Ranco Digital Temperature Controller (Not Wired)
FE610A

This is just the same FE610 controller without any wiring. For the "Do It Your Self" person or for hard wiring into your application. It comes with a manual and wiring diagram, but you must have electrical knowledge. If you are unsure you are best purchasing the pre-wired FE610








This controller has two sets of contacts the Normally Open contact is rated at:

                                        115 Volts                             208/240 Volts
Full-Load Amps                          16 Amps                                  8 Amps
Locked Rotor Amps                       96 Amps                                  48 Amps
Ressistive Amps                         15 Amps                                  8 Amps
Horsepower                              1 hp                                     1 hp
 


The Normally Closed contact is rated at:



                                       115 Volts                             208/240 Volts
Full-Load Amps                           5.8 Amps                                  2.9 Amps
Locked Rotor Amps                       34.8 Amps                                 17.4 Amps
Ressistive Amps                          5.8 Amps                                  2.9 Amps
Hoursepower                              1/4 hp                                    1/4 hp

« Previous Page