High performance primary regulator designed to handle the workload of dispensing from multiple taps without freezing up!
Dual high-pressure and low-pressure gauges to easily reference CO2 cylinder pressure and output pressure
Pressure settings are easily adjusted by hand using the large plastic adjustment knob
CGA320 inlet features a built-in gasket where the unit attaches to the CO2 tank—eliminating the need of replacing fiber washers with each tank swap
Made in the USA. Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment
One-way shutoff valve outlet protects your regulator from backflow and can be turned on/off to stop gas flow without needing to close your tank
When it comes to CO2 regulators, we’ve tried them all. This quality unit by Taprite is our favorite on the market. It’s no wonder this regulator is trusted by so many breweries and beer bars—it represents the best quality at a great price. Available in a standard, single-body model, as well as a dual-body model which allows you to send different pressures to two separate kegs from the same CO2 tank!
The things you’ll love about this regulator are:
The large front knob makes pressure adjustment tool-free, easy & fast.
The built-in gasket where the regulator connects to the CO2 tank eliminates the constant replacement of fiber washers every time you change out your tank.
The barbed outlet features a one-way on/off valve which prevents backflow and protects the regulator’s internals.
The gauges are easy to read. The low pressure gauge reads from 0 to 60 psi. The optional available gauge cage is the best on the market.
This is the T742HP model, where the HP stands for high performance; it won't freeze up when multiple taps are running at once.
Best of all is the consistent pressure regulation. With many regulators the pressure can 'creep' up over time. This unit holds the pressure rock steady. No drifting.
Built by Taprite, an American company.
Protect your regulator from damage in the event your tank gets knocked over. A Gauge Cage is cheap insurance that can help save you a costly regulator replacement.
Mounting bolt and washer included.
CO2 and Nitrogen tanks, especially the 5lb size most brewers use, are notoriously wobbly and easy to knock over once the regulator is mounted on them. This handy Gauge Cage helps protect the gauges themselves, as well as the fragile points where they thread into the regulator body, from damage in case of a fall.
Specifically sized to fit our D1060 and D1070 Taprite brand ragulators, these cages may not fit some budget regulators manufactured overseas.
D-Type keg coupler for standard American sanke kegs Stainless keg probe Pull-to-engage lever handle Includes 3/8" OD barb for gas inlet Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment Made in the USA The D-Style sanke keg beer tap is the most commonly-used keg coupler in the U.S. If you’re going to serve commercial draft beer that was made in the US and is dispensed from your standard American sankey keg, this is the keg coupler you’ll need. Made in America by Taprite, this keg coupler features a lock-down mechanism that produces a satisfying “click” when engaged. Its heavy-duty construction is designed to withstand frequent commercial use, so you know it’ll last for years at home. It features a built-in pressure relief valve for safety. To dispense beer, gas is pushed into the keg through the tap’s side port and the beer exits through the top port. The tail piece, hex nut or gasket for dispensing beer out of the top port must be purchased separately. We offer a pre-made kit with a 1/4” tailpiece (D1720B), as well as a range of other tailpiece sizes to match whatever diameter beer line you’re using.
High performance primary regulator designed to handle the workload of dispensing from multiple taps without freezing up!
Dual body regulator for setting independent pressure settings—ideal for serving two different beer styles with different optimum carbonation levels
High-pressure and double low-pressure gauges to easily reference CO2 cylinder pressure and the two output pressures
Pressure settings are easily adjusted by hand using the large plastic adjustment knob
CGA320 inlet features a built-in gasket where the unit attaches to the CO2 tank—eliminating the need of replacing fiber washers with each tank swap
Made in the USA. Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment
One-way shutoff valve outlets protect your regulator from backflow and can be turned on/off to stop gas flow without needing to close your tank
When it comes to CO2 regulators, we’ve tried them all. This quality unit by Taprite is our favorite on the market. It’s no wonder this regulator is trusted by so many breweries and beer bars—it represents the best quality at a great price. This dual-body model allows you to send different pressures to two separate kegs from the same CO2 tank!
The things you’ll love about this regulator are:
The large front knobs make pressure adjustment tool-free, easy & fast.
A built-in gasket where the regulator connects to the CO2 tank eliminates the constant replacement of fiber washers every time you change out your tank.
The barbed outlets feature one-way on/off valves which prevent backflow and protect the regulator’s internals.
The gauges are easy to read. The low pressure gauges read from 0 to 60 psi. The optional available gauge cage is the best on the market.
This is the T752HP model, where the HP stands for high performance; it won't freeze up when multiple taps are running at once.
Best of all is the consistent pressure regulation. With many regulators the pressure can 'creep' up over time. This unit holds the pressure rock steady. No drifting.
Built by Taprite, an American company.
Get that eye-catching cascading effect by serving your Stouts & Porters with a nitrogen tank filled with beer gas mix!
Serve still beverages on draft with pure nitrogen or argon—serving still bevs with CO2 will lead to carbonation over time
Dual high-pressure and low-pressure gauges to easily reference cylinder pressure and output pressure
CGA580 inlet compatible with standard US nitrogen and argon tanks
Made in the USA. Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment
One-way shutoff valve outlet protects your regulator from backflow and can be turned on/off to stop gas flow without needing to close your tank
This Taprite Nitrogen Regulator will allow you to add Nitro-Draft capability to your home dispense system!
Use this dual gauge nitrogen regulator to connect a tank of Beer Gas mix (70% Nitorgen/30% CO2) to your keg for an authentic nitro-pour! Traditionally used for stouts and porters, a nitro pour is becoming popular with more and more beer styles, lending its signature creamy mouthfeel and head to the beer. An amazing upgrade to any brewer's draft system.
Made in the USA by Taprite. 5/16" barb.
Perfect CO2 regulator for wall mounting in a cold box or outside of your keezer etc!
Wall brackets for easy mounting
5/16” barbed outlet fittings with individual shutoff valve
How does one keg of beer, one keg of sparkling wine, and one keg of root beer, sound for your next party? Awesome? Yeah, we think so too. But, each of these different beverages requires a different serving pressure, and nobody wants to go buy an extra CO2 tank and regulator for each different beverage. Enter the Secondary Regulator!
Standard multi-body CO2 regulators are heavy and can make a CO2 tank prone to tipping over, especially as it gets empty. Combine that with the fact that there aren’t Gauge Cages for multi-body regulators and you’ve got a recipe for disaster.
Secondary regulators do not attach directly to CO2 tanks, instead mounting to the side or wall of a fridge, kegerator or jockey box. They allow you run multiple keg pressures from one tank of gas. CO2 line from your existing system attaches to secondary input, and the output pressure to the keg is easily adjustable.
Features wall brackets for easy mounting. Multiple units can be purchased and ganged together, making it a snap to expand your system at any time. 5/16” barbed outlet fittings with individual shutoff valves.
Perfect CO2 regulator for wall mounting in a cold box or outside of your keezer etc!
Wall brackets for easy mounting
5/16” barbed outlet fittings with individual shutoff valve
How do one keg of beer, one keg of sparkling wine, and one keg of root beer, sound for your next party? Awesome? Yeah, we think so too. But, each of these different beverages requires a different serving pressure, and nobody wants to go buy an extra CO2 tank and regulator for each different beverage. Enter the Secondary Regulator!
Standard multi-body CO2 regulators are heavy and can make a CO2 tank prone to tipping over, especially as it gets empty. Combine that with the fact that there aren’t Gauge Cages for multi-body regulators and you’ve got a recipe for disaster.
Secondary regulators do not attach directly to CO2 tanks, instead mounting to the side or wall of a fridge, kegerator or jockey box. They allow you run multiple keg pressures from one tank of gas. CO2 line from your existing system attaches to secondary input, and the output pressure to the keg is easily adjustable.
Features wall brackets for easy mounting. Multiple units can be purchased and ganged together, making it a snap to expand your system at any time. 5/16” barbed outlet fittings with individual shutoff valves.
D-Type keg coupler for standard American sanke kegs
All stainless steel with stainless coupler body and stainless keg probe
Pull-to-engage lever handle
Includes 3/8" OD barb for gas inlet
Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment
Made in the USA
The D-Style beer tap is the most commonly-used keg coupler in the U.S. If you’re going to serve commercial draft beer that was made in the US and is dispensed from your standard American sankey keg, this is the style tap you’ll need.
American-made by Taprite, this coupler is constructed from stainless steel and features a lock-down mechanism that produces a satisfying “click” when engaged. Its heavy-duty construction is designed to withstand frequent commercial use, so you know it’ll last for years at home. The 304 stainless body and probe will provide a more reliable life span compared to its nickle-plated counterpart. Features a built-in pressure relief valve for safety.
To dispense beer, gas is pushed into the keg through the tap’s side port and the beer exits through the top port.
The tail piece, hex nut or gasket for dispensing beer out of the top port must be purchased separately. We offer a pre-made kit with a 1/4” tailpiece (D1720B), as well as a range of other tailpiece sizes to match whatever diameter beer line you’re using.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
The Taprite beer carbonation tester is designed to be used in the field to verify carbonation levels during equipment installation and keg change-outs. It is a cost effective and accurate tool for troubleshooting and quality control. The carbonation tester's sturdy, 11-ounce acrylic canister includes a handy label noting the appropriate CO2 volume based on your temperature and pressure reading. The tester's cap and fittings are made of lightweight metal with easy to grip knurling. The pressure gauge includes a protective rubber boot (600gps-01) for additional durability. Taprite's beer carbonation tester is easy to handle, easy to use, and easy to clean. Each tester comes with a cushioned carrying case, as well as inlet and outlet hoses with quick disconnects.
Taprite Part Number: 2701-bct
If your Taprite Regulator is drifting or losing pressure, why not try repairing it rather than replacing? Over time the internal diaphragm can wear out resulting in drifting pressure or a slow leak through the regulator body Refurb your unit with this Regulator Rebuild Kit and return your Taprite regulator to it’s lost glory.
Works with Taprite CO2 or N2 regulators. Not intended for other regulators.
Taprite Part Number: 7740-19-SP
Great Replacement for a broken gauge.
Replacing a broken gauge on your pressure regulator is a snap with this Left Hand Thread 3000 psi Replacement Pressure Gauge for CO2 or Nitrogen regulator. Installation is simple, and it prevents you from needing to buy a whole new regulator.
Used to determine level of remaining gas in the tank.
1/4” MPT Left-hand thread.
Perfect CO2 regulator for wall mounting in a cold box or outside of your keezer etc!
Wall brackets for easy mounting
5/16” barbed outlet fittings with individual shutoff valve
How do one keg of beer, one keg of sparkling wine, and one keg of root beer, sound for your next party? Awesome? Yeah, we think so too. But, each of these different beverages requires a different serving pressure, and nobody wants to go buy an extra CO2 tank and regulator for each different beverage. Enter the Secondary Regulator!
Standard multi-body CO2 regulators are heavy and can make a CO2 tank prone to tipping over, especially as it gets empty. Combine that with the fact that there aren’t Gauge Cages for multi-body regulators and you’ve got a recipe for disaster.
Secondary regulators do not attach directly to CO2 tanks, instead mounting to the side or wall of a fridge, kegerator or jockey box. They allow you run multiple keg pressures from one tank of gas. CO2 line from your existing system attaches to secondary input, and the output pressure to the keg is easily adjustable.
Features wall brackets for easy mounting. Multiple units can be purchased and ganged together, making it a snap to expand your system at any time. 5/16” barbed outlet fittings with individual shutoff valves.
Perfect CO2 regulator for wall mounting in a cold box or outside of your keezer etc!
Wall brackets for easy mounting
5/16” barbed outlet fittings with individual shutoff valve
How do one keg of beer, one keg of sparkling wine, and one keg of root beer, sound for your next party? Awesome? Yeah, we think so too. But, each of these different beverages requires a different serving pressure, and nobody wants to go buy an extra CO2 tank and regulator for each different beverage. Enter the Secondary Regulator!
Standard multi-body CO2 regulators are heavy and can make a CO2 tank prone to tipping over, especially as it gets empty. Combine that with the fact that there aren’t Gauge Cages for multi-body regulators and you’ve got a recipe for disaster.
Secondary regulators do not attach directly to CO2 tanks, instead mounting to the side or wall of a fridge, kegerator or jockey box. They allow you run multiple keg pressures from one tank of gas. CO2 line from your existing system attaches to secondary input, and the output pressure to the keg is easily adjustable.
Features wall brackets for easy mounting. Multiple units can be purchased and ganged together, making it a snap to expand your system at any time. 5/16” barbed outlet fittings with individual shutoff valves.
Keep your draft faucet in perfect working order!
If the lever gets stuck or is unused for a long time, it can break
Replace it to keep using your favorite tap handle and keep the beer flowing!
With this brass lever you can renew a worn-out part on your well-used draft faucet. This is the actual lever that opens and closes the faucet, and where the tap handle is threaded on. These levers can break if a faucet is left alone for too long and the lever gets stuck.
An on/off ball valve and a check valve all-in-one!
Give your regulator an extra layer of protection with this dual purpose Shut-Off Check/Ball Valve. This valve gives you the flexibility to quickly turn off CO2 and at the same time keep beer from ever traveling back up the gas line and into the regulator. Standard equipment on our regulator.
Male 1/4" NPT x 5/16" barb.
Keep your draft faucet in perfect working order.
Does not react with beer
Is stronger than brass
With this stainless steel lever you can renew & upgrade a worn-out part on your well-used draft faucet. This is the lever that actually opens and closes the faucet, and that the tap handle attaches too. Stainless levers are used to replace broken brass levers because of their strength and ability to not react with beer.
Great Replacement for a broken gauge.
Replacing a broken gauge on your pressure regulator is a snap with this Replacement Low Pressure Gauge for CO2 or Nitrogen regulator. Installation is simple, and it prevents you from needing to buy a whole new regulator.
1/4” MPT Right-hand thread.
Keep your draft faucet in perfect working order.
Replace the washer that seals the sliding shaft of your faucet to prevent leaks
With this washer you can renew a worn-out part on your well-used draft faucet. This washer seals the sliding shaft, which often becomes brittle with age causing the faucet to drip.
Silicone regulator stem o-ring. Commonly used on Taprite regulators which have an o-ring located where the regulator stem mates with the CO2 cylinder. Comes in a convenient zip lock bag. NOTE: These are not intended for use with the KOMOS CO2 Regulator. For the correct KOMOS Regulator replacement gasket, please see D1089.
Keep your draft faucet in perfect working order!
Replace your old or broken friction bonnet to keep your fauce lever moving properly
This friction Bonnet is the piece that sits between the Faucet and the Faucet Knob Lever Collar. Tightening it compresses a washer and creates resistance when opening and closing the faucet.
If you have a SodaStream CO2 cylinder then you can use this adapter to attach a CO2 regulator to it and avoid having to use those large 5 lb. CO2 tanks.
This adapter also has a side adjustment pin valve into the SodaStream bottle that enables the pin valve to be engaged once the cylinder, adaptor, and regulator have all been screwed together. This ensures that the gas supply from the bottle to the regulator can be engaged and disengaged while everything is screwed in place.
The adapter is incompatible with our Taprite brand regulators.
KOMOS Key Features on the Best Value Outdoor Kegerator Available!
Outdoor ready kegerator can be built-in undercounter in your outdoor bar because it vents through the bottom front.
Stainless! Stanless steel exterior and interior and one of the only kegerators available with an air cooled stainless tower and stainless forward sealing faucets
Choose from the classic stainless model faucet or the upgraded stainless flow control model
Faucets mount to a high-quality stainless steel tower, rather than a cheap chrome plated tower
Duotight push-to-connect fittings are newest and easiest way to connect draft lines. Also makes future line replacment super easy!
Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted
Commercial quality compressor keeps beer cold in the warmest situations.
The KOMOS Outdoor Kegerator with stainless NukaTap faucets offers the best value in the USA for an all-stainless steel outdoor rated kegerator. And we mean all stainless! Other models advertised as stainless kegerators often only have stainless exteriors and a painted interior. Similar to only working out your pecs and never your core—looks great, but doesn't really make you that strong. We've sold kegerators for 20 years, and if you're buying an outdoor stainless kegerator, you will definitely want a stainless interior. The interior is where the moisture happens, and where kegerators are most prone to rust over time. Kegerators with stainless interiors are considerably more expensive, and other units with a stainless interior and exterior sport a minimum $2,000 price tag. With an all-stainless interior and exterior, the KOMOS unit is built to operate at a level other kegerators simply can't reach, and offered at price that can't be beat.
In addition to the all-stainless design, the KOMOS Kegerator offers a list of unique features that put it a cut above the rest. Front venting means this unit is perfect as build-in option under your counter. Highly-efficient refrigeration components allow the kegerator to operate quietly while serving ice cold beer in the warmest environments. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Heavy duty casters come standard for maximum mobility, and front facing ventilation makes it ideal for using as a built-in kegerator in an outdoor kitchen. Quick and easy assembly thanks to push-to-connect Duotight fittings and EVABarrier draft tubing. Stainless steel tower with cooling fan. Extra wide temperature control range from 28–86°F. And the included Taprite Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted.
Wide Temperature Range is Perfect for Homebrewers
The KOMOS kegerator is tailored to a homebrewer's needs. The extended range digital controller that can be set the temperature anywhere between 28 - 76°F. This allows homebrewers to use it for fermentation and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller is located inside the unit, keeping the outside looking super clean.
Stainless NukaTap Faucets and Towers
All KOMOS kegerators come with NukaTap stainless steel forward-sealing faucets and a stainless steel draft tower. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Most other kegerators on the market will only include the cheapest, standard chrome-plated beer faucets that you'd find at any dive bar. KOMOS kegerators include not only a faucet that features superior pour technology, but made from stainless steel which won't corrode over years of use.
Choose from the classic forward-sealing faucet model or the upgraded flow control model that allows you to dial in the flow rate of the beverage you're dispensing. The flow control faucet is a great option for users that often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Instantly make adjustments as you pour to dial in the flow rate. This is also a super convenient feature for when you want to grab a quick growler on your way out. By dialing back the flow rate, you can gently fill your growler so CO2 stays in solution and your beer doesn't pour flat when it comes time to share. Click here to learn more about the Classic and Flow Control faucet models.
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
KOMOS Regulator
The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line.
Best Choice for Outdoors
With its stainless steel construction and powerful compressor this Komos Kegerator is the best choice for outdoor kitchens, bbq islands, or poolside placements. The forward-facing vents at the bottom of the kegerator allow this unit to be installed under counter without having to leave 2-3 inches on each side of the kegerators as is required with some other models. The model also features more power than the standard residential version and can stand up to ambient temperatures up to 104°F. You will want to place your kegerator in a position to be protected from rain.
If you plan to install the kegerator under a countertop, the top cover will need to be removed and you will need to install the Build-In Door Hinge, as the top door hinge is removed with the cover.
Easy to Clean
The stainless steel countertop drip tray looks great and couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Best Value & Backed by MoreBeer!
We've looked around and you are getting the very best value on an all stainless steel kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. In the rare and unfortunate scencario your unit arrives damaged just call us up and we will work with you to take care of it.
Feature Summary:
Stainless Steel Air Cooled Tower
Stainless Steel NukaTap Forward-Sealing Faucets
Choose faucet model and number of taps above
Duotight Fittings make connecting draft lines a breeze
Digital Thermostat with wide 28 - 76° F temp range.
Robust KOMOS Dual Gauge Regulator included
CO2 Tank strap mounts above a triangular stage inside the kegerator
Efficient and powerful compressor uses R600 refrigerant
Beautiful stainless interior and exterior
Stainless Steel Countertop Style Drip Tray
Stainless Steel Floor for additional keg support
Heavy duty rolling casters come standard
Front-facing vent perfect for installing unit into cabinets or under bar
Lock & key to keep your precious beverages protected
Includes EVABarrier beer and gas tubing
Beverage line measures 4mm ID x 8mm OD
1 x 1.7m length of line per tap
Gas line measures 5mm ID x 8mm OD
1 x line of varying length depending on number of taps (2, 2.5, or 3m)
Duotight adapters for draft shank and regulator connections
Duotight tee fittings for splitting gas lines (2 and 3 tap only)
You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny
For ball lock and pin lock disconnects we recommend DUO106
For commercial sanke keg couplers we recommend DUO104
UL & CSA Certified
Detailed instructions on assembly and use
Specifications:
24" Wide
25" Deep
35" Tall (fridge only)
39.25" with Caster Wheels
47.75" with Tower
52" with Casters and Tower
115V - 60 hz
1.6 Amp draw
Works well in ambient temperatures up to 100°F
Internal Dimensions:
21" Wide
18.25" Max Depth
28.5" Tall
27" clearance under controller
What Fits:
2.6 Gal. BrewKeg - 2
5 Gal. Torpedo Keg - 3
5 Gal. Slimline Torpedo Keg - 3
5 Gal. Megamouth Torpedo Keg - 2
5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 3
5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1
7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 2
15.5 Gal. Half Barrel Keg (Full Size Keg) - 1
See below for the Kegerator Instruction Manual.
Provides rapid and permanent tartrate stabilization against potassium bitartrate (KHT) crystal formation, eliminating the need for chilling or extended settling times
Preserves wine quality with a formulation that has no sensory impact on aroma, color, flavor, or mouthfeel, and is compatible with standard winemaking practices like filtration
Offers a sustainable and convenient solution that is vegan, allergen-free, requires no refrigeration, and is compliant with international regulations (OIV approved)
Ensures long-lasting stability due to the hydrolysis-resistant nature of potassium polyaspartate (KPA), maintaining its effectiveness throughout wine aging and under varying temperatures
Enartis Zenith Uno is a cutting-edge solution for tartaric stabilization in white, rosé, and sparkling wines. Formulated with potassium polyaspartate (KPA), this next-generation additive provides fast, reliable, and permanent stabilization against potassium bitartrate (KHT) crystal formation—without the need for refrigeration or extended settling times.
How It Works:
Zenith Uno’s active ingredient, potassium polyaspartate, is a polypeptide derived from aspartic acid. This polymer inhibits crystal nucleation and growth by binding to nascent KHT microcrystals, effectively preventing them from aggregating and forming visible tartrate deposits. Unlike traditional methods such as cold stabilization or metatartaric acid, KPA is resistant to hydrolysis, meaning its stabilizing effect is long-lasting and unaffected by wine aging or elevated storage temperatures.
Scientific Highlights:
KPA molecules act as a crystal growth inhibitor by interfering with the surface structure of KHT nuclei.
Demonstrated stability in wine over time, even under variable temperature conditions.
No sensory impact: Multiple trials confirm that KPA has no effect on aroma, color, flavor, or mouthfeel.
Compatible with protein and color stability tools such as bentonite and PVPP.
Does not interfere with crossflow filtration or other standard winemaking operations.
Key Benefits:
Permanent tartrate stabilization
No need for chilling, aging, or post-treatment filtration
Preserves wine’s freshness and sensory profile
Vegan and allergen-free
Approved by OIV (OENO 543-2016) and compliant with global regulations
With Enartis Zenith Uno, winemakers can achieve brilliant clarity, stability, and peace of mind—all in a single, easy step. Efficiency has never tasted so good.
Do Protein Stabilization First
Use KWK Klear bentonite or, for very high-quality wines, Claril ZW to achieve protein stability before using Zenith Uno for tartrate stability.
