Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late March.
The RipTide™ (Tri-Clamp model only) has been taken to the next level with a design modification to be the ultimate work horse. Now it eliminates the easy-to-loose thrust washer and showcases a PRV vent barb that will allow for mess free priming. This version will improve the overall brewing experience and operation. Again, this change is currently only on the TC RipTide™.
Gone are the days of making do with a general purpose pump such as the March 815 and all the variant imported copies. These pumps are cumbersome to disassemble, difficult to prime to get the wort moving, require the addition of a valve, a switch, and a proper base to hold the pump upright. They also use noisy open motors that must be shielded from liquids. All undesireable attributes for a homebrewing pump! The team of homebrewers at Blichmann Engineering and our friends at March Manufacturing have created the RipTide™ to solve all of these problems!
High performance curved blade impeller and strong rare earth magnets deliver 7 GPM and up to 21ft of head pressure!
Carbon Fiber Dry Run Protection increases the life of your impeller and resists damage during accidental dry runs
Tri-clamp head connection fully disassembles in seconds for easy cleaning
1.5" tri-clamp inlet and outlet connections
Totally enclosed motor is splash proof and super quiet (50 dB)
Integral linear flow valve for superior flow control - don't spend more money for a separate valve and fittings.
Integral air vent valve and partially enclosed impeller design allows you to prime the pump in seconds - no more frustrating air locked pumps!
Stainless steel head rotates 360 degrees to fit in virtually any installation
Large stable base with protective rubber feet keeps the pump from tipping
Convenient power switch on the base
Includes a 10ft long cord with plug (120V)
Base acts as a cord wrap for convenient storage
Assembled in USA from USA and imported components
The History of MoreBeer! & March Many years ago MoreBeer! worked with March Pumps to release what is now the standard pump in the homebrewing community, their model 809 (our H315) with a polysulfone head and 6' cord with plug. Thousands and thousands of these pumps have been sold to homebrewers. The New Design Now, with a slight design modification, the new model nearly eliminates past cavitation issues (where the impeller spins in an air pocket and no liquid moves). We've been testing/using the pump with our BrewSculptures for several years now and are extremely happy with the results, so much so that we are completely replacing the H315 with the high flow model. Still Works the Same The new model comes with all the great features of the original - magnetic drive, handles flow restriction, okay for boiling temperatures, 6' cord with plug, food-grade materials in contact with the liquid, 1/2" ports, etc. - but now features a different slightly higher flow rate with less issues of cavitation. The magnetic drive in a March pump acts as a clutch allowing the user to put back pressure on the pump to slow down flow. Since it is magnetic drive, it is not self-priming, you must put the pump below the level of the liquid source. This pump cannot be run dry. Additional Notes To restrict flow place a ball valve on the out flow of this pump. This is the pump we install and use on all of our BrewSculpture brewing systems. We stock polysulfone replacement heads, H317, in case the threads are damaged. If you are looking for a pump for a larger home brewery or small nano brewery you can also look at our H325 Nano Brewery pump from March. Features List Included bracket for mounting 6' power cord with plug wired in for easy use 115V - 50/60Hz Maximum flow of just over 7 gpm (at zero head) Maximum head of 18 feet (at zero flow) 1/2" mpt fittings on both inlet and outlet. Materials in contact with solution: Polysulfone, 316 stainless steel, silicone rubber, Ryton and Teflon 1/25 hp, continuous-duty, thermal overload protected, single phase 1.4 Amp motor Motor is fan cooled Will handle internal pressures to 50 psi. Max temp rating: 250F Face unscrews and rotates at 90 degree intervals to adjust to your application. Note: When using silicone tubing, we recommending using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend our 5/8" barb (H620), to help ensure a better seal!
Designed for the small 'Nano' commercial brewery where the H315 series is too small but you don't yet need a full on expensive professional brewery pump. The March Nano Brewery Pump features a robust flow rate of 17 GPM with all the benefits brewers have come to expect from March magnetic drive pumps. Those features include the ability to throttle back flow and the use of food-grade materials where the beer is in contact with the pump.
*Please Note* - This pump must be taken apart and cleaned after every use to prevent the impeller from seizing. To do so, take the bolts out of the pump head, remove the pump head from the pump, then take the impeller shaft and actual impeller apart. Clean well, and reassemble.
Homebrewing Tips:
1. Great for Whirlpooling 20 gallons of wort or more.
2. Ideal for our Counterflow Chillers WC90.
Please note that the pump comes with a three foot cord WITHOUT a plug attached. It has a 16 gauge 3 wire setup.
Statistics
Motor: 1/8HP 110v/60Hz Max Flow: 17 G.P.M at zero head
Max Head: 27 ft. at 1 GPM
Inlet: 1" FPT
Outlet: 1/2" MPT
Materials in Contact with Beer
Polysulfone
Stainless Steel
Buna N
Ceramic
Specifically designed for the professional “Nano” brewery.
The reliable Nano Brewery Pump by March is designed for the small commercial brewery, where the H315 series is too small but you don't need an expensive, large-scale brewery pump. Featuring a robust flow rate of 17 GPM and a magnetic drive which allows you to throttle back flow without damaging the motor. The Nano Pump employs food-grade materials anywhere it comes in contact with your beer.
Please Note: This pump must be taken apart and cleaned after every use to prevent the impeller from seizing. To do so, take the bolts out of the pump head, remove the pump head from the pump, then take the impeller shaft and actual impeller apart. Clean well, and reassemble.
Materials in Contact with Beer
Housing - Stainless Steel
Impeller - Polysulfone
O-Ring - Buna N
Thrust Washers - Ceramic
Statistics
Motor Output: 1/8HP/0.94KW
Max Flow: 17 G.P.M at zero head
Max Head: 27 ft. at 1 GPM
Inlet: 1" FPT
Outlet: 1/2" MPT
Pressure: Max. internal pressure is 200 psi
Temperature Range: 250F/121C
Electrical Connection: 115V 50/60HZ. Please note that the pump comes with a three foot cord WITHOUT a plug attached.
A larger impeller than what comes in the standard "809" pump. These help to prevent cavitation in the pump head. Designed for our old H315 and new H315HF pumps. Will also fit and improve H350 and H375 pump heads.
A Stainless Steel pump housing is food-grade and nearly indestructable. Exact same internal pump as our H315 but with a stainless steel housing. Stainless steel is the material of choice for professional breweries because it is a durable, food-grade metal that can withstand caustic chemicals and can also be effectively sanitized. 3/4" mpt on center inlet. 1/2" mpt outlet.
The magnetic drive acts as a clutch allowing the user to put back-pressure on the pump to slow down flow. With a ball valve on the outflow, you can slow flow all the way to nothing. Since it is a magnetic drive, it is not self priming, you must put the pump under the level of the liquid source. We wanted the pump to be brewer friendly so we had March install a bracket so that it can be mounted. We also had a 6' power cord with plug wired in for easy use. This is a tough little pump with a 1/25 hp, continuous-duty 1.4 Amp motor which can be run non-stop for extended periods. This pump has a maximum flow of 7.2 GPM with a maximum head of 12 feet. For an example of typical usage: with a head of 6' it will pump 3.25 GPM and with an 8' head it will pump 2.5 GPM.
Motor requires 115v 50/60HZ power requirements.
This is a replacement assembly for our H315HF pump. It has the polysulfone head and the impeller as well. This unit is set up with the new impeller, and will replace the head of an H315HF unit, or upgrade an older H315 to the High Flow model.
Translucent, food-grade tubing temperature rated to 500F.
Odorless, tasteless, and inert Silicone tubing is FDA food-grade approved from -100F to 500F. Translucent natural color allows you to see the flow. The perfect tubing for building a personal brewery, especially for any time that the wort in contact with tubing will be above 180F. This tubing is not designed to hold pressures above 20psi. It works great with our magnetic drive pumps such as a March or Chugger pump, but we do not recommend it with a impeller pump or for use with household water pressure.
Platinum Cured
Quantity ordered will be shipped as multiple pre-cut lengths. Maximum length available is 100 ft.
*Will burst at 30 PSI at 70F.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late March.
Designed specifically for cleaning draft lines, this hand pump pressurized keg is easy to use and doesn't need CO2 like many other line cleaning kegs. After filling the keg with cleaning solution, unscrew the beer line from your sanke coupler and attach it to the included beer thread coupler to hook it up directly to the cleaning keg. Pumps from the bottom to the top, allowing you to leave the cleaning solution in the line for 15 minutes. We recommend cleaning your lines every time you switch out a keg or every 6 weeks, whichever comes first.
1 gallon capacity
Comes with a 3/16” x 5/16” hose
Included Female Beer Thread (5/8" BSP) Coupler
Also Included:
Beer Line Cleaning Brush
With 8" length and 5/8" diameter, this brush is ideal for cleaning keg couplers, draft faucets, 3-Piece airlocks, 1/2" bottle fillers, and 3/8" or 1/2" spigots. Features a coated tip to prevent scratching or damaging surfaces.
Draft Beer Faucet Brush and Plug
Keep fruit flies and other bugs out of your draft beer faucets when not in use. This plug style brush will clean the faucet nozzle on the way in and when pulled out. It works with standard beer faucets and Intertap, NukaTap, and Perlick brand faucets.
Double Shank and Faucet Wrench
Draft wrench designed to tighten the hex nut on the back of a faucet shank. Well suited for keezers or even draft towers. Features a pin wrench for tightening the faucet coupling ring where your faucet attaches to the draft shank.
The Blichmann Universal CIP Spray Ball kit can be custom fitted to any fermentor, kettle, keg cleaner and more! All that's needed for mounting is a simple 7/8" hole. Designed to work perfectly with the RipTide Brewing Pump and the March 815 series pumps.
Full stainless steel construction
Installs anywhere with a 7/8" hole
Requires 7 gpm pump flow
Use this barbed fitting with our 1/2" ID Silicone tubing for a better fit. Because Silicone tubing is soft and flexible it actually fits much better on this over sized 5/8" OD barb than on a 1/2" OD barb.
Designed and made by MoreBeer! to maximize flow this fitting is also perfect for use when a March or Chugger High-Flow pump as it allows a larger volume of wort to enter the pump, decreasing instances of cavitation.
Please note: If using 1/2" ID vinyl tubing, we recommend using hot water to heat the tubing up for easier insertion. Not recommended for use with thick wall 1/2" vinyl tubing.
10-gallon propane systems are regularly stocked and ready to ship!
Single tier brew system. Look into and interact with every kettle without the need for a step stool or ladder
Digital Touchscreen Controller comes standard. Control every aspect of your brew day from a single screen
Automatic HERMS mashing. Set up to five mash steps in the digital controller and temperatures will be raised and be maintained automatically
Powerful Gas Burners. Whether you choose Propane or Natural Gas as your fuel source, your burners will be fast, efficient, quiet and have great flame control
The Ultimate Sparge Arm. Eliminate hot side aeration with this fully adjustable sparge arm
Built to order in the USA. Every system features a custom-welded stainless steel frame manufactured in the BrewBuilt metal shop
Brew like a pro with the BrewBuilt Low Rider BrewSculpture. Our brewing systems were first introduced in the 1990’s and now have over two decades worth of R&D and customer feedback built into their design. There’s a reason why top level breweries like Sierra Nevada and Russian River use a BrewBuilt BrewSculpture for training, ingredient testing and pilot batches.
Touchscreen Control Panel
From heating strike water to whirlpooling hop additions, you’ll orchestrate your entire brew day from our custom designed 7” touchscreen control panel. The HLT burner and pumps can be controlled from a single touchscreen controller. Program your mash steps and the controller will do the rest—igniting burners and kicking on pumps to recirculate wort as needed. It also offers boil addition timers to remind you when to add hops or clarifiers, as well as manual control of your pumps.
Control Panel Key Features:
Programmable HERMS Mash Steps - choose from 3 preset mash schedules or custom design your own with up to 5 steps. From there the control panel guides your mash through the temp raises and time rests automatically.
Always Hot - Controller maintains the Hot-Liquor tank temperature you choose by turning the burner off and on automatically.
Auto Sparging - Sparge water flow is controlled automatically with integrated Mash Tun float switch.
Timer Alarms - Built in boil timers remind you when to add hops, finings, or anything else.
Manual Mode - allows you to control pumps for anything you want such as cleaning.
Automatic HERMS Mashing
Mash temps are maintained via the HERMS coil made from convoluted copper tubing. This top-of-the-line coil design offers unparalleled efficiency while gently heating your wort. Choose from your saved mash schedules or program one on the fly. When the mash begins, the controller will automatically maintain the temperature of the hot liquor bath that the HERMS coil rests in. When the wort temp drops below your set point, the controller will turn on the pump to circulate wort through the coil. You can also set the pump to continuously circulate wort for the whole mash if you prefer, and the HLT will continue to maintain your mash temp automatically. When each mash step is complete, the controller will turn on the burner to raise the temperature of the HLT and begin the next step.
Powerful Gas Burners
Choose your fuel source! Natural Gas is a nice option for the brewer whose home is already supplied with natural gas. This is a convenient option since you will never have to refill propane tanks, and you will never run out of gas mid batch. However, you do lose the freedom to move your BrewSculpture™ once it has been hard plumbed to your gas line. Whether you prefer the mobility of using propane or the reliable supply of natural gas, your burners will be fast, efficient, quiet and have great flame control.
The Ultimate Sparge Arm
No other system protects against hot side aeration quite like the BrewSculpture. While other systems simply pump wort back to the top of the mash tun and let it splash back down over the grain bed, the Ultimate Sparge Arm will make sure your wort circulates with virtually zero aeration. The Ultimate Sparge Arm features adjustable height and adjustable flow. Depending on what beer you’re brewing, the surface of the mash will be at different heights. Simply lower the sparge arm to just below the surface of the mash and your recirculation will be splash-free. The ball valve at the inlet of the sparge arm allows you to dial in the flow and reduce turbulence as you see fit.
Custom Welded Frame Made in the USA
Every BrewBuilt BrewSculpture is made to order and built around a custom TIG welded 304 stainless steel stand. While other companies cut corners by using generic stainless steel tables for their systems, our extra beefy stand is fabricated in our California-based metal shop and designed to outlive even you. Every stand comes with rolling casters and folding handlebar so you can easily move your system whenever needed.
What Sets the Digital BrewSculpture Apart?
Only system with a heavy-duty, purpose-built, welded stainless frame as standard.
Only system with digital touch screen as standard.
Only system with programmable mash steps on touch screen.
Welded fittings for a lifetime of easy-to-clean, leak-free performance.
Ultimate Sparge Arm reduces hot side aeration.
Keep sparge water warm while preheating the boil.
Key Features of the Low Rider BrewSculpture
Made in USA by BrewBuilt
304 Stainless Steel TIG welded stands. The ultimate frame material that will outlast you. No paint or powder coating.
Every BrewSculpture includes folding handles and built-in rear casters that allow you to move your BrewSculpture with ease.
Oversized 304 stainless BrewBuilt Kettles with welded fittings, notched lids, internally etched volume markers, aluminum clad bottoms, and silicone handles. Built to last.
Our "Large" option will come with 22 gallon kettles
The fluid path is easy to use and clean. We've included the time tested, top of the line March pumps along with heat resistant food-grade silicone tubing and our own specially designed stainless quick disconnects.
Burners are fast, efficient, quiet and have great flame control.
Mashtun includes the Ultimate Sparge Arm with innovative design to eliminate hot-side aeration. The center draw outlet with quick disconnect is locked in during mashing but easily disconnects for cleaning. The mash screen has a very low volume of base water under the screen to aid with efficiency and mash consistency. The perforated stainless mash screen is reinforced for use with pump recirculation and includes a silicone gasket to make a perfect seal with the kettle wall. Internally etched volume markers make mash water additions super easy.
Boil Kettle includes innovative Whirlpool maker for leaving hops and trub behind. Volume markers are etched on the inside so you know exactly how much wort you have at all times. The lid notch is super handy for hanging hop bags, using an immersion chiller, etc., but when not is use an included silicone plug seals the notch. The bottom of the boil kettle is tri-clad with a 4mm aluminum core sandwiched between two layers of 304 stainless. The aluminum core eliminates scorching and the cleaning that comes with a scorched kettle.
Includes all of the tubing you'll need with:
4 x 40 in. Hoses with male and female quick disconnects
32 in. Hose with 2 female quick disconnects
32 in. Hose with 1 female quick disconnect and 1 open end
Dimensions / Specifications:
Stainless Frame measures 73" L x 19.5" W x 29" H
Requires 110/120V power source
Please Note: Natural Gas Sculptures require installation by a professional plumber. These units terminate in a ¾” Male Flare connection.
We Supply front and back handles on the XXL Kettles to allow removing the kettles from the stand more easily.
Wine Cap Puncher - This is an ideal puncher for smaller volume winemaking. Perfect for 20 gallon fermenters.
Our design features a sealed connection where juice cannot travel back up into the handle. We have seen similar models but always passed on selling them because the design had an opening where the 4 metal wires went back into the hollow handle. When juice inevitably did get back up into that space, the punch was done, you could never clean it. Height is 24". Base is 5 3/16" diameter
Perfect for summertime parties, the low-profile design makes this pump easy to use, store, and transport. At the beach, the park, or in the backyard, the Shorty will provide you with great beer keg after keg. For D style kegs.
Also known as a keg coupler, coupling, or adapter.
Achieve a perfect whirlpool everytime with Blichmann's weldless whirlpool kits. They come with 2 different options for the valves. You can get the Blichmann linear flow valve or a 1.5 in TC butterfly valve. Regardless of which valve you choose you can hook up a pump and get a strong whirlpool action to help you settle out some of that unwanted trub!
Note: These kits require a hole in your kettle of about 13/16 in. You may drill this hole yourself using the instructions in the documents tab or use these kits if your kettle already has a hole.
Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
This 15" whirlpool works perfectly with the 6.5 Gallon Foundry™, brew kettles, and any other brewing system. The rotating rubber piece allows it to secure to the side of any vessel, no matter the thickness. The Swirly™ uses a 1/2" Straight Pipe Thread for hose connections and includes a hose barb for connecting your water supply. Patent pending.
The 15" Swirly fits any vessel that is 11"-21" in container height.
This simple pump kit is a great way to clean your draft lines when you don't want to waste CO2 or mix up a full batch of line cleaner. The PCO tee piece can be attached to a PET beer bottle or repurposed soda bottle, then pressurized with the hand pump to push cleaner through your ball lock disconnect and draft lines.
You can also use the pump kit to turn just about any PET bottle into a mini party keg; one that's easy to take with you while leaving your gas equipment at home. But since you'll be using air to push the beer out, we recommend consuming the contents of the bottle well within 24 hours.
Kit Contains:
Yellow carbonation cap
Red Tee Piece - 28mm PCO 1881 Threads (Female x Male x Male)
Mini yellow hand pump
11.75" length of EVABarrier tubing (5mm ID x 8mm OD)
PET Bottle not included
KegLand Part Number: KL20220
The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects. These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi. All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path. O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel.
This is a Female Socket, which can connect to any H501 Series Male Plug. It has a 3/8" Hose Barb on the other end for attaching any 3/8" ID tubing. This QD is equipped with a shutoff valve. When not connected to another QD, this will not allow any flow.
While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup does offer a few advantages. These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems. The pricing of these products is more economical, yet the plastic is still medical grade. All in all, these are a premium lineup of quick disconnects with great features and lots of options.
Features:
LinkTech brand 60PS Series
Equipped with Shutoff Valve
Connections:
Female Socket Quick Disconnect
3/8" Barb
Medical Grade Materials:
Body: High-Strength Polypropylene
Spring: 316 Stainless Steel
O-Ring: EPDM
Operating Pressure: Vacuum to 60 PSI
Temperature Tolerance: -40 to 280°F (-40 to 138°C)
3/8" Flow Path
Interchangeable with CPC - Colder HFC35 Series
Show everyone you mean business with these 50 caliber BMG beer tap handles. Made from real, once fired, 50 caliber bullets that are hand polished and coated with an anti-tarnish lacquer. The 50 Caliber BMG is used in most of the military's heavy machine guns. A great addition to any man cave!
Fits all US Faucet levers, 3/8” – 16 UNC (Unified Coarse Thread).
Does not come with faucet!
Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve.
We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both models feature a Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model.
Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information.
Does not include air compressor or regulator
Specifications:
Maximum Air Inlet Pressure .............. 120 p.s.i.g. (8.3 bar)
Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar)
Maximum Outlet Pressure ................ 120 p.s.i.g. (8.3 bar)
Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.)
Maximum Flow Rate (flooded inlet) .... 47 g.p.m. (177.9 L.p.m.)
Displacement / Cycle @100 p.s.i. ......... 0.17 gal (0.64 lit)
Maximum Particle Size .................... 1/8" dia. (3.2 mm)
Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C)
Noise Level @ 70 p.s.i., 60 c.p.m. ...... 79.7 db(A)
Dimensions .................................... 14 7/32" W x 14 27/32" H x 11 1/32" D
Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve.
We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both models feature a Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model.
Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information.
Does not include air compressor or regulator
Specifications:
Maximum Air Inlet Pressure .............. 100 p.s.i.g. (6.9 bar)
Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar)
Maximum Outlet Pressure ................ 100 p.s.i.g. (6.9 bar)
Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.)
Maximum Flow Rate (flooded inlet) .... 14.4 g.p.m. (54.5 l.p.m.)
Displacement / Cycle @100 p.s.i. ......... 0.039 gallons (0.15 lit.)
Maximum Particle Size .................... 3/32" dia. (2.4 mm)
Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C)
Noise Level @ 70 p.s.i., 60 c.p.m. ...... 75.0 db(A)
Dimensions .................................... 10" W x 10 7/8" H x 6 23/32" D
Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve.
We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both models feature a Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model.
Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information.
Does not include air compressor or regulator
Specifications:
Maximum Air Inlet Pressure .............. 100 p.s.i.g. (6.9 bar)
Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar)
Maximum Outlet Pressure ................ 100 p.s.i.g. (6.9 bar)
Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.)
Maximum Flow Rate (flooded inlet) .... 10.6 g.p.m. (40.1 L.p.m.)
Displacement / Cycle @100 p.s.i. ......... 0.022 gal (0.083 lit)
Maximum Particle Size .................... 1/16" dia. (1.6 mm)
Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C)
Noise Level @ 70 p.s.i., 60 c.p.m. ...... 72.7 db(A)
Dimensions .................................... 7 31/32" W x 9 5/16" H x 5 23/32" D
PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.
Many factors can be the difference between good and great beer, and temperature control slots in near the top of the list. A stable temperature throughout fermentation keeps the yeast happy, and helps prevent the off flavors produced when they become stressed.
In order to cool with the Grainfather Conical Fermenter, you'll also need the Conical Fermenter Temperature Controller (FE233). If your target temperature is below the temperature of the wort in your fermenter, the Cooling Pump Kit will pump ice cold water through the double walled insulated interior, cooling your wort in the process.
Connect the included couplers and insulated hoses to the Conical Fermenter, lower the submersible pump into a cooler with cold water (add ice as needed) and pump it through the insulated cooling sleeve of the Conical Fermenter body.
Conical Fermenter Cooling Pump (submersible)
T-section power connector
2 x brass couplers (with self-sealing hose connections)
Rated 12 VDC – 4.8 Watts
Used to stir up lees in a barrel or to ensure a complete mix of so2 or any other addtives, our stainless steel lees stirrer with 24" solid stainless shaft and fold out stainless paddle will get the job done quickly and efficiently. Connect to drill and use on lowest speed. Included black plastic bung seals barrel while stainless shaft spins freely.
Stainless steel pump with food-grade plastic impeller with for moving wine or beer
1.5" tri-clamp connections
13 gallons per minute flow rate
Made in Italy by Marchisio
This pump features a stainless body, housing, and bracket. It utilizes an impeller made from food-grade plastic. The impeller does not push air by itself so to prime it you unthread the priming nut on top of the filter housing and fill with water or wine. Comes with 1.5" T.C. inlet and outlet. Has a .8 hp motor and moves 13 gallons per minute with no head. Will pump up to a height of 70'. 110v. Overall dimensions are 14.5" L x 7"W x 7"H. Weighs 15.4 lbs. Optional by-pass can be installed to restrict flow up to 25%. This pump can handle some small solid particulate, such as grain particles, and is food grade up to 113° F.
Please note the instruction manual references 230V for the voltage, but these pumps are custom configured by the manufacturer in 110V.
Homebrewers enter the hobby in various ways, one-gallon kits , 5 gallon extract and even some adventurous types jump straight into 5 gallon all-grain setups....
,
by Ben Jankowski (Brewing Techniques)
American Porters
by Ben Jankowski (Brewing Techniques) American Porters- Marching to Revolutionary Drummers From their earliest days in colonial experience, American porters have evolved separately from their...
