puRO RO Filter (75 GPD)
FIL85
An american assembled RO system with a five stage process and high quality components. Maximum output of 75 Gallons Per Day. Note: actual output is based on several factors, including, water pressure, back pressure (from your holding tank), mineral content in your water and the status of your filters. Shipped Direct.
Stage 1 - 25 micron sediment filter to remove large particles: Removes dirt, sediment, sand and other physical particles.
Stage 2 - 5 micron sediment filter to remove particles: Removes dirt, sediment, sand and other physical particles.
Stage 3 - 10 Micron Carbon Block: Further reduces chlorine, odors, and other chemicals that might be in your water supply.
Stage 4 - Reverse Osmosis Membrane: 50 gallon per day membrane reduces 93%-98% of dissolved mineral salts and other contaminates in the water supply.
Stage 5 - An Inline Granulated Active Carbon (GAC) Filter: A polishing process that removes tastes and odors from the water.
PuRO RO System Includes:
Made in USA quality
Desal Membranes
Ametek style filter housings
5 year warranty on 3.2 gallon storage tank
Lifetime warranty on faucet
Omnipure & KX Filters
John Guest Fittings
Supply feed
Drain Connector
Auto Shut Off
Tank Ball Valve
3/8" From tank to faucet
5 Year limited warranty
Feed water requirements:
Max. Total Dissolved Solids: no more than 2000 ppm
Water Temp. Range: 40-85oF
Water Pressure Range: 40-125psi
Allowable pH Range: 4-11
Max. Manganese: no more than 0.05ppm
Max. Iron: no more than 0.1ppm
Hydrogen Sulfide: must not be present
Bacteria: water source must be potable
NOTE: If you have well water, we suggest making the first filter be a 5 micron sediment filter, the second a Carbon Block filter and then the third filter, our FIL57, KDF filter.
|
