insulated vessels for high heating efficiency Compact brewing system with no need for additional electrical controllers, components, or extensive wiring. All pumps, piping, and fittings included No heating elements in direct contact with wort. Zero risk of scorching and easy to clean 1 bbl to 3.5 bbl systems available with or without mash rake. 5 bbl and above come with mash rake as standard 7 bbl systems and above feature a brew deck and CIP ring below the mash tun to clean the underside of the mash screen 3 Vessel systems are ideal for breweries that intend to use this unit as their primary brewing system 208V, 3-phase power is the standard configuration for all systems. Customized power configurations available upon request (see below) For detailed power specs, dimensions, and shipping quotes contact our MoreBeer! Pro sales representatives today! Compared to the traditional steam heating brewhouse, the creative new-tech thermal oil heating avoids the installation of a dangerous and high-maintenance steam boiler. Steam offers more surface area than gas fired, but it requires a generator to create steam, collect it, and reheat it again. Oil heated brewhouses, on the other hand, use a simple oil heater and pump to circulate oil through the tank jackets. Compared to gas fired systems where all heat is directed to the very bottom of the kettle, this system heats from the sides and the bottom rather than the bottom alone. This offers not only greater surface area but faster thermal response. By controlling the oil temperature, you also have more precise boil vigor control and evaporation rate control. For these reasons and more, the Oil Heated Brewhouse makes for an ideal pilot batch system. Control Panel Our control panel features 4 PID controllers for precise control of the HLT, Mash, Boil Kettle and Oil temperature. The control panel also features a delayed start timer, allowing you to preheat your HLT overnight so your strike water will be ready when you arrive on brew day. Hard Piped Distribution Manifold With the distribution manifold, the entire brewing process can be completed by simply opening and closing valves. There’s no need to lug around brewery hoses and swap connections from vessel to vessel. This hard piped system is completely self contained with dedicated pumps to move wort and hot liquor from tank to tank as needed. Every step of the brew day is a simple valve turn away. The only hose required is from the brewing system to your fermenter. Once the brew is completed this same piping system is used for CIP and rinsing. Installation The systems are delivered on a skid. Simply, move the skid into place, hook up power and water and a drain and you are ready to clean and brew. Our systems also feature rolling casters for easy installation in your brewery, product pump for recirculation and sparging, hard piped manifold, grain out door on the mash tun, and mounted plate chiller. Design Features: 3-Vessel System with dedicated HLT, Mash Tun, and Boil Kettle Compact design and easy installation Built-in wort pump Built-in HLT pump Built-in 2-stage heat exchanger Hard piped distribution manifold Built-in control panel PID controls for kettle temperatures and oil temperature Slotted Mash Screen Tangential kettle return for whirlpool Built-in CIP Water inlet & hot water drain in 1.5" T.C. Insulated tanks for heat retention and heating efficiency Boil kettle features steam collector which eliminates the need to install a flue in your brewery Hot oil vessel can operate at higher temperatures, that means 25% higher heating efficiency: Oil temperature set at 302°F (150℃) [available up to 572°F (300℃)] from 82°F to 140°F (28°C to 60℃), heat-up time: 20 min from 140°F to 176°F (60°C to 80℃), heat-up time: 20 min from 176°F to 212°F (80°C to 100℃), heat-up time: 30 min Higher heating efficiency compared to steam heating Simultaneous heating of HLT, mash tun and kettle to save time 100% 304 Stainless Steel TIG welded tanks Laser welded dimple jacket and tank bottom Manufactured in strictly controlled ISO9001 certified facility 208V, 3-phase power* *MB Stainless offers custom voltage oil systems. 240V single-phase systems available up to 5bbl. MB also produces 480V 3-phase systems in all sizes. Contact our sales representatives for pricing, lead time and delivery information. Food-grade thermal oil not included. We recommend PARATHERM™ MR HTF or an equivalent low odor, food grade, thermal transfer fluid.

Read more less

Due to high demand, the 310 gallon is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Self-contained brewing system purpose-built for producing large batches of cold brew coffee Cold brew temperature is maintained via coolant circulated around the jacketed tank Rake system ensures all coffee grounds and water are thoroughly and evenly mixed Built-in pump recirculates and clarifies the coffee when extraction is complete 217 Gallon system and above feature coffee ground hydrator and integrated brew deck For detailed power specs, dimensions, and shipping quotes contact our MoreBeer! Pro sales representatives today! The MB Cold Brew Coffee System is a self-contained electric brewhouse used for producing commercial batches of cold brew coffee. After coffee grounds and water are added to the tank, the mixing rake system ensures even distribution and full infusion of grounds and water. Program your preferred brewing temperature between 35-80°F, and the controller will automatically circulate coolant through the tank's cooling jacket to maintain your set temperature. When extraction is complete, the coffee is recirculated until it runs clear, and then passed through a filter on its way to a holding tank where it can be stored until packaging. For additional filtration when transferring liquid to your holding tank, check out the optional Filter Tank. Features: Button control panel Glass grant w/ CIP Viewing port Coffee ground hydrator (7 bbl & above) Brew deck (7 bbl & above) CIP ring below the tank to clean the underside of the screen (7 bbl & above) Liquid level sight gauge Built-in centrifugal pump Pipeline sight glass Square manway & chute All tri-clamp butterfly valves / fittings included 208V 60Hz, 3-Phase Required Power: 31 Gal: 1.3 kW 62 Gal: 1.5 kW 93 Gal: 1.5 kW 155 Gal: 1.85 kW 217 Gal: 1.85 kW 310 Gal: 3 kW Approximate Dimensions: Length (in.) Width (in.) Height (in.) 31 Gal 63 49 71 62 Gal 65 63 77 93 Gal 69 67 85 155 Gal 77 69 93 217 Gal 93 73 98 310 Gal 98 79 102

Read more less

BE-256 is recommended for a range of Belgian type beers such as abbey style known for its fruitiness and high alcohol content Formerly known as "Abbaye", this strain ferments very fast with a very high attenuation percentage Fermentis active dry yeast offers reliability, ease-of-use, and consistency to home and professional beverage makers across the world Abbey style beers are known for their high alcohol content and mild estery flavors, and brewing them is best done with a suitable yeast strain. Safale BE-256 (formerly called Abbaye) ferments fast with very high attenuation, contributing subtle, well-balanced aromas. In high-gravity brews, it can produce beers with up to 11% ABV. Or used for lower-alcohol styles, it gives a dry, crisp finish that makes for refreshing session beers or other light styles. This yeast can be pitched directly, but if you prefer to rehydrate, the instructions are below. Sprinkle the yeast in a minimum of 10 times its weight of sterile water or wort (we suggest 4 oz) at 70°F to 77°F (21 to 25 °C). Do not stir. Leave to rest 15 to 30 minutes. Gently stir for 30 minutes, and pitch the resultant cream into the fermentation vessel. Attenuation: 82-86% Sedimentation Time: Fast Alcohol Tolerance: 9-11% ABV Optimum Fermentation Temp: 64-78°F *See the technical data sheet below for more information on rehydration, usage and storage.  

Read more less

Flash Brewing® Kits from MoreBeer!® require only 10 minutes to brew. Just mix and ferment. This German-style Wheat Beer recipe allows Hefeweizen yeast to shine at the forefront of the flavor profile Flavored with Hallertau pellet hops Estimated ABV: 4.9% Estimated IBUs: 15 Makes 5 gallons of finished beer German Hefe Flash Brewing® KitThis German-style Wheat Beer has a lovely blond color and a distinctly hazy appearance in the glass. Using 100% Bavarian Wheat malt extract and a dash of German Hallertauer hops provides just enough bitterness and hop flavor to balance the malt and yeast character. Our German Hefeweizen is a customer favorite! Flash Brewing® KitsIntroducing MoreBeer!'s Flash Brewing® Kits! Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. This streamlined process not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home. Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing® eliminates the need to boil. Our Flash Brewing® malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets for flavor. If you want to read more about the development of Flash Brewing® at MoreBeer! or have more questions please read our Frequently Asked Questions. Equipment Required for Flash Brewing®Flash Brews can be fermented in any wide mouth 6 or 7-gallon fermenter you already own. We suggest a wide mouth fermenter so you can easily pour in the ingredients. The 7-gallon Fermonster fermenter is a perfect choice. If you are new to brewing and need a fermentation kit, See related product. Includes: German Hefeweizen Flash Malt™: 5 lbs Hallertau Hops: 1 oz HopBite™: 15 IBU Shot Fermentis WB-06 Dry Yeast Flash Brewing® Instructions Flash Brewing recipe kits do not include priming sugar. For bottling, we recommend PopTops™ Swing Top Bottles and Pop Shots Carbonation Tablets.  

Read more less

S-33 is an ideal strain for enhancing the hoppy and fruity expressions of your beer Fruit-forward character and imparts a high mouthfeel and body to the beer Especially recommended for Belgian Ales, strong English ales, and New England IPAs and Hazys Fermentis active dry yeast offers reliability, ease-of-use, and consistency to home and professional beverage makers across the world If you’re going for a custom-made Belgian style beer you’ll want to keep some of this dry yeast on hand. Safale S-33 is a great yeast strain for Belgian style beers, such as Belgian wheats and Trappist-style Ales. Provides the characteristic phenolics of beers in Belgium. This yeast can be pitched directly, but if you prefer to rehydrate, the instructions are below. Sprinkle the yeast in a minimum of 10 times its weight of sterile water or wort (we suggest 4 oz) at 70°F to 77°F (21 to 25 °C). Do not stir. Leave to rest 15 to 30 minutes. Gently stir for 30 minutes, and pitch the resultant cream into the fermentation vessel. Attenuation: 68-72% Sedimentation Time: Medium Alcohol Tolerance: 9-11% ABV Optimum Fermentation Temp: 64-78°F *See the technical data sheet below for more information on rehydration, usage and storage.

Read more less

The Pro Pilot System is a true turnkey brewhouse including virtually everything YOU need to get up and running FAST! Perfect for taprooms, pilot systems and neighborhood breweries. No fuss, no hassle, just pure pro brewing power! These systems will ship via freight with lift gate to anywhere in the contiguous United States. There is a $500 flate rate fee for shipping from the manufacturer which is already priced into the cost of the system. 3 - BoilerMaker™ Kettles Made in America. Single piece construction from US made stainless steel. Heavy gauge 304 stainless steel. Linear Flow Valve disassembles in seconds for cleaning, allows precise control of flow, and orients in any direction. Rivet free handles, rugged cool touch grips, oriented for easy carrying. Borosilicate glass level gauge. Diptube with rotating racking arm. Lifetime limited warranty on kettles. Accessories Patented button louver false bottom. AutoSparge™ automatically sets the hot liquor flow rate and liquid level in your mash tun.  Adjustable viewing angle thermometer. Whirlpool fitting in boil kettle.   2 - 240V BoilCoils™ Less than 30 W/in² nearly half of the typical ultra low watt density for easier cleaning and scorch free brewdays. Each BoilCoil™ is engineered to preform optimally in your BoilerMaker™ G2 brew kettle for consistent heating performance, boil quality, and boil-off rates. Robust stainless steel construction. Less than ultra low watt density means NO chance of scorching when used as directed. The 240v BoilCoil™ includes a 12 ft factory wired cable with a molded twist lock L6-30P plug. Removable custom engineered plug means cleaning is a snap.   2 - RipTide™ Brewing Pump Ultra quiet motor. Tri-Clamp disassembly for easy cleaning. Integral linear flow control valve.   2 - Tower of Power Temperature Controllers PID Temperature control. On/off/auto mode selector switches. Class A precision RTD temperature sensor. Controllers are table mounted for convenience. Compact enclosure. Brushed stainless cover and gloss black powder coated case that will look beautiful for years.   Heavy Duty Custom Table 14 ga 304 stainless steel. Apron to mount accessories. Legs and lower shelf are stainless. Built-in receptacle boxes. Heavy duty casters for mobility. Adjustable height lower storage shelf. Made in USA.  

Read more less

Glass for spunding valve. Material: Polycarbonate (PC) See picture for measurements.

Read more less

For cleaning: Circulation / Clean In Place systems Brewery and beverage systems Stainless steel cleaning / passivation This peroxide based booster gives your CIP products an extra punch to loosen up and remove organic soils. It works great on heat exchangers and tanks or lines with hard to reach areas. Specifications: Color: Colorless Fragrance: None pH Range: 5.0 - 5.5 Dilution: 1 - 2 oz. / solution Density: 9.59 HAZMAT: UN2984 DOT HAZMAT - 5.1 Hydrogen Peroxide, Aqueous Solution (with 17.5% Hydrogen Peroxide) NOTE: This product is an oxidizer, it can only ship with other oxidizers. This CANNOT be shipped on a consolidated pallet with most other products from SIS Brew. Please note: Intended for commercial use. Due to HAZMAT shipping restrictions, this product is required to ship via freight. It will ship directly from the manufacturer on its own pallet. If you order multiple SIS products, they will be condensed onto a single pallet, unless your order also contains sanitizers. Sanitizers must be shipped on a separate pallet from caustics and acids. HAZMAT items are not able to be returned.

Read more less

Flash Brewing® Kits from MoreBeer!® require only 10 minutes to brew. Just mix and ferment. This German-style Wheat Beer recipe allows Hefeweizen yeast to shine at the forefront of the flavor profile Flavored with Hallertau pellet hops Estimated ABV: 4.9% Estimated IBUs: 15 Makes 2 gallons of finished beer German Hefe Flash Brewing® KitThis German-style Wheat Beer has a lovely blond color and a distinctly hazy appearance in the glass. Using 100% Bavarian Wheat malt extract and a dash of German Hallertauer hops provides just enough bitterness and hop flavor to balance the malt and yeast character. Our German Hefeweizen is a customer favorite! Flash Brewing® KitsIntroducing MoreBeer!'s Flash Brewing® Kits! Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. This streamlined process not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home. Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing® eliminates the need to boil. Our Flash Brewing® malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets for flavor. If you want to read more about the development of Flash Brewing® at MoreBeer! or have more questions please read our Frequently Asked Questions. Equipment Required for Flash Brewing®Flash Brews can be fermented in any wide mouth 3-gallon fermenter you already own. We suggest a wide mouth fermenter so you can easily pour in the ingredients. The 3-gallon Fermonster fermenter is a perfect choice. If you are new to brewing and need a fermentation kit, See related product. Includes: German Hefeweizen Flash Malt™: 2 lbs Hallertau Hops: 0.5 oz HopBite™: 15 IBU Shot Fermentis WB-06 Dry Yeast Flash Brewing® Instructions Flash Brewing® recipe kits do not include priming sugar. For bottling, we recommend PopTops™ Swing Top Bottles and Pop Shots Carbonation Tablets.  

Read more less

LalBrew® LoNa™ is a maltose-negative hybrid strain selected for its ability to produce of low and non-alcoholic beers Non-GMO Saccharomyces cerevisiae strain that produces a clean and neutral aroma profile with no phenolic flavors LoNa™ does not consume maltose or maltotriose, resulting in very low attenuation Lallemand premium brewing yeast offers brewers unmatched consistency, reliability and purity from one batch of beer to the next LalBrew® LoNa™ is a maltose-negative hybrid strain that has been selected to have ideal characteristics for the production of low and non-alcoholic beers. Advanced classical and non-GMO breeding methods were used to select a strain that does not consume maltose or maltotriose, resulting in very low attenuation. LalBrew® LoNa™ is the first maltose-negative Saccharomyces cerevisiae strain specifically selected for beer fermentations. As a S. cerevisiae strain, LalBrew® LoNa™ performs like an ale producing a clean and neutral aroma profile, no phenolic flavors, and significantly reducing aldehydes that cause worty flavors. Additionally, the patented technology from the University of California Davis ensures that the strain will not produce sulfurous off-flavors, allowing the malt and hop flavors to shine through. Pasteurization is required when brewing with LalBrew® LoNa™ to avoid fermentation after packaging and ensure beer stability. Beer Styles: Any low or non-alcohol ale styles Aroma: Clean and neutral, no POF or sulfur, wort flavors absent or minimal Attenuation: Very Low Fermentation Range: 68-77°F (20-25°C) Flocculation: Medium *See the technical data sheet below for information on rehydration, usage and storage.

Read more less

Another great addition to your Ss Brewtech Chronical fermenter. This shelf adds stability to your Chronical, especially when using leg extensions, and gives you a handy place to set things like your blow off vessel. NOT FOR LEGACY 7 GAL CHRONICAL - There are no threaded inserts in the leg bottoms for this to mount to on the 7 gal Legacy Chronical. Features: Made from 304 stainless steel Great place to put your blow off vessel Adds stability when using leg extensions Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less