Logo
 
MoreBeer!
Fermentap Dial Thermometer - 3 in. Face x 6 in. Probe
MT514

Fermentap Dial Thermometer - 3 in. Face x 6 in. Probe

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

A great thermometer at a great price! These thermometers have a 3" Face, a 6" Probe, and a 1/2" MPT on the back. The 6" Probe works great in a Mash Tun, however may be too long for a boil kettle if you use an immersion chiller. Please see our MT512 for the same thermometer with a 2.5" probe.


Standard Features:
-All Stainless Construction
-Fast Response to Temperature Change
-Hermetically Sealed (Moisture Proof)
-Within 1% Full Scale Accuracy
-Easily Calibrated With a Flat Head Screwdriver
-316 Stainless Steel Stem Material

Temperature range is 20-240F and 0-110C. Calibration screw is 1/16th" hex nut.

Item # MT514
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 0.65 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
To use the optional thermometer (MT500), do I need to buy a thermowell (e.g. FE619)?
Carter Page on Jul 31, 2019
Fermentap Bi-Metal Dial Thermometer (3 in Face x 6 in Probe)
Fermentap Bi-Metal Dial Thermometer (3 in Face x 6 in Probe)
Speidel Variable Volume Tank | Laser-Welded | Stainless Steel  | 110L
Speidel Variable Volume Tank | Laser-Welded | Stainless Steel | 110L
NW 10 DIN 11851 Threaded Thermowell for Speidel Tanks - 125 mm Length
NW 10 DIN 11851 Threaded Thermowell for Speidel Tanks - 125 mm Length
BEST ANSWER: The thermowell mentioned above does not fit this tank FYI. I believe the FE622 is the correct size thermowell.
Reviews

2.8 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
1
2
Rated 1 out of 5
incomplete
Doesn't come with nut or washer or any method of attaching
June 19, 2018
Response from MoreFlavor
Hello Jason - MT514 is designed for equipment with existing 1/2" FPT Bulkheads. We offer WL311 and WL313 Weldless Thermometers with all necessary fittings to install on a kettle. Blichmann also offers BL700 in similar fashion. A step drill is required.
June 27, 2018
Zach R Staff
Rated 1 out of 5
Really Expected More
I bought the 6" probed thermometer and installed it on my kettle, which was a task in itself. First off, the hole which must be bored in the metal kettle is rather large making for a bit more work than should really be necessary. Secondly, the required nuts and washers to attach it are not included and raise the cost (I guess that's why the Blickmann is $10 more expensive). But the most disappointing aspect happened when the probe got bent after being installed. Thereafter the thermometer will not register the correct temperature no matter how much the calibration screw is adjusted. It will neither come within 5 degrees of freezing nor boiling (I tested it at sea level using distilled water). In other words, it is now worthless! I had to buy a different one.
January 12, 2015
Rated 5 out of 5
Great Long Probe Thermometer
This is my favorite thermometer for my cooler mash tun - been using it for two years now, and still accurate to within 1 degree. Never had an issue with liquid splashing on it, and never had an issue with the needle sticking.
May 13, 2014
Rated 2 out of 5
Good idea - Execution? Be careful
I've had one of these units installed on my mash tun for about a year. I've always been a little uneasy about how accurate the readings were. I finally got around to doing a side-by-side test of all the various thermometers in my kitchen/brewing drawer. I took readings at tap water temperature of 64F and heated to 164F.

Results of the test ended up with the Fermetap thermometer within 1 degree F of the digitals, but only after I tapped it and it jumped 10 degrees! This is probably a concern only with thermometers with an internal mechanism that can hang up. Although the final temperature was close enough, the fact that it hung up concerned me.

The conclusion I can to is that although it is convenient to have the big dial thermometer on the outside of the tun, there is no substitute for a very accurate digital probe in the middle of the mash.
February 27, 2014
Rated 5 out of 5
3inch Thermometer
I like to have a analog Thermometer to provide a fail safe mechanical reading - easy to view!
May 28, 2013