Ranco Digital Temperature Controller (Not Wired)
FE610A
This is just the same FE610 controller without any wiring. For the "Do It Your Self" person or for hard wiring into your application. It comes with a manual and wiring diagram, but you must have electrical knowledge. If you are unsure you are best purchasing the pre-wired FE610
This controller has two sets of contacts the Normally Open contact is rated at:
115 Volts 208/240 Volts
Full-Load Amps 16 Amps 8 Amps
Locked Rotor Amps 96 Amps 48 Amps
Ressistive Amps 15 Amps 8 Amps
Horsepower 1 hp 1 hp
The Normally Closed contact is rated at:
115 Volts 208/240 Volts
Full-Load Amps 5.8 Amps 2.9 Amps
Locked Rotor Amps 34.8 Amps 17.4 Amps
Ressistive Amps 5.8 Amps 2.9 Amps
Hoursepower 1/4 hp 1/4 hp
|
